FPI Brochure
Transcription
FPI Brochure
FPI 80P Output Power Rating rpm 1500 1800 Prime Frequency 50 Hz 60 Hz Voltage 400 480 Kva 80 92.0 Standby *** Kw 64.4 73.8 Kva 88 102.0 Switch able speed 1500/1800 rpm The above kW rating are at 0.8 pf Guarantied within condition equivalent to those specification in ISO 8528-1,ISO 3046-1 and BS 5514-1. * Prime power rating of the generating set is where a varible load and unlimited hours usage are applied on the generating set with an average load factor of 80% of the prime rating over each 24 hours period. Nothing that a 10% overload is availble for 1 hour in every 12 hours operation ** Standby power rating of the generating set is where a varible load limited to an annual usage up to 500 hours is applied, with 300 hours of which may be continous running. Noting that no overload is permitted Engine Technical Data Engine Make and Model Cylinder Aspiration Combustion System Displacement Governor Emissions Regulation Electrical Starting System Perkins 1104A-44TG2 4 Vertical In-Line Turbo charge, air to air changecooled Direct Injection 4.4 Liters Mechanical (Optional Electronic) TA Luft 12 Volt Starter Motor and 12 Volt 65 Amp Alternator DC Output Air System Air Filter Type Combustion Air Flow Cm/min(cfm) Prime Standby Max Air Filter Intake Restriction Dry Element (Replaceable) 50 Hz 4.8 (169.5) 5.14 (181.5) 8.0 kpa 60 Hz 6.2 (218.9) 6.5 (229.5) 8.0 kpa Fuel System Fuel Filter Type Recommended Fuel Engine Speed Standby Fuel Consumption Prime Power l/hr(US gal/hr) 75% of Prime Power 50% of Prime Power Fuel Tank: Open / Close Acropolis (Replaceable) Class A2 Diesel 1500 rpm 22.6 20.6 16.9 11.3 224 A / 240 A 1800 rpm 25.5 23.7 18.7 13.5 Lubrication System API-CG4 / CH4 SAE 15W40 (-10OC to 50OC Ambient Temperature) 8.0 L 7.0 L Spin-On (Replaceable) Water Lube Oil Lube Oil Capacity Oil Pan Oil Filter Type Oil Cooling Method Cooling System Coolant Capacity Cooling System Cooling Fan Air Flow m3/min (cfm) Heat Radiation to Room Prime Standby 17 L Mounted Radiator, Water Cooled 89.0 (3143.0) 111.0 (3919.9) 50 Hz 60 Hz 13.0 kW 14.0 kW 14.0 kW 15.0 kW Exhaust system Grade Size QTY Exhaust gas flow Prime m3/min (cfm) Standby Max Allowable Backpressure Silencer Exhaust Gas Max Temperature Prime Standby Industrial 3" 1 12.5 (441.4) 13.3 (469.6) 10 kpa 50 Hz 555OC 580OC 15.0 (529.7) 15.85 (559.7) 15 kpa 60 Hz 535OC 560OC Kw 71.0 81.7 FPI 80P Alternator Technical Data Stamdford / or L.S Model Number No. of Poles Number of terminals (leads) A.V.R & Excitation Regulation Ingress Protection Insulation Class TIF THD at Full Load % THD at No Load % Cooling Air flow-@50 Hz m3 / min (cfm) Cooling Air flow-@60 Hz m3 / min (cfm) UC1224G 4 12 SX 460 ± 1.5% IP-21 H <40 1.6 / 1.8 2.9 / 3.0 19.3 (681.57) 23.0 (812.23) Output Voltage 50 Hz V kVA kW 60 Hz 380 85 68 400 85 68 415 85 68 440 70 55 415 95 76 440 102 81.6 460 102 81.6 480 102 81.6 360.1 24.70 8.2 325 22.3 7.4 301.9 20.70 6.9 221.2 15.20 5.00 404.9 27.8 9.2 386.8 26.5 8.8 353.9 24.3 8.1 325 12.3 7.4 170 210 250 - 145 185 210 225 Alternator performance data Reactance (f.l.cl.f) xd % xd' % xd'' % Motor starting capacity based on 30% voltage dip and 0.8 pf (kVA) Controller features DSE Controller Make and Model Auto mains failure (AMF) applications including remote communication, user configuration and complete gen-set monitoring and protection. Ready for generators with 3 ph 4 wire / 3ph 3 wire/ Mono ph Engine Protection Generator Protection Inputs and Outputs Event and Performance Log * Oil Pressure * Coolant Temperature * Over / Under Voltage * Over / Under Frequency * Phases Frequency * 3 No's Configurable Analog Inputs * 4 No's Binary Inputs * Gen-set text Alarm Log * For More Features we can use High Controller * Fuel Level (Optional) * Over Current * Charging Alternator Fault * 6 No's Binary Outputs * D+ Pre-Excitation Terminal * Engine Hours History Log Gen-set Enclosure specification (optional) Enclosure Type Anticorrosive Protection Access Doors Drainage Transportation Noise Level (@ Free-Field Conditions) Water Fill Cable Access Emergency stop Canopy RAL Color Chassis RAL Color Acoustic and Weatherproof Polyester Powder Coated Galvanized Sheet 6 Fuel and Water Drainage Provision Tested Single Point Lifting Facility & Forklift Pockets 70 dBA @ 7 meter Radiator Water Filling Provision Cable Inlet and Outlet Provision External Emergency Push Button RAL 2000 RAL 9011 Shipping Data Type Open Enclosed Length (mm) 2050 2360 Width (mm) 775 1100 Height (mm) 1325 1500 Notes: All Generators carry a one year or (1,000) hour's manufacturer's warranty In line with our policy of continuous, FPI reserves the right to change specification without notice. Weight (kg) 1000 1600
Similar documents
GEP88-3 - Scene7
The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.
More information