Osmundson Catalog - John Day Company

Transcription

11
OSMUNDSON MFG. CO.
PARTS CATALOG
16082 141SSTT
PEER
Y, IO
RY
A
RR
WA
OW
800-824-6661
515-465-2126- FFA
X
AX
W
N.C
ON
SO
DS
ND
UN
W.O
MU
M
WW
SM
OM
WW
OS
CO
TABLE OF CONTENTS
PRODUCTS
22
PAGE #
SWEEPS
FIELD CULTIVATOR SWEEPS -----------------------------------------------------------------------------FIELD CULTIVATOR APPLICATION CHART -------------------------------------------------------------ROW CROP SWEEPS ----------------------------------------------------------------------------------------MARATHON/DELTA BUSTER SWEEPS --------------------------------------------------------------------CHISEL PLOW SWEEPS ------------------------------------------------------------------------------------AGGRESSOR CHISEL PLOW SWEEPS --------------------------------------------------------------------CHISEL PLOW APPLICATION CHART --------------------------------------------------------------------HEEL SWEEPS/CP SWEEPS/SUB-SOILERS -----------------------------------------------------------------
3, 4 & 5
6&7
8
9
10
11
12 & 13
14
DANISH
OK SWEEPS ------------------------------------------------------------------------------------------------- 15
S-TINES ------------------------------------------------------------------------------------------------------ 15
CLAMPS ------------------------------------------------------------------------------------------------------- 15
SPIKES/POINTS
SPEAR POINT SHOVELS -----------------------------------------------------------------------------------QUACKERS -------------------------------------------------------------------------------------------------SPRING TOOTH POINT -------------------------------------------------------------------------------------CHISEL PLOW SPIKES -------------------------------------------------------------------------------------TWISTED CHISEL SPIKES ---------------------------------------------------------------------------------BULL TONGUE ----------------------------------------------------------------------------------------------CARBIDE DRILL POINTS -----------------------------------------------------------------------------------
16
16
16
17
18
19
19
DISC BLADES
REGULAR DISC BLADES ----------------------------------------------------------------------------------NOTCHED DISC BLADES ----------------------------------------------------------------------------------DISC BLADE APPLICATION CHART ------------------------------------------------------------------------
20
21
22 & 23
COULTER BLADES
PLAIN, WAVY, FLUTED, BUBBLE BLADES ---------------------------------------------------------------COULTER APPLICATION CHART ----------------------------------------------------------------------------
24
25 & 26
MOLDBOARD PLOWS
INTRODUCTION ---------------------------------------------------------------------------------------------RIB SHARES/ROCK SHARES ------------------------------------------------------------------------------PLOW SHARE REFERENCE SHEETS ----------------------------------------------------------------------PLOW SHARE SPECS ----------------------------------------------------------------------------------------SHINS ---------------------------------------------------------------------------------------------------------LANDSIDES/WEAR PADS ------------------------------------------------------------------------------------REFERENCE SHEETS ------------------------------------------------------------------------------------------
27
28 & 29
30 & 31
32 & 33
35
36
37-44
SUB-SOILER POINTS ------------------------------------------------------------------------------------ 45
WARRANTY INFORMATION --------------------------------------------------------------------------- 46
33
FIELD CULTIVATOR SWEEPS
NEVER NARROWS
PLAIN AND HARD FACED
(47O STEM ANGLE 3/8” BOLT HOLES)
NEVER NARROWS
Always Keeps
Its Width
FCDF SERIES
47O STEM ANGLE, 3/8” PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE 3/8” X 1 1/4” NO. 3 HEAD BOLTS.
1 5/8” TO 1 3/4” HOLE SPACING. ADD “HF” TO PART NUMBER WHEN ORDERING HARD-FACED.
PART #
4-FCDF-4-47
6-FCDF-4-47
7-FCDF-4-47
8-FCDF-4-47
9-FCDF-4-47
10-FCDF-4-47
12-FCDF-4-47
SIZE
4”
6”
7”
8”
9”
10”
12”
THICKNESS
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
PCS/BNDL
10
10
10
10
10
10
10
WGT/BNDL
18.00 lbs.
21.50 lbs.
24.00 lbs.
26.50 lbs.
28.50 lbs.
31.00 lbs.
35.25 lbs.
WILL FIT:
ANDERSON
BUSH HOG
C.C.I.L. 179 379 Z
CASE FC FCM FCSW
COCKSHUTT 285 AND 485
FORD 208
GLENCOE 101
KEWANEE
KRAUSE 600 AND 900
LEON VIBRA FLEX
MASSEY FERGUSON 160
MINNEAPOLIS MOLINE FT
200
MORRIS L240 AND L320
OLIVER 285, 385, 485
TAYLOR
WHITE
44
NEVER NARROWS
(47 STEM ANGLE 7/16” BOLT HOLES)
O
NEVER NARROWS
Always Keeps
Its Width
WILL FIT:
BOURGAULT
BRADY AFTER 1971
BRILLION AFTER 1986
CALKINS
CASE/IHC 45 AND VIBRA SHANK
CRUSTBUSTER
DAKON
DEERE 940-960-980-985
726 MULCH FINISHER
DEGELMAN
DMI
EZEE-ON
FARMERS FACTORY
FLEXI-COIL 200-400
FRONTIER
GLENCOE 4300
HESSTON
HINIKER
INGHAM
KENT
KRAUSE 4200, 4250,
3100 & 6100
LANDOLL
M&W 724
MASSEY HARRIS
MF 259
NOBLE
RHINO (ATHENS)
SUNFLOWER
WIL-RICH
WINPOWER 1500
FCH SERIES
47O STEM ANGLE, 7/16” PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE
7/16” X 1 1/4” NO. 3 HEAD BOLTS. 1 5/8” TO 1 3/4” HOLE SPACING. ADD
“HF” IN FRONT OF PART NUMBER WHEN ORDERING HARD-FACED.
PART #
4-FCH-4-47
6-FCH-4-47
7-FCH-4-47
8-FCH-4-47
9-FCH-4-47
10-FCH-4-47
11-FCH-4-47
12-FCH-4-47
SIZE
4”
6”
7”
8”
9”
10”
11”
12”
THICKNESS
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
PCS/BNDL
10
10
10
10
10
10
10
10
WGT/BNDL
18.00 lbs.
21.50 lbs.
24.00 lbs.
26.50 lbs.
28.50 lbs.
31.00 lbs.
33.00 lbs.
35.25 lbs.
55
NEVER NARROWS
(40 STEM ANGLE 3/8” BOLT HOLES)
O
NEVER NARROWS
Always Keeps
Its Width
FCO SERIES
40O STEM ANGLE, 3/8” PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE 3/8” X 1 1/4” NO. 3 HEAD BOLTS.
1 5/8” TO 1 3/4” HOLE SPACING. ADD “HF” IN FRONT OF PART NUMBER WHEN ORDERING HARD-FACED.
WILL FIT:
ALLIS (EARLY MODELS)
BAKER
BRADY (PRIOR TO ‘70-’71)
BRILLION (PRIOR TO 1986)
COCKSHUTT (EARLY MODELS)
DEERE (CCA, CC10, CC20
AND 1000 SERIES)
GLENCOE (1250 DOUBLE
SHANK)
KRAUSE (K-TINE)
OLIVER (245 AND 345)
PART #
4-FCO-4-40
6-FCO-4-40
7-FCO-4-40
8-FCO-4-40
9-FCO-4-40
10-FCO-4-40
12-FCO-4-40
SIZE
4”
6”
7”
8”
9”
10”
12”
THICKNESS
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
PCS/BNDL
10
10
10
10
10
10
10
WGT/BNDL
18.00 lbs.
21.50 lbs.
24.00 lbs.
26.50 lbs.
28.50 lbs.
31.00 lbs.
35.25 lbs.
66
OSMUNDSON
FIELD CULTIVATOR APPLICATION CHART
Allis Chalmers
Allis Chalmers (Early Models)
Anderson
Baker
Bourgault
Brady (after ‘70-’71)
Brady (prior to ‘70-’71)
Brillion
Brillion (Prior to 1986)
Buffalo No Till Applicators
Bush Hog
C.C.I.L. 179, 379, 200
Calkins
Case
Case, FC, FCM, FCSW
Case/IHC 45 and Vibra Shank
Cockshutt (Early Models)
Cockshutt 237-239-337
Cockshutt 285, 485
CrustBuster
Dakon
Deere 1600 Series 726, 940-960, 980, 985
Deere CCA, CC10, CC20, 1000
Degelman
DMI
Ezee-On
Farmers Factory
Flexi-Coil 200, 400
Ford 208
Forrest City Du-All
Frontier
(2) 7/16”
(2) 3/8”
(2) 3/8”
(2) 3/8”
(2) 7/16”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 3/8”
(2) 3/8”
(2) 7/16”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 7/16”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 7/16”
(2) 7/16”
(2) 7/16”
(2) 7/16”
(2) 3/8”
(2) 7/16”
(2) 7/16”
2” CC
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
2” CC
1 3/4”
1 3/4”
1 3/4”
2” CC
1 3/4”
1 3/4”
1 3/4”
2” CC
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
2” CC
1 3/4”
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
54
40
47
40
47
47
40
47
40
54
47
47
47
54
47
47
40
54
47
47
47
47
40
47
47
47
47
47
47
54
47
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
HSS
FCO
FCDF
FCO
FCH
FCH
FCO
FCH
FCO
HSS
FCDF
FCDF
FCH
HSS
FCDF
FCH
FCO
HSS
FCDF
FCH
FCH
FCH
FCO
FCH
FCH
FCH
FCH
FCH
FCDF
HSS
FCH
*ALL FCDF SERIES SWEEPS MAY BE INTERCHANGED WITH FCH SERIES USING SPECIAL BOLT
WITH 3/8” BODY AND 7/16” HEAD.
77
OSMUNDSON
FIELD CULTIVATOR APPLICATION CHART
Glencoe (old) 1250 Double Shank
Glencoe 4300
Glencoe, FC, MFC, FCSW 101
Hesston
Hiniker
IHC 45
Ingham
Kent
Kewanee
Krause (K-Tine)
Krause 4200, 4250, 3100, 6100
Krause 600/900
Landoll
Leon Vibra Flex
M&W
Massey Ferguson 160
Massey Ferguson 259
Massey Harris
Minneapolis Moline FT200
Minntoba LDC 726-729
Morris L240, L320
Noble
Oliver 245, 345
Oliver 285, 385, 485
Rhino/Athens
Sunflower
Taylor
White Farm Equipment
Wil-Rich
Win Power 1500
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
3/8”
7/16”
3/8”
7/16”
7/16”
7/16”
7/16”
7/16”
3/8”
3/8”
7/16”
3/8”
7/16”
3/8”
7/16”
3/8”
7/16”
7/16”
3/8”
7/16”
3/8”
7/16”
3/8”
3/8”
7/16”
7/16”
3/8”
3/8”
7/16”
7/16”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
2” CC
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
1 3/4”
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
40
47
47
47
47
47
47
47
47
40
47
47
47
47
47
47
47
47
47
54
47
47
40
47
47
47
47
47
47
47
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
FCO
FCH
FCDF
FCH
FCH
FCH
FCH
FCH
FCDF
FCO
FCH
FCDF
FCH
FCDF
FCH
FCDF
FCH
FCH
FCDF
HSS
FCDF
FCH
FCO
FCDF
FCH
FCH
FCDF
FCDF
FCH
FCH
*ALL FCDF SERIES SWEEPS MAY BE INTERCHANGED WITH FCH SERIES USING SPECIAL BOLT
WITH 3/8” BODY AND 7/16” HEAD.
88
ROW CROP CULTIVATOR SWEEPS
(54 STEM ANGLE 7/16” BOLT HOLES 5/8” CENTER HOLE)
O
NEVER NARROWS
Always Keeps
Its Width
THESE SWEEPS ARE PUNCHED WITH THREE HOLES. TWO ON 2’’ CENTER FOR 7/16’’ BOLT AND 1 ¾ #3 HEAD
BOLTS. THE CENTER HOLE IS SQUARE FOR A 5/8 X 1 ¾ CARRIAGE BOLT. THE HIGH SPEED ROW CROP
SWEEP IS MADE WITH A 54 DEGREE SHANK ANGLE. FOR HARD-FACED SWEEPTS AD “HF” IN FRONT OF THE
NUMBER
SIZE
PART #
PCS/BDL
4” x 1/4” Full Sweep
6” x 1/4” Left Half Sweep
6” x 1/4” Right Half Sweep
4HSS4
6HSS4
6HSS4-LH
6HSS4-RH
10
10
10
10
8HSS4
8HSS4-LH
8HSS4-RH
10HSS4
10HSS4-LH
10
10
10
10
10
10HSS4-RH
12HSS4
14HSS4
16HSS4
10
10
10
10
WGT./BDL.
18.00 lbs.
21.50 lbs.
14.40 lbs.
14.40 lbs.
26.50 lbs.
20.50 lbs.
20.50 lbs.
31.00 lbs.
21.10 lbs.
21.10 lbs.
35.25 lbs.
44.00 lbs.
47.00 lbs.
18HSS4
10
53.00 lbs.
99
MARATHON/DELTA BUSTER SWEEPS
x SELF-SHARPENING
x LONG LASTING CHISEL NOSE
x EXTENDED LIFE BY 2 TO 3 TIMES A
REGULAR SWEEP
x CHISEL AND CULTIVATOR
APPLICATIONS
MARATHON SERIES
SPECIAL ORDERS AND SIZES AVAILABLE FOR QUOTATION. CONTACT CUSTOMER SERVICE. LISTED IS OUR
STANDARD SIZES AND AVAILABLITIES.
PART #
7 M 4-47
8 M 4-47
9 M 4-47
10 M 4-47
SIZE
7”
8”
9”
10”
THICKNESS
1/4”
1/4”
1/4”
1/4”
PCS/BNDL
5
5
5
5
WGT/BNDL
15 lbs.
17.25 lbs.
21.25 lbs.
21.50 lbs.
DELTA-BUSTER SWEEPS
SPECIAL ORDERS AND SIZES AVAILABLE FOR QUOTATION. CONTACT CUSTOMER SERVICE. LISTED IS OUR
STANDARD SIZES AND AVAILABLITIES.
PART #
ODB-6
ODB-7
ODB-9
ODB-10
ODB-11
ODB-12
SIZE
6”
7”
9”
10’’
11’’
12’’
THICKNESS
1/4”
1/4”
1/4”
1/4’’
1/4”
1/4”
PCS/BNDL
5
5
5
5
5
5
WGT/BNDL
15 lbs.
15.25 lbs.
21.25 lbs.
21.50lbs
23.00lbs
23.50lbs
1100
HEAVY DUTY CHISEL PLOW SWEEPS
AVAILABLE WITH AGGRESSOR NOSE BY SPECIAL ORDER.
LOW CROWN 50O SHANK ANGLE
The LC (low crown) series sweep has a 50o shank angle.
The holes are punched on 2 1/4” centers and use two
1/2” x 2” #3 head bolts.
DESCRIPTION
14” low crown sweep
PART #
14LC50o
16LC50o
18LC50o
20LC50o
22LC50o
24LC50o
26LC50o
BNDL
5
5
5
1
1
1
1
WGT/BNDL
25.0 lbs.
32.0 lbs.
35.0 lbs.
9.00 lbs.
11.0 lbs.
12.0 lbs.
12.5 lbs.
MEDIUM CROWN 50O SHANK ANGLE
All Osmundson MC (Medium Crown) series are offered in
two hole punchings: 7/16” bolt on 2 1/4” hole spacing and
1/2” bolt on 2 1/4” hole spacing. Please specify bolt hole
size when ordering. Available plain and hard faced. Add
“HF” to part number when ordering hard faced. 5/16”
thickness quoted on request. See application chart.
43o SHANK ANGLE
The H series are used on IHC and have a 43o shank
angle. The holes are punched on 2 1/4” to 2 1/2”
centers and use two 1/2” x 2” #3 head bolts.
DESCRIPTION
10” sweep
12” sweep
14” sweep
16” sweep
18” sweep
PART #
10H43o
12H43o
14H43o
16H43o
18H43o
BNDL
5
5
5
5
5
WGT/BNDL
23 lbs.
24 lbs.
25 lbs.
32 lbs.
35 lbs.
10”
12”
14”
16”
18”
DESCRIPTION
medium crown sweep
medium crown sweep
medium crown sweep
medium crown sweep
medium crown sweep
PART #
10MC50o
12MC50o
14MC50o
16MC50o
18MC50o
The holes are punched on 2 1/4” centers and use
two 1/2” x 2” #3 head bolts. Available plain and hard
faced. Add “HF” to part number when ordering hard
faced. 5/16” thickness quoted upon request. See
application chart.
DESCRIPTION
14” medium crown sweep
PART #
14MC47o
16MC47o
18MC47o
BNDL
5
5
5
WGT/BNDL
25 lbs.
32 lbs.
35 lbs.
BNDL
5
5
5
5
5
WGT/BNDL
23 lbs.
24 lbs.
25 lbs.
32 lbs.
35 lbs.
1111
AGGRESSOR
NEVER NARROWS CHISEL PLOW SWEEP
IHC 43O SHANK ANGLE 90O NOSE ANGLE
The holes are punched on 2 1/4” to 2 1/2” centers and use
two 1/2” x 2” #3 head bolts. See application chart on page
23.
The holes are punched on 2 1/4” centers and use
7/16” x 2” #3 head bolts.
DESCRIPTION
14” sweep
16” sweep
18” sweep
PART #
14 AG 43o
16 AG 43o
18 AG 43o
BNDL
5
5
5
WGT/BNDL
32.0 lbs.
35.5 lbs.
39.0 lbs.
DESCRIPTION
PART #
14 AG 50o
16 AG 50o
18 AG 50o
BNDL
5
5
5
WGT/BNDL
32.0 lbs.
35.5 lbs.
39.0 lbs.
BOLTS FOR SHARES AND SHINS
BOLTS FOR SWEEPS AND SPIKES
#3 Head Sweep Bolts Without Nuts
SIZE
PACKING
7/16” x 2 1/2”
50 per box
7/16” x 2”
50 per box
7/16” x 1 3/4”
50 per box
7/16” x 1 1/4”
50 per box
3/8” x 1 1/4”
50 per box
1/2” x 2”
50 per box
1/2” x 3”
25 per box
5/8” x 2”
25 per box
5/8” x 2 1/2”
50 per box
1/2” x 7/16” x 2 1/2”
50 per box
7/16” x 3/8” x 1 1/4”
50 per box
OK Bolts (Elliptical Head with Nuts)
3/8” x 1 1/2” #8 Head
50 per box
WEIGHT
5.5 lbs.
4.5 lbs.
4.5 lbs.
3.0 lbs.
2.0 lbs.
7.5 lbs.
4.0 lbs.
6.25 lbs.
7.25 lbs.
5.0 lbs.
2.0 lbs.
3.25 lbs.
Clipped Head Plow Bolts For Shares & Shins
Without Nuts
SIZE
PACKING
WEIGHT
3/8” x 1 3/16”
50 per box
4.0 lbs.
7/16” x 1 1/4”
50 per box
2.75 lbs.
1/2” x 1 3/8”
50 per box
4.0 lbs.
16mm x 40mm
18 bolts & nuts per box
2.0 lbs.
Nuts For Bolts
3/8”
50 per box
1.0 lbs.
7/16”
50 per box
1.5 lbs.
1/2”
50 per box
3.25 lbs.
All bolts are grade #5, heat treated.
1122
CHISEL PLOW SWEEPS APPLICATION CHART
OSMUNDSON SWEEPS MAY BE USED TO FIT SOME APPLICATIONS BY USING A BOLT THAT HAS A 1/2” HEAD – 7/16”
THREADED BODY. NOTE: SINCE SUCH TIME AS THIS INFORMATION WAS OBTAINED, SEVERAL MANUFACTURERS
HAVE SWITCHED TO 1/2” PUNCHED SHANKS. A“SPECIAL BOLT” WILL ENABLE INVENTORY OF 1/2” PUNCHED
SWEEPS TO FIT 7/16” PUNCHED SHANKS. THE “SPECIAL BOLT” IS AVAILABLE IN 2” AND 2 1/2” LENGTHS.
MANUFACTURED BY
Allis Chalmers 22”-32”
Anderson
Brady
Brillion
Case (Some)
Case (Later Models)
Case 700, 900, 110
C.C.I.L. Thick Shank
C.C.I.L. 1 1/4” Thick Shank
Cockshutt 240, 246, 247, 476, 249
Crown
DMI
Degelman
Dempster
Edwards
Flexi-Coil (2” x 1” Shank)
Ford
Ford 131
Friggstad
Glencoe
Glencoe High Clearance
Graham Low Clearance
Graham High Clearance
Gysler
Hiniker
IHC-#3
IHC-10, 50, 55, 75, 64 S
Ingham
Jeoffroy – 16”
Jeoffroy – 22” – 32”
John Deere
John Deere 650 Coil
STEM
ANGLE
43o
50o
50o
40
47o
50o
54o
50o
43o
50o
50o
50o
50o
54o
50o
50o
47o
50o
50o
47o
50o
54o
50o
47o
50o
54o
43o
43o
50o
43o
50o
54o
HOLE
SIZE
7/16”
7/16”
7/16”
½
1/2”
7/16”
7/16”
7/16”
1/2”
7/16”
1/2”
1/2”
7/16”
7/16”
7/16”
1/2”
1/2”
7/16”
7/16”
1/2”
7/16”
7/16”
7/16”
1/2”
1/2”
7/16”
1/2”
7/16”
7/16”
7/16”
1/2”
7/16”
HOLE
CENTERS
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
SWEEPS
SERIES
H43
MC50
MC50
H431/2
MC47
MC50
N/A
MC50
H43
MC50
MC50
MC50
MC50
N/A
MC50
MC50
MC47
MC50
MC50
MC47
MC50
N/A
MC50
MC47
MC50
N/A
H43
H43
MC50
H43
MC50
N/A
1133
CHISEL PLOW SWEEPS APPLICATION CHART
MANUFACTURED BY
John Deere (Some)
Kewanee
Krause (Low Clearance)
Krause (High Clearance)
Krause (Some)
Leon
Massey Harris
Massey Ferguson 128
Massey “Trash King”
Mel-Cam
Mel-Cam Cultiweeder
Melroe (Clark)
Minneapolis Moline T-500
Minneapolis Moline T600, 1500, 1800
Minn-Toba 120, 176
Minn-Toba 3 point hitch
Mohawk
Morris 220
Morris MP 912 & Magnum
Noble XR-20
Oliver 247, 248, 347 U.S.
Oliver 500, 3500
Robin/Nodwell
Rogin
Roll-A-Cone
Roll-O-Flex
Schulte 300
Sunflower
Versatile
Victory
Wil-Rich
Wil-Rich (Early)
STEM
ANGLE
47o
50o
47o
50o
54o
50o
43o
54o
50o
50o
43o
47o
54o
50o
50o
43o
43o
43o
50o
50o
43o
43o
50o
50o
50o
54o
50o
50o
43o
50o
54o
50o
HOLE
SIZE
1/2”
7/16”
1/2”
7/16”
7/16”
1/2”
7/16”
7/16”
7/16”
7/16”
7/16”
1/2”
7/16”
1/2”
7/16”
7/16”
1/2”
7/16”
1/2”
7/16”
7/16”
7/16”
7/16”
7/16”
1/2”
7/16”
7/16”
7/16”
7/16”
1/2”
7/16”
1/2”
HOLE
CENTERS
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
2 1/4”
SWEEPS
SERIES
MC47
MC50
MC50
MC50
N/A
MC50
H43
N/A
MC50
MC50
H43
MC47
N/A
MC50
MC50
H43
H43
H43
MC50
MC50
H43
H43
MC50
MC50
MC50
MC50
MC50
MC50
H43
MC50
N/A
MC50
1144
HEEL SWEEPS
THE HEEL SWEEP
IS DESIGNED TO FIT OVER THE TOP OF THE CHISEL PLOW SHANK.
CHISEL PLOW SPIKE BOLTS ON THE FRONT IN COMBINATION WITH THE SWEEP.
A
THIS
COMBINATION ALLOWS BOTH CHISELING AND CULTIVATING OPERATIONS AT THE SAME
TIME.
THE
SWEEP SHOULD BE MOUNTED SO THAT THE WINGS OF THE SWEEP ARE LEVEL WHEN
THE CHISEL PLOW FRAME IS LEVEL.
THE
SWEEP HAS SLOTTED HOLES SO THAT LEVELING
ADJUSTMENTS CAN BE MADE WHEN THE SWEEP IS MOUNTED.
SWITCH PLOW
MODEL
HARRELL
DEERE
LONG
BAKER
OEM OSMUNDSON
PART #
PART #
79006
OSP Harrell
57270
OSP Deere
791406
OSP Long
SB100
OSP Baker
BOLT USED
1/2 x 1 3/8 P.B.
1/2 x 1 3/8 P.B.
1/2 x 1 3/8 P.B.
9/16 x 1 3/8 P.B.
CP SWEEPS
1L
5/16” THICKNESS AVAILABLE. PUNCHED ON 2 1/4”
CENTERS FOR EITHER 7/16” OR 1/2” BOLTS.
PART #
6 CP4-12
8 CP4-12
WGT/
BNDL
60 lbs
60 lbs.
63 lbs.
63 lbs.
BNDL
5
5
WGT/BNDL
15 lbs.
15 lbs.
COTTON POINT
DESCRIPTION
Cotton Point
BUNDLING
1
1L FOR HAMBY, ROLL-A-CONE, BIGHAM,
JOHNSON, HOWARD AND TEXAS RIPPOR, STANDARD
TOOTH BOX SCRAPER.
DESCRIPTION
1L
BUNDLING
1
WEIGHT
2 lbs.
BIG OX POINTS
WEIGHT
7.5 lbs.
DESCRIPTION
OX-1
BUNDLING WEIGHT
1
3 lbs.
1155
SOIL FINISHING MACHINES REQUIRING S-TINES
ALLIS CHALMERS – 1200 – 1300
BECKER / ATI
BER VAC
BUCKEYE
KOEHN
KONGSKILDE
NOBLE MIX-N-TILL
UNVERFERTH CULTI-SYSTEM
VICON / MCKEE
S-Tine Clamps
DESCRIPTION
WHAT IT FITS
2” x 2”
2.5” x 2.5”
32 x 10 x 560 mm standard
32 x 12 x 660 mm high clearance
S-T INES
DESCRIPTION
WIDTH
THICKNESS
HEIGHT
WEIGHT
Standard
Heavy Standard
High Clearance
32 mm (1.25 in.)
32 mm (1.25 in.)
32 mm (1.25 in.)
10 mm (0.394 in.)
12 mm (0.422 in.)
12 mm (0.422 in.)
560 mm (22 in.)
560 mm (22 in.)
660 mm (26 in.)
5.95 lbs.
8.00 lbs.
8.81 lbs.
S-tines, clamps and bolts made to demanding OEM specifications. Tines are made from
high quality spring steel with rounded edges – shot peened and painted black.
OK SWEEPS
DESCRIPTION
PART #
1” TOOTH
2 3/4” Sweep
4” Sweep
7” Sweep
9” Sweep
OK1
OK 2 3/4
OK4 or OK4V
OK7
OK9
BOLTS USED
3/8”
3/8”
3/8”
3/8”
3/8”
x
x
x
x
x
1
1
1
1
1
1/2”
1/2”
1/2”
1/2”
1/2”
Elliptical
Elliptical
Elliptical
Elliptical
Elliptical
Head
Head
Head
Head
Head
Bolt
Bolt
Bolt
Bolt
Bolt
BUNDLING
WEIGHT/BNDL
10
10
10
10
10
7.5 lbs.
8 lbs.
11 lbs.
13 lbs.
23 lbs.
All OK Sweeps are 1/4” thick. The OK Sweeps are made to fit the Danish S-tine and other field
preparation equipment of this type. Add “HF” to part number when ordering hard faced.
1166
SPRING TOOTH
THESE CULTIVATOR POINTS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1” TO 2” SPACINGS. MADE FROM STURDY
5/16” FLAT STOCK FOR LONG DEPENDABILITY. PLATED AND SHARPENED FOR BETTER WEAR. ADD “HF” TO PART
NUMBER WHEN ORDERING HARD FACED.
DESCRIPTION
2 1/2” x 5/16” x 11”
2” x 5/16” x 11”
2” x 5/16” x 11”
PART #
210A
211
211D
BOLTS USED
Two 7/16” x 1 1/4” #3 head
Two 7/16” x 1 1/4” #3 head
Two 3/8” x 1 1/4” #3 head
QUACKERS
BUNDLING
25
25
25
WEIGHT/BNDL
50 lbs.
40 lbs.
40 lbs.
ALL QUACKERS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1 5/8” OR 2” HOLE SPACING. MADE FROM FLAT
STOCK MATERIAL A FULL 5/16” THICK TO GIVE THESE QUACKERS THAT EXTRA MEASURE OF DEPENDABILITY AND
LONGER LIFE. ADD “HF” TO PART NUMBER WHEN ORDERING HARD FACED.
DESCRIPTION
1 3/4” x 5/16” x 10”
1 3/4” x 5/16” x 10”
2” x 5/16” x 10”
PART #
103
107
203
BOLTS USED
Two 3/8” x 1 1/4” #3 head
Two 7/16” x 1 1/4” #3 head
Two 3/8” x 1 1/4” #3 head
BUNDLING
25
25
25
WEIGHT/BNDL
31 lbs.
31 lbs.
34 lbs.
SPEAR POINT SHOVELS PLAIN AND HARD FACED
PUNCHED ON 1 5/8” TO 2” CENTER TO FIT ALL CULTIVATORS. MADE FROM 1/4” HEAT
TREATED STEEL. ADD “HF” TO PART NUMBER WHEN ORDERING HARD FACED.
DESCRIPTION
1/4” x 5”
PART #
845
BOLTS USED
Two 7/16” x 1 1/4” #3 head
BUNDLING
10
WEIGHT/BNDL
18 lbs.
1177
CHISEL PLOW SPIKES
USING 2 1/4” - 2 1/2” CENTERS – STRAIGHT
CHISEL SPIKES UPSET AND FLAT NOSE
THE 1878 AND 1858 SERIES REVERSIBLE SPIKES HAVE UPSET (SWEDGE)
POINTS FOR INCREASED WEAR AND LONGER LIFE. EVEN AFTER CONSIDERABLE USE,
THESE SPIKES RETAIN THEIR ORIGINAL SHAPE AND STAY SHARP.
THE 582 SERIES REVERSIBLE SPIKES HAVE FLAT FORGED POINTS
SEEN ON MOST ORIGINAL EQUIPMENT.
OSMUNDSON
PART #
1878-1/2
1858-1/2
582-1/2
OVERALL SIZE:
THICKNESS x WIDTH x LENGTH
7/8” x 2” x 18”
5/8” x 2” x 18”
5/8” x 2” x 18”
C-78
4516
7/8” x 2” x 15 1/2”
1/4” x 4 1/2” x 16”
NOSE
STYLE
Upset
Upset
Flat
Chromium
Carbide
Furrower
Using 2 1/4” Centers –
OSMUNDSON
PART #
1878-7/16
1858-7/16
582-7/16
OVERALL SIZE
THICKNESS X WIDTH X LENGTH
7/8” x 2” x 18”
5/8” x 2” x 18”
5/8” x 2” x 18”
C-78
7/8” x 2” x 15 1/2”
BOLT
SIZE
1/2”
1/2”
1/2”
BOLT
SPACING
2 1/4”-2 1/2”
2 1/4”-2 1/2”
2 ¼ only
BNDL
5
5
5
WGT/BNDL
37 lbs.
28 lbs.
28 lbs.
1/2”
1/2”
2 1/4”-2 1/2”
2 1/4”-2 1/2”
5
5
33 lbs.
23 lbs.
Straight Chisel Spikes
NOSE
STYLE
Upset
Upset
Flat
Chromium
Carbide
BOLT
SIZE
7/16”
7/16”
7/16”
BOLT
SPACING
2 1/4”
2 1/4”
2 1/4”
BNDL
5
5
5
WGT/BNDL
37 lbs.
28 lbs.
28 lbs.
7/16”
2 1/4”
5
33 lbs.
1878 &
1858
Series
4516
Furrower
582 Series
C78
Series
1188
TWISTED CHISELS
SLASH POINT TWISTED CHISELS
OCC AND OS SERIES PARTS ARE DESIGNED TO FIT MOST OF THE MODERN
MINIMUM-TILL COULTER CHISELS ON THE MARKET TODAY. AVAILABLE
ARE THE ONE-PIECE REPLACEMENT FOR THE 3-PIECE ASSEMBLY AND THE
SHARE AND MOLDBOARD FOR THE 3-PIECE ASSEMBLY. IN MOST
CONDITIONS, THE FARMER WILL BE ABLE TO RUN A MOLDBOARD FOR AT
LEAST 2 TO 3 SHARES BEFORE CHANGING OR REVERSING THE
MOLDBOARD. THE #383 SERIES ARE 3/8” THICK, 3” WIDE AND 22” IN
LENGTH. THE 383-H IS PUNCHED WITH A HOLE AND SLOT TO FIT 2 1/4”
TO 2 1/2” SPACING. THE #123 SERIES ARE 1/2” THICK, 3” WIDE AND 22”
IN LENGTH. THE 123-H IS PUNCHED WITH A HOLE AND SLOT TO FIT 2 1/4”
TO 2 1/2” SPACINGS. CH:CLIPPED HEAD
OCC 124
PART #
SIZE
HOLE SPACING
BOLT SIZE
WEIGHT
Single Piece Chisel (will replace 3-piece)
OCC124-R 1/2” x 4” x 26”
2 1/4”
1/2”
12 lbs.
OCC124-L 1/2” x 4” x 26”
2 1/4”
1/2”
12 lbs.
Replacement Points for 3-piece Moldboard Twist Assembly
OS-SSP-R
1/2” x 4”
N/A
1/2” CH
3 lbs.
OS-SSP-L
1/2” x 4”
N/A
1/2” CH
3 lbs.
Replacement Moldboards for 3-piece Moldboard Twist Assembly
OS-SSM-R 1/2” x 4” x 18”
2 1/4”
1/2”
10.5 lbs.
OS-SSM-L
1/2” x 4” x 18”
2 1/4”
1/2”
10.5 lbs.
Replacement Frog for 3-piece Moldboard Twist Assembly
CPFL & CPFR Frog
3.5 lbs.
OSMUNDSON
PART #
123H-L
123H-R
OSMUNDSON
PART #
123-L
123-R
DESCRIPTION
3” x 1/2” x 22”
left twist
3” x 1/2” x 22”
right twist
BOLTS USED
(2) 1/2” x 3”
#3 head
(2) 1/2” x 3”
#3 head
BNDL
WGT/BNDL
5
42 lbs.
5
42 lbs.
DESCRIPTION
3” x 1/2” x 22”
left twist
3” x 1/2” x 22”
right twist
BOLTS USED
(2) 7/16”x2-1/2”
#3 head
(2) 7/16”x2-1/2”
#3 head
BNDL
WGT/BNDL
5
42 lbs.
5
42 lbs.
OS-SSM
OS-SSP
123H
1199
BULL TONGUE SHOVEL PLAIN AND HARD FACED
THESE CULTIVATOR POINTS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1 5/8” TO 2” SPACINGS. MADE FROM
STURDY 1/4” OR 5/16” FLAT STOCK FOR LONG DEPENDABILITY. ADD “HF” TO PART NUMBER WHEN ORDERING
HARD FACED.
DESCRIPTION
2 1/2” x 1/4” x 10 3/4”
2 1/2” x 5/16” x 10 3/4”
PART #
BT14
BT15
BOLTS USED
Two 3/8” x 1 1/4” #3 Head
Two 3/8” x 1 1/4” #3 Head
BUNDLING
25
25
WEIGHT/BNDL
37.5 lbs.
47.0 lbs.
CARBIDE DRILL POINTS
OSM PART #
E1
E4
E6 (“V” Type)
TO FIT
IHC “Eagle Beaks”
John Deere, CrustBuster, Acra Plant, Great Plains and Mighty Handy
John Deere, CrustBuster, Acra Plant, Great Plains and Mighty Handy
WT/EA
1.4 lbs.
.8 lbs.
1.0 lbs.
REGULAR DISC BLADES
2200
OPTIONAL HOLE PUNCHING AVAILABLE UPON REQUEST. THESE HAVE PROVEN
TO BE, WITHOUT A DOUBT, ONE OF THE TOUGHEST BLADES ON THE MARKET
TODAY. THESE DISC BLADES ARE STAR OR CENTER HOLE PUNCHED TO MEET
YOUR DISC BLADE REQUIREMENTS BY ELIMINATING A LARGE INVENTORY.
*Available in 3/16” and 5/16” material on
special order with quoted lead time,
minimum quantity and pricing.
REGULAR DISC BLADES
DIAMETER
16” Disc Blade
16” Disc Blade
16” Disc Blade
18” Disc Blade
18” Disc Blade
18” Disc Blade
18” Disc Blade
18” Disc Blade
18” Disc Blade
18” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
20” Disc Blade
22” Disc Blade
22” Disc Blade
22” Disc Blade
22” Disc Blade
*24” Disc Blade
*24” Disc Blade
*24” Disc Blade
*24” Disc Blade
*26” Disc Blade
*26” Disc Blade
*26” Disc Blade
*26” Disc Blade
*26” Disc Blade
THICKNESS
GAUGE DECIMAL
11
11
11
11
11
11
9
9
9
9
9
9
9
7
7
7
7
7
7
7
7
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
(.118)
(.118)
(.118)
(.118)
(.118)
(.118)
(.138)
(.138)
(.138)
(.138)
(.138)
(.138)
(.138)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
MM
TO FIT
AXLE SIZE
BUNDLING
OSMUNDSON
PART #
WGT/
BNDL
3
3
3
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
6
6
6
6
6
6
6
6
6
6
7/8 sq x 1 rd
1 x 1 1/8
1 1/8 x 1 1/4
7/8 sq x 1 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 x 1 1/8
1 1/8 x 1 1/4
1 1/8 rd
1 1/2 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 1/2 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 1/8 rd
1 1/2 rd
1 3/4 rd
1 1/8 x 1 1/4
1 1/2 rd
1 3/4 rd
1 1/2 sq
1 1/2 sq
1 1/2 rd
1 3/4 rd
2rd
1 1/4 sq
1 1/2 sq
1 1/2 rd
1 3/4 rd
2rd
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
16DB781C
16DB1118
16DB1814
18DB781C
18DB1118
18DB1814
18DB9ga1118
18DB9ga1814
18DB9ga118rd
18DB9ga112rd
20DB9ga1118
20DB9ga1814
20DB9ga112rd
20DB7ga1118
20DB7ga1814
20DB7ga118rd
20DB7ga112rd
20DB7ga134rd
22DB7ga1814
22DB7ga112rd
22DB7ga134rd
22DB112sq
24DB112sq
24DB112rd
24DB134rd
24DB200rd
26DB114sq
26DB112sq
26DB112rd
26DB134rd
26DB200rd
175 lbs.
175 lbs.
175 lbs.
220 lbs.
220 lbs.
220 lbs.
258 lbs.
258 lbs.
258 lbs.
258 lbs.
313 lbs.
313 lbs.
313 lbs.
400 lbs.
400 lbs.
400 lbs.
400 lbs.
400 lbs.
495 lbs.
495 lbs.
495 lbs.
644 lbs.
835 lbs.
835 lbs.
835 lbs.
835 lbs.
990 lbs.
990 lbs.
990 lbs.
990 lbs.
990 lbs.
DEEP CONE DISC BLADES TO FIT JOHN DEERE
20”
20”
22”
22”
24”
24”
26”
26”
Disc
Disc
Disc
Disc
Disc
Disc
Disc
Disc
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
7
7
7
7
1/4”
1/4”
1/4”
1/4”
20” Disc Blade
22” Disc Blade
*24” Disc Blade
*26” Disc Blade
7
7
1/4”
1/4”
(.177)
(.177)
(.177)
(.177)
(.250)
(.250)
(.250)
(.250)
4.5
4.5
4.5
4.5
6
6
6
6
1
1
1
1
1
1
1
1
1/8
1/4
1/8
1/4
1/4
1/2
1/4
1/2
sq
sq
sq
sq
sq
sq
sq
sq
25
25
25
25
25
25
25
25
20CONE118sq
20CONE114sq
22CONE118sq
22CONE114sq
24CONE114sq
24CONE112sq
26CONE114sq
26CONE112sq
400
400
520
520
835
835
990
990
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
20FCDB7ga118sq
22FCDB7ga118sq
24FCDB112sq
26FCDB112sq
400
495
835
990
lbs.
lbs.
lbs.
lbs.
FLAT CENTER DISC BLADES TO FIT IHC
(.177)
(.177)
(.250)
(.250)
4.5
4.5
6
6
1
1
1
1
1/8
1/8
1/2
1/2
sq
sq
sq
sq
25
25
25
25
2211
NOTCHED DISC BLADES
*Available in 3/16” and 5/16” material on
special order with quoted lead time,
minimum quantity and pricing.
DIAMETER
N16” Disc Blade
N16” Disc Blade
N18” Disc Blade
N18” Disc Blade
N18” Disc Blade
N18” Disc Blade
N18” Disc Blade
N18” Disc Blade
N20” Disc Blade
N20” Disc Blade
N20” Disc Blade
N20” Disc Blade
N20” Disc Blade
N20” Disc Blade
N20” Disc Blade
N22” Disc Blade
N22” Disc Blade
N22” Disc Blade
N22” Disc Blade
N22” Disc Blade
*N24” Disc Blade
*N24” Disc Blade
*N24” Disc Blade
*N24” Disc Blade
*N26” Disc Blade
*N26” Disc Blade
*N26” Disc Blade
*N26” Disc Blade
*N26” Disc Blade
GAUGE
11
11
11
11
11
9
9
9
9
9
9
7
7
7
7
7
7
7
7
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
*N24” Disc Blade
*N24” Disc Blade
*N26” Disc Blade
1/4”
1/4”
1/4”
THICKNESS
DECIMAL
(.118)
(.118)
(.118)
(.118)
(.118)
(.138)
(.138)
(.138)
(.138)
(.138)
(.138)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.177)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
(.250)
MM
3
3
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
6
6
6
6
6
6
6
6
6
6
TO FIT
AXLE SIZE
7/8 sq x 1 rd
1 x 1 1/8
7/8 sq x 1 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 x 1 1/8
1 1/8 x 1 1/4
1 1/2 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 1/2 rd
1 x 1 1/8
1 1/8 x 1 1/4
1 1/2 rd
1 3/4 rd
1 1/8 x 1 1/4
1 1/2 sq
1 3/4 rd
1 1/2 rd
1 1/2 sq
1 1/2 sq
1 1/2 rd
1 3/4 rd
2 rd
1 1/4 sq
1 1/2 sq
1 1/2 rd
1 3/4 rd
2 rd
BUNDLING
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
OSMUNDSON
PART #
N16DB781C
N16DB1118
N18DB781C
N18DB1118
N18DB1814
N18DB9ga1118
N18DB9ga1814
N18DB9ga112rd
N20DB9ga1118
N20DB9ga1814
N20DB9ga112rd
N20DB7ga1118
N20DB7ga1814
N20DB7ga112rd
N20DB7ga134rd
N22DB7ga1814
N22DB7ga112sq
N22DB7ga134rd
N22DB7ga112rd
N22DB112sq
N24DB112sq
N24DB112rd
N24DB134rd
N24DB200rd
N26DB114sq
N26DB112sq
N26DB112rd
N26DB134rd
N26DB200rd
WGT/
BNDL
150 lbs.
150 lbs.
195 lbs.
195 lbs.
195 lbs.
225 lbs.
225 lbs.
225 lbs.
283 lbs.
283 lbs.
283 lbs.
365 lbs.
365 lbs.
365 lbs.
365 lbs.
460 lbs.
460 lbs.
460 lbs.
460 lbs.
588 lbs.
775 lbs.
775 lbs.
775 lbs.
775 lbs.
925 lbs.
925 lbs.
925 lbs.
925 lbs.
925 lbs.
DEEP CONE DISC BLADES TO FIT JOHN DEERE
(.250)
(.250)
(.250)
6
6
6
1 1/4 sq
1 1/2 sq
1 1/4 sq
25
25
25
N24CONE114sq
N24CONE112sq
N26CONE114sq
775 lbs.
775 lbs.
925 lbs.
FLAT CENTER DISC BLADES TO FIT IHC
N20” Disc Blade
N22” Disc Blade
*N24” Disc Blade
*N26” Disc Blade
7
7
1/4”
1/4”
(.177)
(.177)
(.250)
(.250)
4.5
4.5
6
6
1
1
1
1
1/8
1/8
1/2
1/2
sq
sq
sq
sq
25
25
25
25
N20FCDB7ga118sq
N22FCDB7ga118sq
N24FCDB112sq
N26FCDB112sq
365
460
775
925
lbs.
lbs.
lbs.
lbs.
2222
O.E.M. DISC BLADE CENTER HOLE LIST
O.E.M.
DISC MODEL NO.
ALLIS CHALMERS
2100
2300
AMCO
WOD, WTD
WOE
WOF, WOJ
WTF, WTJ
F-15
F-15 B
48
85
148
185
248
258
ATHENS
48
62
116
126
131
AXLE SIZE
AXLE SIZE
1 1/2 Square
1 1/2 Square
DUNHAM-LEHR
GC
34
1 1/8 Square
1 1/2 Round
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
FORD
201
202
204
219
220
221
222
223
236
240
241
243
1 Round
1 Round
1 Round
1 1/2 Square
1 1/8 Square
15/16 Round
1 1/8 Square
1 1/8 Square
1 1/2 Square
1 1/8 Square
1 1/8 Square
1 1/2 Round
1
1
1
1
1
Square
1/8 Square
1/2 Square
1/2 Square
1/2 Square
HESSTON
2410
2440
2420
1 3/4 Round
1 1/8 Square
1 1/8 Square
Square
Round
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
BLANTON
4500
B900
B1000
3000H
1
1
1
1
BURCH
Kwik-Set
208 BW
209
Tru-Cut
1 1/8 Square
1 1/2 Round
1 1/8 Square
7/8 Square
BUSH HOG
245
346
1440
1445
1450
145
146 Reg.
146 HD
1422
1424
1432
1436
1437
1438
1439
1444
Rolling Bedder
O.E.M.
DISC MODEL NO.
1/2
1/8
1/8
1/2
Square
Square
Square
Square
1 1/4 or 1 1/2 Square
2 1/4 Round
1 1/8 Square
1 1/8 or 1 1/4 Square
1 1/8 or 1 1/4 Square
1 1/4 Square
1 1/4 Square
1 1/2 Square
1 or 1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 or 1 1/2 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
O.E.M. DISC
BLADE
1 1/8 Square
INTERNATIONAL HARVESTER
122
1
132
1
350
1
370
1
470
1
475
1
480
1
485
1
490
1
500
1
501
1
596
1
610
1
630
1
770
1
780
1
JOHN DEERE
105
115
215
225
235
425
1630
100
110
200 & 210 Series
220
230 (Cone Disc)
CENTER
HOLE
310
LIST
1
1
1
1
1
1
1
1
1
1
1
1
1
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Round
Square
Square
Round
1/8 Round
1/2 Round
1/2 Round
1/2 Round
1/2 Round
1/2 Square
1/8 Square
1/8 Square
1/8 Square
1/8 Square
1/8 Square
1/8 Square
O.E.M. DISC BLADE CENTER HOLE LIST
O.E.M.
DISC MODEL NO.
JOHN DEERE
525
1630
1635
1640
2620 (Cone Disc)
2621
2650
2651
2700
BWA
BWF
AXLE
SIZE
CONT…
1
1
1
1
1
1
1
1
2
1
1
1/4
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1/4
1/4
1/4
Square
Round
Square
Square
Square
Square
Square
Square
Square
Square
Square
KENT
6112D
6118D
6323D
6327D
7333D
6540D
7550D
1
1
1
1
1
1
1
KEWANEE
800
1000
1 1/8 Square
1 1/8 Square
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Round
Round
Round
Round
Round
Round
Round
KRAUSE
1952-1956-1960-1970
1968-1969-1979
1965-1966-1976
1480 Series
1480 Series
1900 Series
1950 Series
2100 Series
2200 Series
2400 Series
2400 Series
2700 Series
3100 Series
3200 Series
1498 & 1499
1465-1470
1580
1740-1769
1912-1915-1918
1901-1904-1907
1922-1925-1928
1921-1924-1927
1959-1963-1973
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1/2
1/2
1/2
1/2
3/4
1/2
1/2
1/2
1/2
1/2
3/4
1/2
1/2
3/4
1/2
3/4
1/2
3/4
1/2
1/2
1/2
1/2
1/2
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
O.E.M.
DISC MODEL NO.
LONG
953
1080
1087-88-89
AXLE
SIZE
7/8 Square
1 1/2 Square
1 1/2 Square
MASSEY FERGUSON
MF820
MF620
MF520
MF270
MF21
MF25
MF30
MF720
MF39
MF40
MF52
MF72
MF120
MF220
MF233
MF213
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/4 Square
1/4 Square
1/4 Square
1/2 Square
Square
Round
1/2 Square
1/2 Square
Round
1/2 Square
1/8 Round
1/8 Round
1/8 Square
1/8 Square
1/8 Square
1/8 Square
MILLER
Series I
Series II
1 3/4 Round
1 3/4 Round
NEW HOLLAND
OD100
OD200
OD300
TD100
TD200
1
1
2
1
1
3/4 Round
3/4 Round
Round
3/4 Round
3/4 Round
RHINO
127/167
131
137/187
177
Flex 90
Flex 90B
1
1
1
1
1
1
1/2
1/2
1/2
1/2
1/8
1/4
Square
Square
Square
Square
Square
Square
SUNFLOWER
1210
1211
1230
1231
1320 & 1330
1321
1331
1430 & 1440
1431
1
1
1
1
1
1
1
1
1
1/2
3/4
1/2
3/4
3/4
3/4
3/4
3/4
3/4
Round
Round
Round
Round
Round
Round
Round
Round
Round
2233
O.E.M.
DISC MODEL NO.
AXLE
SIZE
SUNFLOWER
1441
1541
4211
6010
6030
CONT…
1 3/4 Round
1 3/4 Round
1 3/4 Round
1 3/4 Round
1 3/4 Round
SCHAFER
H-3
H-4
355
555
1
1
1
2
TAYLOR WAY
200251-200268
200108-200118
200023
200024
200196-200199
2000051-2000068
200284-200291
200310-200315
2001 Series
200011
200013
200035
200036
200037
200048
200049
2000165
2000166
2000167
1 1/2 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/2 Square
1 1/2 Square
1 1/8 Square
7/8 Square
7/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
1 1/8 Square
7/8 Square
7/8 Square
7/8 Square
VASSAR
DISC EZY
1 1/8 Square
3/4 Round
3/4 Round
3/4 Round
Round
WHITE
250
251
252
253
254
255
256
263
264
265
271
272
273/274
281
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/2
1/8
1/8
1/2
1/2
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Round
Square
2244
COULTERS
TO FIT MOST MAKES OF COULTER UNITS
WAVY
FLUTED
PLAIN
BUBBLE
FLUTED COULTERS
DIAMETER &
THICKNESS
17” x .157”
17” x .157”
17” x .157”
17” x .157”
17” x .157”
20” x .177”
20” x .177”
20” x .177”
20” x .177”
20” x .177”
20” x .177”
22” x .197”
MADE
TO FIT
Oliver
I.H.C.
John
Deere
Ford
Massey
Ferguson
Oliver
I.H.C.
John
Deere
Ford
Massey
Ferguson
IH
IH
OSMUNDSON
PART NO.
F17 157 OL
F17 157 IHC
CENTER HOLE
SIZE (INCHES)
4” Round
31/32” x 1 11/32”
NUMBER OF
BOLT HOLES
4
6
BOLT
HOLE SIZE
17/32”
11/32”
BOLT CIRCLE
DIAMETER
5.25”
3.25”
WEIGHT
PER PIECE
9.90 lbs.
9.90 lbs.
F17 157 JD
F17 157 FD6
2” Round
2 13/16” Round
6
6
13/32”
3/8”
3.50”
4.125’
9.90 lbs.
9.90 lbs.
F17 157 MF
F20 177 OL
F20 177 IHC
3 1/4” Round
4” Round
31/32” x 1 11/32”
4
4
6
15/32”
17/32”
11/32”
4.75”
5.25”
3.25”
9.90 lbs.
15.6 lbs.
15.6 lbs.
F20 177 JD
F20 177 FD6
2” Round
2 13/16” Round
6
6
13/32”
3/8”
3.50”
4.125”
15.6 lbs.
15.6 lbs.
F20 177 MF
F20 177 IHN
F22 197 IHN
3 1/4” Round
1 1/2 Round
1 1/2 Round
4
4
4
15/32”
17/32”
17/32”
4.75”
4.50”
4.50”
15.6 lbs.
15.6 lbs.
20.4 lbs.
FLAT COULTERS
DIAMETER
20” Coulter Blade
22” Coulter Blade
GAUGE
6
6
THICKNESS
DECIMAL
(.197)
(.197)
MM
5
5
BUNDLING
1
1
OSMUNDSON
PART #
20CLTR 6GA 112RD
22CLTR 6GA 112RD
WGT/BNDL
18.5 lbs.
23.0 lbs.
BUBBLE COULTERS
WAVY COULTERS
Oliver
Melroe/Wil-Rich
John Deere
John Deere
John Deere
John Deere Metric
Allis Chalmers
Kinze
Great Plains
TO FIT
AXLE SIZE
1 1/2 rd
1 1/2 rd
8 Waves
W17157 OL
W17157 MLWR
W17157 JD
W17157 JDM
W17157 AC
12 Waves
WT17157 OL
WT17157 MLWR
WT17157 JD
WT16157JD
WT17157 JD
WT17157 JDM
WT17157 AC
WT16157K
WT17157 GP
B17175 OL
B17157 JD
B17157 JDM
B16157 K
B17157 K
17” x .157” Bubble Coulter
to Fit Oliver and others
to Fit John Deere
to fit John Deere Metric,
Yetter, and others
To fit Kinze and others
To fit Kinze and others
9.9 lbs
9.9 lbs
9.9 lbs
7.3 lbs
9.9 lbs
2255
COULTERS
H
Center Hole: 2 1/2”
Bolt Circle: 4”
Bolt Holes: (4) 17/32”
To Fit: Hiniker and others
including Black Machine, Brillion,
DMI, Glencoe/Farmland,
Haybuster, Landoll, Sukup, United
Farm Tools, and Wil-Rich/Noble
IH
Center Hole : 31/32”
x 1 11/32”
Bolt Circle: 3 1/4”
Bolt Holes : (6) 11/32”
To Fit: IH older style and others
IHN
To Fit: IH newer style including
720, 800 and others
Blades Available:
F20177IHN
F22197IHN
P22197IHN
To Fit: John Deere HS and
NU bottoms (non-metric)
and others including Yetter
Blades Available:
B17157JD
WS16157JD
F17157JD
WS17157JD
F20177JD
WT16157JD
W17157JD
WT17157JD
JD
Center Hole: 2”
Blades Available:
F20177H
P18157H
P20177H
Blades Available:
F17157IH
F20177IH
WT17157IH
JDD
Center Hole: 3”
To Fit: John Deere 750 drill and
others
Blades Available:
P18197JDD
JDM
To Fit: John Deere NU 450
Metric bottoms and others
including Yetter
Blades Available:
B17157JDM
WS16157JDM
F20177JDM
WS17157JDM
F22197JDM
WT16157JDM
K
To Fit: Kinze and others
including Black Machine
Blades Available:
B16157K
WS16157K
B17157K
WT16157K
Center Hole: 2”
2266
COULTERS
MLWR
Center Hole:
3 11/16”
Bolt Circle: 5”
MF
Center Hole: 3.172”
OL
Center Hole: 4”
ORT
R
Bolt Circle: 5”
W
Bolt Circle: 4”
To Fit: Melroe/ Wil-Rich
This is a very common
agricultural hub used by Acra
Plant, Ag Systems, Bigham Bros.,
Caldwell-Hamby, DMI, Flexi-Coil,
Harrell, Landoll, Marliss, Monroe/
Tufline, Noble, Sunflower,
Thurston/Blu Jet, Tye, United
Farm Tools,Wiese, Wetherell,
York Agri Prod., and others
Blades Available:
B17157MLWR P18177MLWR
F17157MLWR P20157MLWR
N16138MLWR P24197MLWR
N17157MLWR W17157MLWR
N20177MLWR WS17157MLWR
P18157MLWR WT17157MLWR
To Fit: Massey Ferguson and
others
Blades Available:
F17157MF
F20177MF
To Fit: Oliver/White and others
including Great Plains, KBH,
Marliss, Unverferth, and Yetter
Blades Available:
B17157OL
W17157OL
F17157OL
WS17157OL
F20177OL
WT15157OL
P20177OL
WT17157OL
P18177OL
WT16157OL
WS16157OL
To Fit: Orthman and others
Blades Available:
F20177ORT
To Fit: Rawson and others
Blades Available:
W17197R
WS17197R
To Fit: Wetherell and others
including Alloway, Kongskilde,
Lorenz, Noble, P & H, and
Tebben
Blades Available:
F20177W
P18157W
2277
MOLDBOARD PLOW TERMS
MOLDBOARD PLOW
THE PRIMARY PURPOSE OF THE MOLDBOARD PLOW IS
TO COMPLETELY TURN THE SOIL TO A DEPTH OF FROM
8 TO 14 INCHES. THIS PLACES THE RESIDUE WHICH
WAS ON TOP OF THE SOIL EITHER UNDER THE SOIL OR
MIXED WITH THE SOIL.
THERE ARE TWO BASIC TYPES OF MOLDBOARD
PLOWS:
1) ONE WAY MOLDBOARD PLOW – THE ORIGINAL AND
STILL MOST POPULAR PLOW. SOIL IS ALWAYS
TURNED TO THE RIGHT HAND SIDE.
2) TWO WAY OR ROLLOVER PLOW – HAS TWO SETS OF
BOTTOMS; 1/2 BEING RIGHT HAND AND THE OTHER
1/2 BEING LEFT HAND.
ALL MOLDBOARD PLOWS HAVE THREE PARTS IN
COMMON. THE FRAME, THE BEAM, AND THE FROG.
THE BEAM ATTACHES TO THE FRAME OF THE PLOW
AND THE FROG ATTACHES TO THE BEAM. THE FROG
AND ITS ATTACHED COMPONENTS, THE SHARE, SHIN,
LANDSIDE AND MOLDBOARD, IS THE PART THAT
ENGAGES THE SOIL.
FULL CUT SHARE – CUTTING EDGE EXTENDS
OUTWARDS AT BOTH ENDS OF PLOW SHARE TO CUT
FULL WIDTH THAT SHARE WAS DESIGNED FOR.
NARROW CUT SHARE – BACK, OR REAR CUTTING
EDGE OF PLOW SHARE CUT OFF “SHORTER” TO CUT
LESS THAN FULL CUT PLOW WAS DESIGNED FOR.
SHIN – A REPLACEABLE EXTENSION FOR THE
FRONT OF THE MOLDBOARD WHERE THE MOST WEAR
IS ENCOUNTERED.
LANDSIDE – HEAVY STEEL OR CAST IRON PLATE
BOLTED TO THE FROG ASSEMBLY TO COUNTERACT
THE NATURAL TENDENCY OF THE PLOW TO
CONSTANTLY RUN INTO THE LAND.
WEAR PAD – A PIECE OF STEEL BOLTED TO THE
LANDSIDE WEAR FACE THAT CAN BE REVERSED AND
THEN REPLACED AT LESS COST THAN THE ENTIRE
LANDSIDE ASSEMBLY.
MoldBoard
Shin
Frog
Wear Pad
Share
HOW TO FIND THE CORRECT PLOW SHARE:
1. ASK WHAT MANUFACTURER MADE THE PLOW:
(COLOR)
2. THE LENGTH OF PLOW SHARE OR IF THEY CALL IT A 14-16 OR 18.
INCHES CUT
3. HOW MANY HOLES DOES THE PLOW SHARE HAVE?
THIS LENGTH IN
2288
RIB SHARES
PACKAGED THREE PER CARTON – BOLTS NOT INCLUDED
MODEL
Ford
IHC
Super
Chief
Massey
Ferguson
MODEL
Allis Chalmers
#387 Series
Melroe 992 Bottom
Allis Chalmers 390
Melroe/Star
Case
John Deere
Oliver
Minneapolis-Moline
White Farm
Wil-Rich
OEM
PART #
347750
573307
6528666
6528667
6526827
6526832
6526829
OEM
OSMUNDSON
PART #
PART #
105203A
(OF 12 Rib)
(OF 14 Rib)
7100369
(OF 14-4 Rib)
7100369RS(OF 16 Rib)
7100370
(OF 16-4 Rib)
7100984
(OF 18-5 Rib)
463244
(OI 14 Rib)
463236
463245
(OI 14-4 Rib)
(OI 16 Rib)
*463237
(OI 16-4 Rib)
*463238
660005
475161
660208
*475167
*475823MI
OSMUNDSON
PART #
(AC 387-4 Rib)
(AC 387-18 Rib)
(OM 16-5 Rib)
(OM 18-5 Rib)
(MML 14-4 Rib)
(MML 16-4 Rib)
(MML 18-4 Rib)
(OC 14 Rib)
T39134
(OC 14-4 Rib)
EE14F
(OC 16 Rib)
T39135
(OC 16-4 Rib)
EE16F
RCA8R
(OC 18-5 Rib)
BC452
(OD 14 Rib)
A10225
(OD 14-4 Rib)
BC472A
(OD 16 Rib)
*A10227 (OD 16-4 Rib)
*A14243 (OD-NU-18-5 Rib)
*A40408
A30951 (OD Metric Rib)
(OOMetric
14 Rib)
(OD
Rib)
(OO 14-4 Rib)
RB14R
(OO 16-4 Rib)
(OO 18-5 Rib)
*RCA8R
215804
(OWR 16-4 Rib)
14255
(OWR 18-4 Rib)
(OI 18-4 Rib)
(MF 14 Rib)
(MF 14-4 Rib)
(MF 16 Rib)
(MF 16-4 Rib)
(MF 18-4 Rib)
BOLTS USED
Three 7/16”x 1 1/4” clipped head
Three 7/16”x 1 1/4” clipped head
Four 7/16” x 1 1/4” clipped head
Three 7/16” x 1 1/4” clipped head
Five 7/16” x 1 1/4” clipped head
One 1/2” x 1 3/8” &
One 1/2” x 1 3/8” &
One 1/2” x 1 3/8” &
WGT/CTN
42 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52
42
42
47
47
52
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
BOLTS USED
One 1/2” x 1 3/8” & Three 7/16” x 1 1/4” clipped head
One 1/2” x 1 3/8” & Four 7/16” x 1 1/4” clipped head
One 1/2” x 1 3/8” & Two 3/8” x 1 3/16” clipped head
WT/CTN
48 lbs.
57 lbs.
59 lbs.
60 lbs.
42 lbs.
47 lbs.
52 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
One 1/2”
x 1 3/8”
Two
7/16” head
x 1 1/4” clipped head
Three
16 mm
x 40&mm
clipped
42
52 lbs.
lbs.
42 lbs.
47 lbs.
52 lbs.
47 lbs.
52 lbs.
*Available in Left Hand
HARD SURFACE RIB SHARES
BREAKER BAR ADDED FOR A LONGER LIFE AND TO PREVENT WASHING. HARD FACED
TO GIVE THREE TO FIVE TIMES LONGER WEAR IN THE FIELD. DESIGNED TO LESSEN DOWN TIME FOR MAINTENANCE SO
MORE TIME CAN BE SPENT PLOWING. TO ORDER HARD FACED, ADD HF TO THE PART NUMBER.
2299
ROCK SHARES
MODEL
Ford
IHC
Super
Chief
Massey
Ferguson
MODEL
Allis Chalmers
#387 Series
Allis-Chalmers
Melroe 992 Bottom
Allis Chalmers 390
Melroe
Case
OEM
PART #
347750RS
573307RS
325614RS
344870RS
6528666RS
6528667RS
6526827
6526832
6526829
EE14F-RS
EE16F-RS
John Deere
Oliver
Minneapolis-Moline
White Farm
Wil-Rich
OEM
OSMUNDSON
PART #
PART #
(OF 14-RS)
7100369RS
(OF 14-4 RS)
(OF
16 RS)
*7100370RS
(OF 16-4 RS)
*7100984RS (OF 18-5 RS)
463244RS
(OI 14 RS)
463236RS
463245RS
(OI 14-4 RS)
(OI 16 RS)
*463237RS
(OI 16-4 RS)
*463238RS (OI 18-4 RS)
660005RS
(MF 14 RS)
475161RS
(MF 14-4 RS)
660208RS
(MF 16 RS)
*475167RS (MF 16-4 RS)
*475823MIRS (MF 18-4 RS)
OSMUNDSON
PART #
(AC 387-4 RS)
(AC 387-18 RS)
(OA 14-4 RS)
(AC 16-4 RS)
(OM 16-5 RS)
(OM 18-5 RS)
(MML 14-4 RS)
(MML 16-4 RS)
(MML 18-4 RS)
(OC 14 RS)
(OC 14-4 RS)
(OC 16 RS)
(OC 16-4 RS)
(OC 18-5 RS)
(OD 14 RS)
(OD 14-4 RS)
(OD 16 RS)
(OD 16-4 RS)
(OD-NU-18-RS)
(OD Metric RS)
(OD Metric RS)
RCA8R-RS
BC452RS
A10225RS
BC472ARS
*A10227RS
*A14243RS
*A42408
A30951
RCA4R (OO 14 RS)
(OO 14-4 RS)
*RCA6R (OO 16 RS)
(OO 16-4 RS)
*RCA8R
(ON 18-5 RS)
215804
(OWR 16-4 RS)
14255
(OWR 18-4 RS)
BOLTS USED
Five 7/16” x 1 1/4” clipped head
WGT/CTN
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
One 1/2” x 1 3/8” &
One 1/2” x 1 3/8” &
One 1/2” x 1 3/8” &
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52
42
42
47
47
52
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
BOLTS USED
Three 16mm x 40mm clipped head
WT/CTN
47 lbs.
52 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
42 lbs.
47 lbs.
52 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
42 lbs.
42 lbs.
47 lbs.
47 lbs.
52 lbs.
57 lbs.
42
42
47
47
52
47
52
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
*Available in Left Hand
THE BODY OF THE ROCK SHARE IS 3/8” THICK. THE NOSE OF THE ROCK SHARE IS THICKENED THROUGH OUR HOT FORGED UPSET
OPERATION. THE UPSET NOSE GIVES LONGER LIFE IN ALL TYPES OF SOIL AND WILL RESIST BREAKING WHEN USED IN ROCKY SOIL.
THIS SHARE IS AVAILABLE WITH 3, 4, OR 5 HOLES TO FIT ALL STANDARD PLOWS WITH THE LIKE NUMBER OF HOLES.
3300
PLOW SHARE INTERCHANGE INFORMATION
NOTE: THE ITEMS LISTED BELOW ARE A REASONABLE INTERCHANGE SUBSTITUTE. THIS DOES NOT MEAN AN
ALWAYS PERFECT FIT, BUT SATISFACTORY.
Allis-Chalmers Shares
“OA” Series Shares (Will not Interchange with
#375, #387, #390 or #392 plows):
OA14-4 will interchange with a 3-hole Use AC Shin
OA16-5 (5-hole) interchanges with 3 and 4-hole –
Use AC Shin
Other “OA” Interchanges
1. Can use OA Series 14-inch on 16-inch plow. Hole
punchings are the same.
2. OA16-5 Short – Not Available – Use OA14-4
Rock Share.
“AC” 375 Series Share
AC14-4
For the AC#375 Plow
Bottom Only
AC16-4
All models since 63
AC14-4 & AC16-4 will interchange
Use AC375
Shin
“AC” 387 Series Share
AC387-4RS
For the #387 Plow Use AC387 Shin
Bottom only.
AC387-18RS
Use AC387 Shin
AC390-16-5RS Use OM16-5RS
Use O Shin W
(Melroe in line)
AC390-18-5RS Use OM 18-5RS
Use O Shin W
(Melroe)
AC392 16-18 5-hole interchange Use Melroe 992
drop front hole.
Will interchange with Melroe 987
Case Shares
14-inch and 16-inch bottoms
Use C Shin
Case Share Interchanges
1. 4-hole will fit 3-hole
2. 14-inch will fit 16-inch plow
3. For OC16-4 Short – Use OC14-4
Use O Shin W
4. OC18-5 will interchange with ON18-5: O Shin W
5. DMI 16 & 18 – 4-hole
Use O Shin W
Ford Shares
14-inch and 16-inch bottoms
Use F Shin
Ford Share Interchanges
1. 4-hole will fit 3-hole
2. 14-inch will fit 16-inch plow
3. For OF 16-4 Short – Use OF14-4
4. For 18” Bottom – Use OF18-5RS
5. Ford 150, 151, 152 – Use Oliver/White 16” or 18”
Rock Share
Massey-Ferguson Shares
“MF” Share Interchanges for HDN bottom)
1. MF14 interchanges with OI14
Use MF Shin
(3-hole only) 1965 models and later
2. MF14 and MF16 will interchange
Massey Ferguson cont…
3. MF14-4 and MF16-4 will interchange
4. For MF16 Short – Use MF14
5. For MF16-4 Short – Use MF14-4
International Shares (IHC)
OI Interchanges
1. OI 14 will interchange with MF14
Use IH Shin
2. OI 14-4 and OI 16-4 will interchange
3. OI 14 and OI 16 will interchange
4. For OI 16-4 Short – Use OI 14-4
5. For OI 16 Short – Use OI 14
6. OI 18-4 Rock Share – Now available Use IH Shin
for the #700 Series Plow
7. OI 20-4 Rock Share – Use OI 18-4 Rock Share
John Deere Shares
OD14 and OD14-4
OD16 and OD16-4
Use D Shin 14
Use D Shin 16
“NU” Series Shares
16-inch Bottom
Use OD16-4
Rib or Rock Share
18-inch Bottom
20-inch Bottom
Use D-NU
Shin (Fits
16,18,&20”)
Use OD NU18-5 Rock Share
Use OD NU18-5 Rock Share
Oliver Shares
“OO” Interchanges
1. OO and MM will interchange – Both for MelroeReiten 14-inch and 16-inch
2. All 4-holes will fit 3-holes
3. MM 14-inch and 16-inch low bottoms use O Shin W
“ON” Series Shares
ON 18-5 Rock Share
For Oliver #919
Use O Shin
Speedex High
919
Speed Plow Bottom
“ON” Interchange
1. ON 16-5 will interchange with ON18-5
2. ON 18-5 will interchange with OC18-5
Minneapolis-Moline Shares
1. All MM 14-4 and MM 16-4 will interchange
2. All MM 14-4 and MM 16-4 will interchange with the
National Plow
3. MM and OO will interchange on older models – both
interchange with the Melroe-Reiten 14 and 16 inch
David Brown Shares
1. Use the MM Share
Speedco Shares
OF Rib Share
Use F Shin
Melroe 992 Series Shares (Only)
1. OM 16-5 for 992 Series 16”
2. OM 18-5 for 992 Series 18”
Use O Shin W
Use O Shin W
3311
PLOW SHARE CROSS REFERENCE SHEET
OUR SHARES WILL FIT THE FOLLOWING ORIGINAL EQUIPMENT MANUFACTURERS PART NUMBER AND OTHERS IN
EITHER THE RIB OR ROCK PATTERNS.
OSM NO.
Original Equipment Manufacturer’s
Part Nos. (O.E.M.)
For Allis-Chalmers Plows
OA14-4
325614 338476
326082 344865
326074 344186
344184 344867
OA16-5
325552 326084
344866 344192
344182
325550
326080
244188
344268
326826
344868
326062
326086
344190
#375 Series
AC14-4
344869 341395 341394
AC16-4
344870 341396 347007
For Ford Plows
OF12
105204
OF14
105206
201192
OF16
105208
201194
OF14-4
201573
OF16-4
201575
OF18-5
201589
EE14
ESH14K
ESH14K
EESH14
EE16
EE16A
RCA8R
EE14H
EE14A
EE14A
EE14FRS
EE16H
EE16AH
EESL14
EE14AH
EE14AH
EESL16
EESH16
105203 104420
105205 104421
105325
105326
105207 104422
105327
201579 201585
201581 201587
201596
201586
201588
For John Deere Plows
OD14 BC452
BC454
A10002A A10102A
A10006A A10106A
OD16 A10003A A10103A
A10007A A10107A
BC472A
BC474A
CY103A
A10001A
A10005A
CY102A
A10004A
A10008A
BC453A
Original Equipment Manufacturer’s
Part Nos. (O.E.M.)
For John Deere Plows (continued)
OD14-4 A10021A A10022A A10025A
A10221A A10222A A10226A
A10322A A10325A A10327A
CY104A
OD16-4 A10023A A10024A A10027A
A10223A A10224A A10227A
A10323A A10324A A10327A
A14027
CY105A
For Minneapolis-Moline Plows
MM14-4 20P1389
20P1391 20P2369
MM16-4 20P1390
20P1392 20P2370
#387 Series
AC387-4
347750 347751 347749
AC387-18
573307
For Case Plows
OC14
E14
EE14K
OC14-4
E14A
EE14KA
OC16
E16
OC16-4
E16A
OC18-5
RD18
OSM NO.
A10101A
A10105A
A10104A
A10108A
BC455A
For Oliver Plows
OO12
RFB2S
OO14
RFB4R
OO16
R16R
OO14-4 RR14R
OO16-4 RR16R
ON18-5 RCA8R
R12S
R14S
RFB6R
RR14S
RR16S
R12R
R14R
R16S
For Massey-Ferguson Plows
MF14
661677M91 661679M91
47513OM1 475134M1
660014M91
MF16
661680M91 661682M91
661688M91 475137M1
660874M91
MF14-4 475161M1 475162M1
MF16-4 475167M1 475160M1
MF18-4 475823M1
For International Plows
OI14
52383R51 524173R31
463248R1 526773R3
OI16
523836R51 524174R31
463246R1 526774R3
OI14-4 462222R11 462226R11
4632401
463252R1
OI16-4 462223R11 462227R11
463241R1
481960R1 481964R1
OI18-4RS 463238RS 463254R1
A10026A
A10321A
A14025
A10028A
A10228A
A10328A
20R46
20R47
RFB4R
RFB6S
660005M1 660873M91
661095M91 661687M91
475135M1
660208M1
661116M91
660210M91
463228R1
463244R1
463229R1
463245R1
463232R2
470955R1
463433R1
463253R1
492081R1
481961R1
463236R1
481959R1
463237R1
470957R1
481965R1
3322
REFER TO PAGE 30 FOR PLOW SHARE
INTERCHANGE INFORMATION.
3333
REFER TO PAGE 30 FOR PLOW SHARE
INTERCHANGE INFORMATION.
3344
SHINS
MOLDBOARD SHINS – HEAT TREATED – SIX PER CARTON –
CLIPPED HEAD BOLTS REQUIRED
Bottom Size &
Thickness of
Shin
Wgt./Ctn
14-16-18 x 5/16
14-16-18 x 5/16
24 lbs.
24 lbs.
14 x 5/16
16 X 5/16
24 lbs.
24 lbs.
14 x 5/16
14 x 5/16
16 x 5/16
16 x 5/16
NU 16” – 18”
NU 16” – 18” LH
18l x 5/16
22 lbs.
22 lbs.
24 lbs.
27 lbs.
26 lbs.
26 lbs.
25.5 lbs.
Fits All Models
Fits All Models
22 lbs.
22 lbs.
Super Chief
14-16-18 x 5/16
24 lbs.
Super Chief
14-16-18 x 5/16
24 lbs.
12-14-16-18 x 5/16
12-14-16-18 x 5/16
24 lbs.
24 lbs.
14-16-18 x 5/16
14-16-18 x 5/16
16-18 x 5/16
21 lbs.
21 lbs.
24 lbs.
12-14-16-18 x 5/16
12-14-16-18 x 5/16
14-16-18
21.5 lbs.
21.5 lbs.
24 lbs.
Osmundson
Part #
OEM
Part #
AC 375
AC 387
340971
347649
C Shin
C Shin
T-60002
T-60003
EXB14-EXC14
EXB16-EXC16
D Shin 14
D Shin 14 LH
D Shin 16
D Shin 16 LH
D NU Shin
D NU Shin LH
D Shin Metric
A14700
A14701
A14702
A14703
A15594
A15606
A30129
HS314-324-354-434-444-534 & 544
HS314-324-354-434-444-534 & 544
HS316-326-356-436-446-536-546 & SD546
HS316-326-356-436-446-536-546 & SD546
NU1036-46-48
NU 1036-46-48 LH
NU400-NU450 “Metric”
F Shin
F Shin LH
201344
201345
General Purpose, Clay, Sod, & Stubble
General Purpose, Clay, Sod, & Stubble
Plow Bottom Series
To Fit Allis-Chalmers
375
387
To Fit Case
To Fit John Deere
To Fit Ford
To Fit I.H.C. Super Chief
IH Shin
IH Shin LH
522325R
488266R
55075C
464595
To Fit Massey Ferguson (N-Bottom)
MF Shin
MF Shin LH
660008M1
661584
“N” & “N” Heavy Duty
O Shin W
O Shin W LH
MEL Shin
6522182
General Purpose (Oliver Style Bottom)
General Purpose (Oliver Style Bottom)
987 Series (Allis Chalmers 387 Bottom)
O Shin W
O Shin 16 LH
O919 Shin
EP7490C
217404BS
219279B
To Fit Melroe
652091
To Fit Oliver White/DMI
619-719-519-419 & 219
619-719-519-419 & 219
919
3355
MOLDBOARDS
HEAT
TREATED FOR LONGER WEAR. HEATTREATING THE MOLDBOARD LEAVES THE WEAR
THUS
ENABLING
THESE
FACE
HARDER,
MOLDBOARDS TO “SCOUR” IN MOST SOIL
CONDITIONS.
Osmundson
Part #
OEM #
AC347966
347966
To Fit Series
Bottom
Size
Wgt.
387
14” – 16”
24 lbs.
EXB-EXC – 16”
16”
27.07 lbs.
AC
CASE
Case EX16
T600001/T21451
Note: All Case plow series 400, 500, 7000, & 8000 will require the use of Oliver/White Farm
Equipment Moldboards.
JOHN DEERE
JD HS314
JD HS316
JD HS546 (LH)
NU-1036 (JD-14885)
NU-1046 LH
NU-1048 (JD-15673)
NU-1048 LH
32209
A20700/BA1022A
A20702/BA1024A
A20703
A15596
A15607
A17431
A17432
32209
F 104404
F 104409
F104412
104404
104409/201277/251440
104412/201278/251442
HS314,324,HS354,434,444
HS316,326,HS356,436,446
HS316-326,HS356-436,446
NU-1036-1046
NU-1036-1046 (LEFT)
NU-1048
NU-1048 (LEFT)
METRIC NU 450
14”
16”
16”
16”
16”
18”
18”
14”
24.49 lbs.
29.20 lbs.
24 lbs.
33 lbs.
33 lbs.
37 lbs.
37 lbs.
39 lbs.
12”
14”
16”
23.5 lbs.
26.70 lbs.
29.94 lbs.
FORD
General Purpose
General Purpose
General Purpose
Note: All Ford plow series 150, 151 & will require the use of Oliver/White Farm Equipment
Moldboards.
IHC SUPER CHIEF
IHC 462313
IHC 462314
IHC 464603 (LH)
462313 R
462314 R, 488265 R,
58996 C 132000 C-1
464603 R
Super Chief (High Speed)
14”
28 lbs.
16”- 18”-20”
18”
30 lbs.
33 lbs.
14”
16”-18”
16”-18”
27 lbs.
30 lbs.
30 lbs.
14”
16”
18”
26 lbs.
30 lbs.
35 lbs.
MASSEY-FERGUSON
MF 660022
MF 660204
MF 661651 (LH)
660022M-91
660204-M1
WHITE FARM / OLIVER / DMI
R419-R619-14
R419-R619-16
R619-18
R419-14
R419-16 (DMI)
R619-18
R419-R619
R419-R619
R619
3366
LANDSIDES AND WEAR PADS
Osmundson
Part #
OEM #
AC 868 W
AC 819 W
349819
Bottom Series
Allis-Chalmers
386-370-387-392
386-370-387-392
Position
Weight/
Ctn
Wear Pad for 819W
All (Offset)
20 lbs.
44 lbs.
Case
C7000W
T51968
Case 7000 Series
18” General Purpose Blanchat Plow
BA10979
AA15262
A27862
AA16493
AA16494
AA15262
AA15263
HS Series (All)
HS314-HS316
Metric
HS or NU Series
HS or NU Series
HS or NU Series
HS or NU Series
107980/251448
107981/251449
108427
108429
100601
General Purpose (After 1958
General Purpose (After 1958)
General Purpose
General Purpose
General Purpose (Prior to 1958)
50 lbs.
Offset
John Deere
JD
JD
JD
JD
JD
JD
JD
979
300
862
493
494
262
263
W
W
W
W
W
W
W
Rear
Heel
Wear Pad
Inner Plate
Inner Plate (LH)
Wear Pad
Wear Pad (LH)
34
20
34
27
27
23
24
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
Front
Rear
Front LH
Rear LH
Rear
35
59
35
59
82
lbs.
lbs.
lbs.
lbs.
lbs.
All bottoms Wear Pad LH
Inner Plate LH
All Bottoms Wear Pad
Inner Plate
22
45
22
45
lbs.
lbs.
lbs.
lbs.
Inner Plate
Wear Pad
Front LH
Rear LH
60
22
54
81
lbs.
lbs.
lbs.
lbs.
Ford
F 980 W
F 981 W
F 980 WLH
F981 WLH
F 601 W
IHC Super Chief
IHC 058UV LH
IHC 05957 LH
IHC 058UV
IHC 59057
59058
59058
59057
Super
Super
Super
Super
Chief
Chief
Chief
Chief
Massey Ferguson
MF 475 W
IH 058UV
MF 580 LH
IH 058UV LH
475153M1
475937M1
661580M1
661581M1
O 270 W
O 270 W-A
218270B
1012835
“N” Series-Heavy duty & high speed
“N” Series-Heavy duty & high speed
“N” Series
“N” Series
White Farm/Oliver
419-425-619-625
419-425-619-625
Offset Old Style
Offset New Style
*Note 058UV may be used on newer White plows with 270 W-A offset landside.
56 lbs.
57 lbs.
LANDSIDE REFERENCE
3377
TO FIT ALLIS CHALMERS
854W Allis Chalmers
(1) 9/16” x 3” Machine Bolt
(1) 9/16” x 3 1/4” #3 PH Bolt
422W Allis Chalmers
(2) 1/2” x 1 1/2” CH Bolts
The
819W-868W
back plate/wear pad
assembly can be
used to replace the
older 819W on 387,
390 and 392 series
plows
819W Allis Chalmers
(2) 9/16” x 3” #3 PH Bolt
Landside is offset 1/2”
868W Allis Chalmers
(2) 2 1/2” x 1 1/2”
CH Bolts
TO FIT CASE
590W Case
(1) 3/8” x 1 1/4” CH, (1) 1/2” x 3 CH
(1) 5/8” x 2 1/2” #3 PH Bolt
727W Case
(1) 3/8” x 1 1/4” CH, (1) 1/2” x 3” CH
(1) 5/8” x 2 1/2” #3 PH Bolt
7000W
(1) 3/8” x 1 1/2” #3 PH Bolt
(1) 5/8” x 2 1/2” #3 PH Bolt
(1) 1/2” x 3” #3 PH Bolt
(1) 7/16” x 1 3/4” #3 PH Bolt
3388
TO FIT JOHN DEERE
146W John Deere
(2) 1/2” x 3” RHCH, (1) 7/16” x 2” RHCH
A47716W John Deere
(1) 5/8” x 2” #3 PH
(1) 5/8” x 3” #3 PH
979W John Deere
(2) 1/2” x 3” RHCH
Use with 300 W heel
300W John Deere Heel
(1) 1/2” x 1 1/2” RHCH,
(1) 7/16” x 2” RHCH
862W John Deere Metric Wear Pad
OEM# A27862
(1) 5/8” x 2” #3 PH
(1) 5/8” x 3” #3 PH
The 493-262 back plate/wear
pad assembly can be used to
replace the older 146W front,
979 rear landside. Use the
493/262 for front & rear both.
493W John Deere
(2) 1/2” x 2 1/2” #3 PH
Use with 262W
262W John Deere
(1) 7/16” x 1 1/2” RHCH, (1) 7/16” x 2” RHCH
Use with 493W
3399
TO FIT DMI
4256W Wear Pad
(1) 7/16” x 1 3/4” PH, (1) 7/16” x 2 1/2” PH
4253W Inner Plate
(A) 5/8” x 3” PH, (B) 7/16” x 1 1/2” CH
TO FIT FORD
601W Ford
(1) 7/16” x 1 1/2” RHCH, (1) 7/16” x 2” RHCH
(1) 5/8” x 3” #3 PH, (2) 5/8” x 2 1/2” #3 PH
980W Ford
(1) 7/16” x 2” RHCH, (1) 5/8” x 3” #3
981W Ford
(1) 7/16” x 2” RHCH
(1) 5/8” x 3” #3 PH, (2) 5/8” x 2 1/2” #3 PH
600 W Ford
(1) 7/16” x 1 1/2” RHCH, (1) 7/16” x 2” RHCH
(1) 5/8” x 3” #3 PH
4400
TO FIT I.H.
The 59057/058UV back
plate/wear pad assembly
can be used to replace
the older 342 front, 343
rear landside by using
the 59057/058UV for
front and rear both.
058UV
(1) 7/16” x 1 1/2” CH, (1) 7/16” x 2” CH
Use with 59057 Inner Plate
661 W I.H.
(1) 7/16” x 1 1/2” CH, (1) 7/16” x 2” CH
Use on front or rear
342W I.H.
(2) 7/16” x 1 1/2” CH
343W I.H.
(2) 7/16” x 1 1/2” CH
59057 I.H.
A - 7/16” x 1 1/2” CH (1), B - 1 1/4” Hole (1)
C – 12” Hole (2)
Use with 058 UV Wear Pad
184W I.H.
(1) 7/16” x 1 1/2” CH, (1) 7/16” x 2” CH
4411
TO FIT M.F.
002W M.F.
(1) 7/16” x 1 1/2” CH, (1) 7/16” x 2” CH
(1) 5/8” x 3” PH
475 M.F.
A – 5/8” x 3” PH, B – 7/16” x 2” PH
C – 7/16” x 2 1/2” PH, D – 1/2” Hole
Use with 058UV Wear Pad in combination to
replace the one piece cast OEM Part No.’s
475153M1 & 475183M1
003W M.F.
(1) 7/16” x 1 1/2”, (1) 7/16” x 2” CH
(1) 5/8” x 3”, (2) 5/8” x 2 1/2” #3 PH
The 475W/058 UV back plate/wear pad
assembly may be used to replace the
older 002W front and 003W rear
landside. Use the 475/058 UV for front
and rear both.
058 UV
(2) 7/16” x 1 1/2” CH
Use with 475W Inner Plate
4422
TO FIT MELROE
819W Allis Chalmers
(2) 5/8” x 3” #3 PH Bolt
Landside in NOW flat, not offset.
6000W Melroe Inner Plate
(1) 7/16” x 1 3/4” PH Bolt
(2) 1/2” x 3 1/2” PH Bolt
868 Allis Chalmers
(2) 1/2” x 1 1/2” CH bolts
(For 819W Landside Plate)
847 Melroe
(General Purpose)
(1) 7/16” x 2” PH
(1) 7/16” x 2 1/2” PH
TO FIT
MINNEAPOLIS MOLINE
638W
4433
TO FIT OLIVER/WHITE
270W Oliver (offset)
(2) 7/16” x 1 1/2” RHCH, (1) 7/16” x 2” RHCH
(1) 5/8” x 3” #3 PH, (1) 5/8” Hex Jam Nut
379 Innerplate
(1) 5/8” x 3” PH
(1) 1/2” x 2 1/2” PH
(1) 1/2” x 1 3/4” PH
270W-A Oliver (offset)
Holes A & B are punched to accommodate a
5/8” #3 PH bolt
5/8” x 3”, (1) 5/8” x 2 1/2” & (1) 5/8” 2”
#3 PH bolts
(1) 7/16” x 2” RHCH & (1) 5/8” Jam Nut
919 Wear Pad
(2) 5/8” x 2 1/2” PH
TO FIT WIL-RICH
4256W Wear Pad
(1) 7/16” x 1 3/4” PH
(1) 7/16” x 2 1/2” PH
4253W Inner Plate
(A) 5/8” x 3” PH, (B) 7/16” x 1 1/2” CH
20036W Wil-Rich
(1) 5/8” x 3” PH Bolt
SUB SOILERS (V-RIPPER)
Part #
Booted Point
41B2512BT
41B2510B
41B2511B2
41B1511BR
41B2509BH
41B2508IH
41B2512JD
41B2008FC
41B2512JD
41B1511K1
41B2511K2
41B2008KA
41B2512L
41B2512MW/SF
41B2012PK
41B2510PT
41B2010WA
41B2010WA2
41B2512WT
41B2013Y
4444
OEM #
Description
93397
Brent CPC 2000 w/boot, 1” x 2 1/2” x 12”
Brillion w/boot, 1” x 2 1/2” x 10”
Brillion Land Comm. w/boot, 1” x 2 1/2” x 11”
Brown w/boot, 1” x 1 1/2” x 11”
Bush Hog w/boot, 1” x 2 1/2” x 9/12”
Case/IH w/boot, 1” x 2 1/2” x 9 1/2”
Deere w/boot, 1” x 2 1/2” x 12”
Forrest City w/boot, 1” x 2” x 8”
Glencoe w/boot, 1” x 2 1/2 x 12”
Kelley w/boot, 1” x 1 3.4” x 11”
Kelley w/boot, 1” x 2 1/2” x 11”
Kewanee w/boot, 1” x 2” x 8”
Lely w/boot, 1” x 2 1/2” x 12”
M & W, Sunflower, 1” x 2 1/2” x 12”
Paulk w/boot, 1” x 2” x 12”
Pittsburgh w/boot, 1” x 2 1/2” x 10”
W & A w/boot, 1” x 2” x 10”
W & A w/boot, 1” x 2” x 10”
Watts w/boot, 1” x 2 1/2” x 12”
Yetter w/boot, 1” x 2” x 13”
03-1K505
AA21507
2500-6015
Roll Pin
9/16” x 2”
1/2” x 2”
3/8” x 2”
3/8” x 2”
3/8” x 2”
5/16” x 2”
5/16” x 2”
Wgt.
9.0 lbs.
8.0 lbs.
8.5 lbs.
5.6 lbs.
7.0 lbs.
8.0 lbs.
9.0 lbs
6.5 lbs.
9.0 lbs.
5.0 lbs.
8.5 lbs.
6.0 lbs.
9.0 lbs.
9.0 lbs.
7.5 lbs.
8.0 lbs.
6.5 lbs.
6.5 lbs.
9.5 lbs.
8 lbs.
Formed Ear Point
7709545IH
77MW11000
954530R2
IHC, 1/2” x 2” x 8” to fit #10 shank
M & W, 3/4” x 2 1/2” x 12”
2.2 lbs.
5.6 lbs.
Bolt On Point
412514BJ
412013JD
412013JD
412512JD
412013T
412013JD
412512L
412512JD
48010014
48010014
48010014
A17994
A17994
Q30681
010006
A17994
010014
010014
010014
Blu-Jet, 1” x 2 1/2” x 13 1/2”
Case. 1” x 2” x 13”
Deere, 1” x2” x 13”
Deere, 1” x 2 1/2 x 12”
Taylor/Pittsburgh, 1” x 2” x 13”
Landoll, 1” x 2” x 13”
Lilliston, 1” x 2 1/2" x 12”
Kelley, 1” x 2 1/2" x 12”
Brillion
Landoll, 3/4" x 2 1/4" x 17 1/4"
Tebben
Bolt Size
5/8” hex
1/2" p.h.
1/2" p.h
5/8” hex
5/8” hex
1/2" p.h
1/2" p.h
5/8” hex
5/8” hex
5/8” hex
5/8” hex
9.5 lbs
7.0 lbs
7.0 lbs
8.5 lbs
7.0 lbs
7.0 lbs
8.5 lbs
8.5 lbs
10 lbs
10 lbs
10 lbs
4455
SHIPPING
All shipments from Osmundson Mfg. Co. are F.O.B. Perry, Iowa. When placing an order please inform us of the freight
lines you wish to use or if you want to use United Parcel Service (UPS) which has a variety of shipping options to meet
your needs.
WARRANTY
Plow Shares
100% replacement on rock & rib shares up to 1/2” wear on the cutting edge. No warranty left after 1/2”
wear on cutting edge.
Disc Blades
100% replacement on edge breakage or bending up to 1” diameter wear. No warranty left after 1”
diameter wear. No guarantee on center hole breakage.
Other
Warranty covers all other tillage tools against breakage under normal use up to 1/2” wear on any cutting
edge. ANY ALTERATION OF OSMUNDSON PRODUCTS WILL VOID WARRANTY.
Parts listed in this catalog are replacement parts, made to operate satisfactorily on implements specified, but are not
offered as products of the original equipment manufacturer or its affiliates. Part numbers used for purposes of showing
interchange and replacement.
RETURNS OF MERCHANDISE
Any merchandise purchased from Osmundson Mfg. Co. that is in saleable condition and shown in the Osmundson Mfg.
Co. current catalog will be accepted for return. The freight on this merchandise must be prepaid. The returned
merchandise will be subject to a 15% restocking charge. All returns must have the expressed approval of Osmundson
Mfg. Co. prior to shipment.
SHIPMENT DAMAGES
Under the terms of sales, when the shipment is released to the carrier it becomes the property of the purchaser. Damage to
shipments beyond the F.O.B. point is the responsibility of the carrier, and any claim for damage is to be initiated by the
purchaser with the carrier.
OBVIOUS CONTAINER DAMAGE
Shipments with damaged container(s) are to be brought to the attention of the carrier at the time of delivery.
CONCEALED DAMAGE
Shipments should be opened promptly upon receipt and thoroughly inspected. Concealed damages should be reported to
the local agent of the delivering carrier immediately.
The container(s) and contents of damaged shipments must be made available to the carrier for inspection.
Damaged shipments are not to be returned without prior authorization. Please write or call the factory to obtain
authorization (RMA) number. 1-800-824-6661
SHIPMENT SHORTAGES
Each shipment should be examined promptly by the purchaser upon receipt, all claims for losses or shortages must be
made to Osmundson Mfg. Co. WITHIN SEVEN (7) DAYS OF RECEIPT OF SHIPMENT.
4466
CUSTOMER SERVICE- 800-824-6661 OR
FAX-515-465-2126
EMAIL AT [email protected]
P.O. BOX 158
PERRY, IOWA 50220
WWW.OSMUNDSON.COM

Osmundson Catalog - John Day Company

Transcription

Similar documents

AGCO10001_Tillage_CatCvr-FINAL.indd

Zaumzeug - Herzlich Willkommen auf Heavy-Horse

Özgeçmiş - Dr. Yerebakan

AK47 / AK74 / AMD 65 / FPK

Group b_L-M