web instruction template.indd

121100
ASSEMBLY INSTRUCTION
4P/4QRTL & Q
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS AND VOLUME CONTROL VALVE
4PRTL & 4QRTL
4PRTQ & 4QRTQ
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living finishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
1
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4PR000 ( 3 / 4 ˝ ) /
4QR000 ( 1 / 2 ˝ )
Rough-In Valve
9YTCSKN1A
Tie Down
Screw
9YTCSPL3A
Trim Plate
4P-4QRTL & Q
9X0RTFA1E
Flange
9Y0RTHACA
Lever Handle
Assembly
9XWSH0021
Washer
9XTCSHA9B
Handle Adapter
9YTCSPL1C
Valve Sleeve
9YTCSKN1A
Tie Down Nut
9YTCSHA9B
L-shape
Handle
9XSCRHA08
Screw Handle
9YTCSHA9A
Temperature
Control Handle
9Y0RTHADA
Square Handle
Assembly
2
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4P-4QRTL & Q
1
2 7/8˝ MIN wall limit
2 1/4˝ MAX wall limit
APPROX 3 1/4˝
APPROX 4 1/2˝
LEAVE OPENING FOR ACCESS TO STOPS
WHEN CUTTING THE WALL TILES
* If PEX piping is to be used, do not use PEX with a diameter of less than 3/4˝ between the valve and the tub spout.
Smaller diameter piping and fittings will cause stacking in the shower outlet.
3
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4P/4QRTL & Q
2
* Mark Threaded Sleeve 7/8˝ from the
finished wall. Also mark the Cartridge
Splines 1 5/8˝ from the finished wall.
Cut both sleeve and spline as marked.
7/8˝
PIPE CLAMP
RECOMMENDED
FOR ROUGH-IN
1 5/8˝
r)
r&
* Make sure the water is discharging
at approximately 38 °C (100 °F) by
adjusting the Valve Stem
4
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4P/4QRTL & Q
3
5
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4P-4QRTL & Q
4
Turn cartridge spline into
closed position before
installing handles
Must tighten Flange
using wrench
* Install Handle with the Over-ride Button
at 12 o’clock position as shown
6
TEMPERATURE CONTROL VALVE WITH BUILT-IN STOPS WITH
VOLUME CONTROL VALVE
4P-4QRTL & Q
5
7
FEATURES:
- Brass construction with choice of 21 finishes
- Lever or square handle for Shut-Off Volume Control Valve
- Single handle Mixer control
- Factory preset at 38ºC (100.4ºF)
- Temperature range from 15ºC (59ºF) to 60ºC (140ºF)
- Safety stop with override function
178
7"
48" TO FLOOR TYPICAL
203
8"
1/2" NPT
3/4" NPT
ALL PORTS
178
7"
48" TO FLOOR TYPICAL
203
8"
1/2" NPT
3/4" NPT
ALL PORTS
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at: 905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com