Line SpecSheet - Inter-Lux

Line Specifications
Send
Ordering Information1
FX LI
24
Model
IP
Length
Power
Color
Optics
Voltage
Options
FX LI
20
67
13 to 80 OAL
(IP20)
H
30
35
40
120°
45°
24
L
30
35
40
B
RGB
BF
C10
C20
AC
2
3
Specify remote power supply separately below. 2See page 2 for available lengths and order codes.
H recommended for higher ambient light environs.
1
Surface mounted linear LED with high
performance optics for outdoor and indoor
use. Wall or ceiling installation.
IP20 / IP67
Cover
3
0.8”
(21mm)
Installation
clips
Luminaire
Power3
n
Continuous run of standard lengths
n
H = 7.5W/ft, 3000K, 550 lm/ft
n
High performance optics
n
L = 3W/ft, 3000K, 210 lm/ft
n
UL STD 1598
n
n
Remote power supply
L = 4.5W/ft RGB:
R29 lm/ft, G65 lm/ft, B15 lm/ft
n
Extruded aluminum body, anodized
n
Protective PMMA cover, or cover with
selected optics
n
Installation clips
n
Cross section 0.8’’ (W) x 0.5’’ (H) or
0.8’’ (W) x 0.6’’ (H)
n
0.5”
(13mm)
Supplied with oil and water resistant
3’ feed cable standard, single color
18/2 AWG, RGB 18/4 AWG
IP Rating
IP20 / IP67 /
45º Optics
Cover
Installation
clips
0.6”
(15mm)
n
30 = 3000K
n
35 = 3500K
n
40 = 4000K
n
B = Blue
nRGB
n
2 Step MacAdam
n
CRI: > 85
Optics
n
20 = IP20
n
120 = 120 degree angle
n
67 = IP67
n
45 = 45 degree angle
Length2
0.8”
(21mm)
Color Temperature
n
13” nom. (320mm) to 80” nom.
(2020mm) OAL for IP20
n
13” nom. (335mm) to 80” nom.
(2035mm) OAL for IP67
Voltage
n
24 = 24VDC fixture voltage
Options
n
BF = Bottom feed cable
n
C10 = 10’(3m) feed cable
n
C20 = 30’(6m) feed cable
n
AC = Adjustable mounting clips
Power Supply3 length x power (watts) = power supply (no enclosure, unless stated)
Non-Dim
D-520-24007: Osram 96W, 24VDC, 120-277VAC
Dim
D-520-24006: Osram 10% 0-10V dimming,
96W, 24VDC, 120-277VAC
IL-JB-LED-24003-120V-DFPN: Lutron LTE 1%
Forward Phase (with neutral) dimming, 5-40W,
24VDC, 120VAC, Case K, dry location enclosure
(not suitable for 48” fixtures)
IL-JB-LED-24010-UNV-D3W: Lutron L3D 1%
3-wire dimming, 5-40W, 24VDC, 120-277VAC,
Case K, dry location enclosure (not suitable
for 48” fixtures)
IL-JB-LED-24010-UNV-DES: Lutron L3D 1%
EcoSystem dimming, 5-40W, 24VDC, 120277VAC, Case K, supplied in a dry location
enclosure (not suitable for 48” fixtures)
RGB
D-550-20003: EldoLED LIN100D2, CV 24V
DMX/Sequencer Interface, requires a 24VDC
driver ordered separately. (DMX control not
included)
See power supply pages for details. lm80 values shown.
3
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
IP20 IP67
(rev9)
1
Line Dimensions
End view
0.8”
(21mm)
Available Lengths with End Feed Cable
Cover
Feed cable
0.6”
(15mm)
1.4”
(35mm)
0.8”
(20mm)
Installation
clips (standard)
IP20
Adjustable
mounting clips
(110º lockable)
End feed - side view
Aluminum extrusion
standard installation clips
end feed power cable (standard)
Bottom feed - side view
1.4”
(35mm)
0.8”
(20mm)
adjustable mounting clips
bottom feed power cable (optional)
IP67
Watts / Fixture
Order Real Total Order Real Total
Code Inches mm Code Inches mm
Low/
High RGB
Blue
Power Power
Power
13
12.60
320
13
13.25
335
3
7
5
17
16.53
420
17
17.19
435
4
10
6
21
20.47
520
21
21.13
535
5
12
7
25
24.41
620
25
25.00
635
6
14
9
29
28.35
720
29
28.94
735
7
17
10
33
32.28
820
33
32.88
835
8
19
12
37
36.22
920
37
36.81
935
9
21
13
41
40.16
1020
41
40.75
1035
10
23
14
45
44.09
1120
45
44.69
1135
11
26
16
49
48.03
1220
49
48.63 1235
12
28
17
52
51.97
1320
52
52.56 1335
13
30
19
20
56
55.91
1420
56
56.50 1435
14
33
60
59.84
1520
60
60.44 1535
15
35
21
64
63.78
1620
64
64.38 1635
16
37
23
68
67.72
1720
68
68.31
1735
17
40
24
72
71.65
1820
72
72.25
1835
18
42
26
76
75.60
1920
76
76.19
1935
19
44
27
80
79.53 2020
80
80.13 2035
20
46
28
IP20 end feed - top view
Available Lengths with
Bottom Feed Cable
12.60” to 79.53” (320mm to 2020mm)
0.27” (7mm)
0.27” (7mm)
IP67 end feed - top view
13.25” to 80.13” (335mm to 2035mm)
0.27” (7mm)
1.1” (28mm)
IP20 / IP67 bottom feed - top view
13.44” to 80.38” (340mm to 2040mm)
0.27” (7mm)
1.3” (33mm)
0.59” (15mm)
IP20 / IP67
Watts / Fixture
Order Real Total
Code Inches mm
Low /
High RGB
Blue
Power Power
Power
13
13.39
340
3
7
5
17
17.32
440
4
10
6
21
21.30
540
5
12
7
25
25.20
640
6
14
9
29
29.13
740
7
17
10
33
33.07
840
8
19
12
37
37.00
940
9
21
13
41
40.94 1040
10
23
14
45
44.88
1140
11
26
16
49
48.82 1240
12
28
17
52
52.76
13
30
19
20
1340
56
56.69 1440
14
33
60
60.63 1540
15
35
21
64
64.57 1640
16
37
23
68
68.50
1740
17
40
24
72
72.44
1840
18
42
26
76
76.38 1940
19
44
27
80
80.31 2040
20
46
28
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
2
Line Power Supplies
Single Color Drivers
Qty.
Case
Nominal Input
Voltage (V)
Nominal Input
Current (A)
Power
Factor
Output Power
Range (W)
Dimming
Mode
Dimming
Control
Dimming
Range
Location
Rating
Osram non-dim
1
120
277
0.97
0.39
0.9
1-96
N/A
N/A
N/A
Damp
D-520-24006
Osram 0-10V dim
1
120
277
0.97
0.39
0.9
1-96
PWM
0-10V
10 –100%
Damp
IL-JB-LED-24003120V-DFPN
Hi-Lume A Series
LED LTE
2
120
0.38
0.99
5-40
PWM
Forward phase
with neutral
1 –100%
Dry
IL-JB-LED-24010UNV-D3W
Hi-Lume A Series
LED L3D, 3-wire
2
120
277
0.38
0.17
0.99
0.96
5-40
PWM
3-Wire
1 –100%
Dry
IL-JB-LED-24010UNV-DES
Hi-Lume A Series
LED L3D, EcoSystem
2
120
277
0.37
0.17
0.99
0.96
5-40
PWM
Ecosystem®
1 –100%
Dry
Part Number
Description
D-520-24007
Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).
3.0”
(76mm)
1.38”
(35mm)
4.2”
(107mm)
1.17"
(30mm)
Pout (max): 96 W
Vout: 24VDC
Iout: 0.04-4ADC
RED
White (N)
9.0”
3.5”
4.5”
supplied in dry
location enclosure
1.53”
(39mm)
96W Dim
LTE (forward phase with neutral)
Wiring Diagram for Forward Phase Control
DIM Return (-) YELLOW
Black (L)
4.9”
(124mm)
Return (-) BLUE
0-10 V DC
n.c.
Red (+)
Black (L)
White (N)
Power Supply
(non-dim)
Purple (+)
Blue (-)
Red (+)
Power Supply
(0-10V dim)
Yellow (+)
Gray (-)
Blue not connected
+V
Dimmed Hot (Black)
Hi-lume®
A-Series
Neutral (White)
LED light
engine
-V
Ground (Green)
Ground
Note: Colors shown correspond to terminal blocks on driver.
L3D (Ecosystem®)
L3D (3-wire)
Wiring Diagram for 3-Wire Control
To 3-wire Dimming Control
Gray (-)
24V DC (+)
96W Non-Dim
0.88”
(22mm)
Neutral (White)
Ground (Green)
Load per driver
Osram
Switched Hot (Black)
Switched Hot (Black)
Dimmed Hot (Orange)
Maximum wiring distance*
Wiring Diagram for EcoSystem® Digital Control
+V
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
To Line
Voltage
Input
1.99”
(51mm)
4.6”
(117mm)
To EcoSystem®
Digital Link
Purple (+)
Wiring diagrams
VOLTAGE
120-277 V AC
50/60Hz
2.0”
4.42”
(36mm)
1.68"
(43mm)
Black (L)
1.0”
(25mm)
8.94"
(227mm)
9.48"
(241mm)
White (N)
0.64”
(16mm)
To Forward Phase Control
Case dimensions
Case 2 Hi-Lume, case K (enclosure supplied)
Case 1 (no enclosure)
+V
Neutral (White)
Ground (Green)
E1 (Purple)
E2 (Purple)
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
Lutron
Wire gauge
≤48W
≤72W
≤96W
#18AWG
37’
25’
18’
≤40W
15’
#16AWG
59’
39’
29’
25’
#14AWG
95’
63’
47’
40’
#12AWG
151’
101’
75’
60’
#10AWG
241’
160’
120’
—
Voltage drop guide for 24VDC. Actual Voltage drop
to be calculated by installer
*
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
3
Line RGB Interface
RGB Control Interface Details
Qty.
Part Number
Description
Nominal Input
Voltage (V)
Maximum Output
per channel (W)
Output Power
Range (W)
D-550-20003
DMX/Sequencer Interface
24
32
96
RGB Control case dimensions (DMX/Sequencer Interface)
110 mm / 4.33”
23 mm / 0.91”
21.5 mm / 0.85”
ø 4.2 mm / 0.17”
10 mm / 0.39”
TC
DMX in +
DMX in -
Ext in
Ext in +
LED supply +
30 mm / 1.18”
DMX in shield
LedSync thru +
10 mm / 0.39”
LedSync thru LedSync shield
Group 1
50 mm / 1.97”
Group 2
LINEARdrive 100D
Group 3
12-28V / 6A Direct voltage controlled LED driver
Group 4
M
153 mm / 6.02”
Wiring Diagram
{
24V
VDC - VDC +
Not connected
TC
DMX in +
DMX in -
DMX in +
DMX in DMX in shield
Ext in
Ext in +
LED supply +
DMX in shield
LedSync thru +
LedSync thru LedSync shield
Group 1
LINEARdrive 100D
12-28V / 6A Direct voltage controlled LED driver
Group 2
Group 3
RGB LED strip
+
R
G
B
Group 4
M
Not connected
See installation / driver instructions for details.
Must order power supply separately
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
4