MultiBead Gun Puffe Engineering MultiBead Guns Type MB
Transcription
MultiBead Gun Puffe Engineering MultiBead Guns Type MB
MB MultiBead Gun Puffe Engineering MultiBead Guns Type MB Are build for long live time and hard industrial environment.. The MB guns are able to dispense continues or intermittent glue beads on a temperature level of up to 200°C optional 250°C Benefits: Aluminium gun body Optimised for solid hotmelt Available up to 2m width Long operation time due to high end needle sealing system Temperature level up to 200°C (optional 250°C) Available with normal nozzle tip, reduced or zero cavity system Integrated needle adjustment system Fast intermittent due to air/air driven piston system HT– magnetic valve Wide range on selectable sensors PT100, FeCuNi, and N120 Integrated shafts to put into a holding system Solide Applications: Glue bead dispense on Rotary pleating machines Glue bead dispense on knife pleating machines MB Technical information Optional Twin Nozzle * Depending on adhesive Max. Switching speed 3,000 / min Power supply 240V / AC +PE / 24V Temperature sensor PT100 / FeCuNi / Ni120 Power supply mag valve 24 Volt / DC Max. Temperature 200°C (optional 250°C) Air supply 6 bar Max. System presure 85 bars Puffe Engineering GmbH Rebenstraße 24 53757 Sankt Augustin [email protected] www.puffe.eu Tel.: +49 (0)2241-866060-0 Fax.: +49 (0)2241-866060-90 All information subject to change without notice © Puffe Engineering GmbH Standard Rev.-No.01 16.02.2015 Sample MB 24– FM25