i836 - SouthernLINC Wireless

Transcription

SouthernLINC Wireless
iDEN
Digital Multi-service Data-capable Phone
i836 Phone User’s Guide
@NNTN6242A@
NNTN6242A
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use with
the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden/support.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
Contents
Getting Started........................................... 1
Removing the Battery Door ...............................3
Locating Your SIM Card ....................................3
Battery ...............................................................4
Activating Service..............................................7
Powering On and Off.........................................7
Enabling Over-the-Air Security..........................8
Finding Your Phone Number and LINC ID ........8
Phone Basics ....................................................9
SIM Card Security ...........................................12
Antenna ...........................................................15
Accessories .....................................................16
For More Information.......................................16
Making Calls............................................. 17
Phone Calls .....................................................17
InstantLINC Mobile to Mobile Calls .................17
Receiving Calls................................................18
Ways to Enter Calls.........................................18
Missed Phone Calls.........................................21
Using Speakerphone.......................................21
Using Mute ......................................................21
Making Emergency Phone Calls .....................22
Call Alerts..................................................23
Sending Call Alerts..........................................23
Receiving Call Alerts .......................................23
Using the Call Alert Queue..............................23
Recent Calls ..............................................25
Calls and Call Alerts ........................................25
My Info From Other Phones ............................25
Contact Information From Other Phones ........26
Viewing the Recent Calls List..........................26
Storing Items to Contacts ................................27
Deleting Items .................................................27
Making Calls From the Recent Calls List ........28
Contacts ....................................................30
Viewing Contacts ............................................31
Creating Entries ..............................................32
Storing Numbers From the Idle Screen...........33
Editing Entries .................................................34
i
Deleting Entries ...............................................34
Checking Capacity ..........................................34
Creating Pauses and Waits.............................34
International Numbers .....................................35
Accessing Contacts with GSM Phones ...........35
Group Calls ...............................................46
Call Forwarding........................................ 36
Memo .........................................................48
Forwarding All Calls ........................................36
Turning Off Call Forwarding ............................36
Forwarding Missed Calls .................................37
Viewing Call Forwarding Settings....................37
Advanced Calling Features..................... 38
Call Waiting .....................................................38
Switching Between Calls .................................38
Putting a Call on Hold......................................39
Calling 2 People ..............................................39
Creating Pauses and Waits While Dialing.......40
Setting One Touch PTT...................................40
Setting Flip Actions..........................................41
Call Timers ......................................................41
Using Your Phone as a Modem ......................42
Making TTY Calls ............................................43
ii
Joining a Talkgroup .........................................46
Making Group Calls.........................................46
Receiving Group Calls ....................................46
Turning off Group Calls ...................................46
Ring Tones ................................................49
Setting Your Phone to Vibrate.........................49
Ring and Vibrate .............................................50
Assigning Ring Tones to Contacts ..................50
Viewing Ring Tone Assignments ....................50
Downloading More Ring Tones .......................51
Managing Memory ..........................................51
Deleting Custom Ring Tones ..........................51
Entering Text ............................................52
Using Alpha Mode ...........................................52
Using Word Mode ...........................................52
Special Function Keys.....................................53
Using Numeric Mode.......................................54
Using Symbols Mode ......................................54
Messages ................................................. 55
Using LINC View .......................................65
Message Notifications .....................................55
Message Center ..............................................56
Sending My Info and Contact Information .......65
Voice Mail Messages ............................... 57
Receiving a Message ......................................57
Accessing Voice Mail from
the Message Center ...................................57
Sending Unanswered Calls to Voice Mail .......57
Text Messages ......................................... 58
Setting Up........................................................58
Receiving a Message ......................................58
Reading from the Message Center .................59
Creating and Sending Messages ....................59
Sorting Messages............................................62
Managing Memory...........................................62
My Info ...................................................... 63
Viewing My Info ...............................................63
Editing My Info.................................................63
Setting Sending Options..................................64
Datebook ...................................................68
Viewing Datebook ...........................................68
Creating Events...............................................69
Editing Events .................................................71
Deleting Events ...............................................71
Receiving Reminders ......................................72
Making Calls From Datebook ..........................73
Customizing Datebook Setup..........................73
Java Applications .....................................75
Installing Applications......................................75
Running Applications ......................................75
Suspending Applications .................................75
Resuming Applications....................................76
Ending Applications.........................................76
Downloading Applications ...............................76
Deleting Applications.......................................76
Managing Memory ..........................................77
Shortcuts on the Main Menu ...........................77
Java Applications and GPS Enabled ..............78
iii
GPS Enabled ............................................ 81
Profiles ......................................................99
IMPORTANT: Things to Keep in Mind ............81
Making an Emergency Call .............................82
Viewing Your Approximate Location ...............83
Enhancing GPS Performance .........................84
Setting Privacy Options ...................................86
Using GPS with Map Software ........................87
Viewing Profiles...............................................99
Switching Profiles ............................................99
How Changing Settings Affects Profiles..........99
Temporary Profiles ........................................100
Creating Profiles............................................101
Editing Profiles ..............................................101
Deleting Profiles ............................................101
Setting Call Filtering ......................................102
Voice Records.......................................... 90
Creating Voice Records ..................................90
Playing Voice Records ....................................90
Labeling Voice Records ..................................90
Deleting Voice Records...................................91
Locking Voice Records....................................91
Managing Memory...........................................91
Shortcuts.................................................103
Creating a Shortcut .......................................103
Using a Shortcut............................................103
Editing a Shortcut ..........................................104
Deleting Shortcuts .........................................104
Customizing Your Phone ........................ 92
Using a Headset .....................................105
Setting the Volume ..........................................92
Setting Your Phone to Vibrate.........................92
Changing the Look of Your Phone ..................92
Airplane Mode — Temporarily Turning Off Calls.
94
Using Settings .................................................94
Attaching a Headset......................................105
Using a Remote PTT Button .........................105
iv
Understanding Status Messages ..........106
Safety and General Information ............109
RF Operational Characteristics .....................109
Portable Radio Product Operation and EME
Exposure...................................................109
Electromagnetic Interference/Compatibility...112
Medical Devices ............................................112
Operational Warnings....................................113
Operational Cautions.....................................114
Accessory Safety Information........................115
MOTOROLA LIMITED WARRANTY ...... 117
Limited Warranty
Motorola Communication Products
(International) ..................................... 121
Patent and Trademark Information ...... 125
Index ....................................................... 126
v
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i836
Model Number: H74XAH6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
vi
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Getting Started
retractable
antenna
volume
controls
light sensor
Push-To-Talk
(PTT) button
audio jack
speaker
(in back)
microphone
accessory connector
1
Getting Started
p
Power button.
Navigation key — press the arrows to
scroll through menus and lists.
2
O
OK key — selects highlighted item;
answers calls.
m
Menu key — accesses context-sensitive
menus.
A
Option key — selects the option
appearing above it on the display.
s
Send key — places phone calls.
e
End key — ends phone calls; returns to
idle screen.
t
Acts like s when the flip is closed; turns
speaker on; used with voice names and
voice records.
.
Acts like e when the flip is closed;
accesses recent calls; sends incoming
calls to voice mail.
To start using your i836 phone:
•
•
•
•
Make sure your SIM card is in place.
Charge the battery.
Activate your service.
Enable over-the-air security if you are prompted
to.
Removing the Battery Door
Removing the Battery Door
Locating Your SIM Card
1 Make sure the phone is powered off. See
“Powering On and Off” on page 7.
2 Press the release button and pull the battery
door away from the phone.
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
button
SIM card
If your SIM card is not in the SIM card holder, it
may be in the box your phone came in, attached to
a piece of plastic about the size of a credit card. If
this is the case, carefully detach your SIM card
from the surrounding plastic and insert it as
described in “Inserting Your SIM Card” on page 14.
3
Getting Started
If there is no SIM card in your phone or the box,
contact SouthernLINC Wireless at
1-800-406-0151.
3 To replace the battery door, locate the tabs on
the battery door and the slots in the phone.
Battery
Inserting the Battery
1 Remove the battery door.
2 Insert the battery into the battery area. Press the
battery down to secure it.
slots
tabs
4 Place the tabs on the battery door into the slots
on the phone.
4
Battery
5 Move the top of the battery door into place.
Press it over the release button until you hear a
click.
2 Open the connector cover.
connector
cover
3 Plug the other end of the charger into the
accessory connector.
Charging the Battery
Your phone comes with a rapid travel charger.
1 Plug the charger into an electrical outlet.
Charger Attached or Device Attached appears
on the internal display.
5
Getting Started
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
4 If you have purchased optional batteries or
chargers, see “Charging Times”.
Removing the Battery
1 With the phone powered off, remove the battery
door.
2 Remove the battery by lifting it out from the side.
Charging Times
See your battery and charger to determine the
appropriate charging time.
Battery
Slim SC
Charger
Rapid
Standard
2 hours
3 hours
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Prolonged charging is not recommended.
6
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
Activating Service
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Activating Service
The first time you power on your phone, you must
be in your local calling area. This activates your
service.
Powering On and Off
To power your phone off:
1 Open the flip.
2 Press and hold p.
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 12.
Press A under Ok.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see “Changing the PIN” on page
12).
The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1 Open the flip.
2 Press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn on
Airplane mode. See “Airplane Mode —
Temporarily Turning Off Calls” on page
94.
7
Getting Started
Note: If you press A under Later, you will be
prompted to enable security each time
you power on your phone until you press
A under Ok.
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
2 Press A under Ok.
3 You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to the appropriate SouthernLINC
Wireless plan, your home page appears.
4 Press e to return to the idle screen.
Finding Your Phone Number
and LINC ID
Enabling Over-the-Air
Security
If you are set up to receive over-the-air
programming from SouthernLINC Wireless, you
must enable security the first time you power on
your phone or within 10 days of first activation of
your phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
8
My Info lets you view your phone number, LINC ID,
and other phone information:
1
2
3
4
Press m to access the main menu.
Scroll to My Info.
Press O.
Scroll to see your information.
• Line 1 and Line 2 are your phone numbers.
• LINC ID is the number that others use to
contact you using InstantLINC Mobile to
Mobile calls. It is filled in when you receive
your first InstantLINC Mobile to Mobile call.
See “My Info” on page 63 for more information
about this feature.
Phone Basics
Phone Basics
Display Options
Any time your phone is powered on, the display
provides you with information and options.
Two display options appear at the bottom of most
screens. You select a display option by pressing
the option key below it.
The external display shows a shortened version of
the internal display. To see more information, open
the flip.
status icons
text area
menu icon
display options
Menus and Lists
Your phone’s features are arranged in menus,
submenus, and lists.
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
In this guide, this symbol > tells you to select a
menu or list item. For example, Settings >
Security means:
The screen shown is the idle screen The idle
screen appears when your phone is on, but not
engaged in any activity.
1
2
3
4
Scroll to Settings on the main menu.
Press O to see the Settings screen.
Scroll to Security.
Press O to see the Security screen.
Text Area
OK Key
This area displays menus, messages, names,
phone numbers, and other information.
Pressing O:
• Selects the highlighted menu item or list item
• Sets options
9
Getting Started
• Confirms actions
• Places and answer calls
e Messages
Access messages. See
page 55.
Menu Key
f Call Forward
Set call forwarding options.
See page 36.
o Datebook
Schedule appointments.
See page 68.
g Memo
Store a number to access
later. See page 48.
h Call Timers
Phone usage information.
See page 41.
i Recent Calls
Lists recent calls. See
page 25.
Many features provide context-sensitive menus
that let you access related features and actions.
This icon S appears any time a context-sensitive
menu is available. Press m to access the menu.
Main Menu
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons.
a Browser
Browse the Web.
s Shortcuts
q Java Apps
Java applications on your
phone. See page 75.
Create shortcuts to
screens. See page 103.
j My Info
b Settings
Customize your phone.
See page 92.
View personal phone
information, including
phone number and LINC
ID. See page 8.
c VoiceRecord
Record and play audio
messages. See page 90.
p Profiles
d Contacts
Create, view, store, and
edit Contacts. See
page 30.
Groups of settings you
apply together. See
page 99.
k Call Alert
Lists call alerts. See
page 23.
10
Phone Basics
l GPS
Find your approximate
geographical location. See
page 81.
m Ring Tones
Assign ring tones and turn
ringer off. See page 49.
Quick Access to Main Menu Items
Each arrow in the navigation key and O can be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when you receive your phone. To
assign different main menu items, see “Personalize
Features” on page 96.
Status Icons
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
abcd
efgd
Battery Strength — A fuller battery
indicates a greater charge.
opqr
s
Signal Strength — More bars next
to the antenna indicate a stronger
signal.
A
Phone In Use — Your phone is
active on a phone call.
B
InstantLINC Mobile to Mobile In
Use — Your phone is active on an
InstantLINC Mobile to Mobile call.
C
Talkgroup In Use — Your phone is
active on a group call.
2
Active Phone Line — 1 indicates
phone line 1 is ready to make calls;
2 indicates phone line 2 is ready to
make calls.
G J
H K
I L
Call Forward — Your phone is set
to forward calls. See page 36.
u M Q
Ringer Off — Your phone is set not
to ring. See page 49.
w xT
yz
Messages — You have one or
more messages. See page 55.
DE
Internet — You are ready to
browse the internet.
U
Airplane Mode — Your phone is
set to airplane mode. See page 94.
1
11
Getting Started
Y Z
N
t
O
Packet Data — You are ready to
transfer packet data or are
transferring packet data. See
page 42.
TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See page 43.
Roaming — You are using your
phone outside of the SouthernLINC
Wireless network.
SIM Card Security
Your SIM card protects your personal information.
The SIM card stores all your Contacts information.
Since this information is stored on your SIM card,
not in your phone, you can remove the information
by removing your SIM card.
Note: Except for making emergency calls, your
phone will not function without the SIM
card.
To prevent unauthorized use of your phone, your
SIM card may be protected by a PIN that you enter
each time the phone is powered on. You can
change the PIN or turn off the requirement that it
be entered.
12
Entering the PIN
You may be required to enter a SIM PIN when you
first use your phone.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card.
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact
SouthernLINC Wireless at
1-800-406-0151. See “Unblocking the
PIN” on page 13.
1 When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for
each character entered.
2 Press A under Ok.
Changing the PIN
1 From the main menu, select Settings >
Security > Change Password > SIM PIN.
2 At the Enter Old SIM PIN screen, enter the
current SIM PIN.
3 Press A under Ok.
4 At the Enter New SIM PIN screen, enter the
new 4- to 8-digit SIM PIN.
5 Press A under Ok.
SIM Card Security
6 At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
7 Press A under Ok.
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency calls.
When the PIN requirement is off, your phone can
be used without entering a PIN.
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
Security > SIM PIN.
2 Select On or Off.
3 Enter the current SIM PIN.
4 Press A under Ok.
Unblocking the PIN
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact SouthernLINC Wireless at
1-800-406-0151 to get a PIN Unblock Code (PUK).
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
SouthernLINC Wireless. Except for
making emergency calls, your phone
will not function with a blocked SIM
card.
To unblock the PIN:
1 Press * # m 1.
2 At your SouthernLINC Wireless representative’s
request, provide the information needed to give
you a PUK code.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4- to 8-digit SIM PIN.
6 Re-enter your SIM PIN.
If you entered the codes properly, SIM Unlocked
appears on the display.
13
Getting Started
Inserting and Removing Your SIM
Card
Important: Do not touch the gold-colored areas of
your SIM card.
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases
other information. If you remove your SIM card and
use it with another phone, or use another SIM card
with your phone, the following information is
erased:
•
•
•
•
•
•
•
•
•
•
The recent calls list
Call forwarding settings
Net alerts
Text Message drafts, outbox messages, and
customized quick notes
Information stored in Memo
3 most recent GPS Enabled locations
Voice records
Voice names
Datebook events
Options set using the Personalize menu
14
Inserting Your SIM Card
1 With your phone powered off, remove the
battery door and battery.
2 Open the SIM card holder.
Antenna
3 Carefully slide your SIM card into the SIM card
holder.
5 Lock the SIM card holder: While holding the
bottom of the SIM card holder in place with one
finger, gently press the top of the holder until you
hear the holder click into place.
Hold here.
Press here.
4 Close the SIM card holder.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
Antenna
The retractable antenna on your i836 phone is
designed to be extended during calls.
To extend the antenna, pull gently on the rounded
tip until the antenna is fully extended and clicks into
position.
15
Getting Started
When finished with a call, retract the antenna by
pushing gently on the rounded tip until the antenna
clicks into place.
To optimize your phone’s performance, extend the
antenna when you make or receive a call, and
avoid touching the antenna with any body part.
Accessories
To order accessories, log on to the SouthernLINC
Wireless website at www.southernlinc.com/store or
contact your SouthernLINC Wireless
representative.
For More Information
If you have questions about your i836 phone,
contact your or sales representative or
SouthernLINC Wireless at 1-800-406-0151.
Important: Failure to fully extend or retract the
antenna until the antenna clicks into
place causes severely degraded
performance, which may result in
missed calls, dropped calls, or garbled
audio.
16
Making Calls
Your i836 phone makes two types of calls: digital
cellular phone calls and InstantLINC Mobile to
Mobile calls. With InstantLINC Mobile to Mobile
calls, you use your phone as a long-range, digital
walkie-talkie.
With the Flip Closed
1 Select the number you want to call from the
recent calls list and press t (see “From the
Recent Calls List” on page 19). -orUse a voice name to select the number and
place the call (see “Using a Voice Name” on
page 20).
Phone Calls
2 To end the call, press ..
With the Flip Open
InstantLINC Mobile to Mobile
Calls
1 Enter the number you want to call.
2 To place the call:
Press s. -orIf you entered the number from the idle screen,
press O.
3 To end the call:
Press e. -orClose the flip.
To end a call by closing the flip, you must have the
Flip to End feature turned on. See “Setting Flip
Actions” on page 41.
1 If the flip is open, enter the LINC ID you want to
call. -orIf the flip is closed, select the number as you
would when making a phone call.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 Release the PTT button to listen.
Tip: To let someone know you want to talk to
him or her on an InstantLINC Mobile to
Mobile call, send a call alert. See “Call
Alerts” on page 23.
17
Making Calls
Receiving Calls
Ending
If the flip is closed, press .. -or-
Phone Calls
Press e. -or-
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
If the flip is closed, press t. -orOpen the flip. -orPress s. -orPress O. -orPress A under Yes. -orPress any number key.
To answer a call by opening the flip, you must have
the Flip to Ans feature turned on (see “Setting Flip
Actions” on page 41). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Customizing Your Phone”
on page 92).
Sending to Voice Mail
If the flip is closed, press .. -orPress e. -orPress A under No.
18
Close the flip.
Ways to Enter Calls
•
•
•
•
•
•
•
•
Use the numbers on the keypad
Select the number from the recent calls list
Select the number from Contacts
Select a number stored in Datebook
Redial the last phone number called
Say a voice name into your phone
Use Speed Dial or Turbo Dial®
Use One Touch PTT to make an InstantLINC
Mobile to Mobile call
• Use a TTY device — see “Making TTY Calls” on
page 43
From the Keypad
To enter the number you want to call, press the
numbers on the keypad.
If you make a mistake:
• To clear a digit, press A under Delete.
Ways to Enter Calls
• To clear all digits, press and hold A under
Delete.
• To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
• To cancel, press e.
From the Recent Calls List
The recent calls list stores the last 20 calls you
made or received.
With the Flip Open
1 From the main menu, select Recent Calls.
2 Scroll to the name or number you want to call.
1 Press . to display the most recent call.
2 To view the rest of the recent calls list, press the
volume controls.
You can call the number displayed by pressing t
on the top of your phone.
From Contacts
2 Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3 Place the call now. -orScroll left or right to display the Contacts type for
the number you want to call.
If you are making an InstantLINC Mobile to Mobile
call, your phone places the call to the LINC ID
stored in the Contacts entry, even if the
InstantLINC Mobile to Mobile icon is not displayed.
If you are making a phone call:
• Your phone places the call to the phone number
assigned to the Contacts type displayed.
• If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
• If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
If you have numbers stored in Contacts, you can
use these numbers to make calls. For information
on entering numbers into Contacts, see “Creating
Entries” on page 32.
1 From the main menu, select Contacts.
19
Making Calls
From Datebook
If you have numbers stored as part of events in
Datebook, you can use these numbers to make
calls. For information on storing events in
Datebook, see “Datebook” on page 68.
1 From the main menu, select Datebook.
2 Select the day of the event containing the
number you want to call.
3 Highlight or select the event containing the
For details, see “Making Calls From Datebook” on
page 73.
Redialing the Last Number
Press and hold s to place a call to the last phone
number you called.
Using a Voice Name
If you have created a voice name in Contacts for
the number you want to call, say the voice name
into your phone to enter the number. See page 31
for information on voice names.
You can use a voice name to enter a number.
20
You can use a voice name to enter a number with
the flip open or closed.
1 Press and hold t until a prompt appears
telling you to say the voice name.
2 Speaking into the microphone, say the voice
name assigned to the number you want to call.
Your phone plays the name back to you.
If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press . if the flip is closed or press e.
If you are making an InstantLINC Mobile to Mobile
call, press and hold the PTT button to place the
call.
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number which you can use to call that
number.
Speed Dial
1 From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
2 Press #.
3 Press s.
Missed Phone Calls
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
Using One Touch PTT
One Touch PTT sets your phone to call the most
recent LINC ID on the recent calls list, or a LINC ID
you choose, every time you press the PTT button.
See “Setting One Touch PTT” on page 40.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
With the Flip Open
To turn speakerphone on or off:
Press A under Spkr. -orPress t.
Missed Phone Calls
When you miss a call, this icon V and the number
of phone calls you have missed appear briefly.
When you make a call with the flip closed,
speakerphone is always on.
With the Flip Open
Opening the flip turns speakerphone off.
If you want to dismiss the missed call message,
press A under Back. -or-
Using Mute
If you want to view the missed call on the recent
calls list, press A under View.
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
If you want to dismiss the missed call message,
press ..
If you want to view the missed call on the recent
calls list, press . twice.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
21
Making Calls
To turn mute off:
Press A under Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
81, and particularly “IMPORTANT: Things to Keep
in Mind” on page 81 and “Making an Emergency
Call” on page 82, for more information on the
limitations of this feature. Because of the
limitations of this feature, always provide your best
knowledge of your location to the emergency
response center when you make an emergency
call.
22
Important: Emergency calls cannot be placed while
the keypad is locked.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
Call Alerts
Receiving Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on an InstantLINC Mobile
to Mobile call.
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or InstantLINC Mobile to Mobile calls until you do.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or LINC ID.
To answer a call alert:
The recipient can:
To queue a call alert:
• Answer — begin an InstantLINC Mobile to
Mobile call with the sender
• Queue — store the call alert to the call alert
queue, which is a list of call alerts
• Clear — dismiss and delete the call alert
Sending Call Alerts
1 Enter the LINC ID you want to send to, as you
would when making an InstantLINC Mobile to
Mobile call.
2 Press A under Alert. Ready to Alert appears
on the display.
3 Press the PTT button until Alert Successful
Note: If the alert is not successful, this may
mean the person you are trying to reach is
on a call or has the phone turned off.
Press the PTT button to make an InstantLINC
Mobile to Mobile call to the sender.
Press A under Queue.
To clear a call alert:
Press O. -orPress A under Clear. -orIf the flip is closed, press ..
Note: The recent calls list also stores call alerts
you have received. They appear as
InstantLINC Mobile to Mobile calls. Call
alerts remain in your recent calls list until
you delete them or until they reach the
end of the list.
Using the Call Alert Queue
When you queue a call alert, it remains in the call
alert queue until you make an InstantLINC Mobile
to Mobile call to the sender or delete it.
23
Call Alerts
1 From the main menu, select Call Alert.
2 Scroll through the list.
3 Press A under Alert. Ready to Alert appears
on the display.
4 Press the PTT button until Alert Successful
Viewing Date and Time
Deleting Call Alerts
To view the date and time a call alert was received:
To delete a call alert from the queue:
2 Select the call alert you want information on.
1 From the call alert queue, scroll to the call alert
you want to delete.
2 Press m.
3 Select Delete.
4 Press O or press A under Yes to confirm.
Viewing Call Alerts
Responding to Call Alerts in the
Queue
After you queue a call alert, you can respond to it
by making an InstantLINC Mobile to Mobile call to
the sender or sending a call alert to the sender.
Making an InstantLINC Mobile to Mobile call to
the Sender
To delete all call alerts from the queue:
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
2 Scroll to the call alert you want to respond to.
3 Press the PTT button to begin the call.
Sorting Call Alerts
This removes the call alert from the queue.
To sort call alerts by the order they were received:
Sending a Call Alert to the Sender
1
2
3
4
2 Scroll to the call alert you want to respond to.
24
Tip: You must have at least one call alert in the
queue to access this feature.
From the main menu, select Call Alert.
Press m.
Select Sort By.
Select First on Top or Last on Top.
Recent Calls
The recent calls list stores information associated
with calls you have made and received and call
alerts you have received. The recent calls list also
stores My Info and contact information sent to you
from other phones.
Call alerts you have received appear as
InstantLINC Mobile to Mobile calls. Like all items in
the recent calls list, they remain listed until you
delete them or until they reach the end of the list.
For phone calls, an additional icon appears giving
information about the call:
The recent calls list stores up to 20 items.
X A call you made.
Calls and Call Alerts
W A call you received.
The recent calls list stores the numbers of up to 20
of the most recent calls you have made and
received.
V A missed call. Missed calls appear on the
If the number of a recent call is stored in Contacts,
the following information appears:
• The name assigned to the number
• The Contacts type icon associated with the
number. If the Contacts entry containing the
number has more than one number or address
stored, <> surrounds the Contacts type icon. For
information on Contacts types, see page 30.
The LINC ID Contacts type icon appears when you
receive an InstantLINC Mobile to Mobile call or call
alert, even if the number is not stored in Contacts.
recent calls list only if you have Caller ID.
When you select a call to view its details, you see
information such as the name associated with the
call, the number, date, time, and duration of the
call.
My Info From Other Phones
The recent calls list stores My Info from other
phones. See “Sending My Info and Contact
Information” on page 65.
This icon j appears with My Info from other
phones on the recent calls list, along with the LINC
ID of the person who sent the information.
25
Recent Calls
When you select My Info from other phones to view
its details, you see all the information sent.
If you receive My Info from the same phone more
than once, only the most recently sent version
appears in the recent calls list.
Contact Information From
Other Phones
The recent calls list stores contact information sent
from other phones. This information comes from
the other phone’s Contacts list or recent calls list.
See “Sending My Info and Contact Information” on
page 65.
The name or LINC ID of the person who sent the
contact information appears as a separate item on
the recent calls list, above the information sent. If
one person sends you more than one item of
contact information, all the items appear below the
person’s name or LINC ID.
When you select contact information to view its
details, you see the name or LINC ID of the person
who sent the information and all the information in
the item.
If you receive contact information with the same
name from the same phone more than once, only
the most recently sent version appears in the
recent calls list.
This icon d appears with contact information on
the recent calls list.
Viewing the Recent Calls List
Contact information in the recent calls list displays:
With the Flip Open
• The name contained in the contact information
• The Contacts type icon associated with the
number or address contained in the contact
information. If the item contains more than one
number or address stored, <> surrounds the
Contacts type icon.
2 Scroll through the list.
To view the details of an item on the list:
From the recent calls list, select the item you
want information on.
Tip: To view the details of more items, keep
scrolling.
26
Storing Items to Contacts
1 Press ..
2 If you want to view the rest of the recent calls
list, press the volume controls.
3 Press . to dismiss the recent calls list.
Storing Items to Contacts
1 From the recent calls list, scroll to or select the
item you want to store.
2 Press A under Store. -orIf Store is not one of your options: Press m.
Select Store or Update Contacts.
Tip: If the item you want to store is a call, Store
does not appear if the number is already
stored in Contacts.
3 To store the item as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
Note: Storing My Info or contact information
from another phone to a Contacts entry
that has a name assigned to it does not
change the name of the Contacts entry.
With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
5 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 32.
6 Press A under Done.
Deleting Items
To delete an item from the recent calls list:
1 From the recent calls list, scroll to or select the
item you want to delete.
2 Press A under Delete. -orIf Delete is not one of your options: Press m.
Select Delete.
To delete all items on the recent calls list:
1 From the recent calls list, press m.
2 Select Delete All.
4 If the item you want to store is a call, you must
assign a Contacts type to the number:
27
Recent Calls
Making Calls From the Recent
Calls List
With the Flip Open
2 Scroll to the item containing the number you
want to call.
• If you scroll to a call, you can make a call to
the number that made the call. If the number
is stored in Contacts, you can make a call to
any of the numbers stored with it.
• If you scroll to My Info from another phone,
you can make a call to the LINC ID of the
phone that sent the information.
• If you scroll to contact information from
another phone, you can make a call to any of
the numbers in the contact information.
3 To place the call now, go to step 4. -orScroll left or right to display the Contacts type for
the number you want to call.
4 To make a phone call, press s. -orTo make an InstantLINC Mobile to Mobile call,
press the PTT button.
28
You can also make calls while viewing the details
of an item on the recent calls list:
1 From the recent calls list, select the item
containing the number you want to call.
• If you select a call or contact information from
another phone, you can make a call to the
number shown first on the details screen.
1 Press . to display the most recent call.
2 Press the volume controls to scroll to the name
or number you want to call.
• If you scroll to a call, you can make a call to
the number that made the call.
• If you scroll to contact information from
another phone, you can make a call to the
number currently displayed.
Making Calls From the Recent Calls List
3 To make a phone call, press t on the top of
your phone. -orTo make an InstantLINC Mobile to Mobile call,
29
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your
SIM card.
A Contacts entry contains:
• A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
• A ring tone — You can assign a ring tone to
each entry. This is the sound your phone makes
when you receive phone calls or call alerts from
any of the numbers stored in the entry.
• A Contacts type — Each number or address
stored must be assigned a Contacts type:
A
Mobile
phone number
B
LINC ID
LINC ID number
C
Work1
phone number
D
Work2
phone number
E
Home
phone number
F
Email
email address
G
Fax
phone number
H
Pager
phone number
I
Talkgroup
Talkgroup number
J
IP
IP address
K
Other
phone number
• A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, LINC ID number,
Talkgroup number, email address, or IP address.
30
Viewing Contacts
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
“Creating Pauses and Waits” on page 34.
• A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon P
appears to the left of the Contacts type icon if a
voice name is assigned.
Viewing Contacts
To access Contacts:
From the main menu, select Contacts. -orIf you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you
want to view.
2 If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
3 Press O to view the entry.
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press A under Search.
-orIf Search is not one of your options: Press m.
Select Search.
2 Enter the name you want to see.
3 Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only LINC IDs and
Talkgroups
To set Contacts to show only entries that contain
LINC IDs, and Talkgroups:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
31
Contacts
2 Select Filter.
3 Set this option to Show All.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
Tip: Press A under Browse to select a name
already in Contacts.
3 If you want to assign a ring tone to the name:
Select Ringer.
Select the ring tone you want to assign.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5 To store a number or address:
To cancel a Contacts entry at any time press, e to
return to the idle screen.
Select the # field (or ID for an email address, or
IP for an IP address).
To create a Contacts entry:
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 52.
1 To access the entry details screen:
Select Contacts > [New Contact]. -orFrom the Contacts list, press m. Select New
Contact.
2 If you want to assign a name to the entry:
Select Name.
Enter the name. When you are finished,
press O.
32
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6 If you want to assign more options to the
number, select [Options]. See “Assigning
Options” on page 33.
Storing Numbers From the Idle Screen
7 If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 2 through step 6. You must assign a
name to the entry, if you have not already.
Assigning Options
1 If you have not already, select [Options].
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press O.
Press A under Delete to delete the current
Speed Dial number.
Enter the new Speed Dial number using the
keypad.
3 If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
4 When you are finished, press A under Back.
Storing Numbers From the
Idle Screen
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
3 Select Store Number.
4 To store the number as a new entry, select [New
the entry.
5 With the Contacts type field highlighted, scroll
33
Contacts
Editing Entries
want to edit.
2 Press A under Edit. -orIf Edit is not one of your options: Press m.
Select Edit.
The entry details screen displays.
3 Follow the applicable instructions in “Creating
Entries” on page 32 to edit the various fields.
Deleting Entries
Delete an Entry
2 Scroll left or right to display the Contacts type for
the number you want to delete.
3 Press m.
4 Select Delete Number.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
Checking Capacity
To see how many numbers are stored in Contacts:
2 Select Capacity.
want to delete.
2 Press m.
3 To delete the entire entry, select Delete
Contact.
Creating Pauses and Waits
Delete a Number or Address
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
34
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
International Numbers
To program a pause:
Press and hold * until the letter P appears.
The P represents a 3-second pause.
International Numbers
For more information, contact your SouthernLINC
Wireless sales representative.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
Accessing Contacts with GSM
Phones
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
If you plan to use the information stored in
Contacts with an i2000, i2000plus, or any other
GSM phone, download iDEN Phonebook Manager.
To program a wait:
Go to idenphones.motorola.com/iden/support for
more information.
Press and hold * until the letter W appears.
The W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
You can use iDEN Phonebook Manager to make
the Contacts information saved to your i836
phone’s SIM card accessible in this type of phone.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 40.
35
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call. You can forward phone lines 1 and 2
independently.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
G Phone line 1 is active; calls to phone line 1
are being forwarded.
I Phone line 1 is active; calls to phone line 2
H Phone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
J Phone line 2 is active; calls to phone line 1
L Phone line 2 is active; calls to phone line 2
K Phone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
36
To forward all calls:
1 From the main menu, select Call Forward >
Forward > All Calls.
2 Select To.
If you specified a forwarding number for all calls
before, this number displays.
To forward calls to this number, press A under
Back.
To delete this number, press O, then press and
hold A under Delete.
3 To enter the number you want to forward calls to:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
4 Press O.
All your calls are now forwarded to the number you
specified.
Turning Off Call Forwarding
If you don’t want all your calls forwarded, turn the
feature off:
1 From the main menu, select Call Forward > To.
2 Set this option to Off.
Forwarding Missed Calls
All your calls are now sent to your phone.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with
SouthernLINC Wireless.
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
• If Busy — Your phone is on a call or transferring
data.
• If No Answer — You do not answer on the first
4 rings.
• If Unreachable — Your phone is out of
coverage or powered off.
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your
voice mail access number.
To forward missed calls:
Forward > Detailed.
2 Select If Busy to specify a forwarding number
for calls received when your phone is busy.
3 If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press A under
Back and go to step 6. -orTo delete this number, press O, then press and
hold A under Delete.
4 To enter the number you want to forward this
type of call to:
want to enter.
5 Press O.
6 Repeat step 2 through step 5 for If No Answer
and If Unreachable.
7 When you are finished, press A under Back.
Viewing Call Forwarding
Settings
Forward > All Calls.
2 With To highlighted, press A under Status.
37
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
To accept the second call and put the active call on
hold:
Press A under Yes.
To accept the second call and end the active call:
1 Press e.
Your phone rings with the second call.
2 Answer the second call.
To decline the second call:
Press A under No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
38
Turn Off Call Waiting
To turn off Call Waiting during a call:
1 Press m.
2 Select In Call Setup > Call Waiting.
Tip: To turn Call Waiting back on while still on
the call, set this option to On.
To turn off Call Waiting for the next call you make
or receive:
1 From the main menu, select Settings > Phone
Calls > Call Waiting.
Call Waiting is turned back on when you end the
call.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Press A under Switch. -orIf Switch is not one of your options: Press m.
Select Switch.
Putting a Call on Hold
Putting a Call on Hold
Merging 2 Calls into a 3-Way Call
1 While on an active call, press m.
2 Select Hold.
After you put a call on hold and place a second
call, you can combine these calls into a 3-way call:
If you want to make the call active again, press A
under Resume.
1 Press m.
2 Select Join.
Calling 2 People
All 3 people in the call can speak to and hear each
other.
Putting a Call on Hold, Making a
Second Call
1
2
3
4
Place or receive a phone call.
While the call is active, press m.
Select 2nd Call. This puts the call on hold.
Enter the second phone number you want to
call.
Tip: For quick ways to enter the number,
press m.
Making a 3-Way Call
1
2
3
4
Place or receive a phone call.
While the call is active, press m.
Select 3 Way. This puts the call on hold.
Enter the second phone number you want to
call.
Tip: For quick ways to enter the number,
press m.
5 Press s to place the call.
5 Press s to place the call.
6 Press A under Join.
To end the second call and make the call on hold
active again:
All 3 people in the call can speak to and hear each
other.
Press e.
To make the call on hold active and put the active
call on hold:
Press A under Switch.
39
Advanced Calling Features
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For information on using pauses and
waits, see “Creating Pauses and Waits” on page
34.
To create a pause while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the pause.
2 Press m.
3 Select Insert Pause.
4 Enter the digits you want to occur after the
pause.
To create a wait while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.
Setting One Touch PTT
One Touch PTT sets your phone to call the most
recent LINC ID on the recent calls list, or a LINC ID
you choose, every time you press the PTT button.
40
To set your phone to call the most recent LINC ID
on the recent calls list:
InstantLINC > One Touch PTT.
2 Set this option to Last Call.
To set your phone to call a LINC ID you choose:
InstantLINC > One Touch PTT > Assigned
Number.
2 To enter the LINC ID number you want your
phone to call every time you press the PTT
button:
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3 Press O.
To turn off One Touch PTT:
InstantLINC > One Touch PTT.
Setting Flip Actions
Setting Flip Actions
For Answering Calls
To set your phone to answer calls when you open
the flip:
Calls > Flip Activation > Flip to Ans.
2 Set this option to On.
To set your phone not to answer calls when you
open the flip:
Set Flip to Ans to Off in step 2.
For Ending Calls
To set your phone to end calls when you close the
flip:
Calls > Flip Activation > Flip to End.
To set your phone not to end calls when you close
the flip:
Set Flip to End to Off in step 2.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call.
Call Timers
Call timers measure the duration of your phone
calls, InstantLINC Mobile to Mobile calls or group
calls, and circuit data use, as well as the number of
Kilobytes sent and received by your phone:
• Last Call — displays the duration of your most
recent phone call.
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of
all your phone calls.
• Prvt/Grp Reset — keeps a running total of all of
your InstantLINC Mobile to Mobile calls and
group call minutes, until you reset it.
• Prvt/Grp Lifetime — displays the total minutes
of all your InstantLINC Mobile to Mobile calls
and group calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of
all of your circuit data use.
41
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press O
when you are finished viewing. -or-
Using Your Phone as a Modem
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
To reset a feature: Press A under Reset. Press
O or press A under Yes to confirm.
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
42
connector
cover
Making TTY Calls
2 With the phone’s display facing up, insert a data
cable’s connector into the accessory connector,
until you hear a click.
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i836 phone for packet and
circuit data calls, refer to the Wireless Data
Services User's Guide or contact SouthernLINC
Wireless.
Note: Contact your SouthernLINC Wireless
sales representative for more information
on this feature.
Making TTY Calls
To use your phone to make phone calls using a
teletypewriter (TTY) device:
3 Insert the data plug into the data port of the other
device.
When used as a modem, your phone has these
data transfer modes:
• Circuit data — used for sending and receiving
faxes and for transferring large files
• Packet data — used for small file transfers such
as email
1 Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
end of the cable to your TTY device.
2 Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
N Phone call is active.
O Phone call is on hold.
43
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Turning On the TTY Feature
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
• VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode while not in a call:
Calls > TTY > Type.
2 Select the TTY mode you want.
44
When you make a TTY call, the call begins in the
TTY mode you last selected.
To change mode during a call using your phone:
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
To change mode during a call using your TTY
device, issue one of the following commands:
• “VCO please” — to select VCO mode
• “HCO please” — to select HCO mode
• “HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 92.)
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTY baud rate to 50.0.
Making TTY Calls
To change the TTY baud rate:
Calls > TTY > Baud.
2 Select the baud rate for your location.
45
Group Calls
A group call is similar to an InstantLINC Mobile to
Mobile call, but is made to all members of a
Talkgroup at once. A Talkgroup is a predetermined
group of SouthernLINC Wireless customers.
Before you can make or receive group calls, a
Talkgroup must be established. After the Talkgroup
is established, you must join the Talkgroup.
Joining a Talkgroup
Your sales representative or SouthernLINC
Wireless establishes Talkgroups for you and
assigns each Talkgroup a Talkgroup number. You
can choose a name for each of your Talkgroups
when you create entries for them in Contacts.
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1 Press A under Contcs. -orFrom the main menu, scroll to Contacts and
press O.
2 Scroll to the Talkgroup you want to join.
3 Press A under Join.
Note: You can only monitor one Talkgroup at a
time.
46
Making Group Calls
1 Press #. Then enter the Talkgroup number
using the keypad. -orChoose the Talkgroup name from Contacts or
recent calls list.
2 Proceed as if making an InstantLINC Mobile to
Mobile call.
Receiving Group Calls
To answer a group call:
Proceed as if answering an InstantLINC Mobile
to Mobile call. Only one person at a time may
speak on a group call.
The LINC ID or name of the person who is
speaking will appear on the display below the
Talkgroup number.
Turning off Group Calls
To set your phone to prevent you from hearing
group calls to your Talkgroup:
InstantLINC > Tkgrp Silent.
2 Set this option On.
Turning off Group Calls
To set your phone to let you hear group calls to
your Talkgroup:
Set Tkgrp Silent to Off in step 2.
47
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press O.
To view the memo later:
From the main menu, select Memo.
To delete the memo:
2 Press and hold A under Delete.
3 Press O.
To edit the memo:
2 Enter the new number.
3 Press O.
To make a call to the memo number:
48
To store the memo number to Contacts:
1
2
3
4
From the main menu, select Memo.
Press m.
Select Store to Cntcs.
To store the number as a new entry, select [New
the entry.
5 With the Contacts type field highlighted, scroll
Ring Tones
Setting Your Phone to Vibrate
To set the ring tone your phone makes when you
receive phone calls, call alerts, message
notifications, or Datebook reminders:
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
InstantLINC Mobile to Mobile calls, group calls, call
alerts, message notifications, and Datebook
reminders.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
4 Select the features you want to assign the ring
tone to.
5 When you are finished, press A under Done.
Note: This icon M appears on the display if you
set your phone to neither vibrate nor make
a sound for phone calls.
1 From the main menu, select Ring Tones >
VibeAll.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets VibeAll
to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1
2
3
4
From the main menu, select Ring Tones.
Make sure VibeAll is set to Off.
Select Vibrate from the list of ring tones.
Select the features you want to set to make no
sound.
Note: To set ring options for InstantLINC Mobile
to Mobile calls, and group calls, see
“Setting Your Phone to Vibrate” on page
92.
49
Ring Tones
These icons indicate how the ringer is set.
Q The phone always vibrates instead of making
a sound.
R The phone vibrates instead of making a
sound for phone calls.
u Group calls and InstantLINC Mobile to Mobile
calls are heard through the earpiece, not the
speaker.
These icons may appear at the same time.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
3 Scroll through the list of ring tones and highlight
the one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the features you want to set to ring and
vibrate.
This icon S appears on the display.
50
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
3 Scroll through the list of ring tones and select the
one you want to assign.
4 Select A Contact.
5 Select the Contacts entry you want to assign the
ring tone to.
Viewing Ring Tone
Assignments
1
2
3
4
5
6
Highlight any ring tone.
Press m.
Select Overview.
Scroll to view ring tones assigned to features
and Contact entries.
Downloading More Ring Tones
Downloading More Ring
Tones
If you want to use other ring tones, you can
download them into your phone for a fee. Go to
http://www.southernlinc.com/downloads for a
selection of custom ring tones and downloading
instructions.
Note: Ring tones purchased from this web site
may be downloaded only once. If you
delete a ring tone from your phone, you
must purchase it again to download it
again.
Managing Memory
To view the amount of memory available for
custom ring tones:
1
2
3
4
5
Highlight any ring tone.
Press m.
Select Memory Usage.
Note: Ring tones are stored in your phone using
the same memory space used to store
messages, voice records, Java
applications, pictures, and wallpaper
images. Deleting some of these other
items frees memory for ring tones.
Deleting Custom Ring Tones
Deleting a ring tone from the list of ring tones
deletes it from all parts of your phone, including
Contacts.
To delete a custom ring tone:
1
2
3
4
5
6
Scroll to the ring tone you want to delete.
Press m.
Select Delete.
Press A under Yes to confirm.
Deleting custom ring tones frees memory.
51
Entering Text
Using Alpha Mode
You can enter text, numbers, and symbols into
your phone using Alpha, Word, Numeric, or
Symbol text input modes.
• Press any key on the keypad to enter the letters,
numbers, and symbols on that key. For example,
to enter the letter Y, press 9 three times.
• Type a letter then scroll up to make that letter
uppercase, or type a letter then scroll down to
make that letter lowercase.
• See “Special Function Keys” on page 53 for
more information on adding spaces,
capitalization, and punctuation.
l Alpha — Press a key several times for each
character.
j Word — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
i Symbols — Enter punctuation and other
symbols.
k Numeric — Enter numbers.
When you access a screen that requires you to
enter text, you start in the mode last used.
To choose a text input mode:
1 At a screen that requires you to enter text,
press m.
2 Select the text input mode you want to use. A
checkmark appears next to the current mode.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add you own words to this
database.
Entering a Word
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
For example, to type “test” press 8 3 7
8.
52
Special Function Keys
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
3 If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
Repeat until the desired word appears.
3 Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Spaces
If the desired word does not appear, you can add it
to the database.
Press # for a space.
Adding Words to the Database
When you press and hold the # key, it acts as a
3-way toggle. Press and hold # to make the next
letter typed uppercase (shift), to make all
subsequent letters typed uppercase (caps lock), or
to go back to lowercase letters.
1
2
3
4
Select Alpha as your text input mode.
Type the word using Alpha mode.
Select Word as your text input mode.
Press #.
The word you typed in Alpha text entry mode is
now in the database.
Note: You cannot store alphanumeric
combinations, such as Y2K.
Choosing a Language
To change the language of the database:
1 At a screen that requires you to enter text,
press m.
2 Select Languages.
Capitalization
These icons appear in the top row of your display:
m or X Shift is on.
n or W Caps lock is on.
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
53
Entering Text
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Note: Additional punctuation symbols are
available in Symbols mode.
Using Numeric Mode
1 Select Numeric as your text input mode.
2 Press the number buttons on your keypad to
enter numbers.
Using Symbols Mode
1 Select Symbols as your text input mode.
A row of symbols appears along the bottom of
the phone’s display. Scroll right to view the
complete row.
2 Press O to select the highlighted symbol.
54
Messages
You can receive the following types of messages
on your phone:
•
•
•
•
Voice mail messages
Text messages
Net Alerts
Fax mail
You have 2 ways to access the messages you
receive:
• Respond to the message notification that
appears when the message is received.
• Dismiss the message notification and access
the message later through the message center.
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone
or vibration. You can access the message or
dismiss the notification.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
When you are on a phone call, you can receive
message notifications for all types of messages.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
Calls > Notifications.
2 Select the option you want:
• Receive All — Tones sound during calls for
all types of messages.
• Msg Mail Only — Tones sound during calls
for SMS messages; tones for all other types
of messages are held until you end calls.
• Delay All — Tones for all types of messages
are held until you end calls.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
55
Messages
Message Center
The message center manages your messages.
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1 From the main menu, select Messages.
2 Scroll to the type of message you want to
access.
3 Press O or press A under the display option on
the left.
56
Voice Mail Messages
Note: To receive voice mail messages, you must
first set up a voice mail account with
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
Receiving a Message
If the flip is closed, press .. -or-
When you receive a voice mail message, New
Voice Mail Message appears on the display.
Press A under No.
Press e. -or-
To call the SouthernLINC Wireless voice mail
system and listen to the message:
Press A under Call.
To dismiss the message notification:
If the flip is closed, press .. -orIf the flip is open, press O or press A under
Back, or close the flip.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Accessing Voice Mail from
the Message Center
From the main menu, select Messages > Voice
Mail.
57
Text Messages
Your phone can send and receive short messages
and net alerts.
Setting Up
Before you begin using text messages, you may
need to set up your signature, service center
number, and expiration information:
1
2
3
4
5
From the main menu, select Messages.
Scroll to Text Inbox.
Press m.
Select Text Msg Setup.
Select Signature.
Enter your signature. It may be up to 11
characters long. When you are finished, press
O.
6 Select Srvc Cntr No.
Enter the phone number of your service center.
If you do not know this number, contact
7 Select Expire After.
58
This is the amount of time messages you send
are saved at the service center if they cannot be
delivered. After this period, they are discarded.
Scroll to select the number of days you want
your messages to be saved.
8 Select Auto Clean Up. Set this option to On if
you want your phone to delete sent messages.
If you set Auto Clean Up to On, select Clean
Up After to set the number of days after which
sent messages are deleted or the number of
messages to be kept.
9 Press A under Done to save the information
you entered.
Receiving a Message
To view the message:
Press A under Read.
To dismiss the message notification:
If the flip is closed, press .. -orIf the flip is open, press A under Exit or close
the flip.
Reading from the Message Center
If your phone is powered off when you receive a
text message, or net alert, your phone notifies you
the next time you power it on. If you are out of your
coverage area, your phone alerts you when you
return to your coverage area.
Tip: While reading a text and numeric message
that contains a phone number, you can
press s to call that number.
Reading from the Message
Center
1 From the main menu, select Messages > Text
Inbox.
2 Select the message you want to read. -orPress the number of the message you want to
read.
3 If the message fills more than one screen, scroll
to read it.
Tip: Scrolling through one message lets you
view the next message.
4 To save the message, press A under Ok. -orTo reply to the message, press A under Reply.
-orTo see all other choices, including forwarding
and deleting the message, calling the sender, or
storing the sender’s number in Contacts,
press m.
Creating and Sending
Messages
1 From the main menu, select Messages >
[Create Message]. -orSelect [Create Message] from Text Inbox, Text
Outbox, or Drafts. -orHighlight Quick Notes and press A under
Compose.
Tip: This option is available from many
context-sensitive menus in the message
center.
2 To address the message:
Use the keypad to enter the phone number of
the person you want to send the message to.
-orPress A under Browse. Select Contacts,
want to enter.
3 Enter the text of the message. -or-
59
Text Messages
To use a quick note: Press A under Browse.
Scroll to the quick note you want. For more
information on quick notes, see “Using Quick
Notes”.
4 If you want to send the message, press O or
press A under Send. -orTo delete the message without sending it, press
A under Cancel. -orIf you want to request confirmation of delivery,
save the message as a draft, or set the sending
method, press m. Select the option you want.
Beginning Messages From the Recent
Calls List
1 From the recent calls list, scroll to the name you
want to send a message to.
2 If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
3 Press m.
4 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
5 Follow step 3 through step 4 of “Creating and
Sending Messages” on page 59.
60
Beginning Messages From the Idle
Screen
1 Using the keypad, enter the number you want to
send a message to.
2 Press m.
3 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
4 Follow step 3 through step 4 of “Creating and
Sending Messages” on page 59.
Using Quick Notes
Quick notes are short, pre-written text messages
that you can create, edit, and send. You can store
up to 20 quick notes. A quick note may be up to 30
characters long.
To create a quick note:
1 From the main menu, select Messages > Quick
Notes > [New Note].
2 Press O or press A under Create. Enter text.
-orTo choose from pre-installed notes, select the
note you want.
Tip: For more options, including sending the
quick note, press m.
Creating and Sending Messages
Using Drafts
Deleting Sent Messages
When you save a message as a draft, it is saved in
the drafts folder.
To delete a sent message:
To edit a draft:
1 From the main menu, select Messages >
Drafts.
2 Select the draft you want to edit.
3 To edit the fields you want to change, follow
step 2 through step 4 in “Creating and Sending
Messages” on page 59.
Resending Messages
To resend a message:
Outbox.
2 Scroll to the message you want to resend. -orPress the number of the message you want to
resend.
3 Press s. -orPress m. Select Resend.
Outbox.
2 Scroll to the message you want to delete.
3 Press A under Delete.
4 Press A under Yes to confirm.
To delete all unlocked sent messages:
Outbox.
2 Press m.
3 Select Delete All.
4 Press A under Yes to confirm.
Locking and Unlocking Sent
Messages
When you lock a message, it cannot be deleted
until you unlock it.
Locking a Message
Outbox.
2 Scroll to the message you want to lock or
unlock.
3 Press m.
61
Text Messages
4 Select Lock.
Unlocking a Message
Outbox.
2 Scroll to the message you want to lock or
unlock.
3 Press A under Unlock.
Sorting Messages
You can sort messages in your inbox by sender,
time and date, and status. You can sort messages
in your outbox by recipient, time and date, and
status.
Inbox or Messages > Text Outbox.
2 Highlight any messages.
3 Press m.
4 Select Sort and Order.
5 Select Sort By to specify the sorting method.
6 Select Order By to specify the sorting order.
Managing Memory
Your text inbox, outbox, and drafts folder have a
set amount of memory available for storing
messages.
62
The text inbox holds 20 messages. If the text inbox
is full, you cannot receive messages until you
delete some.
The outbox and drafts folder share memory space.
Together they can hold 30 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some.
To view the amount of memory available in your
text inbox:
Inbox.
2 Press A under Memory.
To view the amount of memory available in your
outbox and drafts folder:
Outbox or Messages > Drafts.
2 Press A under Memory.
My Info
My Info lets you view information about your phone
and send this information to other phones.
Viewing My Info
1 From the main menu, select My Info.
2 Scroll to see the entire screen.
The My Info screen contains:
• My Name — You can enter your name here.
• Line 1 and Line 2 — your phone numbers for
phone lines 1 and 2. Each number appears
when you receive your first call on that line.
• LINC ID — Your LINC ID is the number that
others use to contact you using InstantLINC
Mobile to Mobile. This number appears when
you receive your first InstantLINC Mobile to
Mobile call.
• Group ID — the number of the Talkgroup you
have joined.
• Carrier IP — the IP address assigned to
SouthernLINC Wireless. This number appears
when you register for packet data services.
• IP1 Address and IP2 Address — the IP
addresses you use to access the Internet with
your phone.
• Circuit Data — the number you use if you want
to use your phone to transfer circuit data. See
“Using Your Phone as a Modem” on page 42.
You receive this number from SouthernLINC
Wireless.
Note: If you request equipment-related
transactions on your account,
SouthernLINC Wireless may require you
to provide specific information about your
phone. By pressing m anytime while in
My Info, a submenu will appear that
includes your phone's service status, unit
information, and phone identification
numbers including IMEI, SIM ID, and
Serial Number (SN). Please be prepared
to supply the representative with this
information when requesting these types
of transactions.
Editing My Info
To edit My Info to enter or change the text that
appears in My Name:
1
2
3
4
From the main menu, select My Info.
Press A under Edit.
Select Name.
Enter the name you want to appear. See
“Entering Text” on page 52. When you are
finished, press O.
63
My Info
You can also edit the information in Line 1, Line 2,
and Ckt, but your changes are only temporary. The
next time your phone registers on the network,
your actual phone numbers and circuit data
number appear again in My Info.
Setting Sending Options
Your phone can send information in My Info to
other phones that have this capability.
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every InstantLINC Mobile to Mobile call or only
when you choose to send it.
Information Sent
The information your phone sends always includes
My Name and LINC ID.
It may include Line 1, Line 2, Carrier IP, and
Circuit Data, depending how you set your sending
options.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press m.
3 Select LINC View Setup > Info to Send.
64
4 A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
Automatic Sending
To control whether your information is sent
automatically:
1
2
3
4
Press m.
Select LINC View Setup > Auto Send.
To set your information to be sent automatically,
set this option to On. -orTo set your information to be sent only when you
choose to send it, set this option to Off.
Using LINC View
LINC View lets you exchange My Info and contact
information with other phones that have this
capability. You do this through InstantLINC Mobile
to Mobile calls.
LINC View cannot be used during group calls.
Sending My Info and Contact
Information
When you send My Info or contact information
using LINC View, the information you sent appears
on the display of the phone you are engaged in the
InstantLINC Mobile to Mobile call with. After the
call, the information appears on the recent call list
of that phone.
Sending My Info
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every InstantLINC Mobile to Mobile call or only
when you choose to send it. See “Setting Sending
Options” on page 64.
Tip: When you send My Info, certain
information, such as your email address or
fax number, cannot be included. To send
complete contact information, create an
entry for yourself in Contacts and send.
Sending Information During a Call
1 While in an InstantLINC Mobile to Mobile call,
press m.
2 Select LINC View My Info.
3 When Ready to Send appears on the display,
press the PTT button to send the information.
Starting a Call by Sending Information
1
2
3
4
Press m.
Select LINC View My Info.
Use the keypad to enter the LINC ID you want to
send the information to. -orPress A under Browse. Select Contacts,
want to enter.
65
Using LINC View
Sending Contact Information
You can send contact information by selecting a
Contacts entry or an item from the recent calls list.
Contacts entries that contain only addresses
cannot be sent. When Contacts entries are
received, they do not include ring tones or pictures.
3 Select LINC View Contact.
4 Use the keypad to enter the LINC ID you want to
send. -orPress A under Browse. Select Contacts,
want to enter.
These items from the recent calls list can be sent:
• Contact information sent from other phones
• Calls to or from numbers store in your Contacts
list
Receiving My Info or Contact
Information
Sending Information During a Call
1 While in an InstantLINC Mobile to Mobile call,
press m.
2 Select Contacts or Recent Calls.
3 Scroll to the Contacts entry or item in the recent
calls list you want to send.
Starting a Call by Sending Information
1 From the Contacts list, scroll to or select the
entry you want to send. -orFrom the recent calls list, scroll to or select the
item you want to send.
2 Press m.
66
When you receive My Info or contact information
from another phone, an icon appears on the
display:
j My Info.
d Contact information.
To view the information while still in the
InstantLINC Mobile to Mobile call:
1 Press m.
2 Select View Contact.
You can also view My Info from other phones on
the recent calls list. See “Recent Calls” on page 25.
Sending My Info and Contact Information
Updating Contacts
When you receive a call and see an icon next to
the name of the person who called you, you can
update the contact for that person.
To update the contact:
1 When you see an icon next to a contact, press
m.
2 Select Update Contacts.
3 Press O.
67
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A Datebook event contains:
• A subject — A name you assign to the event.
You can also enter a phone number, LINC ID, or
Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
• A location — The location of the event. You can
also enter a phone number, LINC ID, or
Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
• A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
• A duration — the length of time the event lasts
• A date — The date automatically assigned to an
event is the date that was highlighted or
selected when you began creating the event.
You can change this date before storing the
event.
68
• A repeat — lets you store the event as a
recurring event.
• A reminder — If an event has a start time, you
can set Datebook to remind you that the event is
going to start.
• a ring tone for the reminder
• a profile that your phone is switched to while the
event is occurring
• a Java application that starts when the event
starts
Only the subject and date are required.
Viewing Datebook
To access Datebook:
From the main menu, select Datebook.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
In day view, brief information about each event for
that day appears.
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a
marker in the corner.
Creating Events
To view an event:
Creating Events
1 Select the day the event occurs.
2 Select the event.
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
To change the current view:
You may enter the information in any order by
scrolling through the event details.
1 While viewing Datebook, press m.
2 Select the view you want.
Navigating Datebook
After you have entered the information you want,
you can press A under Done to store the event to
Datebook.
To scroll through Datebook:
If you decide you don’t want to store the event:
Scroll left and right using the navigation key. -or-
Press A under Cancel.
In week view and month view, press * or #.
To create a Datebook event:
To see more in day view:
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
2 Select Go To Today.
To go to any date in Datebook:
2 Select Go To Date.
3 Select the date you want.
1 While viewing datebook, press A under New.
-orIn day view, select [New Event].
2 To assign a subject to the event:
Select Subject.
Enter the name. -orPress A under Browse to choose from
common event names. -orEnter a phone number, LINC ID, or Talkgroup
number. After the event is stored, you can call
this number.
69
Datebook
3 If you want to assign a location to the event:
7 If you want to make the event a recurring event:
Select Location.
Select Repeat.
Enter the location. -or-
Select the repeat cycle you want.
Enter a phone number, LINC ID, or Talkgroup
number. After the event is stored, you can call
this number.
If the event occurs more than once a week:
Select Multiple Day. Select the days you want.
4 The start time automatically assigned to an
event is the beginning of the day. If you want to
change the start time or assign no start time:
Select Start.
Enter the start time you want. -orPress A under No Time to assign no start time.
5 If you want to assign a duration to the event:
Select Duration.
Select the duration you want. -orSelect Custom to enter a duration.
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event. To change the
date of the event:
Select Date.
Enter the date you want.
70
Press A under Done.
Select the date you want this event to stop
recurring.
8 If you want to create a reminder for this event:
Select Reminder.
Select the reminder time you want. -orSelect Custom to enter a reminder time.
Note: If an event has no start time, you can not
create a reminder for it.
9 If you have entered all the information you want
for this event, press A under Done. -orIf you want to assign a ring tone, a profile, or a
Java application to the event, see “Assigning
More Options” on page 71.
Editing Events
Assigning More Options
Editing Events
To assign more options before storing an event:
To change the details of an event:
1 If you have created a reminder for the event and
want to set the ring tone for that reminder:
1
2
3
4
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
2 If you want to assign a profile that your phone is
switched to while the event is occurring:
Select Profile.
Select the profile you want from the profiles
stored in your phone.
Your phone switches to this profile when the
event starts and switches back to the previous
profile when the event ends.
3 If you want to assign a Java application to start
when the event starts:
Select the day the event occurs.
Select the event.
Press A under Edit.
Follow the applicable instructions in “Creating
Events” on page 69 to edit the various fields.
To copy an event to another date:
1
2
3
4
5
6
7
8
Select App.
Select the event.
Press m.
Select Copy.
Press A under Yes to confirm.
Enter the date you want.
Press O.
If you want to change more information, follow
the applicable instructions in “Creating Events”
on page 69 to edit the various fields.
Select the application you want from the Java
applications stored in your phone.
Deleting Events
If you created a reminder for this event, your
phone prompts you to start the Java application
when you get the reminder.
1
2
3
4
Select the event.
Press m.
Select Delete.
71
Datebook
5 If the event is not a recurring event, press O or
press A under Yes to confirm. -orIf the event is a recurring event:
Select This Event Only to delete only the event
selected in step 2.
Select Repeat Event to delete all occurrences
of the event.
Receiving Reminders
If you created a reminder for a Datebook event,
when the reminder time occurs, your phone notifies
you with text on the display and a reminder tone.
To view more details about the event:
Open the flip. -orPress A under View.
To dismiss the reminder:
If the flip is closed, press .. -orIf the flip is open, press O, press A under
Dismiss, or close the flip.
Tip: You can set your phone to power on when
you receive a reminder. See “Customizing
Datebook Setup” on page 73.
72
For Events with Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
1 Press m.
2 Select Launch.
For Events with Numbers to Call
If you stored a phone number, LINC ID, or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from the reminder for that
event.
Making Calls from Reminders
You can make phone calls, InstantLINC Mobile to
Mobile calls and Group calls to numbers in
Datebook reminders.
To call a number from a reminder:
Press s.
To make InstantLINC Mobile to Mobile calls or
Group calls to a number from a reminder:
Press the PTT button.
Making Calls From Datebook
Making Calls From Datebook
Press and hold the PTT button on the side of
your phone. -or-
If you stored a phone number, LINC ID, or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from Datebook.
If you did not include a # before the Talkgroup
you want to call: Press m. Select Talkgroup.
you store numbers in both the Subject and
Location fields, you can call or send a call alert to
the number stored in Subject and the number
stored in Location as long as the number stored in
Subject is an InstantLINC Mobile to Mobile or
Talkgroup number and the number stored in
Location is a phone number.
If both are the same type of number, the number
stored in Subject is called or sent a call alert. To
call or send a call alert to the number stored in
Location, you must delete the number stored in
Subject.
To make a call or send a call alert:
1 Highlight or select the event containing the
number you want to call or send a call alert to.
2 To make a phone call:
Press s. -orPress m. Select Call # in Event.
To make an InstantLINC Mobile to Mobile call or
group call:
To send a call alert:
Press m. Select Alert # in Event.
Customizing Datebook Setup
To access Datebook set up options:
1 From the main menu, select Datebook.
2 Press m.
3 Select Setup.
You can view or change these options:
• Start View — sets Datebook to start in day view,
week view, or month view when you access
Datebook.
• Daily Begin — sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
• Reminders — If this option is set to Only When
On, your phone reminds you of events only
when it is on. If this option is set to Always, your
phone powers itself on when you receive
reminders. To avoid draining the battery, your
phone then powers itself off after a short time.
73
Datebook
• Delete After — sets the amount of time
Datebook waits to delete an event after it
occurs.
• Time Shift — lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
74
Java Applications
2 If you have selected a suite of applications,
select the application you want to run.
Your phone arrives with Java applications loaded
and ready to install. You can download and install
more Java applications.
To run an application that does not have a shortcut
on the main menu:
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
Installing Applications
1 From the main menu, select Java Apps.
2 Select the application or suite of applications
you want to install.
Installation messages appear as the application
installs.
3 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes. Press O.
Running Applications
To run an application that has a shortcut on the
main menu:
1 From the main menu, select the application or
suite of applications you want to run.
2 Select the application or suite of applications
you want to run.
3 If you have selected a suite of applications,
select the application you want to run.
Tip: If you don’t hear the sounds associated with
the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To suspend an application:
Press e or close the flip.
To view your suspended applications:
From the Java menu, select Suspended Apps.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
75
Java Applications
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
6 If you want to end all applications without letting
them exit, press A under EndNow.
Downloading Applications
1 From the Java menu, select Suspended Apps.
2 Select the application you want to resume.
If you want to run more Java applications, you can
download them into your phone.
Ending Applications
Go to http://www.southernlinc.com/downloads for a
selection of Java applications and downloading
instructions.
To end an application:
2 If the application you want to end is part of a
suite of applications, select the suite.
3 Scroll to the application you want to end.
Press A under End. -orIf End is not one of your options: Press m.
Select End.
Tip: You can also end applications from the
Suspended Apps screen.
To end all applications:
1
2
3
4
5
From the main menu, select Java Apps.
Scroll to Suspended Apps.
Press m.
Select End All.
Press O or press A under Yes to confirm.
76
Deleting Applications
To delete an application:
1
2
3
4
5
6
Scroll to the application you want to delete.
Press m.
Select Deinstall.
When your phone has finished deleting the
application, press A under Done.
To delete all Java applications:
1
2
3
4
Scroll to Java System.
Press m.
Select Delete All.
Managing Memory
Managing Memory
To view the amount of memory available for Java
applications:
1 From the main menu, select Java Apps > Java
System.
2 Press A under Next.
3 To see more memory information, press A
under Next again.
Deleting Java applications frees memory.
Note: Java application data is stored in your
phone using the same memory space
used to store messages, voice records,
pictures, ring tones, and wallpaper
items frees memory for Java applications.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
To create a shortcut to an application that is
already installed:
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press O.
To remove a shortcut:
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to remove the
shortcut for.
77
Java Applications
4 Press O.
Java Applications and GPS
Enabled
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 81 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects
your privacy by giving you the option to block all or
some Java applications from accessing the
location of your phone.
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
• Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
78
• Unrestricted — All Java applications may
access the location of your phone, without
notifying you.
• By Permission — When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
See “Setting Privacy Options” on page 86 for
information on choosing these options.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location
of your phone when the application requests
access for the first time. You may be required to
grant or deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application” on
page 79).
When a Java application requests access to the
location of your phone, a screen appears informing
you.
Java Applications and GPS Enabled
To deny this request:
1 Press A under Deny. The application does not
access the location of your phone.
2 Select the denying option you want:
• Always — If the application requests access
to the location of your phone again, the
request is denied without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
To grant this request:
1 Press A under Grant. The application
accesses your phone’s location.
2 Select the granting option you want:
• Always — If the application requests access
to the location of your phone again, the
request is granted without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is granted without notifying you.
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you
have the opportunity to set the GPS privacy option
for that Java application.
2 Scroll to the application or suite of applications
you want to set the privacy option for.
3 Press m.
4 Select Permissions.
5 Select the privacy option you want for this
application:
• Always — The application always has
permission to access the location of your
phone, without notifying you.
• Ask — When the application requests access
to the location of your phone, you are
prompted to grant or deny permission (see
“Granting or Denying Permission” on page
78).
79
Java Applications
• Never — When the application requests
access to the location of your phone, the
80
GPS Enabled
Your phone’s GPS Enabled feature uses
information from Global Positioning System (GPS)
satellites orbiting the Earth to determine the
approximate geographical location of your phone,
expressed as latitude and longitude. The
availability and accuracy of this location
information (and the amount of time that it takes to
calculate it) will vary depending on the environment
in which you are using the GPS feature. For
example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. SEE:
“IMPORTANT: Things to Keep in Mind”.
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your
emergency response center is equipped to process
such information.
You can also use the GPS feature to view your
approximate location. Location information
appears on the phone’s display.
Java applications loaded on your phone can also
request your location. If your phone is connected to
a laptop computer or similar device, software
running on that device can request your location.
To protect your privacy, you can control whether
these requests are granted.
IMPORTANT: Things to Keep
in Mind
If you are using the GPS feature of your phone
while driving, please give full attention to driving
and to the road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are
not limited to:
• In underground locations
• Inside of buildings, trains, or other covered
vehicles
• Under any other metal or concrete roof or
structure
• Between tall buildings or under dense
tree-cover
• Near a powerful radio or television tower
81
GPS Enabled
• When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
• In temperature extremes outside the
operating limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes
much further from your actual location. Advice
on how to improve GPS performance is
provided in “Enhancing GPS Performance” on
page 84.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
82
information and the time needed to obtain it will
vary depending on circumstances, particularly the
ability to receive signals from adequate numbers of
satellites.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information
becomes unavailable, it may reduce the speed and
accuracy of the location calculation.
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
Making an Emergency Call
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take
the GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
Viewing Your Approximate Location
GPS satellite signals and network assist data, it
may take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
In some cases, your local 911 emergency
response center may not be equipped to
receive GPS location information. For this
reason, and because the GPS location information
reported is only approximate or may not be
available in your location (see “IMPORTANT:
Things to Keep in Mind” on page 81), always
report your location to the 911 operator you
speak to when making an emergency call, if able,
just as you would when using a phone without GPS
capabilities.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
information, contact your local authorities.
In general, if your phone has access to signals
from more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is
automatically made available to the emergency
response center, if the center has the capability to
receive such information.
See “Enhancing GPS Performance” on page 84 for
information on how to help your phone determine
your location.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
This displays the following information about the
last time your location was calculated:
• The time (as Greenwich Mean Time) and date
that the location was last calculated
• The approximate location, expressed as latitude
and longitude
• The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
83
GPS Enabled
• The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
To calculate your location again:
Press A under Refresh.
It may take your phone several minutes to
complete the process of determining your location.
During this time, a message usually appears on
your phone’s display saying your phone is
scanning for satellites. For tips on getting the best
location calculation, see “Enhancing GPS
Performance”.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press A under Cancel to return to the Position
screen. -orPress e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored
in your phone and remains there even when your
phone is powered off. You will see this information
the next time you view the Position screen.
84
If you received a phone call or alert while
attempting to determine your location, the Position
screen will disappear, but your phone will continue
attempting to determine its location. If it is
successful, the new location information will be
displayed the next time you view the Position
screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if
the center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
Enhancing GPS Performance
To improve accuracy and increase your chances of
a successful calculation, do the following while
your phone is determining your approximate
location:
• Stay in the open. The GPS feature works best
where there is nothing between your phone and
a large amount of open sky. If possible, go
outside, away from tall buildings and foliage.
While performance in a building is improved by
moving closer to windows, glass with certain sun
shielding films may block satellite signals.
• Extend your phone antenna.
• Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is in your phone antenna. Hold
your phone away from your body, giving the
antenna clear access to satellite signals. Do not
cover the antenna area with your fingers or
anything else.
GPS antenna
85
GPS Enabled
• Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
• In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near a window.
Note: Although moving your phone at a walking
pace decreases GPS performance,
moving it at the speed of a moving car
does not.
• Stay in SouthernLINC Wireless coverage. The
SouthernLINC Wireless network will provide
your phone with information that helps
determine your location more quickly and
accurately.
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options.
86
Note: Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
2 If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the GPS PIN
Security Feature” for more information.)
3 Select the privacy option you want:
• Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All applications may view the
location of your phone, without notifying you.
• By Permission — When an application
attempts to view the location of your phone,
you will be prompted to give permission.
However, location information may still be
available to the phone’s owner, fleet manager,
or account administrator.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
Using GPS with Map Software
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If
you turn this feature on, you will be required to
enter a GPS PIN to access your GPS privacy
options.
To turn the GPS Enabled security feature on or off:
Security > GPS PIN.
2 Select On or Off.
3 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
4 Press A under Ok.
To change your GPS PIN:
Security > Change Password > GPS PIN.
2 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
3
4
5
6
7
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN.
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN to confirm.
Press A under Ok.
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone
to transmit data (see “Getting Started” on page 88).
Your phone then provides your approximate
location to the device running the map software,
which displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on
its map.
See “Enhancing GPS Performance” on page 84 for
more details on obtaining good location
information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
87
GPS Enabled
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
2 With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
The map software running on your laptop or other
device must support NMEA 3.0.
Getting Started
To connect your phone to your laptop or other
device:
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
connector
cover
88
•
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
• Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
89
Voice Records
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself or phone calls.
Your phone can store up to 20 voice records.
Creating Voice Records
To record a note to yourself:
1 From the main menu, select VoiceRecord >
[New VoiceRec].
2 Say the message you want to record into the
microphone.
Tip: To stop recording before you are finished,
press A under Pause. To start recording
again, press A under Resume. To stop
recording and discard the voice record at
any time, press A under Cancel.
3 When you are finished recording, press O.
To add to the end of voice record:
1
2
3
4
5
From the main menu, select VoiceRecord.
Scroll to the voice record you want to add to.
Press m.
Select Add To.
When you are finished recording, press O.
90
To record a phone call:
1 While on an active call, press m.
2 Select Record.
3 When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Playing Voice Records
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to play.
3 To stop the voice record while it is playing, press
O.
Tip: To fast forward, scroll right. To rewind, scroll
left. To pause or resume, press any number
key.
Labeling Voice Records
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
1
2
3
4
Scroll to the voice record you want to label.
Press A under Label.
Enter the label you want to assign.
Deleting Voice Records
5 Press O.
Deleting Voice Records
To delete a voice record:
2 Scroll to the unlocked voice record you want to
delete.
3 Press m.
4 Select Delete.
5 Press O or A under Yes to confirm.
To delete all voice records:
1
2
3
4
5
Scroll to any voice record.
Press m.
Select Delete All.
Press O or A under Yes to confirm.
Locking Voice Records
When you lock a voice record, it cannot be deleted
until you unlock it.
2 Scroll to the voice record you want to lock or
unlock.
3 Press m.
4 Select Lock to lock the message. -orSelect Unlock to unlock the message.
When a voice record is locked, this icon R appears
next to it.
Managing Memory
To view the amount of memory available for voice
records:
2 With [New VoiceRec] highlighted, press A
under Memory. -orWith any voice record highlighted, press m.
Select Memory.
To free more memory by deleting all unlocked
voice records:
1 From the voice records memory screen, press
A under Delete.
2 Press O or A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store messages, Java application data,
pictures, ring tones, and wallpaper
items frees memory for voice records.
91
Customizing Your Phone
Setting the Volume
Of the Earpiece and Speaker
1 From the main menu, select Settings > Volume.
2 Scroll to Earpiece to set the earpiece volume.
-orScroll to Speaker to set the speaker volume.
3 To set the volume:
Scroll left or right. -orPress the volume controls.
Of the Ringer
Press the volume controls.
Setting Your Phone to Vibrate
sound when you receive phone calls, InstantLINC
Mobile to Mobile calls, group calls, message
notifications, and call alerts, see “Setting Your
Phone to Vibrate” on page 49.
92
sound when you receive InstantLINC Mobile to
Mobile calls, and group calls, even if you want your
phone to ring for other features:
InstantLINC > Alert Type.
Tip: If Alert Type does not appear: From the
main menu, select Ring Tones. Make sure
VibeAll is set to Off. Repeat step 1.
2 Select Vibrate to set your phone to vibrate.
Tip: Select Silent in step 2 to set your phone to
neither vibrate nor make a sound.
Changing the Look of Your
Phone
Wallpaper
A wallpaper is an image that appears on the idle
screen.
Choosing a Wallpaper
Display/Info > Wallpaper > Wallpaper.
2 Select the wallpaper you want.
Tip: If you want to see what the wallpaper looks
like, press A under View.
Changing the Look of Your Phone
Setting Wallpaper to Change Automatically
To set your phone to briefly display very large
digits when you enter numbers at the idle screen:
Display/Info > Wallpaper > Auto Cycle.
2 Select how often you want the wallpaper to
change.
Display/Info > Large Dialing.
2 Set this option to Large Digits.
Any of the wallpapers in your phone may appear
on your idle screen.
Setting Contrast
Deleting a Wallpaper
To set the contrast of the display:
Display/Info > Wallpaper > Wallpaper.
2 Select the wallpaper you want to delete.
3 Press m.
4 Select Delete.
5 Press O.
6 Press A under Yes.
Display/Info > Contrast.
2 To set the contrast of the internal display, select
Int. Display. -or-
Setting Text Size
To set the size of the text on the internal display:
Display/Info > Text Size.
2 Select the option you want:
• Zoom — 11 characters per line
• Standard — 14 characters per line
• Compressed — 18 characters per line
To set the contrast of the external display, select
Ext. Display.
3 Scroll left or right to set the contrast.
Setting the Menu View
You can set the items on your main menu and Java
applications menu to appear as large icons or a
list:
Display/Info > Menu View. -orFrom the main menu: Press m. Select Main
Menu Setup > Menu View.
2 To choose a list, select List View. -or93
To choose large icons, select Icon View.
Setting the Backlight
A backlight lights the display and keypad when you
make or receive a call, open or close the flip, or
press keys or buttons.
To control how long the backlight stays on:
Display/Info > Backlight > Backlight.
2 Select the number of seconds you want the
backlight to stay on. -orSelect Off if you never want the backlight on.
To set your phone so that it cannot make or receive
phone calls, InstantLINC Mobile to Mobile calls, or
group calls; or transfer data:
Advanced > Airplane Mode.
Note: Pressing p for more than 5 seconds also
turns on Airplane mode.
This icon U appears.
To restore your phone’s ability to do all these
things:
Set this option to Off.
To set the keypad backlight to light up only in low
light conditions:
Using Settings
Display/Info > Backlight > Sensor.
Settings contains many submenus that let you
customize your phone.
Airplane Mode — Temporarily
Turning Off Calls
Sometimes you may want to have your phone on,
but turn off its ability to make and receive calls,
such as when you are on an airplane.
94
For information on applying groups of settings to
your phone together, see “Profiles” on page 99.
Using Settings
Display/Info Features
Phone Calls Features
The Display/Info menu controls how the keypad
and display appear:
The Phone Calls menu controls how your phone
handles phone calls:
• Wallpaper — changes the wallpaper that
appears on the idle screen.
• Palette — changes the color scheme of the
display.
• Text Size — sets size of text on the display.
• Home Icons — controls whether main menu
icons appear on the idle screen.
• Backlight — controls backlight illumination.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
• Menu View — controls whether the items on
your main menu and Java applications menu
appear as large icons or a list.
• Large Dialing — sets large digits to appear on
the idle screen when you enter a number.
• Contrast — sets the contrast of the display.
• Language — sets the language that your phone
displays.
• Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
• Any Key Ans — If this feature is on, you can
answer calls by pressing any key on the keypad.
• Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
• Call Waiting — See “Call Waiting” on page 38.
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified
number of rings. When this feature is on, the
phone answers by connecting you to the caller;
it does not send the call to voice mail, unless
you are out of coverage or on the line.
• Flip Activation — See “Setting Flip Actions” on
page 41.
• Minute Beep — causes a beep to sound every
minute of an active call.
• Call Duration — causes the duration of a call to
appear on the display when the call ends.
• TTY — See “Making TTY Calls” on page 43.
• Notifications — See “Message Notifications” on
page 55.
95
• Java App Control — If you have installed a
Java application that answers phone calls, this
setting lets you turn that application on.
Features
The InstantLINC Mobile to Mobile menu controls
how your phone handles InstantLINC Mobile to
Mobile calls and group calls:
• Tkgrp Silent — controls whether you hear
group calls to your Talkgroup. See “Turning off
Group Calls” on page 46.
• Tkgrp Area — lets you define your Talkgroup
area.
• One Touch PTT — See “Setting One Touch
PTT” on page 40.
• Alert Type — controls how your phone notifies
you when you receive InstantLINC Mobile to
Mobile calls, and group calls.
96
Personalize Features
The Personalize menu makes main menu items
easier to access.
• Menu Options — Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps lets you create a shortcut to a Java
application on the main menu.
• Up Key — sets the main menu item you access
when you scroll up from the idle screen.
• Down Key — sets the main menu item you
access when you scroll down from the idle
screen.
• Left Key — sets the main menu item you access
when you scroll left from the idle screen.
• Right Key — sets the main menu item you
access when you scroll right from the idle
screen.
• Center Key — sets the main menu item you
access when you press O from the idle screen.
• Left Sftkey — sets the main menu item you
access when you press the left option key from
the idle screen.
• Right Sftkey — sets the main menu item you
access when you press the right option key from
the idle screen.
Using Settings
• Power Up — sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
• Line 1 — sets ringer volume for phone line 1.
• Line 2 — sets ringer volume for phone line 2.
• Messages — sets the volume of message
notifications and Datebook reminders.
• Earpiece — sets the volume of sound coming
out of the earpiece.
• Speaker — sets the volume of sound coming
out of the speaker.
• Keypad — sets the volume of sound associated
with pressing keys and buttons.
• Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
• Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speaker.
• Data — sets the volume of sounds that notify
you that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features
on and off and change passwords:
• Phone Lock — turns on a feature that locks
your phone: Lock Now takes effect immediately;
Auto Lock takes effect when your phone is
powered off and then on. An unlock code is
required to enable this feature, to unlock the
phone, and to set a new unlock code. Contact
SouthernLINC Wireless for your default unlock
code.
• Keypad Lock — locks the phone’s keypad,
either immediately or automatically after a set
period of inactivity.
• SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 13.
• GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 86.
• Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
97
Advanced Features
The Advanced menu contains advanced and rarely
used Settings features.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
message notification, call alert, or Datebook
reminder.
• Headset/Spkr — sets headset option. See
“Using a Headset” on page 105.
• Disco Lights — sets the lights in the external
display to light up when a musical ring tone
sounds.
Note: Some musical ring tones you download to
your phone may not activate disco lights.
• Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of SouthernLINC Wireless; Master
Reset lets SouthernLINC Wireless reset your
service in the event of a security or provisioning
problem.
• Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of SouthernLINC Wireless.
• Return to Home — controls how long the recent
calls list displays after calls.
98
• Airplane Mode — prevents your phone from
making or receiving phone calls, InstantLINC
Mobile to Mobile calls, group calls, or
transferring data.
• Phone Only — prevents your phone from
making or receiving InstantLINC Mobile to
Mobile calls, or group calls; or transferring data.
• Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer,
PC, or similar device.
Profiles
Viewing Profiles
A profile is a group of settings saved together so
that you can apply them to your phone easily.
To view the profiles stored in your phone:
A profile contains these settings:
• Ring Tones — sets all options described in
“Ring Tones” on page 49, except assigning ring
tones to Contacts.
• Display/Info — sets Wallpaper, Color Palette,
Text Size, and Backlight options. See
“Display/Info Features” on page 95.
• Phone Calls — sets Set Line and Auto Ans
options. See “Phone Calls Features” on page
95.
• Volume — sets all options described in “Volume
Features” on page 97.
• Call Filter — controls which calls, call alerts,
and message notifications your phone responds
to. See “Setting Call Filtering” on page 102.
• Advanced — sets headset option. See “Using a
Headset” on page 105.
Your phone arrives with pre-set profiles. You can
also create your own profiles.
1 From the main menu, select Profiles.
2 Scroll to the profile you want to view.
Tip: The profile that is currently in effect on your
phone has a checkmark next to it.
3 Press A under View.
4 Scroll to view settings.
Switching Profiles
To apply a profile to your phone:
2 Scroll to the profile you want to apply.
3 Press O.
The profile you selected is now in effect.
How Changing Settings
Affects Profiles
Many of the settings contained in profiles can be
set without switching or editing profiles — for
example, by selecting Settings or Ring Tones to
set options, or by setting the volume of the phone’s
ring using the volume controls.
99
Profiles
When you do this, your phone either:
• Updates the profile in effect to reflect these
changes, without notifying you -or• Creates a temporary profile that contains these
changes
To set your phone to create a temporary profile
that contains changes you make to settings:
1
2
3
4
From the main menu, select Profiles.
Press m.
Select Setup > Temp Profile.
Set this option to On.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp Profile to Off in step 4.
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
100
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on
have an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
1
2
3
4
5
Scroll to the temporary profile.
Press m.
Select Store As New.
Enter the name you want to give the profile.
To overwrite the profile the temporary profile is
based on:
2 Scroll to the temporary profile.
3 Press m.
Creating Profiles
4 Select Store Changes.
The temporary profile is stored with the name of
the profile it is based on. The profile it is based on,
as it existed before you made changes to settings,
is gone.
Creating Profiles
2 Select [New Profile]. -orScroll to any profile. Press m. Select New.
3 Enter the name you want to give the profile.
4 If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
want to base this profile on. If you do not choose
a profile to copy from, the new profile is based
on a default profile.
5 Press A under Create.
6 Scroll through the list of options and set their
values.
3 Press m.
4 Select Edit.
5 Scroll through the list of options and set their
values.
Deleting Profiles
To delete a profile:
2 Select the profile you want to delete.
Note: A temporary profile is automatically
deleted when the profile it is based on is
deleted.
3 Press m.
4 Select Delete.
To delete all profiles:
1
2
3
4
Press m.
Select Delete All.
Editing Profiles
2 Scroll to the profile you want to edit.
101
Profiles
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which
it ignores.
To set call filtering:
1 While setting options for a profile, select Call
Filter.
2 To set filtering options for phone calls, select
Phone.
• Off sets your phone to notify you of all phone
calls.
• All sets your phone to ignore all phone calls.
• All Contacts sets your phone to notify you
only of phone calls from numbers stored in
Contacts.
• Some Cntcs sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
3 If you set the Phone option to Some Cntcs,
select up to 5 Contacts entries that contain
phone numbers you want to be notified of calls
from.
When you are finished, press A under Done.
4 To set filtering options for InstantLINC Mobile to
Mobile calls and group calls, select Prvt/Grp.
102
• Off sets your phone to notify you of all
InstantLINC Mobile to Mobile calls and group
calls.
• On sets your phone to ignore all InstantLINC
Mobile to Mobile calls and group calls.
5 To set filtering options for call alerts, select
Alerts.
• Off sets your phone to notify you of all call
alerts.
• On sets your phone to ignore all call alerts.
6 To set filtering options for message notifications,
select Notifications.
• Off sets your phone to notify you of all
messages.
• Voice Messages sets your phone not to
sound a tone or vibrate when you receive
voice messages.
• Text Messages sets your phone not to sound
a tone or vibrate when you receive text
messages.
• All sets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate,
the message notification screen appears
as usual.
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad (1 through 9) or
saying the voice name of the shortcut. You create
the shortcut and then use it to take you to that
screen any time.
Creating a Shortcut
Note: When you receive your phone, all number
keys may already be assigned to
shortcuts. If this is the case, you can
create new shortcuts by deleting or
replacing existing shortcuts.
1 Go to the menu item you want to create a
shortcut for.
For example, if you want to create a shortcut to
the screen for creating a new Contacts entry:
From the main menu, select Contacts, then
highlight [New Contact].
2 Press and hold m until a confirmation screen
appears.
3 Press O or press A under Yes.
4 Select Key.
5 Press the number key you want to assign to the
shortcut.
6 Press O.
7 If you want to record a voice name for the
shortcut: Select Voice. As directed by the
screen prompts, say and repeat the name you
want to assign to the number. Speak clearly into
the microphone.
9 If the number key you chose is already assigned
to a shortcut, a prompt appears asking if you
want to replace the existing shortcut.
Press A under Yes to replace the existing
shortcut. -orPress A under No if you want to keep the
existing shortcut and assign another number key
to the shortcut.
Using a Shortcut
If you know the shortcut number:
1 From the idle screen, press m.
2 On your keypad, press the number assigned to
the shortcut.
If you do not know the shortcut number:
1 From the main menu, select Shortcuts.
2 Scroll to the shortcut you want to use. -or-
103
Shortcuts
If you assigned a voice name to the shortcut:
Press and hold t . Say the voice name into
your phone. The shortcut with that voice name is
then highlighted.
3 Press O.
Editing a Shortcut
To change the number assigned to a shortcut:
1
2
3
4
5
6
From the main menu, select Shortcuts.
With any shortcut highlighted, press m.
Select Reorder.
Scroll to the shortcut you want to move.
Press A under Grab.
Scroll to the place where you want the shortcut
to appear.
7 Press A under Insert.
8 Repeat step 4 through step 7 for all the items
you want to move.
To change the number or voice name assigned to
a shortcut:
1 From the main menu, select Shortcuts.
2 Highlight any shortcut.
3 Press A under Edit.
104
4 With Key or Voice highlighted, press O to
change assignments.
Deleting Shortcuts
To delete a shortcut:
1
2
3
4
5
Scroll to the shortcut you want to delete.
Press m.
Select Delete.
To delete all shortcuts:
1
2
3
4
With any shortcut highlighted, press m.
Select Delete All.
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -orSelect Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Attaching a Headset
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
Hold the remote PTT button for less than 2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
Note: For InstantLINC Mobile to Mobile calls,
use the remote PTT button as you would
the PTT button on your phone.When
using a headset, the PTT button on your
phone works the same way as when you
are not using a headset. Sounds
associated with InstantLINC Mobile to
Mobile calls and group calls are heard
through the headset.
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
Using a Remote PTT Button
If you are using a headset or other accessory with
a remote PTT button, you can use the remote PTT
button for phone calls and InstantLINC Mobile to
Mobile calls.
105
Understanding Status
Messages
You may receive status messages under certain
conditions. Before contacting SouthernLINC
Wireless Customer Care, note the message,
numeric code, and the conditions under which it
appeared. The following table lists and describes
status messages.
Note: When your flip is closed, the internal
display screen shows a shortened version
of the status message displayed in the
external screen. To see complete status
messages, open the flip.
Status
Messages
(external
display)
Status
Messages
(internal
display)
Number Not
in Service
Number Not in The number that you
entered is not valid.
Service
Not Avail.
User Not
Available
106
Message
Description
The phone that you
called is either busy, out
of coverage, or turned
off. Please try again
later.
Status
Messages
(external
display)
Status
Messages
(internal
display)
Message
Description
Not Avail.
User Not
Authorized
The person that you
called has not
purchased this service.
Failed
Please Try
Later
This service is
temporarily not
available. Please try
again later.
Restricted
Service
Restricted
This service was
restricted by
SouthernLINC Wireless,
or this service was not
purchased.
Not Avail.
Service Not
Available
You are either out of
coverage or having
problems with
provisioning.
System Busy System Busy
The system is
experiencing heavy
traffic. Please try again
later.
Failed
This service cannot be
enabled because an
incompatible service
has already been turned
on.
Service
Conflict
Status
Messages
(external
display)
Status
Messages
(internal
display)
Message
Description
Status
Messages
(external
display)
Try Again
Please Try
Again
An error occurred.
Please try again.
Wrong PIN
You have entered an
incorrect PIN number.
PIN Blocked PIN Blocked
Call Your
Provider
Please Enter
Special Code
You have inserted a SIM
card that will not work
with a SouthernLINC
Wireless phone. Contact
Customer Care if you
believe this is a valid
SIM card.
The incorrect PIN was
entered 3 consecutive
times. You will be unable
to place or receive calls
on your phone. Contact
Customer Care to have
them obtain the PIN
Unblocking Key (PUK)
code.
Insert SIM
Insert SIM
Your SIM card is not
being detected. Please
check to ensure that you
have inserted the SIM
card correctly into your
phone.
Enter PIN
Enter SIM PIN
Please enter your 4- to
8- digit SIM PIN code.
Unit Lock
Enter Unlock
Code
Auto Phone Lock is
activated. Enter your
unlock code.
Self Check
Self Check
Self Check
Error +
Number Code
A fault was detected
with your phone. If this
error recurs, note the
error code and contact
Customer Care.
Self Check Fail
+ Number
Code
An operational fault was
detected with your
phone. Note the numeric
code, turn your phone
off, and contact
Customer Care.
Status
Messages
(internal
display)
Low Memory New Browser
Message
Memory Full!
Message
Description
Warns of low memory
for Net Alerts.
107
Understanding Status Messages
Status
Messages
(external
display)
Status
Messages
(internal
display)
Message
Description
Scanning for
Satellites
Searching for GPS
satellites.
Unable to
Locate Sats
Could not find GPS
satellites.
Technical Error A problem occurred in
your phone’s GPS
circuitry. If this error
occurs, contact
Customer Care.
108
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
RF Operational
Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used
to sustain connection to the wireless network, and
a receiver which enables you to receive
communication and connection information from
the network.
Portable Radio Product
Operation and EME Exposure
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
• United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
• American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
• Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
• ANATEL, Brasil Regulatory Authority, Resolution
303 (July 2, 2002) "Regulation of the limitation of
exposure to electrical, magnetic, and
electromagnetic fields in the radio frequency
range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2,
2002."
109
Safety and General Information
To assure optimal radio product performance
and make sure human exposure to radio
frequency electromagnetic energy is within the
guidelines set forth in the above standards,
always adhere to the following procedures:
Phone Operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
Two-way radio operation
Your radio product has been designed and tested
to comply with national and international standards
and guidelines regarding human exposure to RF
electromagnetic energy, when operated in the
two-way mode (at the face, or at the abdomen
when using an audio accessory) at usage factors
of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50%
of the time. To transmit (talk), push the
Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the
time or less, is important because this radio
generates measurable RF energy only when
transmitting (in terms of measuring for standards
compliance).
110
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the
lips.
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your
body when transmitting, always place the radio
product in a Motorola approved clip, holder,
holster, case or body harness for this product.
Use of non-Motorola-approved accessories may
exceed FCC RF exposure guidelines. If you do
not use a Motorola approved body-worn
accessory and are not using the radio product
in the intended use positions along side the
head in the phone mode or in front of the face
in the two-way radio mode, then ensure the
antenna and the radio product are kept the
following minimum distances from the body
when transmitting
• Phone or Two-way radio mode: one inch (2.5
cm)
• Data operation using any data feature with or
without an accessory cable: one inch (2.5
cm)
Portable Radio Product Operation and EME Exposure
ALL MODELS WITH FCC ID AZ489FT5828 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.1 Tests for SAR are conducted using standard
operating positions reviewed by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.41 W/kg and when tested on the body, as
described in this user guide, is 1.45 W/kg during packet
data transmission. (Body-worn measurements differ
among phone models, depending upon available
accessories and FCC requirements.)2
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5828.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
2 The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
1
111
Antenna Care
Facilities
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
DO NOT hold the antenna when the radio
product is “IN USE”. Holding the antenna affects
call quality and may cause the radio product to
operate at a higher power level than needed.
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.motorola.com/iden.
Electromagnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Aircraft
When instructed to do so, turn off your radio
product when on board an aircraft. Any use of a
radio product must be in accordance with
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum
separation of 6 inches (15 cm) be maintained
between a handheld wireless radio product and a
pacemaker. These recommendations are
consistent with those of the U.S. Food and Drug
Administration.
Persons with pacemakers should:
• ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
112
Operational Warnings
• Not carry the radio product in a breast pocket.
• Use the ear opposite the pacemaker to minimize
the potential for interference.
• Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
• Pull off the road and park before making or
answering a call if driving conditions so require.
Operational Warnings
For Vehicles with an Air
Bag
!
Do not place a portable radio product in the area
over the air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air
bag inflates, the radio product may be propelled
with great force and cause serious injury to
occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any
area with a potentially explosive atmosphere,
unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved).
Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
When using the radio product while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
113
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such
as grain, dust or metal powders, and
any other area where you would
normally be advised to turn off your
vehicle engine. Areas with potentially
explosive atmospheres are often but
not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio product when you
are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
Operational Cautions
Batteries
!
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
114
charged battery, particularly when placing it inside
a pocket, purse, or other container with metal
objects. To reduce the risk of injury, batteries
should not be exposed to fire, disassembled, or
crushed.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your radio product interior gets wet, then do not
try to accelerate drying with the use of an oven or a
dryer as this will damage the radio product and
void the warranty. Instead, do the following:
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
from radio product.
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5 Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
Accessory Safety Information
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
Clean the external surfaces of the radio product
with a damp cloth, using a mild solution of
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Accessory Safety Information
Important: Save these accessory safety
instructions.
• Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
• Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
!
Warning: To reduce the risk of injury,
charge only the rechargeable
batteries described in “Battery” on
page 4. Other types of batteries may
burst, causing personal injury and
damage.
• To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
• Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
• Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
• Use of a non-recommended attachment to a
battery charger may result in a risk of fire,
electric shock, or injury to persons.
• Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
115
• An extension cord should not be used with any
battery charger unless absolutely necessary.
Use of an improper extension cord could result
in a risk of fire and electric shock. If an extension
cord must be used, make sure that:
• The pins on the plug of the extension cord are
the same number, size, and shape as those
on the plug of the charger.
• The extension cord is properly wired and in
good electrical condition.
• The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
• Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
• Do not disassemble a battery charger; take it
to a qualified service technician when service
or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
• Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
• The output power from the power supply or
transformer must not exceed the rating given
on the Desktop Dual-Pocket Charger.
116
• The disconnection from the line voltage is
made by unplugging the power supply from
the AC receptacle.
• To reduce risk of electric shock, unplug any
battery charger from the outlet before
attempting any maintenance or cleaning.
For optimum charging performance, turn off the
radio product while charging it in any battery
charger.
MOTOROLA LIMITED
WARRANTY
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
PRODUCTS
COVERED
LENGTH OF
COVERAGE
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Accessories as
defined above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
What Does this Warranty Cover?
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these
Products ("Software") to be free from defects in
materials and workmanship under normal
consumer usage for the period(s) outlined below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new
Products, Accessories and Software
purchased by consumers in the United States
or Canada, which are accompanied by this
written warranty:
Products or
The balance of the
Accessories that are original warranty or
Repaired or Replaced. for ninety (90) days
from the date returned
to the consumer,
whichever is longer.
Software as defined
Ninety (90) days from
above. Applies only to the date of purchase.
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or
floppy disk).
117
MOTOROLA LIMITED WARRANTY
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Ornamental Decorations. Ornamental
decorations such as emblems, graphics,
rhinestones, jewels, gemstones and their settings,
and other decorative elements, are excluded from
coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
118
Use of Non-Motorola Products and
Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified
Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects
or damages resulting from service, testing,
adjustment, installation, maintenance, alteration,
including without limitation, software changes, or
modification in any way by someone other than
Motorola, or its authorized service centers, are
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software
due to any communication service or signal you
may subscribe to or use with the Products,
Accessories or Software is excluded from
coverage.
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the
internet), is provided "as is" and without warranty.
Or visit us online at
http://www.motorola.com/iden/support
Who is covered? This warranty extends only to
the first consumer purchaser, and is not
transferable.
What will Motorola Do? Motorola, at its option,
will at no charge repair, replace or refund the
purchase price of any Products, Accessories or
Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software
or applications added to your Product, Accessory
or Software, including but not limited to personal
contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software
and applications please create a back up prior to
requesting service.
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
You will receive instructions on how to ship the
Products, Accessories or Software, at your
expense, to a Motorola Authorized Repair Center.
To obtain service, you must include: (a) a copy of
your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the
problem; (c) the name of your service provider, if
applicable; (d) the name and location of the
installation facility (if applicable) and, most
importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS
119
MOTOROLA LIMITED WARRANTY
THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL MOTOROLA BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, ACCESSORY OR SOFTWARE, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
120
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies
of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with,
the Products associated with such Motorola
software. No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
Limited Warranty
Motorola
Communication
Products (International)
Note: This Warranty applies in Singapore and
the Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products
listed below (“Product”) against defects in material
and workmanship under normal use and service
for a period of time from the date of purchase as
scheduled below:
iDEN Subscriber Digital Mobile and One (1) Year
Portable Units
Product Accessories
One (1) Year
(manufactured by or under license
from MOTOROLA)
Batteries
One (1) Year
Rechargeable Batteries will be replaced during the
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for
additions or modifications to this warranty unless
made in writing and signed by an officer of
MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the original
end user purchaser, MOTOROLA does not warrant
the installation, maintenance or service of the
Product.
121
Limited Warranty Motorola Communication Products (International)
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
equipment if expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole, or any portion of the system not
produced by MOTOROLA, under this warranty.
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
II. General Provisions:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be provided
by MOTOROLA through one of its authorized
warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer
or communication service provider), it can facilitate
your obtaining warranty service.
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the
Product, Repair, replacement or refund of the
purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
122
III. How to Get Warranty
Service:
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
b. Defects or damage from misuse, accident,
water, or neglect.
c. Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
d. Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
e. A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
f. Product which has had the serial number
removed or made illegible.
g. Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by
charging or using the battery in equipment
or service other than the Product for which it
is specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized
alteration of the software/firmware in the
Product, does not function in accordance with
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
j. Scratches or other cosmetic damage to
Product surfaces that does not effect the
operation of the Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from
use of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or
parts infringe a patent, and Motorola will pay those
costs and damages finally awarded against the
end user purchaser in any such suit which are
attributable to any such claim, but such defense
and payments are conditioned on the following:
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
123
Limited Warranty Motorola Communication Products (International)
settlement or compromise; and
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at
its option and expense, either to procure for
such purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In
no event shall MOTOROLA be liable for any
incidental, special or consequential damages
arising from any claim of patent infringement or
alleged infringement.
124
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product may
not be replaced, copied, distributed, modified in
any way, or used to produce any derivative thereof.
No other use including, without limitation,
alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA
software or exercise or rights in such MOTOROLA
software is permitted. No license is granted by
implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
Patent and Trademark
Information
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. &
Tm. Off. © 2005 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic
Communications.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Java and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Software Copyright Notice
The Motorola products described in this manual
may include copyrighted Motorola and third party
software stored in semiconductor memories or
other media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola
products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software
provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation
of law in the sale of a product.
All other product names or services mentioned in
this manual are the property of their respective
trademark owners.
125
Index
Numerics
3-way calling 39
A
Accessories 16
safety 115
Airplane mode
power button 7
status icon 11
turning on and off 94
Alpha mode 52
Antenna 15
B
Backlight 94, 95
Battery
care 6
charging 5, 6
door 3
inserting 4
safety 114
Baud rate 98
126
C
Call alerts 23
deleting 24
queue 23
receiving 23
responding 23, 24
sending 23
sorting 24
viewing 24
Call filtering 102
Call forwarding 36
all calls 36
missed calls 37
off 36
Call Timers 41
Call Waiting 38
off 38
Calls
3-way 39
answering automatically 95
answering with any key 18,
95
emergency 22
ending 18
entering number 18
from Contacts 19
from Datebook 20
from memo 48
from Recent calls 19
from recent calls 28
group, see Group calls
calls 17, 21, 96
making 17
on hold 39
phone calls 17
receiving 18
redialing 20, 95
remote PTT 105
Speed Dial 20
TTY, see TTY calls
Turbo Dial 20
voice name 20
Circuit data 43
Clock 95
Contact information
LINC View 65
receiving 26, 66
sending 65
Contacts 19, 30
capacity 34
creating entries 32
deleting 34
icons 30
iDEN Phonebook Manager
35
international numbers 35
searching 31
showing all entries 31
showing only LINC IDs 31
SIM card 30
storing from idle screen 33
storing from Memo 48
storing from recent calls 27
type 30
viewing 31
voice name 33
with non-i836 phones 35
D
Datebook 20
profiles 71
Display
backlight 94, 95
contrast 93, 95
options 9
screen 9
Drafts 61
see also text messages,
drafts
viewing location 83
GPS PIN 97
GPS, see GPS Enabled
Group calls 46, 96
making 46
off 46
receiving 46
E
H
Email 30, 32, 43
Emergency calls 22
End key 2
Handset, see phone
Headset 105
F
Faxes
receiving 43
sending 43
Flip action 17, 18, 41
G
GPS Enabled 81
best results 84
emergency calls 22, 82
map software 87
privacy options 86
security 86
I
Icons
Contacts 30
status 11
text entry 52
iDEN Phonebook Manager 35
Idle screen 9
creating text messages 60
storing to Contacts 33
InstantLINC Mobile to Mobile 17,
21, 96
International numbers
storing 35
127
Index
J
Java applications
deleting 76
memory 77, 91
K
Keypad 2
locking 97
L
Language 95
LINC View 65
LINC View Contact 65
LINC View My Info 65
Lists, see menus
M
Memo 48
calling from 48
creating 48
editing 48
viewing 48
Memory
Java applications 77, 91
ring tones 51
128
text messages 62
voice records 91
Menu key 2, 10
Menus 9
context-sensitive 2, 10
main menu 10
Message center 55, 57
see also messages
text messages 59
Message notifications 55
setting options 55
Messages 55
see also voice mail and text
messages
receiving 55
Mute 21
My Info 63
editing 63
LINC View 65
receiving 25, 66
sending 64, 65
viewing 63
N
Navigation key 2
Numeric mode 54
O
Over-the-air programming 8
P
Packet data 43
Passwords 97
Patent information 125
Pauses
dialing 40
storing 34
Phone 1, 9
active line 95
flip action 17, 18, 41
locking 97
modem 42
off 7
on 7
only 98
setting up 2
Profiles 99
call filtering 102
changing settings 99
creating 101
Datebook 71
deleting 101
editing 101
switching 99
temporary 100
viewing 99
Programming, over-the-air 8
PTT
One Touch 21
One Touch, setting 40
PUK code 13
Q
Quick notes 60
see also text messages,
Quick notes
R
Radio frequency 109
Recent calls 19, 25, 28
call alerts 25
contact information 26
creating text messages 60
deleting 27
display time 98
viewing 26
Redialing 20, 95
Ring tones 30, 49
deleting 51
downloading 51
memory 51
off 49
setting 49
setting in Contacts 32, 50
vibrate 49
viewing assigned 50
Ringer 92
see also Ring tones
off 92
S
Safety 109
accessory 115
battery 114
electromagnetic interference
112
medical devices 112
radio frequency 109
Security 97
Service, activating 7
Settings 94
resetting 98
Shortcuts
creating 103
deleting 104
editing 104
using 103
SIM card 3, 12, 14
Contacts 30
inserting 14
with non-i836 phones 35
SIM PIN 12, 97
changing 12
default 12
entering 12
requirement 13
unblocking 13
Speakerphone 21
Speed Dial 20, 31, 33
Status messages 106
Symbols mode 54
T
T9 Text Input, see text entry
Talkgroups 46, 96
129
Index
joining 46
Text display area 9
Text entry 52
Alpha mode 52
database 52, 53
icons 52
mode 52
Numeric mode 54
Symbols mode 54
Word mode 52
Text messages 55, 58
creating 59
deleting 61, 62
drafts 61
memory 62
message center 59
receiving 58
sending 59
sent messages 61
setting up 58
sorting 62
text messages
quick notes 60
Trademark information 125
130
TTY calls 43
baud rate 44
making 43
mode 44
on 44
Turbo Dial 20
V
Voice mail 55, 57
receiving 57
sending calls to 18, 57
setting up 37, 57
Voice name 20, 31
creating 33
Voice records 90
creating 90
deleting 91
labelling 90
locking 91
memory 91
playing 90
Volume, setting 92, 97
W
Waits
dialing 40
storing 34
Warranty 121
Word mode 52

i836 - SouthernLINC Wireless

Transcription

Similar documents

July, 1993 - Stumpf Welding Supplies

Setting an Android Device to AutoFill Password Fields in

brightsign xd smart menu board

Published in Western Horseman - July, 2001

Customize Your Profile - Division of Student Affairs

Happy Hour Menu - Toulouse Petit

View our Events Brochure

Tektronix TDS 210 Quick Start

Target Red Card - Dublin City Schools

TALLULA PRIVATE EVENTS | FREQUENTLY ASKED QUESTIONS