Burnet Machine Works

Transcription

Public Auction
NT
A
D
PL SE
O
CL
EV
MU ERY
ST THI
SE NG
LL
!
PLANT CLOSED
BURNET MACHINE WORKS, INC.
LATE MODEL CNC MACHINE SHOP, MANUAL MACHINES & TREPANNING
20300 FM 963 - LAMPASAS, TX 76550
TUESDAY, FEBRUARY 23RD @ 9:00 A.M. CST
Inspection: Monday, February 22nd, From 8:00 A.M. - 4:00 P.M. CST
5
AXIS
16
CNC
LATHES
KURAKI KBM-11A 5-AXIS CNC HORIZONTAL BORING MILL
MAZAK POWER MASTER N 2-AXIS CNC TURNING CENTER
4
AXIS
2
AVAIL.
HAAS VF-6/50 CNC VERTICAL MACHINING CENTER
in
r As set s in
to
oll
ar s
Tur n
u
Yo
D
g
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
103776_Burnet.indd 1
SIG / AXELSON CNC DEEP HOLE / TREPANNING / EJECTOR
DRILLING MACHINE
European Headquarters
6 Hill End Close, Norwood Green
Halifax, West Yorkshire, HX3 8RH
Tel / Fax 07836.347880
[email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5
Tel 902.852.5331 Fax 704.821.4325
[email protected]
2/1/16 3:29 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, FEBRUARY 22ND FROM 8:00 A.M. - 4:00 P.M. CST
2005
2008
DAEWOO DOOSAN INFRACORE DHP-630 DIAMOND SERIES 4-AXIS TOYODA FA630 4-AXIS CNC HORIZONTAL MACHINING CENTER
CNC HORIZONTAL MACHINING CENTER
(2) CNC HORIZONTAL MACHINING CENTERS
DAEWOO DOOSAN Model Infracore DHP-630 Diamond Series 4-Axis
CNC Horizontal Machining Center with 25” x 25” Pallet Changer, 40” XAxis, 34” Y-Axis, 30” Z-Axis Travels, 1°, 50 Taper Spindle Speeds to 12,000
RPM, 60 ATC, 30 HP, High Pressure Thru Spindle Coolant, Chip Conveyor,
FANUC Series 18i-MB CNC Control, sn:HP63074, mfg.2005
TOYODA Model FA630 4-Axis CNC Horizontal Machining Center with 25”
x 25” Pallet Changer, 40” X-Axis, 34” Y-Axis, 30” Z-Axis Travels, 1°, 50
Taper Spindle Speeds to 6000 RPM, 60 ATC, 30 HP, High Pressure Thru
Spindle Coolant, Chip Conveyor with Auxiliary Pumps & Tanks for Gun
Drilling Operation, FANUC 15M CNC Control, sn:NM7784, Refurbished in
2008
AERCOLOGY Mist Collector, sn:45233
4
AXIS
2004
Download a lot book at www.asset-sales.com
HAAS VF-6/50 CNC VERTICAL MACHINING CENTER
Contact us at (888) 800-4442
(8) CNC VERTICAL MACHINING CENTERS
HAAS Model VF-6/50 CNC Vertical Machining Center with 28” x 64” Table, 64”
X-Axis, 32” Y-Axis, 30” Z-Axis Travels, Wired for 4th Axis, 30 ATC, 50 Taper
Spindle Speeds to 7,500 RPM, 30 HP, 2 Speed Gear Drive, Thru Spindle Coolant,
Chip Auger, Remote Pulse Generator, HAAS CNC Pendant Control, sn:1065484,
mfg.2004
HAAS Model VF-4 CNC Vertical Machining Center with 18” x 52” Table, 50”
X-Axis, 20” Y-Axis, 25” Z-Axis Travels, 20 ATC, 40 Taper Spindle Speeds to 7,500
RPM, 20 HP, 2 Speed Gear Head, Chip Auger, Remote Pulse Generator, HAAS
CNC Pendant Control, sn:21727, mfg.2000
MORI SEIKI Model MV45B/40 CNC Vertical Machining Center with 18” x 48”
Table, 40” X-Axis, 20” Y-Axis, 20” Z-Axis Travels, 30 ATC, 40 Taper Spindle
Speeds to 6,000 RPM, Chip Pan, Work Light, FANUC 10M CNC Pendant Control,
sn:1081
2000
HAAS VF-4 CNC VERTICAL MACHINING CENTER
2
2/1/16 3:29 PM
AUCTION SALE DATE & TIME – TUESDAY, FEBRUARY 23RD @ 9:00 A.M. CST
2
AVAIL.
(2) DAEWOO DMV-500 DIAMOND SERIES CNC VERTICAL MACHINING CENTERS
4
AXIS
2
AVAIL.
MORI SEIKI MV45B/40 CNC VERTICAL MACHINING CENTER
(2) FADAL VMC 4020HT CNC VERTICAL MACHINING CENTERS
(8) CNC VERTICAL MACHINING CENTERS (continued)
(2) DAEWOO Model DMV-500 Diamond Series CNC Vertical Machining Centers with 20” x 47” Table, 32”
X-Axis, 18” Y-Axis, 20” Z-Axis Travels, 30 ATC, 40 Taper Spindle Speeds to 10,000 RPM, 20 HP, Chip
Conveyor, Coolant, Work Light, MITSUBISHI CNC Pendant Control, sn:AV5S0517, mfg.1999 ● sn:AV5S0528,
mfg.1999
(2) FADAL Model VMC 4020HT CNC Vertical Machining Centers with 20” x 48” Table, 40” X-Axis, 20”
Y-Axis, 20” Z-Axis Travels, Wired for 4th Axis, 21 ATC, 40 Taper Spindle Speeds to 10,000 RPM, 15 HP,
Coolant, FADAL 88HS CNC Control, sn:9109590 ● sn:9603150
FADAL Model VMC 15RT CNC Vertical Machining Center with 16” x 30” Table, 20” X-Axis, 14” Y-Axis, 24”
Z-Axis Travels, 21 ATC, 40 Taper Spindle Speeds to 7,500 RPM, Coolant, FADAL 88HS CNC Control,
sn:9709976
HAAS Model SHRT-450B 4-Axis Rotary Indexer with 18” 4-Jaw Chuck, 7” Thru-Hole (410BL), Tailstock &
Supports
HAAS Model HRT-310BL 4-Axis Rotary Indexer with 16” 3-Jaw Chuck, 3” Thru-Hole, Tailstock & Supports
TSUDAKOMA 4-Axis Rotary Indexer with 12” 3-Jaw Chuck, 2” Thru-Hole, Tailstock
HAAS Model 5C Programmable Indexer
YUASA 4-Axis Rotary Indexer with 12” 3-Jaw Chuck
(2) FADAL Model VH65 4-Axis Rotary Indexers with 8” 3-Jaw Chucks, 2” Thru-Holes
FADAL VMC 15RT CNC VERTICAL MACHINING CENTER
3
2/1/16 3:29 PM
2015
TOOL
PRESETTER
SPERONI Model STPMAGIS
600
Tool
Presetter with Monitor &
Software,
Cabinet,
Communicates
with
Programming Software,
40 & 50 Taper Tooling,
Like New Condition,
sn:0006720, mfg.2015
MACHINE
DESCRIPTIONS
CONTINUE
ON PAGE 6
SPERONI STP-MAGIS 600 TOOL
PRESETTER
2015
REFURB
2013
CTRL
2000
LODGE & SHIPLEY 40" X 168" 2-AXIS CNC TURNING CENTER
2
2008
REFURB
AVAIL.
(2) LODGE & SHIPLEY 15/40U 2-AXIS CNC TURNING CENTERS
LODGE & SHIPLEY 22" X 120" 2-AXIS CNC TURNING CENTER
4
2/1/16 3:29 PM
MILLING
C-AXIS
2010
MAZAK QUICK TURN NEXUS 350-II 2-AXIS CNC TURNING
CENTER
2008
(2) HAAS SL30B BIG BORE 3-AXIS CNC CHUCKERS WITH
MILLING & C-AXIS
2012
REFURB
MAZAK M5 POWER MASTER 2000 2-AXIS CNC TURNING CENTER
MAZAK SUPER QUICK TURN 28 2-AXIS CNC TURNING CENTER
2
AVAIL.
(2) HYUNDAI HiT15S 2-AXIS CNC TURNING CENTERS
MAZAK QUICK TURN 28N 2-AXIS CNC TURNING CENTER
Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.com For More Bidding Options. Check Out
Our Upcoming Auction Calendar! You Can Also Sign Up to Receive Email Notifications by Joining Our Mailing List!
5
2/1/16 3:30 PM
FEMCO WN-CL-35 2-AXIS CNC TURNING CENTER
(16) CNC TURNING CENTERS
LODGE & SHIPLEY Model PFT40 2-Axis CNC Turning Center with Dual 24”
4-Jaw Chucks, 40” Swing Over Bed x 168” Center Distance, 46” X-Axis, 170”
Z-Axis Travel, Tailstock, 12.5” Thru-Hole, 4 OD & 6 ID Power Turret Stations,
650 RPM, 60 HP, Chip Conveyor, CNC FANUC Retro-Fit Control by CNC
Engineering with Remote Pulse Generator, sn:49813, Installed Late 2012 /
2013
MIYANO BNC34A 2-AXIS CNC CHUCKER
5
AXIS
MAZAK Model Power Master N 2-Axis CNC Turning Center with Dual 28”
Z-Axis Travel, Tailstock, 10” Thru-Hole, 8 OD & 6 ID Power Turret Stations, 750
RPM, 60 HP, Steady Rest, Chip Conveyor, Coolant, MAZATROL PC Fusion
640T CNC Control, sn:148878, mfg.2000
MAZAK Model Power Master N 2-Axis CNC Turning Center with Dual 24”
Z-Axis Travels, Tailstock, 10” Thru-Hole, 8 OD & 4 ID Power Turret Stations,
400 RPM, 60 HP, Chip Conveyor, Coolant, MAZATROL T-Plus CNC Control,
Completely Refurbished by Mazak 2015, sn:133243
LODGE & SHIPLEY Model 2100 2-Axis CNC Turning Center with 22-1/4”
Swing Over Bed x 120” Center Distance with Power Tailstock, 20” 4-Jaw
Chuck & 20” 3-Jaw Chuck, 6” Thru-Hole, 2” – 6” Powered Omni Steady Rest,
12 Station Turret, Inch / Metric Threading, 1,500 RPM, 80 HP, Ball Screws,
Chip Conveyor, FANUC Series Oi-TC CNC Pendant Control with Dual Remote
Pulse Generator, 2008 Machine Retrofitted with FANUC CNC Control & Drives
& Refurbished 2008, sn:50911
(2) LODGE & SHIPLEY Model 15/40U 2-Axis CNC Turning Centers with 20”
Swing Over Bed x 80” Center Distance with Power Tailstock, 16” 3-Jaw Chuck
& 16” 3-Jaw Chuck, 4” Thru-Hole, 1” – 4” Omni Powered Steady Rest & 2” – 6”
Omni Powered Steady Rest, 12 Station V.D.I. Turret, Inch / Metric Threading,
2,500 RPM, 40 HP, Ball Screws, Chip Conveyor, GE FANUC Series Oi-TC
CNC Pendant Control with Remote Pulse Generator, 2009 Retrofitted with
FANUC Control & Drives, Machine Refurbished 2009, sn:50960 ● sn:50961
MAZAK Model M5 Power Master 2000 2-Axis CNC Turning Center with 24”
Swing Over Bed x 80” Center Distance, 15” 4-Jaw & 15” 3-Jaw Power Chucks,
13” X-Axis, 82” Z-Axis Travels, Power Tailstock, 4.05” Thru-Hole, 8 OD / 6 ID
Turret Stations, 2,500 RPM, 30 HP, Chip Conveyor, MAZATROL CNC Control,
Machine Completely Remanufactured & Refurbished in 2012 at Mazak,
sn:70124
(2) HAAS Model SL30B Big Bore 3-Axis CNC Chucker with C-Axis & Milling,
30” Swing, 12” X-Axis, 33” Z-Axis Travels, 16” 3-Jaw Chuck, 4.62” Thru-Hole,
12 Station Turret, 40 HP, 2,400 RPM, Automatic Door, HAAS CNC Control,
sn:3083598, mfg.2008 ● sn:3083610, mfg.2008
MAZAK Model Quick Turn Nexus 350-II 2-Axis CNC Turning Center with 28”
Swing Over Bed x 66” Center Distance, 12” 3-Jaw Chuck, Tailstock, 17-3/4”
X-Axis, 59-3/4” Z-Axis Travel, 4.5” Thru-Hole, 12 Station Turret, 4,000 RPM,
Steady Rest, High Pressure Coolant, Chip Conveyor, Tool Probe, sn:219560,
mfg.2010
FEMCO Model WN-CL-35 2-Axis CNC Turning Center with 33.4” Swing Over
Bed x 33.46” Center Distance, 15-3/4” 3-Jaw Chuck, 16.31” X-Axis, 29.13”
Z-Axis Travels, Tailstock, 4-9/16” Thru-Hole, 12 Station Turret, 4,500 RPM,
Chip Conveyor, FANUC Series OT CNC Control, sn:L77-5002
KURAKI KBM-11A 5-AXIS CNC HORIZONTAL BORING MILL
MAZAK Model Super Quick Turn 28 2-Axis CNC Turning Center with 20.08” Swing Over Bed x 40” Center
Distance, 10” 3-Jaw Chuck, 9.5” X-Axis, 40” Z-Axis Travels, Tailstock, 3.15” Thru-Hole, 12 Station Turret,
3,500 RPM, 30 HP, Tool Probe, Chip Conveyor, MAZATROL T32B CNC Control, sn:109009
MAZAK Model Quick Turn 28N 2-Axis CNC Turning Center with 20.08” Swing Over Bed x 40” Center
Distance, 10” 3-Jaw Chuck, 9.5” X-Axis, 40” Z-Axis Travels, Tailstock, 3.15” Thru-Hole, 12 Station Turret,
3,000 RPM, 26 HP, Tool Probe, Chip Conveyor, Coolant, MAZATROL T32B CNC Control, sn:111637
(2) HYUNDAI Model HiT15S 2-Axis CNC Turning Centers with 17.3” Swing Over Bed x 21-1/4” Center
Distance, 21-1/4” X-Axis, 8-5/8” Z-Axis Travel, Tailstock, 8” 3-Jaw Power Chuck, 2.44” Thru-Hole, 8 Station
Turret, 4,500 RPM, 15 HP, Tool Probe, Chip Conveyor, SIEMENS CNC Control, sn:6169M (parts machine)
● sn:5-033
MIYANO Model BNC34A 2-Axis CNC Chucker with 8” Swing Over Bed, 5” 3-Jaw Power Chuck & 5 ‘C’
Collet Chuck, 4” X-Axis, 4” Z-Axis Travels, 1-1/8” Thru Hole, 6 Station Turret, 5,000 RPM, 7-1/2 HP, Bar
Feeder, GE FANUC Series O-T CNC Control, sn:BN3158AU
CNC HORIZONTAL BORING MILL
KURAKI Model KMB-11A 5-Axis CNC Horizontal Boring Mill with 4.33” Spindle, 60” X-Axis, 48” Y-Axis, 28”
Z-Axis, 14” W-Axis Travels, B-.001°, CAT 50 Taper Spindle Speeds to 18-1500 RPM, 30 ATC, 43” x 38”
Rotary Table, Pendant Control, Work Light, Coolant, FANUC Series 16-M CNC Control, sn:1018, mfg.1995
6
2/1/16 3:30 PM
NEW
ELEC.
2008
SUNNEN HONE HTH-4000S CNC HORIZONTAL SINGLE AXIS HONING MACHINE
CNC & MANUAL HONING MACHINE
SUNNEN HONE Model HTH-4000S CNC Horizontal Single
Axis Honing Machine with 13’ Stroke, 35.1” Inside Diameter,
(2) Work Holding Devices, 10.5 HP, Coolant, SIEMENS
Simatic Panel Touch, CNC Control, sn:H00010, mfg.2008
SUNNEN HONE Model MBC-1801 Honing Machine with
Automatic Feed, Automatic Stroke, Work Light, sn:82876
SUNNEN HONE Model MBB-560DR Honing Machine with
Coolant, Work Light, sn:19790
KING 52" 4-JAW HIGH COLUMN VERTICAL
BORING MILL
Assorted SUNNEN HONE Tooling
VERTICAL BORING MILL
Offered by Private Liquidation
KING 52” 4-Jaw High Column Vertical Boring Mill with 52” 4-Jaw
Chuck, 66” Maximum Swing, 72” Height Under Rail, Ram, Turret &
Side Heads, Up-Fit Electrics in 2013, sn:20112 – Machine Located
in Houston
SUNNEN 500DB HONING
MACHINE
Download a lot book at
www.asset-sales.com
Want to Join Our Mailing List? Want to be Included in Email Blast announcing
Upcoming Future Auctions? Curious to Preview Machines and Tooling Featured in
an Upcoming Auction? Want to Request a Brochure or Update Your Address? Email
Us at [email protected] or Fax a Request to (704) 821-4325!
(2) HEAVY DUTY ENGINE / OIL
LATHES
BINNS & BERRY Model TRIDENT L850 Heavy Duty Long
Bed Oil Country Engine Lathe with Dual 26” 4-Jaw Chucks,
34” Swing Over Bed x 256” Center Distance, Tailstock, 101/4” Thru-Hole, Inch / Metric Threading, 1,000 RPM,
Variable Speeds, 30 HP, Power Feed, Rapid Traverse, Box
Ways, Chip Guard, Chip Conveyor, Coolant, sn:61378,
mfg.1979
MAZAK Heavy Duty Oil Country Engine Lathe with Dual
24” 4-Jaw Chucks, 34” Swing Over Bed x 100” Center
Distance, Tailstock, Tool Post, 12-1/2” Thru-Hole, Inch /
Metric Threading, 300 RPM, Power Feed, Rapid Traverse,
Chip Guard, Chip Conveyor, NEWAL 2-Axis DRO,
sn:49983W
MAZAK HEAVY DUTY OIL COUNTRY ENGINE LATHE
BINNS & BERRY TRIDENT L850 HEAVY DUTY LONG BED OIL
COUNTRY ENGINE LATHE
7
2/1/16 3:30 PM
11
LATHES
LION C10T ENGINE LATHE
KINGSTON HD-22120 ENGINE LATHE
SUMMIT 400 M 1500 ENGINE LATHE
KINGSTON HLC2180 ENGINE LATHE
(11) ENGINE LATHES
LION Model C10T Engine Lathe with 30” Swing Over
Bed x 120” Center Distance, 16” 3-Jaw Chuck, Tailstock,
Taper Attachment, Inch / Metric Threading, 1,500 RPM,
4-1/8” Thru-Hole, 2-Axis ACU-RITE DRO, 25 HP, Rapid
Traverse, Coolant, Chip Guard, Chip Conveyor, sn:1178
KINGSTON Model HD-22120 Engine Lathe with 22”
Swing Over Bed x 120” Center Distance, 16” 4-Jaw
Chuck, Tailstock, Taper Attachment, Inch / Metric
Threading, 1,200 RPM, 3-1/2” Thru-Hole, 2-Axis
NEWALL DRO, Chuck Guard, Rapid Traverse, Coolant,
Chip Guard, Chip Conveyor, sn:CH94-451, mfg.1994
KINGSTON Model HLC2180 Engine Lathe with 21”
Chuck, Tailstock, Inch / Metric Threading, 1,500 RPM,
3-1/2” Thru-Hole, 2-Axis NEWALL DRO, 25 HP, Rapid
Traverse, Coolant, Chip Guard, Chip Conveyor,
sn:040136
YUNNAN Model ML-1860GL Engine Lathe with 20”
Threading, 1,600 RPM, 3-1/4” Thru-Hole, Rapid
Traverse, Chuck Guard, sn:98060854
TURRET AMERICA Engine Lathe with 18” Swing Over
Taper Attachment, Inch / Metric Threading, 3-1/4” ThruHole, NEWALL 2-Axis DRO, Rapid Traverse, Coolant,
Chip Guard, Chuck Guard, Work Light, sn:18691030806
SUMMIT Model 400M 1500 Engine Lathe with 22”
Threading, 2,000 RPM, 3” Thru-Hole, 2-Axis ACU-RITE
DRO, Rapid Traverse, Coolant, Chip Guard, Chuck
Guard, Work Light, sn:31768
CLAUSING COLCHESTER Engine Lathe with 18”
Swing Over Bed x 48” Center Distance, 8” 3-Jaw Chuck,
Tailstock, Inch / Metric Threading, 2,000 RPM, 2-1/2”
Thru-Hole, 2-Axis ACU-RITE DRO, Rapid Traverse,
Coolant, Chip Guard, Chuck Guard, 5C Collet
Attachment, sn:GT0234
LION Model C400TM Engine Lathe with 18” Swing Over
Taper Attachment, Inch / Metric Threading, 2,400 RPM,
2-1/8” Thru-Hole, Sargon 2-Axis DRO, 10 HP, Rapid
Traverse, Coolant, Chip Guard, Chuck Guard, Work
Light, sn:218
CLAUSING COLCHESTER ENGINE LATHE
CLAUSING COLCHESTER Engine Lathe with 18”
Threading, 2,000 RPM, 2” Thru-Hole, Rapid Traverse,
Chip Guard, Chuck Guard, 5C Collet Attachment
HARRISON Model M300 Tool Room Lathe with 13”
Swing Over Bed x 38” Center Distance, 6” 3-Jaw Chuck
with 5‘C’ Collet Attachment, Tailstock, Taper Attachment,
Tool Post, Inch / Metric Threading, 2,500 RPM, 1-1/8”
Thru-Hole, MITUTOYO 2-Axis DRO, Rapid Traverse,
Chip Guard, sn:16892
HARDINGE Model HC Second Operation Lathe with 12”
Swing Over Bed x 11” Center Distance, 1-1/2” Spindle
Hole, 8 Station Turret, 3,000 RPM
LION C400TM ENGINE LATHE
8
2/1/16 3:30 PM
2013
REFURB
HENSCHEL WERKE DEEP HOLE / TREPANNING EJECTOR DRILLING MACHINE
(2) TREPANNING, DEEP HOLE & EJECTOR DRILLS
OIL RESERVOIR
HENSCHEL WERKE Deep Hole / Trepanning / Ejector Drilling Machine with up to 44’
Maximum Bed Length, 15’ Z-Axis Travel, Counter Rotation, 50 HP Spindle, Variable Spindle
Speeds 48 - 855 RPM & DRO, 2 Oil Pumps, Filters, (3) Heavy Duty Steady Rests 5” – 25”, (2)
10” – 30-1/2” with Conveyor, External Return Oil Pump, Refurbished 2013
Complete 3,500 Gallon Capacity Filter Oil Reservoir with 30 HP High Pressure Oil Pump, 50
HP Low Pressure High Flow Oil Pump, External Chiller, Currently Connecting Both Deep
Hole Trepanning Machines
TURRET LATHE
SIG / AXELSON CNC Deep Hole / Trepanning / Ejector Drilling Machine with up to 27’
Maximum Bed Length, 14’ Z-Axis Travel, 30 HP, Multiple Speed, (3) Pressure Heads Ranging
from 1” – 7” Drill Diameter, Conveyor, 6 - 750 RPM, FANUC OTi Single Axis CNC Control,
Retrofitted & Refurbished 2010
WARNER & SWASEY Model 3-A Lathe with 21” 4-Jaw Chuck, 6-1/8” Thru Hole, 15 HP,
Power Cross Slide, (2) Turrets 4 Station OD Power Feed X & Z, 6 Station ID Turret with Power
Feed on Z-Axis, Boring Head Attachment, Chip Guard, sn:E-31-818-8 / 553536
Huge assortment (over $500,000 acquisition cost) of Trepanning & Injector Drill Tooling
2010
CTRL
SIG / AXELSON CNC DEEP HOLE / TREPANNING / EJECTOR DRILLING MACHINE
9
2/1/16 3:30 PM
3
AVAIL.
LAGUN LAGUNMATIC 250 3-AXIS CNC VERTICAL
MILLING MACHINE
TREE JOURNEYMAN CNC VERTICAL
MILLING MACHINE
PARTNER MILL TRONIC 3-AXIS CNC
VERTICAL MILLING MACHINE
(5) CNC VERTICAL MILLING MACHINES
LAGUN Model Lagunmatic 250 3-Axis CNC Vertical Milling Machine with 11” x 58” Table, 32” X-Axis, 14” Y-Axis, 6” Z-Axis Travels, 40 Taper, 7.5 HP, 58 - 4,200 RPM, Power
Draw Bar, sn:28389
TREE Model Journeyman 425 CNC Vertical Milling Machine with 12” x 52” T-Slotted
Table, 30” X-Axis, 15” Y-Axis, 6” Z-Axis Travels, Wired for 4th Axis, 7-1/2 HP, 6,000 RPM,
Power Knee, DYNAPATH DELTA CNC Auto Con CNC Control, sn:9-42-96-6064
PARTNER Model Mill Tronic 3-Axis CNC Vertical Milling Machine with 10” x 50” T-Slotted Table, 50 - 3,750 RPM, 5 HP, Variable Speed, Power Drawbar, CENTURION 1 CNC
Control, Chip Pan, sn:3768
TREE Model Journeyman 325 3-Axis CNC Vertical Milling Machine with 10” x 42” TSlotted Table, 24” X-Axis, 12” Y-Axis, 6” Y-Axis Travels, Wired for 4th Axis, 5 HP, 6,000
RPM, Power Knee, DYNAPATH DELTA 10 CNC Control, sn:9-25-85-5595
TREE Model Journeyman 325 3-Axis CNC Vertical Milling Machine with 10” x 42” TSlotted Table, 24” X-Axis, 12” Y-Axis, 6” Z-Axis Travels, Work Light, Coolant, Handwheel,
5 HP, 6,500 RPM, Power Knee, DYNAPATH DELTA 10 CNC Control, sn:9-25-85-5495
(8) MANUAL VERTICAL MILLING MACHINES
LAGUN Model FU2-LAC Universal Milling Machine with 12” x 55” T-Slotted Table, 4 HP,
Vertical Spindle Speeds to 4,200 RPM, Coolant, Rapid Traverse, Power Knee, Horizontal
Spindle Speeds to 1,400 RPM, Arbor Supports, sn:212771894
ASSORTED MILLING MACHINES
(2) BRIDGEPORT Vertical Milling Machines with 9” x 48” T-Slotted Tables, 2 HP, 60 4,200 RPM, Servo Table Feed, Rapid Traverse, Variable Speed, Collet Set, ACU-RITE
II 2-Axis DRO, sn:258209 ● sn:255198
FREJOTH Vertical Milling Machine with 9” x 42” T-Slotted Table, 3 HP, 60 - 4,200 RPM,
Table Servo Feed, Rapid Traverse, Variable Speed, Collet Set, STERLING 2-Axis DRO,
Absolute Digimatic Z-Axis, sn:971590
LAGUN Model FTV-25 Vertical Milling Machine with 10” x 50” T-Slotted Table, 2 HP, 60
- 4,200 RPM, Variable Speed, sn:23013
VAN NORMAN Model 1R-3-22 Universal Milling Machine with 9” x 36” T-Slotted Table,
55 - 2,000 RPM, Coolant, Power Feed, sn:6428
LAGUN Model Republic VEC FTV-25 Vertical Milling Machine with 10” x 50” T-Slotted
Table, 2 HP, 60 - 4,200 RPM, Variable Speed, ACU-RITE III DRO, Power Feed,
sn:SE23011
BIRMINGHAM Vertical Milling Machine with 9” x 42” T-Slotted Table, 3 HP, 70 - 4,200
RPM, Variable Speeds, Servo Table Power Feed, Coolant Mist System, ACU-RITE
2-Axis DRO, sn:1175
Want to Sell Your Shop or Know Someone Who Does?
Call Us Toll Free at (888) 800-4442!
We Pay Great Finder’s Fees!
ASSORTED MILLING MACHINES
10
2/1/16 3:30 PM
3
AVAIL.
MITSUBISHI DWC-110SZ 5-AXIS CNC WIRE EDM
(3) MITSUBISHI FX20K 5-AXIS CNC WIRE EDM MACHINES
2002
CHARMILLES ROBOFORM 40 3-AXIS PLUNGE CNC WIRE EDM
CHARMILLES ROBOFORM 44 4-AXIS PLUNGE CNC WIRE EDM
GRINDERS
CINCINNATI Model #2 Tool & Cutter Grinder with 5” W x 56” L Table Capacity,
sn:1D2T1R-158
TAFT-PIERCE Reciprocating Surface Grinder with 6” x 13” Capacity, Magnetic Chuck, Work
Light, sn:182559
K.O. LEE Model B2060 Tool & Cutter Grinder with 5-1/4” x 37” Working Surface, sn:22784PJ
CINCINNATI Model #2 Tool & Cutter Grinder with 5” x 36” Work Surface
Large Drill Sharpener ● Assorted Tooling for Tool & Cutter Grinders
DAREX Model E-90B End Mill Sharpener with 1/16” – 1” Cutting Tool Diameter Shank
Capacity, 2” Flute Diameter, Work Light, sn:95472F, mfg.2002
DAREX Model XT-3000 Drill Sharpener & Grinder with Auto Sharp Gage, LCD Screen, Like
New Condition, sn:14008551, mfg.2014
(7) CNC WIRE, RAM TYPE & MANUAL EDM MACHINES
(2) MITSUBISHI Model FX20K 5-Axis CNC Wire EDMS with 19” X-Travel, 13” Y-Axis, 12”
Z-Axis Travels, 30° Maximum Capacity in U & V Axis, Work Tank Holding Capacity 33” x 41”
x 14”, Added Specially with a Side Attachment for Bar Stock 41” L x 3-1/2” W, sn:08K20026,
mfg.1998 ● sn:08K20095, mfg.1998
MITSUBISHI Model FX20K 5-Axis CNC Wire EDM with 19” X-Travel, 13” Y-Axis, 12” Z-Axis
Travels, 30° Maximum Capacity in U & V Axis, Work Tank Holding Capacity 33” x 41” x 14”,
sn:09K20440, mfg.1999
MITSUBISHI Model DWC-110SZ 5-Axis CNC Wire EDM with 17” X-Axis, 12” Y-Axis, 10-1/2”
Z-Axis Travels, 30° Maximum Capacity in U & V Axis, Work Tank Holding Capacity 25-1/2” x
34” x 12”, Pendant Box, sn:531SZ624
CHARMILLES Model ROBOFORM 40 3-Axis Plunge CNC Wire EDM with 26” X-Axis, 26”
Y-Axis, 17-1/2” Z-Axis Travels, Work Tank Holding Capacity 47” X-Axis, 34” Y-Axis Travels,
19” Depth, 9-1/2” x 145” x 9” Special Side Attachment for Work Tank Holding, CHARMILLES
CNC & Remote Pendant Control, sn:600119
CHARMILLES Model ROBOFORM 44 4-Axis Plunge CNC Wire EDM with 19” X-Axis, 14”
Y-Axis, 20” Z-Axis Travels, C-Rotary Spindle Indexing 360°, Work Tank Holding Capacity
28” x 42” x 16” Depth, Special Side Attachment for Work Tank Holding 12” x 40” x 16-1/2”
Depth, (6) Automatic Tool Changer Option, CHARMILLES CNC & Remote Pendant Control,
sn:648001, mfg.2002
GENSPARK AMERICA Model 50PZ Manual Plunge EDM with 12” X-Axis, 8” Y-Axis, 16”
Z-Axis Travels, System 3R Head, Work Light, 19” x 31-1/2” x 12” Work Tank Holding Capacity,
GENSPARK AMERICA Control, sn:802212, mfg.1998
11
2/1/16 3:31 PM
NEW!
(2) GUN DRILLS
ELDORADO Model KM75-48 Single Spindle Multi Axis
CNC Knee Type Gun Drilling Machine with .078” - .750 Diameter Drill Capacity, 48” Stroke, High Pressure Coolant,
45.5” Drill Depth, 24” X-Axis Knee Travel, 48” Z-Axis, 12”
Y-Axis Travels, 30” x 40” Table Work Area, Total Enclosed
with Guarding, Coolant System, Programmable Variable
Spindle Speeds, Programmable Feed Rate, Ball Screw
Feed Driven by A.C. Brushless Servo, New Never Used,
Complete Warranty, Delivered New 2015, New Cost
$285,000
POPE Gun Drill with .093 - .750 Drill Size x 60” Travel, 24” x
24” Table, Acu-Rite 2-Axis DRO, Variable Speed Control to
Approx. 5,000 RPM, Oil Reservoir, High Pressure Pumps,
Filters, Chiller, sn:LA806
SEBASTIAN Dual Spindle Lathe / Gun Drill with 22” Swing,
2” Bore, 6’ Bed, 3-Jaw Chuck, 1” Shank Gun Drill, Thru
Coolant Head, Auto Feed, sn:C6268R
C&J Lathe / Gun Drill Model GH with 22” Swing, 2” Bore, 6’
Bed, 3-Jaw Chuck, 1” Shank Gun Drill, Thru Coolant Head,
Auto Feed, Steady Rest, sn:TC36381
2015
ELDORADO KM75-48 SINGLE SPINDLE MULTI AXIS CNC KNEE TYPE GUN DRILLING
MACHINE
HEM H90A-1 HORIZONTAL AUTOMATIC BANDSAW
Download a lot book at
www.asset-sales.com
500 TON FRENCH OIL MILL SHAFT STRAIGHTENING PRESS
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers
May Pick Up Their Items at the Auction Location or Can Arrange for a Third
Party Logistics Firm to Manage the Removal Process for Them.
SHAFT
STRAIGHTENING
PRESS
500 Ton French Oil Mill Shaft
Straightening Press with 28’ Bed,
Headstock & Tailstock, (2) Traveling
Rests, 24” Stroke, sn:128421
MISCELLANEOUS
MACHINES
ELECTRO ARC Tap Burner with
Adjustable Head, 40” Height, 24” x 34”
T-Slotted Table, 26” Ram, 8” Quill
Sand Blast Cabinet with 24” x 36” x 21”
Capacity, 2 Hole, Observation
Window, Work Light
NATIONAL L148-12 SHEET METAL
FINGER BRAKE
NATIONAL NH5210 SHEET METAL
SHEAR
KRW Model 37E Hydraulic Shop
Press with 50 Ton Capacity, Tonnage
Gage, 30” Between Uprights, sn:A5101
NATIONAL Model L148-12 Sheet
Metal Finger Brake with 48” x 12 GA,
sn:55-3-89
NATIONAL Model NH5210 Sheet
Metal Shear with 52” x 10 GA, Foot
Treadle, sn:863-4-89
SWECO 32” Diameter
Vibratory Finisher with Liner
Media
LINDBERG / BLUE M Model OV490A-3
Electric
Oven
with
Temperature Range 38° Celsius to
260° C, Digital Readout, sn:OV-7098
SPIRO-THERM Model HTE1212
Oven
with
2200º
Maximum
Temperature & Honeywell Digital
Readout, sn:1037
12
2/1/16 3:31 PM
2
2010
GAGEMAKER MIC TRAC MT-3000 MEASUREMENT
CENTER
AVAIL.
TESA-HITE ELECTRONIC
HEIGHT GAGE
(2) EATON ROTARY SCREW AIR COMPRESSORS
(4) SAWS
AIR COMPRESSORS
HEM Model H90A-1 Horizontal Automatic
Bandsaw with 16” x 12” Capacity, Auto
Feed up to 24” Length, 16’ Feed Table, 1”
Blade & Auto Clamping, Parts Counter,
sn:867504
(2) EATON Model EC-SRW3-30HP-DV
Rotary Screw Type Air Compressors with
120-145 Working Pressure, 123 SCFM
Capacity,
sn:EC-SRW-080720R
●
sn:EC-SRW-060912R
DOALL Model 2013U Vertical Bandsaw
with 24” x 24” Tilting Table, Welding
Attachment, 1/2” Blade Size, Speed
Indicator 55-5200 RPM, sn:411-81139
CAMPBELL HAUSFELD 10 HP
Reciprocating
Air
Compressor,
sn:060596L-775127
ROLL-IN Vertical Bandsaw with 8”
Capacity, 3/4” Blade Size, 18” x 31” Table
Capacity
KALAMAZOO Horizontal Bandsaw with
8” L x 18” W Clamping Capacity, Coolant,
3/4” Blade Size, sn:5688-0
TENSILE TESTER
LOUIS Model UT10TA7 10,000lb Small
Universal Tensile Tester, sn:10017
NUMEREX C100N2828-18.MI COORDINATE
MEASURING MACHINE
INSPECTION
DEPARTMENT
DOALL 8” x 48” x 60” Black Granite
Surface Plate with Portable Stand, Grade
A, sn:10210
Numerous Other Inspection Plates
GAGEMAKER Model Mic Trac MT-3000
Measurement Center with Mic Trac DRO
& Gagemaker Software, Like New
Condition, sn:TF-1F.PL, mfg. 2010
NUMEREX Model C100N2828-18.MI
Coordinate Measuring Machine with 40” x
40” Work Surface, Renishaw PH-1 Probe,
Updated with QC5000 Software,
sn:CMM920301482
TESA-HITE Type 00790042 Electronic
Height Gage, sn:6M-110-01
(3) 6-Drawer Heavy Duty Tool Cabinets ●
(5) 8-Drawer Heavy Duty Tool Cabinets
Miscellaneous Inspection Including
STARRETT, MITUTOYO, BROWN &
SHARPE, TESA Height Gages,
Micrometers, Calipers, Pin & Gauge Block
Sets, Depth Micrometers, Plug & Ring
Gages, Etc.…
Vertical Air Tank, Approx. 500 Gallon
Capacity ● INGERSOLL RAND Model
Thermostar Air Dryer
PORTABLE BUILDINGS
(2) 8’ x 12’ Portable Buildings with
Contents
FORKLIFTS, MATERIAL
HANDLING & CRANES
9,625lb CLARK Model C5004S80 Type D
Diesel Forklift with Side Shift, Protection
Cage, All Terrain Tires, 2-Stage Mast,
Extra
Long
Forks,
Lights,
sn:Y6850063660X0F
5,000lb WALDON Model 5000 Diesel
Forklift with Protection Cage, All Terrain
Tires, 2-Stage Mast, sn:15889
3,225lb CLARK Model TM20 Type E
Electric Forklift with Side Shift, Protection
Cage, 3 Solid Tires, Lights, Charger,
2-Stage Mast, sn:TM247-419-7867
3,000lb CROWN Model 35SCTT Electric
Forklift with Side Shift, Protection Cage, 3
Solid Tires, Mirrors, Lights, Charger,
2-Stage Mast, sn:1A131280
3,000lb CATERPILLAR Model F35
Electric Forklift with Side Shift, Protection
Cage, 3 Solid Tires, Charger, 2-Stage
Mast, sn:5EB01325
CHUCK WAGON Model 340CC / 11HP
Utility Vehicle with Honda Motor, 2 Seats,
Dump Bed, All Terrain Tires
ROL-LIFT 2000 Capacity Walk Behind
Lift, sn:6339
(7) 1/2 Ton Jib Cranes ● (6) 1 Ton Jib
Cranes ● (6) 1/4 Ton Jib Cranes
9,625LB CLARK DIESEL FORKLIFT
13
2/1/16 3:31 PM
VEHICLES
GMC Model TOPKICK LOPRO
2-1/2 Ton Flat Bed Truck with 141/2’ Steel Deck, CATERPILLER
Diesel Engine, 5 Speed Manual,
VIN#1GDE6H1J0SJ500839,
mfg.1995
CHEVROLET Silverado 8’ Flat
Bed Truck with Removable Side &
Headache Racks, Automatic,
Side Left / Right Tool Box, Trailer
Receiver
Hitch,
Gas,
VIN#1GCNCPEXOCZ256294,
mfg.2012
5,000LB WALDON DIESEL FORKLIFT
CHUCK WAGON 11HP UTILITY VEHICLE
CHEVROLET Impala LT with Flex
Fuel AC / Heat, Power Locks,
Power Windows, Tilt Wheel,
Cruise Control, Power Mirrors,
Cloth Interior, 6 Cylinder, AM / FM
Stereo
with
CD
Player,
VIN#ZG1WT5AK079406762,
mfg.2007
BUICK Century with Power
Locks, Power Windows, Tilt
Wheel, Cruise Control, Power
Mirrors, Cloth Interior, 6 Cylinder,
AM / FM Stereo with CD Player,
VIN#2G4WS52J531171774,
mfg.2003
Download a
lot book at
www.asset-sales.com
(6) 1 TON JIB CRANES
(6) 1/4 TON JIB CRANES
(8) 1/2 TON JIB CRANES
2012
CHEVROLET SILVERADO 8' FLAT BED TRUCK
GMC TOPKICK LOPRO 2-1/2 TON FLAT BED TRUCK
14
2/1/16 3:31 PM
2005
HARLEY DAVIDSON ULTRA CLASSIC
ELECTRA GLIDE
FORD MODEL T RUNABOUT
FORD THUNDERBIRD
ATTENDING THE AUCTION IN PERSON?
What you need to bring.....
• Your Driver’s License
• Business Card
• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if
Paying via Company Check
CLASSIC VEHICLES
MISCELLANEOUS
HARLEY DAVIDSON Ultra Classic Electra Glide with CB & Intercom, Belt Drive, 5 Speed
Transmission, 1450 CC Twin Cam 88, Electronic Cruise Control, Air Adjustable Suspension,
Stock and Custom Low Cut Saddles, Bike Cover, Passenger Sound System & Intercom
Controls, Custom Fit Soft Luggage Liners, 1005 Original Miles, Glacier White Pearl Color,
Garage Kept & Covered, VIN#1HD1FCW155Y619169, mfg.2005
LINCOLN Electric Precision Tig 375 Welding Power Source, sn:6M11001 ● MILLERMATIC
252 Welding Power Source, sn:LJ260301B
FORD Model T Runabout with 177 CI 4 Cylinder Side Valve Engine, Rear Wheel Planetary
Gear Drive, 2 Forward Speeds & 1 Reverse, 6 Volt Electric Start & Hand Crank Start,
Electric Lights, Original Wooden Artillery Wheels, Black Exterior & Interior, mfg.1921
FORD Thunderbird 2 Seater with 292 Y Block V8, 3 Speed Manual, Tachometer, Original 6
Volt Electrical System, Adjustable Telescoping Steering Wheel, Engine Dress Kit Including:
Chrome Air Cleaner Cover, Oil Tube, Oil Cap & Finned Aluminum Valve Covers, 4 Way
Power Seat, Heater, Radio, Fender Skirts, Back Up Lights, Removable Fiberglass Top
without Portholes, Rally America Wire Wheels with Radial Tires with Correct Style
Whitewalls, will also Include Stock Wheels & Covers, Original Type Bias Tires, Black
Exterior, Black Interior with White Inserts, Car Cover, Repainted in 2008, Garage Kept and
Covered, Odometer Shows 52,800, VIN#P5FH120568, mfg.1955
Huge Assortment of Hand Tools ● Power Tools ● Carbide Inserts ● Lathe Tooling ● Live
Tool Holders ● 40 & 50 Taper Tool Holders ● EDM Tooling ● Black Granite Layout Tables ●
Tool Posts ● Lathe Chucks ● Calipers ● Tool Holder Carts ● Metal Carts ● Angle Plates ●
Tombstones ● Welding Equipment ● Oak Tool Box ● 4th Axis Indexers ● Barrels ● 5 ‘C’ &
R8 Collets ● Reamers ● End Mills ● Carbide End Mills ● Drill Bits ● Sockets ● Drill Presses
● Pressure Washer ● Clamping Kits ● Taps ● Saw Blades ● Parts Washers ● Large Steady
Rests ● Boring Bars ● Rotary Tables ● Grinding Wheels ● Tumblers ● Live Center with
Indexing Heads ● Fans ● Pumps ● Chillers ● Air Compressors & Dryers ● Shelving ● Dual
Pedestal Floor Type Grinders ● Ladders ● Scrap Metal ● Flammable Cabinets ● Fire
Extinguishers ● Degreasers ● Arbor Presses ● Cleaning Supplies ● Bore Gages ● Drills ●
Banding Carts ● Hand Trucks ● Pallet Jacks ● Pallet Racking ● Shelving ● All Perishable
Tooling ● Fences ● Steel Racks ● Dividing Heads ● Universal Heads ● Grinding Tooling ●
Dry Rod Ovens ● KURT Vises ● Metal Tables ● (4) 8’ x 40’ Storage Containers ● 600
Gallon Portable Oil Tank with Hitch ● Plus More!!
15
2/1/16 3:32 PM
A s s et s i n
Asset Sales, Inc.
to
ar s
Tur
n
oll
in
ur
Yo
D
g
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com
ASSOCIATION OF
MACHINERY AND
EQUIPMENT APPRAISERS
Presorted
First Class Mail
U.S. Postage
PAID
Kokomo, IN
Permit No. 154
Asset Sales Inc. • Lance Mannion – Texas License #13968
REAL ESTATE TO BE SOLD AT NOON
•
•
•
•
•
•
45,000 SQ FT: 1200 SQ FT MAIN OFFICE * 225 SQ FT
SHOP OFFICE * 196 SQ FT PROGRAMMING OFFICE
WELL WATER
240 & 480 POWER
AIR LINE THRU OUT BUILDING
(4) BAY DOORS - (2) 12 X 12 & (2) 12 X 14 - NO DOCKS
HEAT / AC
CONTACT ASSET SALES FOR MORE INFORMATION
DIRECTIONS
ABBREVIATED TERMS & CONDITIONS OF AUCTION
YOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY
BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT
YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE
BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer
at the time of the auction, any person participating in the auction shall
be bound by the following terms and conditions. The auctioneer does
not warrant the accuracy, authenticity, description, weight, count
or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process
in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE
COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall
be removed unless paid in full and all articles purchased shall be removed in the time allocated by the auctioneer. No item, no matter how
small or how far the purchaser has to travel, may be removed until the
close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/
or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All
bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer
and must be completed by the posted date. Rigging/Removal may not begin
until payment has been made in full and the auction sale is complete. All
heavy rigging will require a certificate of insurance for $1,000,000.00
naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,”
“WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all
onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset
Sales, Inc. will verify telephone number and confirm agreement to the
Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL
BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF
$5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
UPCOMING AUCTIONS
Tuesday, February 16th - Schult Engineering
Mazak, CNC Lathes, Vertical & Horizontal Machining
Centers, CNC Vertical Boring Mills & Tooling
Onsite / Online
Princeton, IA
Tuesday, March 1st - Steel Fabrication, E-Coat
Painting, Press Brakes & Laser Facility
Onsite / Online
Florence, SC
Direction From Fort Hood / Killeen:
Left onto FM2657, Go approx. 8.5 miles. Make a
sharp right onto FM963, Go approx. 8 miles,
crossover Hwy183. Plant will be 1/4 mile up on right.
Follow auctions signs.
HOTELS
HOLIDAY INN EXPRESS KILLEEN - FORT HOOD
2603 Gateway Dr. - Killeen, TX 76542
(254) 526-2022
HAMPTON INN KILLEEN
2702 OW Curry Dr. - Killeen, TX 76542
(254) 554-7110
PUBLIC AUCTION
PLANT CLOSED
BURNET MACHINE WORKS, INC.
Late Model CNC Machine Shop, Manual Machines &
Trepanning Equipment
LAMPASAS, TX
TUESDAY, FEBRUARY 23RD @ 9:00 A.M. CST
2/1/16 3:32 PM

Burnet Machine Works

Transcription

Similar documents

CNC MACHINING CENTER FOR TRIMMING MOLD CUTTING

Company Brochure - Sigler Machine Company

CNC Router: (ShopBot PRSalpha) specify movements in 3 axes (X

Paul Schurman Machine, Inc.

CIMCO DNC-Max Brochure

Thermwood

Products and Services

STYLE control system

Tekcel P2 - Prytec Solutions