after. before. benefits of changing out an old graduate or edpac unit

after. before. benefits of changing out an old graduate or edpac unit

BENEFITS OF CHANGING OUT AN OLD GRADUATE OR
EDPAC UNIT WITH A NEW AIREDALE CLASSMATE®
1. INCREASE efficiency with minimal changes to existing conditions
Cooling Efficiency (EER)
ClassMate DX/HP
Graduate
% Increase
2
12.1/11.2
9.4
22.3/16.1%
3
11.0/10.5
9.3
15.5/11.4%
4
11.6/11.0
9.2
20.7/16.4%
5
9.7/9.0
8.8
9.3/2.2%
*EER calculated at AHRI standard conditions
Heating Efficiency (COP)
ClassMate HP
Graduate
% Increase
2
3
3.4
3.7
1.8
1.9
47.1% 48.6%
4
4.0
1.8
55%
5
3.6
1.9
47.2%
*COP calculated at AHRI standard conditions
*Above figures do not include benefit of multi-stage compressor and fan operation. For IPLV ratings and part load efficiency information, please contact your local Airedale representative
2. no changes to existing duct work required
BEFORE.
AFTER.
The ClassMate uses CF®
technology, exclusive to
Modine, for unmatched
efficiency and performance
3. Minimal bookshelf modifications
Unit Dimensions
Height
Width
Depth
ClassMate
(2-3 tons)
90”
42”
36”*
ClassMate
(4-5 tons)
90”
48”
36”*
Graduate
(2-5 tons)
83.125”
43”
35.625”
EdPac
(2-5 tons)
84.875”
42.5”
32.25”
*Shows depth with 6” rear extension needed to fit current wall opening
4. Keep same building envelope openings
(6” Rear Extension Available)
Wall Sleeves
Sill Height
Height
Width
Graduate
30.188”
27.5”
34.75”
EdPac
37.75”
27.25”
35.875”
The ClassMate can accommodate
Graduate or EdPac existing wall
opening conditions with 6”
rear extension
*Face velocity should be calculated to ensure no water/precipitation infiltration
*Smaller opening adds extra static pressure to unit
Visit us at
ModineHVAC.com/schoolsystems
to learn more, or call 1-866-823-1631.
Follow us on Twitter @ModineHVAC
©2013 Modine Manufacturing Co. AIR80-180