Liquid Filled GID Tire Pressure Gauges Glow-In-The

Liquid Filled GID Tire Pressure Gauges
The liquid filled gauge with glow-in-the-dark dial
gives professionals the accurate readings they
need to win more races.
Part No.
Description
JOE32330 .........Precision 4" Liquid Tire Pressure Gauge GID, 0-30 PSI
JOE32331 .........Precision 4" Liquid Tire Pressure Gauge GID, 0-60 PSI
Glow-In-The-Dark Tire Pressure Gauges
Perform tire pressure adjustments,
even in dark pit areas. Gauges are
2-1/4" diameter, include 17" ultraflexible hose with swivel chuck and air
pressure release button.
Part No.
Description
JOE32305 ........0-15 PSI
JOE32306 ........0-30 PSI
Tire Roller JOE32200
Left Front Mini Sprint
Brake Bracket JOE25630
Brake bracket fits 03 to 08 style
spindles. Bolts on with superior fit.
Mini Sprint
Motor Mounts
Everything needed to
bolt Yamaha 600 or Honda
engines into a mini-sprint.
Part No.
Description
JOE25880 ....... Mini Sprint Yamaha
600 Motor Mount
JOE25885 ....... Mini Sprint Honda Motor Mount
Mini Sprint Parts
Mini Sprint Rear Hub Nut Tool JOE25698
Check stagger, sipe, groove,
inspect and clean tires without
chasing them all over the pits.
Adjust the width for different tire
sizes and break it down for easy
storage.
Features a quick pin to hold
your spacers in place. Multiple
holes are drilled in the handle to
hold any spacer stack in place.
The knurled hand grip and JOES
quality are built in.
Freeze Plug Adapter
JOE36200
Mini-Sprint Spacer Kits
Replace freeze plugs in a Chevy block
with these adapters to change the flow
of water for better cooling.
Sprint Car Extended Port Fitting - #6
JOE42050
Fittings are perfectly designed
for a Sprint Car fuel system. The
3 inch length moves the AN fitting
up so maintenance is a snap.
The anodized and laser etched finish looks great. The
-6 x #6 SAE O-ring fitting 3 inches long.
Oil Pressure Fitting
1/8" NPT X #4 AN JOE42800
Fitting is extended 2-1/4", making it easier to connect the line to an oil pressure gauge. 1/8" NPT to #4.
Mini Sprint Parts
Yamaha Mini Sprint Oil Filler Cap JOE25860
Oil Cap is O-ring sealed to keep dirt
out of the engine. The cap directs dirt
away from the opening. CNC machined from aluminum and anodized red. Hex head design eases
tightening and the cap is drilled for safety wire.
Mini Sprint Air Cleaner Kit JOE25850
Gain maximum
airflow and protect the engine
from the harsh environment
of dirt track racing with one
easy bolt on kit. The Mini
Sprint Air Cleaner Kit is ready to bolt on. Machined sealing
recesses at the rubber seal lock out dirt. The air cleaner
element is cleanable and the anodized finish is detailed with
machined accents.
Nine-piece kits are available in 3/4" or
1" cone style, splined versions to fit 1-3/4"
axles.
Part No.
Description
JOE25800 ........Spacer Kit, 3/4" Splines
JOE25818 ........Spacer Kit, 1" Splines
Mini-Sprint
Aluminum Torsion Stop
JOE25905
Stops are designed to reduce flex.
Black anodized and laser etching looks
cool on any car. Stops fit the popular 7/8ths
spline found on most mini sprints.
Torsion Arms For Mini-Sprints
Torsion Arms
reduce flex. Black
anodize and laser
etched for great
looks. Arms fit the popular 7/8ths spline.
Part No.
Description
JOE259230 ......Right Front 12" Torsion Arm
JOE25923 ........Left Front 13" Torsion Arm
JOE25935 ........Rear Torsion Arm, 12"
JOE25938 ........Rear Torsion Arm, 13"
Mini Sprint Nose Wing Stabilizers
JOE25970
Stabilizers (pair) fit perfectly and includes all
hardware for easy mounting. Black anodizing
and laser etching look great.
Mini-Sprint Front Nose Wing Posts
JOE25973
Posts (pair) fit perfectly and include all hardware
for easy mounting. Black anodized and laser etched.
2011 OPEN WHEEL
129
Valve Springs
K-Motion valve springs are coiled from the very best silicon or H-11 tool steel available for superior dependability. Sold in
sets of 16. To order a single spring, add -1 to the end of the part number.
Part No.
Type
Diameter
Installed Height
Open Height
Coil Bind
Notes
KMOK-700
KMOK-750
KMOK-800
KMOK-850
KMOK-900
KMOK-950
KMOK-975H
KMOK-1000
KMOK-1000H
KMOK-1100
KMOK-1200
KMOK-1500
KMOK-1600
KMOK-1800
Single Silicon
Single H-11
Double Silicon
Double Silicon
Double H-11 Without Damper
Double H-11 With Damper
Double M-3000 With Damper
Double H-11 With Damper
Double H-11 With Damper
Double Silicon With Damper
Double H-11
Triple H-11
Double Silicon With Damper
Triple H-11
1.265"
1.265"
1.460"
1.550"
1.550"
1.550"
1.550"
1.625"
1.625"
1.550"
1.625"
1.650"
1.550"
1.650"
120 lbs. @ 1.700"
130 lbs. @ 1.700"
165 lbs. @ 1.850"
135 lbs. @ 1.900"
240 lbs. @ 1.850"
245 lbs. @ 2.000"
275 lbs. @ 2.000"
240 lbs. @ 1.900"
265 lbs. @ 2.000"
230 lbs. @ 1.900"
260 lbs. @ 2.000"
265 lbs. @ 2.000"
200 lbs. @ 1.950"
340 lbs. @ 2.100"
375 lbs. @ 1.150"
395 lbs. @ 1.150"
495 lbs. @ 1.150"
430 lbs. @ 1.225"
645 lbs. @ 1.150"
690 lbs. @ 1.300"
620 lbs. @ 1.300"
740 lbs. @ 1.200"
825 lbs. @ 1.200"
555 lbs. @ 1.250"
880 lbs. @ 1.250"
950 lbs. @ 1.200"
528 lbs. @ 1.250"
921 lbs. @ 1.250"
1.050"
1.050"
1.085"
1.160"
1.090"
1.150"
1.200"
1.090"
1.090"
1.150"
1.150"
1.090"
1.170"
1.150"
Up To .500" Lift
Up To .610" Lift
Up To .700" Lift
Up To .630" Lift
Up To .700" Lift
Up To .750" Lift
Up To .750" Lift
Up To .750" Lift
Up To .850" Lift
Up To .640" Lift
Up To .790" Lift
Up To .850" Lift
Up To .720" Lift
Up To .890" Lift
Valve Locks
Titanium Retainers
K-Motion Valve Locks are fully
machined and heat treated. They
feature the more desirable 10°
angle that helps eliminate the “pull
thru” problem common with standard 7° locks.
Part No.
Valve Stem
KMOK-6110*
11/32"
KMOK-6120*
3/8"
KMOK-6130
11/32"
KMOK-6140
11/32"
KMOK-6160
3/8"
* Recess for lash caps
Height
K-Motion Retainers are manufactured from high strength titanium and
offer an additional .050" installed
height over standard retainers. Used
with 10° locks. Sold in sets of 16.
Standard
Standard
Standard
+.050"
+.050"
Valve Spring Application
A
KMOK-7300
K-800
K-850, K-900, K-950, K-1100,
K-1600
K-1000, K-1000H
K-1400, K-1500, K-1800
1.480"
1.065"
.700
–
1.500"
1.500"
1.500"
1.110"
1.180"
1.180"
.710"
.765"
.635"
–
–
–
KMOK-7320
KMOK-7330
KMOK-7370
Forged Steel Crankshafts
Main
Rod
Stroke Journal Journal Flange
Weight
3.480"
3.500"
3.750"
3.750"
3.875"
4.000"
3.400"
53 lbs.
53 lbs.
55 lbs.
54 lbs.
57 lbs.
57 lbs.
47 lbs.
Description
K1T350-3480BB6F
K1T350-3500BB6F
K1T350-3750BB6F
K1T400-3750CB6F
K1T400-3875CB6F
K1T400-4000CB6F
K1T302-3400GB6F
SB Chevy 350
SB Chevy 350
SB Chevy 350
SB Chevy 400
SB Chevy 400
SB Chevy 400
SB Ford 302
130
2011 OPEN WHEEL
350
350
350
400
400
400
302
2.100"
2.100"
2.100"
2.100"
2.100"
2.100"
2.100"
Chevy
Chevy
Chevy
Chevy
Chevy
Chevy
Ford
D
Forged Billet
H-Beam Connecting Rods
Crankshafts
are constructed
from 4340 steel
and undergo
core hardening for added
durability and
mag-particle inspection for superior quality control.
Part No.
Dimensions
B
C
Part No.
Forged series 4340 steel connecting rods are
core hardened to increase tensile strength and
mag-particle inspected. Rods are fitted with ARP
fasteners and finish honed. Center-to-center
dimensions are held within +/-.001" and journals are honed to +/-.0001". All rods listed
below are bushed for full floating wrist pins.
Offered with choice of standard 3640 or premium ARP 2000 fasteners. Sold in sets of eight.
Part No.
Description
K1TCH5700ALLB8S
K1TCH6000ALLB8A
K1TCH6000ALLB8S
K1TCH6125ALLB8S
5.700"
6.000"
6.000"
6.125"
SB Chevy
Housing Shaft
Bore
Dia.
2.225"
2.225"
2.225"
2.225"
2.100"
2.100"
2.100"
2.100"
Wrist Pin
Dia.
Fastener
Size/Type
Gram
Weight
.927"
.927"
.927"
.927"
7/16"/Std.
7/16"/2000
7/16"/Std.
7/16"/Std.
640
649
649
658
Xtreme Performance Tri-Lecular Bearings
Alecular SI Bearings
Tri-metal, enhanced copper lead bearings have
nickel barrier plating to withstand high loads and
extreme RPM. Multi-layer adhesion process improves stability between top
and intermediate layers. Large, chamfered oil holes, 3/4 grooving, and a narrow design make Xtreme main bearings
compatible with large radii crankshafts.
Rod bearings have 45° chamfers on the crank side for
increased radial clearance. Specify size (Standard, -.010",
-.020" or -.030") when ordering.
Alecular tri-metal (AluminumTin-Silicon) bearings offer long
wear, excellent wall variance
control and improved clearance tolerances. Tri-metal
composition resists corrosion
and debris embedment. Specify size (Standard, -.010",
-.020" or -.030") when ordering.
Rod
Bearings
Engine
SB Chevy
305-350, 1967-99
SB Chevy 400,
1970-80
Special Performance,
Honda 1.8885" Rod Sizing
Special Performance,
Honda 1.8885" Rod Sizing
KEBCR8025XP
KEBCR8025XP
KEBCR8028XP*
Description
Without
Dowel Hole
Without
Dowel Hole
Without
Dowel Hole
Main
Bearings
Description
KEBMB5425XP
3/4 Grooved
–
–
–
–
–
–
KEBCR8027XP* With Dowel Hole
*Special Performance, Honda Rod Sizing (1.8885") Bearings Are
Engineered For Use With A 2.0150"-2.0155" Housing Bore.
Engine
Rod
Bearings
Description
Main
Bearings
Description
SB Chevy 283-350
SB Chevy 400
KEBCR807SI
KEBCR807SI
Stock
Stock
KEBMB557SI
KEBMB509SI
Stock
Stock
Alecular Pro Series Bearings
Designed for use with aftermarket
crankshafts, Alecular Pro Series Bearings use an alloy of aluminum, tin,
and copper-plus bonded to a
steel back to compensate for distortion and misalignment. Specify size (Standard, -.010", -.020"
or -.030") when ordering.
Rod
Bearings
Engine
SB Chevy 305-350, 1967-99 KEBCR850HP
SB Chevy 305-350, 1967-99 KEBCR848HP
SB Chevy 400, 1970-80
KEBCR850HP
SB Chevy 400, 1970-80
KEBCR848HP
Dragon Claw Fuel Injection Unit KINSBC-DC-A
Dragon Claw unit is for small Chevy ASCS heads. The
magnesium manifold’s adjustable torque curve provides
more horsepower. Components include aluminum linkage
with grade eight fasteners, hard anodized aluminum barrel
valve, extra wide throttle shaft bushings, CNC-machined
ports, inboard and outboard nozzle bosses and tapered ram
tubes with 180° tops and removable adapters. Available with
magnesium or aluminum manifold to fit various applications.
Please call salesperson with your specific requirements.
K-Jets
Each K-type Jet is precisely machined and
stamped with the Kinsler name. Reamed orifices
are available from .050" through .108" and controlled
to within .0002".
Part No.
Size
KIN3715-50 ...... 0.050"
KIN3715-52 ...... 0.052"
KIN3715-54 ...... 0.054"
KIN3715-56 ...... 0.056"
KIN3715-58 ...... 0.058"
KIN3715-60 ...... 0.060"
KIN3715-62 ...... 0.062"
KIN3715-64 ...... 0.064"
Part No.
Size
KIN3715-66....... 0.066"
KIN3715-68....... 0.068"
KIN3715-70....... 0.070"
KIN3715-72....... 0.072"
KIN3715-74....... 0.074"
KIN3715-76....... 0.076"
KIN3715-78....... 0.078"
KIN3715-80....... 0.080"
K-140 High Speed Bypass
Part No.
Description
KIN3970 .................... 49-106 PSI
KIN3972 .................... 72-152 PSI
KIN3989 .................... Filter
Part No.
Size
KIN3715-82 .........0.082"
KIN3715-84 .........0.084"
KIN3715-86 .........0.086"
KIN3715-88 .........0.088"
KIN3715-90 .........0.090"
KIN3715-92 .........0.092"
KIN3715-100 .......0.100"
KIN3715-108 .......0.108"
Description
With Dowel Hole KEBMB5142HP Grooved Uppers
Without
KEBMB5160HP Fully Grooved
Dowel Hole
With Dowel Hole KEBMB5143HP Grooved Uppers
Without
–
–
Dowel Hole
Replacement Components
For Kinsler Fuel Injection
Part No.
Main
Bearings
Description
KIN1965-7
Description
KIN1965-7 ....... Up Nozzle Lines, -3AN Male O-ring x -3AN Female
Swivel 90°, 7" Long
KIN1965-9.5 .... Up Nozzle Lines, -3AN Male O-ring x -3AN Female
Swivel 90°, 9-1/2" Long
KIN1966-19 ..... Down Nozzle Lines, -3AN Female x -3AN
Female Swivel 90°, 19" Long
KIN2228 .......... Injector Nozzles (Special Order Only), Set of Eight (Specify)
KIN2379 .......... Aluminum Banjo Body Only, For 1/2"-20 Nozzle, 1/8" NPT Female Port
KIN2393 .......... Aluminum 1/2"-20 Nozzle Banjo With 1/8" NPT Female Port, Sintered
Bronze Air Filter With 1/8" NPT Male Thread
KIN2394 .......... Air Filter Only, Sintered Bronze With
1/8" NPT Thread
KIN2397 .......... Nozzle O-ring, Kinsler/Hilborn 1/2"-20 Thread
KIN3030
KIN3030 .......... Low-Speed Bypass
KIN3036 .......... Bypass Poppet For Main Bypass
KIN3040 .......... 0.183" Brass Shim For Bypass
KIN3043 .......... 0.030" Brass Shim For Bypass
KIN3112 .......... Main Bypass, -6AN Male Flare Quick Disconnect
KIN3319 .......... 0.019" Spring For Bypass
KIN3036
KIN3904
KIN3339 .......... 0.039" Spring For Bypass
KIN3720 .......... Plastic Jet Holder Case
KIN3903
KIN3903 .......... Low Speed Adjustable
KIN3904 .......... High-Speed Bypass
KIN3944 .......... Diaphragm For KIN3904
KIN4156 .......... KFI Fuel Filter, -6AN Fittings
KIN5520 .......... K-Type 2-Pc. Aluminum Throttle Link Arm, 5/16"
KIN5521 .......... K-Type 2-Pc. Aluminum Throttle Link Arm, 3/8"
KIN6160 .......... 1/2"-20 Port Plugs
KIN6178 .......... -12AN x -8AN Fuel Pump Fitting
KIN3112
KIN7793 .......... 2-3/16" To 2-1/2" High Flow Restrictor
KIN3944
2011 OPEN WHEEL
KIN6178
131
GT-1 High Performance Racing Oils
Kendall GT-1 High Performance Racing Oils provide excellent resistance to viscosity and thermal
breakdown at high temperatures. Protects against
sludge and varnish formation along with providing
good foam resistance. GT-1 Oils also offer enhanced wear protection for engines with flat-tappet
camshafts.
Part No.
Description
KEN527-7133 .......... 30w, GT-1, High Performance
KEN527-7134 .......... 40w, GT-1, High Performance
KEN527-7135 .......... 50w, GT-1, High Performance
KEN527-7136 .......... 10w30, GT-1, High Performance Synthetic Blend
KEN527-7138 .......... 20w50, GT-1, High Performance
KEN527-7133
KEN527-7134
KEN527-7135
KEN527-7136
KEN527-7138
Bulk Tire Relief Components
Kwik-Change offers many of their products separately in bulk form.
Part No.
Description
KCP713-001-H .......... Hollow Plugs, 2-Piece
KCP713-001-S .......... Solid Plugs, 4-Piece
KCP713-002 .............. Schrader Valves, 2-Piece
KCP713-004 .............. Screens, 4-Piece
KCP713-005 .............. Sealing Washers, 4-Piece
KCP713-006-O .......... O-Rings, 4-Piece
KCP713-006-Q .......... Quad Rings, 4-Piece
KCP713-007 .............. Grommets, 4-Piece
KCP713-100 .............. Relief Valves, 4-Piece
KCP713-123 .............. Light Springs, 8-Piece
KCP713-124 .............. Heavy Springs, 8-Piece
KCP713-127 .............. Poppets, 2-Piece
Part No.
KCP713-600
Description
KCP713-158-4........... Plastic Quick Disconnects, 4-Piece
KCP713-158-1........... Plastic Quick Disconnect, 1-Piece
KCP713-258-1........... Alum. Quick Disconnect, 1-Piece
KCP713-258-4........... Alum. Quick Disconnects, 4-Piece
KCP713-300 .............. Preset Pump, 30 PSI
KCP713-300-G .......... Gauge Head, 30 PSI Preset Pump
KCP713-600 .............. Preset Pump, 60 PSI
KCP713-600-G .......... Gauge Head, 60 PSI Preset Pump
KCP714-1000 ............ Next Generation Relief, 1-Piece
KCP714-1000-Q ........ Next Generation Quad Rings, 4-Piece
KCP714-1123 ............ Next Generation Light Springs, 8-Piece
KCP714-1124 ............ Next Generation Heavy Springs, 8-Piece
KCP714-1127 ............ Next Generation Poppets, 2-Piece
KCP713-100
Black Cover
Deluxe Leg Restraints
Center Steering Pad KIR00001
May be added to any Kirkey seat to add
improved leg protection. They are 20" long,
significantly longer than standard supports.
Covers must be purchased separately.
Black nylon covered, high density foamfilled pad is 6" dia. and 2" thick. Designed
for use with three-spoke steering wheels.
Part No.
Description
Airknit
Black Cover Part No.
Airknit
Grey Cover Part No.
KIR01300
KIR01400
Right
Left
KIR01341
KIR01441
KIR01347
KIR01447
Vinyl Coil-Over Covers
Covers protect coil-overs by keeping out mud
and rocks. Velcro closures allow easy spring
adjustments. Sold in pairs.
Part No.
Description
KIR00041 .........Black Coil-Over Covers
KIR00042 .........Red Coil-Over Covers
KIR00043 .........Blue Coil-Over Covers
132
2011 OPEN WHEEL
Lumbar Support
KIR99020
High density padding gives added support to lower back area.
Quick Change Gear Pan
KIR99100
Aluminum drain pan with handle has a
tray so hot oil will run off the gears.
KCP714-1000
RACING SEAT MEASUREMENTS
• Select a seat base width that will comfortably fit the driver's hips.
• Shoulder restraints should be based upon the driver's shoulder width.
Lightweight Full Containment
10° Layback Oval Track Seats
Lightweight Sprint Deluxe
Upright Oval Track Seats
Complete seat is a two-piece, aluminum extrusion with padded rib supports and elongated bottom. Base has
adjustable shoulder restraints and a
helmet restraint. Four-piece covers
are available separately in black only.
Double rib support, 10° layback seats are
made of MIG-welded .081" thick aluminum with
extrusions around seat perimeters for added
strength and safety. Flared openings are
strategically placed to lighten and strengthen
the seats. Seats weigh 10 lbs. and use seat
cover clips instead of cumbersome snaps.
Supports, covers and restraint kits sold
separately.
Description
Seat
Part No.
Black Cover
Part No.
14" Seat Base
14.5" Seat Base
15" Seat Base
15.5" Seat Base
16" Seat Base
17" Seat Base
KIR66100
KIR66200
KIR66300
KIR66400
KIR66500
KIR66700
KIR66111
KIR66311
KIR66311
KIR66311
KIR66511
KIR66511
Regular Seat Bases
Intermediate Layback
Oval Track Seats
Width
Black
Vinyl Cover
Part No.
Black
Cloth Cover
Part No.
Red
Cloth Cover
Part No.
Blue
Cloth Cover
Part No.
15"
16"
17"
18"
KIR39300
KIR39500
KIR39700
KIR39900
KIR36301
KIR36501
KIR36701
KIR36901
KIR36311
KIR36511
KIR36711
KIR36911
KIR36312
KIR36512
KIR36712
–
KIR36319
KIR36519
KIR36719
–
Supports provide protection for legs
and shoulders under high G-forces
and during an accident. Covers must
be purchased separately. Designed
for use with all Kirkey seats except
full containment models.
Part No.
Description
Head Supports
KIR00100
Right
KIR00200
Left
Leg Supports
KIR00300
Right
Right
KIR00300LW* (Lightweight)
KIR00400
Left
Left
KIR00400LW* (Lightweight)
Shoulder Supports
KIR00500
Right
KIR00600
Left
Head Support
Shoulder Support
Leg Support
Black
Vinyl
Cover
Part No.
Black
Cloth
Cover
Part No.
KIR00101
KIR00201
KIR00111
KIR00211
KIR00112 KIR00117 KIR00119
KIR00212 KIR00217 KIR00219
KIR00301
KIR00311
KIR00312 KIR00317 KIR00319
Red
Cloth
Cover
Part No.
Grey
Cloth
Cover
Part No.
Blue
Cloth
Cover
Part No.
–
KIR00311LW*
–
–
–
KIR00401 KIR00411 KIR00412 KIR00417 KIR00419
–
KIR00411LW*
KIR00501
KIR00601
KIR00511
KIR00611
Black Cloth
Cover Part No.
14"
14.5"
15"
15.5"
16"
16.5"
17"
KIR56100LW
KIR56200LW
KIR56300LW
KIR56400LW
KIR56500LW
KIR56600LW
KIR56700LW
KIR58111LW
KIR58311LW
KIR58311LW
KIR58311LW
KIR58511LW
KIR58511LW
KIR58511LW
Complete seat is a two-piece,
aluminum extrusion with padded rib
supports, elongated bottom and reinforced/adjustable head and shoulder
restraint system with energy absorbing impact foam. Covers are available
separately in black only.
Seat
Part No.
Seat Side Supports
Seat
Part No.
Lightweight Micro/Mini
Sprint Oval Track Seats
Intermediate, double rib support layback seats are made of .125" aluminum
and offered in 10° layback models. Features include contoured seat bottoms
for maximum head room, reinforced
head supports and raised fronts for
superior thigh support. Seat covers
must be purchased separately.
Double Rib Support 10° Layback
Width
–
–
–
KIR00512 KIR00517 KIR00519
KIR00612 KIR00617 KIR00619
*Special lightweight supports are for use with 56LW and 58LW Series Lightweight Sprint
Deluxe upright oval track seats only.
Description
Seat
Part No.
Black Cover
Part No.
13" Seat Base, 8°
14" Seat Base, 8°
15" Seat Base, 8°
16" Seat Base, 8°
KIR50130
KIR50140
KIR50150
KIR50160
KIR5013011
KIR5014011
KIR5015011
KIR5016011
Head And Shoulder Restraint Kit
Update an existing Kirkey
seat to accept head and
shoulder restraint system.
Retro-fit kits of .100" thick
5052 grade aluminum
are padded with
energy absorbing
foam and available in
standard or short versions (4" shorter left
side head restraints for confined cockpits). Covers, brackets
and hardware are included.
Part No.
Description
Standard Head and Shoulder
13"
Restraint Kits
KIR98701 .........Black Vinyl
KIR98711..........Black Cloth
KIR98712 .........Red Cloth
KIR98717 .........Grey Cloth
KIR98719 .........Blue Cloth
Short Head and
Shoulder Restraint Kits
KIR98701-S ......Black Vinyl
KIR98711-S ......Black Cloth
KIR98712-S ......Red Cloth
KIR98717-S ......Grey Cloth
KIR98719-S ......Blue Cloth
Note: Complete kit must be used
to be effective and the head restraint
cannot be used separately.
5"
15"
14.5"
7"
12"
22"
6"
9"
2011 OPEN WHEEL
11.5"
133
NEW SUPPLIER
Keizer Aluminum Wheels, Inc.
From Jr. Sprints to 410's, uprights to sidewinders, TQ's to midgets and beyond, Keizer offers wheels for them all. Diameters
from 8" to 15", old styles and new, they are all available. All have cold forged billet centers and the ability to outperform with
regard to strength and weight.
KAWDL10104SP
Part No.
KAWDL1084BLBC
Size
10" Direct Mount Wheels
KAWDL1073BC
10" x 7"
KAWDL1073BLBC
10" x 7"
KAWDL1074BC
10" x 7"
KAWDL1074BLBC
10" x 7"
KAWDL1083
10" x 8"
KAWDL1083BLBC
10" x 8"
KAWDL1084
10" x 7"
KAWDL1084BLBC
10" x 8"
10" Splined Wheels
KAWDL10104SP
10" x 10"
KAWDL10114SPBL
10" x 11"
KAWDL10115SPBL
10" x 11"
KAWDL10125SPBL
10" x 12"
KAWDL10126SPBL
10" x 12"
KAWDL10134SPBL
10" x 13"
KAWDL10135SPBL
10" x 13"
KAWDL10136SPBL
10" x 13"
KAWDL10144SPBL
10" x 14"
KAWDL10145SPBL
10" x 14"
KAWDL10146SPBL
10" x 14"
Spline
Back Spacing
Bead-Loc
–
–
–
–
–
–
–
–
3.00"
3.00"
3.00"
4.00"
8.00"
3.00"
4.00"
3.00"
None
Beadlock
None
Beadlock
None
Beadlock
None
Beadlock
27
27
27
27
27
27
27
27
27
27
27
4.00"
4.00"
5.00"
5.00"
6.00"
4.00"
5.00"
6.00"
5.00"
5.00"
6.00"
None
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Beadlock
Part No.
15" Direct Mount
Size
KAWDL1584BC
15" x 8"
KAWDL1584BCBL
15" x 8"
KAWDL1585BC
15" x 8"
KAWDL1585BCBL
15" x 8"
KAWDL1585BCPR
15" x 8"
KAWDL1594BC
15" x 9"
KAWDL1594BCBL
15" x 9"
KAWDL1595BC
15" x 9"
KAWDL1595BCBL
15" x 9"
KAWDL1595BCPR
15" x 9"
15" Splined Wheels
KAWDL15156SPIBL
15"x15"
KAWDL15157SPIBL
15"x15"
KAWDL15158SPIBL
15"x15"
KAWDL15176SPBCBL
15" x 17"
KAWDL15177SPBCBL
15" x 17"
KAWDL15178SPBCBL
15" x 17"
KAWDL15186SPBCBL
15" x 17"
KAWDL15187SPBCBL
15" x 18"
KAWDL8666AC
Part No.
15" Direct Mount Hubs
KAWDL10TRFHP
KAWDL10TRFHA
Part No.
10" Direct Mount Hubs
KAWDL175SPLN
Description
KAWDL10TRFHA-RH Front Hub Black Anodized 3 Pin Micro w/Bearing Right Hand
KAWDL10TRFHA-LH
Front Hub Black Anodized 3 Pin Micro w/Bearing Left Hand
KAWDL10TRFHP-RH
Front Hub Polished 3 Pin Micro w/Bearing Right Hand
KAWDL10TRFHP-LH
Front Hub Polished 3 Pin Micro w/Bearing Left Hand
10" Replacement Parts And Hubs
KAWDL10DMCAP
10" Front Hub Cap Micro
KAWDL1641
10" Front Hub Bearing Micro
KAWDL1641CUP
10" Front Hub Bearing Angular Contact Micro
KAWDL1641LUCID
10" Front Hub Bearing Sealed Angular Contact
10" Splined Wheel Centers
KAWDL175SPLN
10" Wheel Center
10" Replacement Beadlocks, Covers And Bolts
KAWDL10MC
10" Mud Cover
KAWDL10TIEBLKIT
10" Beadlock Bolt Kit Titanium
KAWDL10TIEC/KIT
10" Wheel Center Bolt Kit Titanium
KAWDL10BLKIT
10" Beadlock Bolt Kit Steel
KAWDL10BLRING
10" Beadlock Ring
KAWDL10BLRING/C
10" Beadlock Ring And Cover
KAWDL10C/Kit
10" Wheel Center Bolt Kit Steel
134
2011 OPEN WHEEL
KAWDL1585BC
KAWDL15186SPBCBL
Spline
Back Spacing
Bead-Loc
3.00"
3.00"
4.00"
4.00"
4.00" w/Proring
4.00"
4.00"
3.00"
3.00"
4.00" w/Proring
None
Outer
None
Outer
Ring
None
Outer
None
Outer
Ring
5.00"
6.00"
7.00"
5.00"
6.00"
7.00"
5.00"
6.00"
Inner
Inner
Inner
Outer
Outer
Outer
Outer
Outer
42
42
42
42
42
42
42
42
KAWDLSSEAL
KAWDL15TIEC-KIT
Description
KAWDL15FHA
Front Hub Black Direct Mount w/Bearing
KAWDL15FHP
Front Hub Polished Direct Mount w/Bearing
KAWDL15MCPAC
15" Add On Mudcover Wide 5
KAWDL15TFHP
Front Hub Polished Direct Mount w/Bearing
KAWDL15TRFHA
Front Hub Black 3 Spoke Direct Mount w/Bearing
KAWDL15TRFHP
Front Hub Polished 3 Spoke Direct Mount w/Bearing
15" Replacement Parts And Hubs
KAWDL8666AC
15" Front Hub Cap Bearing
KAWDLRADAPTA
15" Rotor Adapter Front Hub w/Bolts Black
KAWDLRADAPTP
15" Rotor Adapter Front Hub w/Bolts Polished
KAWDLSSEAL
15" Seal Front Hub
15" Splined Wheel Centers
KAWDL35SPLN
15" Wheel Center
15" Replacement Beadlocks, Covers And Bolts
KAWDL15MC
15" Mud Cover Formed
KAWDL15BLRING
15" Beadlock Ring
KAWDL15BLRING/C
15" Beadlock Ring And Cover
KAWDL15TIEBLKIT
15" Beadlock Bolt Kit Titanium
KAWDL15TIEC/KIT
15" Wheel Center Bolt Kit Titanium
Gen 2
Power Steering Gears
Stingray Wing Valve
KSEKSG2000
“Second Generation” power
steering
has a
new 4° valve and a 20% quicker lead ball screw for
quicker feedback and front wheel stability. Inboard mounting
strengthens top steering gear mount and eliminates the
steering gear as a structural member. The reservoir is built
into the live hub to prevent turbulence and aeration. Unit has
O-ring sealed wing slider ports and is 25% lighter than first
generation KSE gears.
Works in conjunction with steering
gear to control the angle of the sprint
car wing.
Part Number
Adapter attaches to the firewall and accepts
power steering pump.
Description
KSEKSGEN2L5650 ..... Steering Gear, Medium Effort, 11"Input, 16" Output
KSEKSGEN2L5640 ..... Steering Gear, Soft Effort, 11" Input, 16" Output
Replacement Parts
Part Number
Power Steering Pump Adapter
KSEKSC1019
Description
KSEKSG1070 .............. Steering Mount, 1/2 Box
KSEKSG6002 .............. Wing Port Fitting
Quick Release
Steering Wheel Hubs
KSEKSD1025
KSEKSD1027
Remove steering wheel
quickly for easy entry and exit.
Part No.
Description
KSEKSG1025 ........... Tapered Steering Hub
KSEKSG1027 ........... Quick Release Hub,
Pull Style
Elixer Racing
Power Steering Fluid
KSEKSM1086
Fluid has a higher viscosity index as
well as anti-foaming, anti-wear and antioxidation additives to minimize power
fade, lower corner speed assist loss
and decrease heat build-up. One quart
containers.
Through Shaft Power Steering Pump
KSEKSC1068-002
Front Cover And
Water Pump Assembly
KSEKSD10-10000
Available in aluminum, assembly
is compatible with all gear and chain
drive systems and has bolt patterns
for all current dry sump and fuel pump
setups. The cover has four possible
locations for the timing window, and includes
a front drive adapter and two hose adapters
for water pump block ports. Pan seal lip is not
included. (Use Mr. Gasket MRG99 seal lip on
non-gear drive units.)
Part No.
Aluminum power steering pump uses minimal horsepower,
but can generate 1,200 PSI. Pump has 3/8" male hex drive
input, 3/8" female hex drive output and accepts current fuel
injection pumps. Easily reversed and may be cam driven or
driven off the back of dry sump pump.
Part No.
Description
Replacement Components
KSEKSC1027............ Hex Shaft
KSEKSC1038............ Seal Kit For KSEKSC1030-001 And KSEKSC1030-002
KSEKSC1069............ Seal Kit For KSEKSC1068-002 (New Style)
KSEKSM1039 ........... Power Steering Bearing
Description
KSEKSD1011
Replacement And Accessory Components
KSEKSD1002............ Aluminum Front Cover
KSEKSD1011 ............ Crank Drive For Water Pump
KSEKSD1011L.......... Aluminum Crank Drive For Water Pump
KSEKSD1013............ Timing Window Sight Glass
KSEKSD1023
KSEKSD1023............ Cam Drive, 1/2" Hex
KSEKSD1033............ Water Pump Repair Kit
KSEKSD1041............ Standard Water Pump, Less Housing
KSEKSD1033
2011 OPEN WHEEL
135
Composite Air Box Assembly
KNE100-8567
Rubber Base Vent Filters
Lightweight yet durable sprint
car style air boxes are a must
for any racer currently using
traditional multi-siamese stacks.
Constructed from ultra-light
weight carbon fiber, the air box
provides ample air flow for your
racing needs. Air filter is washable and reusable. No holes in
base.
Replacement Components
Part No.
Description
KNE100-8564 ............ Air Filter Only
KNE100-8565 ............ Air Box Base Only
Kinsler Siamese Stacks
KNERD-5020
For use with Kinsler fuel injection systems on Chevy small block V8’s. Fits units
with 2-5/8" O.D. injector tubes, 2-1/2" I.D.
injectors with a 2.80" center-to-center bore
measurement. Stacks include 9" L. x 5-1/2"
W. x 6-3/4" oval top plate and one air cleaner.
Filters clamp to metal or plastic for use
on engines, transmissions and rear ends.
Vents have chrome tops and include clamp.
Part No.
Application
Flange I.D.
KNE62-1320
Trans./Rear End
3/8"
KNE62-1330
Trans./Rear End
1/2"
KNE62-1340
Trans./Rear End
5/8"
KNE62-1360
Trans./Rear End
3/4"
KNE62-1370
Trans./Rear End
1"
KNE62-1390
Trans./Rear End
1-1/4"
KNE62-1420
Trans./Rear End
1"
KNE62-1440
Crankcase
1-3/8"
KNE62-1460
Crankcase
1-1/2"
KNE62-1490*
Valve Cover
1-1/4"
KNE62-1511
Valve Cover
1"
KNE62-1512
Valve Cover
1-1/4"
KNE62-1513
Valve Cover
1-3/8"
KNE62-1514
Valve Cover
1-1/2"
KNE62-1515
Valve Cover
1-3/4"
KNE62-1516*
Valve Cover
1-1/4"
KNE62-2470
Trans./Rear End
5/16"
KNE62-2480
Trans./Rear End
9/16"
*Push-In Rather Than Clamp-On Breather.
Part No.
Part No.
Mtg. Flange I.D.
Injector Bore I.D.
Air Filter Dia. x Length
KNERD-0620
KNERD-0710
KNERD-0720
2-1/4"
2-1/2"
2-1/2"
2-3/16"
2-7/16"
2-7/16"
3-1/2" x 6"
3-1/2" x 5"
3-1/2" x 6"
Dual Oval Style Air Filters
“Late Type” Hilborn
Siamese Stacks
Engineered for use with stock, uncut,
siamesed ram tubes. Sold complete with 9"
L. x 5-1/2" W. x 6-3/4" oval top plate. Sold in
sets of four.
Part No.
Center-to-Center O.D.
I.D.
Model
Bore Measurement
KNERD-4400
KNERD-4600
KNERD-4650
2-1/4"
2-1/2"
2-5/8"
2-3/16"
2-7/16"
2-1/2"
“Q”
“P”
“327-C-84”
2.44"
2.70"
2.70"
Performance Gold Oil Filters
KNE62-1000
KNE62-1010
KNE62-1020
KNE62-1030
KNE62-1040
KNE62-1090*
KNE62-1100*
KNE62-1110*
KNE62-1140
KNE62-1160
KNE62-1170
KNE62-1518
KNE62-1519
KNE62-1520
*With Stud.
Application
Vent O.D.
O.D.
Height
3/8"
1/2"
5/8"
3/4"
1"
3/8"
1/2"
5/8"
1/2"
3/4"
1"
5/8"
3/4"
1"
2"
2"
2"
2"
2"
2"
2"
2"
3"
3"
3"
3"
3"
3"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
600 Mini Sprint Performance
Air Filter KNEE2990
Air filter is designed to increase
horsepower and acceleration while providing
excellent filtration. Washable and reusable.
K&N Air Filter Oil is formulated
for superior air filtration when
used with K&N filters. The cleaner
will clean K&N filter elements and
is biodegradable.
Part No.
Part No.
2011 OPEN WHEEL
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
No
Fuel Cell/Rear End, -8AN
Fuel Cell/Rear End, -10AN
Fuel Cell/Rear End, 5/8" Hose
Fuel Cell/Rear End, 3/4" Hose
Fuel Cell/Rear End, 1" Hose
Fuel Cell/Rear End, -8AN
Fuel Cell/Rear End, -10AN Hose
Fuel Cell/Rear End, 5/8" Hose
Fuel Cell/Rear End, -10AN
Fuel Cell/Rear End, 3/4" Hose
Fuel Cell/Rear End, 1" Hose
Valve Cover, Push-In With Shield
Valve Cover, Push-In With Shield
Valve Cover, Push-In With Shield
Filters deliver high volume, positive
oil flow with low restriction and provide the proper balance between
engine protection and oil pump
drag. An inner element traps contaminants as small as 10 microns.
Flow rates are between 12-16 GPM
(depending upon filter size) and filters have up to 550 PSI of
hydrostatic burst strength.
136
Shield
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/2"
2-1/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
1-1/8"
1-1/8"
Crankcase vent filters, with vent tubes
swedged into base, press into vent hoses
or grommets. Filters with mounting stud are
ideal for remote mounting.
“Early Type” fuel injector single stack filters are
for use with velocity stacks, or straight tubing.
Packaged eight per box.
Description
Height
2"
2"
2"
2"
2"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
1-3/8"
1-3/8"
Steel Base Vent Filters
Individual Round Style Air Filters
KNEHP-3001 ....Ford/Chrysler Applications
KNEHP-3002 ....Chevrolet
O.D.
Air Filter Oil
And Cleaner
Description
KNE99-5000 .....Recharger Kit
(6.5 Oz. Oil And 12 Oz. Cleaner)
KNE99-5050 .....Recharger Kit
(8 Oz. Oil And 12 Oz. Cleaner)
KNE99-0504 .....6 Oz. Air Filter Oil, Aerosol
KNE99-0516 .....12 Oz. Air Filter Oil, Aerosol
KNE99-0533 .....8 Oz. Air Filter Oil, Squirt
Part No.
Description
KNE99-0551 .....1 Gallon Filter Oil
KNE99-0606 .....12 Oz. Air Filter
Cleaner, Squirt
KNE99-0621 .....32 Oz. Air Filter
Cleaner, Squirt
KNE99-0635 .....1 Gallon Air Filter
Cleaner
Valve Lash Adjusting Torque Wrench
LSMTQ-1003
Valve Seat Pressure Testers
On-head, adjustable testers work with shaft
style and stud mount rocker arms and include
0-600 PSI liquid-filled gauges. Slant handle
is ideal for confined engine compartments.
Use with LSMPV-001 to check piston-to-valve
clearance.
Part No.
Description
LSMPC-100 ............... Valve Seat Pressure Tester,
Standard Handle
LSMPC-100SLC........ Valve Seat Pressure Tester,
Slant/Straight Removable
Handle
LSMPC-104 ............... 4" Handle Extension For LSMPC-100 or LSMPC-100SLC
LSMPV-001 ............... Piston-To-Valve Check Tool Adapter, Inserts In Place Of The
Load Cylinder On Any LSMPC-100 Configuration
“Spring Machine” Bench Top
Valve Spring Tester
The "Spring Machine" accurately and
easily measures valve spring
pressure. Compress the
spring to the specified
installed height, lock
down the stop, and read
the gauge. Horizontal
design is exceptionally
stable. Choose 600 or
1,000 lb. gauge.
Part No.
Set valve lash and properly torque adjusters. Cuts
lash adjustment time in
half. Eliminates rounded-off
Allen wrenches and damaged adjusters. Set includes
3/16", 5/32" and 1/8" Allen
Wrenches.
“One-Tool” Valve
Lash Adjusting Tool
Handy adjusting tool can be
used with virtually any shaft
or stud mount rocker setup.
Snap on a 1/2" drive socket
and insert the correct hex
key. The knurled, anti-slip handle
provides a secure grip, even with oily
hands. Bushings to accept four different
sized T-handles are included. T-handles are not included, but
are available separately.
Part No.
Description
LSM1T-100 ................ “One Tool” Valve Adjusting Tool
LSM1T-1/8 ................. 1/8" T-Handle
LSM1T-3/16 ............... 3/16" T-Handle
LSM1T-5/32 ............... 5/32" T-Handle
LSM1T-7/32 ............... 7/32" T-Handle
Description
LSMSM-600 .............. Valve Spring Tester, 600 lb. Gauge
LSMSM-1000 ............ Valve Spring Tester, 1,000 lb. Gauge
Dual Feeler Gauge Holder
LSM’s innovative tools are available
for most cylinder heads and make
changing valve springs an easy, oneman operation.
Ideal when setting intake
and exhaust valve clearance,
Holder secures two sets of
1/2" wide feeler gauges on
a single handle. Purchase
feeler gauges separately.
Part No.
Part No.
Valve Spring Removal Tools
Description
LSMSC-100 ............... SB Chevy With Jesel/T&D,
Buick With Jesel
LSMSC-150 ............... SB Pontiac/Windsor Ford, All
With T&D
LSMSC-200 ............... SB2 With Jesel/T&D, SB Ford
With Jesel/T&D,
BB Chevy With Jesel/T&D,
LSMSC-800 ............... Stud Mount Spring Changer,
All 7/16" Stud Mount Rocker Systems
Description
LSMFH-200R ............ Red
LSMFH-200BK .......... Black
LSMFH-200BL .......... Blue
ALL96420.................. Standard Feeler Gauge Set
ALL96421.................. Angled Feeler Gauge Set
NEW SUPPLIER
Lightweight Racing Batteries
Light weight, maintenance-free Valve Regulated Sealed Lead Acid Battery (VRSLAB) was
originally developed for military aircraft where weight, power and safety are priorities. This
also makes it the perfect choice for today’s racer. May be mounted in any position and will
not leak, even if the case is damaged. Battery mounts are also offered
Part No.
REAAP1228
REAAP1236
REAAP1257
CCA Reserve Capacity Peak Dis. Amps
550
775
850
28 Mins.
36 Mins.
57 Mins.
1400 @ 20 Sec.
1200 @ 15 Sec.
1500 @ 10 Sec.
Dimensions
Battery Mount
Weight
5.25" L. x 4.50" W. x 7.0" H.
7.625" L. x 5.25" W. x 6.875" H.
9.75" L. x 5.25" W. x 6.875" H.
–
REA2010
REA2020
18 lbs.
24 lbs.
31 lbs.
2011 OPEN WHEEL
137
DX Computerscales
LON72634
Accuset Basic System Computerscales
LON72594
View all wheel weights and partial
percentages simultaneously on
large, separate screens. Intel microprocessor controlled scales have a
10-setup memory and can compute
center of gravity. Set includes dead
flat, low profile1,500 lb. pads, heavy
duty yellow cables with billet AN
connectors and gold plated contacts,
battery, charger, and heavy duty carrying case.
Accuset Basic System has
a single button to display all
wheel weights and another to
show all partial percentages.
Dead flat, 15" low profile CNCmachined scale pads, heavy
duty red cables with AN connectors and black plastic carrying case are included.
DXI Pro
Wireless Computerscales
Scales have memory and display all
wheels and partial weights. Compact
control box has a wireless receiver,
and transmitters are built into each
pad, eliminating external antennas
or modules. Choose single or dual
load cell pad systems. Dual load cells
offer a more rigid platform. Systems
include dead flat, CNC-machined
pads and a roll-around cart.
Part No.
Description
LON72701 ........Basic Wireless With No Case
LON72711 ........DXI Pro Wireless Computerscales, Single Load Cell Pads
LON72725 ........DXI Pro Wireless Computerscales, Dual Load Cell Pads
DXI Vision
Professional Model Computerscales
System can display
all wheel weights on
individual screens, and
partial weights and percentages simultaneously
on a four-line display.
Memory can be used
to compare weights.
Choose standard, single
load cell pads, or dual
load cell pads with a more rigid platform and reduced deflection. Systems include dead flat, CNC-machined scale pads,
heavy duty yellow cables with billet AN connectors and gold
plated contacts, and heavy duty carrying case.
Part No.
Description
LON72609 .........DXI Vision Professional Model Computerscales,
Single Load Cell Pads
LON72652 .........DXI Vision Professional Model Computerscales,
Dual Load Cell Pads
DXI Vision Semi-Pro Model Computerscales
LON72601
A step-up from economy
units, Semi-Pro system will
display all wheel weights,
partial weights and percentages at the same time.
Heavy duty red cables with
AN connectors, dead flat,
CNC-machined scale pads and black plastic carrying case
are included.
138
2011 OPEN WHEEL
Computerscales
LON72581
Basic, system is ideal
for IMCA, street stocks,
Legends, Dwarf cars, etc.
Unit offers large displays of
weights and percentages,
all accessed with a single push button. System includes
heavy duty red cables with AN connectors, 12" x 12", 1,100 lb. pads and
black plastic carrying case.
Scale Cart LON72305
New, improved portable cart offers
convenient storage of computer scales
in the garage or at the track and holds
control box at the proper height for
easy viewing. Lid closes, securing
pads and contents.
Toe Plates LON79500
Rest plates against the tire on
each side and use a tape measure.
Two tape measures included.
Toe-In Gauge
LON79620
When used with the LON79610
Tire Scribe (available separately)
one person can accurately set toe-in.
Billet Aluminum Tire Scribe
LON79610
Designed for use with LON79620
Toe-In Gauge, Tire Scribe makes a
true running line on the face of the
tire. Rigid, billet aluminum scribe
is spring loaded for easy, one
person use.
Tire Tape LON50870
Tape is 1/4" wide x 10' long.
Memory Tire Pyrometers
Tirelief Kit LON50100
Longacre standard and deluxe
pyrometers record and display 12 tire
temperatures at the same time and
store 10 complete sets of temperatures
with recall. Deluxe version will compute
average tire temperatures for each tire,
and features a backlite display with
automatic shut-off and a 4-car, 75 lap
memory stopwatch. The deluxe pyrometer can start recording tire temperatures at any corner. The standard unit must
start at the right front tire.
Pro-Team Tirelief Kit has 12 sealing
adapters, six relief valves with covers,
setting tool, inflation adapter and carrying case.
Part No.
Description
LON50682 ........Standard Pyrometer
LON50690 ........Deluxe Pyrometer
Infrared Laser Pyrometers
Laser-sighted pyrometers deliver instant response and non-contact temperatures. Units
hold readings longer than previous units.
Part No.
Description
High Temp Valve Stem
QC Grommets LON50301
Manufactured from silicon, valve stem grommets can withstand up to 400° F. Sold in packs
of four.
Quick Fill Tire Gauges
Connect an air line to the Quick Fill
Gauge and press the lever to fill
tires twice as fast. Gauges feature
glow-in-the-dark faces and bleed
buttons.
Part No.
Description
LON50406 ........0-60 PSI
LON50426 ........0-30 PSI
LON50612 ........To 600°F.
LON50614 ........To 1000°F.
Deluxe Digital Pyrometer
LON50640
Performs instant temperature
readings from 0-2,000°F. and
holds the highest temperature
attained. Compare temperatures
with the press of a button. Includes
foam lined case.
Valve Core Tools
Replace valve cores
quickly. Deluxe aluminum
tool stores valve cores in the handle (three cores included).
Compact tool may be attached to a key chain.
Part No.
Durometer And Tread Depth Gauge
Durometer (LON50540) and tread depth
gauge (LON50560) in one convenient carrying case. Also available
separately, durometer precisely keeps
track of tire hardness, while tread
depth gauge is accurate up to 1/128".
Description
LON50555 ........Durometer And Tread Depth Gauge,
Includes Carrying Case
LON50540 ........Durometer
LON50560 ........Tread Depth Gauge
Tireliefs
Tireliefs relieve heat-caused
pressure build-up during a race,
preventing critical changes in stagger and weight distribution. Aluminum Tireliefs will not affect wheel
balance. Sold in sets of four.
Part No.
Save precious time topping off tire pressures. Ultra
lightweight aluminum air tank
holds enough air to top off
four tires and the inlet valve
allows tank filling in less than
15 seconds. Tank has a 0-60
PSI, Quick Fill tire gauge with
ball chuck.
Part No.
Description
LON50316 ........7 Gal. Tank No Tire Gauge
Description
LON50270 ........Deluxe Valve Core Tool
LON50272 ........Compact Valve Core Tool
Part No.
Portable Aluminum Air Tank
With Filler Tire Gauge
LON50314
Description
LON50000 ........Adjustable Tirelief 3-40 PSI
LON50240 ........Quick Change Adapter
LON50290 ........Tirelief Setting Tool
Standard Tire Gauges
Easy-to-read, 2" dial-type
gauges have 14" hoses, air release buttons, and rubber gauge
bumpers to prevent damage.
Choose white or glow-in-the-dark
background.
White Part No.
Glow-In-The-Dark Part No.
Description
LON50400
LON50420
LON50450
LON50401
LON50421
LON50451
0-60 PSI In 1 lb. Increments
0-30 PSI In 1/2 lb. Increments
0-15 PSI In 1/4 lb. Increments
Deluxe Tire Gauges
Deluxe Tire Gauges with 2-1/2" glowin-the-dark dials are fitted with high flow
button air releases to hold pressure until
released, ultra-flexible hoses, swivel
chucks, and rubber gauge bumpers.
New gauge dampers give more accurate
readings and extend gauge life.
Part No.
Description
LON50402 ........0-60 PSI In 1 lb. Increments
LON50422 ........0-30 PSI In 1/2 lb. Increments
LON50452 ........0-15 PSI In 1/4 lb. Increments
LON50518 ........Foam Lined Hard Case
2011 OPEN WHEEL
139
Magnum Tire Gauges
3-1/2" glow-in-the-dark gauges
include hi-flow release buttons, swivel
chucks, internal gauge dampers for
more accurate readings, 17" ultra flexible hoses, and silver case.
Part No.
Description
LON50404 ........0-60 PSI In 1 lb. Increments
LON50424 ........0-30 PSI In 1/2 lb. Increments
LON50454 ........0-15 PSI In 1/4 lb. Increments
Memory Stopwatch LON22162
Stopwatch offers crisp, one-button activation and a 10-lap memory. Auto shut-off
prolongs battery life.
Air Density Gauge LON50888
Make accurate jet changes by monitoring
air density percentage. Precision gauge
includes case and jetting chart.
Liquid-Filled Tire Gauges
Gauges have pressure equalizer
buttons to eliminate pressure differences, a 2-1/2" diameter, glow-inthe-dark face with protective bumper
and a 17" hose with swivel chuck.
Part No.
Description
LON50403 ........0-60 PSI In 1 lb. Increments
LON50423 ........0-30 PSI In 1/2 lb. Increments
LON50453 ........0-15 PSI In 1/4 lb. Increments
Sportsman Gauges
Economical, steel-cased gauges
have CNC-machined brass gears,
industry standard mechanisms and
viscous pointers for accurate readings. Back lighting kit and fittings
are included.
Part No.
Digital Series Tire Gauges
Accurate and easy to read. Gauges include
back lights, air release buttons, external
gauge bumpers and are available with angle
or ball chuck. Case is included.
Part No.
Description
LON50348 ........0-100 PSI, Economy Model, Ball Chuck
LON50351 ........0-25 PSI, Angle Chuck
LON50355 ........0-60 PSI, Ball Chuck
LON50356 ........0-60 PSI, Angle Chuck
LON50358 ........0-125 PSI, Angle Chuck
Digital Memory Tachometers
Digital 0-10,000 RPM tachometer and digital 0-19,000
RPM tachometers are
extremely accurate and have
a high RPM warning light and
easy recall. Weighs only 1-1/2
ozs.
Part No.
Hot Lap (In-Car Timing System) LON21705
An infrared transmitter mounted
at track side automatically triggers the In-Car
Timer with 100% accuracy each and every lap.
Transmitter works as far
away as 60 feet. Includes
display, receiver, transmitter,
harness and instructions.
Two-Car Stopwatch Clipboard
Aluminum clipboard includes two dualmemory Robic stopwatches which display
average MPH and lap count. Lap time and
chassis sheets are also available.
Part No.
Description
LON22318 ........Two-Car Stopwatch Clipboard
LON22523 ........Pre-Race Checklist, 2 Pads/50 Sheets
Each
LON22525 ........Lap Timing/Race Scoring,
2 Pads/50 Sheets Each
LON22528 ........Chassis Set-Up/Tire Chart,
2 Pads/50 Sheets Each
140
2011 OPEN WHEEL
Description
LON46505 ........Fuel Pressure, 0-15 PSI
LON46510 ........Oil Pressure, 0-100 PSI
LON46515 ........Water Temperature, 100°-280°F.
LON46520 ........Oil Temperature, 100°-340°F.
Description
LON44391 ........Digital 0-10,000 RPM Tachometer
LON44402 ........Digital 0-19,000 RPM Tachometer NEW!
Gagelites Engine Warning
Light Systems
A bright indicator light warns of something wrong, and helps
save expensive engine parts. Kits include sender, light, wire,
terminals and fittings.
Sender Part No.
Kit Part No.
Description
Pipe Thread Size
LON43080
LON43000
LON43241
LON43250
LON43252
LON43300
LON43350
LON43020
LON43021
LON40000
LON40100
LON40141
LON40150
LON40152
–
LON40350
LON40250
–
20 PSI Low Oil Press.
15-50 PSI Adj. Oil Press.
Low Water Press.
230° High Water Temp.
230° High Water Temp.
250° High Water Temp.
270° High Oil Temp.
2-7 PSI Adj. Low Fuel Press.
4 PSI Low Fuel Press.
1/8" NPT
1/8" NPT
1/8", 1/4" NPT
1/2" NPT
3/8" NPT
1/2" NPT
1/2" NPT
1/8" NPT
1/8" NPT
Low Oil Pressure
Ignition Shut-Off Switch
LON43600
If oil pressure drops below 12 PSI, ignition
shuts down and engine cannot start until
pressure is back up. Prevents engine damage. Use with momentary toggle switch LON45462.
Aluminized Insulation Cloth
LON64150
Well suited to firewall, floorboards,
etc. Special 58" x 24" cloth is aluminized on one side to reflect heat,
silicone coated on the other. Cuts
easily with scissors.
LON44601
LON44611
LON44802
Switch Panels
LON44535
Longacre Switch Panels
are assembled and wired
using the same color code as
the Longacre gauge panels
for an easy to understand,
professional installation.
Longacre ignition switches
are heavy duty 12 volt, 40
amp capacity. Choose from
lightweight aluminum or carbon fiber panels with aircraftstyle safety switch, standard toggle with non-hardening silicone rubber weatherproof switch cover, or fully weatherproof
toggle switch, which features a special polyurethane coating
to isolate the unit from dirt, moisture and the elements.
Part No.
Description
Aluminum Switch Panels With Aircraft-Style Safety
Switch Covers
Heavy Duty 40 Amp Switches
Switches have silver plated contacts, solid brass mechanisms and
tough phenolic bodies. Choose
from standard or weatherproof
LON45470
switches. Weatherproof switches are well suited to the rigors
of dirt oval track applications.
Ignition Switch With Weatherproof Switch Cover
(Or Mag Kill Switch)
Starter Button With Weatherproof Rubber Cover
Ignition Switch With Aircraft Safety Switch Cover
(Or Mag Kill Switch)
Ignition/Start Combination
With Aircraft Safety Switch Cover
Aircraft Safety Switch Cover Only
Padding provides maximum
energy absorption and uses a
pre-tape adhesive for installation.
Fits 1-1/2" to 1-3/4" tubing, and
is available in conventional or
streamlined “mini” style (improves
line of sight and reduces blind
spots). Offered in black or red, 3' lengths.
Part No.
Standard
Part No.
Weatherproof
Part No.
LON45420
LON45423
LON45460
LON45466
LON45470
–
LON45490
–
LON45370
–
Description
LON65182 ........“Mini” Roll Bar Padding, Black, 3'
LON65184 ........“Mini” Roll Bar Padding, Red, 3'
Steering Wheel Nose Pads
Offered in traditional round, or new high
density padded triangular design, nose
pads are required by most sanctioning
bodies and race tracks.
Part No.
LON44601 ........Ignition Switch and Starter Button
LON44611 ........Ignition Switch, Starter Button and Pilot Light
LON44661 ........Ignition Switch, Starter Button, Access. Switch and Pilot Lights
LON44671 ........Ignition Switch, Starter Button and Accessory Switch
Aluminum Switch Panels With Silicone Rubber Weatherproof Switch Covers
LON44801 ........Ignition Switch and Starter Button
LON44831 ........Ignition Switch, Starter Button and Pilot Light
LON44881 ........Ignition Switch, Starter Button, 2 Access. Switches and Pilot
Lights
Aluminum Switch Panels With Weatherproofing
LON44672 ........Ignition Switch, Starter Button and Accessory Switch
LON44802 ........Ignition Switch and Starter Button
Carbon Fiber Switch Panels With Aircraft-Style Safety
Switch Covers
LON44535 ........Ignition Switch, Starter Button, 2 Access. Switches and Pilot
Lights
Description
High Density
Roll Bar Padding
Description
LON56890 ........High Density Steering Wheel Nose Pad, Triangular
LON56899 ........Steering Wheel Nose Pad, Round
Spline Hub Steering Quick Disconnect
LON56605
Spline hub design offers better steering control. Includes aluminum hub
with pull ring release and double safety
grooves. Welds to 3/4" dia. shaft.
Brake Pressure Kit
LON44145
Check front-to-rear brake pressures
and set brake bias for best performance. Kit includes two pressure
gauges in a foam-lined silver case.
Individual Bulkhead Fittings
And Frame Tabs
Part No.
Description
LON45263 ........-3AN Bulkhead Fitting Only, Sold Individually
LON45286 ........-3AN Bulkhead Fitting and Frame Tab, Sold
Individually
Digital Shock Inflator
Shock inflator has a digital 0-300
PSI gauge and an extra long hose
to allow filling shocks on car. Inflator
connects directly to nitrogen line,
filling and bleeding shocks quickly. A
special chuck prevents pressure loss
and inaccurate settings.
Part No.
Description
LON50473 ........Digital Shock Inflator
LON50483 ........Digital Shock Inflator, Less Fill Hose
LON50493 ........Basic Shock Inflator, Less Fill Hose
2011 OPEN WHEEL
141
Oil/Fuel Pressure Lines
24 Volt Pit Impact Gun
-4AN braided stainless steel with
ends installed will connect oil or fuel
pressure gauge to engine. Includes
1/8" NPT fitting to -4 adapter.
No more air hoses to tote or trip over.
True portable, battery-powered 24 volt
impact gun has a high torque, 1/2" drive
that spins lug nuts off or on easily. Long
lasting battery provides extended usage.
Part No.
Description
LON45020 ........24" Gauge Line
LON45030 ........36" Gauge Line
LON45040 ........48" Gauge Line
LON45020
Spring Rubbers
Fine tune spring rate for the perfect set-up
Part No.
Description
Coil-Over Spring Rubbers
Part No.
Description
LON68602 ........Impact Gun With (1) Battery And Fast Charger
LON68604 ........Impact Gun With (2) Batteries And Fast Charger
LON68610 ........(2) Impact Guns With (3) Batteries And Fast Charger
LON68618 ........Replacement Battery
LON68620 ........Replacement Battery Charger
Oil Filter Cutter LON77750
Rigidly constructed billet aluminum, easy-to-use
tool quickly cuts open oil filters for inspection to
spot potential engine problems.
LON61005 ........Yellow 5-Soft
LON61010 ........Clear 10
LON61015 ........Orange 15
LON61040 ........Red 40
LON61050 ........Blue 50
LON61070 ........Black 70 Hard
Engine Leakdown Tester
LON73010
Heavy Duty Oil Stabilizer
Synthetic Oils
Stabilizer is formulated to eliminate dry starts,
resist thermal breakdown and reduce smoke, leaks,
knocks and blow-by. May also be used in transmissions, differentials and transfer cases to reduce
heat and noise. Sold in one quart or one gallon
containers.
Part No.
Part No.
Description
LUC10001 ........Heavy Duty Oil Stabilizer, 1 Quart
LUC10002 ........Heavy Duty Oil Stabilizer, 1 Gallon Container
Pure Synthetic Oil Stabilizer
LUC10130
Originally designed for racing use with synthetic oil, stabilizer reduces frictional heat
and wear in engines, transmissions and differentials for increased horsepower and fuel
mileage. Sold in one quart bottles.
20/50, 50 And 70 Plus Racing Oils
Super slick high performance lubricants, for
racing or heavy duty engines, reduce friction
and increase horsepower. Anti-foam agents
protect against wear and scuffing and a protective film assures a “wet” start every time.
Especially resistant to breakdown caused by
alcohol contamination.
Part No.
Description
LUC10044 ........50 Plus Racing Oil, 1 Quart
LUC10094 ........50 Plus Racing Oil, 2-1/2 Gallon Container
LUC10261 ........70 Plus Racing Oil, 1 Quart
LUC10262 ........70 Plus Racing Oil, 1 Gallon Container
LUC10502 ........20/50 Plus Racing Oil, 1 Quart
LUC20502 ........20/50 Plus Racing Oil, 2-1/2 Gallon Container
142
2011 OPEN WHEEL
Verify piston ring, head gasket and
valve condition. Easy-to-use tool
includes fitting and hose assembly to
test most engines.
A formulation of top quality synthetic bases
and exclusive, high performance additives
delivers extra protection, reduced drag, better
fuel mileage and more horsepower for racing
use. Sold in one quart bottles.
Description
LUC10179 ........Synthetic 0W-30 Oil
LUC10082 ........Synthetic 5W-20 Oil
LUC10049 ........Synthetic 5W-30 Oil
LUC10050 ........Synthetic 10W-30 Oil
LUC10054 ........Synthetic 20W-50 Oil
Engine Break-In Oil Additive
LUC10063
Specially formulated with increased levels of
zinc, oil additive protects camshafts, lifters and
valve train components during critical break-in
period. May also be used to prevent premature
engine wear. Sold in 16 oz. bottle.
80/90 And 85/140 Plus Gear Oils
Formulated with anti-wear and anti-seize agents
to lengthen component life and reduce power
draw. 85/140 Plus Gear Oil is recommended for
stopping leaks and reducing lash in worn gear
sets.
Part No.
Description
LUC10042 ........85/140 Plus Gear Oil, 1 Quart Bottle
LUC10043 ........80/90 Gear Oil, 1 Quart Bottle
LUC10045 ........85/140 Plus Gear Oil, 1 Gallon Container
LUC10046 ........80/90 Gear Oil, 1 Gallon Container
75/90 And 75/140 Synthetic Gear Oils
Pure Synthetic, non-foaming Gear Oils with additives to resist “squeezing out” under extreme pressure. Formulated specifically for high performance
or heavy duty use.
Part No.
Description
LUC10047 ........75/90 Synthetic Gear Oil, 1 Quart Bottle
LUC10048 ........75/90 Synthetic Gear Oil, 1 Gallon Container
LUC10121 ........75/140 Synthetic Gear Oil, 1 Quart Bottle
LUC10122 ........75/140 Synthetic Gear Oil, 1 Gallon Container
G3 Racing Grease LUC10484
A true high temp/low temp friction-free racing grease
with extreme friction reducer to minimize drag. Specially formulated racing grease from Lucas Oil has
been dyno tested and track proven in premier racing
series around the world.
Slick Mist LUC10160
Slick Mist is a polymer paint gloss intensifier, which can also be used on glass,
chrome and vinyl decals. Just spray it
on a wet or dry surface and wipe off to
provide an excellent shine. Sold in 24 oz.
bottle.
X-Tra Heavy Duty Grease
LUC10330
Sheer, stable lubricant has exceptional extreme pressure and water
resistance. Exceeds original equipment “Lube For Life” specifications.
Sold in 1 lb. tubs.
Metal Polish LUC10155
Red “N” Tacky Grease LUC10005
Red, tacky lithium 12-OH Grease, with rust and
oxidation inhibitors and extreme pressure additives,
will withstand heavy loads for long periods of time.
Sold in a 14.5 oz. cartridge.
Cleans, polishes and protects aluminum and
other metals. Built-in elements prolong and protect the treated surfaces from fading, oxidation or
tarnishing. Maximum luster with minimum effort.
Does not contain any acids or ammonia. Sold in
16 oz. bottle.
Racer Series Small Block Chevy Crankshaft
LNTAJ117DN
Sledgehammer Small Block Chevy Crankshaft
LNTAF115AN
Available in 3.750" stroke, crankshaft has the same specifications as the Pro Series, but without the contour work
on the counterweights. Crank has 350 main bearing sizing,
2.100" rod journals and is designed for 6.000" rods. The
#1 and #4 rod journals are drilled to lighten and to enable
balancing.
Non-twist 4340 forged steel crankshaft is 100% American made with
edged and detailed pin arms. Crank
has a 3.480" stroke, 350 main bearing sizing, 2.100" rod journals, and is designed for 5.700"
rods. Machined to GM specs, crank is nitrate heat treated,
sonic cleaned, oil coated and is ideal for street and factory
stocks. Crank accepts a two-piece rear main seal.
Pro Series Small Block Chevy Crankshafts
With Contoured Wing Design
Crankshafts are manufactured from 4340 steel. Rod
journals are drilled with either 7/8" or 3/4" lightening holes
to reduce rotating weight. The leading edges of the counterweights have Lunati’s contoured wings to direct air and oil to
the main bearings rather than the connecting rods. Available
with 3.480" to 4.000" strokes. All crankshafts require chamfered bearings.
Ken Quimby
Part No.
Stroke
Main
Rod Length
Pin Size
LNTAF111DN
LNTAG111DN
LNTAK211DN
LNTAM111DN
LNTAO211DN
3.480"
3.500"
3.800"
3.875"
4.000"
350
350
400
350
400
6.000"
6.000"
6.000"
6.000"
6.000"
2.100"
2.100"
2.100"
2.100"
2.100"
Photo By: Tom Willavize
2011 OPEN WHEEL
143
Power Pak
Domed Piston Kits
Performance
Piston Ring Sets
Forged, domed pistons with radiused
valve pockets are machined for 1.5mm
top, 1.5mm second and 3.0mm oil
rings. Sets of eight include wrist pins,
locks and performance piston rings.
Mahle performance piston
rings, developed with innovative
computer simulation and development tools,
include barrel-faced, plasma moly/ductile iron top
rings, cast iron reverse twist second rings and conventional
three-piece oil rings. Sets listed require file fitting.
Part No.
Bore
Small Block Chevy
MAHSBC550030D11
MAHSBC250030D11
MAHSBC250060D11
MAHSBC125030D11
MAHSBC425030D11
MAHSBC425125D04
MAHSBC125125D04
MAHSBC125155D04
MAHSBC125165D11
4.030"
4.030"
4.060"
4.030"
4.030"
4.125"
4.125"
4.155"
4.165"
Stroke
3.48"/3.50"
3.48"/3.50"
3.48"/3.50"
3.48"/3.50"
3.750"
3.750"
3.750"
3.750"
3.750"
Rod
Length
5.700"
6.000"
6.000"
6.125"
5.700"
5.700"
6.000"
6.000"
6.000"
Comp.
Ht.
1.550"
1.250"
1.250"
1.125"
1.425"
1.425"
1.125"
1.125"
1.125"
Dome Comp.
Volume Ratio
11cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
11cc
13.0:1
13.0:1
13.0:1
13.0:1
13.8:1
13.0:1
13.0:1
13.0:1
14.3:1
Notes: In Addition To The Rod And Stroke Combinations Listed With Each Part Number, Other Rod/
Stroke Combinations May Work. Compression Ratios Are Based On A 64cc Combustion Chamber.
Suspension Components
Swedged Aluminum Radius Rods
Part No.
Bore
MAH4030ML-043
MAH4035ML
MAH4035MS
MAH4035MS-15
MAH4035ML-043
MAH4040ML-043
MAH4045ML
MAH4045MS-15
MAH4045ML-043
MAH4055ML-043
MAH4065ML-043
MAH4070ML-043
MAH4130MS-15
MAH4160MS-15
MAH4170MS-15
4.025"
4.030"
4.030"
4.030"
4.030"
4.035"
4.040"
4.040"
4.040"
4.050"
4.060"
4.065"
4.125"
4.155"
4.165"
Top Ring 2nd Ring
.043"
1/16"
1/16"
1.5mm
.043"
.043"
1/16"
1.5mm
.043"
.043"
.043"
.043"
1.5mm
1.5mm
1.5mm
.043"
1/16"
1/16"
1.5mm
.043"
.043"
1/16"
1.5mm
.043"
.043"
.043"
.043"
1.5mm
1.5mm
1.5mm
Oil Ring
Oil Ring Tension
3.0mm
3/16"
3/16"
3.0mm
3.0mm
3.0mm
3/16"
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
3.0mm
Low
Low
Standard
Standard
Low
Low
Low
Standard
Low
Low
Low
Low
Standard
Standard
Standard
Torsion Arms, Stops And Bushings
Swedged aluminum radius rods have 5/8"
thread with knurling on each end.
Length
1.00" O.D.
1.125" O.D.
1.250" O.D.
14"
16"
17"
18"
18.5"
19"
19.5"
20"
20.5"
21"
21.5"
22"
22.5"
23"
23.5"
24"
24.5"
25"
26.5"
27"
28"
29"
36"
37"
38"
39"
40"
41"
42"
43"
44"
45"
46"
47"
48"
49"
50"
MWASR-14
MWASR-16
MWASR-17
MWASR-18
–
MWASR-19
–
MWASR-20
MWASR-20.5
MWASR-21
MWASR-21.5
MWASR-22
MWASR-22.5
MWASR-23
MWASR-23.5
MWASR-24
MWASR-24.5
MWASR-25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MWASR-18L
MWASR-18.5L
MWASR-19L
MWASR-19.5L
MWASR-20L
MWASR-20.5L
MWASR-21L
MWASR-21.5L
MWASR-22L
MWASR-22.5L
MWASR-23L
MWASR-23.5L
MWASR-24L
–
MWASR-25L
MWASR-26.5L
MWASR-27L
MWASR-28L
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MWASR125-28
MWASR125-29
MWASR125-36
MWASR125-37
MWASR125-38
MWASR125-39
MWASR125-40
MWASR125-41
MWASR125-42
MWASR125-43
MWASR125-44
MWASR125-45
MWASR125-46
MWASR125-47
MWASR125-48
MWASR125-49
MWASR125-50
144
2011 OPEN WHEEL
MWATA19L
Part No.
Torsion Arms
Description
MWALRTA17-3 ......... Left Rear Torsion Arm
MWARRTA15-5 ......... Right Rear Torsion Arm
MWATA17A ............... Front Torsion Arm, LW 17" With 10° Of Angle
MWATA17L ............... Front Torsion Arm, LW 17"
MWATA19L ............... Front Torsion Arm, LW 19"
MWATA19OS ............ Front Torsion Arm, “S”-Bend
Torsion Stops
MWATS-175 .............. Torsion Stop, 1.75" Split
MWATS-200 .............. Torsion Stop, 2.00" Split
Bronze Bushings
MWABB-095 ............. Torsion Bushing .095" Tubes
MWABB-120 ............. Torsion Bushing.120" Tubes
Delrin® Plastic Bushings
MWADB-095 ............. Delrin® Plastic
Torsion Bushing, .095"
MWADB-120 ............. Delrin® Plastic
MWADB-095
Torsion Bushing, .120"
“T-Bar” Torsion Bars
Part No.
Description
MWATB30-975 .......... 4340 Torsion Bar, 975
MWATB30-1000 ........ 4340 Torsion Bar, 1000
MWATB30-1025 ........ 4340 Torsion Bar, 1025
MWATB30-1050 ........ 4340 Torsion Bar, 1050
MWATS-175
MWADB-120