C-PEX - Canxus

Transcription

C-PEX - Canxus

WE’VE GOT THE TOOLS & SUPPLIES
YOU’RE LOOKING FOR!
Check out the wide range
of machine shop tools and
supplies at exceptional
value found in this
catalogue (see right column ).
We also carry a wide range of other
product lines of great quality tools
and supplies:
®
•
Complete Line of Rebuilders’
Equipment, Tools, & Supplies.
Cleaning/Coating Supplies……....1
Lubricants/ Coolants………….…...2
Diamond Dressing Tools…….…….3
Valve Guide Tools & Supplies...4-16
Valve Seat Tools & Supplies…..17-19
Guide & Seat Tooling……….….20-23
Valve & Spring Tools & Supplies.24-29
•
™
Crack Detection Tools & Supplies...30
Tooling For Valves & Seats.
Crack Repair Tools & Supplies….31-32
Surfacing Tools & Supplies…..33-36
•
Cylinder Tools & Supplies…...37-41
Flex-Hones & Industrial Brushes
Piston Pin & Rod Tooling…….42-44
•
Cam Bearing Tools & Supplies....45
Crankshaft Tools & Supplies...46-51
Cam Bearings, Shims, & Seats
Brake Work Tools & Supplies..52-53
Contact us for more information or to
receive your free catalogues today.
Cylinder Head Tools & Supplies.54-55
1-877-574-4444
Miscellaneous Tools & Supplies.56-58
1
WHERE TO FIND IT • WHERE TO FIND IT
QUICK REFERENCE
Tools & Supplies by Section
ATTENTION ENGINE REBUILDERS:
INDEX
INDEX
A
Abrasive Pads……………………….
Air Hammer………………………….
Air Regulator Valve………………….
Alumi-Blast…………………………..
D
33
10
10
54
B
E
Ball Broach Driver………………….
13
Ball Broach………………………….
13
Ball Pusher…………………………..
12
Ball Sizers…………………………...
12
Boring Bar Cutters…………………. 40,41
Boring Bar Tool Holders…………...
41
Brake Lathe Cutter Tips…………….
53
Brake Rotor Flex-Hone……………..
53
Bristle Discs………………………...
33
Bronze Valve Guide Sleeves…….. 4,5,6
Engine Bags……………………...
Engine Paint………………………
Engine Pre-Luber………………..
Expanding Valve Guide Pilots…
INDEX
INDEX
C
INDEX
Desmond Dressers………………
Diamond Dress Tools……………
Diamond Laps……………………
Dry Graphite Lube………………
C.B.N. Flywheel Grind. Wheels…..
52
Cam Bearing Tool…………………..
45
Carbide ball Broach………………..
13
Carbide Ball Pusher………………..
12
Carbide Ball Sizers………………….
12
Carbide Boring Tool………………..
11
Carbon Removal Brush…………….
57
Cast Blast…………………………...
54
CBN Inserts………………………….
35
Chamfering Cones………………….
37
Chamfering Mandrels……………….
37
Clover Compound…………………..
24
Coating Chemicals………………….
1
Conn Rod Honing Mandrels………. 43,44
Coolants……………………………...
2
Crack Detection Kits………………..
30
CRACK REPAIR
Seal-Lock Jig……………………..
31
Seal-Locks………………………..
31
Taper Plugs………………………
31
Taps……………………………….
31
Crankshaft Bags…………………….
55
Crankshaft Grinding Wheels………. 48-50
Crankshaft Polisher………………….
46
Crankshaft Polishing Belts…………. 46,47
Cylinder Head Bags………………...
55
Cylinder Hone Stones……………...
38
Cylinder Honing Mandrel…………..
39
Cylinder Wash Brushes……………..
37
2
35,52
3
41
2
55
54
54
17
F
FLEX-HONE
Brake Rotor…………………..
Cylinder Bore…………………
53
37
Valve Guide…………………
Fluid Weld………………………
Flywheel Grind. Stone Dressers
Flywheel Grinding Wheels………
16
32
52
52
G
Glass Bead Gloves………………
Gloves, Glass Bead……………
Gloves, Hot Tank………………
GRINDING WHEELS
Brake Drum………………….
Head Surfacing………………
Crankshaft…………………..
Flywheel……………………..
Rod & Cap……………………
Valve Face……………………
Valve Seat……………………
Grip Retainer……………………
56
56
57
53
34
48-50
52
51
28
18,19
32
H
Hand Brushes……………………
33
Head & Block Sealer…………...
Head Bags………………………
Head Surfacing Belts……………
Heat Tabs…………………………
Heavy Metal………………………
High Frequency Cleaner………
Hone Stones, Cylinder…………
Hone Stones, Rod………………
Hone, Valve Guide………………
32
55
36
55
51
1
38
42,43
16
Honing Filters…………………..
2
K
"Kwik-Chek" Crack Detection……….
30
L
Lapping Compound…………………
Lapping Stick…………………………
Letter Metal Stamps…………………
Level, Starret…………………………
24
24
54
23
Lexhone oil……………………………
2
M
Magnetic Powder Blower…………….
Magnetic Powder…………………
METAL CLEANING
Caustic Powder…………………
Detergents…………………………
Protection Gloves…………………
Solvents……………………………
Metal Stamps…………………………
30
30
1
1
1
1
54
N
Number Metal Stamps……………
54
O
O-Ring Wire…………………………
56
P
Paint, Engine………………………
PCDS Inserts…………………………
Pilot, Expanding Valve Guide……
Pilot, Trimming Tool…………………
Piston Pin Extractor Kit………………
Plateau Brushes………………………
Polycrystalline Inserts………………
Portable Polisher Belts………………
Power Spray Washer Cleaners……
54
35
17
9
42
39
35
36
1
R
Ream Jig, Hand Held…………………
Reamer Bushing………………………
10
11
S
Scotch-Brite Multi-Flex Sheets………
33
Scotch-Brite Polishing Belts…………
Seal-All…………………………………
46
32
Sealers………………………………...
32
Seal-Lock Crack Repair………………
31
SEAT ANGLE CUTTING:
Ball Head…………………………... 20,23
Ball Socket Assembly……………..
20
Carbide Angle Cutter Ins………… 20-22
Morse Taper Adapters……………
20
Seat Ring Cutter Adapter…………
23
Spring Bushing…………………….
20
Tool Holder…………………………
20
Seat Collars……………………………
14
Segments, Surfacing…………………
Small Hole Gauge Set………………..
Spark Plug Thread Inserts…………..
Speed Reducer………………………..
Spray Paint, Engine…………………..
Starret Level…………………………...
Surface Conditioning Discs………….
Surface Grinder Dressers……………
Surface Grinding Segments………….
Surface Grinding Wheels…………….
Surfacing Belts………………………..
34
15
58
15
54
23
33
35
34
34
36
T
Taper Plugs……………………………
31
Thread Repair Inserts………………... 57,58
Three Angle Cutters………………….. 20-22
Tona Clean 17………………………...
1
Trizact Belts……………………………
47
Tru Kote 202…………………………..
1
Truclean 18 PDF……………………..
Trukut 122……………………………..
Truspray Detergent…………………..
T-Wrench………………………………
3
INDEX
35
INDEX
Inserts, Carbide & PCDS………
INDEX
I
Reamers, Valve Guide Boring……….
11
Reaming Fixture……………………….
14
Rod & Cap Grinding Wheels………...
51
Rod Hone Stones…………………….. 42,43
Roloc Bristle Discs…………………….
33
Roloc Surface Condition Discs……..
33
Rust Inhibitors…………………………
1
INDEX
2
16
1
1
2
1
2
1
10
INDEX
Honing Oil…………………………
Honing Stone, Valve Guide……
Hot Tank Cleaners………………
Hot Tank Gloves…………………
HPC 653 Coolant………………
INDEX
INDEX
INDEX
INDEX
INDEX
U
Ultra-Flex Brush………………………
Ultrasonic Cleaner……………………
Ultrasonic Filters………………………
Universal Driver Attachment…………
Utility Rolls…………………………….
39
1
1
10
33
V
Vacuum Tester………………………..
56
Valve Grinding Oil…………………….
2
VALVE GUIDE
Boring Reamer…………………….
11
Brushes…………………………….
16
Chamfer Tool………………………
10
Deburing Tool……………………..
10
Driver, Air…………………………..
15
Driver, Hand……………………...
15
Flex-Hones………………………..
16
Hone Kit…………………………...
16
Sleeve Install. Kits………………...
7,8
Sleeve Installer…………………….
10
Sleeve Removal Tool……………..
9
Sleeve Trim Tool Pilots…………..
9
Sleeve Trimming Tool…………….
9
Sleeves…………………………….. 4,5,6
Valve Keeper Installer………………...
25
Valve Refacing Wheels……………... 28,29
VALVE SEAT
Angle Cutter Kit……………………
20
Collers (Bushings)………………...
14
Cutters……………………………..
17
Grinding Wheels………………….. 18,19
VALVE SPRING
Booster Shims……………………..
27
Compressor Adapter……………..
25
Compressor……………………….
25
Tester……………………………….
26
Calabrated Spring………………...
26
Valve Stem Seal Extractor…………...
26
Van Norman Boring parts…………….
41
Vial, for Starret Level………………...
23
W
WIRE BRUSHES
Carbon Removal…………………..
Hand Brush………………………...
Valve Guide Brush………………..
57
33
16
4
CONTACT INFORMATION
Toll Free:
877-574-4444
FAX:
519-364-6051
Website:
www.ccvalves.com
E-mail:
[email protected]
TONA CLEAN 17
Liquid solvent for cleaning aluminum, cast
iron, and steel.
Save money: You need only 3 parts Tona
Clean to 100 parts water. Your Hot Tank
or Power Spray only needs to be heated to
115°F (55°C)
4 Litres
20 Litres
205 Litres
TONACLEAN17-4
TONACLEAN17-20
TONACLEAN17-205
Coating & Protecting Chemicals
TRUSPRAY “NON-FOAM”
TRU KOTE 202
Powder Detergent for use in power spray
washers and hot tanks. Cleans aluminum
and cast iron. Mix 75-300g: 20 Litres water
Prevents cast-steel rusting or aluminum discoloration
when shipping or stocking machined parts. It provides
up to 18 months surface protection.
4 Litres
20.9 Kg Pail (46 lbs)
65 Kg Pail (143 lbs)
TRU KOTE 202
TRUSPRAY-20
TRUSPRAY-65
TRUSPRAY-181
RUSTLEX N.R.
TRUCLEAN 18 PDF
Use 1% Solution. Yes, just 1% of RUSTLEX N.R.
added to your power spray washer’s rinse water will
clean off honing oil and coolants while prevent rusting
of parts and prevent discoloration of aluminum.
4 Litres
RUSTLEX NR-4
20 Litres
RUSTLEX NR-20
Caustic ferrous hot tank powder for use in
hot tanks. Cleans steel and cast iron only.
Mix 2.2kg: 44 litres water
20.9 Kg Pail (46 lbs)
HIGH FREQUENCY
CONCENTRATE ULTRA SONIC CLEANER
ULTRA SONIC CLEANER FILTERS
For industrial cleaning, removal of grease and oil.
Light /med. cleaning: 3-5 parts cleaner to 100 parts water.
Heavy cleaning: 8 parts concentrate to 100 parts water.
4 Litres
20 Litres
For power spray washers and hot tanks. Double-Dip solvent resistant P.V.C. gloves with a heat resistant jersey
liner. Protect your hands from chemical reactions and
chemical heat burns. Offers greater chemical resistance,
superior gripping quality, and better cut resistance.
14” (wrist) Model
Buy a dozen - SAVE 15%
GL-1418T
PART No:
30 MICRON
CARBON FILTER
6700-330
6740-523
(10% discount on 6 or more)
HF-4
HF-20
Protection Gloves
GL-1414T
TRUCLEAN18PDF
TRUCLEAN18PDF-65
TRUCLEAN18PDF-181
18” (elbow) Model
Buy a dozen - SAVE 15%
1
CLEANING/ COATING SUPPLIES
Cleaning Chemicals
LUBRICANTS/COOLANTS
Honing Oil
Lexhone Supreme
Lexhone’s best honing oil. Formulated to Industrial Production Standards. Hone faster with less
friction, heat, and stone wear.
20 Litres
205 Litres
LEXHONE SP-20
LEXHONE SP-205
Lexhone 50E
Our most popular honing oil. This heavy duty
honing oil is an excellent value.
20 Litres
205 Litres
Flywheel, Crank,
& Surface Grinding
LEXHONE 50E-20
LEXHONE 50E-205
Lexhone 30E
HPC 653
Lexhone’s economy honing oil. Sufficient
quality for the cost conscious user.
BE IN THE PINK!
Pink cutting coolant. The best soluble cutting
coolant for crankshaft grinders, surface grinders, belt grinders and flywheel grinders.
20 Litres
205 Litres
Super clean HPC 653 Pink Coolant provides
faster grinding by reducing stone loading and
4 Litres
20 Litres
Lexhone Concentrate
Eliminate expensive freight costs. Approximately
70% the quality of Lexhone 50E.
HPC-653
HPCO-653
1:8 and 1:6 mix ratios depending on additive used.
Valve Grinding Oil
4 Litres
20 Litres
TRUKUT 122
Specially formulated grinding oil for use in all
valve refacing machines. Extends wheel life
while allowing for a better surface finish and
cooling of work piece.
4 Litres
20 Litres
LEXHONE CNT-4
LEXHONE CNT-20
Replacement Honing Filter
For Sunnen & other honing equipment
Microlite Filter
TRUKUT 122
TRUKUT 122-20
166949
*Quantity Discounts Available.
DRY GRAPHITE LUBE SPRAY
A fast drying lubricant that forms a thin, black
film providing excellent anti-friction and antiseizure properties to surfaces. ALL POSITION
valve allows can to be used in any position.
May be used as a parting compound on dies,
sand cores & match plates.
14 oz Aerosol Can
LEXHONE 30E-20
LEXHONE 30E-205
M620-1506
2
Benefits:
•
•
•
•
•
•
Minimizes dust & dirt pick-up
Inert to oils, water & alkalies
Has broad temperature range
Does not contain oil or water base
Pieces can be used immediately
Performs under extreme pressures
PART NO.
MACHINE TYPE
VALVE SEAT GRINDER/ PISTON &
ROD GRINDERS/DRUM LATHE
TFM300
B&D 5574, SKIL, SIOUX 112, THOR
74448, VAN DORN (EXCEPT 302&
302H), SUNNEN GRC-500
DRUM LATH/PISTON GRINDER
TFM301
BARRET, VAN NORMAN 302, 302H,
75, 76 RELIO
TFM302
B&D 20157, TOBIN ARP (S&D), VAN
DORN, THOR 74327.
VALVE SEAT GRINDER
TFM303
TFM304
TFM305
TFM306
VALVE REFACER
KWIK-WAY, TOBIN ARP (S&D)
VALVE SEAT GRINDER/VALVE
REFACER/ ROD GRINDER
K-W VALVE MASTER, S/V #65, VN
VR-1000.
VALVE SEAT GRINDER
SCREW NIB
VALVE SEAT GRINDER/
VALVE REFACER
SIOUX 1715, KWIK-WAY (NSG), THOR
TFM308
TFM310
VALVE SEAT GRINDER/
VALVE REFACER
HALL 13-11977, KWIK-WAY, KO LEE
A173, VAN NORMAN, K.R. WILSON
VALVE SEAT GRINDER/
VALVE REFACER
HALL HD (13-1938P)
TFM311
TFM312
TFM315
VALVE SEAT GRINDER
VAN NORMAN
VALVE SEAT GRINDER
SIOUX HEAVY DUTY 1715B
VALVE SEAT GRINDER
SIOUX HEAVY DUTY 1715A
VALVE SEAT GRINDER
TFM316
TFM317
HALL HEAVY DUTY (13-1938P), SKIL,
SNAP ON, B&D, U.S.
VALVE REFACER
KWIK-WAY CV, SV, VS
VALVE SEAT GRINDER
TFM318
KWIK-WAY HEAVY DUTY
DESCRIPTION
CARET
3/8” x 1-5/8”
ROUND
1/5
3/8” x 3”
ROUND
1/5
3/8” x 2-1/4” 24 NF THREAD
1/5
5/16” x 2-1/2”
ROUND
1/5
1/2” x 3-1/4 –
20 NF THREAD
1/5
3/8” HEAD 1032 THREAD
-
3/8” x 2-3/4” NF THREAD
1/5
1/4” x 1” STEP
TYPE
1/5
5/16” x 2-1/4” 24NC THREAD
1/5
1/4” x 2”
1/5
3/8” HEX
RIGHT– HAND
THREAD
1/5
3/8” x 2-3/4” 24NF THREAD
1/2
5/16” x 2-1/4” 24NF THREAD
1/5
7/16”x2-3/4” 20NF THREAD
1/5
1/2” x 3” - 20NF
THREAD (HALF
LENGTH)
1/5
*Other diamond dressing tools available by special order– please contact us for more information.
3
VALVE
GUIDE TOOLS
& SUPPLIES
DIAMOND
DRESSING
TOOLS
DIAMOND DRESSING TOOLS
VALVE GUIDE TOOLS & SUPPLIES
BRONZE GUIDE SLEEVES
Constructed of the finest materials, these bronze sleeves offer the best
value for the job. Bronze guide sleeves come in both smooth wall and
diamond pattern design. A most sizes are ready to ship today!
Diamond patterned guide sleeve have hundreds of indentations formed
throughout the inside surface to provide greater lubricant retention over
a wider surface area than any other system.
For Diamond Bronze Liners change part no. prefix from “GS” to “DS” .
Sold in boxes of 100
Sleeve
Sleeve ID Sleeve
Nominal
Min Finish Length
Size
5mm
5.5mm
6mm
6.6mm
7mm
5/16"
0.195"
0.214"
0.216"
0.217"
0.234"
0.235"
0.236"
0.238"
0.240"
0.258"
0.259"
0.261"
0.272"
0.272"
0.274"
0.274"
0.275"
0.275"
0.275"
0.276"
0.277"
0.277"
0.277"
0.279"
0.306"
0.306"
0.309"
0.309"
0.309"
0.311"
0.311"
0.311"
2.500"
2.250"
2.250"
2.500"
2.500"
2.500"
2.500"
2.500"
2.500"
2.500"
2.500"
2.500"
2.500"
3.062"
2.500"
3.062"
2.000"
2.500"
3.062"
2.500"
2.000"
2.500"
3.062"
2.500"
2.000"
2.500"
2.000"
2.500"
3.062"
2.000"
2.500"
3.062"
Part No.
DS 2696
DS 2089
DS 2694
DS 2001
DS 2081
DS 2067
DS 2002
DS 2692
DS 2102
DS 2076
DS 2662
DS 2003
DS 2059
DS 2084
DS 2075
DS 2091
DS 2078
DS 2004
DS 2056
DS 2088
DS 2077
DS 2063
DS 2086
DS 2690
DS 2027
DS 2028
DS 2025
DS 2026
DS 2066
DS 2005
DS 2006
DS 2007
Size in
metric
4.95mm
5.44mm
5.49mm
5.51mm
5.94mm
5.97mm
5.99mm
6.05mm
6.01mm
6.55mm
6.58mm
6.63mm
6.91mm
6.91mm
6.96mm
6.96mm
6.99mm
6.99mm
6.99mm
7.01mm
7.04mm
7.04mm
7.04mm
7.09mm
7.77mm
7.77mm
7.85mm
7.85mm
7.85mm
7.90mm
7.90mm
7.90mm
4
Sleeve Size
Deviation
.002"
.002"
.002"
.002"
.004"
.003"
.002"
.003"
.003"
.001"
.001"
.002"
.002"
.002"
.004"
.005"
.005"
.002"
.002"
.002"
Standard
Undersize
Standard
Standard
Undersize
Undersize
Standard
Oversize
Oversize
Undersize
Undersize
Standard
Undersize
Undersize
Undersize
Undersize
Standard
Standard
Standard
Standard
Oversize
Oversize
Oversize
Oversize
Undersize
Undersize
Undersize
Undersize
Undersize
Standard
Standard
Standard
Reamer
size
Bored
Hole Max
ID
0.2140
0.2500
0.2500
0.2500
0.2660
0.2660
0.2660
0.2660
0.2660
0.2910
0.2910
0.2910
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3080
0.3410
0.3410
0.3410
0.3410
0.3410
0.3410
0.3410
0.3410
0.2145
0.2505
0.2505
0.2505
0.2667
0.2667
0.2667
0.2667
0.2667
0.2915
0.2915
0.2915
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3095
0.3425
0.3425
0.3425
0.3425
0.3425
0.3425
0.3425
0.3425
Sleeve
Sleeve ID Sleeve
Nominal
Min Finish Length
Size
0.311"
0.311"
0.313"
0.313"
8mm
11/32"
11/32"
9mm
0.314"
0.314"
0.314"
0.315"
0.315"
0.316"
0.316"
0.316"
0.317"
0.317"
0.318"
0.337"
0.339"
0.339"
0.339"
0.339"
0.340"
0.340"
0.340"
0.340"
0.341"
0.342"
0.342"
0.342"
0.342"
0.342"
0.343"
0.344"
0.344"
0.344"
0.352"
0.354"
0.354"
0.354"
0.356"
11/32"
0.359"
2.000"
2.500"
2.000"
2.500"
2.000"
2.500"
3.062"
2.100"
2.500"
2.000"
2.500"
3.062"
2.000"
Part No.
DS 2032
DS 2033
DS 2698
DS 2695
DS 2029
DS 2030
DS 2031
DS 2058
DS 2068
DS 2008
DS 2009
DS 2010
DS 2699
Size in
metric
7.90mm
7.90mm
7.95mm
7.95mm
7.98mm
7.98mm
7.98mm
8.00mm
8.00mm
8.03mm
8.03mm
8.03mm
8.05mm
8.05mm
3.062"
2.500"
2.500"
2.100"
2.250"
2.500"
3.062"
2.100"
2.250"
2.500"
3.062"
2.500"
2.000"
2.100"
2.250"
2.500"
3.062"
2.500"
2.250"
2.500"
3.062"
3.062"
2.500"
3.062"
3.500"
DS 2053
DS 2011
DS 2080
DS 2038
DS 2039
DS 2040
DS 2042
DS 2034
DS 2035
DS 2036
DS 2037
DS 2057
DS 2085
DS 2012
DS 2013
DS 2014
DS 2015
DS 2691
DS 2700
DS 2016
DS 2061
DS 2062
DS 2017
DS 2054
DS 2069
8.74mm
8.74mm
8.94mm
8.99mm
8.99mm
8.99mm
2.500"
2.600"
DS 2693
9.04mm
9.12mm
DS 2041
8.08mm
8.56mm
8.61mm
8.61mm
8.61mm
8.61mm
8.64mm
8.64mm
8.64mm
8.64mm
8.66mm
8.69mm
8.69mm
8.69mm
8.69mm
8.69mm
8.71mm
8.74mm
5
Sleeve Size
Reamer
size
Bored
Hole Max
ID
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Standard
Standard
Standard
Oversize
Oversize
Oversize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Undersize
Standard
Standard
Standard
Standard
Standard
Oversize
Oversize
Oversize
Oversize
Undersize
Standard
Standard
Standard
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3455
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3720
0.3850
0.3850
0.3850
0.3850
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3470
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3735
0.3865
0.3865
0.3865
0.3865
Oversize
Oversize
0.3850
0.3870
0.3865
0.3885
Deviation
.005"
.005"
.003"
.003"
.002"
.002"
.002"
.001"
.001"
.001"
.001"
.002"
.005"
.003"
.003"
.003"
.003"
.002"
.002"
.002"
.002"
.001"
.001"
.002"
.002"
.002"
.002"
.002"
.015"
Sleeve Size
Reamer
size
Bored
Hole Max
ID
Undersize
0.4040
0.4055
.005"
Undersize
0.4040
0.4055
9.37mm
.005"
Undersize
0.4040
0.4055
DS 2697
9.42mm
.003"
Undersize
0.4040
0.4055
2.500"
DS 2087
9.42mm
.003"
Undersize
0.4040
0.4055
0.372"
2.250"
DS 2043
9.45mm
.002"
Undersize
0.4040
0.4055
0.372"
2.500"
DS 2044
9.45mm
.002"
Undersize
0.4040
0.4055
0.372"
2.600"
DS 2046
9.45mm
.002"
Undersize
0.4040
0.4055
0.372"
3.062"
DS 2045
9.45mm
.002"
Undersize
0.4040
0.4055
0.374"
2.250"
DS 2018
9.50mm
Standard
0.4040
0.4055
0.374"
2.500"
DS 2019
9.50mm
Standard
0.4040
0.4055
0.374"
2.600"
DS 2020
9.50mm
Standard
0.4040
0.4055
0.374"
3.062"
DS 2021
9.50mm
Standard
0.4040
0.4055
0.376"
2.500"
DS 2073
9.55mm
.002"
Oversize
0.4040
0.4055
0.376"
3.062"
DS 2072
9.55mm
.002"
Oversize
0.4040
0.4055
0.389"
2.600"
DS 2082
9.88mm
.015"
Oversize
0.4170
0.4185
0.393"
3.062"
DS 2071
9.98mm
.002"
Undersize
0.4240
0.4255
0.395"
2.500"
DS 2022
10.03mm
Standard
0.4240
0.4255
0.395"
3.062"
DS 2060
10.03mm
Standard
0.4240
0.4255
0.431"
2.500"
DS 2050
10.95mm
.005"
Undersize
0.4660
0.4675
0.431"
3.062"
DS 2051
10.95mm
.005"
Undersize
0.4660
0.4675
0.432"
3.062"
DS 2065
10.97mm
.002"
Undersize
0.4660
0.4675
0.434"
2.500"
DS 2052
11.02mm
Standard
0.4660
0.4675
0.434"
3.062"
DS 2064
11.02mm
Standard
0.4660
0.4675
0.434"
2.500"
DS 2055
11.02mm
Undersize
0.4660
0.4675
0.436"
2.500"
DS 2023
11.07mm
Standard
0.4660
0.4675
0.436"
3.062"
DS 2024
11.07mm
Standard
0.4660
0.4675
0.469"
3.062"
DS 2074
11.91mm
Standard
0.5000
0.5015
0.470"
3.062"
DS 2079
11.94mm
Standard
0.5000
0.5015
0.471"
3.062"
DS 2090
11.96mm
Standard
0.5000
0.5015
Sleeve
Sleeve ID Sleeve
Nominal
Min Finish Length
Size
Part No.
0.369"
2.250"
DS 2047
9.37mm
.005"
0.369"
2.500"
DS 2048
9.37mm
0.369"
3.062"
DS 2049
0.371"
2.250"
0.371"
3/8"
10mm
7/16"
11mm
7/16"
12mm
Size in
metric
6
Deviation
.002"
INSTALLATION KITS
INSTALL TOOL KITS WITH BALL
SIZER
5.5mm KIT
B
BP 1120 Ball pusher for 5.5 and 6.0 mm
G AD 1100 Auto-driver 5.5& 6.0 mm
S CR 1080 Carbide reamer 5.5 mm
K BS 2165 Carbide ball sizer.2165
1 BS 2175 Carbide ball sizer.2175
2 BS 218 Carbide ball sizer.218
4 TP 1201 Trim. tool Pilot
RT 1240 Removal Tool-Std. S 5.5 mm
0 RBC1049 Reamer Bushing 5.5 mm
B
G
S
K
1
2
4
1
6mm KIT
BP1120
AD1100
CR1081
BS 236
BS 237
BS 238
TP 1201
RT 1241
RBC1050
Ball pusher for 5.5 and 6.0 mm
Auto-driver 5.5 AND 6.0 mm
Carbide reamer 6.0 mm
Carbide ball sizer.236
Trim. tool Pilot
Removal Tool-Std. Sleeve 6.0 mm
Reamer Bushing 6.0 mm
6.6mm KIT
B
G
S
K
1
2
4
2
B
G
S
K
1
2
5
2
BP1122
AD1101
CR1082
BS 261
BS 262
BS 263
Ball pusher for 6.6 and 7.0 mm
Auto-driver 6.6 mm
TP 1202 Trim. tool Pilot
RT 1242 Removal Tool-Std. Sleeve 6.6 mm
RBC1051 Reamer Bushing 6.6 & 7.0 mm
7/16" KIT
Ball pusher for 7/16” and larger
Auto-driver 7/16” & 11.0mm
Carbide reamer 7/16” & 11.0 mm
Carbide ball sizer.436"
Trim. tool Pilot for 7/16” & 11.0mm
Removal Tool-Std. Sleeve 7/16”
Reamer bushing 10 mm, 11 mm &
RBC1053
7/16"
BP 1123
AD 1108
CR 1090
BS 436
BS 437
BS 438
TP 1206
RT 1250
BROACH
5.5mm KIT
B BBD100A Ball broach driver for 5.0mm - 8.0mm
B AD 1100 Auto-driver 5.5& 6.0 mm
K CBB2165 0.2165 carbide ball broacher
1 CBB2175 0.2175 carbide ball broacher
2 CBB 218 0.2180 carbide ball broacher
4 TP 1201 Trim. tool Pilot for 5.5 mm & 6.0 mm
0 RT 1240 Removal Tool-Std. Sleeve 5.5 mm
RBC1049 Reamer Bushing 5.5 mm
B
B
S
K
1
2
4
1
6mm KIT
BBD100A
AD 1100
CR 1081
CBB 236
CBB 237
CBB 238
TP 1201
RT 1241
RBC1050
Ball broach driver for 5.0mm - 8.0mm
Auto-driver 5.5 AND 6.0 mm
0.2360
carbide ball broacher
0.2370
0.2380
Trim. tool Pilot for 5.5 mm & 6.0 mm
Removal Tool-Std. Sleeve 6.0 mm
Reamer Bushing 6.0 mm
6.6mm KIT
B BBD100A Ball broach driver for 5.0mm - 8.0mm
B AD 1101 Auto-driver 6.6 mm
0.2610
K CBB 261
CBB
262
0.2620
1
CBB
263
0.2630
2
TP 1202 Trim. tool Pilot for 6.6 mm & 7.0 mm
4
RT 1242 Removal Tool-Std. Sleeve 6.6 mm
2
RBC1051 Reamer Bushing 6.6 & 7.0 mm
7/16" KIT
B BBD 200A Ball broach driver for 11/32" - 12.0mm
B AD 1108 Auto-driver 7/16” & 11.0mm
S CR 1090 Carbide reamer 7/16” & 11.0 mm
K CBB 436 0.436 carbide ball broacher
CBB 437 0.437 carbide ball broacher
1 CBB 438 0.438 carbide ball broacher
2 TP 1206 Trim. tool Pilot for 7/16” & 11.0mm
5 RT 1250 Removal Tool-Std. Sleeve 7/16”
2 RBC 1053 Reamer bushing 10 mm, 11 mm &
7/16"
NOTE:EACH KIT COMES IN A DURABLE PLASTIC TOOL BOX. TRIMMING TOOL SOLD SEPERATELY
7
BRONZE GUIDE SLEEVE
BRONZE GUIDE LINER
INSTALLATION KITS
SIZER
8mm KIT
8mm KIT
B
G
S
K
1
2
4
5
BP1121
AD1103
CR1085
BS 316
BS 317
BS 318
BS 319
TP1203
RT1245
RBC1052
Ball pusher for 5/16",3/8" & 8.0 mm
Auto-driver 5/16", 8.0 mm
Trim. tool Pilot
Removal Tool- 8.0 mm
Reamer Bushing
9mm KIT
B
G
S
K
1
2
4
6
BP1121
AD1105
CR1087
BS 354
BS 355
BS 356
TP1207
RT 247
RBC1052
Ball pusher for 9.0 mm
Auto-driver 9.0 mm
Trim. tool Pilot
Removal Tool-9.0 mm
B
B
S
K
1
2
4
5
BBD100A
AD 1103
CR 1085
CBB 316
CBB 317
CBB 318
CBB 319
TP 1203
RT 1245
RBC1052
Ball broach driver for 5.0mm - 8.0mm
Auto-driver 5/16", 8.0 mm
0.3160 carbide ball broacher
Trim. tool Pilot
Reamer Bushing
B
B
S
K
1
2
4
6
BBD200A
AD 1105
CR 1087
CBB 354
CBB 355
CBB 356
TP 1207
RT 1247
Ball broach driver for 11/32"-12.0mm
Auto-driver 9.0 mm
0.3540
0.3550
0.3560
Trim. tool Pilot for 9.0 mm
B
B
S
K
1
2
4
7
BBD200A
AD 1104
CR 1086
CBB 343
CBB 344
CBB 3445
CBB 345
TP 1204
RT 1246
RBC1052
Reamer Bushing 5/16", 8.0mm,
11/32", 9.0mm, 3/8"
9mm KIT
Reamer Bushing 5/16", 8.0mm, 11/32",
RBC1052 9.0mm, 3/8"
11/32" KIT
B
G
S
K
1
2
4
7
BP1121
AD1104
CR1086
BS 343
BS 344
BS 3445
BS 345
TP 1204
RT 1246
RBC1052
11/32" KIT
Ball pusher for 11/32"and 3/8"
Auto-driver 11/32"
Carbide reamer 11/32"
Trim. tool Pilot for 11/32"
Removal Tool-11/32"
Reamer Bushing 11/32”
Auto-driver 11/32"
Carbide reamer 11/32"
0.3430
0.3440
0.3445
0.3450
Trim. tool Pilot for 11/32"
Removal Tool-Std. Sleeve 11/32"
Bushing 5/16", 8mm, 11/32", 9mm, 3/8"
3/8" KIT
3/8" KIT
B
G
S
K
1
2
4
8
BROACH
B
B
S
K
1
2
4
8
Ball pusher for 11/32”and 3/8”
Auto-driver 3/8”
Carbide reamer 3/8”
Trim. tool Pilot for 3/8”
Reamer Bushing 5/16", 8.0mm,
RBC1052
11/32", 9.0mm, 3/8"
BP1121
AD1106
CR1088
BS 373
BS 374
BS 375
TP1205
RT1248
BBD200A
AD 1106
CR 1088
CBB 373
CBB 374
CBB 375
TP 1205
CTP 1225
RT 1248
RBC1052
Auto-driver 3/8”
Carbide reamer 3/8”
Trim. tool Pilot for 3/8”
Carb. trim. tool Pilot to fit 3/8”
Bushing 5/16", 8mm, 11/32", 9mm, 3/8"
NOTE:EACH KIT COMES IN A DURABLE PLASTIC TOOL BOX. TRIMMING TOOL SOLD SEPERATELY
8
& PILOTS
Part No.
Description
CTT 1220
CTP 1221
CTP 1222
CTP 1223
CTP 1224
CTP 1225
CTP 1226
CTP 1227
CTP 1228
CTC 1229
CTS 1230
CTP 1231
Trim Tool for all sizes 5/8" o.d.
pilot to fit 5.5 & 6.0 mm
pilot to fit 6.6 & 7.0 mm
pilot to fit 5/16" & 8.0 mm
pilot to fit 11/32"
pilot to fit 3/8"
pilot to fit 9.0 mm
pilot to fit 10.0 mm
pilot to fit 11.0 mm & 7/16"
replacement carbide inserts
replacement screws for carbide inserts
pilot to fit
12.0 mm
Part No.
TT 1200
TP 1201
TP 1202
TP 1203
TP 1204
TP 1205
TP 1206
TP 1207
TP 1208
TP 1209
TP 1210
Description
Trimming Tool (for all sizes, 1/2" O.D.)
5.5 mm & 6.0 mm pilot
6.6 mm & 7.0 mm pilot
5/16" & 8.0 mm pilot
11/32" pilot
3/8" pilot
7/16", 11mm pilot
9.0 mm pilot
10.0 mm pilot
12.0 mm pilot
5.0 mm pilot
CARBIDE TRIMMING
TOOL& PILOTS
Tool relieves two sides of the old
guide, neatly and quickly removing
sleeve without touching original
reamed holes, leaving it ready for a
new installation.
REMOVAL TOOL
FOR BRONZE GUIDE SLEEVES
STANDARD
Part No.
RT 1240
RT 1241
RT 1242
RT 1243
RT 1244
RT 1245
RT 1246
RT 1247
RT 1248
RT 1249
RT 1250
RT 1256
RT 1257
RT 1258
Description
5.5 mm
6.0 mm
6.6 mm
7.0 mm
5/16"
8.0 mm
11/32"
9.0 mm
3/8"
10 mm
7/16"
12.0 mm
11.0 mm
5.0 mm
for standard sleeves
UNDERSIZE
Part No.
RT 1251
RT 1252
RT 1253
RT 1254
RT 1255
Description
5/16"
8.0 mm
11/32"
3/8"
7/16"
for undersize sleeves
OVERSIZE
RT 1259
9
3/8"
for oversize sleeves
TRIMMING TOOL
Part No.
“AUTO-DRIVER”
FOR BRONZE SLEEVE INSALLATION
The Auto-Driver makes installation quick and easy.
Description
AD 1100
AD 1101
AD 1102
5.5 & 6.0 mm auto-driver
6.6 mm auto-driver
7.0 mm auto-driver
AD 1103
AD 1104
AD 1105
AD 1106
AD 1107
AD 1108
AD 1109
AD 1110
5/16" & 8.0 mm auto-driver
11/32" auto-driver
9.0 mm & 11/32" oversize auto-driver
3/8" auto-driver
10.0 mm & 3/8" oversize auto-driver
7/16" & 11.0 mm auto-driver
12.0 mm auto-driver
5.0mm auto-driver
T-WRENCH
CHAMFER TOOL
(DEBURRING TOOL)
PART NO. TW-1270
PART NO. CHT-1260
Six flutes, 45°. Removes burr on
all sizes of guide casting, before
sleeve installation.
Holds the Chamfering tool for manual
deburring. Adjustable to hold shank
sizes from 1/4” to 5/16” diameter.
AIR REGULATOR
VALVE
UNIVERSAL DRIVER
ATTACHMENT
PART NO. BT-3002
Added to Part No. BT-3001
Air Hammer, the air regulator valve allows operator
total variable control of
hammer speed and power
for installation.
PART NO. BT-3004
Fits into Air Hammer spring retainer and
powers all installation, sizing and removal
AIR HAMMER
HAND-HELD REAM JIG
PART NO. BT-3001
PART NO. RF-980
Lightweight, very short stroke Air Hammer,
ideal for Bronze
guide sleeve installation. Stroke 15/8”, B.P. M. 3500
maximum: longer
stroke hammers
are not recommended for sleeve
installation, or in
ball-sizing opera-
Quickly and easily ream out valve guides.
The Hand-Held Ream Jig
will become your favorite tool! It will pay for
itself in many ways, and in a very short
time. Your time and labour costs will be
dramatically reduced and the quality of the
finished job will be greatly enhanced plus,
spoilage will significantly decreased.
10
Each tool consists of 1 carbide boring tool,
reamer bushing, spring and top retainer collar.
Part No.
CR 1080
CR 1081
CR 1082
CR 1083
CR 1084
CR 1085
CR 1086
CR 1087
CR 1088
CR 1089
CR 1090
CR 1092
CR 1094
CR 1095
CR 1096
CR 1097
CR 1098
CR 1099
CR 1100
CR 1102
CR 1103
CR 1104
Size
5.5 mm (.250)
6.0 mm (.266)
6.6 mm (.291)
7.0 mm (.308)
5/16" (.341)
8.0 mm (.3455)
11/32" (.372)
9.0 mm (.385)
3/8" (.404)
10.0 mm (.424)
7/16"&11.0mm (.466)
12.0 mm (.500)
3/8" Pilot+.019
11/32" Long
3/8" Long
11/32" -.0135
3/8" -.0155
8.00 mm Spiral
9 mm Pilot+.007
11/32 + .015
3/8 + .015
5 mm (.214)
CBT 1510
CBT 1520
CBT 1530
CBT 1550
CBT 1600
CBT 1610
CBT 1620
CBT 1630
CBT 1640
CBT 1650
CBT 1660
CBT 1670
Description
5/16" Boring Accessory
5.5mm Boring Accessory
6mm Boring Accessory
6.6mm Boring Accessory
CARBIDE REAMERS
These reamers offer the ultimate in
precision, speed and durability. Custom made to exacting specifications
with carbide inserts that run through
both the flute and pilot portion of the
reamers. These new tools are to be
spun at minimum 1500 to 2500 RPM
and life of the reamer is expected to be
many times that of quality high-speed
steel reamers.
REAMER BUSHINGS
These hardened reamer bushings are designed
to ride the shaft of the carbide reamers and fit
precisely into the seat collars. Bushings are
also available for K-Line Carbide reamers as
listed below.
11
Part No.
RBC 1049
Description
5.5 mm
RBC 1050
RBC 1051
RBC 1052
RBC 1053
RBC 1054
RBC 1055
RBC 1056
RBC 1057
RBC 1058
RBC 1059
RBC 1060
RBC 1061
6.0 mm
6.6 & 7.0 mm
5/16", 8.0mm, 11/32", 9.0mm, 3/8"
10 mm, 11 mm, 7/16", 12 mm
KL3571C 6.6mm
KL3676C 7.0mm
KL1719C 5/16"
KL3581C 8.0mm
KL1725C 11/32"
KL1735C 3/8"
KL1749C 7/16"
12.0mm
Part No.
CARBIDE BORING
TOOLS
CARBIDE BALL SIZERS
These carbide ball-sizers are the ultimate in sizing precision and durability. Tungsten carbide balls are in the 90 Rockwell range, precision machined to exact specs
and finished to .0000008” (8 millionths of an inch) perfect roundness.
NOTE: When used to re-size bronze guide sleeves, remember that finished
I.D. of sleeve will be .001 smaller than actual ball size.
Part No.
BS196
BS1965
BS197
BS 2165
BS 2175
BS 218
BS 236
BS 237
BS 238
BS 240
BS 2405
BS 241
BS 259
BS 260
BS 261
BS 262
BS 263
BS 274
BS 276
BS 277
BS 278
BS 310
BS 311
BS 312
BS 3125
BS 313
BS 314
BS 315
BS 316
BS 317
BS 318
BS 319
BS 320
BS 3395
BS 340
BS 342
BS 343
BS 3435
BS 344
BS 3445
BS 345
BS 3455
BS 346
5.0mm
5.0mm
5.0mm
5.5mm
5.5mm
5.5mm
6.0mm
6.0mm
6.0mm
6.1mm
6.1mm
6.1mm
6.6mm
6.6mm
6.6mm
6.6mm
6.6mm
7.0mm
7.0mm
7.0mm
7.0mm
5/16"
5/16"
5/16"
5/16"
5/16"
8.0mm
8.0mm
8.0mm
8.0mm
8.0mm
8.0mm
8.02mm
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
Size
0.1960
0.1965
0.1970
0.2165
0.2175
0.2180
0.2360
0.2370
0.2380
0.2400
0.2405
0.2410
0.2590
0.2600
0.2610
0.2620
0.2630
0.2740
0.2760
0.2770
0.2780
0.3100
0.3110
0.3120
0.3125
0.3130
0.3140
0.3150
0.3160
0.3170
0.3180
0.3190
0.3200
0.3395
0.3400
0.3420
0.3430
0.3435
0.3440
0.3445
0.3450
0.3455
0.3460
Part No.
BS 354
BS 355
BS 356
BS 359
BS 3595
BS 3695
BS 370
BS 372
BS 373
BS 374
BS 3745
BS 375
BS 3755
BS 376
BS 389
BS 3895
BS 394
BS 395
BS 396
BS 433
BS 436
BS 437
BS 438
BS 4335
BS 434
BS 435
BS 471
BS 472
BS 473
BS 4735
BS 4745
9.0mm
9.0mm
9.0mm
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
10.0mm
10.0mm
10.0mm
10.0mm
10.0mm
7/16"
7/16"
7/16"
7/16"
11.0mm
11.0mm
11.0mm
11.96mm
11.98mm
12.01mm
12.03mm
12.05mm
Size
0.3540
0.3550
0.3560
0.3590
0.3595
0.3695
0.3700
0.3720
0.3730
0.3740
0.3745
0.3750
0.3755
0.3760
0.3890
0.3895
0.3940
0.3950
0.3960
0.4330
0.4360
0.4370
0.4380
0.4335
0.4340
0.4350
0.4710
0.4720
0.4730
0.4735
0.4745
BALL PUSHERS
PART NO.
BP 1120
BP 1121
BP 1122
BP 1123
BP 1124
12
Description
5.5 & 6.0 mm sleeves
3/8", 11/32", 8.0 mm, 5/16" sleeves
6.6 mm, 7.0 mm
7/16" & larger sleeves
5.0 mm sleeves
Size your Guide Sleeves quickly and simply with these durable ball broaches– eliminates reaming or honing!
Part No.
CBB 196
CBB 1965
CBB 197
CBB 2165
CBB 2175
CBB 218
CBB 236
CBB 237
CBB 238
CBB 240
CBB 2405
CBB 241
CBB 259
CBB 260
CBB 261
CBB 262
CBB 263
CBB 274
CBB 276
CBB 277
CBB 278
CBB 310
CBB 311
CBB 312
CBB 3125
CBB 313
CBB 314
CBB 315
CBB 316
CBB 317
CBB 318
CBB 319
CBB 320
CBB 3395
CBB 340
CBB 342
CBB 343
CBB 3435
CBB 344
CBB 3445
CBB 345
CBB 3455
CBB 346
CBB 354
CBB 355
CBB 356
5.0mm
5.0mm
5.0mm
5.5mm
5.5mm
5.5mm
6.0mm
6.0mm
6.0mm
6.1mm
6.1mm
6.1mm
6.6mm
6.6mm
6.6mm
6.6mm
6.6mm
7.0mm
7.0mm
7.0mm
7.0mm
5/16"
5/16"
5/16"
5/16"
5/16"
8.0mm
8.0mm
8.0mm
8.0mm
8.0mm
8.0mm
8.02mm
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
11/32"
9.0mm
9.0mm
9.0mm
Size
Part No.
0.1960
0.1965
0.1970
0.2165
0.2175
0.2180
0.2360
0.2370
0.2380
0.2400
0.2405
0.2410
0.2590
0.2600
0.2610
0.2620
0.2630
0.2740
0.2760
0.2770
0.2780
0.3100
0.3110
0.3120
0.3125
0.3130
0.3140
0.3150
0.3160
0.3170
0.3180
0.3190
0.3200
0.3395
0.3400
0.3420
0.3430
0.3435
0.3440
0.3445
0.3450
0.3455
0.3460
0.3540
0.3550
0.3560
CBB 359
CBB 3595
CBB 3695
CBB 370
CBB 372
CBB 373
CBB 374
CBB 3745
CBB 375
CBB 3755
CBB 376
CBB 389
CBB 3895
CBB 394
CBB 395
CBB 396
CBB 433
CBB 436
CBB 437
CBB 438
CBB 4335
CBB 434
CBB 435
CBB 471
CBB 472
CBB 473
Size
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
10.0mm
10.0mm
10.0mm
10.0mm
10.0mm
7/16"
7/16"
7/16"
7/16"
11.0mm
11.0mm
11.0mm
12.0mm
12.0mm
12.0mm
0.3590
0.3595
0.3695
0.3700
0.3720
0.3730
0.3740
0.3745
0.3750
0.3755
0.3760
0.3890
0.3895
0.3940
0.3950
0.3960
0.4330
0.4360
0.4370
0.4380
0.4335
0.4340
0.4350
0.4710
0.4720
0.4730
BROACH HOLDER/ DRIVER
Part No.
Size
BBD 100A 5.0mm - 8.0mm sizes
BBD 100B Replace. bumper for BBD 100A
BBD 200A 11/32" - 12.0mm sizes
BBD 200B Replace. bumper for BBD 200A
13
CARBIDE BALL BROACHES
SEAT COLLARS
Seat Collars have a 45° angle on one side and a 30° andle on the opposite side.
They add the upper control of tooling that locks on the existing seat for precise
reaming of new holes.
Part No.
SC 1010
SC 1011
SC 1012
SC 1013
SC 1014
SC 1015
SC 1016
SC 1020
SC 1021
SC 1022
SC 1023
SC 1024
Description
1"
1-3/16"
1-3/8"
1-5/8"
1-3/4"
2"
2-1/4"
1-1/4"
1-1/2"
1-3/4"
2-1/4"
1"
seat collars (90°)
seat collars (90°)
seat collars (90°)
seat collars (90°)
seat collars (90°)
seat collars (90°)
seat collars (90°)
seat collars (60°)
seat collars (60°)
seat collars (60°)
seat collars (60°)
seat collars (60°)
REAMING FIXTURE
MODEL NO. RF990
Specifications:
Dimensions: 33” x 17” x 15”
Weight: 75 lbs
All welded heavy-duty steel construction
Air piston provides 300lbs hold down
pressure.
All hold down parts are precision made
to be free to self-adjust while clamping.
An air operated bench model which provides the mechanical means to precision
ream valve guides and to facilitate installation of the Valve Guide Sleeve. Suitable for
all popular cast iron and aluminum cylinder heads.
14
REK-1031
5.5 to 1 gear reduction. Fits 1/4” or larger drill. Comes with 1/4” output drive adapter.
Small Hole Gauge Set
SMH001
Range: 1/8” to 1/2”
Ideal for checking valve guide wear and small hole diameters. Simply insert split ball in hole and expand by turning knob on
handle. Measurement is read with outside micrometer. No. 230
set comes with four gauges.
Designed for air impact drivers to install or remove all types of valve
guides. Heavy duty .401 Parker shank
fits all standard impact drivers. These
drivers replace the old “easy to break”
black drivers.
Air Valve Guide Driver
Part #
I.D.
O.D.
Part #
I.D.
O.D.
VGD5-3003
.260 (6.6mm)
.472 (12mm)
VGD5-3007
.375 (3/8”)
.500 (1/2”)
VGD5-3001
.275 (7mm)
.396 (10.5mm)
VGD5-3008
.437 (7/16”)
.625 (5/8”)
VGD5-3005
.312 (5/16”)
.500 (1/2)
VGD5-3019
5mm
9mm
VGD5-3002
.315 (8mm)
.476 (12.09mm)
VGD5-3020
5.5mm
11mm
VGD5-3006
.343 (11/32”)
.500 (1/2”)
VGD5-3021
6mm
11mm
Made from special hardened
alloy steel, these drivers are
designed to remove and install
all types of valve guides. They
also replace the old “easy to
break” black drivers.
Hand Valve Guide Driver
Part #
I.D.
O.D.
Part #
I.D.
O.D.
VGD5-3013
5/16”
7/16 (12mm)
VGD5-3011
6.6mm
.476
VGD5-3014
5/16”
1/2”
VGD5-3012
7mm
.396
VGD5-3016
11/32”
1/2”
VGD5-3015
8mm
12mm
VGD5-3017
3/8”
1/2”
VGD5-2997
5mm
9mm
VGD5-3018
7/16”
5/8”
VGD5-2998
5.5mm
11mm
VGD5-3010
6mm
7/16”
VGD5-2999
6mm
11mm
15
Speed Reducer With Handle
Power Valve Guide Brushes
Can be used with drill motor. Overall length of all sizes is 9 1/2” with 1/4” shaft.
Diameter
Steel Wire No.
Nylon Bristle No.
5/16”
11/32”
3/8”
7/16”
1/2”
5/8”
3/4”
Sets
RERVG-1
RERVG-2
RERVG-3
RERVG-5
RERVG-6
RERVG-7
RERVG-8
RERVG-18(1 of ea.)
RERVG-1Y
RERVG-2Y
RERVG-3Y
RERVG-5Y
RERVG-6Y
RERVG-7Y
RERVG-17Y (1 of ea.)
Nylon Valve Guide Brushes (with Loop Handle)
#6-12 nylon bristle valve guide brushes with loop handle for easier
manual use. Order as a set or individually. 2-1/2” brush length.
DIAM.
NO.
DIAM.
NO.
1/4”
BR11N
13/32”
BR48N
5/16”
BR13N
7/16”
BR49N
11/32”
BR47N
1/2”
BR44N
3/8”
BR14N
SET
BRVGNK
VALVE GUIDE FLEX-HONES
PART
SIZE
PART
SIZE
BRBC5M24
5MM
BRBC9M24
11/32”
BRBC55M24
5.5MM
BRBC95M24
9.5MM
BRBC64M24
1/4”
BRBC10M24
3/8”
BRBC7M24
7MM
BRBC11M24
7.16”
BRBC8M24
5/16”
BRBC12M24
12MM
Valve Guide Hone Kit
PART NO. REK-806M
Our most accurate method of honing valve guides to size.
Provides cross-hatch finish, even on hardened guides.
For sizes .240”-.427”.
Includes: hone assembly, 3 stone mandrels, 3 sets 220 grit stones, with storage box.
Individual Mandrel Part No.
Description
REK-807
Stone Mandrel– .240” - .302”
REK-808
REK-809
16
Our new REGIS (.020 range) adjustable pilots are excellent for those intermediate size
guides. Range of expansion will handle valve guides from -.003 to +.017
Neway: 3/8” (.375) top.
*Will also fit K.O. Lee, Snap-On, Winona, Black & Decker
Kwik-Way: 7/16” (.437) top.
Sioux: 3/8” +.010 (.385) top.
Neway*
No
REEC-236
REEC-250
REEC-256
REEC-275
REEC-312
REEC-335
REEC-343
REEC-354
REEC-375
REEC-437
KwikWay
REEK-236
REEK-250
REEK-256
REEK-275
REEK-312
REEK-335
REEK-343
REEK-354
REEK-375
REEK-437
Sioux No.
Decimal
REES-236
REES-250
REES-256
REES-275
REES-312
REES-335
REES-343
REES-354
REES-375
REES-437
.236
.250
.256
.275
.312
.335
.343
.354
.375
.437
Inches
MM
6mm
1/4”
5/16”
6.5mm
7mm
8mm
8.5mm
11/32”
9mm
3/8”
7/16”
Valve Seat Ring Cutters
REPLACEMENT VALVE SEAT RING CUTTERS for GUIDE and SEAT MACHINES
High grade carbide inserts spaced for balanced, chatter free cutting.
Specially ground for maximum metal removal while maintaining smooth on size bores.
Designed for all popular guide and seat machines.
Peterson/Kwik-Way
Winona / DCM Tech
5/8” arbor, female drive
9/16”arbor, female drive
REK-3830
REK-3830A
REK-3830B
REK-3830C
REK-3830D
REK-3830E
REK-3831
REK-3832
REK-3833
REK-3834
REK-3835
REK-3836
REK-3837
REK-3838
REK-3839
REK-3840
REK-3841
REK-3842
REK-3843
REK-3843-A
REK-3844
REK-3844-A
REK-3845
REK-3870
REK-3870A
REK-3870B
REK-3870C
REK-3870D
REK-3870E
REK-3871
REK-3872
REK-3873
REK-3874
REK-3875
REK-3876
REK-3877
REK-3878
REK-3879
REK-3880
REK-3881
REK-3882
REK-3883
REK-3883-A
REK-3884
REK-3884-A
REK-3885
Diameter
1
1-1/16
1-1/8
1-5/32
1-3/16
1-7/32
1-5/16
1-1/4
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
IDL/VAN NORMAN VALVE SEAT CUTTERS W/ REPLACABLE
CARBIDE CUTTERS ARE AVAILABLE FOR SPECIAL ORDER.
17
VALVE SEAT TOOLS & SUPPLIES
Aftermarket Expanding Pilots
VALVE SEAT GRINDING WHEELS
A WIDE SELECTION OF HIGH QUALITY ABRASIVES
RUBY-FINE
•
•
•
•
•
GENERAL PURPOSE
EXCELLENT FORM HOLDING
HARDENED SEAT ALLOYS
FINISHING STONE
CAST IRON/STELLITE
RUBY-COARSE
•
•
•
•
•
GENERAL PURPOSE
STELLITE ROUGHING
CAST IRON ROUGHING
WILL NOT GROOVE
GRAY
•
•
•
•
•
WHITE
EXCELLENT GENERAL PURPOSE
BEST ALL AROUND
FINE FINISH/LIGHT PRESSURE
CAST IRON FINISHING
STELLITE FINISH
•
•
•
•
•
GENERAL PURPOSE
STELLITE FINISHING
HARDENED SEAT ALLOYS
GOOD FINISH
13/16”-13 THREAD– KWIK-WAY
KWIKWAY RUBY - FINE
DIAMETER
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
KWIKWAY RUBY-COARSE
DIAMETER
NUMBER
(22mm)
(24mm)
(25mm)
(27mm)
(28mm)
(31mm)
(34mm)
(35mm)
(36mm)
(38mm)
(39mm)
(41mm)
(43mm)
(44mm)
(47mm)
(50mm)
(54mm)
(57mm)
(60mm)
(63mm)
R7364614
R7364615
R7364616
R7364617
R7364618
R7335280
R7363926
R7335281
R7363927
R7335282
R7363928
R7335283
R7363929
R7335284
R7335285
R7335286
R7335888
R7335287
R7335288
R7335289
NUMBER
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
R7335266
R7364094
R7335267
R7364095
R7335268
R7364096
R7335269
R7364097
R7335270
R7335271
R7335272
R7335890
R7335273
R7335274
R7335275
(31mm)
(34mm)
(35mm)
(36mm)
(38mm)
(39mm)
(41mm)
(43mm)
(44mm)
(47mm)
(50mm)
(54mm)
(57mm)
(60mm)
(63mm)
(31mm)
R335151
1-5/16”
(34mm)
R7363930
1-3/8”
(35mm)
R7335152
1-7/16”
(36mm)
R7363931
1-1/2”
(38mm)
R7335153
1-9/16”
(39mm)
R7363932
1-5/8”
(41mm)
R7335154
1 11/16”
(43mm)
R7363933
1-3/4”
(44mm)
R7335155
1-7/8”
(47mm)
R7335156
2”
(50mm)
R7335157
2-1/8”
(54mm)
R7335889
2-1/4”
(57mm)
R7335158
2-3/8”
(60mm)
R7335159
2-1/2”
(63mm)
R7333986
KWIKWAY WHITE- FINE
DIAMETER
KWIKWAY GRAY - FINE
DIAMETER
18
NUMBER
1-1/4”
NUMBER
1-1/4”
(31mm)
R7335318
1-5/16”
1-3/8”
(33mm)
(35mm)
R7363922
R7335319
1-7/16”
1-1/2”
(36mm)
(38mm)
R7363923
R7335320
1-9/16”
1-5/8”
(39mm)
(41mm)
R7363924
R7335321
1-11/16”
1-3/4”
(43mm)
(44mm)
R7363925
R7335322
1-7/8”
2”
(47mm)
(50mm)
R7335323
R7335339
2-1/8”
2-1/4”
(54mm)
(57mm)
R7335887
R7335340
2-3/8”
2-1/2”
(60mm)
(63mm)
R7335341
R7333987
11/16”-16 THREAD– SIOUX, K.O. LEE, THOR, WINONA, & SKILL
DIAMETER
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
SIOUX RUBY - COARSE
PRODUCT
NUMBER
(22mm)
(24mm)
(25mm)
(27mm)
(28mm)
(30mm)
(31mm)
(33mm)
(35mm)
(36mm)
(38mm)
(39mm)
(41mm)
(43mm)
(44mm)
(47mm)
(50mm)
(54mm)
(57mm)
(60mm)
(63mm)
R7364407
R7364408
R7364409
R7364410
R7335290
R7363913
R7335291
R7335292
R7335293
R7363914
R7335294
R7335295
R7335296
R7363915
R7335297
R7335298
R7335299
R7335300
R7335301
R7335302
R7335303
SIOUX GRAY- FINE
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
(28mm)
(30mm)
(31mm)
(33mm)
(35mm)
(36mm)
(38mm)
(39mm)
(41mm)
(43mm)
(44mm)
(47mm)
(50mm)
(54mm)
(57mm)
(60mm)
(63mm)
1-1/8”
(28mm)
R7335160
1-1/16”
(30mm)
R7363916
1-1/4”
(31mm)
R7335161
1-5/16”
(33mm)
R7335162
1-3/8”
(35mm)
R7335163
1-7/16”
(36mm)
R7363917
1-1/2”
(38mm)
R7335164
1-9/16”
(39mm)
R7335165
1-5/8”
(41mm)
R7335166
1-11/16”
(43mm)
R7363918
1-3/4”
(44mm)
R7335167
1-7/8”
(47mm)
R7335168
2”
(50mm)
R7335169
2-1/8”
(54mm)
R7335170
2-1/4”
(57mm)
R7335171
2-3/8”
2-1/2”
(60mm)
(63mm)
R7335172
R7335173
SIOUX WHITE - FINE
PRODUCT
NUMBER
DIAMETER
PRODUCT
NUMBER
DIAMETER
R7335276
R7363919
R7335277
R7335278
R7335324
R7363920
R7335325
R7335326
R7335327
R7363921
R7335328
R7335329
R7335330
R7335331
R7335332
R7335333
R7335334
PRODUCT
NUMBER
DIAMETER
1-1/8”
1/3/2016
1-1/4”
1-5/16”
1-3/8”
1/7/2016
1-1/2”
1-9/16”
1-5/8”
1/11/2016
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
(28mm)
(30mm)
(31mm)
(33mm)
(35mm)
(36mm)
(38mm)
(39mm)
(41mm)
(43mm)
(44mm)
(47mm)
(50mm)
(54mm)
(57mm)
(60mm)
(63mm)
R7335342
R7363910
R7335343
R7335344
R7335345
R7363911
R7335346
R7335355
R7335356
R7363912
R7335357
R7335358
R7335359
R7335360
R7335361
R7335362
R7335363
A FULL LINE OF SIOUX™ SEAT GRINDING WHEELS, PILOTS, AND
AIR DRIVERS ARE ALSO AVAILABLE. PLEASE SEE THE SIOUX™
TOOLS CATALOGUE FOR MORE INFORMATION. C&C VALVES,
INC. IS AN AUTHORIZED SIOUX™ TOOLS DISTRIBUTER.
19
SIOUX RUBY - FINE
GUIDE AND SEAT TOOLING
Seat Angle Cutter Kit
The Newest in Three Angle Ball Drive Tooling
1. Use existing seat grinding arbor
2. Available for most seat and guide machines
3. Uses dead pilot (Kwik-Way, Sioux, Neway, or Sunnen)
4. Popular with general automotive and high performance shops
5. Can also use Serdi carbide inserts
All Kits Contain:
(1) Carrying Box
(1) Morse Taper Adapter
(1) Ball Socket Assembly
(1) Ball Head
(1) Spring Bushing
Kit No.
Adapter
TS-503KW
TS-504KW
TS-503SX
TS-504SX
TS-503NEW
TS-504NEW
TS-503SUN
TS-504SUN
TS-503BP
(2) Springs
(3) Tool Holders
(4) Carbide Inserts
(1) Tool Setting Fixture
(1) Instructions
Ball Head
Pilots
TS-3M
TS-106KW
Kwik-Way
TS-4M
TS-106KW
Kwik-Way
TS-3M
TS-106SX
Sioux
TS-4M
TS-106SX
Sioux
TS-3M
TS-106NEW
Neway
TS-4M
TS-106NEW
Neway
TS-3M
TS-106SUN
Sunnen
TS-4M
TS-106SUN
Sunnen
TS-3B Specify Ball Head for Pilots
A. MORSE TAPER ADAPTERS
TS-3M
TS-4M
TS-3IDL
TS-3B
#3 Morse Taper Adapter
#4 Morse Taper Adapter
To adapt #3 Morse Taper to IDL Drive
Straight Shank Adapter for Bridgeport, etc.
B. BALL SOCKET ASSEMBLY
Ball Socket Assy. for TS-3M and TS-4M
TS-105
C. BALL HEAD
TS-106KW
TS-106SX
TS-106NEW
TS-106SUN
TS-106A
TS-106B
Ball Head for Kwik Way pilots
Ball Head for Sioux pilots
Ball Head for Neway pilots
Ball Head for Sunnen pilots
Lock Screws for tool holders (Hex Head)
Dowel Pins for Ball Head
D. SPRING BUSHING
TS-107KW
TS-107SX
Spring Bushing for Kwik Way
Spring Bushing for Sioux, Sunnen & Neway
E. SPRINGS
Springs (2 per kit)
TS-108
F. PILOTS (Not Included in Kits)
G. TOOL HOLDERS
TS-102
TS-102A
TS-103
TS-103A
TS-104
TS-104A
TS-109
Small Tool Holder (.975 - 1.195) & Screw
Radial Adjusting Screw for TS-102 (Hex Head)
Medium Tool Holder (1.195 - 1.600) & Screw
Large Tool Holder (1.550 - 2.450) & Screw
Torx® Insert Lock Screw
H. CARBIDE INSERTS (Standard in Kit)
R-1
R-2
R-3
R-4
Seat Angle & Width Top Angle & Overhang
45°-.059
30°-.071
30°-.051
15°-.039
45°-.051
30°-.039
70° Single Angle Tool for Throating
20
Throat Angle
60°
45°
60°
TOOL SETTING FIXTURE
TS-101
Tool Setting Fixture Assembly
TS-101A
Setting Fixture Body Only
TS-101B
Setting Fixture Pointer Only
TS-101C
Pointer Lock Screw Only
TS-101D
Arbor (Pilot) Lock Screw Only
MISCELLANEOUS
TS-100
Plastic Box for Kit
TX-8
T-8 Torx® Screwdriver
ADDITIONAL CARBIDE INSERTS FOR SEAT ANGLE CUTTER KITS
No.
R-1
R-2
R-3
R-4
R-5
R-6
R-7
R-8
R-9
R-10
R-11
R-12
R-13
R-14
R-15
R-16
R-17
R-18
R-19
R-20
R-21
R-22
R-23
R-24
R-25
R-26
R-27
R-28
R-29
R-30
R-31
R-32
R-33
R-34
R-35
Type
1
1
1
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
2
2
1
1
1
Seat Angle/Width Top Angle/Overhang Throat Angle
45°/.059
30°/.071
30°/.051
15°/.039
45°/.051
30°/.039
Straight 70° Cutter 70°
5mm Radius Cutter
45°/.059
37°/.071
45°/.079
30°/.087
45°/.051
30°/.079
45°/.039
35°/.063
45°/.039
35°/.063
45°/.039
30°/.047
45°/.063
30°/.039
45°/.055
30°/.039
45°/.071
30°/.063
45°/.075
30°/.079
30°/.071
15°/.055
30°/.075
15°/.079
30°/.098
15°/.079
30°/.039
20°/.063
30°/.059
20°/.118
30°/.059
0°/.079
30°/.079
15°/.055
45°/.039
35°/.063
Counterboring Cutter (90°)
30°/.110
0°/.079 60°
45°/.051
37°/.079 52°
45°/.051
30°/.079 60°
30°/.063
15°/.079 45°
45°/.063
30°/.079 60°
30°/.075
15°/.039 45°
Straight 30° Cutter
Straight 45° Cutter
37.5°/.071
20°/.047 52°
45°/.059
30°/.071 52°
20°/.098
11°/.079 60°
21
60°
45°
60°
70°
52°
60°
52°
60°
55°
60°
60°
60°
60°
60°
60°
60°
60°
52°
60°
60°
60°
52°
SERDI Profile #
15J45X60
13E30U45
13E45X60
70
R-5
15J45G52
20L45X60
13K45X52
10H45F60
10H45F55
10F45X60
16E45X60
14E45X60
18H45X60
19K45X60
18G30U60
19K30U60
25K30U60
10H30D52
15Q30D60
15K30R60
20G30U60
10H45F52
L-12
28K30R60
13K45G52
13K45X60
16K30U45
16K45X60
19E30U45
30
45
18F37.5D52
15J45X52
25B20B60
Seat Angle Cutter Kit (cont.)
CARBIDE BLADES for 3 angle cutting
No.
Seat Angle & Width
Top Angle & Overhang
Throat Angle
R-36
45/.039
25/.055
60
R-37
R-38
R-39
R-40
R-41
45/.039
45/.079
45/.098
20
30/.059
25/.071
25/.055
25/.055
15/.055
60
60
60
60
High Performance Carbide Inserts
Special carbide blades for REGIS three-angle tooling kits.
R-50
R-51
EXHAUST PROFILE
NARROW SEAT
EXHAUST PROFILE
WIDE SEAT
R-54
R-55
Open Bowls on Seats
Wide Seat, full profile insert.
special angles available Open pockets & finish seats.
R-52
R-53
EXHAUST PROFILE
NARROW SEAT
Radius insert for
unshrouding valves & blending to seat
area. (Cutting combustion chambers)
R-56
R-57
Narrow Seat, full profile insert.
Insert for small 4 valve auto head.
Open pockets & finish seats. Min.dia. .900” w/ no pilot obstruct. .965
22
Works in conjunction with existing TS-500 tooling.
Deluxe Ball Head
TS-106D Series
The same size range as the standard TS-106, this is a new design
that increases the stability of the cutting tool allowing less chatter
and providing a superior finish.
No.
Machine
TS-106D-SX
Sioux
TS-106D-NEW
Neway
TS-106D-KW
Kwik-Way
TS-106D-SUN
Sunnen
Large Ball Head
TS-1106 Series
Specially designed to create a larger cutting range, from 1.600” to
2.900”. This ball head allows for very heavy, chatter-free cuts such
as opening pockets for larger valves, and unshrouding combustion
chambers. Utilizes standard tool holders!
No.
Machine
TS-1106SX
Sioux
TS-1106NEW
Neway
TS-1106KW
Kwik-Way
TS-1106SUN
Sunnen
K-106S & W Series
Part No. Seat Ring Cutter Adapter
Simplifies tooling and reduces setup time when
cutting for seat rings on any seat and guide machine.
Use with TS-105 Ball Driver
Seat Cutter: 5/8” I.D.
(Kwik-Way, Peterson)
9/16” I.D.
(Winona)
Pilot Used
K-106SKW
K-106SNEW
K-106SSUN
K-106SSX
K-106W-KW
K-106W-NEW
K-106W-SUN
K-106W-SX
Kwik-Way 7/16”
Neway 3/8”
Sunnen .390”
Sioux .385”
Specify machine model.
Starrett Levels and Replacement Vials
No.
TSL-6
TSL-V
TSL8
RV-8
TSL-12
RV-12
23
Description
6” Complete Level
Replacement Vial
8” Complete Level
6” Replacement Vial
12” Complete Level
8” Replacement Vial
Three-Angle Tooling Ball Heads
VALVE & SPRING TOOLS & SUPPLIES
Power–Grip Lapping Stick
RV-1275
A QUALITY TOOL * SOUND DESIGN * BUILT TO LAST
POWR-GRIP valve grinder provides a positive system for holding valves during the
checking and lapping operations.
The spring-loaded vacuum pump, built into the handle, provides vacuum reserve for
long-lasting hold and serves a a leakage indicator to minimize unexpected release. A
single stroke attaches the cup firmly.
The cups are molded from tough, durable tread rubber, while the one-piece handle is
made of a space-age material resistant to the grease and corrosives normally associated with gasoline engine repair. The two sizes of cups provided in this set cover most
sizes of automotive valves in use today.
REPLACEMENT CUPS:
3/4” Cup
RV-1277
1” Cup
RV-1278
1-1/4” Cup
RV-1279
Clover Brand Grinding Compounds
Clover’s standard compound combines uniformly graded, sharp, hard, yet friable silicon carbide abrasive grains suspended in a high temperature grease mix binder.
This is the best combination for lapping of hardened steel, the most common lapping
job in the automotive after-market. Available in nine grades, the most popular being
A, C, D, and E. Unique duplex cans with equal amounts of A and E are very popular
with skilled mechanics as well as do-it-yourselfers.
Silicon Carbide Grease Mix
CLD-1
4 oz. duplex cans. Equal parts (2 oz. each) of coarse and fine, A&E grades
16 oz.
CL-163A
CL-162A
CL-161A
CL-16A
CL-16B
CL-16C
CL-16D
CL-16E
CL-16F
Grade
3A
2A
1A
A
B
C
D
E
F
Grit
500
400
320
280
240
220
180
120
100
Description
Extremely Fine
Extremely Fine
Very Fine
Fine
Medium Fine
Medium
Medium Coarse
Coarse
Extra Coarse
Clover grinding compound only available in 16 oz except duplex cans.
24
RL-700
- 2 fingers do the work
- Operates on 90 to 150 lbs. air pressure
- Parallel lift positively will not bend valve stem
- 3 sets of quick-change jaws included: RL-21, RL-22C, and RL-23
- Unit develops 3 times line pressure
- Inside frame dimensions are 9” x 101/2”
- Weighs only 61/2 pounds
EXTRA JAWS:
(New Quick Change)
No.
Description
RL-21
Small straight jaws for 7/8” to 1-7/8” diam.
RL-22C
Medium offset jaws for 1” to 2” diameters
RL-22CTS Thumb Screw
RL-23
Large straight jaws for 11/2” to 21/2” diam.
Rebuild Items:
No.
RL-700-1
RL-700-1-4
RL-700-3A
RL-700-3B
RL-700-SK
Description
Replacement Power Head (New)
Cylinder rubber washer
Exhaust valve complete
Intake valve complete
Seal kit for RL-700-1
Compressor Adapters
Adapters to fit 2-valve and 4-valve cylinder heads
Regis now has three adapters to fit OHC engines. The 32 mm
adapter is intended primarily for 2 valves/cylinder engines and
the 26 & 27 mm adapters work well on the smaller 4 valve engines.
No.
RL-26mm
RL-27mm
RL-32mm
Description
26 mm O.D. jaw adapter
Size
4” tall
3” tall
3” tall
Metal
Plastic
Plastic
VALVE KEEPER INSTALLERS
For valve stem diameters from 5.5mm to 3/8”
Easy, fast one step installation of your valve keepers.
Just put keepers in the end of the magnet barrel, put over valve stem and
push. It’s just that simple.
The magnet helps hold the keepers in place on the valves and prevents
dropping. If you do accidentally drop the keepers just use the magnet to
retrieve them. We have 5 sizes of valve keeper installers available for you
to cover most applications.
No.
VKI-5.5MM
VKI-6MM
VKI-8MM
VKI-343
VKI-375
25
Description
FOR VALVE STEM SIZES 5.5 MM
FOR VALVE STEM SIZES 6MM
FOR VALVE STEM SIZES 8MM
FOR VALVE STEM SIZES 11/32
FOR VALVE STEM SIZES 3/8
Air Power “C” Clamp Valve Lifters
RIMAC VALVE SPRING TESTER
This durable tester accurately measures new and used valve and
clutch springs, including heavy duty diesel applications up to 2”
diameter and 4-1/2” free length.
Ram travel ... 4 3/4"
Upper anvil ... 2 1/4" dia.
Lower anvil ... 3 1/4" dia.
Scale is in inches and centimeters & force is in pounds and
kilograms.
0-250 LBS
RIM0067
0-350 LBS
0-500 LBS
RIM0069
0-1000 LBS RIM0070
CALABRATED SPRING
RIM0068
RIM0095
Valve Stem Seal Removal Pliers
SP-92350
These unique pliers have been developed to remove the valve stem
seals used on most overhead camshaft engines. These pliers reach
around the valve stem into the confined area of the seal to grip it for
removal. Pliers feature “gripping” serrations in the tip allowing them to
grasp both original equipment and aftermarket seals, regardless of
their configuration. They are made from quality, heat-treated steel and
come with easy grip handles.
VALVE STEM SEAL EXTRACTOR
REMOVE EVEN THE STUBBORN VALVE STEM SEALS
RAPIDLY WITHOUT DAMAGING THE VALVE GUIDES OR
INJURING YOUR HANDS.
•
Valve stem seals removed easily from recessed spring
pockets.
•
Knurled hammer allows firm gripping with greasy hands.
•
Works on all known valve stem seal sizes from small to
large.
ERV94
FOR USE ON MOST CYLINDER HEADS WITH TWO OR FOUR
VALVES PER CYLINDER.
ERV94
FOR USE ON CYLINDER HEADS WITH SMALL VALVE STEM SIZES,
TYPICALLY WITH THREE OR MORE VALVES PER CYLINDER.
26
Refacing valves and the grinding of valve seats causes loss of
metal. This loss of metal results in the loss of proper spring pressure.
To restore the proper spring tension, one must replace the lost material by installing a Valve Spring Booster Shim under the spring.
Dura-Bond Spring Booster Shims are available in both case hardened High Performance and regular series. All shims are made from
prime quality cold rolled steel, and all shims meet or exceed OEM
specifications.
1000 SERIES
.015”
3000 SERIES
.030”
6000 SERIES
.060”
3000 SERIES
CUPPED SHIM
.030”
6000 SERIES
CUPPED SHIM
.060”
*ALSO AVAILABLE IN HARDENED SERIES– JUST ADD “HP” TO THE END OF PART NO.
27
DURA-BOND® VALVE SPRING BOOSTER SHIMS
Valve Refacer Wheels
Straight
Recessed
Dished
Offset
Plate Mounted
No.
Mfg. No.
Size
Shape
Grade
REK-629
33056
4x1x5/8
OFFSET
G.P. & STEL
REK-632
16371 (R)
4x1x5/8
OFFSET
REK-638
-
5x1x5/8
OFFSET
REK-674
20939
4x1-1/8x1/2
STRT. CUP
REK-877
34131
5x1x5/8
OFFSET
REK-1072
32944
6x3/4x2
RECESSED
Straight Cup
Grit
Flared Cup
Model No.
*
60
A,B,C, LW, M, MW,N, NW, NWO
V
STELLITE
80
V
G.P.
80
V
54
ALL EXCEPT #6 UNIVERAL
S
G.P.
60
P,PC,PCB,T,TO,TG
V
G.P.
46
#6 UNIVERSAL
V
70
ALL EXCEPT VL
S
BLACK & DECKER
KWIK–WAY
REK-184
010-0300-05
3x1-1/4x5/8
STRT. CUP
REK-548
010-0400-19
4x3/4x7/8
OFFSET
G.P.
70
4001,P
V
REK-720
010-0450-10
4-1/2x7/8x7/8
OFFSET
G.P.
70
CV,SK,KK,VC,SV,XC
V
REK-721
4-1/2x7/8x7/8
OFFSET
STELLITE
100 CV,SK,KK,VC,SV,XC
V
REK-772
7x1x7/8
OFFSET
TITANIUM
100 SVS
V
REK-773
010-0709-01
7x1x7/8
OFFSET
G.P.
90
SVS
V
RE-774
010-0509-01
5x7/8x7/8
OFFSET
G.P. FINISH
80
VS, EVS
V
REK-775
010-0507-07
5x7/8x7/8
OFFSET
G.P.
75
VS,EVS
V
REK-776
RUBY
5x7/8x7/8
OFFSET
STELLITE
80
VS,EVS
V
REK-900
010-0801-09
8x13/8x7/8
OFFSET
G.P.
80
VL
V
REK-901
010-0610-08
6x1-1/4x3/4
RECESSED
70
VK
S
REK-629
83
4x1x5/8
OFFSET
60
ALL EXCEPT BELOW
V
REK-901
010-0610-08
6x11/4x3/4
RECESSED
70
VL
S
REK-629
83
4x1x5/8
OFFSET
G.P. & STEL,
60
ALL EXCEPT BELOW
V
REK-630
-
4x1x5/8
OFFSET
G.P.
100 ALL EXCEPT BELOW
V
REK-632
RUBY
4x1X5/8
OFFSET
STELLITE
80
ALL EXCEPT BELOW
V
REK-638
78E
4x1x5/8
OFFSET
G.P.
80
ALL EXCEPT BELOW
V
REK-680
176
7x11/16x1-3/4
STRAIGHT
G.P.
70
680,956,2001,2075
V
REK-681
177
7x11/16x1-3/4
STRAIGHT
STELLITE
80
680,956,2001,2075
V
BAR7889R
RUBY
7x11/16x1-3/4
STRAIGHT
G.P./ STEL.
80
680,958,2001,2075
V
REK-647
-
4x1x5/8
STRT. CUP
54
ALL EXCEPT BELOW
S
REK-648
81
4x1x5/8
STRT CUP
60
ALL EXCEPT BELOW
S
REK-178
178
8x1-1/4x1-3/4
OFFSET
60
682
V
REK-181
181
7x1-1/4x1-3/4
STRT. CUP
54
682
S
REK-186
184 or 186
6x1-1/8x3/4
OFFSET
80
685L
V
REK-189
189
5x1-1/4x3/4
STRT. CUP
60
685L
S
G.P. & STEL
SIOUX
G.P.
G.P.
* REFERS TO USE OF WHEEL: S INDICATES STEM GRINDING… V INDICATES VALVE FACE GRINDING
28
Valve Refacer Wheels (Cont.)
No.
Mfg. No.
Size
Shape
Grade
Grit
Model No.
*
REK-84
14384
10x1-3/4x3
RECESSED
60
500
S
REK-85
14533
10x1-3/4x3
OFFSET
G.P.
60
500
V
REK-923
802003 (R)
12x5/8x3
STRAIGHT
STELLITE
80
CRW,VR-1000
V
REK-924
804781
8x2x2
STRAIGHT
46
VR-1000
S
REK-925
24078
12x5/8x3
STRAIGHT
60
CRW,VR-1000
V
REK-926
24079
10x1-1/4x3
RECESSED
54
CRW
S
REK-927
802373
7-7/8x2x3
PLATE
MTD.
24
VR-1000
S
REK-928
-
7x1-3/8x5/8
OFFSET
G.P.
100
VRW
V
REK-929
-
7x1-3/8x5/8
OFFSET
TITANIUM
100
VRW
V
REK-930
–
6x13/8x5/8
STRAIGHT
Cup
46
VRW
S
REK-770
75399
5x3/4x5/8
DISH
G.P.
80
E,Y,YW,X,XA
V
REK-647
40352
4x1x5/8
STRAIGHT
Cup
54
E,Y,YW,X,XA
S
Flare Cup
G.P.& Stel
80
All Models
V
G.P.
IDL
REK-8230
8230 White 8x1-1/4x1-1/2
REK-8231
–
8x1-1/4x1-1/2
Flare
Cup
54
All Models
S
REK-8232
8230Gray
8x1-1/4x1-1/2
Flare Cup
G.P.
80
All Models
V
8x1-1/4x1-1/2
Flare Cup
Titanium
100
All Models
V
REK-8233
SNAP ON & SKIL
REK-770 7556/VW80 5x3/4x5/8
Dish
G.P.
REK-771
VW80S
5x3/4x5/8
Dish
Stellite
REK-647
75571VR2M8
9
4x1x5/8
Straight
Cup
REK-646
72957
4x1x5/8
Plate Mntd.
80
All
V
100 All
V
54
AllExceptSkil-491
S
54
Skil-491
S
SUNNEN, TOBIN ARP, S&D
REK-880 ST-BEV-1 6x1-3/8x3/4
Flare Cup
G.P.
REK-881
S-F-2
5x1-3/8x3/4
Recessed
REK-880R
Red
6x1-3/8x3/4
Flare Cup
Stellite
70
VR-6500
V
60
VR-6500
S
60
VR-6500
V
K.O. LEE
REK-770
OV5GH60
REK-771 OV5GH80S
REK-647
RV4KH60
REK-646 RV4GQKMB
5x3/4x5/8
Dish
G.P.
80
All Models
V
5x3/4x5/8
Dish
Stellite
100
All Models
V
4x1x5/8
Recessed
54
K-500C&K-403C
S
4x1x5/8
Plate Mtd.
54
All Except K-500C&K-403C
S
HALL
REK-719 13-15247
4-1/2x1x5/8
OFFSET
G.P.
80
806
V
* REFERS TO USE OF WHEEL: S INDICATES STEM GRINDING… V INDICATES VALVE FACE GRINDING
29
WINONA/ VAN NORMAN
CRACK DETECTION TOOLS & SUPPLIES
CAN-SEAL Magnetic Powder
SEAL-LOCK Crack Detection Kit
SL19003
Find cracks fast in cylinder
heads, motor blocks,
crankshafts, welds, and
any ferro-magnetic part.
Fine grain CAN-SEAL magnetic powder obtains
the ultimate magnetic draw to indicate surface
cracks and abrasions.
CAN-SEAL GREY POWDER
The new Mag II probes are permanently magnetized,
and are so powerful that they can find sub-surface
cracks.
Kit includes a set of Mag II probes, crack detection
powder, powder dispenser, and a hi-impact carrying
case.
Weight
Product No.
5 lbs
ARCGMP-5
25 lbs
ARCGMP-25
50 lbs
ARCGMP-50
100 lbs
ARCGMP-100
CAN-SEAL YELLOW POWDER
Weight
Product No.
5 lbs
ARCYMP-5
25 lbs
ARCYMP-25
100 lbs
ARCYMP-100
Electric Crack Detection Kit
REK-1020E
Powder Blowers
100v, A/C, also
comes with optional DC
adapter for a 6
or 12 volt power
supply. Solid
state construction, comes with
1 pound magnetic detection powder, spray bulb,
and funnel, packed in a sturdy carrying case.
Rubber Powder Blower
REKPF-7
Atomizer Powder Blower
RE1020A
Squeeze bulb for RE1020A
RE1020A-2
KWIK-CHECK Crack Detection
For aluminum, ductile iron, stainless steel, etc… Non-fluorescent usage.
Product No.
Description
REKCK (Kit)
Dye, Remover, and Developer
REKCK-1
10oz Aerosol Penetrant Dye
REKCK-2
10oz Aerosol Dye Remover
REKCK-3
10oz Aerosol Developer
30
Using the patented SEALLOCK jig and an air drill,
SEAL-LOCK patterns of
tangent holes are drilled
straddling the crack at predetermined intervals.
SEAL-LOCKS of the appropriate size are inserted into the
patterns. Once in place, they
act like giant staples, keeping
the crack forever from reopening or propagating.
Balance of the crack between
SEAL-LOCKS is sealed with
SEALACE Taper Plugs, capable
of holding pressures in excess of
6000psi.
TAPER PLUGS & TAPS
Repair is peened with an air
hammer to develop full working strength and then ground
to provide a perfectly invisible finish.
SEAL-LOCKS
SEAL-LOCKS
#1
#3
#4
Alumalace
SEALACE Taper Plugs are the best you can use
to repair cracks in cast iron or aluminum cylinder
heads - motor blocks or any other automotive, marine
or industrial casting. For best results coat each plug
with SEAL-LOCK fluid weld.
are scientifically
engineered fasteners that are set
into the casting
cross the crack at
predetermined
spacings. Once set into the casting, they prevent further separation of the fracture and at
the same time restore full working strength to
the repaired area.
PRODUCT #
DESCRIPTION
SL14112-25
3/16" (3 LOBE) 25 PACK
SL14113-10
1/4" (THIN) 10 PACK
SL14113-100
1/4" (THIN) 100 PACK
SL14114-10
1/4" (THICK) 10 PACK
SL10111-100
#1 PLUGS /100 PK
SL10112-50
#3 PLUGS/50 PK
SL10113-100
#4 PLUGS/100 PK
SL14114-100
SL20111-100
ALUMALACE PLUGS/100PK
SL14115-1
3/8" (THIN) (SINGLE)
SL14115-50
3/8" (THIN) 50 PACK
SEALACE TITANIUM NITRIDE Taper Taps
SL14116-25
cut faster and last longer than competing brands.
They are harder than tungsten carbide and more
than twice as hard as high speed steel.
SL14117-25
3/16" (5 LOBE) 25 PACK
SL12111T
#1 TAP/TITANIUM NITRIDE
SL12112T
SL12113T
SL22111T
ALUMALACE TAP T/N
SEAL-LOCK JIGS
31
SL16113
3/16” JIG
SL16114
1/4” JIG
SL16116
3/8” JIG
CRACK REPAIR TOOLS & SUPPLIES
SEAL-LOCK® CRACK REPAIR SYSTEM
CRACK REPAIR TOOLS & SUPPLIES
SEAL-LOCK FLUID WELD
SEAL-LOCK GRIP
Repairs fine cracks,
pin holes and porosity
in cast iron or aluminum heads and
blocks. Fluid weld
can also be used to
seal injector tubes,
gaskets, freeze plugs,
etc.. Use to install
valve seat inserts,
valve guides, sleeves
and other pressed fit parts. This thermally conductive formula cross-links with metal to fill voids
and air pockets. Transfers heat to retain and cool
valve seat inserts, valve guides and cylinder
sleeves.
Use the fast cutting
GRIP to lock, seal,
and retain anything
from nuts and bolts to
valve guides and
valve seats to cylinder sleeves and
much more.
GRIP prevents leaks
and contamination
and stops loosening
from vibration. GRIP provides superior
strength and is high temperature resistant
Product #
Description
SL30610
10ml Bottle
Product #
Description
SL30650
50ml Bottle
SL30333
2 oz Bottle
SL30655
250ml Bottle
SL30334
8.5 oz Bottle
SEAL-ALL HEAD &
BLOCK SEALER
SEAL-TABS
SEAL-TABS are
the fastest, easiest, lowest cost
way to permanently seal & prevent leaks in cooling systems. Simply place a SEALTAB in the water
jacket of the cylinder head/engine block when water or coolant
is added; the dissolved SEAL-TAB will seal
any leaks.
No circulators or
special equipment
needed. Just pour
SEAL-ALL into the
water jacket to impregnate and seal
porosity, pin holes
and fine cracks in
cast iron and aluminum cylinder
heads and engine
blocks. SEAL-ALL cross-links with oxides (rust)
inside the water jacket to form a tough, flexible
lining that seals leaks and contains cooling system pressure.
Product #
Description
Product #
Description
SL30700-1
1 SEAL-TAB
SL30444
1 Quart
SL30700
10 SEAL-TABS
SL30445
1 Gallon
SL30701
36 SEAL-TABS
32
3M Roloc Bristle Discs
• Used to quickly remove
cut cork or paper gaskets
and for-in-place gasketing
materials prior to the assembling of power train
components.
•
The ideal tool to replace
scrapers, wire wheels
and chemical gasket
stripper.
•
Bristles ride over surface
cleaning contaminants
without gouging the surface.
Use with Roloc holder assembly
• Quick 1/2 turn on, 1/2 turn off
•
• For steel parts.
RL07480
2” Coarse (Brown)
25 per box
RL07524
2” 50 Grade (Green)
10 per box
RL07485
3” Coarse (Brown)
25 per box
RL07526
3” 50 Grade (Green)
10 per box
Scotch-Brite Multi-Flex
Abrasive Sheet Rolls
•
•
Three-M-ite Elek-Tro-Cut
Cloth Utility Rolls
Use for smoothing rough
spots, deburring and
cleaning metal surfaces.
Thin, ultra-flexible 4”x8” sheets
Great for quick scuffing of irregular
surfaces– wet or dry. Reusable.
RL07521
Roll of 60 Sheets
RL05008
General Purpose (Maroon)
1” X 50 Yards 120 Grade
Carbon Steel Hand Brushes
For general surface cleaning and preparation for refinishing. Used to
remove paint, rust scale, corrosion, and dirt.
BRB40
BRB44
BRB40
Solid Block, 6” brush length, 14” overall length
BRB44
Solid Wood Block, 5-1/4” brush length, 13/16”
bristle length, 10” overall length
33
SURFACE PREPARATION SUPPLIES
Scotch-Brite Roloc
Surface Conditioning Discs
HEAD SURFACING SUPPPLIES
SURFACE GRINDING SEGMENTS
Segments come in quantities of 8, 10, and 12.
PART #
MANUFACTURER
SIZE
MATERIAL
AASG-12
AMC
56 x 16 x 100mm
Silicone Carbide
CGBC-10B
BERCO
65 x 25 x 100mm
Silicone Carbide
KB-8
BERCO
65 x 25 x 85mm
Silicone Carbide
KB-35
KANSAS INSTR.
1-63/64” x 21/32” x 3-9/16”
Silicone Carbide
KBK-10
KWIK-WAY
65 x 20 x 100mm
Silicone Carbide
BAR8247-1
KWIK-WAY
65 x 20 x 100mm
GP
BAR8247R-1
KWIK-WAY
65 x 20 x 100mm
RUBY
KBS-8
PETERSON
3-1/8” x 13/16” x 3-1/8”
Silicone Carbide
KB-35
PETERSON
1-63/64” x 21/32” x 3-9/16”
Silicone Carbide
SC4-C8239-10B
ROBBI
59 x 21 x 120mm
Silicone Carbide
SC4-C8239-10B
ROGERS RMC
59 x 21 x 120mm
Silicone Carbide
KBS-10/KBS-8
STORM VULCAN-
3-1/8” x 13/16” x 3-1/8”
Silicone Carbide
CGBC-10B
SCLEDUM
65 x 25 x 100mm
Silicone Carbide
CGBC-10B
WINONA / VAN
NORMAN
65 x 25 x 100mm
Silicone Carbide
CGBC-10B
ZANROSSO
65 x 25 x 100mm
Silicone Carbide
BAR8234-1
ZANROSSO
65 x 25 x 100mm
GP
BAR8234R-1
ZANROSSO
65 x 25 x 100mm
RUBY
BAR8234SP-1
ZANROSSO
65 x 25 x 100mm
Salt & Pepper
HORIZONTAL GRINDING WHEELS
PRODUCT #
MANUFACTURER
SIZE
GRIT
REK-545
KWIK-WAY
12” x 3” x 1-1/2”
16
REK-545B
(Lempco)
14” x 3” x 1-1/2”
24
16” x 3” x 1-1/2”
24
REK-545BL
REK-48F
PETERSON
14” x 1-1/2” x 4”
30
REK-562
WINONA VN
14” x 2” x 2”
16
* OTHER WHEELS AVAILABLE BY SPECIAL ORDER– CONTACT US FOR MORE DETAILS
34
CBN - Cubic Boron Nitride Inserts. Cutter buttons for your CBN milling head. These inserts provide clean, fresh cuts on all shop work; aluminum alloy, cast iron and diesel heads.
Our inserts contain 85% - 95% C.B.N. content with Titanium Nitride Bond. Our competitors
could be as low as 55% C.B.N. content with inferior bond.
ROUND SINGLE SIDE
ROUND REVERSIBLE
Product
Number
Diameter
Thickness
Product
Number
Diameter
Thickness
SER1002
3/8”
.125
SER1005
3/8”
.125
SER1002B
3/8”
.1875
SER1006
3/8”
.1875
SER1002S
3/8”
.1875
SER1006S
3/8”
.1875
SER1003
1/2”
.125
SER1015
1/2”
.125
SER1004
1/2”
.1875
SER1016
1/2”
.1875
SER1004S
1/2”
.1875
SER1016S
1/2”
.1875
SER1007
1/4”
.070
SER1017
1/4”
.070
Polychystalline Inserts
(Aluminum Cutting)
Product
Number
Diameter
Thickness
REPCDS-12
1/2”
(Single Sided)
.128
REPCDS-38
3/8”
.128
REPCDS-25
1/4”
.070
Desmond Dressers for Surface Grinders
No.
REBB-10
REBB-14
REBB-17
REBB-17A
REBB-10L
REBB-18
RE5H
Machine Model
Storm RT-7Y, RT-17Y, 360A
Van Norman, Peterson
Peterson (Dry Grinder)
Berco Late Model 1200 & 1550
Kwik-Way, Lempco
885, 855-5,856,860
Berco Early Model 1200 & 1550
Description
Complete Assembly
Set of 14 loose cutters
Complete Assembly
Set of 8 cutters & 5 spacers
Complete Assembly
Set of 14 loose cutters
Set of 4 cutters & 2 spacers
35
HIGH QUALITY CBN & PCDS REPLACEMENT INSERTS
HEAD SURFACING BELTS
Select from three types of abrasives:
Silicon Carbide, Ceramic & Zirconia
Alumina/Aluminum Oxide.
Each belt is specially constructed with a high quality, heat resistant bond to keep the abrasive grains
anchored in place. The super-tough backing won’t
crack, tear or fray. Reversing the belt allows you to
increase its life up to 20 additional heads
PRODUCT #
DESCRIPTION
CERAMIC
HSB-1031-36
15"x127-1/2" x 36GR
SILICON CARBIDE
Guide to Abrasive Compounds
Silicon Carbide
36-40 Grit
High quality black
abrasive. Ideally suited
for cast iron, but can
resurface aluminum.
Light or no down pressure is recommended.
60-80 Grit
High quality black
abrasive. Designed
specifically for resurfacing aluminum due
to its finer grit. Down
pressure not recommended.
Ceramic
Zirconia Alumina
36-40 Grit
Premium quality abrasive. Perfectly uniform
ceramic grain. Longest
lasting belts. Designed
for heavy down pressure. For cast iron or
steel.
High quality abrasive.
Ideally suited for cast
iron, but can resurface
aluminum. Light or no
down pressure is recommended.
HSB-3000-40
14"x103" 40GR
HSB-3002-40
12"x 79" 40GR
HSB-3003-40
11-7/8" x 79" 40GR
HSB-3003-60
11-7/8" x 79" 60GR
HSB-3003-80
11-7/8" x 79" 80GR
HSB-3004-40
11-7/8"x91" 40GR
HSB-3004-60
11-7/8" x 91" 60GR
HSB-3005-40
12"x 89"SC 40GR
HSB-3006-40
14" x 107-1/4" 40GR
HSB-3006-60
14" x 107-1/4" 60GR
HSB-3007-40
11-7/8" x 89" 40GR
HSB-3007-60
11-7/8" x 89" 60GR
HSB-3010-40
14" x 103" 40GR
HSB-3010-60
14" x 103" 60GR
HSB-3041-40
11-1/4" X 76" 40GR
HSB-3041-60
11-1/4" X 76" 60GR
HSB-3055-40
14-1/2" x 99" 40GR
HSB-3055-60
14-1/2" x 99" 60GR
ZIRCONIA ALUMINA
Other sizes and types available
by special order
HSB-4001-36
14"x107"KW AZ HD
36GR
HSB-4031-36
15"x127-1/2" 36GR
PORTABLE POLISH BELTS
PRODUCT NO.
DESCRIPTION
AB1100-320-1
1" x 30" 320GR
PREMIUM ALUMINUM OXIDE MINERAL BONDED TO
A FLEXABLE COTTON CLOTH BACKING PROVIDING
QUALITY, PERFORMANCE, AND PRODUCTIVITY.
FOR GENERAL METAL WORK APPLICATIONS.
36
REAS-10
REAS-49
PART NO.
SLANT HEIGHT
BASE DIAM.
REASM-12
3-1/2”
MANDREL
REAS-10
3-1/2”
3”
TOP DIAM.
2”
REASM-12
REASM-50
PART NO.
DESCRIPTION
REAS-49
45° ABRASIVE CONE
REASM-50
45° MANDREL FOR AS-49
CYLINDER WASHING BRUSHES
Nylon fill brushes for efficient cleaning of cylinder walls
after honing. Use with detergent and warm/hot water.
Part No.
Size
BR10A312
3-1/2” DIAMETER
BR10A4
4” DIAMETER
BR10A412
4-1/2” DIAMETER
BR10A5
5” DIAMETER
BR10A512
5-1/2” DIAMETER
BR10A6
6” DIAMETER
FLEX HONE®
FOR CYLINDER BORES
STANDARD
HEAVY DUTY
Flex Hones are self-centering and self-aligning honing tools that produce a soft, evenly controlled
cutting action. The independently suspended abrasive globules self-compensate for wear and impart a consistent crosshatch for oil retention and instant ring seating. We stock many sizes and
grits, ready for delivery. Refer to your Brush Research catalogue or contact us for more information.
37
CYLINDER TOOLS AND SUPPLIES
Chamfering Cones & Mandrels
CYLINDER TOOLS & SUPPLIES
CYLINDER HONE STONES
Single-piece hone stone sets include two holders with stones and two holders with aluminum wipers to fit Sunnen AN series cylinder hones and other comparable honing units. Designed to be
used with honing oil.
SMALL SIZE RANGE
NUMBER
MFG. NO.
GRIT SIZE
RANGE
RESN-100
AN-100
70
2-3/4 TO 4-1/8
RESN-200*
AN-200
150
2-3/4 TO 4-1/8
RESN-300*
AN-300
220
2-3/4 TO 4-1/8
RESN-500*
AN-500
280
2-3/4 TO 4-1/8
RESN-400
N27-J87
400
2-3/4 TO 4-1/8
MM-33-C05
600
3-1/3 TO 4-1/8
RESN-400CB
LARGE SIZE RANGE
NUMBER
MFG. NO.
GRIT SIZE
RANGE
RESN-101
AN-101
70
3-1/2 TO 5-1/2
RESN-201*
AN-201
150
3-1/2 TO 5-1/2
RESN-301*
AN-301
220
3-1/2 TO 5-1/2
RESN-501*
AN-501
280
3-1/2 TO 5-1/2
RESN-401
N37-J87
400
3-1/2 TO 5-1/2
NN-40-C05
600
4 TO 5-1/2
RESN-401CB
FOR POWER HONES
FY SERIES STONES ARE 3” LONG AND CAN BE USED FOR BLIND HONING
NUMBER
MFG. NO.
GRIT SIZE
RANGE
RESN-102FY
AN-100-71
70
2-3/4 TO 4-1/8
RESN-202FY*
AN-200-71
150
2-3/4 TO 4-1/8
RESN-302FY*
AN-300-71
220
2-3/4 TO 4-1/8
RESN-104FY
AN-101-71
70
3-1/2 TO 5-1/2
RESN-204FY*
AN-201-71
150
3-1/2 TO 5-1/2
RESN-304FY*
AN-301-71
220
3-1/2 TO 5-1/2
ALUMINUM OXIDE HONE STONES
ALL STONE SETS MARKED WITH AN (*) ARE AVAILABLE IN ALUM. OXIDE GRITJUST ADD “AX” TO THE END OF THE PART NUMBER WHEN ORDERING.
38
FOR ACCURATE, FAST STOCK REMOVAL FOR ALL CYLINDER HONING APPLICATIONS. SIZE RANGE EXTENDS FROM 2-3/4” TO 4-1/8”. INCLUDES A 1/2”
DRIVE SHAFT (7/16-14 NC THREAD)- 12” LONG. USE WITH A DRILL FOR MANUAL HONING. 220 GRIT HONE SET AND STORAGE CASE INCLUDED.
SMALL CYLINDER HONE
RERSI-215
At last, a precision built hone for small cylinders 13/4” to 23/4”. Stones are 31/2”
long, assuring total accuracy. Three sets of stones (included with RSI-215), cover the
full range of sizes, are easily changed, and available in four different grits. RSI-215
comes complete with three medium grit (180) stone sets and a sturdy storage case.
Replacement stone & wiper sets avail. in 80, 180, & 280 grit or for aluminum.
ULTRA-FLEX FINISH BRUSHES (Plateau Brushes)
Nylon bristles are impregnated with a gentle abrasive, giving a fine, mirror finish to
valve guides, cylinders and lifter bores. A finishing brush does not enlarge bore diameter, but removes tiny peaks and scuffs left after honing.
Valve guides - Removes burrs after reaming to prevent premature valve guide and
stem wear.
Cylinder Bores - Ideal for racing and high-performance applications, also for new engines that require low-tension rings. Fast ring seal for shorter break-in time; and better
oil control and low emissions.
Lifter Bores - De-burr and de-glaze bores. Will not catch in oil passages. Gives a highmicron finish.
Part #
For Hole Dia.
Brush Dia.
Brush Length
Overall Length
RER-5.5
RER-6.4
5.5mm (7/32”)
6.4mm (1/4”)
.241”
.275”
1”
1-1/4”
4”
4-1/2”
RER-7
RER-8
RER-9
RER-10
RER-11
RER-12
RER-13
RER-14
RER-16
RER-17.5
RER-19
RER-20.5
RER-125
RER-200
RER-250
RER-300
RER-350
RER-400
RER-450
RER-500
7mm (9/32”)
8mm (5/16”)
9mm (11/32”)
10mm (3/8”)
11mm (7/16”)
12mm (15/32)
13mm (1/2”)
14mm (9/16”)
16mm (5/8”)
17.5mm (11/16”)
19mm (3/4”)
20.5mm (13/16”)
22-25mm (7/8” - 1”)
32-45mm (1-1/4” - 1-3/4”)
45-57mm (1-3/4” - 2/1/4”)
57-70mm (2-1/4” - 2-3/4”)
70-82mm (2-3/4” - 3-1/4”)
76-89mm (3” - 3-1/2”)
89-102mm (3-1/2” - 4”)
102-114mm (4” - 4-1/2”)
.309”
.343”
.378”
.413”
.481”
.516”
.550”
.618”
.688”
.756”
.825”
.893”
1.25”
2”
2-1/2”
3”
3-1/4”
4”
4.5”
5”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
2”
2”
2”
2”
2”
4”
4”
5”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
5”
5”
5”
5”
5”
6”
10”
10”
10”
10”
10”
14”
14”
14”
39
CYLINDER TOOLS & SUPPLIES
HEAVY DUTY CYLINDER HONE
R7381968
CYLINDER BORING SUPPLIES
BORING BAR CUTTERS
PETERSON BERCO
NO.
MODEL
DIAMETER
LENGTH
REKL-31
ACP-151-A, ACP-151-BL, SCP-151-P
10MM
1-1/4”
REKL-43
ACP-151-A, ACP-151-BL, SCP-151-P
10MM
1-3/4”
REKL-31
ROTTLER TOOL HOLDERS W/ REPLACEABLE TIPS
RERO-1171
MEDIUM
2-5/16”
3.450-4.500
RERO-1172
LONG
2-3/4”
4.450-5.250
KW-1120B
KW-1131B
RERO-1172
CARBIDE REPLACE. BIT FOR RERO-1172
TITANIUM REPLACE BIT FOR RERO-1171
ROTTLER (DIAMETER .342)
RERO-1
NO.
MAKE
LENGTH
RERO-1-1-0/4
ROTLER
1-1/4”
RERO-1-1-7/16”
ROTLER
1-7/16”
RERO-1-1-3/4”
ROTLER
1-3/4”
RERO-1C
ROTLER (CUT-OFF)
1-3/4”
KWIK-WAY (DIAMETER .312)
REKW-R & REKW-F
NO.
DESCRIPTION
BAR NO.
REKW-R
1-1/8” BIT
FS-FR-FW-FT-FN-FL
REKW-F
1-1/8” BIT
RS-FR-FW-FT-FN-FL
REKW-C
CUT-OFF BIT
ALL BARS AFTER SER. #1700
REKW-FN
45° OFFSET TOOL FL-12258
FN-FL (EBF, UBF FIXTURE)
REKW-FN-60
60° OFFSET TOOL
FN-FL (EBF, UBF FIXTURE)
VAN NORMAN
REV-100
REVS-1
REV-360
REV-41
REV-206
NO.
MFG. NO.
BAR NO.
REVS-0
777-179
777S,944S,777S4
REVS-2
777-256
777S4 (HARD SLEEVES)
REVS-3
SLEEVE CUT-OFF
777S,944S,777S4
REV-100
900-209
777,900,905,944,965
REV-360
999-59
999,888
REV-360C
SLEEVE CUT-OFF
999,888
REV-41
905-41
777 (LONG)
REV-41C
SLEEVE CUT-OFF
777 (LONG)
REV-206
905-206
777 (SHORT)
REV-206C
SLEEVE CUT-OFF
777 (SHORT)
40
REK-177H
NO.
DESCRIPTION
MFG. NO.
BAR NO.
FOR USE WITH:
REK-177H
SHORT
777-7177
777S,777S4
VS-1,VS-2,VS-3
REK-178H
LONG
777-7178
777S,777S4
VS-1,VS-2,VS-3
REK-214H
SHORT
944-7214
944S
VS-1,VS-2,VS-3
REK-215H
LONG
944-7215
944S
VS-1,VS-2,VS-3
REV-34
SHORT
800-7034
777,900,905,965
V-100
REV-22
LONG
905-7022
777,900,905,965
V-100
A
B
C
D
No.
Size
Length
KA
9/32”
11/32”
TOOL HOLDER ADJUSTING SCREWS
No.
Size
Length
No.
Size
KAA
9/32”
19/16”
KAAA
Length
9/32”
2”
KWIK-WAY BORING BAR CUTTERS W/ REPLACE. TIPS
REF.
PART NUMBER
MACHINE MODEL
A
REKW-1116
FL,FN,FT,F-SHORT,FR,FS LONG 2-9/16”
B
REKW-1117
FL MEDIUM,FN,FT,F LONG
C
REKW-8002
FN/ FT/ F 2-21/32” MIN. BORE 3.375”
D
REKW-8003
FL 3” MIN. BORE 3.750”
PART NUMBER
DESCRIPTION
REKW-1120
TITANIUM REPLACE. BIT FOR REWK-1116
REKW-1131
CARBIDE REPLACE. BIT FOR REKW-1117
REKW-8101
TITANIUM REPLACE. BIT FORREKW-8002, 8003
REKW-8102
CARBIDE REPLACE BIT FOR KW-8002, 8003
3”
DIAMOND LAPS
PART NO.
MAKE
MODEL
RERPO
ROTTLER
D&F SERIES (1-3/4” DIAM.)
RENFP
VAN NORMAN
777,777S,777S4
RENSP
VAN NORMAN
900,905,943,944,944S,965
REKP
KWIK-WAY
ALL BARS
RETACP
TOBIN ARP
ALL BARS (CUP TYPES)
41
CYLINDER BORING SUPPLIES
VAN NORMAN TOOL HOLDERS
REK-178H
PISTON PIN & CONN ROD TOOLING
Piston Pin Extractor Kit
RE1029
Designed to remove piston pins safely and quickly. Use with any shop
press. Made for universal use and can be altered to fit virtually any
piston. Fixtures can be purchased separately and can be changed to
fit a particular application. Made of high quality steel.
PARTS AND FIXTURES
NO.
DESCRIPTION
NO.
DESCRIPTION
RE1029A
#0 FIXTURE FOR .800 PINS
RE1029H
.760 DRIFT PIN
RE1029B
#1 FIXTURE FOR .950 PINS
RE1029J
.812 DRIFT PIN
RE1029C
#2 FIXTURE FOR 1.010 PINS
RE1029K
.875 DRIFT PIN
RE1029D
RE1029L
1.000 DRIFT PIN
RE1029E
RE1029M
TAPPED HANDLE
RE1029F
#5 FIXTUR FOR .865 PINS
RE1029N
THREADED ROD
RE1029G
BASE BLOCK
RE1029P
THREADED ADAPTER
ROD HONING STONES
(FOR SUNNEN STYLE MANDRELS)
RERS-6
CR MANDRELS
REKC-50B
RERH-10
MFG. NO
GRADE
RERH-10
CR-10
COARSE
100
RERH-12
CR-12
MEDIUM
220
RERH-14
CR-14
FINE
280
RERH-2
CR-2 (small)
MEDIUM
220
REKC-40D
CR-40D
SHOE
REKC-50B
CR-50B
SHOE
REKC-50D
CR-50D
SHOE
SL720/SL2300 MANDRELS
RERS-6
SL5
ROUGHING
RERS-8
SL7
GEN. PURPOSE
RERS-14
SL13
FINISHING
RERK-6
KL5
ROUGHING
RERK-8
KL7
GEN. PURPOSE
RERK-14
KL13
FINISHING
RERK-15
KL14
FINISHING
RERM-6
ML5
ROUGHING
RERM-8
ML7
GEN. PURPOSE
RERM-14
ML13
FINISHING
KL MANDRELS
RERK-6
ML MANDRELS
RERM-6
GRIT
42
PL MANDRELS
RERP-6
MFG. NO
GRADE
GRIT
RERP-6
PL5
ROUGHING
RERP-8
PL7
GEN. PURPOSE
RERP-14
PL13
FINISHING
RERU-6
UL5
ROUGHING
RERU-8
UL7
GEN. PURPOST
RERU-14
UL13
FINISHING
4UL MANDRELS
RERU-6
CONNECTING ROD HONING MANDRELS
For most popular honing machines:
Sunnen, Winona Van Norman, Kwik-Way, Storm Vulcan, RMC, Superior & DCM Tech
CONNECTING ROD HONING MANDREL SET
For Con - Rod Reconditioning (For Pin Fitting)
Important: When ordering complete individual unit, order:
Mandrel, Adapter, Stones, Shoe and Truing Sleeve.
For convenient mandrel storage order D - SL - 30 Mandrel Stand (not included in set).
D -LBN - 64 MANDREL SET Range: .744” to
1.250” (18.8mm - 31.7mm)
These lifetime steel honing mandrels for Press-Fit Rods, Bushings and Pin Fitting come
complete with Bronze Guide Shoes and Roughing and Finishing stones.
Mandrels
Range
Includes D - K20 - W Wedge & Shoe
Adapter
With Tension
Plate & Clip
Stones
Rough
Finish
Bronze
Guide Shoe
Truing
Sleeve
1 ea. Per Mandrel
D - KL - 744
.744” - .771” (18.9 - 19.7mm)
D - AK20
D - KL - 5
D - KL - 13
D - UA - B
D - S - 744
D - KL - 838
.838” - .868” (21.3 - 22mm)
D - AK20
D - KL - 5
D - KL - 13
D - UB - B
D - S - 838
D - KL - 900
.900” - .930” (22.9 - 23.6mm)
D - AK20
D - KL - 5
D - KL - 13
D - UC - B
D - S - 900
D - KL - 931
.931” - .961” (23.6 - 24.4mm)
D - AK20
D - KL - 5
D - KL - 13
D - UC - B
D - S - 931
D - KL - 962
.962” - .993” 24.4 - 25.2mm)
D - AK20
D - KL - 5
D - KL - 13
D - UC - B
D - S - 962
D - KL - 1000
.994” - 1.062” (25.2 - 27.0mm)
D - AK20
D - KL - 5
D - KL - 13
D - UD - B
D - S - 1000
D - KL - 1062
1.056” - 1.125” (26.8 - 28.6mm)
D - AK20
D - KL - 5
D - KL - 13
D - UD - B
D - S - 1062
D - KL - 1125
1.119” - 1.187” 28.4 - 30.1mm)
D - AK20
D - KL - 5
D - KL - 13
D - UE - B
D - S - 1125
D - KL - 1187
1.181” - 1.250” (30.0 - 31.7mm)
D - AK20
D - KL - 5
D - KL - 13
D - UE - B
D - S - 1187
MANDRELS COMPLETELY ASSEMBLED FOR YOUR CONVENIENCE.
43
ROD HONING STONES CONTINUED...
CONNECTING ROD HONING MANDRELS
For most popular honing machines:
Sunnen, Winona Van Norman, Kwik-Way, Storm Vulcan, RMC, Superior & DCM Tech
The Large End Mandrels are made of aircraft quality aluminum with wear-resistant
Steel inserts offering a lifetime of use. The decrease in weight of these normally
Heavy tools, prolongs the spindle life of your machine and makes for easier handling.
Guide Shoes and Honing Stones are interchangeable with Sunnen.
Danmar Mandrels reduce your cost by up to 15% from brand “x”.
CONNECTING ROD HONING MANDREL SET
For Con - Rod Reconditioning (Journal End)
D -LBN - 62 MANDREL SET Range: 1.900” to
2.900” (49mm - 73mm) (Set also includes
D - SL - 38 Mandrel Stand.)
Mandrels
Range
Wedge
D - CR - 1900
1.900” - 2.100”
(48.33 - 53.3mm)
D - CR - 2100
Wedge Plates
Bronze
Guide Shoes
Stones
Small
Large
D - CR - 100
D - CR - 110
D - CR - 120
D - CR - 50 B
D - CR - 12
2.100” - 2.300”
(53.3 - 58.4mm)
D - CR - 100
D - CR - 110
D - CR - 120
D - CR - 50 B
D - CR - 12
D - CR - 2300
2.300” - 2.500”
(58.4 - 63.5mm)
D - CR - 100
D - CR - 110
D - CR - 120
D - CR - 50 B
D - CR - 12
D - CR - 2500
2.500” - 2.700”
(63.5 - 68.6mm)
D - CR - 100
D - CR - 110
D - CR - 120
D - CR - 50 B
D - CR - 12
D - CR - 2700
2.700” - 2.900”
(68.6 - 73.7mm)
D - CR - 200
D - CR - 110
D - CR - 120
D - CR - 50 B
D - CR - 12
Order by sets or individual units.
Each Mandrel Unit comes completely assembled with wedge, wedge plates, bronze guide shoes and
stone.
This set of 5 complete honing mandrels including convenient storage stand will cover most popular
cars and trucks and are built for a lifetime of use.
Other Mandrels covering other size ranges are available by special order.
Replacement Parts:
Tension Blocks
Shoe Clamps
(Includes 4 Clamps & Screws)
D-LN-1337A
D-CR-45A
44
DBCT1 CAM BEARING TOOL KIT
A fast, simple, economical cam tool that eliminates hundreds of
separate, costly driving plugs with four expanding mandrels.
CONTAINS:
PART NO.
DESCRIPTION
DB1B
5” DRIVING BAR
DB3B
36: DRIVING BAR WITH CAP
DB1C
GUIDE CONE
DB3E
1-7/32” EXPANDER WITH STUD
DB4E
1-5/8” EXPANDER WITH STUD
DB5W
1.370 METAL WASHER
DB6W
1.682 METAL WASHER
DB7W
1.875 METAL WASHER
DB8W
2.250 METAL WASHER
DB5M
1.370 TO 1.682 EXPANDING MANDREL W/ DB5NS SLEEVE
DB6M
DB7M
DB8M
OPTIONAL & REPLACEMENT PARTS
DB2B
24” DRIVING BAR
DB1-CAP
CAP ONLY FOR 24” & 36” BARS
DB1S
THREADED STUD FOR EXPANDER
DB5NS
1.370 RUBBER MANDREL SLEEVE
DB6NS
DB7NS
DB8NS
We stock a full range of Dura-Bond Cam Bearings and Valve Seats.
Refer to you Dura-Bond Catalogue or contact us for more information.
45
CAM BEARING TOOLS & SUPPLIES
CAM BEARING TOOL
CRANKSHAFT TOOLS & SUPPLIES
PART # E-100
CRANKSHAFT POLISHER
C/W 5 belts 1” x 64-1/2” x 320 grit
SPECIFICATIONS:
Motor: Baldor 10,000 rpm - 1/2 hp
6 amp - Cont. Duty 110 Volts
Overall Length: 30”
Weight: 13.5 lbs
Belt Speed: 4000 SFPM (Surface Speed Per Min.)
Belts: 1/2” to 1” wide - 60” to 64” long
FEATURES:
Insulated field system in motor
Insulated switch block
Rugged steel frame construction
Flanged CNC rollers with tool bearings - stop
belt run-off
• Top mounted aluminum guard
• Durable red powder coated frame
• 12 foot, 3 conductor power cord
•
•
•
•
NO ASSEMBLY REQUIRED
Also available with a 220 Volt 50 HZ Motor
PART #
ELECTRIC UNITS
PART #
AIR UNITS
E-100
1/2hp 1” belt - 60” to 64” long
A-100
3/4hp 1” belt - 60” to 64” long
E-200
1/2hp 2” belt - 60” to 64” long
A-200
3/4hp 2” belt - 60” to 64” long
E-300
1hp 2” belt - 60” to 64” long
A-300
1 1/2hp 2” belt - 60” to 64” long
3M SCOTCH-BRITE POLISHING BELTS
• VERY FINE FINISH
• ALUMINUM OXIDE
• EXPOSES FRESH ABRASIVE MINERAL TO
THE CRANKSHAFT WORK SURFACE AS
THE BELT WEARS.
• SIDES WILL CONFORM TO JOURNAL RADII
• CONSISTENT POLISH
PART NO.
DESCRIPTION
CPB5006-A-VFN
60” x 1/2” BELT
BLUE
CPB5007-A-VFN
60” x 3/4” BELT
BLUE
CPB5010-A-VFN
64” x 3/4” BELT
BLUE
CPB5010-S-SFN
64” x 3/4” BELT
GREY
CPB5015-A-VFN
70” x 3/4” BELT
BLUE
CPB5046-V-VFN
74” x 3/4” BELT
BLUE
CPB5032-A-VFN
91” x 3/4” BELT
BLUE
46
PREMIUM CLOTH-BACKED BONDED ABRASIVE BELTS:
STANDARD: ALUMIUM OXIDE ABRASIVE BELTS
J-FLEX: ULTRA-LIGHT, ULTRA-FLEXIBLE BELTS
CORK: “SUPER POLISH” MAIN JOURNALS W/O SCARRING
SOLD IN PACKS OF 10
PRODUCT #
DESCRIPTION
PRODUCT #
DESCRIPTION
CPB1022
72"x 2" (320GR)
STANDARD BELTS– 10 BELTS PER PACK
CPB1004
55-3/4" x 1" (320 & 400GR)
CPB1025
77"x3/4" (320GR)
CPB1005
60"x1/2" (240, 320 & 400GR)
CPB1026
77"x1" (320 & 400GR)
CPB1007
60" x 3/4" (220, 320 & 400GR)
CPB1032
91"x3/4" (320 & 400GR)
CPB1008
60"x1" (240, 320 & 400GR)
CPB1033
91"x1" (320 & 400GR)
CPB1009
64"x 1/2" (320GR)
CPB1039
116"x1" (80GR)
CPB1010
64"x3/4" (240, 320 & 400GR)
CPB1011
64"x1" (180, 240, 320, 400 &
600GR)
CPB1011A
64"x7/8" (320 & 400GR)
CPB1013
64"x 1-1/2" (180, 320, & 600GR)
CPB1015
70"x3/4" (320 & 400GR)
CPB1016
70" x 1" (220, 240, 320 & 400GR)
CPB1018
64-1/2" x 1" (220, 320 & 400GR)
CPB1019
64-1/2" x 3/4" (220, 320 & 400GR)
CPB1021
J-FLEX– 10 BELTS PER PACK
CPB2010
64"x3/4"J-FLX BELT (320GR)
CORK BELTS– 5 BELTS PER PACK
CPB3010
64"x3/4"CORK BELT (400 &
600GR)
CPB3011
64"x1"CORK BELT (320, 400 &
600GR)
CPB3024
77"x5/8"CORK BELT (400GR)
CPB3032
CPB3032A
CPB3033
91" x 1" CORK POL BELT (320 &
600GR)
72"x1" (240, 320 & 400GR)
3M Trizact Belts
These belts are designed with a new abrasive that will outlast conventional belts by three to four times
(depending on use). Belts wear evenly producing a consistent cut rate with an exceptionally fine finish.
The coating on the belt darkens to indicate replacement time. These belts have no grit sizes - the finish
will be approximately the same as equivalent grit sizes: A16 = 320 - 400GR; A30 = 400 - 500GR
SOLD IN PACKS OF 10
PRODUCT #
DESCRIPTION
PRODUCT #
DESCRIPTION
PRODUCT #
DESCRIPTION
CPB4006-A16
60"x 1/2"
CPB4011-A16
64"x1"
CPB4020-A30
64"x2"
CPB4006-A30
60"x 1/2"
CPB4011-A30
64"x1"
CPB4032-A16
91"x3/4"
CPB4009-A16
64"x 1/2"
CPB4015-A16
70"x3/4"
CPB4032-A30
91"x3/4"
CPB4009-A30
64"x 1/2"
CPB4015-A30
70"x 3/4"
CPB4033-A16
91"x1"
CPB4010-A16
64"x3/4"
CPB4016-A16
70"x 1"
CPB4033-A30
91"x1"
CPB4010-A30
64"x3/4"
CPB4016-A30
70"x 1"
47
CRANKSHAFT POLISHING BELTS
CRANKSHAFT GRINDING
WHEELS– 18” to 22”
1
5
7
21
WHEEL
TYPES
DIMENSIONS
MACHINE/MODEL
OTHER DIMENSION
PRODUCT #
TYPE
18 x 3/4 x 3
18 x 7/8 x 3
18 x 15/16 x 3
18 x 1 x 3
18 x 1-1/16 x 3
18 x 1-1/8 x 3
18 x 1-3/16 x 3
18 x 1-1/4 x 3
18 x 1-3/8 x 3
18 x 1-1/2 x 3
18 x 1-5/8 x 3
18 x 1-11/16 x 3
18 x 1-3/4 x 3
18 x 1-7/8 x 3
18 x 1-15/16 x 3
18 x 2 x 3
20 x 3/4 x 3
20 x 7/8 x 3
20 x 15/16 x 3
20 x 1 x 3
20 x 1-1/16 x 3
Storm-Vulcan 14, 15
Straight
Straight
Straight
Straight
Rec. 1S 6-1/2 x 1/16
Rec. 1S 6-1/2 x 1/8
Rec. 1S 6-1/2 x 3/16
Rec. 1S 6-1/2 x 1/4
Rec. 1S 6-1/2 x 3/8
Rec. 1S 6-1/2 x 1/2
Rec. 1S 6-1/2 x 5/8
Rec. 1S 6-1/2 x 11/16
Rec. 1S 6-1/2 x 3/4
Rec. 1S 6-1/2 x 7/8
Rec. 1S 6-1/2 x 15/16
Rec. 1S 6-1/2 x 1
Straight
Straight
Straight
Straight
Rec. 1S 7-1/4 x 1/16
RE335187
RE335188
RE335189
RE337308
RE335190
RE335191
RE335192
RE335193
RE335194
RE335196
RE335197
RE335198
RE335199
RE335200
RE346092
RE335201
RE335210
RE335211
RE335212
RE335213
RE335214
1
1
1
1
5
5
5
5
5
5
5
5
5
5
5
5
1
1
1
1
5
Rec. 1S 7-1/4 x 1/8
Rec. 1S 7-1/4 x 3/16
Rec. 1S 7-1/4 x 1/4
Rec. 1S 7-1/4 x 3/8
RE335215
RE335216
RE335217
RE335218
5
5
5
5
Rec. 1S 7-1/4 x 7/16
Rec. 1S 7-1/4 x 1/2
Rec. 1S 7-1/4 x 5/8
Rec. 1S 7-1/4 x 11/16
Rec. 1S 7-1/4 x 3/4
Rec. 1S 7-1/4 x 7/8
Rec. 1S 7-1/4 x 15/16
Rec. 1S 7-1/4 x 1
Straight
Straight
Straight
Straight
Rec. 1S 7-1/2 x 1/16
Rec. 1S 7-1/2 x 1/8
Rec. 1S 7-1/2 x 3/16
Rec. 1S 7-1/2 x 1/4
Rec. 1S 7-1/2 x 3/8
Rec. 1S 7-1/2 x 7/16
Rec. 1S 7-1/2 x 1/2
Rec. 1S 7-1/2 x 5/8
Rec. 1S 7-1/2 x 11/16
Rec. 1S 7-1/2 x 3/4
Rec. 1S 7-1/2 x 7/8
Rec. 1S 7-1/2 x 15/16
Rec. 1S 7-1/2 x 1
RE335219
RE335220
RE335221
RE335222
RE335223
RE335224
RE335225
RE335226
RE335237
RE335238
RE337309
RE337310
RE335239
RE335240
RE335241
RE335242
RE335243
RE335244
RE335245
RE335246
RE335247
RE335248
RE335249
RE335250
RE335251
5
5
5
5
5
5
5
5
1
1
1
1
5
5
5
5
5
5
5
5
5
5
5
5
5
Storm-Vulcan
15 Special 1550, 1648
20 x 1-1/8 x 3
20 x 1-3/16 x 3
20 x 1-1/4 x 3
20 x 1-3/8 x 3
20 x 1-7/16 x 3
20 x 1-1/2 x 3
20 x 1-5/8 x 3
20 x 1-11/16 x 3
20 x 1-3/4 x 3
20 x 1-7/8 x 3
20 x 1-15/16 x 3
20 x 2 x 3
22 x 3/4 x 5
22 x 7/8 x 5
22 x 15/16 x 5
22 x 1 x 5
22 x 1-1/16 x 5
22 x 1-1/8 x 5
22 x 1-3/16 x 5
22 x 1-1/4 x 5
22 x 1-3/8 x 5
22 x 1-7/16 x 5
22 x 1-1/2 x 5
22 x 1-5/8 x 5
22 x 1-11/16 x 5
22 x 1-3/4 x 5
22 x 1-7/8 x 5
22 x 1-15/16 x 5
22 x 2 x 5
Storm-Vulcan
Storm-Vulcan 15A
To Serial #593
AMC Machine
48
1
5
7
21
WHEEL
TYPES
DIMENSIONS
MACHINE/MODEL
OTHER DIMENSION
PRODUCT #
TYPE
24 x 3/4 x 5
24 x 7/8 x 5
24 x 15/16 x 5
24 x 1 x 5
24 x 1-1/16 x 5
24 x 1-1/8 x 5
24 x 1-3/16 x 5
Storm-Vulcan 15A
15A Special
15A Special
15C and 1860
RMC/Robbi Rex 1200
Scledum 200
Straight
Straight
Straight
Straight
Straight
Rec. 1S 8-1/2 x 1/8
Rec. 1S 8-1/2 x 1/8
RE335448
RE335449
RE335450
RE337311
RE335452
RE335453
RE335454
1
1
1
1
1
5
5
24 x 1-1/4 x 5
24 x 1-3/8 x 5
24 x 1-7/16 x 5
24 x 1-1/2 x 5
24 x 1-5/8 x 5
24 x 1-11/16 x 5
24 x 1-3/4 x 5
24 x 1-7/8 x 5
24 x 1-7/8 x 5
24 x 1-15/16 x 5
24 x 2 x 5
24 x 3/4 x 8
24 x 15/16 x 8
24 x 7/8 x 8
24 x 1 x 8
24 x 1-1/8 x 8
24 x 1-1/4 x 8
24 x 2 x 8
26 x 3/4 x 8
26 x 3/4 x 8
26 x 7/8 x 8
26 x 7/8 x 8
26 x 15/16 x 8
26 x 15/16 x 8
26 x 1 x 8
26 x 1 x 8
26 x 1-1/16 x 8
26 x 1-1/8 x 8
26 x 1-3/16 x 8
26 x 1-1/4 x 8
26 x 1-1/4 x 8
26 x 1-1/4 x 8
26 x 1-3/8 x 8
26 x 1-7/16 x 8
26 x 1-1/2 x 8
26 x 1-5/8 x 8
26 x 1-11/16 x 8
26 x 1-3/4 x 8
26 x 1-7/8 x 8
26 x 1-15/16 x 8
26 x 2 x 8
Storm-Vulcan 15A
15A Special
15A Special
15C and 1860
RMC/Robbi Rex 1200
Scledum 200
Rec. 1S 8-1/2 x 1/4
Rec. 1S 8-1/2 x 3/8
Rec. 1S 8-1/2 x 1/4
Rec. 1S 8-1/2 x 1/2
Rec. 1S 8-1/2 x 5/8
Rec. 1S 8-1/2 x 11/16
Rec. 1S 8-1/2 x 3/4
Rec. 1S 8-1/2 x 7/8
Rec. 1S 10-1/2 x 7/8
Rec. 1S 8-1/2 x 15/16
Rec. 1S 8-1/2 x 1
Straight
Straight
Straight
Straight
Straight
Straight
Rec. 2S 10-3/4, 1S 1/8, OS 3/4
Rec. 2S 19 x 1/16
Straight
Rec. 2S 19 x 1/16
Straight
Straight
Rec. 2S 19 x 1/16
Rec. 2S 19 x 1/16
Straight
Straight
Rec. 2S 19 x 1/16
Rec. 2S 19 x 1/16
Rec. 2S 19 x 1/8
Straight
Rec. 2S 19 x 1/16
Rec. 2S 19 x 1/8
Rec. 2S 19 x 3/16
Rec. 2S 19 x 3/16
Rec. 2S 19 x 1/4
Rec. 2S 19 x 1/4
Rec. 2S 19 x 1/4
Rec. 2S 19 x 3/8
Rec. 2S 19 x 3/8
Rec. 2S 19 x 3/8
RE335455
RE335456
RE335457
RE335458
RE335539
RE335459
RE335460
RE335461
RE335462
RE335463
RE335464
RE335467
RE335466
RE337312
RE335468
RE335469
RE335470
RE335474
RE335488
RE337313
RE335489
RE341931
RE339175
RE335490
RE335491
RE340720
RE347998
RE335493
RE345476
RE335495
RE335496
RE335379
RE335378
RE335380
RE335381
RE335383
RE335384
RE335386
RE335387
RE335388
RE335389
5
5
5
5
5
5
5
5
5
5
5
1
1
1
1
1
1
7
7
1
7
1
1
7
7
1
1
7
7
7
1
7
7
7
7
7
7
7
7
7
7
Winona-Van Norman
438, 448, 460 & 465
Winona-Van Norman
438, 448, 460 & 465
RMC/Robbi Rex 1200
AMC K-1100 K-1400
K-1500, K-1800
Peterson-Berco
180B, 225A & 225B
225C, RT225
Winona-Van Norman
438, 448, 460, 465,
475, 476, CG210
Zanrosso 210 & 230
RG 230
New Scledum
Storm-Vulcan 230 Std
Storm-Vulcan 230 Prod
Scledum 200, 230
Please allow 1-2 weeks for delivery. Special order wheels can be
made to your specification. Contact us for more information.
49
CRANKSHAFT GRINDING
CRANKSHAFT GRINDING
DIMENSIONS
MACHINE/MODEL
28 x 3/4 x 8
28 x 7/8 x 8
28 x 7/8 x 8
28 x 15/16 x 8
28 x 15/16 x 8
28 x 1 x 8
28 x 1 x 8
28 x 1-1/16 x 8
28 x 1-1/8 x 8
28 x 1-3/16 x 8
28 x 1-1/4 x 8
28 x 1-3/8 x 8
28 x 1-1/2 x 8
28 x 1-5/8 x 8
28 x 1-5/8 x 8
28 x 1-11/16 x 8
28 x 1-11/16 x 8
28 x 1-3/4 x 8
28 x 1-7/8 x 8
28 x 1-7/8 x 8
30 x 3/4 x 8
30 x 7/8 x 8
30 x 15/16 x 8
30 x 1 x 8
30 x 1-1/4 x 8
32 x 3/4 x 8
32 x 3/4 x 8
32 x 7/8 x 8
32 x 1 x 8
32 x 1-1/8 x 8
32 x 1-1/4 x 8
32 x 1-3/8 x 8
32 x 1-1/2 x 8
32 x 1-7/8 x 8
32 x 3/4 x 12
32 x 7/8 x 12
32 x 15/16 x 12
32 x 1 x 12
32 x 1-1/8 x 12
32 x 1-1/4 x 12
32 x 1-1/2 x 12
32 x 1-3/4 x 12
32 x 1-15/16 x 12
32 x 2 x 12
36 x 3/4 x 12
36 x 7/8 x 12
36 x 15/16 x 12
36 x 1 x 12
36 x 1-1/8 x 12
36 x 1-1/4 x 12
36 x 1-3/8 x 12
36 x 1-1/2 x 12
36 x 1-3/4 x 12
36 x 1-7/8 x 12
36 x 2 x 12
36 x 2-1/4 x 12
Peterson-Berco
260, 260A, 260B
270A, 270B, 270C
Winona-Van Norman
400, 438, 439
475, 476, 477,
666, CG-250
Scledum RG 270
RG270Y, RG280
Zanrosso Series
Robbi Rex 1500
1
5
7
21
WHEEL
TYPES
OTHER DIMENSION
PRODUCT #
Straight
RE337315
Straight
RE337316
Rec. 2S 19 x 1/16
RE335396
Rec. 2S 19 x 1/16
RE335397
Straight
RE341932
Rec. 2S 19 x 1/16
RE335398
Straight
RE337317
Straight
RE342342
Rec. 2S 19 x 1/16
RE335400
Rec. 2S 19 x 1/16
RE345477
Rec. 2S 19 x 1/8
RE335402
Rec. 2S 19 x 1/8
RE335403
Rec. 2S 19 x 1/8
RE335404
Rec. 2S 19 x 1/8
RE335405
Rec. 2S 19 x 3/16
RE335406
Rec. 2S 19 x 3/16
RE345478
Rec. 2S 19 1S 3/8, OS 1/8 RE335408
Rec. 2S 19 x 1/4
RE341933
Rec. 2S 19 1S 3/8, OS 1/8 RE337318
Rec. 2S 19 x 5/16
RE341281
Winona-Van Norman
Straight
RE322599
Zanrosso 280, AMC 2000 Straight
RE335412
SV/Scledum 270, 280
Straight
RE345864
RMC/Robbi Rex 1800
Straight
RE337319
2200L, 2700RM,
Straight
RE340501
Winona-Van Norman
*Straight
RE344089
467, 471, 477,
*Special Dimensions
RE335417
472, CG300
Straight
RE335418
Zanrosso 280
Straight
RE335419
AMC Machine
Straight
RE335420
1400, K1500, K1800
Straight
RE335422
Straight
RE335423
*Special Dimensions
RE335424
Straight
RE335427
Peterson-Berco
Rec. 2S 26 x 1/32
RE335429
TM 280, 300 & 300A
Rec. 2S 26 x 1/32
RE335430
Scledum 280
Rec. 2S 26 x 1/32
RE335431
Rec. 2S 26 x 1/32
RE335432
Rec. 2S 26 x 1/16
RE335433
Rec. 2S 26 x 1/8
RE335434
Rec. 2S 26 x 1/8
RE335435
Peterson-Berco
Rec. 2S 26 x 1/4
RE335436
TM 280, 300 & 300A
Rec. 2S 26 x 1/4
RE335125
Scledum 280
Rec. 2S 26 x 3/8
RE335126
Peterson-Berco
Straight
RE335127
300, 350, 350A
Straight
RE335128
350B, 350C & 350D
Straight
RE335129
Scledum
Rec. 2S 29 x 1/16
RE335130
Winona-Van Norman
Rec. 2S 29 x 1/16
RE335131
111
Rec. 2S 29 x 1/16
RE335132
Rec. 2S 29 x 1/16
RE335133
Rec. 2S 29 x 1/8
RE335134
Rec. 2S 29 x 1/4
RE335135
Rec. 2S 29 x 1/4
RE335136
Rec. 2S 29 x 3/8
RE335437
Rec. 2S 29 x 3/8
RE335438
50
TYPE
1
1
7
7
1
7
1
1
7
7
7
7
7
7
7
7
7
7
7
7
1
1
1
1
1
1
21
1
1
1
1
1
21
1
7
7
7
7
7
7
7
7
7
7
1
1
1
7
7
7
7
7
7
7
7
7
The following popular sizes of heavy metal dowel pins are in stock:
Product Number
Dimensions
Weight
HM454
7/16” x 7/8”
43 grams
HM005
1/2” x 0.750
43 grams
NP-N
1/2” x 1.000
57 grams
HM006
1/2” x 1.200
65 grams
N-PN
5/8” x 1.000
91 grams
NPN
5/8” x 1.200
110 grams
HM065
3/4” x 1.000
122 grams
HM750
3/4” x 1.200
147 grams
HM008
7/8” x 1.000
169 grams
HM009
7/8” x 1.200
198 grams
HM010
1” x 1.000
227 grams
HM011
1” x 1.200
265 grams
ROD & CAP GRINDING WHEELS
SUNNEN
PART NO.
MFG. NO.
SIZE
SHAPE
REK-695
CRG-305
4 x 1-1/2 x 1
RECESSED
REK-750
CRG-805
6 x 2 x 1-1/4
RECESSED
TOBIN-ARP
PART NO. MODEL NO.
REK-990
CG 8400
SIZE
SHAPE
7 x 1 x 1-3/4
RECESSED
51
TUNGSTEN HEAVY METAL FOR BALANCING
BRAKE WORK TOOLS AND SUPPLIES
Premium C.B.N. Flywheel Grinding Wheels
Superior Wheels
Reduce your flywheel resurfacing
cost with our C.B.N.
grinding wheels.
C.B.N. flywheel resurfacing cuts faster,
lasts up to 10 times
longer, and keeps
machines cleaner than silicon carbide wheels. C.B.N. wheels use
the same mounting as silicon carbide wheels.
Prod. #
Description
F3D11
3” Cup Wheel
F5D11
5” Cup Wheel
F6D11
6” Cup Wheel
F1D
Diamond Dresser
For best results, use our HPC-653 PINK COOLANT in with your grinding wheels.
See our “LUBRICANTS/COOLANTS” section.
Flywheel Grinding Wheels
Flywheel grinding wheels for Winona, DCM Tech, RMC,
Machen, Kwik-Way, Serdi, Delta, and Van Norman.
An excellent quality grinding wheel for all-around usage.
Product #
Description
Size
CGF6C
Flare Cup
Black 6” x 2 1/2” x 1 1/4” hole
BAR8283R
Flare Cup
Ruby 6” x 2 1/2” x 1 1/4” hole
CGF6S
Flare Cup
White 6” x 2” x 1 1/4” hole-46 grit
BAR8279
Flare Cup
Black 4” x 1 1/2” x 1 1/4” hole
BAR8281
Flare Cup
White 4” x 1 1/2” x 1 1/4” hole
REK-1053
Straight Side Cup
Black 6” x 2 1/2” x 1 1/4” hole
STONE DRESSERS
For Winona FG-3000, 5000, & 7000 Flywheel Machines
Part #
Description
REBB-50
Complete Dresser Assembly
REBB-50A
Replacement Cutter
For Olcott, DCM Tech, & Blanchard Dressers
Part #
Description
REBB-57
Complete Dresser Assembly
REBB-57A
Replacement Cutter
52
PART NO.
GRIT
BRRMFH60Z25
COURSE
BRRMFH120Z25
MEDIUM
BRRMFH240Z25
FINE
REPLACEMENT CARBIDE TIPS FOR BRAKE LATHES
FOR AMMCO
FOR VAN NORMAN
PART NO.
TYPE
PART NO.
VAN NORMAN NO.
REC-1001
TITANIUM COATED-R*
REC-5190
29687
REC-1001A
SOLID CARBIDE– R*
SIZE: 3/8” INSCRIBED CIRCLE
REC-3001
SOLID CARBIDE– NR*
FOR VN DISC LATHES– 205DC, 415 & OTHERS
FOR VN DISC & DRUM LATHES– 204, 205, & HUNTER
REC-6499
SET SCREW
* R= REVERSIBLE ; NR= NON– REVERIBLE
FOR VAN NORMAN
FOR FMC & ACCUTURN
PART NO.
FMC NO.
REC-5190
FMC-487
FOR MODEL NO. B-400, 401, 410, 500, 510, 600, 601, 610
PART NO.
VAN NORMAN NO.
REC-1075R
24176D
REC-1005L
24209D
(RIGHT HAND) REC-1075R– FOR VN MOD. 204, 204C, 205,
205DC, 300, 302, 333.
(LEFT HAND) REC-1005L– FOR VN MOD. 204S, 301, 303,
304, 305, 310, 404, 405.
FOR KWIK WAY
PART NO.
KWIK-WAY NO.
REC-7854
109-1092-07
FOR BEAR (1410, 1467, 1468)
FOR STAR (XDS, XD1, 835A,1776)
PART NO.
VAN NORMAN NO.
REC-4800
72264-65
FOR BEAN (400, 500, 600 SER)
PART NO. STAR NO.
REC-3800 CB-56
PART NO.
VAN NORMAN NO.
REC-5800
487
BRAKE DRUM GRINDING WHEELS
FOR VAN NORMAN
(204, 302, 303, 304, 204H, 333, 404)
PART NO
MFG. NO. SIZE
REK-111
29594
3” x5/8”x3/4”
REK-122
8522
3”x5/8”x1”
REK-211
8931
3-1/2”x5/8”x1”
REK-424
8523
4”x5/8”x1”
REK-744
8524
5”x5/8”x1”
53
FOR VAN NORMAN (BIG BRUTE)
REK-123
3’x1”x1”
REK-425
4”x1”x1”
AMMCO
REK-204
333
REK-112
Y235
2-1/2”X3/8”X3/8”
LEMPCO
3”x1/2”x5/8”
BRAKE WORK TOOLS AND SUPPLIES
BRAKE ROTOR FLEX-HONE®
CYLINDER HEAD TOOLS & SUPPLIES
ENGINE & PARTS SPRAY PAINTS
RESTORES A NEW LOOK TO REBUILT ENGINE PARTS
These specifically designed spray paints assure a “fresh from the
factory” look preferred by rebuilders. This paint is a durable,
quick-dry formula that has excellent adhesion and can be top
coated with OEM engine colours.
PART NO.
PRODUCT NAME
APPLICATION
SIZE
CBG048
CAST BLAST
CAST IRON
12oz
CBA055
ALUMI-BLAST
ALUMINUM
12oz
CBB067
NEW BLACK
UNIVERSAL BLACK
12oz
RECEIVE A 10% DISCOUNT WHEN PURCHASING A CASE OF 6
STEEL LETTERS & FIGURES
These letter and number stamps are an excellent grade for
general machine and production use. Heads do not mushroom or split. Number sets consist of 9 pcs. and letter sets
of 27 pcs. Including “&” sign. Packed in a sturdy wooden
box.
LETTERS
NUMBERS
RE18LDF
1/8” FIGURES
0-9
RE18LDF
1/8” LETTERS
A-Z
RE316LDF
3/16” FIGURES
0-9
RE316LDF
3/16” LETTERS
A-Z
RE14LDF
1/4” FIGURES
0-9
RE14LDF
1/4” LETTERS
A-Z
ENGINE PRE-LUBER
REELP-1
Prevent damage done by dry cranking or dry starts on a
rebuilt engine. Use this air powered oiler to fill crankcase or fill oil galleys. Some shops loan these out with a
remanufactured engine as part of the warranty
54
Ensure your work against warranty claims
Heat Tabs are your cheapest insurance against someone else
damaging your rebuilt cylinder heads and blocks and causing you
to pay for the repairs.
The cost of this insurance is less than $1 for the time, labor and
material. The 250° F heat tab:
A) Proves the engine was over heated by the driver.
B) If the tab is removed, the warranty is void.
The center of the Heat Tab will melt if it is exposed to temperatures greater than 250° F.
Simply write or stamp on the customer’s work order:
“250° F Heat Tab attached. No warranty if heat exceeds 250° F, or if Heat Tab is removed.”
Product #
Description
HT100
250° Heat Tab with Hole- 100pk
HT250
250° Heat Tab with Recessed Depression- 100pk
DEVCON® HEAT TAB ADHESIVE
4 OZ TUBE-ORDER PART NO. REDECON
(DEVCON® IS ALSO A GREAT METAL SEALER/FILLER)
ENGINE, HEAD, & CRANKSHAFT BAGS
Protect you finished product with our Heavy Duty
Poly bags. Two sizes are available for crankshafts, cylinder heads, and engines.
Packaged in 100 per box.
PART NO.
SIZE
USE
THICKNESS
RECB-10836
10”x8”x36” GUESSETED
HEADS & CRANKSHAFTS
.3 MIL
REEB-4050
40”x50”
ENGINES & BLOCKS
.2 MIL
55
CYLINDER HEAD TOOLS & SUPPLIES
HEAT TABS
MISCELLANEOUS TOOLS & SUPPLIES
SIOUX™ VACUUM TESTER
Part No. SX1630ESK
An economical, high quality vacuum tester to
check your entire valve train– valve, seat, stem
and guide– quickly and accurately.
Kit Consists of:
SX1630
Vacuum tester
SX1630-2
2” Disc
SX1630-3
3” Disc
SX1630-4
4” Disc
SX1630B
Hose
SX1630C
Spark Plug Adapter
TMT
O-Ring Wire
TAP, MACHINE AND TOOL
LUBRICANT
BENEFITS OF USING TMT:
•
•
•
•
•
LW7041
.042" STAINLESS STEEL WIRE–
1LB ROLL
IMPROVES LIFE OF REAMERS.
TAPS, CUTTERS, ETC.
PENETRATES EVEN THRU. RUST
REMOVES RUST
PREVENTS CORROSION
LEAVES A DRY, DUST REPELLING
SURFACE.
1-1/4 OZ BOTTLE: SL30111
GLASS BEAD GLOVES
Replacement gloves for glass bead machines . Overall
length of glove and integral gauntlet is 30” permitting use
in largest machines. Extra heavy–duty, cloth lined, neoprene glove provides very long life.
For machines with up to 8” glove ports
For machines with 10” glove ports
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
REKG
Pair of Gloves
REKG-KW
Pair of Gloves
REKGR
Right Hand Glove
REKG-KW-R
Right Hand Glove
REKGL
Left Hand Glove
REKG-KW-L
Left Hand Glove
56
These gloves are alkaline and oil resistant. Made from
poly-vinyl chloride. Knitted cotton liner will not peel, and
is fully washable. 6” gauntlet protects wrist and forearm.
Exclusive, coarse rubber finish minimizes slipping when
handling wet or oily parts.
WIRE BRUSHES
PART NO. REGHT
CARBON REMOVAL BRUSH
We carry a wide range of wire wheel
brushes, cup brushes, and end brushes.
Refer to your Brush Research catalogue
or call us for more information
PART NO: RECBS-500
DIA.
WIRE
SHANK
O.A.L.
RPM
1/2”
.014
1/4”
6-1/4”
600
Self-Tapping Thread Repair Inserts
57
HOT TANK GLOVES
SELF-TAPPING SPARK
•
•
•
•
PLUG THREAD REPAIR
Permanent (Won’t Back Out)
Leak Proof
Easy to Use
Low Cost
Unlike ordinary helically coiled inserts, these inserts are solid
bushings. Consequently, they always provide a precision fit for
spark plug threads and can never leak compression or fluids.
Once installed, the tapping holes trap cuttings and positively lock
the insert in place.
58
Notes:
59
Notes:
60

C-PEX - Canxus

Transcription

Similar documents

7L[LY 4PSSLY Actinism

Die BUCHSTAVIER - Das Dosierte Leben

CMC Ferrari 156 F1 1:12 Bedienungsanleitung