hydraulic pullers
Transcription
hydraulic pullers
Twin Leg 287 Triple Leg 288 Twin Leg Kits 289 Twin / Triple Leg Kits 290-292 Separator Kits Internal / External Puller & Separator Kits 297 Internal Extractor, Puller & Separator Kits 298-301 Kit Contents List 302-303 Illustrations 304-308 Spare Parts 309 310-311 P FOR USE WITH PETROL ENGINES BELT FOR USE WITH BELT DRIVEN ENGINES D FOR USE WITH DIESEL ENGINES CHAIN FOR USE WITH CHAIN DRIVEN ENGINES www.sykes-pickavant.com Email: [email protected] 294-296 Merchandisers DO NOT USE AIR TOOLS Tel: 01543 679900 293 Puller & Separator Kits KEY HYDRAULIC PULLERS HYDRAULIC PULLERS 285 HYDRAULIC PULLERS Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel and then heat treated for extra strength and durability. Pullers are normally classified as either hydraulic or mechanical with many different types within these two styles. Choosing the right puller for the job Estimate out what ‘force’ is required. More force may be required for rusted parts or where there is a large area of surface contact. Hydraulic pullers enable maximum force to be applied with minimum effort. Alternatively, choose a puller whose force screw diameter is at least half the size of the shaft of the item to be removed. If in doubt, use the next largest - using an undersized puller will slow down the job and lead to frustration. Decide what ‘spread’ is required. This is determined by the width of the part to be pulled. Always use a 3 leg puller if possible. This gives a better load distribution and is much safer in use. Decide what ‘reach’ is required. This must be at least equal to or larger than the depth of the part which needs removal. HYDRAULIC PULLERS Types of Puller Blind Housing Bearing Removers These operate without the need to dismantle machinery or remove the running shaft. Hydraulic Pullers These have a simple, grease-filled ram instead of a mechanical force screw, producing extra power with ease. The spring loaded plunger provides direct, non twisting application of thrust which is more effective and more secure. Separators For where all round support is required or where there is insufficient space for standard puller legs. Loadstar Hydraulic Pullers Various styles available; Loadstar 8, 12 & 20 Tonne and Loadstar ‘Plus’ 20, 30 & 50 Tonne. For heavy duty pulling and extracting. Slide Hammers Used when there is no shaft, making a conventional puller unsuitable. Mechanical Pullers These use a mechanical force screw. Split Collet Extractors For blind housing internal use. The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet. Thin Jaw Pullers These have special legs for use where clearance is limited behind the gear or bearing race. Available in both hydraulic and mechanical. Quick Reference Guide Puller Spread Max mm 286 Puller Reach Max mm External Reach Max mm Adaptor 2 & 3 Leg Diameter Kits Safe Working Load (tonnes) Ram Extension mm External Spread mm Internal Spread mm Part No. Hydraulic 1500 series Hydraulic Twin Leg Pullers • Removes gears, bearings, pulleys and sprockets. • Wide range of automotive and industrial applications. • Powered by 1500 series hydraulic ram. • Safe and easy to use. • 8 tonnes of force with minimum effort. • Easy to adjust. • Non-twisting for improved stability. • Supplied with nose piece for use on centred shafts. Each part number contains: 1 x Hydraulic Ram 1 x Twin Head Assembly or Sliding Beam 1 x Ram Extension 2 x Legs Tel: 01543 679900 HYDRAULIC PULLERS Standard Twin Leg Pullers • Self centering and self locking. • Redesigned legs, improving strength. • Supplied in carton. • Refer to pages 304-308 for component illustrations. Specifications Part No. Puller Spread mm Puller Reach Max mm Ram Extension mm 15240000 50 - 100 100 50 15260000 75 - 150 150 100 15270000 75 - 150 250 150 15280000 100 - 200 200 150 15290000 130 - 250 250 150 15280000 HYDRAULIC PULLERS Standard Leg Thin Jaw Twin Leg Pullers • Thin jaws enable access where clearance behind components is limited. • Supplied in carton. • Refer to pages 304-308 for component illustrations. Thin Jaw Leg 18620000 Part No. Puller Spread mm Puller Reach Max mm Ram Extension mm 18610000 50 - 150 150 50 18630000 50 - 150 225 150 18620000 50 - 225 225 150 www.sykes-pickavant.com Email: [email protected] Specifications 287 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Triple Leg Pullers • Removes gears, bearings, pulleys and sprockets. • Wide range of automotive and industrial applications. • Powered by 1500 series hydraulic ram. • Safe and easy to use. • 8 tonnes of force with minimum effort. • Easy to adjust. • Non-twisting for improved stability. • Supplied with nose piece for use on centred shafts. Each part number contains: 1 x Hydraulic Ram 1 x Triple Head Assembly or Sliding Beam 1 x Ram Extension 3 x Legs Standard Triple Leg Pullers • Self centering and self locking. • Redesigned legs, improving strength. • Supplied in carton. • Refer to pages 304-308 for component illustrations. Specifications HYDRAULIC PULLERS Standard Leg 15390000 Part No. Puller Spread Min - Max mm Puller Reach Max mm 15340000 50 - 100 100 50 15360000 75 - 150 150 100 Ram Extension mm 15370000 75 - 150 250 150 15380000 100 - 200 200 150 15390000 130 - 250 250 150 Thin Jaw Triple Leg Pullers • Thin jaws enable access where clearance behind components is limited. • Supplied in carton. • Refer to pages 304-308 for component illustrations. Specifications Thin Jaw Leg 18650000 288 Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 18640000 50 - 150 150 50 18650000 50 - 150 225 150 Hydraulic 1500 series Hydraulic Twin Leg Puller Kits 15490000 Hydraulic Twin Leg Puller Kit • Makes 2 different pullers. • Self centering and self locking. • Redesigned legs, improving strength. Tel: 01543 679900 HYDRAULIC PULLERS Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15490000 75 - 100 150 50 / 100 Spare Parts Part No. 15000000 15241200 15242200 15242400 15262400 15262600 Qty Description 1 1 1 2 1 2 Hydraulic Ram With Nose Piece Twin Head Ram Extension - 50mm Leg 100mm Ram Extension - 100mm Leg 150mm 15400300 Hydraulic Combination Twin Leg Puller Kit • Makes 4 different hydraulic pullers. • Combination standard and thin jaw leg puller. • Refer to pages 304-308 for component illustrations. HYDRAULIC PULLERS Contents Specifications Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15400300 50 - 150 255 50 / 100 Spare Parts Part No. Qty Description 15000000 15242200 15262600 08611400 08621400 15242400 19311200 15262400 15241200 1 1 2 2 2 2 1 1 1 Hydraulic Ram With Nose Piece Ram Extension - 50mm Leg 150mm Leg 150mm - Thin Jaw Leg 225mm - Thin Jaw Leg 100mm Twin Beam Ram Extension - 100mm Twin Head Assembly www.sykes-pickavant.com Email: [email protected] Contents 289 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Twin/Triple Leg Puller Kits 15340500 Hydraulic Twin/Triple Leg Puller Kit • Combination twin/triple leg puller kits complete with ram extensions, offer a wide range of pulling options. • Makes 2 different twin/triple leg pullers. • Wide range of kits to suit most applications. • Supplied in carton. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15340500 50 - 100 100 50 15340500 HYDRAULIC PULLERS Contents Spare Parts Part No. 15000000 15241200 15341300 15242200 15242400 Qty Description 1 1 1 1 3 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Leg - 100mm 15500000 and 15500300 Hydraulic Twin/Triple Leg Puller Kits • Makes 3 different twin/triple leg pullers. • Supplied in metal case (p/n 15500000) or in carton (p/n 15500300). • Refer to pages 304-308 for component illustrations. Specifications Standard Leg 15500300 Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15500000 75 - 150 150 50 / 100 15500300 75 - 150 150 50 / 100 Contents for 15500000 and 15500300 Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15242400 15262600 290 Qty Description 1 1 1 1 1 3 3 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Leg - 100mm Leg - 150mm Tel: 01543 679900 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Twin/Triple Leg Puller Kits 15500800 Hydraulic Twin/Triple Leg Puller Kit • Makes 6 different twin/triple leg pullers. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. 15500800 Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15500800 50 - 200 200 50 / 100 Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15242400 15262600 15282800 Qty Description 1 1 1 1 1 3 3 3 Hydraulic Ram with Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Leg - 100mm Leg - 150mm Leg - 200mm 15510500 Hydraulic Twin/Triple Leg Puller Kit • Makes 8 different twin/triple leg pullers. • Supplied with metal storage display panel. • Refer to pages 304-308 for component illustrations. 15510500 (610 x 457mm) HYDRAULIC PULLERS Contents Specifications Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15510500 50 - 250 250 50 / 100 / 150 Contents Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15292900 Qty 1 1 1 1 1 1 3 3 3 3 Description Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm (Extra Wide) www.sykes-pickavant.com Email: [email protected] Standard Leg 291 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Twin/Triple Leg Puller Kits 15510000 15510000 Hydraulic Twin/Triple Leg Puller Kit • Makes 10 different twin/triple leg pullers. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 15510000 50 - 250 250 50 / 100 / 150 HYDRAULIC PULLERS Contents Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 Qty Description 1 1 1 1 1 1 3 3 3 3 3 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm (extra wide) 18650400 18650400 and 18650500 Hydraulic Twin/Triple Leg Puller Kits - Thin Jaw • Makes 5 different hydraulic and 1 mechanical thin jaw puller. • Supplied in metal case (p/n 18650400) or on display/storage panel (p/n 18650500). • Refer to pages 304-308 for component illustrations. Specifications for 18650400 and 18650500 18650500 (610 x 457mm) Part No. Puller Spread Min - Max mm Puller Reach Max mm Ram Extension mm 18650400 & 18650500 50 - 225 225 50 / 150 Contents for 18650400 and 18650500 Spare Parts Part No. 15000000 15242200 15272600 08601200 18621200 18651300 19311200 08601400 08621400 08271100 08611400 292 Qty 1 1 1 1 1 1 1 2 3 1 3 Description Hydraulic Ram With Nose Piece Ram Extension - 50mm Ram Extension - 150mm Twin Beam Twin Beam Triple Beam Twin Beam Leg 75mm - Thin Jaw Leg 225mm - Thin Jaw Forcing Screw 12 X 1.75 X 150mm Leg 150mm - Thin Jaw Hydraulic 1500 series Hydraulic Separator Kits For individual separators see page 263 of Mechanical section 19310000 Hydraulic Separator Kit • Versatile tool where a long reach is required to draw a bearing from a shaft. • Also available without hydraulic ram as kit 19310100 (in carton). • The tapered edges of the bearing separator provide all round support and can fit behind bearings where normal puller legs cannot gain access. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Tel: 01543 679900 HYDRAULIC PULLERS 19310000 Specifications Part No. 19310000 External Spread External Reach Min - Max mm Max mm 20 - 105 876 Contents Qty 1 1 1 1 2 4 2 Description Hydraulic Ram With Nose Piece Ram Extension - 100mm Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch HYDRAULIC PULLERS Spare Parts Part No. 15000000 15262400 19311200 09510000 09311500 09311900 09312300 19320000 Hydraulic Separator Kit - Heavy Duty • Versatile tool where a long reach is required to draw a bearing from a shaft. • Also available without hydraulic ram as kit 19320100 (in carton). • The tapered edges of the bearing separator provide all round support and can fit behind bearings where normal puller legs cannot gain access. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. 19320000 Part No. 19320000 External Spread External Reach Min - Max mm Max mm 35 - 140 863 Contents Spare Parts Part No. 15000000 15272600 19321200 09520000 09321500 09321900 09322300 Qty Description 1 1 1 1 2 4 2 Hydraulic Ram With Nose Piece Ram Extension - 150mm Twin Beam Separator 35-140mm Main Rod Extension Rod Extension Rod 5 inch www.sykes-pickavant.com Email: [email protected] Specifications 293 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Puller & Separator Kits 19310300 Hydraulic Puller & Separator Kit - Thin Jaw • Combination pack consisting of a medium duty hydraulic thin jaw puller and bearing separator. • Also available without hydraulic ram as kit 19310400 (in carton). • Supplied in carton. • Refer to pages 304-308 for component illustrations. Specifications Part No. 19310300 19310300 External Spread External Reach Min - Max mm Max mm 50 - 105 876 HYDRAULIC PULLERS Contents Spare Parts Part No. 15000000 15262400 08611400 19311200 09510000 09311500 09311900 09312300 Qty Description 1 1 2 1 1 2 4 2 Hydraulic Ram With Nose Piece Ram Extension - 100mm Leg 150mm - Thin Jaw Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch 15520000 15520000 Hydraulic Puller & Separator Kit • Makes 4 different twin/triple leg pullers, plus bearing separator kit. • Supplied in lockable metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15520000 50 - 150 150 External Spread External Reach Min - Max mm Max mm 20 - 105 876 Contents Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15242400 294 Qty Description 1 1 1 1 1 3 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Leg - 100mm Spare Parts Part No. 15262600 19311200 09510000 09311500 09311900 09312300 Qty 3 1 1 2 4 2 Description Leg - 150mm Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch Tel: 01543 679900 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Puller & Separator Kits 15520800 Hydraulic Puller & Separator Kit • Makes 6 different twin/triple leg pullers, plus bearing separator kit. • Supplied in lockable metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15520800 50 - 200 200 External Spread External Reach Min - Max mm Max mm 20 - 105 876 Contents 15000000 15241200 15341300 15242200 15262400 15242400 15262600 15282800 19311200 09510000 09311500 09311900 09312300 1 1 1 1 1 3 3 3 1 1 2 4 2 Description Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Leg - 100mm Leg - 150mm Leg - 200mm Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch HYDRAULIC PULLERS Qty 15520800 Email: [email protected] Spare Parts Part No. www.sykes-pickavant.com 295 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Puller & Separator Kits 15540000 and 15540500 Hydraulic Puller & Separator Kits • Makes 10 different twin/triple leg pullers, plus bearing separator kit. • 15540000 supplied in metal case. • 15540500 supplied with storage/metal display panel. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15540000 50 - 200 200 20 - 105 876 15540500 50 - 200 200 20 - 105 876 External Spread External Reach Min - Max mm Max mm HYDRAULIC PULLERS Contents for 15540000 and 15540500 Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 19311200 09510000 09311500 09311900 09312300 15540500 (1000 x 457mm) Qty Description 1 1 1 1 1 1 3 3 3 3 3 1 1 2 4 2 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm (Extra Wide) Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch 15540000 296 Hydraulic 1500 series Hydraulic Internal/External Puller & Separator Kit 15600000 Hydraulic Internal/External Puller & Separator Kit Tel: 01543 679900 HYDRAULIC PULLERS • For removing bearings, gears etc. where access behind components is too restricted to use standard pullers. • Drop forged, high quality steel, heat treated for strength and durability. • Separators have tapered edge for insertion behind close fitting bearings, gears etc. • Internal puller has screw adjustable legs for positive fit. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Part No. External Spread Min - Max mm 15600000 35 - 140 Internal Spread External Reach Min - Max mm Max mm 40 - 150 15600000 863 Qty Description 1 1 1 1 2 4 2 1 1 1 1 2 Hydraulic Ram With Nose Piece Ram Extension - 150mm Beam Separator 35-145mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Forcing Screw C/W Nut Thrust Race Convertor Protector Email: [email protected] Spare Parts Part No. 15000000 15272600 19321200 09520000 09321500 09321900 09322300 09350000 09311100 09312100 09312200 09322000 HYDRAULIC PULLERS Contents www.sykes-pickavant.com 297 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Internal Extractor, Puller & Separator Kits 15570000 Hydraulic Internal Extractor, Puller & Separator Kit • Makes 10 different twin/triple leg pullers, plus bearing separator kit and internal extractor kit. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15570000 20 - 200 250 External Spread External Reach Min - Max mm Max mm 20 - 105 876 HYDRAULIC PULLERS Contents 298 Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 19311200 09510000 09311500 09311900 09312300 09350000 09311100 09312100 09312200 09312000 Qty Description 1 1 1 1 1 1 3 3 3 3 3 1 1 2 4 2 1 1 1 1 2 Hydraulic Ram with Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm (extra wide) Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Forcing Screw c/w Nut Thrust Race Convertor Protector 15570000 Tel: 01543 679900 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Internal Extractor, Puller & Separator Kits 15580000 Hydraulic Internal Extractor, Puller & Separator Kit • Makes 10 different twin/triple leg pullers, plus heavy duty bearing separator kit and internal extractor kit. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15580000 35 - 250 250 External Spread External Reach Min - Max mm Max mm 35 - 140 863 Qty Description 1 1 1 1 1 1 3 3 3 3 3 1 1 2 4 2 1 1 1 1 2 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm (Extra Wide) Twin Beam Separator 35-145mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Forcing Screw C/W Nut Thrust Race Convertor Protector 15580000 Email: [email protected] Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 19321200 09520000 09321500 09321900 09322300 09350000 09311100 09312100 09312200 09322000 HYDRAULIC PULLERS Contents www.sykes-pickavant.com 299 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Internal Extractor, Puller & Separator Kits 15590000 Hydraulic Internal Extractor, Puller & Separator Kit - Master Set • Makes 10 different twin/triple leg pullers, plus heavy duty bearing separator kit and internal extractor kit. • Supplied in metal case. • Refer to pages 304-308 for component illustrations. Specifications Standard Leg Part No. Puller Spread Min - Max mm Puller Reach Max mm 15590000 20 - 250 250 External Spread External Reach Min - Max mm Max mm 20 - 140 876 HYDRAULIC PULLERS Contents Spare Parts Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 19311200 09510000 09311500 Qty Description 1 1 1 1 1 1 3 3 3 3 3 1 1 2 Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm (Extra Wide) Twin Beam Separator 20-105mm Main Rod Spare Parts Part No. 09311900 09312300 19321200 09520000 09321500 09321900 09322300 09350000 09311100 09312100 09312200 09312000 09322000 Qty 4 2 1 1 2 4 2 1 1 1 1 2 2 Description Extension Rod Extension Rod 5 inch Twin Beam Separator 35-145mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Forcing Screw C/W Nut Thrust Race Convertor Protector Protector 15590000 300 Tel: 01543 679900 HYDRAULIC PULLERS Hydraulic 1500 series Hydraulic Internal Extractor, Puller & Separator Kits 19310500 Hydraulic Internal Extractor, Puller & Separator Kit with Slide Hammer on Panel 19310500 (610 x 457mm) • For removing bearings, gears etc. where access behind components is too restricted to use standard pullers. • Drop forged, high quality steel, heat treated for strength and durability. • Extract components quickly and efficiently when conventional pullers can not be used. • Slide Hammer with 7 split collet internal extractors • Supplied in display/storage panel 610 x 457mm Part No. External Spread Internal Reach External Reach Min - Max mm Min - Max mm Max mm 19310500 10 - 105 6 - 38 876 Contents Description 1 1 2 1 1 2 4 2 1 1 Hydraulic Ram With Nose Piece Twin Beam Leg 75mm - Thin Jaw Separator 10-55mm Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Slide Hammer Spare Parts Part No. 09580900 09581000 09581100 09581200 09581300 09581400 09581500 09582000 09400000 Qty Description 1 1 1 1 1 1 1 1 1 Split Collet Extractor Split Collet Extractor Split Collet Extractor Split Collet Extractor Split Collet Extractor Split Collet Extractor Split Collet Extractor Adaptor Pulling Unit 6.5 - 8mm 8.5 - 10mm 10 - 12mm 12 - 17mm 19 - 22mm 22 - 30mm 30 - 38mm Hydraulic 1500 series 1500 Hydraulic Ram & Accessories 15002400 15000000 1500 Series Hydraulic Ram 15000000 • Grease filled. • Direct force improves stability under load. • Provides maximum withdrawal force of 80kN. 1 1 1500 Series Hydraulic Ram Repair Kit Contents Contents Qty Description Hydraulic Ram Nose Piece (15002700) Qty Description 2 1 1 Seals Grease Installation Instructions 08251900 Hydraulic Ram Convertor • Converts 1500 series hydraulic rams to mechanical, using forcing screw and shock handle. • In addition the impact shock handle to screw has a sliding centre spindle which allows the operator to strike the end when fully loaded. This assists the release of stubborn joints or taper fits. Part No. Qty 08251900 12731100 1 1 HYDRAULIC PULLERS Qty Description Shock Handle 203mm Impact Force Screw 285mm 1.5” X 16 BSW www.sykes-pickavant.com 12731100 Email: [email protected] Spare Parts Part No. 15000000 19311200 08601400 09500000 09510000 09311500 09311900 09312300 09350000 08542100 301 302 19310500 19320000 1 19310100 19310400 19320100 2 1 3 1 2 4 2 1 09311500 09311900 09312300 09400000 2 4 2 1 2 4 2 1 2 4 2 1 2 4 2 1 1 18651300 09510000 1 18621200 1 1 19311200 1 3 08621400 08611400 3 1 1 1 3 2 4 2 1 1 2 4 2 1 1 3 15292900 3 3 3 1 3 3 15282800 1 1 1 15272700 3 15262600 1 3 1 1 15242400 15272600 15262400 1 1 19310300 2 19310000 1 18650500 1 18650400 1 15520800 1 15600000 1 15590000 15242200 15580000 1 3 3 3 3 3 1 1 1 1 15570000 1 2 4 2 1 1 3 3 3 3 3 1 1 1 1 15540000 15341300 2 4 2 1 1 3 3 3 3 3 1 1 1 1 15520000 1 2 4 2 1 1 3 3 1 1 1 1 15510000 1 3 3 3 3 3 1 1 1 1 1 15500800 1 3 3 3 1 1 1 1 15500300 1 3 3 1 1 1 1 15500000 1 3 3 1 1 1 1 15540500 15241200 2 4 2 1 1 3 3 3 3 3 1 1 1 1 1 15530500 1 2 4 2 1 1 3 3 3 3 1 1 1 1 1 2 3 3 3 3 1 1 1 1 1 1 15510500 1 2 2 1 1 1 1 15490000 1 1 2 2 2 2 1 1 1 1 15400300 1 1 3 1 1 18650000 1 1 3 1 1 18640000 1 1 2 1 1 18630000 1 1 2 1 1 18620000 1 1 2 1 1 18610000 1 3 1 1 1 15390000 1 3 1 1 1 15380000 1 3 1 1 1 15370000 1 3 1 1 1 15360000 1 3 1 1 1 1 15340500 1 3 1 1 1 15340000 1 2 1 1 1 15290000 1 2 1 1 1 15280000 1 2 1 1 1 15270000 1 Standard Pullers 2 1 1 1 15260000 1 Thin Jaw Pullers Description Kit Part No. Spare Part No. Pulling Unit Separator 20-105mm 3 1 ( /4-4 /4” ) Main Rod 254mm, 1/2” Dia. Extension Rod 285mm, 1/2” Dia Extension Rod 5” 127mm, 1/2” Dia. Triple Beam Twin Beam Twin Beam 09400000 09312300 09311900 09311500 09510000 18651300 18621200 19311200 08621400 08611400 15292900 Leg 250mm* (10”) (extra wide spread) Thin Jaw Leg 150mm* (6”) Thin Jaw Leg 225mm* (9”) 15272700 15282800 15262600 15242400 15272600 15262400 15242200 Leg 250mm* (10”) Leg 200mm* (8”) Leg 150mm* (6”) 2 Leg 100mm* (4”) Ram Extension 100mm (4”) Ram Extension 150mm (6”) 1 50mm (2”) Ram Extension Triple Head 15341300 (with centre nut) ** Twin Head 1 (with centre nut) ** 15241200 Hydraulic Ram 1 (11/2”Ø) & nose piece 15000000 15240000 15000000 Puller Kits Hydraulic 1500 series - Kit Contents List HYDRAULIC PULLERS HYDRAULIC PULLERS Hydraulic 1500 series Kit Contents List www.sykes-pickavant.com • 1 2 4 2 1 1 1 7 1 1 2 1 • 19310100 • 19310300 • 1 1 1 1 2 1 1 1 1 15540000 1 15570000 1 15580000 1 2 1 1 1 1 15520000 15590000 1 2 1 1 1 1 2 4 2 1 1 15510000 15600000 1 2 2 1 1 1 1 2 4 2 1 1 15500800 15520800 1 1 1 2 2 1 1 1 1 2 4 2 1 1 • 1 2 • 15260000 • 15270000 • 15280000 • 15290000 • 15340000 • 15340500 • 15360000 • 15370000 • 15380000 • 15390000 • 18610000 • 18620000 • 18630000 • 18640000 • 09312200 Beam Convertor 08251900 12731100 08251400 Hub Puller Leg 08542100 09580900 to 09581500 Slide Hammer Split Collet Metal Toolbox 18650000 15400300 15490000 15530500 15540500 18650400 18650500 19310000 19310400 19310500 19320000 19320100 Tel: 01543 679900 * Working dimensions. ** 1 only centre nut supplied with kits. Kit Part No. Description Display Panel or Spare Part No. 08271100 Forcing Screw (12mm Dia.) Extractors (6-38mm) 08601200 09500000 08601400 Twin Beam Impact Force Screw 11/2” Dia. Shock Handle (suits 12731100) Thin Jaw Leg 75mm* (3”) Separator 1055mm 1/3” - 21/4” Dia. 12731200 09322000 09312000 Plunger Body Thread Protector 63mm long Thread Protector 38mm long 09312100 Thrust Race 09350000 09322300 09321900 09311100 09520000 Separator 35140mm (11/4-51/2”) 09321500 19321200 Twin Beam Main Rod 332mm, 5/8” Dia. Extension Rod 272mm, 5/8” Dia. Extension Rod 152mm, 5” 5/8” Dia. Internal Race Extractor 40-150mm (11/2-6”) Screw c/w Nut 09582000 Adaptor • Cardboard Carton 15240000 HYDRAULIC PULLERS 1 15510500 1 7 1 1 2 1 1 Adaptor 095820 Email: [email protected] 09580900 to 09581500 08542100 08271100 08601200 09500000 08601400 08251900 12731100 08251400 12731200 09322000 09312000 09312200 09312100 09311100 09350000 09322300 2 09321900 4 09321500 2 09520000 1 19321200 1 1 Separators Screws Complete with Thrust Nut Combination Twin/Triple Puller 660375 Internal Race Extractors Thrust Races Rod 125mm 09582000 HYDRAULIC PULLERS 15500000 15500300 303 HYDRAULIC PULLERS Hydraulic 1500 Series Hydraulic Puller Component Illustrations Hydraulic Ram Ram Extensions complete with nose piece 15000000 150mm 15272600 Triple Head Assembly 15341300 Twin Head Assembly 15241200 100mm 15262400 Standard Legs (Working Dimensions) 100mm (4”) 150mm (6”) 250mm (10”) 200mm (8”) 250mm (10”) 15242400 15262600 15272700 15282800 15292900 50mm HYDRAULIC PULLERS 15242200 Thin Jaw Legs (Working Dimensions) 150mm (6”) 225mm (9”) 08611400 08621400 Twin Beams 19321200 18621200 19311200 Internal Race Extractor 09350000 Protectors 09322000 Rod Assemblies 09321500 09311500 Triple Beam 18651300 Separators 09520000 09510000 09312000 Screw complete with thrust nut 09311100 Thrust Race 09312100 Rod Extensions Converter 09312200 304 09311900 09312300 09321900 09322300 Hydraulic 1500 Series Hydraulic Puller Kit Build Hydraulic Puller Kits - Twin Leg Part No. 15240000 (P.287) Part No. 15290000 (P.287) Part No. 15260000 (P.287) Part No. 15270000 (P.287) Part No. 15490000 (P.289) Part No. 15280000 (P.287) Tel: 01543 679900 HYDRAULIC PULLERS Part No. 15400300 (P.289) Part No. 15340500 (P.290) Part No. 15360000 (P.288) Part No. 15370000 (P.288) Part No. 15380000 (P.288) Part No. 15390000 (P.288) Hydraulic Puller Kits - Twin/Triple Leg Part No. 15500300 (P.290) Part No. 15500800 (P.291) Part No. 15500000 (P.290) www.sykes-pickavant.com Email: [email protected] Part No. 15340000 (P.288) HYDRAULIC PULLERS Hydraulic Puller Kits - Triple Leg 305 HYDRAULIC PULLERS Hydraulic 1500 Series Hydraulic Puller Kit Build cont. Twin/Triple Leg Puller Kits Part No. 15510000 (P.292) Part No. 15510500 (P.291 & 311) Twin/Triple Leg Puller/Separator Kits HYDRAULIC PULLERS Part No. 15520000 (P.294) Part No. 15520800 (P.295) Part No. 15540000 (P.296) Part No. 15540500 (P.296 & 310) Internal/External Puller/Separator Kits Part No. 15570000 (P.298) Part No. 15580000 (P.299) 306 Tel: 01543 679900 HYDRAULIC PULLERS Hydraulic 1500 Series Hydraulic Puller Kit Build cont. Internal/External Puller/Separator Kits Part No. 15590000 (P.300) Thin Jaw Puller Kits - Twin Leg Part No. 18610000 (P.287) Part No. 18620000 (P.287) Part No. 18630000 (P.287) HYDRAULIC PULLERS Part No. 15600000 (P297) Thin Jaw Puller Kits - Triple Leg Part No. 18650000 (P.288) Email: [email protected] Part No. 18640000 (P.288) Part No. 18650400 (P.292) Part No. 18650500 (P.292 & P.310) www.sykes-pickavant.com 307 HYDRAULIC PULLERS Hydraulic 1500 Series Hydraulic Puller Kit Build cont. Thin Jaw Puller/Separator Kits Part No. 19310000 (P.293) HYDRAULIC PULLERS Part No. 19310300 (P.294) Part No. 19310400 (P.294) Part No. 19310500 (P.301 & 311) Part No. 19320000 (P.293) 308 Part No. 19310100 (P.293) Part No. 19320100 (P.293) 660375 Combination Standard AdjustablePuller Twin/Triple Leg Assemblies Combination Double Ended Reversible 660375 Leg Assemblies Twin/Triple Puller 660375 Double Ended Reversible Leg Assemblies Thrust Race Thrust Races nut Triple Screws Beams Force Rod 125mm Triple Beams Separators Force Screws Separators Force ScrewsRod Assemblies Ramlong Extension ws Rod Extensions Separators Separators e Screws Force Screws ce Rod 125mm Twin Heads Separators Separators Rod Extensions short e Ended Reversible le Ended Reversible eg Assemblies Triple Beams nded Reversible Leg Assemblies Twin Heads Assemblies Triple Beams Triple Beams Protectors Protectors Rod Extensions short 1½” Dia. Internal 15242200 50mm (2”) 15262400 100mm (4”) Rod 125mm Extension 15272600 StandardSeparators Leg piece djustable Beams emblies 1½” Dia. Internal Thrust Races Ram Extension Twin Heads Heads d Adjustable Screws Completelong with Thrust Nut ard Adjustable Twin HeadsRod Extensions Ram Triple Beams Assemblies Separators Twin Heads Assemblies Separators Protectors Force Screws m Screws withThrust Thrust Rod Extensions short ScrewsComplete Complete with NutNut 15241200 15341300 Screws Complete with Thrust Nut (Centre Nut - 15241400) Screws Complete with Thrust Nut e 1½” Dia. External Dimension Thrust Races Triple Head with centre nut Rod Assemblies Rod 125mm 15000000 Converter 093122 Separators Separators Thrust Race 093121 Internal Race Extractors Hydraulic Ram with nose piece Thin Jaw Leg Assemblies (Nose Piece - 15002700) Head with centre Thin Jaw Leg AssembliesThrust Twin Twin Heads Races Twin Heads (Centre Nut - 15241400) Internal Race Extractors Part No. Rod Extensions long Triple Heads Description Triple Heads 150000 150mm (6”) Rod 125mm 15242400 165mm Long (100mm (4”) Working Dimensions) Screws Complete with Thrust Nut Screws Complete with Thrust Nut Standard LegComplete with Thrust Nut 15262600 Screws 215mm Long (150mm (6”) Working Dimensions) Combination Combination ScrewsComplete Completewith withThrust ThrustNut Nut Twin/Triple Puller Screws Twin/Triple Puller 660375 Wide Standard Legwith Thrust Nut 660375 Screws Complete Beams ersible es win Beams Twin Beams djustable Triple Beams Adjustable emblies Heads Adjustable emblies Force Screws emblies 15282800 265mm Long (200mm (8”) Working Dimensions) 15272700 300mm Long (250mm (10”) Working Dimensions) 15292900 300mm Long (250mm (10”) Working Dimensions) 08611400 215mm Long (150mm (6”) Working Dimensions) 08621400 290mm Long (225mm (9”) Working Dimensions) 18621200 290mm Long 1½” Dia. Internal 19311200 210mm Long 1½” Dia. Internal Twin Heads 19321200 290mm Long 1½” Dia. Internal Internal Race Extractors InternalRace RaceExtractors Extractors Internal Internal Race Extractors Internal Race Extractors Triple Beam Rod 125mm 18651300 1½” Dia. Internal 09500000 10-55mm (3/8” - 21/4”) Screws Combination Twin/Triple Puller 660375 Combination Internal Race Extractors Twin/Triple Puller 660375 Standard Leg Separators eg Assemblies nded Reversible rd Adjustable riple Heads Triple ndedHeads Reversible Assemblies Assemblies nded Reversible Twin Heads Assemblies ssemblies Assemblies Internal Race Extractors tectors Beams Triple Beams ns Beams Thrust Races complete with nose piece 150000 Twin Beams ong hort ded Reversible Extensions short Extensions short ssemblies g Assemblies ThrustRaces Races Thrust Standard Adjustable Rod125mm 125mm Rod Rod LegExtension Assemblies Internal Race Extractors Rod 125mm Double Ended Reversible RodRod 125mm 125mm Leg Assemblies 125mm Extension RodRod 5 inch Double Ended Reversible Leg Assemblies Internal Race Extractor Thrust Race Combination 093121 Puller Twin/Triple Twin Beams Thrust Races Thrust660375 Race Forcing Screw c/w Nut Separators 093121 Converter Twin Beams Thrust Race 093122 Beam Convertor Converter Rod 125mm 093122 Internal Race Extractors Triple Heads Protector Rod 125mm Thrust Races Screws Complete with Thrust Nut 09510000 20-105mm (3/4” - 41/4”) 09520000 35-140mm (11/4” - 51/2”) 09311500 254mm long (1/2” x 16 BSF) 09321500 332mm long (5/8” x 14 BSF) 09311900 285mm long (1/2” x 16 BSF) 09321900 272mm long (5/8” x 14 BSF) 09312300 127mm long (1/2” x 16 BSF) 09322300 152mm long (5/8” x 14 BSF) 09350000 40 - 150mm 09311100 Forcing Screw c/w Nut 09312100 - 09312200 - 09312000 63mm long (1/2” x 16 BSF) 38mm long (5/8” x 14 BSF) 08601200 Complete with Thrust Nut Combination Twin/Triple Puller 660375 Combination Twin/Triple Puller 660375 09322000 Screws Complete with Thrust Nut Triple Heads Twin Beam riple Beams Internal Race Extractors - Internal Race Extractors Thin Jaw Leg Assemblies short long mblies Thrust Races lies Internal Race Extractors Force Screws semblies able es Combination TriplePuller Beams SeparatorTwin/Triple 660375 Thrust Races Standard Adjustable Thrust Races Thrust Races Screws Complete with Thrust Nut Main Rod Thrust Races Leg Assemblies ssemblies Assemblies od Assemblies Assemblies ectors Separators Internal Race Extractors Rod 125mm Rod 125mm Separators Beams nsions short Separators Triple Beams Protectors eg Assemblies Protectors eg Assemblies w Leg Assemblies Twin Heads Twin Heads Thrust Races Thrust Races Rod 125mm Extensions Triple Headslong Extensions long Twin/Triple Puller 660375 Twin Beam Thrust Races odHeads Assemblies e od Assemblies justable e Heads mblies e Heads nsions long Internal Race Extractors Force Screws Combination Internal Race Extractors Combination Puller complete with nose piece Twin/Triple Combination Combination Combination Twin/Triple 660375 Puller Leg - Thin Jaw Rod 125mm Twin/Triple Puller Twin/Triple Puller 150000 Twin/Triple Puller 660375 Complete with Thrust Nut 660375 Force Hydraulic RamScrewsCombination 660375 660375 Screws le Ended Reversible nsions long blies Leg Assemblies short wnsions Leg Assemblies w Leg Assemblies Beams nsions long Heads long ensions Extensions long ensions long nsions short Extensions short ensions short ensions short tectors Protectors otectors g Assemblies otectors WideInternal Standard RaceLeg Extractors Thrust Races Hydraulic Ram HYDRAULIC PULLERS Combination Twin/Triple Puller 660375 Email: [email protected] Hydraulic Ram complete with nose piece Image Thrust Force ScrewsRaces Force Screws piece Standard Adjustable Leg Assemblies Hydraulic Triple Puller Heads Component Dimensions (Actual) Converter 093122 m m piece Internal Race Extractors Combination Twin/Triple Puller 660375 Twin Beams Twin Beams Thrust Race Converter 093121 Internal Race Extractors Twin 093122 Beams Rod Assemblies Hydraulic Puller Spare Parts Internal Race Extractors Thin Jaw Leg Assemblies Double Ended Reversible Leg Assemblies Triple Beams Twin Heads Force Screws Hydraulic 1500 Series 093121 Combination Twin/Triple Puller 660375 Tel: 01543 679900 HYDRAULIC PULLERS www.sykes-pickavant.com 309 HYDRAULIC PULLERS Puller Merchandisers Merchandisers = For storage/display. = Complete with lockable hooks. = Powder coated metal board with vinyl overlay. = Panels and hooks are available separately. 15540500 HYDRAULIC PULLERS Hydraulic Puller & Separator Kit 15540500 Contents Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15272700 15292900 19311200 09510000 09311500 09311900 09312300 15542800 15542900 Qty 1 1 1 1 1 1 3 3 3 3 3 1 1 2 4 2 1 1 Description Hydraulic Ram with Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Leg - 250mm Twin Beam Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch Metal Panel 1000mm x 457mm Hook Kit 18650500 Hydraulic Puller Kit - Thin Jaw 18650500 Contents Part No. 15000000 15242200 15272600 08601200 18621200 18651300 19311200 08601400 08621400 08271100 15512800 08652900 310 Qty 1 1 1 1 1 1 1 3 3 1 1 1 Description Hydraulic Ram with Nose Piece Ram Extension - 50mm Ram Extension - 150mm Twin Beam Twin Beam Triple Beam Twin Beam Leg 75mm - thin jaw Leg 225mm - thin jaw Forcing Screw Metal Panel 610mm x 457mm Hook Kit Puller Merchandisers Merchandisers 19310500 15510500 Hydraulic Internal Extractor Puller & Separator Kit Hydraulic Puller Kit Tel: 01543 679900 HYDRAULIC PULLERS (with slide hammer) 15510500 Contents Description Hydraulic Ram With Nose Piece Twin Head Triple Head Ram Extension - 50mm Ram Extension - 100mm Ram Extension - 150mm Leg - 100mm Leg - 150mm Leg - 200mm Leg - 250mm Metal Panel 610mm X 457mm Hook Kit 19310500 Contents Part No. 15000000 19311200 08601400 09500000 09510000 09311500 09311900 09312300 09350000 08542100 09580900 09581000 09581100 09581200 09581300 09581400 09581500 09582000 09400000 15512800 19312900 15530500 Comprehensive Hydraulic Puller/Separator/Extractor Kit = Combines p/n 15510500 and 19310500 above to make the most comprehensive set of pulling, separating and extracting options available. = Ideal workshop set for applications where a wide variety of pulling and extracting problems are likely to be encountered on daily basis. = Supplied on 2 x wall mounted storage panels for ease of use and access. = Refer to the contents list above. www.sykes-pickavant.com Qty 1 1 2 1 1 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Hydraulic Ram With Nose Piece Twin Beam Leg 75mm - Thin Jaw Separator 10-55mm Separator 20-105mm Main Rod Extension Rod Extension Rod 5 inch Internal Race Extractor Slide Hammer Split Collet Extractor 6.5 - 8mm Split Collet Extractor 8.5 - 10mm Split Collet Extractor 10 - 12mm Split Collet Extractor 12 - 17mm Split Collet Extractor 19 - 22mm Split Collet Extractor 22 - 30mm Split Collet Extractor 30 - 38mm Adaptor Pulling Unit Metal Panel 610mm X 457mm Hook Kit HYDRAULIC PULLERS Qty 1 1 1 1 1 1 3 3 3 3 1 1 Email: [email protected] Part No. 15000000 15241200 15341300 15242200 15262400 15272600 15242400 15262600 15282800 15292900 15512800 15512900 311 HYDRAULIC PULLERS HYDRAULIC PULLERS 312 FOR THE LATEST PRODUCT INFORMATION VISIT OUR NEW WEBSITE: www.sykes-pickavant.com
Similar documents
photo printers
Optical/200x Digital Zoom, Super Night Mode, RGB Filter, Built in Flash, 16:9, 2.5" LCD, DiG!C DV, Super Slim Design
More information