Fine Cutting and Micromachining Applications Lab

As a system integrator, we believe that
having a complete understanding of the
application, laser, and optics choices
benefits our customers by enabling us
to not only deliver better systems, but
also to provide more complete process
support. We develop almost every
application for each system we ship in
our in-house applications labs, and fine
cutting and micromachining applications
are no exception. In addition to process
development for systems, we also
undertake short sample runs on the exact
hardware on which the system will be
based to confirm process reliability.
Our application lab doors are always open
to support our customers and to provide
an application feasibility or development
resource - even after a system has shipped.
Sigma stent and tube cutting system
LAB RESOURCES AND CAPABILITIES
•Feasibility and short run process development
testing
Medical cannula processing
Metal micromachining
Implantable stent cutting
Glass and ceramic drilling
Hypodermic tube cutting
Silicon wafer micromachining
•Femtosecond, picosecond, nanosecond, and
microsecond lasers
•IR, green, and UV wavelengths
•Scan head, stent cutter, and XY motion platforms
•Optical and SEM inspection
•3D digital microscope
•Mini CMM dimensional measurement and verifier
1/2
LASER MICRO PROCESSING
Fine Cutting and Micromachining
Applications Lab
LASER MICRO PROCESSING
APPLICATIONS
Nanosecond IR texturing of metal for
plastic-to-metal bonding
Femtosecond IR laser drilling of
medical polymer
Nanosecond UV laser wire stripping
Microsecond fiber laser and femtosecond
IR laser cutting of metal stents
Picosecond UV micro milling of
fluoropolymer
Femtosecond IR cutting of
polymer stent
Materials
Metals, polymers, glasses, and ceramics
Laser Micro Processes
Cutting, drilling, milling, ablation, scribing, texturing, marking
Laser sources
30 W sealed CO2 laser
20-100 W single and multimode nanosecond IR fiber lasers
Picosecond UV (15 W), green (30 W), and IR (50 W)
Femtosecond IR (5 W), and green (2.5 W)
200 W single mode CW / modulated IR fiber laser
Motion platforms
Stent and tube cutter
Three wavelength (UV, green, and IR) scan head workstations
300 mm x 300 mm precision XY table
Inspection
400X optical microscope, 1000X 3D microscope, SEM (upon request)
Measurement
Mini CMM system verified to ± 3 micron accuracy
1820 S. Myrtle Ave. • Monrovia, CA 91016 US
T: (626) 303-5676 • F: (626) 358-8048
[email protected] • www.amadamiyachi.com
ISO 9001 Certified Company • 24/7 Repair Service: 1-866-751-7378
Amada Miyachi
America Mexico
El Paso, TX 79925
T: (915) 881-8765
[email protected]
Amada Miyachi do
Brasil Ltda.
Sao Paulo, Brasil
T: +55-11-4193-3607
[email protected]
EUROPE
Amada Miyachi
Europe GmbH
Puchheim, Germany
T: +49 (0) 89 83 94 030
[email protected]
ASIA
Amada Miyachi Co., Ltd.
Noda, 278-0016 Japan
T: +81-4-7125-6177
[email protected]
Amada Miyachi
Shanghai Co., Ltd.
Shanghai, China
T: +86-21-6448-6000
[email protected]
Amada Miyachi
Korea Co., Ltd.
Gyeonggi-do, Korea
T: +82-31-8015-6810
[email protected]
Amada Miyachi
(Thailand) Co., Ltd.
Samutprakarn, Thailand
T: +66-2751-9337-8
[email protected]
Amada Miyachi
Taiwan Co., Ltd.
Taipei, Taiwan R.O.C.
T: 886-2-2397-4778
[email protected]
Amada Miyachi
Vietnam Co., Ltd.
Ho Chi Minh City, Vietnam
T: +84-8-3771-7972
Specifications subject to change without notice. Copyright© 2016 Amada Miyachi America, Inc. The material contained herein cannot
be reproduced or used in any other way without the express written permission of Amada Miyachi America, Inc. All rights reserved.
2/2
Amada Miyachi
India Pvt., Ltd.
Bangalore, Karnataka
T: 080-4092-1749 & 3549
[email protected]
follow us on:
04/16
AMERICAS
Amada Miyachi
America Midwest
Wixom, MI 48393
T: (248) 313-3078
[email protected]