microphones - Jenne Inc.

Since 1931, Astatic has been a leading pioneer in American microphone
technology. Today, Astatic Commercial Audio Products cover the full spectrum
of wired microphone products. Astatic offers handheld, boundry, push-to-talk
and communication microphones as well as both heavy duty and mini-gooseneck
products. In addition, Astatic has several installed product available.
Overhead Condenser Microphones
Choose the 1700VP
when a floor stand
version is needed.
Features a featherlight 56 inch boom,
and exclusive Clutch
Rotation System. This
boom can be mounted
on any standard
microphone tripod
or base stand.
Choose the 1600VP
when a suspended
system is required.
Features an exclusive
anti-rotational mount,
30 feet of cable, XLR-F
wall plate and counter
poise string.
1700VP
1800VP
Choose the 1800VP
when a podium version is
required. Features an
18 inch miniature
gooseneck with TA3F and
XLRM-type connectors.
1600VP/1700VP/1800VP
Continuously Variable Pattern Condenser Microphone System with Remote Polar Control
Features:
• Continuously variable pick-up pattern selector in rack-mountable
control box
• All patterns from Omnidirectional to Cardioid to Figure-of-eight and
anything in between
• Up to 2,000 feet of standard microphone cable between the head and control box
• Control box is rack mountable with optional accessory RU-1
• RF (radio frequency) resistant
• Selectable 12 dB/oct bass roll-off at 80 Hz
JENNE PART NUMBER:
1600VP, 1700VP or 1800VP
Gooseneck Condenser Microphones
GN15vpd (15”)
GN20vpd (20”)
GN10VP (10”)
GN15vp (15”)
GN20vp (20”)
PTT Desk Stand Gooseneck Condenser Microphone
Mini Gooseneck Condenser Microphone
Features:
• Continuously variable pick-up pattern
• RF (radio frequency) - resistant design
• Status LED at mic base (defeatable)
• 12 dB/oct bass roll-off at 80 Hz for elimination of
unwanted thumping or rumbling low frequencies
• Quick-mount with integrated XLR base
• Silent, durable, dual-flex pipe design with
strong positioning memory
• Matt black finish
• Included shock-mounting ring
(approx. 20 dB noise isolation)
• Included locking XLR-F-type
flange-mount
• Included windscreen
JENNE PART NUMBER:
GN10VP
GN15VP
GN20VP
Features:
• Continuously variable pick-up pattern selector
• RF (radio frequency) -resistant design
• Feather-touch membrane switch
• Selectable push-to-talk or push-to-mute
• Selectable toggle power up ON or power up MUTED
• Programmable on/off switch
• Status LED at mic base (remote controllable)
• Logic I/O terminals for use with remote control systems
and/or audio mixers
• 12 dB/oct bass roll-off @80 Hz for elimination
of unwanted thumping or rumbling low frequencies
• Available in two lengths
• Rear or bottom-exit cable option
• Detachable 30’ cable
• Controls secured at base of mic
• Shock isolation pad
• May be permanently mounted
• Silent, durable, dual-flexpipe
design with strong positioning
“memory”
• Matte Black finish
AUDIO AND VIDEO CONFERENCING
1600VP
JENNE PART NUMBER:
GN15VPD
GN20VPD
GN10VP / GN15VP / GN20VP
GN15VPD / GN20VPD
Every effort has been made to ensure the integrity of this catalog. Jenne, Inc. cannot be held responsible for any misrepresentation associated with any products due to
omissions, typographic errors or misprints.
185
Microphones
930VPL (Replaces the 930VP)
Variable-Pattern, Boundary-Layer Microphone
AUDIO AND VIDEO CONFERENCING
FEATURES:
• Superior, low-noise, variable-pattern, surface-mounted boundary microphone
• Integrated hi-pass filter for elimination of unwanted low-frequency energy
• Ideal for use on altars, conference tables, stage floors or video productions
• Pick-up pattern is variable, allowing the installer to tailor the area of pick-up
• Self-contained to eliminate the need for mounting any external boxes
• Momentary-touch mute switch can be configured for push-to-talk or push on/off
• Logic I/O terminals for use with remote control systems and audio mixers
• Minimum 12 Volts (P12) phantom power required
• 30’ 3-Pin male XLR cable included
• Color: Black
JENNE PART NUMBER:
930VPL
CAD25A
Supercardioid Handheld Dynamic Microphone
FEATURES:
C195
• Supercardioid pick-up pattern minimizes annoying
feedback
• Hardened steel grille screen reduces deformation
• Uses a high-energy neodymium magnet
• Includes 15 foot XLRM to XLRF microphone cable.
• Includes snap-in microphone clip
• 2-year warranty
• Color: Black
Cardioid Handheld Condenser Microphone
FEATURES:
• Superior, low-noise Cardioid condenser microphone
• Designed for professional vocalists and musicians
• Wide and flat frequency response
• Includes 15 foot XLRM to XLRF microphone cable.
• Includes snap-in microphone clip
• 2-year warranty
• Color: Black
JENNE PART NUMBER:
C195
C195
JENNE PART NUMBER:
CAD25A
CAD25A
C195
220VP (Black)
220VPW (White)
Installation Condenser Variable Polar Pattern Button Microphone
727-18 (18”)
FEATURES:
Dynamic Cardioid Miniature Gooseneck
• Miniature, high performance condenser microphone
• Continuously-variable polar pattern control
• Securable polar pattern control
• All-metal housing for commercial applications
• RF resistant architecture
• Integrated hi-pass filter for elimination
of unwanted low-frequency energy
• Shock absorbing bushings and mounting
nut included
220VPW
• Colors: Black, White
FEATURES:
• Cardioid polar pattern
• RF resistant architecture
• 8mm commercial-grade gooseneck
• 3-pin XLR mounting
• Integrated metal wind screen
• Color: Matte Black
JENNE PART NUMBER:
727-18
727-18
JENNE PART NUMBER:
220VP
220VP
220VPW
901R (Matte Black)
901RW (White)
201r (Black) (Cardioid)
202rW (White) (Omni-directional)
Portable Hemi-Cardioid Condenser Boundary Mic
186
930VPL
FEATURES:
Installation Condenser Boundary “Button” Mic
• Surface-mounted boundary microphone
• Superior low-noise, Cardioid microphone
• Ideal for use on altars, tables, stage floors
• Transformerless design • Self-contained
• Cardioid pickup pattern minimizes feedback
• Double-layer, perforated, steel-screen
construction
• Colors: Matte Black, White
• Miniature, high-performance electret condenser microphones
• Designed for low-profile mounting in panels, tables or ceilings
• Mounts in a 13/16” opening in panels up to 2” thick
• Transformerless design • Self-contained
• Resists radio-frequency interference
• Colors: Black, White
FEATURES:
JENNE PART NUMBER:
JENNE PART NUMBER:
901R
901RW
201R
202RW
901R
www.jenne.com • 800-422-6191
201R
202RW
Microphones
900 (Matte Black)
900W (White)
878HL
Omnidirectional, Dynamic Tabletop Paging Mic
Hanging Overhead Choir or Conference Mics
FEATURES:
FEATURES:
• For fixed or temp. paging apps. (industrial, education, paging, etc.)
• Dual-impedance, Omnidirectional dynamic microphone
• Rugged cycolac housing
• Low-or high-impedance slide switch
• PTT (Push-to-Talk), LTT (Lift-to-Talk) options
• Smooth, wide-band frequency response
• Four non-skid, non-marring molded feet
• Includes 7 ft. 4c, shielded cable wired normally
open for relay-control
• For places of worship, choir, court/conference/meeting rooms
• Extended fidelity frequency response for versatile applications
• Unidirectional for rejection of feedback or ambient sounds
• 7 inch Flexpipe at mic end for precision aiming or adjusting
• 30 ft. Twist-resistant cable, 3-pin XLR connector
• .022 inch diameter hole for precision retention
• Low-noise, transformerless electronic design
• Includes foam pop filter • 2-year warranty
JENNE PART NUMBER:
878HL
900 or 900W
878HL
AMC105SNO-19 (19”, 1 On/Off switch)
AMC105-2-19 (19”, 2 On/Off switches)
119L-19 (19” Cardioid Paging Mic [No Switch])
119S-19 (19” Cardioid Paging Mic [On/Off Switch])
119LB-19 (19” Cardioid Paging Mic Black [No Switch])
Heavy-Duty, Omnidirectional Paging Microphones
Heavy-Duty Cardioid-Directional Paging Microphone
• For fixed paging applications, such as fast-food, supermarkets,
transportation, commercial facilities and dispatch
• An AMC-105 on a heavy-duty 19” gooseneck mic
• Heavy-duty mounting flange • 6-foot cable
• Push-button omnidirectional design
• For fixed or gooseneck mounting
• Smooth, wide-band frequency response
• Chrome-plated screen,
black cycolac cap and housing
• Extremely rugged • 2-year warranty
• For fixed paging applications, such as fast-food, supermarkets,
transportation, commercial facilities and dispatch
• Heavy-duty gooseneck and heavy-duty mounting flange
• Cardioid-directional pickup for maximum rejection of
feedback or unwanted ambient noise
• Solid brass machined head, polished
and chrome plated
• Wide, smooth frequency-response tailored
for speech intelligibility and communication
• 2-year warranty
JENNE PART NUMBER:
AMC105SNO-19
AMC105-2-19
AMC105SNO-19
WM625 (without PTT Switch)
WM625S (with PTT Switch)
JENNE PART NUMBER:
119L-19
119S-19
119LB-19
119L-19
210
Omnidirectional Dynamic Microphone
• Designed for mounting to wall outlet boxes • Low-impedance
• Self-contained, rugged assembly • 150 Hz to 415 KHz
• Simple (Push-to-Talk) PTT DPDT switch
• Excellent choice for intercom and
P.A. applications in warehouses,
factories, schools and fast-food
outlets, apartment houses, etc.
• Color: Brushed stainless steel
• 2-year warranty
WM625S
Omnidirectional, Condenser Button Style Microphone with
Adjustable Line-level Output
• Adjustable audio output from -50dBV to -10dBV
• Internal audio limiter to protect output from unwanted distortion
• Unbalanced output for connection to DVRs, cameras
or other audio inputs
• 12 VDC required to power microphone (not included)
• All metal housing for use in walls and ceilings
• Color: White
JENNE PART NUMBER:
JENNE PART NUMBER:
WM625
WM625S
210
WM625
210
AUD I O AND VI DEO CONFEREN C IN G
900W, 900
JENNE PART NUMBER:
631L
611L
Dynamic, Noise-cancelling, Palm-held Microphone
• For close talking/paging applications in security, mobile
communications, emergency, bus call stations
• 360º elimination of background noise and resists feedback
• Rugged polyester mic element resists effects
of extreme temperature, moisture, most acids,
alkalines and solvents
• Molded, high-impact-resistant cycolac body
• Permanently attached heavy-duty, 4-conductor,
2-shielded, coiled cord with stripped and
tinned ends
• 2-year warranty
Dynamic, Omnidirectional, Palm-held Microphone
• Designed for hand-held applications in quality sound installs
• Especially tailored for voice communications
• Provides crisp, clear, intelligible sound • Modern “Tear Drop” styling • Rugged construction
• Strong, polyester diaphragm resists moisture,
most acids, alkalines and solvents
• Low-impedance output • High-impact cycolac body
• Permanently attached, heavy-duty, coil cord
• 2-year warranty
JENNE PART NUMBER:
611L
611L
JENNE PART NUMBER:
631L
631L
Every effort has been made to ensure the integrity of this catalog. Jenne, Inc. cannot be held responsible for any misrepresentation associated with any products due to
omissions, typographic errors or misprints.
187
Microphone Accessories
GSM-1
Lectern/Podium Shock Mount
AU D I O AND VI DEO CONFERENCI NG
• Narrow “Footprint” for tight installations
• Hi-mass. low-volume, for maximum shock absorption
• Custom-formulated, impact and noise-resistant (INR) elastomer bushings
• Will not allow the microphone to “sag” or “droop,” even when using longer gooseneck microphones
• Direct input connection via top-mount, 3-pin female XLR-type connector
• Internal stop pin protects rubber parts from damage when inserting or removing microphones
• Includes 6’ balanced cable terminating in stripped and tinned ends
• Fits any mini-condenser gooseneck mic or other similar mics and attachments with XLR-type connector
• 2-year warranty
JENNE PART NUMBER:
GSM-1
40-116 (Without LED)
40-117 (With LED)
40-118 (With LED and Latch)
NB1/NB1B
Noise Isolating Earphones
Hi-Mass, Heavy-Duty Portable Desk Stand
• Selectable “Push-to-talk” or “Push-to-mute” (-55dB) or latching (40118 only)
• Direct input connection via top panel-mount, 3-pin female
XLR-type connector
• Energy-absorbing “Shockmount” mass
• Large push switch
• 2-year warranty
JENNE PART NUMBER:
40-116
40-117
40-118
• 8.5mm driver with neodymium magnet
for clear, robust sound
• NB1B features extended bass response
• Includes 3 sizes of soft silicone earbuds
• Includes 1/8th inch stereo plug, 1/4 inch
stereo plug, airline adapter and
nylon storage bag
JENNE PART NUMBER:
NB1
NB1B
NB1
40-116
U2
U1
USB Cardioid Dynamic
USB Stereo Headphones with Cardioid Condenser Microphone
• Dynamic microphone with on/off switch
• Tripod stand included
• 10’ removable cable included
• Windows® and Macintosh compatible
• Stereo headphones producing clean, accurate sound reproduction
• Condenser microphone is mounted on a flexible
gooseneck boom for easy positioning
• Tripod stand included
• 10’ attached cable included
• Windows® and Macintosh compatible
JENNE PART NUMBER:
U1
JENNE PART NUMBER:
U1
U2
U2
U37
U7
USB Cardioid Condenser Studio Recording Microphone
USB Omnidirectional Condenser Tabletop Recording
Microphone
• Smooth extended frequency response for singing, speech and instrument recording
• Selectable SPL overload protection
and bass reduction on front of microphone
• Tripod stand included
• 10’ removable cable included
• Windows® and Macintosh
compatible
U37
• Condenser microphone for tabletop recording
• Frequency response tailored for speech
• Tripod stand included
• 10’ removable cable included
• Windows® and Macintosh compatible
JENNE PART NUMBER:
U7
JENNE PART NUMBER:
U7
U37
188
GSM-1
www.jenne.com • 800-422-6191