Linear actuator Palon S - elero GmbH
Transcription
Linear actuator Palon S - elero GmbH
Palon S Electromechanical spindle drive for automatic bollards Rising just 2.5 time seconds * The areas of application for the Palon S are automatic bollard lowering devices for securing and blocking paths, parking spaces and work areas. Thanks to the integrated limit switches, the Palon S can be incorporated quickly without additional controls. Compared with hydraulic drive systems, it is especially environment-friendly as it does not require any oil. Features · Low energy consumption · Maintenance-free throughout service life · Water-tight aluminium housing · Integrated end position limit switch · Direct parallel connection for several drives Options · Integrated heating · Operation possible via uninterrupted supply voltage (USV) for safety-relevant applications · End position feedback (non-isolated) · Radio remote control Types of fastening · · · · Articulated lug Threaded pin (piston end) Joint rod head (DIN 648) Flange attachment * Depending on travel range Palon S Technical specifications Variants Housing diameter (mm) Rated voltage Rated current (A) Power consumption (VA) Adjusting force (N) Stroke length (mm) Stroke speed (mm/s) Rising time (s) Limit switch Capacitor Piston rod Ingress protection (IP) Temperature range (°C) Mounting position Brake 80 230 V 1AC, 50 Hz approx. 2.3 530 400 400, 500, 600 approx. 200 approx. 2.5 * internal, adjustable external secured against rotation 67 -10 to +60 Piston rod upwards Integrated retaining brake Articulated lug, flange, threaded pin (piston end), joint rod head (DIN 648) Aluminium, anodised Fastening Housing material Variant Feedback Heater 230 V 1 x – 2 x x 3 4 – – – x Circuit diagram WS9303 WS9403 Dimensions table Nominal size Stroke length (mm) Body dimension (mm) 1 2 3 400 500 600 882 982 1,082 Accessories • Radio remote control • Hand-held transmitter • Heater * Depending on travel range Fastening options Plan of dimensions for 600 mm stroke length View A piston end -0.1 -0.2 Ø 95 A min. 35 18 Threaded pin 21 min. 85 15 SW4 M 16 Limit switch adjustment 16 ° Ø 16 Body dimension Joint rod head DIN 648 housing end min. 35 -0.1 -0.2 18 Ø 28 16 21 Ø 16 H8 min. 85 42 15 15 ° Joint rod head DIN 648 Ø 16 Please find further technical information on our website www.elero-linear.com in the category Service/Instructions. elero GmbH Linear Drive Technology Technical/Sales Nassaeckerstrasse 11 07381 Poessneck/Germany T +49 3647 4607-0 F +49 3647 4607-42 Order processing Linsenhofer Strasse 65 72660 Beuren/Germany T +49 7025 13-02 F +49 7025 13-290 Flange with Ø 6.5 hole (4x) Articulated lug fixed Length = Body dimension+ min. setting 15 min. setting 42 Ø 80 Ø 110 [email protected] www.elero-linear.com Subject to change! EN-2011565/0813 Ø 28 45° Stroke min. 37 max. setting = min. setting + stroke Ø 28 Ø 16 H8 Articulated lug fixed 45° Ø 28 16