M etalw orkin g Tools

Metalworking Tools
2006 Metal Slick
Metal Working Tools
Punches: Designed to create indentations in any metal surface for marking or drilling.
26R00-1
Prick Punch
28R00-1
Center Punch
38R04-1
Self-Centering Center Punch
Creates slight accurate
indentation for spot marking
Creates deep indentation for
drilling or making pilot holes.
Creates perfectly centered holes
in metal for mounting hardware.
Prick Punch
28R45-1
High Speed Steel
Center Punch
44R10-1
Cold Chisel
Hardened to Rockwell Rc65 for
precision marking of hardened
steel.
5/16” Cold Chisel to remove rivets, screws, nails or other metal
fasteners.
Center Punch
32R00-1
Double Ended Prick Punch
& Center Punch
Prick Punch creates slight indentation for spot marking. Center
Punch creates deeper indentation for drilling & pilot holes
Spring Tools®
By Noxon
2921 N. University, Spokane WA 99206
(509) 926-0557 • (800) 356-6966 • Fax (509) 926-7362
www.springtools.com
Made In U.S.A
Metalworking Tools
Pin Punches
Pin Punches - Long Reach
Part#
48R02-1
48R03-1
48R04-1
48R05-1
Description
Long Pin Punch
Long Pin Punch
Long Pin Punch
Long Pin Punch
-
1/16” with a 1 5/8” Tip
3/32” with a 1 7/8” Tip
1/8” with a 2 1/4” Tip
5/32” with a 2 1/2” Tip
Pin Punches - Medium Reach
Part#
48R12-1
48R13-1
48R14-1
48R15-1
Description
Med. Pin Punch
Med. Pin Punch
Med. Pin Punch
Med. Pin Punch
-
1/16” with a 1 3/8” Tip
3/32” with a 1 3/8” Tip
1/8” with a 1 3/8” Tip
5/32” with a 1 3/8” Tip
Pin Punches - Short Reach
Designed to remove drift
pins, roll pins, clevis pins,
spring pins, dowel pins
and more!
Part#
48R22-1
48R23-1
48R24-1
48R25-1
Description
Short Pin Punch
Short Pin Punch
Short Pin Punch
Short Pin Punch
-
1/16” with a 3/4” Tip
3/32” with a 3/4” Tip
1/8” with a 7/8” Tip
5/32” with a 7/8” Tip
ID Stamping Kit
Professional Grade 38 piece Mechanics I.D. Stamper Set: Easily mark pistons and other
components during tear down. Great for identification on all forms of mild steel and other hard
surfaces. The interchangeable bits are marked with their associated character for easy alignment & use. Kit includes Driver, A-Z, 0-9, Punctuation, Organizer Case and 12 additional slots
IDS603
for extra bits. Part#
Fastener Re-Keying Kit: Damaged fasteners or stripped screw heads? Up to 3500 psi impact
and hardened bits repair damaged fasteners. Impact can also loosen corroded or stuck fasteners. Kit includes Driver, (2) #1 & #2 Phillips, (2) 3/16” & 1/4” Slotted, #1 & #2 Square Drive,
Torx™ #20 & #25 and hard case. Part#
RK905
ID Stamper / Re-Keying Kit: Kit includes driver, 38 piece ID stamper set and 12 re-keying bits
with hard case. Part# IDRK905
Metalworking Assortments -
Tools plus carrying / storage case
2 Piece Rivet Removal Set AMA1005
High Speed Steel Center Punch 28R45-1,Cold Chisel 5/16” 44R10-1
4 Piece Automotive & Metalworking Set AMA996
High Speed Steel Center Punch 28R45-1, Prick Punch & Center Punch 32R00-1, Self
Centering Center Punch 38R04-1, Cold Chisel 5/16” 44R10-1
Long Pin Punch 4 Piece Set PPL503
1/16”, 3/32”,1/8” and 5/32” diameter pins.Tool lengths are 1 5/8” to 2 1/2” .
Medium Pin Punch 4 Piece Set PPM503
1/16”, 3/32”,1/8” and 5/32” diameter pins. Tool lengths are 1 3/8”.
Short Pin Punch 4 Piece Set PPS503
1/16”, 3/32”,1/8” and 5/32” diameter pins. Tool lengths are 3/4” to 7/8”