Fluid-o-Tech magnet drive gear pumps MG300

Fluid-o-Tech magnet drive gear pumps MG300

Fluid-o-Tech magnet drive gear pumps MG300 series
ings are available in Peek™, Ceramic Peek™ or PTFE™.
In operation the MG300 series pumps are noiseless,
pulsation-free and capable of handling relatively high
temperature liquids (up to 120 °C or 248 °F) with low
coefficient of expansion.
Operation at different pressures ranges is possible
thanks to a choice of materials for the magnets.
All pumps are available with:
• 1/8” GAS or NPT
• customized ports upon request
• NSF listing (PTFE™ or Silicon seals)
The MG300 series magnet drive gear pumps are
compact precision performance pumps for a wide
range of specialized applications.
Thanks to the improved design, the MG300 series
grant a more accurate and uniform delivery regardless
of the fluid temperature.
The seal less design with the magnetic transmission
of the rotation is guarantee of a leak proof product.
Static seals are available in PTFE™ / NBR / VITON®/
EPDM/SILICON, in order to guarantee the highest
chemical compatibility with a wide range of fluids.
The housing of the pump and the internal metal parts
are in AISI 316 L stainless steel while gears and bush-
Composition materials
Technical information
Housing
Gears
Temperature range
Max system pressure
SS
PTFE™
-45 to +50 °C /-49 to +122 °F
20 bar/290 psi
SS
Peek™
-45 to +120 °C /-49 to +248 °F
20 bar/290 psi
SS
Ceramic peek™
-45 to +120 °C /-49 to +248 °F
20 bar/290 psi
66.5-75.5 (2.62-2.97 in)
56 (2.21 in)
17.5
(0.69 in)
51 (2 in)
49-58 (1.93-2.28 in)
44.5 ± 0.05
(1.75 in ± 0.002)
45 (1.77 in)
40 (1.58 in)
27 (1.06 in)
15.2
(0.69 in)
5
3. )
in
6x .138
(0
Dimensions in mm
2x1/8" NPT
1.2
(0.047 in)
Main applications
• Medical and surgical equipment
• Ink-jet printing systems
• Sampling
• Hemodialysis apparatus
• Cooling systems
• Food processing equipment
• Laser apparatus
• Laboratory instrumentation
• Lubrication
• Water purification and ultra-filtration
www.fluidotech.it
MG 3 04 X
D
0
P
B
S
G = ferrite
S = rare earths
Internal magnet
3 = with o-ring
Pump series
04
09
13
Gear width
X = AISI 316L
S = SAF 2205
Housing material
D = 1/8" NPT
Type of connections
Pos.
Pos.
0 = without
Relief valve
Ferrite
A1
driving magnet
6 mm bore
9 mm bore
11 mm bore
MGAF05S
MGAF06S
MGAF09S
P = Peek™
T = PTFE™
Gear material
Rare earths
A2
driving magnet
6 mm bore
9 mm bore
11 mm bore
MGAS05S
MGAS06S
MGAS09S
Adapter kit with ferrite
A1 + B
driving magnet
M48 motor
M56 motor
M63 motor
MGBF42S
MGBF56S
MGBF63S
Adapter kit with rare earths
A2 + B
driving magnet
M48 motor
M56 motor
M63 motor
MGBS42S
MGBS56S
MGBS63S
S = Silicon
N = NBR
T = PTFE™
V = Viton®
E = EPDM
GPH l/h
40
10
9
35
8
30
7
25
6
20
5
4
15
3
10
2
5
1
0
0
A1
Static seal material
MG304 @ 1450 RPM
E
D
C
B
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
0 20 40 60 80 100 120 140 160 180 200
GPH l/h
80
20
18
70
16
60
14
50
12
40
10
8
30
6
20
4
10
2
0
0
B
A
1
2
20
3
40
4
5
60
6
80
7
100
8
9
120
10 BAR
18
16
14
12
10
8
6
A
0
20
3
40
4
60
5
6
80
7
100
8
120
9
10 BAR
140 PSI
C
B
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
B
A
1
2
20
3
4
40
5
6
60
7
80
100
8
9
120
10 BAR
B
70
50
40
20
A
0
0
1
2
20
3
40
4
5
60
6
80
A = 1 cSt
7
100
8
120
9
10 BAR
140 PSI
B = 20 cSt
C
B
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
C
110
B
100
90
80
A
70
60
50
0
1
2
20
3
40
4
C = 75 cSt
5
60
6
80
7
100
8
9
120
140
130
120
100
A
0
0
1
2
20
D = 160 cSt
3
40
4
60
5
6
80
7
100
8
120
9
10 BAR
140 PSI
MG304 @ 3450 RPM
C
B
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
PSI
MG309 @ 3450 RPM
l/h
130
120
C
B
110
100
90
80
A
70
60
50
0
0
1
2
20
3
40
4
5
60
6
80
7
100
8
9
120
10 BAR
140 PSI
MG313 @ 3450 RPM
GPH l/h
60 230
58
56
54
52
50
48
46
44
42
40
38
36
B
110
GPH
34
32
30
28
26
24
22
20
18
16
14
10 BAR
C
Code
Code
0 20 40 60 80 100 120 140 160 180 200
140 PSI
MG313 @ 2900 RPM
150
GPH l/h
80
20
18
70
16
60
14
50
12
40
10
8
30
6
20
4
10
2
0
0
PSI
MG309 @ 2900 RPM
120
0
40
38
36
34
32
30
28
60
30
D
GPH l/h
200
52
190
50
48 180
46 170
44
160
42
C
Features
Features
MG304 @ 2900 RPM
l/h
130
140 PSI
MG313 @ 1725 RPM
Description
Description
0 20 40 60 80 100 120 140 160 180 200
GPH
34
32
30
28
26
24
22
20
18
16
14
C
0
GPH l/h
80
20
18
70
16
60
14
50
12
40
10
8
30
6
20
4
10
2
0
0
PSI
MG309 @ 1725 RPM
GPH l/h
120
30
110
28
26 100
24
90
22
80
20
B
2
E
D
0
MG313 @ 1450 RPM
1
GPH l/h
80
20
18
70
16
60
14
50
12
40
10
8
30
6
20
4
10
2
0
0
140 PSI
C
0
MG304 @ 1725 RPM
0 20 40 60 80 100 120 140 160 180 200
C
0
GPH l/h
40
10
9
35
8
30
7
25
6
20
5
4
15
3
10
2
5
1
0
0
PSI
MG309 @ 1450 RPM
0
GPH l/h
26 100
24
90
22
80
20
70
18
16
60
14
50
12
40
10
8
30
6
20
4
10
2
0
0
A2
220
C
210
200
B
190
180
170
160
150
140
120
A
0
0
1
2
20
3
40
4
60
5
6
80
7
100
8
120
9
10 BAR
140 PSI
E = 200 cSt
Note: Performance beyond the broken line zone are reached with the rare earths magnets. Characteristics with water at 20 °C (68 °F) and without relief valve, max vacuum 724 mmHg.
Use filter before pump inlet not larger than 10 micron. Pump weight: 510 g (1,12 Lbs). Temperature requirements different from ambient temperature must be mentioned on the order. Different
materials are available upon request.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
Fluid-o-Tech srl
Via Leonardo da Vinci, 40
20094 Corsico, Milano, Italy
Tel. +39 02 8917071
Fax +39 02 89170799
Fluid-o-Tech Int’l Inc.
161 Atwater St.,
Plantsville CT (USA) 06479
Tel. +1 (860) 276-9270
Fax +1 (860) 620-0193
Fluid-o-Tech Int’l Inc. Japan
203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, Japan
Tel. +81 (0) (3) 3783-9660
Fax +81 (0) (3) 3783-9661
MG3 – 04/10 Ed.
Fluid-o-Tech Asia (Beijing) Co., Ltd
Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRC
Tel. +86 (0) (10) 61684650
Fax +86 (0) (10) 61684651
20 Scheda MG ok:20 Scheda MG
9-03-2009
17:47
Pagina 1
Fluid-o-Tech magnet drive gear pumps MG200 series
In operation the MG200 series pumps are
noiseless, pulsation-free and capable of handling
relatively high temperature fluids with low
coefficient of expansion.
The principle of the magnetic drive comprises
an inner magnet embodied in the pump and
connected to the driving gear, and an outer
magnet connected to the motor shaft.
The pole-to-pole alignment of the two magnets
provides the driving motion to the pump.
Decoupling will occur when the pump load
exceeds the maximum coupling torque provided
by the alignement of the two magnets.
®
The MG200 series magnet drive gear pumps
are compact precision performance pumps for
high technology applications. The magnet
drive principle provides a totally sealed pump
chamber capable of handling a wide range of
corrosive liquids with a high degree of safety.
The housing of the pump and the internal
metal parts are in AISI 316 L stainless steel
and the gears are available in PTFE™ or Peek™.
Ø 56
• 1/8" GAS or NPT ports
• Relief valve available upon request
• NSF listed pumps for potable water
Composition materials
Seal
Gear
316 L SS
PTFE™
PTFE™ -45 to +50 °C /-49 to +122 °F
20 bar/290 psi
316 L SS
Peek™ PTFE™ -45 to +120 °C /-49 to +248 °F
20 bar/290 psi
(65.5-80.5)
Ø 51
Technical information
Housing
Temperature range
Max system pressure
Ø 44.5 ±0.05
48-63
17.5
Ø 40
Ø 32
Ø 27
15.2
6x
Ø
5
3.
1.2
2x1/8"NPT
Dimensions in mm
Main applications
• Medical and surgical equipment
• Ink-jet printing systems
• Sampling
• Hemodialysis apparatus
• Cooling systems
• Food processing equipment
• Laser apparatus
• Laboratory instrumentation
• Lubrication
• Water purification and ultra-filtration
www.fluidotech.it
20 Scheda MG ok:20 Scheda MG
9-03-2009
17:47
Pagina 2
Fluid-o-Tech magnet drive gear pumps MG200 series
MG 2 09 X
G = ferrite
S = rare earths
Internal magnet
2 = PTFE™
flat seal
Pump series
04
09
13
Gear width
D
0
P
B
T
A1
A2
X = AISI 316L
S = SAF 2205
Y = AISI 303
Housing material
Pos.
Pos.
D = 1/8" NPT
G = 1/8" GAS
Type of connections
0 = without
1 = with
Relief valve
P = Peek™
T = PTFE™
Gear material
T = PTFE™
Static seal material
GPH l/h
10 40
9
8
7
6
5
4
3
2
1
0
MG 204 @ 1450 RPM
30
E
25
D
C
20
15
B
10
A
5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
0 20 40 60 80 100 120 140 160 180 200
70
60
C
50
B
40
30
20
10
0
A
0
0
GPH
26
24
22
20
18
16
14
12
10
8
6
4
2
0
1
2
20
3
40
4
5
60
6
80
l/h
100
7
8
9
10 BAR
C
80
70
B
60
50
40
30
20
10
0
A
0
0
1
20
2
3
40
4
5
60
6
80
7
8
9
10 BAR
100 120 140 PSI
MG 204 @ 1725 RPM
C
25
20
B
15
10
5
0
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
0 20 40 60 80 100 120 140 160 180 200
18
16
14
12
10
8
6
4
2
0
70
C
B
40
30
20
10
0
A
0
0
1
2
20
3
4
40
60
GPH l/h
120
30
110
28
26 100
24 90
22
80
20
18 70
16 60
14
50
12
10 40
8 30
6
20
5
6
7
80
8
9
0
20
40
4
60
5
6
80
A = 1 cSt
MGAS06S
MGAS09S
MGAS11S
A1 + B
Adapter kit with ferrite
driving magnet
M48 motor
M56 motor
M63 motor
MGBF48S
MGBF56S
MGBF63S
A2 + B
Adapter kit with rare earths
driving magnet
M48 motor
M56 motor
M63 motor
MGBS48S
MGBS56S
MGBS63S
60
D
50
C
40
8
9
10 BAR
100 120 140 PSI
B = 20 cSt
C = 70 cSt
GPH l/h
20 80
B
30
20
10
0
A
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
l/h
130
120
C
110
B
100
90
80
70
60
50
A
0
1
2
20
3
40
4
5
60
6
80
7
8
9
B
150
140
130
120
110
100
A
0
0
1
2
20
D = 160 cSt
3
40
4
60
5
50
6
80
7
8
9
10 BAR
100 120 140 PSI
B
40
30
20
A
10
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BAR
l/h
130
PSI
MG 209 @ 3450 RPM
120
C
110
B
100
90
80
70
A
60
50
0
0
1
2
20
3
40
4
5
60
6
80
7
8
9
10 BAR
100 120 140 PSI
MG 213 @ 3450 RPM
GPH l/h
60 230
58
56
54
52
50
48
46
44
42
40
38
36
C
160
C
60
100 120 140 PSI
170
MG 204 @ 3450 RPM
70
0 20 40 60 80 100 120 140 160 180 200
GPH
34
32
30
28
26
24
22
20
18
16
14
10 BAR
MG 213 @ 2900 RPM
180
18
16
14
12
10
8
6
4
2
0
PSI
MG 209 @ 2900 RPM
GPH l/h
200
52
190
50
48
46
44
42
40
38
36
34
32
30
28
7
MG 204 @ 2900 RPM
70
0
A
3
6 mm bore
9 mm bore
11 mm bore
0 20 40 60 80 100 120 140 160 180 200
B
2
Rare earths
driving magnet
100 120 140 PSI
C
1
A2
10 BAR
MG 213 @ 1725 RPM
0
MGAF06S
MGAF09S
MGAF11S
GPH
34
32
30
28
26
24
22
20
18
16
14
60
50
6 mm bore
9 mm bore
11 mm bore
PSI
MG 209 @ 1725 RPM
GPH l/h
20 80
Code
Code
Ferrite
driving magnet
18
16
14
12
10
8
6
4
2
0
30
Features
Features
A1
GPH l/h
20 80
E
D
35
100 120 140 PSI
MG 213 @ 1450 RPM
90
9
8
7
6
5
4
3
2
1
0
PSI
MG 209 @ 1450 RPM
GPH l/h
20 80
18
16
14
12
10
8
6
4
2
0
GPH l/h
10 40
35
Description
Description
220
C
210
200
B
190
180
170
160
150
140
120
A
0
0
1
20
2
3
40
4
60
5
6
80
7
8
9
10 BAR
100 120 140 PSI
E = 200 cSt
Note: Performance beyond the broken line zone are reached with the rare earths magnets. Characteristics with water at 20 °C (68 °F) and without relief valve, max vacuum 724 mmHg.
Use filter before pump inlet not larger than 10 micron. Pump weight: 400 g (0,90 Lbs). Temperature requirements different from ambient temperature must be mentioned on
the order. Different materials are available upon request.
MG2 – 03/09 Ed.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
Fluid-o-Tech srl
Fluid-o-Tech Int’l Inc.
Fluid-o-Tech Int’l Inc. Japan
Fluid-o-Tech Asia
Via Leonardo da Vinci, 40
20094 Corsico, Milano, Italy
Tel. +39 02 8917071
Fax +39 02 89170799
161 Atwater St.,
Plantsville CT (USA) 06479
Tel. +1 (860) 276-9270
Fax +1 (860) 620-0193
203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, Japan
Tel. +81 (0) (3) 3783-9660
Fax +81 (0) (3) 3783-9661
Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRC
Tel. +86 (0) (10) 61684650
Fax +86 (0) (10) 61684651
(Beijing)
Co., Ltd