Survey / Mapping CaTaLOgue - Wenger Vermessungstechnik Jena

Camburger Str. 86 - 07743 Jena
Telefon: 03641-366980 Mobil: 0172-3592559
Internet: W-VT.de E-Mail: [email protected]
Survey / Mapping CATALOGUE
Introduction
Always innovative
Topcon is the worldwide leading developer and manu-
available with your positioning solutions to stay at the top of
At Topcon we understand that the choices available for
facturer of precision positioning equipment and offers a
your profession. We pride ourselves in continually develop-
positioning tools can sometimes seem a little bewildering;
wide selection of innovative Surveying, Engineering, GNSS
ing innovative and potentially world leading technologies.
because of this, we have compiled this catalogue in order to
systems, Laser, Machine Control solutions, Mobile Mapping
Utilising unique technologies, our products provide the best
assist you to make the right decisions as to what you need
and GIS products.
solutions to simplify and improve your everyday tasks.
to for your specific projects.
At Topcon we know your geo-business world is getting in-
Topcon’s innovations help you increase your productivity,
creasingly competitive. Therefore it is vital to constantly in-
satisfy challenging demands of your clients and assist you
vestigate and utilise each and every competitive advantage
to enter new markets.
TOPCON
Index of contens
Page 2
Introduction
Page 13
Page 3 Topcon Technologies
Page 14
GRS-1 - Dual Frequency GNSS Receiver
The world of precision – Topcon solutions
Page 15 NET-G3A – GNSS Reference Station Receiver
TopNET+ / TopconTools – Software
Page 4 -5
HiPer II – Dual Frequency GNSS Receiver
Page 6
MS AX – Measuring Stations
Page 16
Page 7
IS-3 – Imaging Station
Page 17
Page 8
QS – Quick Station
Page 9
Manual Non-Prism Total Stations
Page 20
GLS-1500 - Laser Scanner / IS-3 Imaging Station
Page 10
DL-500 Series – Electronic digital level
Page 21
ImageMaster / ScanMaster - Office Software
Page 11
TopSURV / SurveyMaster – Software
Page 12
GR-5 – Advanced GNSS Receiver
Page 18 - 19 Page 22 - 23
IP-S2 Mobile Mapping System Rugged Field Controllers Product Application Matrix
2
Technologies
Overview Topcon Technologies used in diverse fields of application
Capture Reality – With our imaging heritage, it is not
Long Range – Topcon total stations feature our incredible
Matrix Detection – Available on our range of high preci-
surprising to find that many of our high end sensors incor-
reflectorless technology which enables measurements of up
sion MS AX sensors, this technology automatically locates
porate imaging technology. These allow our users to not
to 2,000 m with pinpoint accuracy. Imagine being able to
any prisms within a specified area, totally eliminating the
only measure, but to Capture Reality; using the IS Imaging
set up and carry out survey measurements from positions
need for manual guidance even with close-up prisms adja-
Station, GLS-1500 laser scanner, IP-S2 mobile mapping and
of inaccessible locations or scan quarry faces from great
cent to each other!
even from high resolution imagery from DSLR cameras.
distances. Our QS, IS and GPT-7500 sensors all feature this
capability.
technologies
Universal Tracking – All of Topcon’s G3 GNSS receiv-
G3 – Our innovative Paradigm G3 chipset is a true leap
XTRAC8 – Our top of the range QS robotic and IS-3 imaging
ers feature the latest Universal Tracking technology, which
forward in technology in the positioning industry and is
stations both come as standard with our superior XTRAC8
allows for reception of all currently available and future
the world’s first multi-constellation processor utilising our
search, lock and tracking system. Employing entirely new
planned GNSS signals. Universal Tracking allows the future
Universal Tracking Channel technology. With a 75 percent
optics, laser system, and further advanced algorithms, and
proofing of Topcon’s receivers by not restricting channel se-
reduction in size compared to the previous Paradigm chip
in conjunction with our lightweight RC-4 remote control sys-
lection at the time of manufacture. Universal tracking gives
and using less power, the G3 still has the added process-
tem, we can ensure that the operator has the most efficient
the freedom to utilize the available signals all the time, now
ing power to fully exploit the additional signals and satellite
tools available when working on site in one-person mode.
and in the future.
systems of the future
3
The world of precision
The world of precision – Topcon solutions
Topcon offers – The most complete range of Total Stations
on the Market today. With an ongoing commitment to only
the best quality materials and ergonomic design characteristics, every instrument in the range is manufactured to exacting standards. This results in Total Stations that have a build
quality that is second to none, high accuracy that will give
years of reliable operation.
Whether you are looking for a Total Station for a small
construction project, a Robotic solution for Surveying or a
Monitoring Sensor, Topcon have the instrument to suit your
needs. Topcon’s ethos of providing the best quality and attention to detail is evident throughout the range. The ease
of use and dependability saves you time and money, no
matter what your project.
l Engineering
l Monitoring
l Cadastral
l Topographic
l Survey
l Construction
Survey
Precision Measurement
Topcon Solutions
GIS / Mapping
Mobile Data Gathering
l Utilities
l Governmental
l Environment
l Agriculture
l Forestry
l Asset Management
Efficient and Easy – Being able to offer easy to use
software that integrates geographically related workflows
in combination with our outstanding hardware is one of
Topcon’s highest priorities. It doesn’t matter what industry
you are from; Government, Utility and Infrastructure, Environment or Public Safety; with Topcon’s GIS and Mapping
solutions for handheld and Mobile Mapping systems you
are able to fulfill all of your tasks in the most efficient and
time-saving manner.
Our comprehensive software solutions, which you are able
to customise to your method of working, ensures that nonsurveyors are also able to carry out your required tasks and
offers huge benefits to your organisation.
4
Topcon solutions
Topcon Imaging products enable you to Capture Reality
and record all the detail on your project. What you see is
what you get; the products focus on this unique functionality and combine the strengths of clear visual and accurate
geometric information to allow you to communicate all
job information and structure to your client. The Imaging
product range ensures that you will always head back to the
office with everything you need to deliver the end result,
saving you time and money in the process.
From discrete point measurement to complete full colour
pointclouds the Imaging portfolio provides the right tool for
every situation and scale of work. No job is too big or too
small, Topcon have the solution you need to realise your
vision.
l Engineering
l Survey
l Construction
l Photogrammetry
l Forensics
l 3D Visualisation
Imaging
Capture Reality
Topcon solutions
GNSS
Satellite Positioning
l Engineering
l Geomatics
l Marine
l Cadastral
l Survey
l Networks
Intelligent GNSS workflow – By working with Topcon’s
GNSS solutions, you are automatically adding intelligence
into your workflows and job practices. Our extensive GNSS
product range ensures that you can pick the right solution
that fits your work tasks and needs.
GNSS technology not only is used for identifying simple
positioning tasks, it is becoming a baseline technology
that couples coordinated positions with advanced toolsets
to provide further value added information to more fully
analyse operations and maintenance phases. Make use of
it with our patented GNSS solution technology. With a comprehensive range of networks, recievers and antennas, we
can supply your exact requirements.
5
Total Stations – MS05AX / MS1AX Series
MS AX – Measuring Stations
Topcon's MS AX range of robotic total
super precision 0.5" angular measurements and 0.5 mm
stations are the highest precision sen-
distance measurement.
sors available. Whether your measurement task involves monitoring prisms on a damn wall,
Featuring the revolutionary Matrix Detection Monitoring
alignment observations through a tunnel or high accuracy
technology, the MS AX can make the estabishment of large
infrastructure layout, the MS AX is the perfect tool for the job.
number targets on a monitoring or tunnelling project a rapid
Designed specifically for projects where accuracy can not
and simple task, completely eliminating user errors.
be compromised, the MS AX is available with either a 1" or
key features - MS AX l 0.5” / 1” Angular Accuracy (MS05AX / MS1AX)
l Distance Accuracy of 0.5mm
l 1" / 1mm over 100m Auto-Collimation Accuracy
l Matrix Detection for auto-target detection
l Pinpoint 400m Reflectorless Range (MS1AX)
Survey
TopSURV
Monitoring Solutions – In addition to supplying you with
l Complete System
the most accurate and durable Monitoring Sensor on the
— MS AX 0.5" or 1" Instrument
market -the Topcon MS Series, Topcon offer all the addi-
— Dual Charging Cradle
tional hardware and software required for any monitoring
— Choice of optional field controllers
project. With off the shelf solutions to control and power
— Li-Ion Batteries
one instrument. For multiple instrument networked solu-
— Compact Carry Case
tions, we have a package which is suitable for you.
— Instrument TopSURV Onboard for MS
— Compatible with third party
Automatic and comprehensive reporting of displacement is
available throughout the range, with SMS and mail notifica-
— Manuals & Utility software
monitoring solutions
tion when tolerances are exceeded.
MS AX Package
6
Total Stations – IS-3 Series
IS-3 – Imaging Station
Take the power, accuracy and speed of the
data communications, the IS-3 is the most advanced and
innovative Topcon robotic instruments,
powerful imaging robotic station available. Incorparating
add our legendary imaging capabilities and
our fast iSCAN measurement routine to enable thorough
faster scanning speeds... and you have the IS-3.
automated data collection defining your subject using realtime image capture: options include Feature Detection or
With dual wide angle and coaxial imaging sensors, superior
Grid Scan to automatically measure significant points or a
X-TRAC8 tracking technology, 2 Km reflectorless range, inte-
'regular' grid.
grated WiFi and interference free 2.4 GHz Spread Spectrum
key features - IS-3
l Twin Cameras – wide angle and coaxial for true through the lens view
l iSCAN intelligent feature scanning
l 20 points per second scan rate, with 2000 m range
l iDRIVE lets you visually operate from the controller and easily switch
from imaging to prism tracking
l Photo Fieldbook – creates a 360° panorama in seconds
l Long range wireless with up to 10fps
Survey
WT-100
WT-100 – Using the new WT-100 wireless data link device,
l Complete Imaging Robotic System
users can dramtically extend their wireless working range...
— IS-3 1” or 3” Instrument
now up to 300 m!
— Charging Cradles
— Choice of field controllers with TopSURV
This means that users are able to increase the range with
— WT-100 WiFi device
which they can use the incredible 10 frames per second live
— Lightweight 360° prism
video feed from the IS to lock on to the prism with pin point
— TopSURV on Board for IS
precision using iDRIVE.
— ImageMaster (Remote Control
and Office Processing software)
— Manuals & Utility software
IS Package
7
Total Stations – QS1A / QS3A / QS5A Series
QS – Quick Station
With a modern, cable-free design,
torless measurement superior to any other instrument
the QS offers the most advanced
available – capable of precision measurements at a mind-
robotic technology available. Topcon’s
boggling 2,000 m!
one-touch Quick Lock feature that set the standard in robotic target acquisition has taken another
The waterproof, dustproof instrument design is ready to
step forward, with our XTRAC 8 offering stronger
take the punishment that can be expected on the harshest
tracking and quicker re-acquisition in challenging
job site conditions.
environments. Our QS Series robotic systems offer reflec-
key features - QS
lSuper Fast RC-4 one-touch Quick Lock technology
l X TRAC 8 – Robust Prism tracking even at close range
l Advanced prism movement prediction
l Industry leading (eye safe) 2 km Reflectorless Measurement
l Interference Free 2.4 GHz Spread Spectrum Radio
l Complete Cable-free Solution
Survey
Integrated Surveying
By integrating GNSS RTN (Network RTK) and Robotic
Total Station (RTS) technologies, your job site produc tivity can be increased dramatically.
By using the QS robotic with our handheld GRS-1
RTK controller & PG-A1 antenna and TopSURV,
this method of working is easy!
QS
RC-4
TopSURV
l Cable-free package solution
Field Controllers
— All new QS Robotic Instrument
— RC-4R Remote Control with
2.4 GHz SS Radio
— Choice of Field Controller
— A7R 360 deg prism
— TopSURV controller software
FC-2500
FC-250
FC-25A
QS Package
GRS-1
8
Total Stations – GPT-7500 / GPT-3100N Series
Manual Non-Prism Total Stations
GPT-7500 – Topcon’s reflectorless GPT-
GPT-3100N – Available in 2, 3, 5, 7" versions with display
7500 Total Station provides a lighter,
resolution to 1”, the GPT-3100N satisfies the need for a
faster survey solution for handling your
compact, traversable total station with surveying practice
biggest jobs. Enjoy the benefits of the industries longest re-
accuracies guaranteed. The GPT-3100N Series have Ingress
flectorless range ... up to 2km! As well as the large onboard
Protection rating of IP66, which make them perfect for the
memory, with the dual USB sockets and CF slot, there's
high demands of a construction site. It also offers a high ac-
plenty of space to store all your positioning information.
curacy reflectorless EDM mode for pinpoint measurements
up to a 400m range.
key features - GPT-7500
l Rugged build design to withstand harsh site conditions
l Longest non-prism range – 2000 metres
l Fast On board Windows field collection software
l Large, backlit keypad with bright, color LCD touch-screen display
l CF card, USB Type A and USB mini slots delivers versatile
memory capabilities
Survey
key features - GPT-3100N
l Fully waterproof with IP rating IP66
l 4 00 m Reflectorless Range
l Integrated (optional) Bluetooth communications
l Fast measuring time
l Multi-Pulse EDM Technology
l Intuitive onboard Survey / Layout software
GPT-3100 NW / FC-236 Controller
l Standard packages
l Standard packages
— GPT-7500 / GTS-750 Series
— GPT-3100N series
— Battery BT-65Q / Battery Charger BC-30
— Battery BT-52QA
— Plumb bomb set
— Battery charger
— Instruction Manual
BC-27BR (120 V) or
— Plastic Rain Cover
BC-27CR (230 V)
— Tool Kit
— Charging Cradles
— Carrying Case
— Tool kit with case
— Stylus Pen
— Carrying case
— USB Cable F-25
— Plumb bob set
— Display Protection Sheet
GTS-750 Package
9
GPT-3000N Package
Digital Level – DL-500 Series
DL-500 Series – Electronic digital level
Topcon’s DL-500 Series digital levels maximise work
conditions. Even when the staff surface is partially shaded,
efficiency whilst at the same time minimise human errors,
or in low lighting conditions the DL-500 instantly shows
providing consistent measurement precision and speed
reliable results. Using the world’s first “Wave-and-Read”
regardless of the operator’s skill level.
technology, the DL-500 allows the rod person to wave the
staff back and forth, instead of keeping the staff plumb, so
Incorporating cutting-edge Random-Bidirectional (RAB)
identifying the true and correct staff reading.
coding technology, the DL-500 provides exceptional accuracy, stability and speed, under a variety of environmental
key features - DL-500 l Fast 1.5 second measuring time
l Auto-detection of staff attitude
l Ability to measure lowest height on rocking staff
l Sub-millimetre mesaurement accuracy
l E xtended 16 hours battery life
Survey
DL-502
Applications
l Standard configuration
Elevation – Calculates elevation of foresight (FS) with refer-
– DL-502 / 503 Digital Level unit
ence to backsight (BS) elevation. Elevation of the turning
– BDC46B Li-ion battery
point (TP) is used for a new backsight, allowing for consecu-
– CDC68 charger
tive leveling.
– EDC113 AC power cable
– Hex wrench
Cut and Fill – Cut and fill stakeout routines facilitate slope
– Vinyl cover
work.
– User manual
– Carrying case
Ceiling Height – Two measurements provide a ceiling height;
one with a staff placed on the ground, the other with an inverted staff put onto the ceiling. Ceiling elevation can also
be calculated with reference to the benchmark elevation.
DL-502 Package
Height Difference – Automatically displays the height difference between backsight (BS) and foresight (FS).
10
Software – TopSURV / SurveyMASTER
TopSURV – Field Controller Software / SurveyMaster – Office Software
TopSURV is Topcon's powerful and intuitive field controller
can switch seamlessly between total station mode to GNSS
your controller to the PC. With CAD interoperability, full col-
software package. Running on a number of different plat-
within any project. All device configurations are stored and
our graphic map views, extensive code, line and layer styles,
forms, TopSURV takes care of all of your field operations
are just a click away.
a vast number of stakeout options as well as advanced
from data transfer and management, control establishment,
Roading design and layout funcitonality, TopSURV has eve-
topographic survey, stakeout, scanning, monitoring, COGO
With an incredible number of importing and exporting op-
and much much more besides. TopSURV8 makes it easy to
tions available and with seamless integration with Survey-
integrate all of your Topcon sensors within a worksite and
Master, you can synchronise jobs every time you connect
TopSURV
rything you need to get you job done, easily and efficiently!
key features - TopSURV
l Intuitive Graphical User Interface (GUI)
l Visual Stakeout
l Map View data collection
l Fast job management and storage
l Advanced Roading
Survey
key features - SurveyMaster
l Totally transportable solution – runs ON the USB key
l Two-way data synchronization with TopSURV jobs
l Survey specific tools and full CoGo functionality
l TIN / Surface and contour creation & Volume Analysis
l Full long and cross section creation and analysis tools
SurveyMASTER
SurveyMaster provides you with the complete desktop
SurveyMaster Lite contains land survey specific function-
Both SurveyMaster and SurveyMaster Lite provide
survey solution. Whether it’s a simple boundary survey with
ality. Packed with drafting tools, survey data editors, adjust-
numerous COGO and survey specific routines. Everyday
a one page print out of the site nd property or a compli-
ment routines and contouring, and with completely seam-
COGO functions such as bearing / dist intersections, point in
cated multi-surface construction jobsite with roads, utilities,
less integration with TopSURV powered field controllers,
direction calcs as well as calculation of point position from
machine control, and buildings, SurveyMaster gives you
SurveyMaster Lite allows rapid contouring and production
offset and distance data are all available. Survey specific
everything you need to complete a project. From field-to-
of the final plan. Exchange design information with other
tools such as traverse entry / editors, deed entry / editors,
finish, control the critical data flow from data collection, raw
construction professionals and relay to the site team for
legal description writer, point translations, and many more
file analysis, engineering design, to final print efficiently with
setting-out.
are at your fingertips.
SurveyMaster.
SurveyMaster Plug'n'Go USB Solution
11
GNSS Receivers – GR-5 Series
GR-5 – Advanced GNSS Receiver
Offering advanced design features not
the GR-5 also boasts easily accessible SDHC card memory
found in other receivers, the GR-5’s
and dual hot-swappable batteries for unlimited continuous
modern design provides the flexibility
operation.
and ease-of-use you demand.
As well as being totally committed to the GPS, GLONASS
With a rugged magnesium I-beam construction for unbeata-
and Galileo satellite systems, Topcon is also committed to
ble strength and durability, and incorporating our Fence An-
the precision signals from the developing systems from
tennaTM technology for unparalleled tracking performance,
China, Japan and India.
key features - GR-5 l216 Universal Tracking Channels
l Multi-constellation (GPS, GLONASS, Galileo)
l Fence Antenna Technology
l Multiple Radio and Cellular Modem combinations
l SDHC data storage support
GNSS
GR-5
GR-5
l Dual Receiver Package
Field Controllers
— Two GR-5 Receivers
— Charging Cradles
— PC Data Cables
— Hard Carry Case
— Radio Antennas
— Manuals & Utility software
— Fixed Height Tripod
FC-2500
FC-250
FC-25A
GR-5 Package
FC-236
12
GNSS Receivers – HiPer ll Series
HiPer II – Dual Frequency GNSS Receiver
Smaller. Lighter. Faster. More Affordable. The HiPer II
Our GPS+GLONASS, dual-frequency signal tracking tech-
receiver is designed on these clearcut concepts. This state-
nology offers superior positioning capability over the GPS
of-the-art receiver not only offers further enhanced ability,
only receivers. It makes a real difference where sky visibility
but also increases receiver performance and user-friendli-
is limited such as in urban canyons or in woodlands, near tall
ness. The fully customisable structure provides maximum
fences or other blockages. With integrated UHF Radio and
flexibility to choose your required options.
GSM Cellular Modems available it's simple to work in the
environment of your choosing.
key features - HiPer II
l Dual frequency GPS & GLONASS
l Magnesium-Alloy Construction
l Bluetooth® connectivity
l Integrated UHF Radio & GSM Modems
l SD / SDHC Memory Card Slot for flexible storage options
GNSS
TopSURV
l Hiper II Package
Field Controllers
— Hiper II
—Antenna
— Charging Cradle
— Hard Case
— Data Cables
— GNSS Detail Pole
— Field Controller
FC-2500
Hiper II Package
FC-250
FC-25A
FC-236
13
GNSS Receiver – GRS-1 Series
GRS-1 – Dual Frequency GNSS Receiver
Topcon's GRS-1 is the world's smallest
The internal GSM cellular modem can be used to re-
and lightest handheld RTK controller / re-
ceive NTRIP based corrections from your local TopNET+
ceiver. By integrating a dual frequency GPS / network correction service, or you can use the optional
GLONASS receiver board and L1 capable antenna within
RH-1 radio pack to connect into a local UHF based sys-
the unit, the GRS-1 can be used as the perfect handheld
tem. With an internal digital camera, integrated com-
mapping grade unit. With the addition of a G3-A1 survey-
pass and fast, the GRS-1 has everything you need
grade external antenna the unit can be easily and quickly
to get the job done quickly and efficiently!
converted into RTK level device.
key features - GRS-1 lSmall and lightweight design
lInternal GSM Modem for easy connectivity – ideal as part
of a Network Rover
lScalable and expandable system for all applications,
handheld or on the pole from cm to metres level accuracy
lIntegrated digital compass
lMulti-function – Survey / Construct / Navigate / Communicate
GNSS
GRS-1
The GRS-1 has a number of options available to allow it to
l Standard configuration
connect into different corrections services. The internal cell
–GRS-1
modem and RH-1 UHF radio pack can be use to achieve
– BT-66Q Li-ion battery
centimetric level RTN positioning. You can also use the cell
– BC-30 charger
modem for DGNSS correction services, or the BR-1 Blue-
– AC power cable
tooth® connected Beacon receiver can be used to get high
– Vinyl cover
accuracy mapping grade positons free of charge...
– User manual
– Carrying case
BR-1
GRS-1 Package
14
GNSS Receivers – NET-G3A / GB-3
NET-G3A – GNSS CORS Receiver / GB-5 GNSS Receiver
The NET-G3A is the World’s First refer-
The NET-G3A is intended for use as a highly sophisticated
ence receiver to provide Universal Signal
CORS (Continually Operating Reference Station), whether
Tracking. Using a patented technology,
this is working alone as a standalone base station on a local
the NET-G3A incorporates 144 Universal Tracking Channels,
worksite or as part of a regional or national network correc-
capable of tracking signals from all available systems (GPS,
tion service. With an integrated web interface, the NET-G3A
GLONASS, Galileo) as well as all future planned satellite
can be configured remotely via your standard web browser.
positioning constellations.
key features - NET-G3A
l144 Universal Channel Paradigm-G3 Chip
l Multi-Constellation Technology
l Low power consumption
lSuperior Signal tracking and Performance
l Compatible with ALL signals for existing and planned satellite
navigation systems
NET-G3A
GNSS
key features - GB-3 lDual frequency receiver
l F lexible system
l Suitable for base station static or backpack solutions
l 72 Universal Channel G3 Chip Technology
l Selectable Port Configuration
GB-3
The GB-3 introduces our incredible G3 technology to users who like to keep their options open when it comes to
configurations. Featuring the latest 72 Universal Channel G3
Technology capable of receiving signals from all present and
future satellite constellations GPS, GLONASS and Galileo.
A stand alone receiver without internal antenna or modem,
the GB-3 offers maximum flexibility for use as a reference
stations, mobile base station for RTK, static or kinematic
survey of RTK rover backpack solutions.
GB-3 - Versatile G3 GNSS Receiver
15
G3-A1
Geodetic Antenna
Software – TopNET+ / TopconTools
TopNET+ Correction Software / TopconTools – Processing Software
TopNET+ – Is Topcon's dedicated GNSS network correc-
of your choice. With a number of different accuracy levels
tion software which is in use throughout Europe providing
available, TopNET+ subscription services can be used for
correction services for end users. Subscribers to such ser-
mapping level activities such as local authoriuty asset man-
vices can carry out their usual surveying activities without
agement, precision agricultural tasks, up to the highest level
the need for a GNSS base station, as network corrections
of Network RTK suitable for most surveying, engineering
are supplied to the rover using a low cost GPRS connec-
and machine control projects.
tion, offering real time positioning in the coordinate system
GPS
GLONASS
TopNET Plus
DGNSS
Handheld
Reference
Station
key features - TopNET Plus
lMulti-constellation system
lFully scalable solution
lChoice of communications type
lQuality monitoring of satellite and site parameters
lAutomated email based warning system Station
lUpgrade from CORS to VRS Network Correction service
GNSS
key features - TopconTools
lCompatible with Windows XP, Vista and 7
lModular system for all Topcon devices & controllers
lCustomisable interface to suit the way you work
lMultiple graphical views of your data
lImport CORS data from your national network provider
TopconTools – Is our fully featured and intuitive Windows
In addition, TopconTools allows you to collect, process and
Carry out full Least Squares adjustment and produce wide-
based software solution for downloading, managing, pro-
adjust data from total stations and digital levels. Download
ranging reports which can be output to Word, Excel or HTML.
cessing and adjusting field data from all of your survey
raw GNSS data directly from your Topcon GNSS receiver
Choose from a number of graphical map, time based or
measurement sensors. With a variety of modules available
or remotely via an internet connection from your regional
tabular representations of the data.
for GNSS post processing, RTK reporting, GIS processing,
CORS network Post-process using Static, Kinematic, Stop
road design and much more!
and Go methods.
16
Mobile Mapping – IP-S2 Compact System
IP-S2 Compact
Topcon’s IP-S2 Mobile Mapping System
These technologies work together to sustain a highly ac-
overcomes the challenges of mapping 3D
curate 3D position for the vehicle. IP-S2 Compact includes
features at a high level of accuracy. Accurate
three LiDAR scanners oriented to cover the road surface and
vehicle positions are obtained using three technologies:
adjacent buildings up to 30 meters away. A high resolution
digital camera provides 360 degree spherical images at fixed
– A dual frequency GNSS receiver
distance intervals. All sensor inputs are recorded and time
– An Inertial Measurement Unit (IMU)
stamped to a common clock driven by the IP-S2.
– External wheel encoders
1
GNSS Antenna
1
2
360° Digital Camera
2
3
Laser scanners
3
4
IMU
4
5
Wheel encoders
5
GIS /Mapping
IP-S2 Compact
Georeferenced panoramas can be produced for visual
be computed even more accurately by comparing difference
inspection and detailed analysis such as time-dependent
in rotation speeds between two wheels.
changes in profile, geometry and location. An integrated
dual frequency GNSS receiver tracks both GPS and
Orbit Asset Inventory management allows integration of
GLONASS signals expanding the operation area.
IPS2 data with other sources like aerial imagery, maps, drawing or other data layers. The software offers full GIS software
An inertial measurement unit (IMU) constantly monitors ve-
functionality and allows users, or teams of users, to collect to
hicle motion and attitude, allowing the IP-S2 system to track
GIS data sets and create asset inventories with unparalleled
the vehicle position even when driving near obstructions or
ease of use and efficiency.
through tunnels where satellite signals can be blocked.
Orbit software loads both the IP-S2 point cloud and im-
17
Vehicle wheel encoders further enhance positioning ac-
ages and allows flexible and efficient inventory creation. The
curacy and reliability. Retrofitted to rear wheel axles, the
Client-Server architecture allows team working within a
encoder detects rotation of each wheel. Vehicle attitude can
single data set.
Field Controllers – FC-250 / FC-2500 System
Rugged Field Controllers
If you are looking for a compact controller that provides in-
FC-250 is the perfect field controller for any job. The FC-250
credible performance, look no further than Topcon’s FC-250.
also provides a wide range of wireless technologies, coming
Incorporating Windows Mobile 6.5 operating system with
as standard with Bluetooth and WiFi. It also has the options
a crisp, bright, colour touch screen display the FC-250 re-
to use the Snap-In RS-1 Spread Spectrum Radio for use with
ally makes your field data come alive. With the dual remov-
our QS & IS ranges of robotic total stations.
able media for data storage and transfer, the easy to access
rechargeable battery and the compact handheld design,
key features - FC-250 lRugged environmental protection to IP66
lWiFi, Bluetooth and optional RS-1 Wireless functionality
lUltra-bright full-colour 3.8” VGA touch-screen displayr
lUltra-bright full-colour 3.8” VGA touch-screen display
lFast 806MHz processor easily handles all processing needs
lMultiple data transfer options, SD & CF Card and USB Sticks
FC-250
Field Controllers
key features - FC-2500
lHigh resolution 5MP digital camera
lIndustry leading IP67 and MIL-STD 810F Environmental
and Shock Protection
l55 key alpha-numeric keyboard for ease of data entry
lHot-swappable Li-Ion batteries for infinite work-time
lComprehensive Wireless connectivity options
FC-2500
The FC-2500 is the perfect solution if you require a robust
An integrated 5MP digital camera is also available featuring
field controller with full alpha-numeric keyboard. With an
auto-focus and automatic flash. With an incredible battery
ingress rating of IP67 and shock resistance to MIL-STD 810F,
life of up to 50 hours, the FC-2500 also features dual hot-
the FC-2500 will work in any conditions that you can! Along
swappable Li-Ion batteries, meaning that there really is no
with the WiFi and Bluetooth wireless options, the FC-2500
limit to how long you can use this controller!
is compatible with our RS-1 Spread Spectrum radio for use
with our robotic range of total stations.
18
Field Controllers – FC-236 / FC-25A Series
Rugged Field Controllers
Our FC-236 packs a huge number of features into a compact
Coming as standard with a 806 MHz processor, Windows
and lightweight unit. With full numeric keypad, extended
Mobile, 4 GB of flash memory and 128 MB RAM, the inte-
and intelligent battery life, integrated cellular modem, 3 MP
grated SDHC card slot allows for Secure Digital cards up to
camera, internal L1 GPS receiver, compass and powerful
16 GB to be used for data storage and transport.
Windows Mobile operating system, this controller has everything you could possibly need as a field computer system
and more!
key features - FC-236 lIntegrated SiRF Star III GPS receiver
lWiFi, Bluetooth® and Cell modem for wireless data exchange
lMultiple connectivity options for data transfer
l3 Mega Pixel Auto-focus Camera
lIndustry leading IP67 & MIL-STD-810G Environmental Protection
FC-236
Field Controllers
key features - FC-25A lIncredibly lightweight field controller (320g)
lRugged design with IP65 Ingress Protection
lWLAN / Bluetooth® Wireless
lField-exchangeable Li-ion Battery
lIntegrated digital camera, compass and altimeter
FC-25A
Featuring an exceptionally rugged, pocket-sized and light-
at only 320 gm and measuring only 144mm tall by 83 mm
weight construction, the Topcon FC-25A is the controller
wide, you'll forget you are carrying it! The embedded
designed to work in the most severe work site conditions.
20 channel GPS chipset provides positional information by
point positioning or by DGPS using SBAS corrections.
With environmental rating of IP65 and MIL-STD-810G, the
The FC-25A also incorporates a 3MP auto focus camera,
FC-25A will work where ever you need it to work. It is also
electronic compass and an altimeter for GIS data collection
the smallest and lightest controller available. Weighing in
applications.
19
Laser Scanner – GLS-1500 / IS-3 Series
GLS-1500 - Laser Scanner / IS-3 Imaging Station
The GLS-1500 gives high quality ob-
Emphasising the benefits of laser scanning on site, you are
servations with effective and simple
not tied to a PC, you do not have to worry about power
field operation. With a scan range up to
and site work is easy because you are only dealing with one
330 m the GLS is a versatile tool that lets you work many
box. However you can always connect to the PC with the
different environments. The stand-alone capability of this
ScanMaster Software or Tablet with the ScanMaster Field
instrument easily manages the extremes of the measure-
software and see the data as it is being collected at up to
ment world.
30.000 points per second.
key features - GLS-1500
lConsistent 4 mm precision
lPrecise Scan Technology
l330 m maximum range
lClass 1 eye safe laser
lIntegrated camera
Imaging
key features - IS-3
lTwo Digital Cameras – Wide Angle and 30x optical zoom
liSCAN Technology – Intelligent Scanning up to 20 points p.s.
liDRIVE – touch screen control
l2000 m reflectorless measurement
liCONTROL – WiFi Remote Control by PC or Field Controller
IS-3 – Advanced imaging and high accu-
Fast iSCAN measurement routines enable a thorough data
racy – in one. Take the power, accuracy and
collection to define your subject in real-time data as ‘pho-
speed of the unsurpassed Topcon robotic
tography with dimension’. Options include Feature Detec-
technology, add our superb imaging capacity with 20 points
tion or Grid Scan to automatically measure significant points
per second scanning and 2 cameras, and you have the IS-3
or a "regular" grid defined by rectangle, polygon, section or
– a revolutionary approach to complete job site documenta-
complete 360°.
tion. Capture discrete points with images, or scan key features to get a clear overview of exactly what was measured
Topcon's IS-3 showcases our proven robotic technology. Its
and where.
wide angle dual digital Imaging cameras allow you to view
your data in-situ from a full colour, real-time image on a
With its exclusive coaxial 30x telescopic zoom, ImageMaster
touch sensitive LCD display. Navigate around your point and
software, Superior X-TRAC8 tracking technology and inte-
zoom in to measure up to 2000 m away, and be confident
grated WiFi robotic data communications – the IS-3 is the
that the point you see on the screen, is the point you see
most advanced, longest range, and most powerful imaging
through the telescope thanks to digital imaging precision
station of its time.
from Topcon.
IS-3 – Imaging Station
20
Software – Image Master / ScanMaster
ImageMaster / ScanMaster Office Software
Pictures and Pointclouds all in one loca-
3D data is turned into a snapshot of reality bringing your
tion! ImageMaster Pro is the revolutionary
project to life.
approach to get the full picture and mean-
ImageMaster Photo creates 3D models from stereo im-
ingfully represent your 3D data. Combining our proven soft-
ages from an “off-the-shelf” cameras & measured individual
ware based photogrammetric tools with the management
points and can quickly generate contour lines, points, poly-
of scanner and total station data; it enables you to read
lines and surface measurements-fast, powerful, effective
remotely sensed and physically measured information in a
and accurate.
single software environment. In one simple process, your
key features - ImageMaster
lEffective & simple desktop Photogrammetry with professional
quality output
lClear step-by-step interface
lMake your “Off-the-shelf” digital camera a measurement tool
lComplete Imaging data management – Combines Images,
points & pointclouds in a single software
lProduce models with accuracies up to 0.4 mm
Imaging
key features - ScanMaster
ScanMaster
ScanMaster – Office Software
lHigh volume scan and imaging data management
lIntuitive and User-friendly solution
lAutomated Data extraction
lMass 3D pointcloud acquisition and manipulation
lCompatible with many data formats
Let the points paint the picture!
Unique tools enable you to extract CAD information directly
ScanMaster is the fast, efficient way to handle mass 3D data
from the pointcloud, without requiring meshing or TIN crea-
and turn it into easy-read images that keep you and your
tion. Quickly extract sections, profiles, edges from regions;
customers, in the picture. The powerful GLS scanner control
plane intersection; quick polyline sketches. You can easily
and processing software offers a modern, streamlined inter-
prepare your data for presentation using slices, noise filter-
face giving the perfect alternative to traditional point-cloud
ing, re-sampling of clouds. ScanMaster covers everything
processing techniques.
you need to work with your point-cloud.
It’s so simple. ScanMaster has been designed to minimize
ScanMaster Field version is a stripped-down implementa-
the learning curve for the operator so that the data is the
tion designed for use on Tablet PC, this graphical interface
focus NOT the skills of the operator, your project receives
allows you to work with typical survey work-flows whilst
the best opportunity of being understood and showcasing
viewing your data in 2D spherical view or 3D data view.
your measurement expertise.
21
GNSS
Hiper II
GRS-1 RTK
DGNSS
GRS-1 DGNSS
FC-236 DGNSS
FC-25A DGNSS
Mobile Mapping
IP-S2 Compact
Laser Scanning
Feature Location
Roads
Engineering
Setting Out
Volume Calculations
Slope Stability
Process Plant Modelling
Mine and Quarries
Survey
Engineering
Deformation Control
Structural
Building Façade
Photogrammetry
Imaging
Continually Operating Reference Station
As-built
Geodetic
Applications
Measured Building
Hydrographic
Forensics
Archaelogical
Topographic
Cadastral
Control
Product Application Matrix GNSS
Product Application Matrix – Survey & Mapping
Construction
Optical
IS-3
MS AX
QSA
GPT-7500
GPT-3100N
DL-500
GR-5
NetG3A
GB-3
GLS-1500
22
23
Accident Reporting
Inspections
Property Damage Assessment
Survey of fly-tipping
Flood Risk Assessment
Damage Inspection
Habitat Studies
Asset Maintenance
Meter Reading
Housing Condition
Road Pavement Management
Locating Buried Infrastructure
Drainage System Management
Crop Management
Field Mapping
Power Pole Maintenance
Road & Pavement Condition Survey
Fire Perimeter Mapping
Archaeological Site Survey
Vegetation Survey
Storm Water Inlet Inventory
Cemetery Inventory
Municipal Assets Inventory
Governmental
Minefield Mapping
Wetlands Mapping
Forest Boundary
Facility Mapping
Centerline Review and Mapping
3D City Modelling
Homeland Security
Disaster Management
Visualisation
Product Application Matrix GIS / Mapping
Product Application Matrix – Survey & Mapping
Reporting
About Us
With over 75 years worth of experience in the manu-
Additionally, Topcon has produced the first and only
facture, distribution and support of products, Topcon is
available millimetre GPS + system, and the first to offer a
well placed to offer comprehensive support to cater for
true GNSS (Global Navigation Satellite System); dual fre-
all your needs.
quency, dual constellation, GPS plus GLONASS geodetic
grade receivers.
Established in 1932, the Topcon Group today is repre-
Investment in research and development leading to in-
sented by a workforce of over 6,000. Topcon develop,
novative new solutions and products is key to the Topcon
Topcon recently developed the technology to add Galileo
manufacture, sell, and provide services for a wide range
philosophy and is evident in a number of industry firsts
and Beidou 2 (Compass) in a new, state-of-the-art Uni-
of high technology products for the capture, analysis and
that include the first coaxial EDM total station, the GTS-1
versal Signal Tracking chip, ensuring total future-proofing
presentation of spatial datain the macro, micro and nano
and the unique GPT-7000i series imaging total stations
of investment.
worlds.
incorporating digital cameras.
www.topcon.eu
Your local authorized Topcon distributor is:
Telefon: 03641-366980 Mobil: 0172-3592559
Internet: W-VT.de E-Mail: [email protected]
* Designs and specifications are subject to change without notice.
T700EN - English - A
grafit-werbeagentur.de
Camburger Str. 86 - 07743 Jena