tillage and planting

Transcription

TILLAGE AND PLANTING
AFTER MARKET SUPPORT
EARTH METAL
®
LONG-LASTING STRENGTH
Set the stage for higher yields—with the strength and durability of
New Holland Earth Metal® disk blades and sweeps. With tough,
flexible alloy-steel construction—based on years of in-depth research
on tillage and planting agronomics—these disk blades handle even
the toughest residue. Thorough testing ensures superior durability
and long life—saving you unnecessary downtime. And, with one of
the largest selections in the industry, there’s an Earth Metal blade or
sweep for every equipment brand and application.
VISIT YOUR NEW HOLLAND DEALER OR GO ONLINE TO THE
PARTSTORE TO VIEW THE ENTIRE EARTH METAL LINE.
TABLE OF CONTENTS
CULTIVATORS6
DISK HARROW10
FORM THE FOUNDATION
FOR SUCCESS WITH SMART
SOLUTIONS FROM NEW HOLLAND.
From unpredictable weather patterns to new techniques,
successful tillage is a moving target. At New Holland, we
strive to help you stay on top of these challenges—with
the right technologies, parts and service for your farming
needs.
The genuine New Holland parts and expert tips
throughout this book aim to help you achieve higher
yields and greater success by getting the right start
with your tillage efforts. In fact, the only parts and kits
you’ll see in this book are those that meet our rigorous
engineering and testing standards.
Quality parts aside, your dealer is always ready to
assist you with Certified Maintenance Inspections,
Planned Maintenance Agreements, extended warranties,
and sound advice when it comes to the health and
performance of your equipment. Consider this book
a supplement to their expertise.
.
Brian Spencer
Parts Marketing Manager
Tillage, Planting and Seeding Products
CNH Industrial Parts & Service
VERTICAL TILLAGE26
DEEP TILLAGE27
CHISEL PLOW SWEEPS
28
COULTERS30
MOLDBOARD PLOWS32
PLANTERS34
AIR HOE DRILLS36
DISK DRILLS39
SEED LUBE/PAINT40
HITCH PARTS42
PLOW BOLTS44
PRECISION FARMING
46
REMAN49
SHOP PRODUCTS50
INDEX52
EARTH METAL®
PROVEN. PREFERRED. POWERFUL.
Not all sweeps and disk blades are created equal. The stronger, sharper and
longer-wearing they are, the fewer headaches in the field—and the fewer
unnecessary drains on your profit. Less breakage and more efficient seedbed
preparation and planting mean higher yields.
But what goes into a better sweep, opener or disk blade? The superior design
of New Holland Earth Metal® ground-engaging components is based on years
of in-depth research on tillage and planting agronomics—the science behind
maximum yields.
The resulting product is tougher, longer-lasting and significantly more durable
in the face of harsh field and crop conditions.
4
EA R T H ME TA L ®
SMART TIP
SAVE TIME, INCREASE
PRODUCTIVITY
Thanks to the superior strength
and flexibility of Earth Metal,
producers can avoid unnecessary
downtime—sometimes as much as
the half-day it takes to change out
wear parts. In addition to resisting
stress fractures that might otherwise
shatter conventional blades and
sweeps, Earth Metal disk blades
are measurably stronger and last
significantly longer.
EARTH METAL®
WHAT GOES INTO BETTER DISK BLADES? A LOT.
Here’s an inside look at the Earth Metal manufacturing and testing process.
1
2
3
The Earth Metal factory is one of the most advanced in the world; material-handling robots assure quality control
and consistency to give you the best product for your farm.
A 25-ton decoiler feeds steel through a leveler to a 2,000-ton press, which stamps out disk blanks. These blanks
then undergo further processing, including edging, notching, shaping and heat-treating. The cutting edges of the
disk blades are precision-machined using automated edge-turning equipment to create the optimal combination of
edge sharpness and strength.
After emerging from the heat-treatment process, disk blades are water quenched while firmly locked in their dies.
This allows for a shape that eliminates up to 90 percent of “disk wobble” and contributes to the overall toughness
and durability of the blades.
4
In the finishing process, disk blades undergo shot blasting to remove scale. They are then coated with high-gloss
enamel, which is baked to a smooth, hard finish that improves surface appearance and provides rust protection.
An inline oven draws each blade individually, which relieves internal stresses and improves ductility and quality.
5
The process doesn’t end after production. Brinell or Rockwell tests measure hardness to ensure the disk blade
is resistant to wear. The Ball test measures toughness by forcing a polished steel ball through the disk blade;
the length and shape of the resulting fractures are measures of the disk blade’s ability to resist cracking.
6
Disk blades are also tested for elasticity under load. This test applies pressure to the blade—the propensity
of the blade to return to its original shape afterward is a measure of its ability to resist impact.
WE’VE GOT A DISK BLADE FOR THAT.
The Earth Metal line is one of the largest in the industry—with disk blade options for nearly every equipment brand
and application. The Super Sharp™ edges on our latest disk blades, for example, are ideal for tough field conditions
and genetically modified crops.
See page 10 to learn more about choosing the right disk blade, and ask your dealer for a full selection.
EA RT H M E TA L ®
5
CULTIVATORS – SWEEPS
EARTH METAL® SWEEPS—MADE TO LAST
Available for nearly every cultivator and field condition, our patented, heavy-duty Earth Metal sweeps are made to
last—with an agronomic design for superior strength and optimum wear patterns. The high-strength alloy steel and
superior heat treatment of Earth Metal sweeps promote better scouring and longer wear life. Refer to our Field Cultivator
Application Chart to find the sweep that’s right for your application.
MAXXI-WIDTH™
MAXXI-POINT™
MAXXI-GRIP™
• Constant-width wing design for maximum performance
• Heavy-duty, 1-inch reinforced wear tip for improved
penetration and less draft
• Fits New Holland and most other makes of field cultivators
• Constant-width wing design
for maximum performance
• Heavy-duty extended
nose with ½-inch wear
point for increased wear
life and penetration
• 20 percent heavier than
Maxxi-Width sweep for
increased wear life
• Mounts to heavy-duty cast
adapter—easy to install, easy
to replace
• Neoprene gripper strips on the
side of the casting hold sweep
firmly in place
PART NO.
SIZE
PART NO.
1547095C2
4 ½" full
1547100C2
12 ½" full
1547096C2
6" full
1547101C2
7 ½" LWC
1547097C2
7 ½" full
1547102C2
7 ½" RWC
372560A1
7 3⁄10"
380434A1
8" full
1547098C2
9" full
1547103C2
9" LWC
372561A1
9 3⁄10"
380435A1
9" full
1547099C2
10 ½" full
1547104C2
9" RWC
372562A1
11 3⁄10"
380436A1
10 ½" full
400309A1
Adapter
6
C ULT I VAT O R S – SW E E PS
SIZE
PART NO.
SIZE
PART NO.
SIZE
CULTIVATORS – SWEEPS
FIELD CULTIVATOR APPLICATION CHART
MAKE/MODEL
Earth Metal heavy-duty
HOLE
SIZE
HOLE
CENTERS
STEM
ANGLE
⁄8"
1 ¾"
47°
Ford 208
3
⁄16"
1 ¾"
47°
Frontier
7
MAKE/MODEL
HOLE
SIZE
HOLE
CENTERS
STEM
ANGLE
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
Anderson
3
Baker
7
Bourgault
7
⁄16"
1 ¾"
47°
Glencoe, FC, MFC, FCSW
3
Brady (prior to '70 – '71)
3
⁄8"
1 ¾"
40°
Hesston
7
centers. Each series
Brady (after '70 – '71)
3
⁄8"
1 ¾"
40°
Hiniker
7
has a ⁄16-inch bolt
Bush Hog
3
⁄8"
1 ¾"
47°
Kent
7
⁄16"
1 ¾"
47°
hole to accommodate
Caulkins
3
⁄8"
1 ¾"
47°
Kewanee
3
⁄8"
1 ¾"
47°
cultivators with
CASE, FC, FCM, FCSW
3
⁄8"
1 ¾"
47°
Krause
3
Case IH and IH
7
⁄16"
1 ¾"
47°
Landoll
7
C.C.I.L.
3
⁄8"
1 ¾"
47°
Cockshutt 285, 485
3
Crustbuster
7
Deere 1000 Series
3
Deere 960
7
part number 810220C1
Deere CCA, CC10, CC20
3
7
( ⁄16-inch head and
Degelman 3000 Series
7
⁄16"
⁄8-inch shaft).
DMI
7
⁄16"
Ezee-On
Flexi-Coil 200, 400
7
Maxxi-Width™ and
Maxxi-Point™ sweeps
have 1¾-inch hole
7
7
⁄16-inch holes.
To accommodate
field cultivators with
3
⁄8-inch bolt holes,
use adapter bolt,
3
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
Massey Ferguson 160
3
⁄8"
1 ¾"
47°
3
⁄8"
1 ¾"
47°
Moline FT200
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
Morris L240, L320
3
⁄8"
1 ¾"
47°
⁄8"
5
1 ⁄8"
43°
Oliver 285,385,485
3
⁄16"
1 ¾"
47°
Rhino/Athens
7
⁄8"
1 ¾"
47°
Sunflower
7
1 ¾"
47°
Taylor
3
1 ¾"
47°
Wil-Rich
7
½"
1 ¾"
47°
Win Power 1500
7
⁄16"
1 ¾"
47°
White Farm Equipment
3
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄8"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄16"
1 ¾"
47°
⁄8"
1 ¾"
47°
MAXXI-POINT PLUS™
MAXXI-GRIP ADAPTER
•S
ame outstanding design
and manufacturing features
as the Maxxi-Point sweeps
•M
ounts to heavy-duty cast
adapter—easy to install,
easy to replace
PART NO. 400309A1 (SINGLE)
PART NO. 400309A1E (BULK PACK)
PART NO. B96705NH
(FOUR ADAPTERS WITH HARDWARE)
PART NO.
PART NO. B96705NH
SIZE
87460413
7 3⁄10"
87460414
9 3⁄10"
400309A1
Adapter
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
PART NO. 400309A1
CULTI VATORS – SWE E P S
7
CULTIVATORS
NON-EARTH METAL® MISCELLANEOUS SWEEPS
ALL-PURPOSE SWEEPS
PART NO.
SIZE
479005R2
6"
THICKNESS
TYPE
ANGLE
HOLES
HOLE SPACING
3
⁄16"
Full
57°
3
1"
8"
3
479006R2
⁄16"
Full
57°
3
1"
479009R2
8"
3
⁄16"
LH
57°
3
1"
479010R2
8"
3
⁄16"
RH
57°
3
1"
479007R2
10"
3
⁄16"
Full
57°
3
1"
479011R2
10"
3
⁄16"
LH
57°
3
1"
479012R2
10"
3
⁄16"
RH
57°
3
1"
479008R2
12"
3
⁄16"
Full
57°
3
1"
UNIVERSAL ECONOMY SWEEPS
PART NO.
SIZE
THICKNESS
ANGLE
HOLES
HOLE SPACING
6083BA
4"
¼"
55°
3
2 ¼"
BOLT SIZE
7
6078BB
6"
¼"
55°
3
2 ¼"
7
6079BC
8"
¼"
55°
3
2 ¼"
7
6080BC
10"
¼"
55°
3
2 ¼"
7
6081BC
12"
¼"
55°
3
2 ¼"
7
⁄16"
⁄16"
⁄16"
⁄16"
⁄16"
FIELD CULTIVATOR SWEEPS
8
PART NO.
SIZE
THICKNESS
ANGLE
HOLES
HOLE SPACING
87589793
9"
¼"
47°
2
1 ¾"
7
4497
11"
¼"
47°
2
1 ¾"
7
5786
11"
¼"
47°
2
1 ¾"
7
4498
12"
¼"
47°
2
1 ¾"
7
C ULT I VAT O R S
BOLT SIZE
⁄16"
⁄16"
⁄16"
⁄16"
CULTIVATORS
DANISH TINE SWEEPS
•¼
-inch thickness
PART NO.
SIZE
1547180C1
2 ½" full
1547181C1
4 ½" full
1547182C1
7" full
1547183C1
9" full
811191C1
1 ⁄8" reversible
3
POLY SHANK PROTECTORS – WHITE AND SILVER
Prevent residue build-up and protect against wear with New Holland poly shank
protectors. The non-stick poly surface allows the shank and attached shovel to
glide through soil and resists friction when cultivating and digging.
PART NO. (WHITE)
PART NO. (SILVER)
DESCRIPTION
73342628
73342629
1 ½" x 9" shank protector - package of 100
73342634
73342635
1 ½" x 9" shank protector - package of 25
73342630
73342631
1 ¾" x 9" shank protector - package of 100
73342636
73342637
1 ¾" x 9" shank protector - package of 25
73342632
73342633
2" x 12" shank protector - package of 100
73342638
73342639
2" x 12" shank protector - package of 25
CULT I VAT ORS
9
DISK HARROW – DISK BLADES
DISK BLADE SELECTION TOOL NOW AVAILABLE
™
WITH MY SHED MOBILE APP
Enter diameter, thickness and bolt size to find the best blade for your application.
Visit Partstore.Agriculture.NewHolland.com to download the My Shed mobile app.
STEPS TO SELECTING THE RIGHT BLADE
SMART TIP
STEP 1
TOUGH CROP RESIDUE?
GO SUPER SHARP
You must first identify the size of the disk blade you need.
For illustrative purposes, we will assume that you’re looking
for a 20-inch x 4.5-millimeter-thick disk blade.
With edges up to five times sharper
than conventional blades, our
Super Sharp™ edge blades are
designed to process and size
residue of the toughest BT genetic
crops. They also stand up under
rocky conditions, without chipping
or cracking, thanks to superior
Earth Metal alloy steel. Be sure
to use Kevlar gloves to install
your Super Sharp edge blades,
part number 87299086.
STEP 2
The size and shape of the center hole depends on the
arbor bolt size. As an example, let’s say you’re looking
for the disk blade size listed above with a 1 ½-inch
round arbor bolt.
STEP 3
Finally, you need to decide if you are looking for
a solid blade or a notched blade. In this case,
we’ll assume it’s a solid blade.
STEP 4
The following pages contain charts to help
you identify the proper blades based upon the
dimensional preferences identified in steps one
through three. If you are fitting disk blades to a
New Holland machine, you will need to refer to the
chart titled “Crimp Centered Disk Blades” on page 14.
If you are looking for full concave disk blades to fit
any other make and model, you need to refer to the
“Full Concavity Disk Blades” chart on page 13.
EXAMPLE
Based on the above example, you would choose part number 87618056. Need some extra
tilling power? Go with our Super Sharp™ edge notched blades, part number 87618057.
BLADE SIZE
DIA
(IN)
THICKNESS
(MM)
20
4.5
10
ARBOR BOLT SIZE
⁄8"
SQ.
7
1"
SQ.
1" 1-1⁄8" 1-1⁄8" 1-¼" 1-½" 1-½" 1-5⁄8" 1-¾" 1-¾"
RD. SQ. RD. SQ. SQ. RD. RD. SQ. RD.
D IS K H A R R O W – DIS K BLADE S
•
•
CNH PART NO.
2" 2-¼"
RD. SQ.
HOLE
STYLE
SUPER SHARP
SOLID
SUPER SHARP
NOTCHED
SR4
87618056
87618057
DISK BLADE CENTER HOLE REFERENCE GUIDE
HOLE
SIZE
CLOVERLEAF
OR SQUARE (CL)
ROUND (R)
FITS
ARBOR BOLT
HOLE
SIZE
FITS
ARBOR BOLT
HOLE
SIZE
FITS
ARBOR BOLT
1" square
CL1
7
⁄8" square
SR1
7
⁄8" square
SQ1
CL2
1" square
SR2
1" square
SQ1.5 1 ¼" square
CL3
1 1⁄8" square
SR3
1 1⁄8" square
CL4
1 ¼" square
CL5
1 ½" square
CL6
1 ¾" square
SQUARE
ROUND (SR)
SR4
1 ¼" square
SQ2
2 3⁄8" square
SQUARE (SQ)
SR4.5 1 ½" square
SR5
1 ½" square
SR6
1 ¾" square
SR7
2 ¼" square
R1
1" round
R2
1 1⁄8" round
R3
1 ¼" round
DS1
7
R4
1 ½" round
DS2
1" square
R5
1 ¾" round
DS3
1 1⁄8" square
R6
2" round
DS4
1 ½" square
R6.5
2 ¼" round
R7
2 ½" round
DUAL
SQUARE (DS)
⁄8" square
THICKNESS CONVERSION CHARTS FOR DISK BLADES:
GAUGE/INCH TO METRIC
GAUGE
INCH
MM
INCH
14
0.083
2
0.079
13
0.095
2.5
0.098
12
0.109
3
0.118
11
0.120
3.5
0.138
1
⁄8
0.125
4
0.157
10
0.134
4.5
0.177
9
0.148
5
0.197
8
0.165
6.5
0.256
7
0.180
8
0.315
6
0.203
10
0.394
¼
0.250
12
0.472
16
0.630
⁄16
0.312
1
⁄8
0.375
½
0.500
⁄8
0.625
5
5
DI SK HA RROW – DI SK BL A DE S
11
DISK BLADE CENTER HOLE REFERENCE GUIDE DISKS & RIPPERS
DISK
MANUFACTURER
MODEL/APPLICATION
BOLT SIZE
Allis Chalmers
2100 and 2300 series
1 ½" square
Amco
WOD, WTD
1 1⁄8" square
WOE
1 3⁄8" round
DISK
MANUFACTURER
John Deere
(continued)
Kent
MODEL/APPLICATION
BOLT SIZE
2650, 2651
1 ¾" square
2700
2 ¼" square
510, 512 ripper
1 1⁄8" square
WOF, WOJ, WTF, WTJ, F-15
1 ½" square
48
1" square
Discovator, 6112D, 6118D,
6323D, 6327D
1 ½" round
62
1 1⁄8" square
7333D, 6540D, 7550D
1 ½" round
126, 131
1 ½" square
Kewanee
800 and 1000 series
1 1⁄8" square
4500
1 ½" square
Krause
B900, B1000
1 ⁄8" square
3000H
1 ½" square
Brent
Brent CPC
1 ¾" round
1465, 1470, 1740, 1769,
1 ¾" round
3200 series
1952, 1956, 1960, 1970, 1968,
1 ½" round
1969, 1979, 1965, 1966, 1976
Brillion
Land Commander
1 ½" square
Burch
Kwik Set, 209
1 1⁄8" square
208BW
1 ½" round
Tru-Cut
7
145, 146 reg
1 ¼" square
146 HD
1 ½" square
346
2 ¼" round
245
1 ¼" or 1 ½" square
Athens
Blanton
Bush Hog
1
Ford
Hesston
Glencoe
IH/Case IH
John Deere
12
4995, 5800, 7300, 7400, 8200,
8300, 1498, 1499, 1580, 1912, 1 ½" round
1915, 1918
⁄8" square
1440, 1424, 1432, 1436, 1438,
1 1⁄8" square
1444 rolling bedder
Dunham-Lehr
1901, 1904, 1907, 1922, 1925,
1928, 1921, 1924, 1927, 1959, 1 ½" round
1963, 1973
Landoll
1480
1 ½" round or
1 ¾" round
1900, 1950, 2100, 2200,
2400, 3100 series
1 ½" round
2700 series
2 ½" round
Till-All
1 ¼" square
Weatherproofer ripper
1 ½" round
1422
1" or 1 ⁄8" square
1437
1 ⁄8" or 1 ½" square
M&W
Earthmaster (on a gang)
1 ½" square
1445, 1450
1 1⁄8" or 1 ¼" square
30, 40, 270
1 ½" square
GC
1 1⁄8" square
Massey
Ferguson
21
1" square
34
1 ½" round
25, 39
1" round
201, 202, 204
1" round
120, 220, 233, 213
1 1⁄8" square
219, 236
1 ½" square
52, 72
1 1⁄8" round
220, 222, 223, 240, 241
1 ⁄8" square
520, 620, 820
1 ¼" square
221
15
243
1 ½" round
Miller
Series 1 and series 2
1 ¾" round
2410
1 ¾" round
New Holland
OD100, OD200, TD100, TD200
1 ¾" round
2420, 2440
1 1⁄8" square
OD300
2" round
Soil finisher
1 ½" round
127, 131, 137, 167, 177, 187
1 ½" square
Yield Builder ripper
1 ½" round
Flex 90
1 1⁄8" square
122, 132, 350, 370, 470, 475,
480, 485, 490
Flex 90B
1 ¼" square
1 ⁄8" square
355
1 ¾" round
500, 501, 596, 610, 770
1 ½" square
555
2" round
630
1 ½" round
1210, 1230
1 ½" round
780
1 ¾" square
100, 110, 200, 210, 220, 230,
310, 637
1 1⁄8" square
115
1 1⁄8" round
105
1" round
1635, 1640, 2620, 2621
1 ½" square
215, 225, 425, 215, 235,
4000, 1630
1 ½" round
BWA, BWF, 525
1 ¼" square
1
1
1
⁄16" round
1
Rhino
Schafer
Sunflower
1211, 1231, 1233, 1300, 1320,
1 ¾" round
1330, 1321, 1331, 1430, 1440
White
1431, 1434, 1435, 1441, 1444,
1541, 1544, 4211, 6010, 6030, 1 ¾" round
H3, H4
250, 251, 252, 253, 254, 255,
1 1⁄8" square
256, 263, 264, 265, 271, 272
273, 274
1 ½" round
281
1 ½" square
FULL CONCAVITY DISK BLADES FOR ALL MAKES
BLADE SIZE
DIA.
(IN)
ARBOR BOLT SIZE
THICKNESS ⁄8"
SQ.
(MM)
7
16
3
16
3
16
3
18
3
18
3.5
18
3.5
18
4
18
4.5
20
4.5
20
4.5
20
4.5
20
4.5
22
4.5
22
5
22
5
22
5
22
5
22
5
22
6.5
22
6.5
24
5
24
5
24
5
24
5
24
6.5
24
6.5
24
6.5
24
6.5
24
8
26.5
6
26.5
6
26.5
6.5
26.5
6.5
26.5
6.5
26.5
6.5
26.5
8
26.5
8
28.5
6
28.5
6.5
28.5
8
32.5
10
1" 1 1⁄8" 1 ¼" 1 ½" 1 ¾" 2 3⁄8"
SQ. SQ SQ SQ SQ SQ
•
1"
RD
•
•
CNH PART NO.
1 1⁄8" 1 ¼" 1 ½" 1 5⁄8" 1 ¾" 2"
RD RD RD RD RD RD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS2
963879R2
CL3
121913A1
STANDARD
EDGE NOTCHED
SUPER
SHARP SOLID
SUPER SHARP
NOTCHED
DS3
87618050
87618051
SR4
87618052
SR1
87618053
DS3
87618054
87618055
SR4
87618056
87618057
CL2
MAG411D7988*
CL2
MAG411D5921*
CL3
121914A1
DS2
963880R2
CL3
87618058
SQ2
87618059
87618060
SR4
87618068
87618069
SR5
87618064
87618065
SR4.5
87618070
87618071
DS3
87618066
87618067
CL3
73342886
SR4
87618074
87618075
SR4
956702R4
SR5
604858R3
DS3
644011R5
SR6
998827R1
SR5
998865R2
SR4
790-1000
SQ2
963862R2
963863R2
SQ1
407293R2
407428R2
2804227R2
998866R3
•
•
SR5
CL4
87585198
87585199
•
•
SR5
87585200
87585201
•
•
•
•
•
•
R6
31332R2
CL4
407298R3
SR5
407434R4
CL4
•
•
•
•
•
•
STANDARD
EDGE SOLID
SR5
•
•
HOLE
STYLE
•
•
407431R4
407429R3
SR6
31357R2
31356R2
SR5
2804228R3
87429148
SQ1.5
87585810
87585811
SQ1.5
407300R3
958243R4
SQ1.5
339388A2
SQ1.5
339389A2
998861R2
*NOT EARTH METAL
13
CRIMP CENTER DISK BLADES
BLADE SIZE
ARBOR BOLT SIZE
DIA. THICKNESS
(MM)
(IN)
⁄8"
SQ.
16
3
•
16
3
16
3.5
16
4.5
18
3.5
18
4
18
4
18
4.5
18
5
20
4
20
4.5
20
4.5
20
5
20
5
20
5
20
6.5
20
5
22
4.5
22
4.5
22
4.5
22
5
22
5
22
5
22
5
22
5
22
6.5
22
6.5
22
6.5
24
5
24
6.5
24.3
5
24.3
6.5
26.5
6
26.5
6.5
26.5
8
28.5
6
28.5
6.5
28.5
8
28.8
8
30
8
32.5
8
14
7
1"
SQ.
1 1⁄8"
SQ.
1¼
SQ.
1 ½"
SQ.
1 ¾"
SQ.
CNH PART NO.
1"
RD.
1 1⁄8"
RD.
1 ¼"
RD.
1 ½"
RD.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SR4
87618083
SR4
87442974
SR4
87442980
SR4
87442981
SR3
87618084
87618085
SR4
87442981
87442982
SR3
87618086
SR4
87442986
SR4
87442983
SR4
87442985
CL5
87442998
SR4
87618094
87442984
87618088
CL5
87442999
•
SR3
87618095
SR4
87442996
SR4
87442993
SR3
87618089
•
•
CL5
87443000
SR4
87442995
SR3
87618093
CL3
•
543437R1
SR4
543438R1
181605A1
CL5
549986R2
CL5
87585196
87585197
CL5
58934C3
58917C3
CL5
28336R3
28345R3
CL5
87585202
87585203
CL5
27601R3
27600R3
CL5
31224R3
31225R3
CL6
60276C3
CL6
60278C2
CL6
87442997
87443003
CL5
•
•
•
87442979
87442992
•
87618082
87618087
•
•
•
•
•
•
•
•
•
87442973
31018R1
87442991
•
•
651197R1
SR3
•
•
•
•
31022R1
SR4
•
•
•
SUPER SHARP
NOTCHED
•
•
•
SUPER SHARP
SOLID
SR3
•
•
•
•
STANDARD
EDGE NOTCHED
DS2
•
•
84192889
SR1
•
•
SR1
SR3
•
•
STANDARD
EDGE SOLID
SR3
•
•
HOLE
STYLE
130868A2
60279C3
87443004
87618090
87442994
87612754
FLAT CENTER DISK BLADES
PART NO.
DIA.
(IN)
THICKNESS
(MM)
CENTER HOLE
DIA. (IN)
NO. OF
HOLES
BOLT CIRCLE
(INCHES/MM)
443623A1
14
2.5
2½
4
101.6
Standard
2½
4
127
Standard
4
EDGE
84180366
18.1
3
443629A1
18.1
6.5
5
139.7
Standard
443630A1
18.1
3
1¾
4
127
Notched
84380555
18.1
3
2½
4
127
Standard
84380560
18.1
3
2½
4
127
Notched
87443007
20.3
5
4
5
139.7
Super sharp
87443008
20.3
6.5
4
5
139.7
Super sharp
87443009
20.3
6.5
4
5
139.7
Super sharp notched
87443010
22.3
6.5
4
5
139.7
Super sharp
THREE-SIDED BLADES
PART NO.
DIA. (IN)
THICKNESS (MM)
HOLE STYLE
ARBOR BOLT SIZE
87401019
20
5
CL5
1 ½" Sq
87415788
20
5
SR4
1 ¼" Sq.
1 ½" Rd.
PART NO. 87401019
EDGE CARE™ PLUS:
RESTORES EARTH METAL® TO
FACTORY-APPROVED SHARPNESS
• Sharpen blades on the gang or sharpen individual, hub-mounted blades
• Simple design allows quick and easy setup
• Cold-sharpening technology extends disk blade life without sacrificing
blade diameter, ductility or hardness
• Extra sharpening wheel included
EDGE CARE PLUS
PART NO. 73341805
50 PERCENT IMPROVED SHARPENING TIME (2 TO 3 MINUTES PER DISK BLADE)
15
DISK HARROW – DISK BEARINGS
NEW BLADES? TIME FOR NEW BEARINGS.
When you invest in new blades—particularly our stronger, sharper
and longer-wearing Earth Metal® blades—you’ll want new bearings
as well. The following pages showcase your New Holland dealer’s
extensive line of disk harrow bearings, sorted by manufacturer.
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Allis Chalmers
DC211TT3
1 ½ sq.
W211PP3
K7 disk
10272
DS208TT5
1 1⁄8 sq.
W208PPB5
WTD5, WTD6, LFD2, LFDB2 disks
10333
DS208TT8
1 1⁄8 sq.
W208PPB8
WTD10, WTD3, WTD4 disks
11052
DC210TT2
1 ⁄16 rd.
W210PP2
Disk harrows with 1 15⁄16"-axle
11071
DC211TT3
1 ½ sq.
W211PP3
516, 517, 518, F15 disk harrows
11078
DS210TT4
1 1⁄8 sq.
W210PP4
11079
DS208TT6
1 sq.
W208PPB6
LFBD2, LFB2, LTB2
11503
DC211TTR4
1 ½ sq.
GW211PP4
11504
DC214TTR3
2.688 rd.
GW214PP3
Disk harrows with 2.688"-axle
G10218
DC214TTR2
2 ¾ rd.
GW214PP2
WTF2, WOJ10, WOF10 disks
G10333
DS208TTR8
1 1⁄8 sq.
GW208PPB8
13 ½ pulverizing disk
G10446
DC210TTR4
1 1⁄8 sq.
GW210PP4
G10771
DS210TTR2
1 15⁄16 rd.
GW210PPB2
DSG90MSA
G10906
DS211TTR3
1 ½ sq.
GW211PPB3
Disk harrows with 1 ½"-axle
DSG100MSA
1 1⁄8 sq.
GW208PPB5
AMCO
G10272
15
G11071
DC211TTR3
1 ½ sq.
GW211PP3
WOF3, WOF5, WOF6, WOJ3, WOJ4, offset disks
G11078
DC210TTR4
1 ⁄8 sq.
GW210PP4
RB1, 2, 3, 4, 5, 6, WOD2, 341, 342, 343, 344, disk harrows
DC208TT5
1 1⁄8 sq.
W208PP5
Ridger
DS208TT5
1 ⁄8 sq.
W208PPB5
Ridger
1 1⁄8 sq.
GW208PPB5
DS208TT6
1 sq.
W208PPB6
DC211TT3
1 ½ sq.
W211PP3
Levee plow, 1st series
DC211TTR2
2 3⁄16 rd.
GW211PP2
All Case IH disk harrows
DC211TTR3
1 ½ sq.
GW211PP3
DS211TT6
1 ½ sq.
W211PPB6
Levee plow, 2nd series
DS211TTR3
1 ½ sq.
GW211PPB3
Disk harrows, new ground disks
DC208TT5
1 1⁄8 sq.
W208PP5
Bedder
1
DS80MS
DS90MS
DSG80MSA
Athens
1
Bingham
GA15
16
D IS K H A R R O W – DIS K BE ARINGS
DS80MS
DS100MS
DSG100MSA
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Blanton
1023
DS208TT12
1 1⁄8 sq.
W208PPB12
Square axle disks
7129
DC208TT5
1 ⁄8 sq.
W208PP5
Disk harrows
BC1
DC208TT8
1 1⁄8 sq.
W208PP8
7
⁄8 sq.
W208PPB11
Square axle disks
1 ¾ rd.
GW211PPB3
Front gang. Early Riser CPC and Earthquake with 4-bolt flange
DSG100MSA
DS209TT2
1.7717 rd.
W209PPB2
Rear gang. Early Riser CPC and Earthquake with 4-bolt flange
DS85MS
FD211RE
1 ¾ rd.
DHU1-3/4S211
Rear gang. Late CPC and Earthquake with 4-bolt flange
2J516
DS208TT5
1 1⁄8 sq.
W208PPB5
DS80MS
3J131
DS211TT3
1 ½ sq.
W211PPB3
DS100MS
9C16
DC208TT8
1 1⁄8 sq.
W208PP8
FD211RM
1 ½ sq.
DHU1-3/4S211
Land Commander I and II disk gangs
DS210TT2
1 15⁄16 rd.
W210PPB2
EZ, EZ-A, EZ-B, 145 disks. Kwik set, hippers, ridgers
DS90MS
7
⁄8 sq.
W208PPB13
Harrow
DS80MS
L512B
1
Brent
DS211TTR13
Brillion
Burch
201A56
DS208TT13
203214
DS211TT3
1 ½ sq.
W211PPB3
Offset disk
DS100MS
204-82
DS211TT6
1 ½ sq.
W211PPB6
Super Tandem built in 1973 and after
DS100MS
208-12
DS209TTR2
1 ¾ sq.
GW109PPB2
78672A
DS211TTR3
1 ½ sq.
GW211PPB3
Offset disks, Super Tandem
9554A
DC208TT5
1 1⁄8 sq.
W208PP5
Ridger, 8 row
J9373
DS208TT5
1 1⁄8 sq.
W208PPB5
Ridger, E-Z set E-2GO, Early Riser
DS80MS
1100082475
DS208TT2A
1 ½ rd.
W208PPB2
Disk harrows with 1 ½" axle
DS80MS
11142416
DS208TT12A
1 1⁄8 sq.
W208PPB19
Disk harrows with 1 1⁄8" axle
14-6-244
DC211TTR2
2 3⁄16 rd.
GW211PP2
Disk harrow with 2 3⁄16" axle
14-36-183
DC208TTR17
1 1⁄8 sq.
GW208PP17
1424, 1426, 1432, 1436, 1438, 1439, 1444, with 1 1⁄8" gang bolt
14-22-63
DS208TT6
1 sq.
W208PPB6
Disk harrows with 1"-axle
14-24-26
DS208TT12
1 1⁄8 sq.
W208PPB12
14-24-63
DC208TTR17
1 1⁄8 sq.
GW208PP17
1422, 1423 disks with 1"-gang bolt
DSG85MSA
DSG100MSA
Bush Hog
DS80MS
14-4-5
DS209TT2
1.7717 rd.
W209PPB2
1432, 1436 disks
DS85MS
14-5-109
DS210TT2
1 15⁄16 rd.
W210PPB2
145
DS90MS
14-6-430
DC211TTR3
1 ½ sq.
GW211PP3
145, 146, 246, 1435, 1437 with 1 ½"-gang bolt
16-11-176/7950006
DC208TT5
1 ⁄8 sq.
W208PP5
Bedder and ridger
DS208TT5
1 1⁄8 sq.
W208PPB5
1 1⁄8 axle models
1
Caldwell
DS80MS
DI SK HA RROW – DI SK B E A RI N GS
17
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Calkins
5449031
DS209TTR5
1 ¼ sq.
GW209PPB5
DSG85MSA
270061503
DC214TTR3
2.688 rd.
GW214PP3
H747139
DC208TT5
1 1⁄8 sq.
W208PP5
Trencher boom end sprockets
H747303
DC208TT10
1 ½ rd.
W208PP10
TF300 trencher boom end sprockets
H747394
DC211TT2
2.188 rd.
W211PP2
Trencher boom end sprockets
H747410
DS209TT2
1.7717 rd.
W209PPB2
CASE Davis 700 chain drive
H747444
DC211TT3
1 ½ sq.
W211PP3
CASE, CASE Davis trenchers
T14116
DC208TT2
1 sq.
W208K2-E9003
T15820
DS208TT6
1 sq.
W208PPB6
T16288
DS208TT5
1 ⁄8 sq.
W208PPB5
T25486
DS208TT8
1 1⁄8 sq.
W208PPB8
630210R91
T28503
DS208TT12
1 1⁄8 sq.
W208PPB12
T34178
DS209TT6
1.535 rd.
W209PPB6
B, BW, WB series disks
T29920*
T51610
DS211TTR3
1 ½ sq.
GW211PPB3
K23, K23A, G59 disks (sperical O.D.)
DSG100MSA
T51653
DC211TTR3
1 ½ sq.
GW211PP3
E30, G109, G110, G119, K23, K23A, disk harrows
T53781
DS210TTR2
1 ⁄16 rd.
GW210PPB2
F21, F21H disk harrows
DSG90MSA
T54897
DS210TTR5R
1.785 rd.
GW210PPB5
Dot B, 25, 28, and 31 disk harrows
DSG90MSA
T56688
DC211TTR4
1 ½ sq.
GW211PP4
K23B disk harrows
T57559
DS211TTR2
2 3⁄16 rd.
GW211PPB2
DSG100MSA
1.7717 rd.
W209PPB2
DS85MS
CASE
1
15
Small ridger
DS85MS
DS80MS
DS80MS
DS80MS
Case IH and International Harvester
1251062C91
DS209TT2
ST491A
ST627A
1 ¾ rd.
DS211TT4
2.19 rd.
500 disks
2 ⁄16 rd.
FD211RBA
500, 501, 596, 700, 770, MRX690, RMX370, RMX790
DC208TT5
1 1⁄8 sq.
W208PP5
Trencher
DS208TT5
1 1⁄8 sq.
W208PPB5
DS211TT6
1 ½ sq.
W211PPB6
Levi, Levi-Dyke plow
DC211TT3
1 ½ sq.
W211PP3
K7 disk
430478
DS209TT2
1.7717 rd.
W209PPB
Disk harrows
430796
DS208TT7
1 ⁄16 rd.
W208PP7
70583939
DS211TTR3
1 ½ sq.
GW211PPB3
ST740B
3
DS100MS
Chas Machine
Chattanooga
DS80MS
DS100MS
Deutz-Allis
18
3
DS85MS
DS80MS
2600 disk
DSG100MSA
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
DC210TT2
1 15⁄16 rd.
W210PP2
1 1⁄8-axle series
DC211TT3
1 ½ sq.
W211PP3
1 ½-axle series
DS209TTR4
1.535 rd.
GW209PPB4
DS208TT12
1 1⁄8 sq.
W208PPB12
Disk harrows (wide O.R.)
DS208TT5
1 1⁄8 sq.
W208PPB5
Disk harrows
261750
DS208TT5
1 1⁄8 sq.
W208PPB5
266740
DS208TT12
1 1⁄8 sq.
W208PPB12
DS214TTR3
2.312 rd.
GW214PPB3
11504
DC214TTR3
2.688 rd.
GW214PP3
10771
DS210TT2
1 ⁄16 rd.
W210PPB2
1A64318
FD209RB
1 ½ rd.
DHU1-1/2R209
1R41009
DS208TT5
1 1⁄8 sq.
W208PPB5
310072
DS209TT2
1.7717 rd.
W209PPB2
Disk harrows
DS85MS
340103
DS209TT4
1.535 rd.
W209PPB4
Disk harrows
DS85MS
7377-1
DS211TT3
1 ½ sq.
W211PPB3
216 and 100 beet harvest
DS100MS
EP5403
DC211TTR4
1 ½ sq.
GW211PP4
EP6576
DS209TTR4
1.535 rd.
GW209PPB4
G10771
DS210TTR2
1 ⁄16 rd.
GW210PPB2
G11078
DC210TTR4
1 1⁄8 sq.
GW210PP4
15148
DC208TT10
1 ½ rd.
W208PP10
15617
DS208TT2A
1 ½ rd.
W208PPB2
Disk harrows
DS80MS
113903
DS209TT2
1.7717 rd.
W209PPB2
204, 210, 224, 230 disks
DS85MS
177849
DC210TT2
1 15⁄16 rd.
W210PP2
7200460
DS209TTR2
1 ¾ rd.
GW209PPB2
230, 201, 202, E, J, L disk harrows
DSG85MSA
MULCB112SG
DS211TT3
1 ½ sq.
W211PPB3
236 cutting disks
DS100MS
MULCBB112
DC211TT3
1 ½ sq.
W211PP3
219, 223 cutting disks
NDAS4508BJ
DS208TT5
1 1⁄8 sq.
W208PPB5
SBP238481B
DS208TTR8
1 ⁄8 sq.
GW208PPB8
241, 242M 243M 246 disk harrows
DSG80MSA
SFL2042
DS211TTR13
1 ¾ rd.
GW211PPB13
251 disk harrows
DSG100MSA
Domries
K85
DMI
21842400
Dunham
GK260
DS80MS
Eversman
DS80MS
Ezee On
15
15
Disk harrows
DS90MS
Disk harrows
DS80MS
Disk harrows
FMC
Ford
1
DI SK HA RROW – DI SK BE A RI N GS
19
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Forest City
DC208TT5
1 1⁄8 sq.
W208PP5
Ridgers
DS210TT2
1 15⁄16 rd.
W210PPB2
3-pt. vineyard disks
YB8400
DS209TTR4
1.535 rd.
GW209PPB4
Yield builder disk gangs and baskets
YB8500
FD209RB
1 ½ rd.
DHU1-1/2R209
Yield builder disk gangs with riveted flange
822-208C
FD209RB
1 ½ rd.
DHU1-1/2R209
Ultra-till disk gangs, turbo-chopper baskets
822-209C
FD209RK
1 ¼ sq.
DHU1-1/4S209
Turbo-till tolling spike harrows
FD211RE
1 ¾ rd.
DHU1-3/4S211
4360A, 5300A, 6360A, 7225A, 7300A, 9225A
DS211TTR3
1 ½ sq.
GW211PP3
Disk harrows
DS208TT12
1 1⁄8 sq.
W208PPB12
Disk harrows
700700613
FD209RB
1 ½ rd.
DHU1-1/2R209
2540 soil saver
700710152
DS208TT6
1 sq.
W208PPB6
Disk harrows
DC208TT5
1 1⁄8 sq.
W208PP5
Disk harrows
DS211TTR2
2.19 rd.
DS208TT12
1 1⁄8 sq.
W208PPB12
Wheel disks
1 1⁄8 sq.
GW208PPB5
100, 110 disks
GANDM
DS90MS
Glencoe
Great Plains
Greenline
DSG100MSA
Hardee
Hesston
DS80MS
Hester
Hiniker
Coulter chisels
DSG100MSA
IMCO
John Deere
A20175
A20649
DS209TTR10
1 ¾ rd.
GW209PPB11
210, 220, 230 disks
AA14878
DC208TT8
1 1⁄8 sq.
W208PP8
101 chisel plows, WDC, 23, 2FK, F871, F901, F902, F984, bedders
AK32778
DC211TT2
2.188 rd.
W211PP2
AK33797
DC210TT
1 ⁄16 rd.
W210PP10
80, 100, 225, 325, 414, 414A, 416, 1200, 1400, 2200, 2400, 3000, 4000
AK3892B
DC208TT2
1 sq.
W208K2-E9003
K, KBA, KBL, KBY, FW, RW, GR, GRL, disk harrows
AN240220
DS209TTR4
1.535 rd.
GW209PPB4
Disk harrows with 1.535"-axle
AN240221
DS211TTR13
1 ¾ rd.
GW211PPB13
Disk harrows with 1 ¾"-axle
DSG100MSA
AW20540
DS208TT2A
1 ½ rd.
W208PPB2
DS80MS
B34215
DS211TTR9
2 3⁄16 rd.
GW211PPB9
300, 310, 315, 330, 331, 335, 340, 350, 355, 360 disks; 1700,
1710, 1710
GZ379381
FD211RJA
1 15⁄16 rd.
DHU11516R211
400, 600, 610, 810 harrows
JD8656
DC211TTR2
2 3⁄16 rd.
GW211PP2
20
15
DSG85MSA
DSG100MSA
MANUFACTURER
PART NO.
JD8664
BORE
REFERENCES
APPLICATION
1 ¼ sq.
W209PPB5
9000 drill, 4400 combine
FLANGE
JD8664
DS209TT8A
1 ¼ sq.
W209PPB8
9000 drills, 4400 combines narrow O.R. brg.
JD9248
DS208TT5
1 ⁄8 sq.
W208PPB5
8500, F810H, F850H, 4, 5, and 6 tillers
JD9338
HPC100GP
1 sq.
206KKR6
450, 515, 520, 8000 grain drills, 50 series corn head
JD9350
DC208TT5
1 1⁄8 sq.
W208PP5
F871, F901, F984, F981, F982 bedders, 2700 BSN 1199
DS216TTR3
3 rd.
GW216PPB3
Disk harrows
05A51001
DS209TTR4
1.535 rd.
GW209PPB4
06A51001
DS208TT5
1 1⁄8 sq.
W208PP5
06A51-001
DC208TT5
1 1⁄8 sq.
W208PP5
Coulters
FD209RB
1 ½ rd.
DHU1-1/2R209
Disk harrows
B2055
DC211TT3
1 ½ sq.
W211PP3
Disk harrows with 1 ½" axle
B2151
DS208TTR8
1 1⁄8 sq.
GW208PPB8
100, 200, 170, 236, 300, 500, 600, 700, 900 series
DSG80MSA
B2246
DS210TTR4
1 1⁄8 sq.
GW210PPB4
1000, 1025, 1100, 1200 built before 1978
DSG90MSA
B2725
FD209RM
1 ⁄8 sq.
DHU1-1/8S209
1000 series built after 1978, 1025, 1030, 1100, 1175 series
B3587
FD211RM
1 ½ sq.
DHU1-3/4S211
1200 series
B3625
DC208TT10
1 ½ rd.
W208PP10
Disk harrows
B7778
DS209TTR2
1 ¾ rd.
GW209PPB2
209, 218 disk
B7980/G0052604
DS208TT5
1 1⁄8 sq.
W208PPB5
206, 400 disk
B8018
DC208TT5
1 ⁄8 sq.
W208PP5
Disk harrows with 1 ⁄8"-axle
G1046244
DC211TTR2
2 3⁄16 rd.
GW211PP2
G1046430
DC211TTR3
1 ½ sq.
GW211PP3
G1436183
DC208TTR17
1 ⁄8 sq.
GW208PP17
⁄8 sq.
W208PPB11
CFB disk harrows
DS208TT12
1 ⁄8 sq.
E208PPB12
KGB, WGH, EZB, MFB, disk harrows
1927-11-0
CDS209TTR
1.530 rd.
1900-1928, 2135-2166, 2200, 4900 series rock flex
2410-11-0
CDS211TTR
1 ¾ rd.
2400 series rock flex gang
40102/P-212-10-2
DS208TT7
1 3⁄16 rd.
W208PPB7
405-408
DS80MS
40-103/P350-10-1
DS210TT5
1 ¾ rd.
W210PPB5
Disk harrows
DS90MS
DS85MS
1
DSG85MSA
DS80MS
Johnson
275776
Kelly
DS80MS
Kent
FC0481
Kewanee
1
1
1
DSG85MSA
DS80MS
1
King Plows
BB-2
BB-2N
7
1
Krause
40-104/P412-10-2
DS209TT4
1.535 rd.
W209PPB4
408A-412, 610-629, 636-641, 900-908, 952-969, 1144-1156,
1401-1428, 1576-1592A, 1900-1928, 1952-1979, 2135-2166
40-105/612-10-2
DS209TTR4
1.535 rd.
GW209PPB4
900-908, 952-969, 1144-1156, 1401-1428
40-109/1934-12-0
FD209RB
1 ½ rd.
DHU1-1/2R209
1590, 1576-1592A, 1900-1928, 1952-1979, 2100-2166,
2190-2196, 2200-2244, 3948-3957, 3990-3994, 4900-4945,
4900A-4927A, 4950-4994
21
MANUFACTURER
PART NO.
BORE
FD211RE
40-119
DS209TTR6P
1.530 rd.
2410-11-0/40-173
DS211TTR23
1 ¾ rd.
GW211PPB21
1740-1767, 2400-2495, 5812-5824
FD209RK
1 ¼ sq.
DHU1-1/4S209
Disks with 1 ¼"-axle
DS209TTR4
1.535 rd.
GW209PPB4
Disk harrows
1065010003
DS209TTR4
1.535 rd.
GW209PPB4
1065010011
FD209RB
1 ½ rd.
DHU1-1/2R209
Weather proofer disk gang, harrows
DC211TTR21
1 ¾ rd.
GW211PP25
6230, 7410VT, 7430VT, 7431VT, 7450VT
DS211TTR23
1 ¾ rd.
GW211PPB21
8300 weather proofer
37-61-001
DS208TT12
1 1⁄8 sq.
W208PPB12
40-61-001
DS209TT7
1 ¼ sq.
W209PPB7
40-61-005
DS209TTR8
1 ¼ sq.
GW208PPB8
DC208TT10
1 ½ rd.
W208PP10
DS208TT12
1 1⁄8 sq.
W208PPB12
958, 959 disks
7
⁄8 sq.
W208PPB11
953, 956 disks
612-10-2
DHU1-3/4S211
APPLICATION
40-114
40-128
1 ¾ rd.
REFERENCES
FLANGE
1740-1767, 2400-2495, 4995, 5812-5824
Disk harrows
DSG100MSA
Landoll
140464
DSG100MSA
Lillisont
DSG85MSA
Lockwood
202112
Long
9-90092
9-90093
9-90155
DS209TT7
1 ¼ sq.
W209PPB7
Disk harrows
9-90241
DS211TT6
1 ½ sq.
W211PPB6
958, 959, 960, 1090, disk harrows
9-92088
DS211TTR3
1 ½ sq.
GW211PPB3
DC211TTR3E
1 ½ sq.
1905678M1
DC211TT3
1 ½ sq.
W2112PP3
447899M1
DS208TT12
1 1⁄8 sq.
W208PPB12
34MTD and 33 rev. disks
449432M1
DS211TTR3
1 ½ sq.
GW211PPB3
30, 40, 520, 620, 720 disk harrows
8311103M1 832634M2
DS208TT2A
1 ½ rd.
W208PPB2
36, 52, 75 disk harrows
DS80MS
831960M3
DS210TT2
1 15⁄16 rd.
W210PPB2
Plows
DS90MS
832540M1
DS211TT3
1 ½ sq.
W211PPB3
38 41 42 disk harrows
DS100MS
834367M1 1025130M1
DS208TT6
1 sq.
W208PPB6
21 disk harrows
835050M1
DS209TT2
1.7717 rd.
W209PPB2
28, 33, 34, 39, 68 disk harrows
1 ¼ sq.
W209PPB5
520, 620, 820 disk harrows
DS100MS
DSG100MSA
MANDW
2436003
Earthmaster
Massey Ferguson
842303M1
842323M1 1066086M1
DS209TTR5
1 ¼ sq.
GW209PPB5
520, 620, 820 disk harrows-relube bearings
843638M1 1905666M1
DS208TT5
1 ⁄8 sq.
W208PPB5
Disk harrows with 1 ⁄8" axle
22
1
1
DSG100MSA
DS85MS
DSG85MSA
DS80MS
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
McClesky
DS208TT12
1 1⁄8 sq.
RT2274
DS211TTR3
1 ½ sq.
RD4000 BSN 12946, RT2000, RT3000
RD4498
FD211RM
1 ½ sq.
RD4000 ASN 12947
DRB3826
FD209RB
1 ½ rd.
RD4000 rolling basket ASN 12756
6510628
DC211TT3
1 ½ sq.
W211PP3
6519831
DS208TT6
1 sq.
W208PPB6
DS209TTR8
1 ¼ sq.
GW209PPB8
Disks
DSG85MSA
4000044
DS211TTR13
1.785 rd.
GW211PPB13
Series I, II and heavy-duty disks with 24"- and 26"-disks
DSG100MSA
4000005
DS211TTR2
2.19 rd.
GW211PPB2
Early models with cast spools
DSG100MSA
DC208TT5
1 1⁄8 sq.
W208PP5
Hipper, ridger
20H2152
DS209TT2
1.7717 rd.
W209PPB2
Disk harrows
DS85MS
20H5836
DS208TTR6
1 sq.
GW208PPB6
KA disk harrows
DS80MS
DC208TT5
1 1⁄8 sq.
W208PP5
Ridger
7
⁄8 sq.
W208PPB11
W208PPB12
F228, L150 harrows
McFarlane
DSG100MSA
Melroe
DS80MS
Midland
15620
Miller
Minn-Moline
Multi-Purpose
42424
New Holland
276882
DS209TTR2
1 ¾ rd.
GW209PPB2
DSG85MSA
NDAS4508BJ
DS208TT5
1 1⁄8 sq.
W208PPB5
DS80MS
NDAS4508FF
DS208TT13
7
⁄8 sq.
W208PPB13
DS80MS
SPB238481B
DS208TTR8
1 ⁄8 sq.
GW208PPB8
DSG80MSA
237092B
DS208TT7
1 3⁄16 rd.
W208PPB7
241, 352, 250 series wheel disk harrows
238481B
DS208TTR5
1 ⁄8 sq.
GW208PPB8
263 disks
30-1005197
DS208TT5
1 3⁄16 rd.
W208PPB7
4404-P
DC211TT3
1 ½ sq.
W211PPB3
HD Levee plows, WO series disk harrows
744-P
DC208TT5
1 1⁄8 sq.
W208PPB5
LO, 175, 185, 200, 206, 250, 300, LT400, 720
DC208TT5
1 1⁄8 sq.
W208PP5
Disk harrows and ridger
1 ¼ sq.
W209PPB5
Do-all
1
Oliver
1
DS80MS
DSG80MSA
DS80MS
Pico
DSG85MSA
Piper
23
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Rome
DS208TT12
1 1⁄8 sq.
W208PPB12
7 ½ disk harrows
DS209TT2
1.7717 rd.
W209PPB2
Disk harrows
DS85MS
DS210TT2
1 15⁄16 rd.
W210PPB2
Disk harrows
DS90MS
3055
DC210TT2
1 15⁄16 rd.
W210PP2
3056
DS210TT2
1 15⁄16 rd.
W210PPB2
DS208TT12
1 1⁄8 sq.
W208PPB12
1186
DS208TT7
1 3⁄16 rd.
W208PPB7
1829
DS209TTR4
1.535 rd.
GW209PPB4
2042
DS211TTR13
1 ¾ rd.
GW211PPB13
24A5301
DS208TT5
1 ⁄8 sq.
W208PPB5
SN3091
DC211TTR21
1 ¾ rd.
GW211PP25
Disks 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331,
1431, 1432, 1433, 1434, 1435, 1441, 1442, 1443, 1444, 1541,
1543, 1544, 1550, 6630, 6631, disk rippers 4306, 4310, 4311,
4410, 4411, 4511, soil conditioners 7212, 7232, 7252
FK311007
FD209RK
1 ¼ sq.
DHU1-1/4S209
Disk harrows
YYB3471
FD209RM
1 1⁄8 sq.
DHU1-1/8S209
Disk harrows
DS208TT8
1 1⁄8 sq.
W208PPB8
DS209TTR5
1 ¼ sq.
GW209PPB5
Disk harrows
204147
DS208TT12
1 ⁄8 sq.
W208PPB12
Disk harrows light duty, 12 ½, 19, 21
204147G
DS208TT12A
1 1⁄8 sq.
W208PPB19
Disk harrows
204679
DS211TT6
Shaffer
Strathmore
DS90MS
Southern
Disk harrows, 13"-pulverizing disks
Sunflower
1
DS80MS
Disk harrows
DSG100MSA
DS80MS
Talbot
T151
DS80MS
Taylor
206090
1
1 ½ sq.
W211PPB6
Disk harows, extra heavy duty
7
⁄8 sq.
W208PPB11
Disk harrows
DSG85MSA
DS100MS
207022
DS211TTR3
1 ½ sq.
GW211PPB3
Disk harows, heavy duty
DSG100MSA
207359
DS208TTR8
1 1⁄8 sq.
GW208PPB8
200000, series disks
DSG80MSA
34392
DS208TT13
7
⁄8 sq.
W208PPB13
606793
DC208TT5
1 ⁄8 sq.
W208PP5
7906
DS208TT8
1 1⁄8 sq.
W208PPB8
101 ridgers
7992
DC208TT5
1 ⁄8 sq.
W208PP5
100, 101 ridger
15013
DS208TT12
1 1⁄8 sq.
W208PPB12
101 ridgers, 420, 425 disks
18300
DS211TT6
1 ½ sq.
W211PPB6
510, 515, 577, 532, 534, 535, 560, 600, 620, 621, 630
1
DS80MS
Towner
24
1
DS80MS
DS100MS
MANUFACTURER
PART NO.
BORE
REFERENCES
APPLICATION
FLANGE
Tufline
T60
DS208TT5
1 1⁄8 sq.
W208PPB5
Disk harrows, 1 1⁄8 gang bolts
T602
DS208TT12
1 ⁄8 sq.
W208PPB12
Disk harrows, 1 ⁄8
⁄8 sq.
W208PPB11
Disk harrows with 7⁄8 gang bolt
T603
1
7
DS80MS
1
Tye
552207
DS208TT6
1 sq.
W208PPB6
DS80MS
552209
DC208TT5
1 1⁄8 sq.
W208PP5
7044
DS209TT2
1.7717 rd.
W209PPB2
Disk harrows
91134
FD209RB
1 ½ rd.
DHU1-1/2R209
Disk harrows
481202
DC208TT5
1 1⁄8 sq.
W208PP5
Ridger and more
481213
DC211TTR3
1 ½ sq.
GW211PP3
481217
DC208TTR17
1 1⁄8 sq.
GW208PP17
1 1⁄8 sq.
GW208PPB5
Unverferth
DS85MS
Wanda MFG
White
213778B
237092B
DS208TT7
1 3⁄16 rd.
W208PPB7
251, 252, 253
237909B
DS211TTR3
1 ½ sq.
GW211PPB3
265, 281
238799B
FD209RM
1 1⁄8 sq.
DHU1-1/8S209
LATE 271, 272 disks
408808D
DC210TT2
1 ⁄16 rd.
W210PP2
W238481B
DS208TTR8
1 1⁄8 sq.
GW208PPB8
254, 255, 256
W238813
FD209RB
1 ½ rd.
DHU1-1/2R209
273, 274
24022
DS211TTR2
2 3⁄16 rd.
GW211PPB2
Disk harrows
24677
DC208TTR17
1 1⁄8 sq.
GW208PP17
25703
FD211RM
1 ½ sq.
DHU1-1/2S211
Disk harrows
30185
FD211RJA
1 15⁄16 rd.
DHU11516R211
Do-all seed bed, 1400, 1403
34002
DS209TT4
1.535 rd.
W209PPB4
15
DS80MS
DSG100MSA
DSG80MSA
Wilrich
DSG100MSA
DS85MS
25
VERTICAL TILLAGE – ALL-MAKES
ALL-MAKES EARTH METAL® COULTERS
17.2-INCH X 4.5-MM
PART NO. 87400930
Application: Salford RTS
• More aggressive 8-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
18-INCH X 4.5-MM
20-INCH X 4.5-MM
PART NO. 87400936
PART NO. 87400937
• Less aggressive 13-wave design stands up to rugged high-speed
• Less aggressive 13-wave design stands up to rugged high-speed
20-INCH X 4.5-MM
22-INCH X 4.5-MM
PART NO. 73340375
PART NO. 73341695
• Very aggressive 8-wave design stands up to rugged high-speed
• Very aggressive 8-wave design stands up to rugged high-speed
ALL-MAKES EARTH METAL COULTER
FOR LANDOLL VT PLUS
22-INCH X 6.5-MM
PART NO. 73341304
Application: Landoll Vertical Tillage
• Full concavity with R46 center (1.765"/1.826" diameter)
• Interchangeable with Landoll part no. 155617
SALFORD IS A REGISTERED TRADEMARK OF ©SALFORD FARM MACHINERY LTD.
LANDOLL IS A REGISTERED TRADEMARK OF ©LANDOLL CORPORATION
26
VE R T I C A L T I L L A GE – ALL-M AKE S
DEEP TILLAGE
POINTS AND SHOVELS
Choose from a complete line of shovels and points—manufactured from durable, high-carbon steel
and uniformly heat-treated for superior wear and toughness. They are available in single and double
points, heavy-duty spikes, chisels, twisted shovels and heavy-duty, double-pointed shovels.
REVERSIBLE POINTS FOR CHISEL PLOWS
LENGTH
SIZE WIDTH
THICKNESS
NO. OF HOLES
HOLE SPACING
2"
5
14"
⁄8"
2
1 ¾"
15 ¾"
4 ½"
5
⁄16"
2
15 ¾"
4 ½"
5
⁄16"
2
16"
2"
5
⁄8"
16 7⁄8"
2"
5
16 7⁄8"
2"
PART NO. B95242
BOLTS USED
STYLE
PART NO.
7
⁄16" no. 3 plow (2)
Chisel
5787
2 ¼" to 2 ½"
½" no. 3 plow (2)
Chisel
602595R3
2 ¼" to 2 ½"
½" no. 3 plow (2)
Chisel
602595R3N
2
2 ¼" to 2 ½"
7
⁄16" no. 3 plow (2)
Chisel
87589836
⁄8"
2
2 ½"
½" no. 3 plow (2)
Chisel
601986R1
5
⁄8"
2
2 ½"
½" no. 3 plow (2)
Spike
602594R1
18"
2"
1"
2
2 ½"
Hex ½"x 2 ¾"
Chisel
193054A1
19 ½"
2"
7
⁄8"
2
2 ½"
Hex ½" x 2 ½"
Chisel
B93368
19 ½"
2"
7
⁄8"
2
2 ½"
Hex ½" x 2 ½"
Chisel
B93369*
19 ½"
2"
7
⁄8"
2
2 ½"
Hex ½" x 2 ½"
Chisel
B93370
STYLE
PART NO.
TWISTED SHOVELS FOR CHISEL PLOWS
LENGTH
SIZE WIDTH
THICKNESS
21 ½"
3"
3
NO. OF HOLES
HOLE SPACING
BOLTS USED
21 ½"
3"
3
⁄8"
5
2 ¼" to 2 ½"
½" no. 3 plow (2)
L.H. twist, V point
594545R1
⁄8"
5
2 ¼" to 2 ½"
½" no. 3 plow (2)
R.H. twist, V point
594546R1
22"
3"
½"
5
2 ¼" to 2 ½"
½" no. 3 plow (2)
L.H. twist, V point
B95242
22"
3"
½"
5
2 ¼" to 2 ½"
½" no. 3 plow (2)
R.H. twist, V point
B95243
26 ½"
3 ½"
½"
4
2 ¼" to 2 ½"
½" no. 3 plow (2)
L.H. twist, slash point
812384C3
26 ½"
3 ½"
½"
4
2 ¼" to 2 ½"
½" no. 3 plow (2)
R.H. twist, slash point
812385C3
26 ½"
4"
½"
4
2 ¼" to 2 ½"
½" no. 3 plow (2)
L.H. twist, slash point
1995505C1
26 ½"
4"
½"
4
2 ¼" to 2 ½"
½" no. 3 plow (2)
R.H. twist, slash point
1995506C1
BOLTS USED
STYLE
PART NO.
REVERSIBLE SHOVELS FOR CULTIVATORS
LENGTH
SIZE WIDTH
7
THICKNESS
6 ⁄8"
2"
5
NO. OF HOLES
HOLE SPACING
⁄16"
2
1 ¾"
7
⁄16" no. 3 plow (2)
Chisel
594227R1**
⁄8" no. 3 plow (2)
Chisel
25332BA
⁄16" no. 3 plow (2)
Chisel
130384
⁄16" no. 3 plow (2)
Chisel
596623R1
⁄16" no. 3 plow (2)
Chisel
87546271
⁄16" special sweep (2)
Chisel
25702BA
⁄16" no. 3 plow (2)
Chisel
811799C3
⁄16" no. 3 plow (2)
Chisel-flared ends
86990834
⁄16" no. 3 plow (2)
Chisel
811889C1
⁄16" no. 3 plow (2)
Chisel
547188R2
8"
2"
3
⁄16"
1
-
3
10"
2 ½"
5
⁄16"
2
1 ¼"-2 ¼"
7
10 ⁄8"
1 ¾"
¼"
2
1 ¾"
7
11"
2"
3
⁄8"
2
1 ¾"
7
11"
2 ½"
¼"
2
2"-2 ¼"
11 ½"
2"
3
⁄8"
2
1 ¾"
7
11 ¾"
2"
3
⁄8"
2
1 ¾"
7
12"
2"
5
⁄16"
2
1 ¾"
7
14"
2"
5
⁄16"
2
1 ¾"
7
1
*USE ON HIGH CLEARANCE SHANKS ONLY.
**SINGLE POINT, NOT REVERSIBLE
7
DEE P T I L L A GE
27
CHISEL PLOW SWEEPS
CHISEL PLOW (WHEATLAND) SWEEPS APPLICATION CHART
MAKE/MODEL
New Holland chisel
plow sweeps have
2 ¼-inch – 2 ½-inch
combination hole
centers with ½-inch
bolt holes. To
accommodate
chisel plows with
⁄16 -inch bolt holes,
7
use adapter bolt,
part no. 594243R1
(bolt has ½-inch
head and 7⁄16 -inch
Allis Chalmers 22" – 32"
Anderson
Brady
CASE (some)
CASE (later models)
Case IH and IH
C.C.I.L. 1" thick shank
C.C.I.L. 1-¼" thick shank
Crown
DMI
Degelmen
Edwards
Flexi-Coil (2" x 1" shank)
Ford
Ford 131
Friggstad
Glencoe
Glencoe (high clearance)
Graham (high clearance)
Hiniker
Ingham
Jeoffery – 16"
Jeoffery – 22" – 32"
John Deere
John Deere (some)
Kewanee
HOLE
SIZE
HOLE
STEM
CENTERS ANGLE
⁄16"
⁄16"
7
⁄16"
½"
7
⁄16"
½"
7
⁄16"
½"
½"
½"
7
⁄16"
7
⁄16"
½"
½"
7
⁄16"
7
⁄16"
½"
7
⁄16"
7
⁄16"
½"
7
⁄16"
7
⁄16"
7
⁄16"
7
⁄16"
½"
7
⁄16"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ½"
2 ¼"
2 ½"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
7
7
43°
50°
50°
47°
50°
43°
50°
43°
50°
50°
50°
50°
50°
47°
50°
50°
47°
50°
50°
50°
43°
50°
43°
50°
47°
50°
shank).
MAKE/MODEL
HOLE
SIZE
Kilbery
Krause (low clearance)
Krause (high clearance)
Leon
Massey Harris
Massey “Trash King”
Mel-Cam
Mel-Cam Cultiweeder
Case IH – 5800 C.P.
Melroe (Clark)
Minneapolis Moline T600,
1500, 1800
Morris 220
Morris MP 912 and Magnum
Noble XR-20
Oliver 247, 248, 347 U.S.
Oliver 500, 3500
Robin-Nodwell
Rogin
Roll-O-Cone
Roll-O-Flex
Schulte 300
Sunflower
Versatile
Victory
Wil-Rich
Wil-Rich (early)
HOLE
STEM
CENTERS ANGLE
⁄16"
½"
7
⁄16"
½"
7
⁄16"
7
⁄16"
7
⁄16"
7
⁄16"
½"
½"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ½"
2 ¼"
50°
47°
50°
50°
43°
50°
50°
43°
50°
47°
7
⁄16"
2 ¼"
50°
⁄16"
½"
7
⁄16"
7
⁄16"
7
⁄16"
7
⁄16"
7
⁄16"
½"
7
⁄16"
½"
7
⁄16"
7
⁄16"
7
⁄16"
½"
7
⁄16"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ¼"
2 ½"
2 ½"
2 ¼"
43°
50°
50°
43°
43°
50°
50°
50°
50°
50°
50°
50°
50°
43°
43°
7
7
EARTH METAL CHISEL PLOW SWEEPS
Long-life, true-width, low-crown design; constant-width wing design maintains cutting width
longer that conventional wing sweeps; low-crown for reduced draft and excellent residue flow.
OLDER NEW HOLLAND MODELS AND SOME ALL-MAKES APPLICATIONS
SIZE
THICKNESS
PART NO.
HOLE SPACING
STEM ANGLE
CURRENT NEW HOLLAND MODELS AND MOST ALL-MAKES APPLICATIONS
SIZE
THICKNESS
PART NO.
HOLE SPACING
STEM ANGLE
8"
¼"
1547105C1
2 ¼" to 2 ½"
43°
8"
¼"
133765A1
2 ¼" to 2 ½"
50°
10"
¼"
1547106C1
2 ¼" to 2 ½"
43°
10"
¼"
133766A1
2 ¼" to 2 ½"
50°
12"
¼"
1547107C1
2 ¼" to 2 ½"
43°
12"
¼"
133767A1
2 ¼" to 2 ½"
50°
14"
¼"
1547108C1
2 ¼" to 2 ½"
43°
14"
¼"
133768A1
2 ¼" to 2 ½"
50°
16"
¼"
1547109C1
2 ¼" to 2 ½"
43°
16"
¼"
133769A1
2 ¼" to 2 ½"
50°
18"
¼"
1547110C1
2 ¼" to 2 ½"
43°
18"
¼"
133770A1
2 ¼" to 2 ½"
50°
12"
5
⁄16"
248517A1
2 ¼" to 2 ½"
43°
12"
5
⁄16"
248523A1
2 ¼" to 2 ½"
50°
14"
5
⁄16"
248518A1
2 ¼" to 2 ½"
43°
14"
5
⁄16"
248524A1
2 ¼" to 2 ½"
50°
16"
5
⁄16"
248519A1
2 ¼" to 2 ½"
43°
16"
5
⁄16"
248525A1
2 ¼" to 2 ½"
50°
18"
5
⁄16"
248520A1
2 ¼" to 2 ½"
43°
18"
5
⁄16"
248526A1
2 ¼" to 2 ½"
50°
28
C H I S E L P L O W S W E E PS
CHISEL PLOW SWEEPS
NON-EARTH METAL® MISCELLANEOUS CHISEL PLOW SWEEPS
SLIMWEDGE™ QUICK CHANGE CHISEL PLOW SWEEPS
PART NO.
SIZE
THICKNESS
ANGLE
87515418
2"
¼"
47°
21460
4"
¼"
47°
21461
5 ½"
¼"
47°
9026
9"
¼"
47°
8503
11"
¼"
47°
QUICK CHANGE ADAPTER
PART NO. 87625317
DART CHISEL PLOW SWEEPS
PART NO.
SIZE
THICKNESS
ANGLE
HOLES
HOLE SPACING
BOLT SIZE
87589822
14"
¼"
50°
2
2 ¼"
½"
4499
16"
¼"
50°
2
2 ¼"
½"
PENETRATOR DART CHISEL PLOW SWEEPS
PART NO.
SIZE
THICKNESS
ANGLE
HOLES
HOLE SPACING
BOLT SIZE
9686
12"
¼"
50°
2
2 ¼"
½"
5785
16"
¼"
50°
2
2 ¼"
½"
294957A1
22"
¼"
43°
2
2 ½"
½"
CHI SEL PLOW SWE E P S
29
COULTERS
EARTH METAL® COULTERS
Your New Holland dealer offers a full line of fluted, wavy, and straight coulters—allowing for implement customization
to match any trash-cutting requirements, and soil and speed conditions. What’s more, they’re made from durable
Earth Metal steel, making them the toughest coulters on the market.
COULTER
TYPE
8 wave deep
8 wave
13 wave
PART NO.
DIAMETER
(IN.)
THICKNESS
(MM)
CENTER HOLE
DIA. (IN)
NO. OF HOLES
BOLT CIRCLE
(INCHES/MM)
CUTTING WIDTH
(IN/MM)
TYPICAL USES
87400930
17.6
4.5
4
4
5.25 (133.4)
1.85 (47)
Rawson, Salford
73340375
20
4.5
4
4
5.25 (133.4)
2.17 (55)
Salford
73341695
22
5
4
5
5.25 (133.4)
2.3 (58)
Salford - NEW
130800A2
14.3
4
4
8
5 (127)
0.75 (19)
87400932
15.8
4
4
8
5 (127)
0.87 (22)
Kinze DG7803
Great Plains 820-019C
87400933
17.6
4
4
8
5 (127)
1 (26)
140447A2
18.1
4
4
8
5 (127)
1.06 (27)
87400934
14.3
4
4
8
5 (127)
0.63 (16)
87400935
15.8
4
4
8
5 (127)
0.63 (16)
Kinze GD9254
87298834
16
4
4
4
5.25 (133.4)
0.63 (16)
Kinze GD9255
129195A2
17.6
4
4
8
5 (127)
0.75 (19)
Great Plains 820-082C
87400941
17.6
4
3.78
6
5 (127)
0.78 (20)
87400936
18
4.5
4
8
5 (127)
0.75 (19)
Salford
Salford
87400937
20.4
4.5
4
8
5 (127)
0.87 (22)
443637A1
22
4.5
3.65
4
5 (127)
1.2 (30)
20 wave
87299953*
16
4
4
4
5.25 (133.4)
0.35(9)
25 wave
87413627
14.33
4
4
8
5 (127)
0.59 (15)
Bubble fluted
431542A1*
14.7
4
4
4
5.25 (133.4)
0.63 (16)
Yetter 2571-166
87413628
15.8
4
4
8
5 (127)
0.63 (16)
Krause 30-228
321165A2
17.6
4
4
8
5 (127)
0.63 (16)
Yetter 2571-179
140450A2
15.8
4
4
8
5 (127)
0.75 (19)
Kinze GD7804
COULTER TYPE
Straight
coulter disk
*NOT EARTH METAL
30
Kinze, Deere, Great Plains
C OU LT E R S
PART NO.
DIAMETER
(IN.)
THICKNESS
(MM)
CENTER HOLE
DIA. (IN)
NO. OF HOLES
BOLT CIRCLE
(INCHES/MM)
EDGE
87584040
15
5
1½
4
4 (101.1)
Straight
31399R1
17
4
1½
4
4.5 (114.3)
Rippled
1344516C1*
17
4
4
4
5.25 (133.4)
Rippled
TYPICAL USES
Yetter 2571-158
87299128
17
4.5
2
6
3.5 (88.9)
Notched
Kinze GD12676
SBP220303B*
18.1
4
4
4
5.25 (133.4)
Rippled
White/Ford Plows
141205C2
18.4
4
2.6
4
4.25 (108)
Straight
443627A1
20.4
4.5
3.6
4
5 (127)
Rippled
443626A1
20
4.5
3.6
4
5 (127)
Straight
28341R1
20.4
4.5
1½
4
4.5 (114.3)
Rippled
T54196
20.4
4.5
4
4
5.25 (133.4)
Rippled
White/Ford Plows
SBP219537B*
20
4.5
3.5
4
5.25 (133.4)
Rippled
White/Ford Plows
122567C1
22.6
4.5
1½
4
4.5 (114.3)
Rippled
443635A1
22.6
4.5
3.6
4
5 (127)
Straight
443638A1
24.8
4.5
3.6
4
5 (127)
Straight
COULTERS
COULTER TYPE
Straight coulter disk
(two sets of holes)
PART NO.
DIAMETER
(IN.)
THICKNESS
(MM)
CENTER HOLE
DIA. (IN)
87400939
16
4
4
140445A2
Straight coulter
(center hole only)
17
4
4
812362C1
20.4
4.5
1.25
28597R1
20.4
5
1.5
790-1002
20.4
6.5
1.5
NO. OF HOLES
BOLT CIRCLE (INCHES/MM)
4
5 (127)
8
5.25 (133.4)
4
5 (127)
8
5.25 (133.4)
-
C OULT E RS
31
MOLDBOARD PLOWS
PLOW THROUGH THE FIELD IN NO TIME
When it comes to seedbed preparation, we are the perfect partner—helping you find the right tool for your application.
We offer an extensive line of durable, high-performance moldboards, shares, shins and landsides that can cut your
plowing work in half. Only we have access to a full line of parts for plows that will keep you moving this harvest.
PLOW SHARES
MAKE
DESCRIPTION
MOLDBOARDS
PLOW
BOTTOM
MAKE
PART NO.
2- AND 3-BOLT SHARES
PLOW
BOTTOM
PART NO.
Ford
14" general purpose
R.H.
251440DS
Ford
16" general purpose R619 series
R.H.
251441DS
Ford
16" general purpose
R.H.
251442DS
R.H.
251443DS
R.H.
251444DS
Ford
12"
R.H.
251419DS
Ford
14"
R.H.
251421DS
Ford
16"
R.H.
251424DS
Ford
12"
R.H.
251422DS
Ford
14" heavy duty
R.H.
251423DS
Ford
18" general purpose
L.H.
251574DS
Ford
16" short, heavy curve
R.H.
251430DS
IH/Case IH
14"
R.H.
ST462313DS
Ford
16"
R.H.
251426DS
IH/Case IH
16"-18"
R.H.
ST462314HXDS
Ford
16" heavy curve
R.H.
251427DS
Massey Ferguson
16"-18" heavy duty
R.H.
ST660204DS
Ford
16" heavy duty
R.H.
251428DS
White/Oliver
16"
R.H.
251441DS
251565DS
White/Oliver
18"
R.H.
251444DS
White/Oliver
18"
R.H.
251443DS
Wil-Rich
16"- 18"
R.H.
ST14258
Ford
4-BOLT SHARES
Ford
16" heavy curve
L.H.
Ford
16" heavy duty
L.H.
251429DS
IH/Case IH
14" full upset
R.H.
ST463236R1
IH/Case IH
16" full upset
R.H.
ST463237R1
IH/Case IH
18" full upset
R.H.
ST463238R1
IH/Case IH
16" deep suck
R.H.
ST463253R1
IH/Case IH
18" deep suck
R.H.
ST463254R1
IH/Case IH
18" deep suck
L.H.
ST464591R1
IH/Case IH
16" full upset
R.H.
ST464582R1
IH/Case IH
18" full upset
R.H.
ST464583R1
16" ribbed
R.H.
STMF164RSDS
Melroe/Morris
18" for 806 RR Plows
R.H.
STP6526829
Melroe/Morris
16" for 806 RR Plows
R.H.
STP6526832
Massey Ferguson
White/Oliver
18" full curve
L.H.
251566DS
White/Oliver
16" full, heavy curve
R.H.
251427DS
White/Oliver
16" narrow, heavy curve
R.H.
251430DS
White/Oliver
16" hard-surfaced, heavy curve
R.H.
251427HDS
White/Oliver
16" heavy curve
R.H.
STRD16RDS
18"
R.H.
ST14255
Ford
18" heavy curve
R.H.
251431DS
Ford
18" short, heavy curve
R.H.
251434DS
Ford
Wil-Rich
5-BOLT SHARES
32
DESCRIPTION
18" heavy curve
L.H.
251566DS
White/Oliver
18" full, heavy curve
R.H.
251431DS
White/Oliver
18" narrow, heavy curve
R.H.
251434DS
White/Oliver
R.H.
251431HDS
White/Oliver
L.H.
251566HDS
M O L D B O A R D P L OW S
Ford
18" general purpose R619H series
18" general purpose R619 series
MOLDBOARD PLOWS
LANDSIDES / WEARPADS
MAKE
DESCRIPTION
PLOW SHINS
PLOW
BOTTOM
PART NO.
Ford
9 ⁄8" long
with 7⁄16" bolt
Front R.H.
251448DS
Ford
15 1⁄8" long
with 7⁄16" bolt
Rear R.H.
251449DS
Ford
14"-16"-18"
landside
Ford
Landside pad for
251578DS
3
IH/Case IH
4 ½" x 5⁄8" x 12 5⁄8"
landside
IH/Case IH
4 ½" x 6" landside
pad
Massey Ferguson 12"x 9⁄16" landside
Melroe/Morris
½" x 6" landside
pad for 806 RR plows
R.H.
PART NO.
R.H.
251435DS
Ford
14"-16"-18" general
purpose - R619 series
R.H.
251437DS
Ford
20" general purpose
R.H.
251439DS
251578DS
Ford
14"-16"-18" general
purpose - R619 series
L.H.
251571DS
251579DS
IH/Case IH
14"-16"-18"
R.H.
ST522325R12
R.H.
ST660020HXDS
Massey Ferguson 14" through 18"
R.H.
ST59057C1
ST59058C1
R.H.
ST475937HXDS
STP6526852
7 ½" x ½"
landside pad
251579DS
Wil-Rich
12" x 9⁄16" landside
ST14253
Wil-Rich
4 ½" x ½" x
6" landside pad
ST14256
White/Oliver
PLOW
BOTTOM
12" through 18" RH
251578DS
9
DESCRIPTION
Ford
⁄16" x 5" x 9⁄16"
flat landside
White/Oliver
MAKE
Melroe/Morris
16"-16"-18" for 806
RR Plows
R.H.
STP6522182
White/Oliver
12" through 18"
R.H.
251437DS
White/Oliver
12" through 18"
L.H.
251571DS
White/Oliver
20"
R.H.
251439DS
Wil-Rich
16"- 18"
R.H.
ST14257
TRASHBOARDS
DESCRIPTION
Case, Ford, Morris, Wil-Rich
PART NO. STHS151DS
PART NO.
STHS151DS
MOLDBOA RD P L OWS
33
PLANTERS – OPENERS
EARTH METAL® DISK OPENERS FOR ALL-MAKES
TRUST ONLY THE BEST FOR YOUR PLANTER OR DRILL
HEAVY-DUTY DISK OPENER ASSEMBLY FOR KINZE PLANTERS
PART NO. 428354A1
Application: Opener Disk Assembly – H.D.
Size: 381mm (15") x 3.5mm
Manufacturer Part No. Reference: Kinze GA8324
TOP SELLER TO FIT GREAT PLAINS MODELS
PART NO. 416443A1
Application: Opener Disk Assembly Flange
Size: 343mm (13-1/2") x 3mm
Manufacturer Part No. Reference: Great Plains 107-054S
HEAVY-DUTY DISK OPENER TO FIT
SUNFLOWER & AG CO
PART NO. ZSN18358
Application: Opener Disk Assembly
Size: 381mm (15") x 3.5mm
Manufacturer Part No. Reference: Sunflower/Agco SN9753N
34
P L A N T E R S – O P E N E RS
PLANTERS – OPENERS
EARTH METAL® OPENER ASSEMBLIES FOR NEW HOLLAND SP PLANTERS
PART NO.
APPLICATION
SIZE
84398745
Disk assembly
356mm (14") x 3.5mm
84398746
Disk assembly
356mm (14") x 3.5mm
84416318
Disk assembly
356mm (14") x 4.5mm
84416319
Disk assembly
356mm (14") x 4.5mm
141464C92
Fertilizer opener disk assembly
343mm (13 ½") x 2.5mm
1277891C91
Covering disk assembly
8" x 2mm
ALL-MAKES – EARTH METAL® OPENER ASSEMBLIES
PART NO.
APPLICATION
SIZE
MANUFACTURER PART NO. REFERENCE ONLY
416443A1
Opener disk assembly
343mm (13 ½") x 3mm
Lillison-Melrose 6603280/1
416010A1 (bearing kit 435483A1)
Opener disk blade only
381mm (15") x 3.5mm
Sunflower-Best 7176/DR800008
416015A1 (bearing kit 435483A1)
330mm (13") x 3mm
Marliss, Sukup, Best, M&W
416442A1/B1980615C1
Opener disk
343mm (13 ½") x 3mm
Tye-Uft 540-647/012
416015A1 (bearing kit 435483A1)
330mm (13") x 3mm
Marliss-Sukup-M&W 701010
416442A1/B1980615C1
343mm (13 ½") x 3mm
Krause 5250-484-OALH
410526A1
343mm (13 ½") x 3mm
5250-484-OARH
416442A1
Opener disk assembly L.H.
343mm (13 ½") x 3mm
Crustbuster 863597LH
416442A1
Opener disk assembly R.H.
343mm (13 ½") x 3mm
863597RH
B500276
Opener disk assembly lead
381mm (15") x 3mm
859090
416443A1
Opener disk blade only plain
343mm (13 ½") x 3mm
863597
435480A1
Bearing kit (2 bearings and bolts)
141464C92
Opener disk assembly Fert.
343mm (13 ½") x 3mm
John Deere AA27458
400580/401042
B500276
Opener disk assembly (AA20242)
381mm (15") x 3mm
AA37474
133480A1 (bearing kit 419594A1)
Opener disk – J.D. 750/1850
460mm (18 1⁄10") x 5mm
Deere N283804
428354A1
Opener disk assembly – H.D.
381mm (15") x 3.5mm
Kinze GA8324
B500276
381mm (15") x 3mm
GA2013
416443A1/B1980616C1
Opener disk assembly. New flange
343mm (13 ½") x 3mm
Great Plains 107-054S
ZSN18358
381mm (15") x 3.5mm
Sunflower/Agco SN9753N
84389196
Disk assembly
356mm (14") x 3.5mm
800-955 Case IH planters
84389195
Disk assembly
356mm (14") x 3.5mm
800-955 Case IH planters
1344911C3
366mm (14") x 2.5mm
5300, 5400, 5500 Case IH drills
603020R92
Grain drill opener disk assembly
14" x 3mm
5100, 5200, 6200, 6300, IH 10, 100, 510, 620
MINI HOPPER ENHANCEMENT KITS
PART NO. 47532784
PART NO. 47556260 (SPLIT ROW)
NEW
Application: SP580
• An easy-to-assemble, quick-attach snorkel that slows down
seeds to prevent clogging.
• Fills automatically for normal field operation and manually
for plot-planning
• Mini hopper enhancement kit tool sold separately (part no. 47532734)
PLA NTERS – OP E N E RS
35
AIR HOE DRILLS – STEALTH OPENERS
STEALTH® OPENERS
The Stealth opener is a modular system that adds versatility to your row seeding. A choice of tips
or attachments mount to the main body. Replaceable tips promote long-life and customization.
SINGLE SHOOT
Stealth openers use replaceable tips that work for both narrow-row and spread-row seeding styles.
DOUBLE SHOOT
PART NO. 87506290
Stealth double-shoot attachments allow one-pass placement of seed and fertilizer. Seed/fertilizer separation
prevents seedling damage.
KNIFE TIPS
SIDE BAND
•
•
•
•
•
Low soil disturbance
Very narrow spread of 7⁄8 to 1 inch
For use with any press wheel
Heavy-duty, gumbo or carbide tips
match soil condition.
PART NO.
•
•
•
Places seed 1 inch above and
1 inch beside the fertilizer
Wing forces soil into the fertilizer
trench to provide separation
from seed
Can be used with all press wheels
Available in standard or long-life
carbide
DESCRIPTION
Standard
Carbide
87506287
87505195
87506283
87506293
PART NO.
Standard
Carbide
Gumbo
87506407
22846
LH sideband
Standard
87506409
22847
RH sideband
SPREAD TIPS
PAIRED ROW
•
•
•
•
•
Designed for low-disturbance
seeding
Wider product spread allows more
fertilizer to be placed with the seed
Spread tips are available in
3-, 4- or 5-inch sizes
For use with press wheels that
match row widths
PART NO.
36
•
•
DESCRIPTION
Standard
Carbide
84193957
84193966
3-inch spread
84193961
84193981
4-inch spread
87506290
87563695
5-inch spread
AIR H O E D R I L L S – S TE ALTH OPE NE RS
DESCRIPTION
•
Seed is placed 1 inch above
and 1 to 2 ½ inches on both
sides of the fertilizer
3-inch size available in HS
format for heavy soils and
gumbo, and in LS format for
light soils and sandy loam
3-, 4- and 5-inch sizes
available in carbide for
extended wear that helps to maintain integrity of seedbed
over the full life of the opener; designed to force soil into
the fertilizer trench, providing separation from the seed
For use with press wheels that match row widths
PART NO.
DESCRIPTION
Standard
Carbide
87506291
87506295
87506292
N/A
3-inch paired row
3-inch paired row light soild
87506261
22848
4-inch paired row
87506294
22849
5-inch paired row
AIR HOE DRILLS – SEED METERING AND TRIPS
SEED METERS
NEW HOLLAND AIR CART METERING SYSTEMS ENSURE ACCURATE SEEDING, EVERY TIME.
What crops do you seed now? How will that change next year, or three years
from now? Whatever your plan, a range of meter roller designs provide you with
accurate metering and efficient operation. Meters accommodate products ranging
in size from the smallest forage seed to the largest bean—inoculated, treated or
not—plus a wide range of fertilizer applications.
SELECT FORM THESE ROLLER OPTIONS:
Extra Fine: for micronutrients
or very small seeds such as
alfalfa, grass, canola and grain
sorghum, at very low rates
Fine: for wheat, barley, oats,
flax, millet and moderate rates
of fertilizer
Coarse: for solid-seeding,
larger crops such as corn and
beans at high rates
Extra Coarse: for very
large, fragile seeds such as
peas and large beans, and
high rates of fertilizer
METER ROLLERS
PART NUMBER
# OF RUNS
EXTRA FINE
FINE
COARSE
EXTRA COARSE
2
GL-512S.1
GL-522S.1
GL-532S.1
GL-992SV1
3
GL-513S.1
GL-523S.1
GL-533S.1
GL-993SV1
4
GL-514S.1
GL-524S.1
GL-534S.1
GL-994SV1
5
GL-515S.1
GL-525S.1
GL-535S.1
GL-995SV1
6
GL-516S.1
GL-526S.1
GL-536S.1
GL-996SV1
7
GL-563SV1
GL527SV1
GL-537SV1
GL-997SV1
8
GL-518S.1
GL-528S.1
GL-538S.1
GL-998SV1
CHOOSE YOUR SHANK STYLES AND TRIPS
The rugged C-shank and trip design allow for use with a wide
range of opener styles. Choose 350-pound trips for most soil
types, or 550-pound trips for rugged conditions and double-shoot
applications. Mount an optional one-bar, ½-inch tine harrow behind
the rear shanks for added leveling and row closing.
TRIPS
PART NO.
DESCRIPTION
TP-351A
350-lb trip
87686090
550-lb trip
SHANKS
PART NO.
DESCRIPTION
87506241
50° no offset
87506243
50° - 2 ¼-inch-left offset
87506242
50° - 2 ¼-inch-right offset
87500716
50° - 3 1⁄8-inch-left offset
87500715
50° - 3 1⁄8-inch-right offset
87506280
47° - no offset
87506281
87506282
A I R HOE DRI LLS – SEED METERI NG A N D T RI P S
37
AIR HOE DRILLS
AIR SEEDER HOSES
Your New Holland dealer offers PVC, low-pressure hose,
sold by the foot, in sizes from 1 inch to 2.5 inches in diameter
for air seeder applications.
L.D. SWEEP OPTIONS
PART NO. 1032199
PART NO. 1032199N (ECONOMICAL IMPORT OPTION)
6-inch sweep
PART NO.
ID (INCHES)
COLOR
4726
1
Clear/white helix
86993485
1
Black
11-inch sweep
73342889
1
Black
412786A1
1.25
Clear
PART NO. 1033379
84346017
1.25
Black
73342890
1.25
Black
350447A1
1.5
Black
73358256
1.5
Clear
L.D. 13-inch hard-faced sweep
6401
1.75
Clear
PART NO. 87298811
86992281
1.75
Black
1018883
2
Clear/white helix
241305A1
2
Black
3680
2.5
Clear/white helix
86992286
2.5
Black
73342891
2.5
Black
1978963CX
2.5
Black/urethane lined, extended wear
HEADER STAND ELBOW
38
13-inch sweep
PART NO. 87298812
PART NO. 87298813
LOW DISTURBANCE
NH3 KNIVES
PART NO. 47433844 (L.H.)
PART NO. 47433845 (R.H.)
• Hard surfaced for extended acreage
FLAT-FACED PACKER TIRE
PART NO.
DESCRIPTION
GP-103
Standard elbow
GP-102
High abrasion elbow
AIR H O E D R I L L S
PART NO. 1027915
PART NO. 290719A1
• Preferred for its ability to leave
the field exceptionally smooth
• 6.5 inches x 15 inches
• Pack the entire width of the
ribbon or row
• Sustains minimal stubble
damage due to the thicker
rubber on the flat face and
the four-ply side
FOUR-PLY
PACKER WHEEL
PART NO. 47357837
Application:
P2070 precision hoe
• 4.8 inches x 8 inches,
smooth wheel
P2080/P2085 DISK DRILLS
SEED METERS
EARTH METAL® OPENER DISK
PART NO. 87488385
Application: P2080/P2085
•1
8 inches x 5 millimeters
PART NO.
DESCRIPTION
CROP TYPE
84389793
Extra-fine roller
Sorghum/milo, canola
84389792
Fine roller
Flax, sorghum/milo
84389771
Coarse roller
Barley, oats, rice, soybeans, wheat
SERVICE SPINDLE ASSEMBLIES
GAUGE WHEEL ASSEMBLIES
PART NO. 21618
Application: P2080/P2085
•4
inches x 16 millimeters
PART NO.
DESCRIPTION
84327548
Double castor and fixed rear wheel
GD-161A
Single castor
84472211
High-flotation double castor and rear wing
RAIN AND DEBRIS KITS
Our clear rain and debris kit protects seed meters from the
elements—shielding the meter area from rain, overspray during
power-washing, and tire spray during transport. It also keeps dirt
clods, crop residue, gravel and small stones from getting into the
meter rolls. Two rain and debris kits are required per disk drill.
PART NO.
DESCRIPTION
47446028
25- and 30-foot kit
47446031
40-foot kit
P2080/P2085 DI S K DRI L L S
39
SEED LUBE/PAINT
TALC/GRAPHITE SEED LUBRICANT
IronGard™ seed lubricant is available for any type of planter,
whether gravity or airflow. The proper use of seed lubricant
prevents bridging in the hopper and reduces wear on moving
parts in the seed meter.
SMART TIP
SEED LUBRICANT
PART NO.
DESCRIPTION
APPLICATIONS
73341461
1 lb. 100% graphite
All makes
73341462
8 lb. 100% graphite
All makes
73341463
1 lb. 80% talc, 20% graphite
All makes
73341464
8 lb. 80% talc, 20% graphite
All makes
407486R1
1 lb. 100% graphite, fine particle size
All makes
73340733
8 lb. 100% graphite, fine particle size
All makes
73340734
1 lb. 50% talc, 50% graphite, fine particle size
New Holland SP planters
73340370
8 lb. 50% talc, 50% graphite, fine particle size
New Holland SP planters
73340918
Dispensing cap
8 lb. container
NON-STICK GRAPHITE LUBRICANT
Spray, brush or roll non-stick graphite lubricants onto any metal or wood surface to
reduce sliding friction on chains and sprockets, hitches, overhead door tracks, winches,
and hinges. This lubricant also works for the seed drum seal wearing ring and marker
alternator of Cyclo planters, and as a surface conditioner on gravity boxes, hoppers,
chutes, moldboards, planters and markers, forage boxes and wagon beds.
PART NO.
APPLICATION
407408R1
14 oz. aerosol - No. 3
547596R1
1 qt. / .95 L - No. 1
1131916R1
1 gal. / 3.79 L - No. 1
TILCOAT
PENETRATING OIL
CHAIN AND CABLE LUBE
Tilcoat is a specialized, oil-based coating designed to protect
valuable field equipment during non-use periods.
• Formulated to release from tillage tools upon their insertion
and use in the ground
• Lead-free formula that dries to a non-toxic film and provides
short-term protection
• Fast scouring, resists rust and easy to apply
• Suggested applications include
tillage equipment, moldboards,
plow shares, disks, sweeps
and shovels
PART NO. B505502
12 oz. / 340 g
PART NO. B505500
12 oz. / 340 g
• Loosens rusted parts
• Prevents corrosion on tools
and other parts
• Dries out wet
engine parts
• Stops binding
and squeaks
• For use on construction
and agricultural equipment
• Helps protect against rust
and corrosion
• Fast penetrating action
• Reduces chain wear
and increase life of
chain and cables
• Resists hightemperature
breakdown
• Heavy viscosity
reduces throw-off
PART NO.
40
Graphite seed lubricant provides
lubrication for the seed delivery
and seed meter components.
For best coverage and
performance with bulk fill, apply
graphite seed lubricant either with
an applicator on the seed tender
or as the seed enters the tank.
Refer to the planter operator’s
manual for lubricant application
rates for new planter hoppers
and first fill. Also, set vacuum
only as high as necessary to hold
seeds to the seed disk; excessive
vacuum accelerates seed disk
and seed meter housing wear,
makes singulation more difficult,
and requires more oil flow and
power to operate the fan.
DESCRIPTION
1132221N
12 oz. / 340 g
991049R2
1 qt. / 946 ml
1131548R2
1 gal. / 3.78 L
SE E D L U B E / PA I N T
LIFEBLOODS
FOR ALL EQUIPMENT—
BOTH LEGACY AND NEW.
Simplify your shed with fluids for every application. New Holland
lifebloods are the only fluids tested and recommended for your
New Holland equipment by our expert engineers. New Holland
fluids assure longer service intervals, higher performance and
better-preserved machine equity. Don’t subject your equipment
to the risk of unknown fluids—choose New Holland lifebloods.
©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.
HITCH PARTS
BULL PULL™
Give the connection between your tractor and implement the attention it deserves with Bull Pull:
• Eliminates backlash for precise control
• Heavy-duty for heavy loads
A
K
D
B
G
• Easy to install
L
H J
• Increases the life of drawbars
F
C
• Superior construction means
E
more pulls for your money
PART NO.
87298942
73342896
73340374
73340677
Category
4
4
5
5
1 ½" or 2"
1 ½" or 2"
2 ¾"
2 ¾"
5 ½"
5 ½"
6 ⁄8"
6 5⁄8"
C= receiver width
4"
4"
4"
4"
D= draw pin to hole mtg
7"
7"
7 3⁄8"
6 5⁄8"
E= overall length
11"
11"
12"
12"
F= height (for drawbar strap)
2 ¾"
2 ¾"
3
3 ⁄8"
3 3⁄8"
1"
1"
1"
1 5⁄8" pin
H= bolt hole distance
2 ¼"
2 ¼"
2 ¼"
-
Number of bolt holes
2
3
2
1
J= receiver height
4 ½"
6 ¾"
4 ½"
4 ½"
K= hole center to back of receiver
1 ¼"
1 ¼"
1 ¼'
2"
2"
2"
3
2 ⁄8"
2 3⁄8"
31 lbs
37 lbs
35 lbs
35 lbs
A= draw pin size
B= ball housing diameter
G= bolt hole size
L= ball housing thickness
Weight
5
HARROW TEETH
Replacement harrow teeth (shown in quantities of one) for a variety of implement manufacturers; heat-treated point.
42
PART NO.
DESCRIPTION
SPC560216E
Full diamond, 7⁄16" thread
5
WIDTH
LENGTH
WEIGHT (LBS.)
⁄8" x 7⁄8"
8"
SPC560217E
Full diamond, ½" thread
5
0.6
⁄8" x ⁄8"
8"
0.6
SPC560218E
Full diamond, 7⁄16" thread
5
⁄8" x 7⁄8"
SPC560219E
Full diamond, ½" thread
5
8 ½"
0.6
⁄8" x 7⁄8"
8 ½"
SPC560220E
Full diamond with head
5
0.6
SPC560221E
Full diamond, no head
5
⁄8" x ⁄8"
8"
0.62
⁄8" x 7⁄8"
8"
0.58
SPC560231E
Square, no head
5
SPC560232E
Square with head
5
⁄8"
8"
0.85
SPC560234E
Square with head
5
⁄8"
10"
1.05
⁄8"
12"
1.25
SPC560236E
Square with head
5
SPC560240E
Square, no head
⁄8"
14"
1.45
¾"
8"
1.13
SPC560242E
Square, no head
¾"
9"
1.25
SPC560245E
Square with head
¾"
10"
1.45
SPC560247E
Square with head
¾"
11"
1.52
SPC560249E
Square with head
¾"
12"
1.8
SPC560251E
Square with head
¾"
14"
2.1
HI T C H PA R T S
7
7
FULL DIAMOND WITH HEAD
SQUARE, NO HEAD
FULL DIAMOND WITH THREAD
SQUARE WITH HEAD
FULL DIAMOND, NO HEAD
HITCH PARTS
HYDRAULIC CYLINDER DEPTH STOPS
Rustproof and lightweight stops are available for cylinder with shafts up to 2 ½ inches. Made from hardened,
high-density aluminum, these stops have an integral one-piece design that is easy to use and store. Our stops
are color coded to help with keeping things level from side to side.
SIZE
INDIVIDUAL
COLOR CODE
½ inch
350704A1
Red
5
⁄8 inch
350703A1
Orange
¾ inch
350706A1
Yellow
1 1⁄8 inch
350747A1
Black
1 ¼ inch
350702A1
Green
1 7⁄16 inch
350701A1
Blue
1 ½ inch
350705A1
Silver
1 ⁄8 inch
350746A1
Black
4 inch
350845A1
Silver
5
CYLINDER STROKE CONTROL SEGMENTS
Designed to control the stroke on air or hydraulic cylinders;
unique “Finger Tab” design on aluminum and steel models for
easier installation and removal; clamshell package
PART NO.
87299447
87299448
DESCRIPTION
87299450
87299451
SEGMENTS
PACAGE QTY.
¾", 1", 1 ¼", 1 ½"
1
87299447
Fits 1 ⁄8" and 1 ½" diameter shafts; aluminum; no finger tabs
87299448
Fits 1 ⁄8" and 1 ¼" diameter shafts; aluminum; no finger tabs
¾", 1", 1 ¼", 1 ½"
1
87299450
Fits 1 1⁄8", 1 ¼", 1 3⁄8" and 1 ½" diameter shafts; aluminum; finger tabs
¾", 1", 1 ¼", 1 ½"
1
87299451
Fits 1 ¾", 1 7⁄8" and 2" diameter shafts; aluminum; finger tabs
1", 1 ½", 2", 4"
1
3
1
HYDRAULIC HOSE ASSEMBLIES
WHEN THE PRESSURE IS OFF, WHO DO YOU TRUST?
When the loss of hydraulic pressure slows productivity, count on your
New Holland dealer. He understands the pressure of your business, and
stocks a wide range of OEM hose assemblies and bulk components.
HI TC H PA RT S
43
PLOW BOLTS
For convenience, the most popular plow bolts are available in packages that include bolts and serrated flange
nuts for field cultivator sweeps, chisel plow shovels, Danish tine sweeps and many other tillage applications.
WHY NEW HOLLAND PLOW BOLTS?
• Competitive pricing
• Hardware is coated in environmentally friendly trivalent
chromium, eliminating the health and environmental concerns
of previous hexavalent coatings
• Bolts are heat-treated to SAE J429 Grade-5 specifications
NO. 3 FLAT-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTS
⁄8 — 16
3
⁄16 — 14
7
½ — 13
PART NO.
LENGTH
SETS PER BOX
P2024481
1 ¼"
50
P2024483
1 ½"
50
P2024490
1 ¼"
50
P2024492
1 ½"
50
P2024494
1 ¾"
50
P2024496
2"
50
P2024498
2 ¼"
50
P2024500
2 ½"
50
P2024502
3"
25
P2024503
2"
50
P2024504
2 ¼"
50
P2024506
2 ½"
50
CONTOUR-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTS
⁄8 — 16
3
PART NO.
LENGTH
SETS PER BOX
P2024470
1 ½"
50
P2024472
5
1 ⁄8"
50
P2024474
1 ¾"
50
44
P L O W B O LT S
IN THE FIELD?
NOT A PROBLEM.
ORDERING PARTS ONLINE
COULDN’T BE EASIER.
Google Play™
for Android™
Apple® Store
for iPhone®
Storing your machine models and accessing parts is made easier with
My Shed and My Shed Mobile App 2.1. Our apps offer.
Machine Management: enter
serial number, hours and notes
Parts Manuals: access assembly
diagrams and create part pick lists
24/7 Dealer Connection: email
part pick lists to a dealer
Toolboxes: Disk Blade Selector,
Preservative Calculator, Oil/fluid Guide
and Battery Finder
Machine Info: product alerts and videos
MAKE THE SMART CHOICE AND REGISTER TODAY AT:
©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.
PRECISION FARMING
CHOOSE FROM
7 DIFFERENT
PATTERNS
COMPARISON GUIDE: EZ-GUIDE® 250, FM-750™, FM-1000™
AND INTELLIVIEW IV DISPLAYS
EZ-GUIDE 250
FM-750
FM-1000
INTELLIVIEW IV
4.3"
8.0"
12.1"
10.4"
Touchscreen
-
•
•
•
Video camera inputs
-
2
4
3
GPS receiver
1
1
2
1
GLONASS compatibility
-
•
•
•
CenterPoint™ RTK
<1" (2.5 cm) accuracy
-
•
•
•
CenterPoint™ VRS™
<1" (2.5 cm) accuracy
-
•
•
•
CenterPoint™ RTX ™
1.5" (3.8 cm) accuracy
-
•
•
•
OmniSTAR® HP/XP
2-4" (5-10 cm) accuracy
-
•
•
•
OmniSTAR® G2
-
•
•
•
RangePoint™ RTX ™
6" (15 cm) pass-to-pass
20" (50 cm) repeatable
-
•
•
•
SBAS (WAAS)
-
•
•
•
EZ-Steer ®
•
•
•
-
EZ-Pilot™
-
•
•
-
AutoPilot™
-
•
•
-
Implement control
-
-
•
-
Row guidance
-
-
•
•
FEATURES
Size of color screen
Headland
CORRECTION SERVICES
Pivot
A-B pattern
Identical curve
Multi headlands
PRODUCT COMPATIBILITY
A+ pattern
FreeForm™
46
P RE C I S I O N FA R MING
PRECISION FARMING
EZ-STEER®
ASSISTED-STEERING SYSTEM
The EZ-Steer assisted-steering system provides simple, portable,
hands-free farming for more than 1,200 vehicle models—old and
new. The EZ-Steer system turns the steering wheel by combining
a friction wheel and electric motor with guidance from an
EZ-Guide® 250, FM-750™ or FM-1000™ display, giving you efficient,
low-stress steering capabilities. It is ideal for broad-acre farming
applications that don’t require extremely accurate positions.
EZ-STEER SYSTEM FEATURES:
• Easy disengagement when you manually turn the steering
wheel for quick manual steering when desired
• The EZ-Steer system motor easily locks away from the
steering wheel when not in use
• Easy installation and transferability from vehicle to vehicle
EZ-PILOT™
The EZ-Pilot assisted steering system turns the
steering wheel for you with an electric motor
drive using GPS guidance from the FM-750™
display and FM-1000™ display. While the
EZ-Pilot system keeps you in line, you can
focus on many different tasks, such as sprayer or planter
performance, improving job quality and crop yields.
• T3™ enhances terrain
compensation technology
and immediately adjusts
vehicle steering to
compensate for rough terrain
or slopes
and hillsides
• Fast-reacting motor allows
system to quickly get the
vehicle in line and stay there
• Allows for FreeForm™ steering
• Better steering of vehicles
with more rigid power steering
systems, such as floaters
• Motor integrated into the
steering column provides
clear access to all instrument
panels without a decrease
in cab legroom
• Steering system can be
installed onto existing steering
wheels and used with
telescoping steering wheels
SMART TIP
ACCURACY:
BIG PAYBACK ON YOUR
TILLAGE INVESTMENT
Achieving lower operating costs is a
multifaceted challenge—but precision
farming can play a bigger part than
you may think. Accuracy during tillage
is often perceived as a lower priority
than when seeding or planting, but
it can still have a large impact on
your overall costs. Less tilling overlap
means less time in the field, which
means less wear and tear on your
machine and implement, and less
fuel usage. The ultimate result? You
guessed it: lower operating costs.
See below for some of the available
accuracy options, and see the chart
to the left for steering choices.
AUTOPILOT™ AUTOMATED
STEERING SYSTEM
The Autopilot™ automated steering system provides integrated,
high-accuracy steering in any field type—hands-free. The
Autopilot system automatically steers your vehicle—with
speeds up to 30 mph (40 kph)—for maximum precision and
increased productivity. It is ideal for the most demanding row
crop farming applications.
THE AUTOPILOT SYSTEM:
• Automatically steers your vehicle
• Integrates directly into your
vehicle’s hydraulics for
reduced clutter in cab
• Plugs in to many
guidance-ready vehicles,
minimizing the need for
additional equipment
CenterPoint™ RTX™
OmniSTAR® XP/G2
RangePoint™ RTX™
SBAS (WAAS)
1.5”
3-5”
6”
6-8”
PRECI SI ON FA RM I N G
47
HIGH QUALITY. LOW PRICE.
SMART VALUE.
From replacement engines to individual components, your New Holland dealer offers a wide range of
remanufacturedparts for your New Holland equipment. All parts are re-engineered to meet or exceed
OEM specificationand cost 20 to 40 percent less than new parts. And we support each of our parts with
an industry-leading warranty*. You’ll appreciate the value. Your equipment will appreciate the performance.
FOR A COMPLETE LIST OF REMANUFACTURED PARTS,
SEE YOUR LOCAL NEW HOLLAND DEALER OR VISIT
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM TODAY.
CMYK
CNH Industrial
New Corporate logo
0. 90. 100. 23
AW_CNHI_ Reman_CMYK.ai
AC
03 12 2013
CMYK
0. 0. 0. 100
* When installed by a New Holland dealer.
©2014 CNH Industrial America LLC. All rights reserved. New Holland is a registered trademark of CNH Industrial America LLC.
REMAN
WARRANTIES FOR NEW HOLLAND REMANUFACTURED PARTS
DEALER INSTALLED
WARRANTY PERIOD
NOT DEALER INSTALLED
Parts
Labor
Parts
Labor
6 months
Yes
Yes
Yes
No
Replacement engines
24 months
Yes
Yes
Yes
No
Long block engines
24 months
Yes
Yes
Yes
No
Short block engines
12 months
Yes
Yes
Yes
No
Cylinder heads
6 months
Yes
Yes
Yes
No
Connecting rods
6 months
Yes
Yes
Yes
No
Fuel injectors
12 months
Yes
Yes
Yes
No
Turbochargers
12 months
Yes
Yes
Yes
No
Fuel injection pumps
12 months
Yes
Yes
Yes
No
Clutches
12 months
Yes
Yes
Yes
No
Axles
12 months
Yes
Yes
Yes
No
Torque converters
12 months
Yes
Yes
Yes
No
Power shuttles
12 months
Yes
Yes
Yes
No
Power shifts
12 months
Yes
Yes
Yes
No
Manual transmission
12 months
Yes
Yes
Yes
No
Wobble boxes
12 months
Yes
Yes
Yes
No
Rotor drives
12 months
Yes
Yes
Yes
No
Alternators
12 months
Yes
Yes
Yes
No
Starters
12 months
Yes
Yes
Yes
No
Generators
12 months
Yes
Yes
Yes
No
All other electronics
12 months
Yes
Yes
Yes
No
Pumps
12 months
Yes
Yes
Yes
No
Motors
12 months
Yes
Yes
Yes
No
Cylinders
12 months
Yes
Yes
Yes
No
12 months
Yes
Yes
Yes
No
Remanufactured products not listed below
REMAN ENGINES/COMPONENTS
REMAN DRIVELINE
REMAN GEARBOXES
REMAN ELECTRICAL
REMAN HYDRAULICS
MISCELLANEOUS
A/C compressors
CMYK
CNH Industrial
0. 90. 100. 23
New Corporate logo
RE M A N
AW_CNHI_ Reman_CMYK.eps
AC
03 12 2013
CMYK
0. 0. 0. 100
49
SHOP PRODUCTS
NEW HOLLAND-BRANDED TOOLS
21-PIECE SOCKET SET
8-PIECE WRENCH SET
PART NO. SN40001
PART NO. SN70001
• Highly-polished chrome for
appearance and durability
• Made from high-grade
chrome vanadium steel
• Hardened for ultimate
strength and durability
• Lifetime replacement warranty
• 15-degree offset on box end
provides knuckle clearance
• Nickel chrome finish for durability
• Dual-pawl ratcheting box end
provides smooth operation
and maximum strength
80-PIECE FIELD SERVICE KIT
AIR IMPACT WRENCH
PART NO. SN99980
PART NO. SN17050
Kit includes:
• 32, 3⁄8-inch drive sockets
• 31, ½-inch drive sockets
• Two screwdrivers
• 15 combination wrenches
• Steel-nose case with lightweight
aluminum housing
•R
otary-action air motors—ball-bearing
mounted for balance, speed and power
• Pressure feed grease lubrication
• Five-position air speed regulator
• Convenient side bar forward/reverse
• Variable speed trigger—8,000 rpm
• 425 feet per pound max torque forward/reverse
• One-year warranty from date of purchase on parts and labor
45-PIECE BIT SET
PART NO. SN18001A
• Made from high-grade
chrome vanadium steel
• Nickel chrome finish
for durability
50
SH O P P R O D U C T S
SHOP PRODUCTS
GREASE
GR-9 MULTI-PURPOSE GREASE
MOLY GREASE GR-75
• Formulated for extreme pressure wheel-bearing and chassis applications
• Formulated with a lithium complex thickener, rust and oxidation
inhibitors, and extreme-pressure additives to provide exceptional
protection from wear and oxidation
• Fortified with molybdenum disulfide (moly) to provide
exceptional wear protection for slow-speed, severe-wear,
high-torque applications
• Perfect fit for areas like rockshafts, loader pins and bushings
HI-TEMP EP GREASE
SYNTHETIC GREASE GR-1000 SSL
• Formulated to withstand high-heat applications and still provide
outstanding wear-protection and load-carrying capabilities
• Excellent choice for high-speed bearing applications
• An NLGI No. 2 high-performance grease—combines a synthetic
base fluid with a calcium-sulfonate complex thickener
• Thickener system provides a high dropping point, while
heavy-duty additives provide optimum extreme-pressure
properties and excellent resistance to water wash, oxidation
and outstanding protection against rust and corrosion
• Excellent performance properties at
both high and low
temperatures
SOIL COMPACTION TESTER
PART NO. 73340410
• 24-inch, stainless steel rod with adjustable shock collar to
prevent damage to the gauge during transport or storage
• Easy-to-read, color-coded, stainless steel dial that is liquid-filled
to reduce shock
• Durable molded housing with rubber-grip handles
• Large and small tip included with convenient storage in tester housing
• Hanger hole with nail included for easy storage on wall or
above workbench
SPECIFICATIONS
Penetration depth
Up to 24 inches in 3-inch increments
Two tips included
– ½-inch tip for firm soil
– ¾-inch tip for soft soil
Green testing range (0-200 psi)
Good growing conditions
Yellow testing range (200-300 psi)
Fair growing conditions
Red testing range (300 psi and above)
Poor growing conditions
SHOP P RODUCT S
51
NOTES
NOTES
52
NO T E S
PART NUMBER INDEX
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
3680
38
73342629
9
87299448
43
87589793
8
4497
8
73342630
9
87299450
43
87589822
29
4498
8
73342631
9
87299451
43
87589836
27
4499
29
73342632
9
87299953
30
87686090
37
4726
38
73342633
9
87400930
26, 30
1027915N
38
5785
29
73342634
9
87400932
30
1032199N
38
5786
8
73342635
9
87400933
30
1033379N
38
5787
27
73342636
9
87400934
30
1131548R2
40
6401
38
73342637
9
87400935
30
1131916R1
40
8503
29
73342638
9
87400936
26, 30
1132221N
40
9026
29
73342639
9
87400937
26, 30
122567C1
30
9686
29
73342889
38
87400939
31
1277891C91
35
21460
29
73342890
38
87400941
30
129195A2
30
21461
29
73342891
38
87401019
15
130800A2
30
21618
39
73342896
42
87413627
30
133480A1
35
130384
27
73358256
38
87413628
30
133765A1
28
1018883
38
84180366
15
87415788
15
133766A1
28
1027915
38
84193957
36
87443007
15
133767A1
28
1032199
38
84193961
36
87443008
15
133768A1
28
1033379
38
84327548
39
87443009
15
133769A1
28
47357837
38
84346017
38
87443010
15
133770A1
28
47433844
38
84380555
15
87460413
6
1344516C1
30
47433845
38
84380560
15
87460414
6
1344911C3
35
47446028
39
84389195
35
87488385
39
140445A2
31
47446031
39
84389196
35
87500715
37
140450A2
30
47532734
34
84389771
39
87500716
37
141205C2
30
47532784
34
84389792
39
87506241
37
141464C92
35
47556260
34
84389793
39
87506242
37
1547095C2
6
73340370
40
84398745
35
87506243
37
1547096C2
6
73340374
42
84398746
35
87506261
36
1547097C2
6
73340375
26, 30
84416318
35
87506280
37
1547098C2
6
73340410
51
84416319
35
87506281
37
1547099C2
6
73340677
42
84472211
39
87506282
37
1547100C2
6
73340733
40
86990834
27
87506283
36
1547101C2
6
73340734
40
86992281
38
87506287
36
1547102C2
6
73340918
40
86992286
38
87506290
36
1547103C2
6
73341304
26
86993485
38
87506291
36
1547104C2
6
73341461
40
87298811
38
87506292
36
1547105C1
28
73341462
40
87298812
38
87506294
36
1547106C1
28
73341463
40
87298813
38
87506407
36
1547107C1
28
73341464
40
87298834
30
87506409
36
1547108C1
28
73341695
26, 30
87298942
42
87515418
29
1547109C1
28
73341805
15
87299128
30
87546271
27
1547110C1
28
73342628
9
87299447
43
87584040
30
1547180C1
9
PA RT NUMBE R I N DE X
53
PART NUMBER INDEX
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
PART NO.
PAGE NO.
1547181C1
9
251574DS
32
479010R2
8
1547182C1
9
251578DS
33
479011R2
8
1547183C1
9
251579DS
33
479012R2
8
193054A1
27
25332BA
27
547188R2
27
197511A1
29
25702BA
27
547596R1
40
1978963CX
38
28341R1
30
594227R1
27
DC211TT3
1995505C1
27
28597R1
31
594545R1
27
DC211TTR2
1995506C1
27
290719A1
38
594546R1
27
241305A1
38
294957A1
29
596623R1
27
248517A1
28
31399R1
30
601986R1
27
248518A1
28
321165A2
30
602594R1
27
DC211TTR3E
22
248519A1
28
350447A1
38
602595R3
27
DC211TTR4
16, 18, 19
248520A1
28
372560A1
6
602595R3N
27
DC214TTR2
16
248523A1
28
372561A1
6
603020R92
35
DC214TTR3
16, 18, 19
248524A1
28
372562A1
6
6078BB
8
248525A1
28
380434A1
7
6079BC
8
DS208TT12
17, 18, 19,
20, 21, 22,
23, 24, 25
248526A1
28
380435A1
7
6080BC
8
251419DS
32
380436A1
7
6081BC
8
251421DS
32
400309A1
6, 7
6083BA
8
251422DS
32
407408R1
40
790-1002
31
251423DS
32
407486R1
40
811191C1
9
251424DS
32
410526A1
35
811799C3
27
251426DS
32
412786A1
38
811889C1
27
251427DS
32
416010A1
35
812362C1
31
251427HDS
32
416015A1
35
812384C3
27
251428DS
32
416442A1
34, 35
812385C3
251429DS
32
416442A1
35
251430DS
32
416443A1
251431DS
32
251431HDS
32
251434DS
DC210TT
20
DC210TT2
16, 19,
24, 25
DC210TTR4
16, 19
DC211TT2
18, 20
16, 18, 19,
21, 22, 23
16, 17,
20, 21
DC211TTR21
22, 24
DC211TTR3
16, 17,
18, 21, 25
DS208TT12A
17, 24
DS208TT13
17, 23, 24
DS208TT2A
17, 19,
20, 22
DS208TT5
16, 17, 18,
19, 21, 22,
23, 24, 25
DS208TT6
16, 17,
18, 20, 22,
23, 25
27
DS208TT7
18, 21,
23, 24, 25
991049R2
40
DS208TT8
16, 18, 24
34, 35
B500276
35
DS208TTR5
23
428354A1
34, 35
B505500
40
DS208TTR6
23
431542A1
30
B505502
40
DS208TTR8
32
435480A1
35
B93368
27
16, 19, 21,
23, 24, 25
251435DS
33
443623A1
15
B93369
27
DS209TT2
251437DS
33
443626A1
30
B93370
27
17, 18,
19, 22, 23,
24, 25
251439DS
33
443627A1
30
B95242
27
DS209TT4
19, 21, 25
251440DS
32
443629A1
15
B95243
27
DS209TT6
18
251441DS
32
443630A1
15
CDS209TTR
21
DS209TT7
22
251442DS
32
443635A1
30
CDS211TTR
21
DS209TT8A
21
251443DS
32
443637A1
30
DC208TT10
18, 19,
21, 22
DS209TTR10
DC208TT2
18
DC208TT5
16, 17, 18,
20, 21, 23,
24, 25
DS209TTR4
DS209TTR5
18, 22, 24
17, 20
DS209TTR6P
22
17, 21, 25
DS209TTR8
22, 23
251448DS
33
443638A1
30
251449DS
33
479005R2
8
251565DS
32
479006R2
8
251566DS
32
479007R2
8
251566HDS
32
479008R2
8
DC208TT8
251571DS
33
479009R2
8
DC208TTR17
54
PA R T N U M B E R I NDE X
DS209TTR2
20
17, 19,
21, 23
19, 20,
21, 22, 24
PART NUMBER INDEX
PART NO.
PAGE NO.
DS210TT2
17, 19,
20, 22, 24
DS210TT4
16
DS210TT5
21
DS210TTR2
16, 18, 19
DS210TTR4
21
DS210TTR5R
18
PART NO.
PAGE NO.
44
ST660204DS
32
SBP219537B
30
STHS151DS
32
SBP220303B
30
STMF164RSDS
32
SN17050
50
STP6522182
33
SN18001A
50
STP6526829
32
SN40001
50
STP6526832
32
SN70001
50
STP6526852
33
SN99980
50
STRD16RDS
32
SPC560216E
42
T54196
30
SPC560217E
42
TP-351A
37
SPC560218E
42
ZSN18358
SPC560219E
42
SPC560220E
42
17, 19, 22
DS211TT4
18
DS211TT6
16, 17,
18, 22, 24
DS211TTR13
17, 19,
20, 23, 24
DS211TTR2
18, 20,
23, 25
DS211TTR23
22
SPC560221
42
42
DS211TTR3
16, 17,
18, 20, 22,
23, 24, 25
SPC560231E
SPC560232E
42
DS211TTR9
20
SPC560234E
42
SPC560236E
42
SPC560240E
42
42
19
DS216TTR3
21
PAGE NO.
P2024506
DS211TT3
DS214TTR3
PART NO.
FD209RB
19, 20, 21,
22, 23, 25
SPC560242E
SPC560245E
42
FD209RK
20, 22, 24
SPC560247E
42
FD209RM
21, 24, 25
SPC560249E
42
FD211RE
17, 20, 22
SPC560251E
42
FD211RJA
20, 25
ST14253
33
FD211RM
17, 21,
23, 25
ST14255
32
GD-161A
39
ST14256
33
GP-102
38
ST14257
33
GP-103
38
ST14258
32
HPC100GP
21
ST462313DS
32
P2024470
44
ST462314HXDS
32
P2024472
44
ST463236R1
32
P2024474
44
ST463237R1
32
P2024481
44
ST463238R1
32
P2024483
44
ST463253R1
32
P2024490
44
ST463254R1
32
P2024492
44
ST464582R1
32
P2024494
44
ST464583R1
32
P2024496
44
ST464591R1
32
P2024498
44
ST475937HXDS
33
P2024500
44
ST522325R12
33
P2024502
44
ST59057C1
33
P2024503
44
ST59058C1
33
P2024504
44
ST660020HXDS
33
34, 35
PA RT NUMBE R I N DE X
55
SAFETY NEVER HURTS !™ Always read the
Operator’s Manual before operating any equipment.
Inspect equipment before using it, and be sure it is
operating properly. Follow the product safety signs,
and use any safety features provided.
©2014 CNH Industrial America LLC. All rights reserved.
New Holland is a trademark registered in the United States and many other countries, owned
by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Reman is
a trademark in the United States and many other countries, owned by or licensed to
CNH Industrial N.V., its subsidiaries or affiliates. www.newholland.com
Any trademarks referred to herein, in association with goods and/or services of companies,
other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the
property of those respective companies.
PM-17048A Issued 05/2014 Replaces: PM-17048

tillage and planting

Transcription

Similar documents

PEER Agricultural Catalog 2015

NTN-BCA Catalog