sandvik dl331-5c production drill

SANDVIK DL331-5C
PRODUCTION
DRILL
Sandvik DL331-5C is a fully-mechanized and highly versatile
one-man-operated electro-hydraulic top hammer longhole
drill for underground mining in drifts with cross-sections of 3
meters by 3 meters or larger. It is capable of drilling vertical
and inclined plane rings and single or parallel Ø51…76 mm
longholes up to 23 meters in depth, using R32- and T38series extension drill steels. Sandvik DL331-5C is mounted
on a four-wheel drive frame-steered and diesel-powered
undercarrier. The rig is equipped with Sandvik HLX5 hydraulic
rock drill, LHF2000 drilling module, SB60P longhole boom,
THC560 hydraulic control system and operator’s safety cabin
for maximum safety, performance, reliability and total drilling
economy. The 360-degree boom rotation and wide swing and
tilt angles make the unit suitable for most mining methods
and a range of drilling applications. The undercarriage layout is
designed for good visibility, mobility and balance, ensuring fast
and safe manoeuvring in narrow drifts.
The operating and maintenance interface of Sandvik DL3315C are designed for easy access and safe and fast operation,
and all service points are accessible from ground level. The
control system is fitted with automatic functions for maximum
performance and drilling accuracy
1. SANDVIK MINING / TS2-045:03/ENG
TECHNICAL SPECIFICATION
SANDVIK DL331-5C
TECHNICAL SPECIFICATION
HYDRAULIC ROCK DRILL
ERHC12 ROD CARROUSEL
Rock drill
HLX5
Percussion power
20 kW
Percussion pressure
12+1 MF rods R32
11+1 MF rods T38
(spec sheet TS2-168)
Capacity
Max. 220 bar
Percussion rate
67 Hz
Rotation speed
Max. 250 rpm (with OMS80)
Rotation torque
400 Nm (with OMS80)
Hole size
51 - 76 mm
Hole length
2”1/32 - 3”
Up to 23 m
Recommended rod
75ft
T38 - Hex 35 - R32
T38 - Hex 35 - Alpha 330
T38 - Hex 35 - R35
Shank adapter
HYDRAULIC SYSTEM
Powerpack
HPP 555 (55kW)
Percussion pump
100 cc (variable)
Rotation pump
Weight
210 kg
462.9 lb
Tank filling
Length
955 mm
37.6 in
Oil cooler
87 mm
3.4 in
Shank lubrication device
20 micron (pressure)
10 micron (return)
Oil tank volume
T38 (male)
Profile height
45 cc (gear)
Filtration size
Tool set for hydraulic
adjustment
180 liters (drilling)
47.5 US gal
55 liters (tramming)
14.5 US gal
Electric pump
Water cooled. Cooling capacity 1 x 30 kW
See spec sheet 2-9100
Air / oil mist, SLU-1
Air consumption
250 - 350 l/min
Oil consumption
180 - 250 g/h
Inflating device for accumulator
See spec sheet 2-9110
BOOM
Boom
SB60P
Parallelism
Automatic hydraulic
CONTROL SYSTEM
Type
Full and collaring power
Adjustable at control panel
Drilling feed thrust pressure
Adjustable at control panel
Water flushing
1200 mm
47.2 in
Drilling air / water flushing
Rear stinger
1200 mm
47.2 in
Back pressure
2400 kg
5291 lb
Feed-controlled percussion
Roll-over angle
360º
Reduced power for collaring, full power for
drilling and adjustable
Rotation speed
Boom extension
Boom weight, net
THC560, LH hydraulic
Boom controls
Automatic
Manual selection at control panel
Adjustable at control panel
Automatic
Fully proportional
Warning display
FEED
Feed
LHF2006
Feed force
Max. 20 kN
Feed extension
1200 mm
Extension rod
3.9 ft
Round 32/39/46
Front stinger
600 mm
23.6 in
FEED DIMENSIONS
Feed
LHF2004*
LHF2005*
LHF2006
Total
Length
Extension Min. operating
rod length
dimension
Net Weight
ELECTRIC SYSTEM
Total input power
Main switch
IP classification
380-690 VAC
Voltage fluctuation
± 10%
Automatic cable reel
TCR1
Cable reel control (in & out)
1225 mm
3000 mm
710 kg
Sealed AGM batteries
112.2 in
48.2 in
118.1 in
1565 lb
Auxiliary outlet
3155 mm
1525 mm
3300 mm
725 kg
Front lights
124.2 in
60 in
129.9 in
1598 lb
3460 mm
1830 mm
3600 mm
740 kg
136.2 in
72 in
141.7 in
1631 lb
(combined working and driving)
2. SANDVIK MINING / TS2-045:03/ENG
At the operator station + rear of unit
2 x 12V, 95 Ah
1 x 230V outlet Max. 4500VA
3-phase outlet, network voltage
2 x 35W HID (24V) + 2 x 70W (24V)
Rear working lights
2 x 70 W (24V)
Rear driving lights
2 x 70 W (24V)
Positioning lights
** Additional options features/components
MSE 5
See spec sheet TS2-132
Standard voltages
2850 mm
*Alternative options features/components
70kW
Remote controlled search light
2 x laser type
1 x 35 W HID (24V)
SANDVIK DL331-5C
TECHNICAL SPECIFICATION
FLUSHING SYSTEM
OPTIONS & PACKAGES
Flushing
Water
Water pump type
WBP1
Water pump capacity
33 l/min
Water pump inlet pressure
2 bar (Min.)
Flushing water pressure
10 - 20 bar
External air connection
IP5 air cleaner
Air compressor
CTN10, 1m3/min (7 bar)
Rock drill
Recommended rod*
Shank adapter*
Power extractor**
Feed
LHF feed lengths*
Rear stinger extension**
Instrumentation
Angle**
Visual angle indicators**
Hydraulic system
Biodegradable oils*
TRAMMING & OPERATOR STATION
Tramming speed
Horizontal: 12 km/h
7.4 mph
14% = 1:7 = 8º 5 km/h
3.1 mph
Gradeability / Inclination
Max. 15º / 5º
Safety cabin
FOPS/ROPS (ISO3449)
Low cabin ROPS < 18000 kg
High cabin ROPS < 16000 kg
Operation
Standing drilling, seated tramming
Sound pressure level
according to EN791
Operator station: 80 db(A)
Ergonomic, adjustable for tramming including seat belt
Seat
Air conditioning
Filtration 100µ
Cabin heating
During drilling and tramming
Carrier
NC5
Carrier type
Wheel-mounted, frame steering
Frame steering
± 40º
Rear oscillation
± 10º
Ground clearance
320 mm
Diesel engine
12.6 in
Deutz TCD2012, 74kW, Tier 3, Stage 3A
Diesel engine control
Electronic, EMR
Exhaust catalyzer
Standard
Transmission
Hydrostatic, automotive
Axles
Spicer 112 with extended differential breathers
Tires
12.00-20
Hydrostatic drive system and SAHR type, fail
safe wet disc
Parking and
emergency brakes
SAHR type, fail safe wet disc brakes
Fuel tank
80 liters
Hydraulic jacks
21.1 US gal
Outriggers (front)
Vertical (rear)
Brake release
Total weight
Depending on options
Greasing system
Centralized greasing points**
Greasing unit with pump, reel and
nozzle**
Automatic greasing system**
Electric system
Optional voltage*
Starting method**
Electric cable rubber or PUR**
Electric power interlock**
Optional outlet**
Battery jump start**
Extra working lights**
Amber strobe light**
Flushing system
Air compressor*
CARRIER
Service brakes
Cleaning system
Pressure cleaning system with reel**
HP cleaning system with reel**
Manual hand pump
Around 15500 kg
*Alternative options features/components
3. SANDVIK MINING / TS2-045:03/ENG
Around 33069 lb
** Additional options features/components
MF rods R32, T35 and T38
R32 or T35
For HLX5
LHF2004, LHF2005
Add 1 meter on the rear stinger
TIS DDS (drilling direction, depth
and speed) with data logging
Spirit levels 2 pcs on feed
Shell Naturelle HFE46/HFE68
Max. 15 bar
Max.180 bar
Boom and cassette
Manual
Carrier, boom and cassette
1000 VAC, 50 Hz
Star delta starter, 380VAC-575VAC
DOL, 600VAC - 690VAC
Depending on voltage
(spec TS2-121)
Powerpack starts only
when jacks are on ground
230V outlet Max.16A
3-phase outlet, network voltage
2 x 35 W HID (24V)
LED (24V)
Water hose reel with water hose**
Water hose with hooks**
CTN16 (11kW, 1.6m³/min)
CTN28 (18,5 kW, 2.8m³/min)
For external supply of air and water
2x60l air receivers, requires air
compressor CTN16 (11kW)
32 mm (1”¼); 80 meters
32 mm (1”¼); 80 meters
Fire suppression system
Handheld fire extinguisher**
Manual fire suppression system**
Automatic fire suppression system**
1 or 2 pcs 9kg, Type ABC, Desautel
6 nozzles (incl.1 x extinguisher)
6 nozzles (incl.1 x extinguisher)
Air mist flushing**
End of hole flushing**
Tramming & operator station
Lowered cabin* (seated operation)
Seat*
CD player/radio/MP3**
Front screen protection bar**
Carrier
Tires*
Hydraulic jacks*
Fast filling systems**
Wheel chocks and holder**
Reversal rotation for cleaning**
Packages
Regional packages**
Harsh water packages**
Extra items
Ground fault and
overcurrent protection**
Spare rock drill**
Spare wheel assembly**
Special tools for rock drill**
Documentation**
Height 2670 mm
T back seat
Requires 12VAC outlet
Foam-filled tires
Telescopic (front)
Complete
2 pieces
Engine cooler and fan tramming
oil cooler fan
LAM, USC, AUS, EUR
Basic or advanced
(spec sheet TS2-049)
VYK
Standard or foam-filled
Extra manuals
SANDVIK DL331-5C
TECHNICAL SPECIFICATION
J
A
F
B
31°
29°
55°
C
L
G
E
I
M
DL 331
SANDVIK
K
25°
H
D
AC
Q
AB
DL 331
SANDVIK
RS
AA
15°
T
N
O
P
29.5"
750 mm
16°
U
W
40°
V
Y
X
Z
MAIN DIMENSIONS
A
600 mm
23.6 in
N
1980 mm
78 in
B
160 mm
6.3 in
O
3070 mm
121 in
C
5480 mm
215.7 in
P
3305 mm
130 in
D
7000 mm
275.5 in
Q
2920 mm
115 in
R
1950 mm
76.8 in
S
1830 mm
72 in
T
2810 mm
110.7 in
U
1500 mm
59 in
V
1500 mm
59 in
W
6745 mm
265.5 in
X
9760 mm
384.2 in
Y
1200 mm
E
5200 mm
204.7 in
F
2175 mm
85.6 in
G
5400 mm
212.6 in
H
2670 mm
105.1 in
I
7665 mm
301.7 in
J
6800 mm
267.7 in
K
4600 mm
181.1 in
L
2580 mm
101.6 in
LHF2004*
LHF2005*
LHF2006
Min.
3000 mm
118.1 in
3300 mm
129.9 in
3600 mm
141.7 in
Max.
5050 mm
198.8 in
5355 mm
210.8 in
5660 mm
222.8 in
M
LHF2004
Z
47.2 in
LHF2005
LHF2006
mm
in
mm
in
mm
in
11120
437.8
11415
437.8
11415
437.8
CORNERING
AB
3180 mm
AC
6600 mm
260 in
AD
4010 mm
160 in
125.2 in
DISTRIBUTOR:
Sandvik Mining reserves the right to make changes to the information
on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
4. SANDVIK MINING / TS2-045:03/ENG
www.mining.sandvik.com
© Sandvik Mining 2014 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
COVERAGE