5618 warming cabinet

CUSTOMER:
REFERENCE:
5618 WARMING CABINET
PRODUCT SPECIFICATION
PRODUCT
A unique 18'' deep recessed warming cabinet with “look-in”
tempered glass doors into two separate, independently
controlled, convection heated chambers. Ideal for installation
along with recessed stainless steel OR cabinets. Temperature
range in each compartment is adjustable from 90°F (32°C) to
160°F (71°C) and is provided with a “lock-in” feature to prevent
unauthorized changes to the temperature settings.
APPLICATION
The Getinge 5618 Warming Cabinet is designed for the warm
storage of saline solutions and/or blankets used in the care of
patients in areas such as surgery, recovery, OB/GYN, ICU or
ER. Note: This product is not to be used for the storage of
blood or blood products.
DIMENSIONS
Exterior:
Width
30'' (762mm)
Height
60'' (1524mm)
Depth
18''.7 (457mm)
Interior:
Upper:
Lower:
26'' (660mm)
26'' (660mm)
13'' 1(330mm)
40'' (1016mm)
16.7'' (425mm)
16.7'' (425mm)
CAPACITY
Upper Compartment: volume: 2.9 ft3 (83 L)
15 two-liter flasks or equivalent dry goods.
Lower Compartment: volume: 9.8 ft3 (276 L)
45 two-liter flasks or equivalent dry goods.
Total useable volume: 12.7 ft3 (359 L)
QUALITY STATEMENT
DOOR SWING
Left hand hinged
Right hand hinged
MOUNTING
Freestanding w/Pedestal Base
Recessed in wall without Pedestal Base
Recessed Cabinet w/Pedestal Base
Wall Mounted Cabinet
ELECTRICAL SUPPLY
115V, single phase, 50/60 Hz
230V, single phase, 50/60 Hz
Confidence in the Getinge Group is the most important quality
criterion. This must be the hallmark of all our external and
internal commitments, activities and products. Products and
services supplied by Getinge must conform to the agreed
terms and expectations to ensure recommendations for further
business. The achievement of these quality goals is the basis
for a continued competitive and successful enterprise.
STANDARDS AND CODES
This warming cabinet has been designed to conform to the
requirements of:
• NFPA70
• ETL Listed to UL-544
• CETL Listed to CSA C22.2 No. 151
• California Seismic Anchoring Requirements
CONTROLS
The control panel for each compartment is located
conveniently at eye level in the door frame of the compartment
being controlled.
Page 2 of 4
Page 3 of 4
CONSTRUCTION
The cabinet unit is double walled, type 304 stainless steel
construction. Insulation is provided to conserve energy and
insure that the exterior surface temperature does not exceed
120°F (49°C). Doors are tempered glass panes framed with
type 304 stainless steel. Temperature of glass panes does not
exceed 120°F.
SERVICING
Control components are mounted in the rear of the upper
compartment, permitting convenient service access from the
front of the unit. Similar provisions are made for easy removal
of fans, heater elements and control boards from each
compartment. Integral L.E.D. displays provide control and
heater-on information for easy serviceability.
Getinge USA, Inc.
1777 East Henrietta Road
Rochester, New York 14623-3133
U.S.A.
Phone: (800) 475-9040
Fax:
(585) 272-5033
[email protected]
www.getingeusa.com
FEATURES
• “Look-In” glass doors provide visual inventory control
without opening doors
• Large useable internal volume for storage of solution bottles
and blankets
• Forced air convection heating is more effective and
eliminates the need for blanket racks
• Independent heat control provides flexibility of different
temperatures in each compartment
• Programmable for °F and °C display
• Supervisory “Lock-In” of temperature set point prevents
unauthorized changes of temperature
• Non-volatile memory protects temperature settings in the
event of a power loss
• An LED display will alert operator of an interruption or power
loss
• Overheat protection will shut the heaters off and provide an
audible alarm for the operators
• Adjustable shelves provided to accommodate various types
of loads
• Mounting options include floor mounted on a pedestal
base, wall mounted or recessed in a wall
OPTIONS
Six (6) foot power cord kit to replace standard hard wire
connection
Extra storage shelf - 18” deep
Getinge is constantly reviewing its products for improvements. Consequently, the actual product may differ slightly from the product pictured and described here.
Heated air is circulated over the load by fans, located in each
of the two compartments. The heated air is distributed evenly
over the load, achieving convection heating. The upper compartment is capable of holding 15 two-liter square flasks or a
quantity of blankets. Two adjustable shelves are provided in
the lower compartment which can hold 45 two-liter square
flasks or a quantity of blankets. Once the selected temperature
is attained, it will be controlled throughout within 10°F (5.5°C)
of the selected temperature. A full load of two-liter flasks in the
upper compartment will be heated to 110°F within 8 hours or
less. In the event of a power loss, once power is restored the
unit will indicate a power loss has occurred and resume its prepower loss state.
* Applies only to Domestic U.S., Puerto Rico, and Canadian
shipments.
Printed in U.S.A.
PERFORMANCE
Getinge USA, Inc. warrants that each warming cabinet is
carefully tested, inspected and leaves the factory in proper
working condition, free from visible defects. Warming Cabinets
are warranted for one year from the start of the warranty,
including parts and labor (excluding expendable parts).
Arjo, Getinge and MAQUET are registered trademarks.
L.E.D. displays provide the following information:
Control off
Chamber temperature
Power loss
Temperature set point
Overheat
Set point lock/unlock
Heater on
Fahrenheit or Celcius
An audible alarm indicates overheat condition.
WARRANTY*
DS5618 1106
Control touch pads provide selection of:
Control on/off
Set point from 90°F (32°C) to 160°F (71°C)
Temperature display in °F or °C
Temperature set point “Lock-In”
THE GETINGE GROUP is a leading global provider of equipment
and systems that contribute to quality enhancement and cost
efficiency within healthcare and life sciences. Equipment, services
and technologies are supplied under the brands ARJO for patient
hygiene, patient handling and wound care, GETINGE for infection
control and prevention within healthcare and life science and
MAQUET for surgical workplaces, cardiopulmonary and critical care.