docGeneral_Valves~2007 - Winco Fluid Power, Inc.
download 
Report Transcription
General_Valves~2007 - Winco Fluid Power, Inc.
Heavy-Duty Valves for Extreme Environments AIRman, Inc. Creative Pneumatics Table Contents 1. AIRman, Inc. Cover 2. Table of Contents 3. Push/Pull Valves 4. 5. 6. 7. 8. 9. V1800104-SD Data Sheet V2500104 – Data Sheet V2510104 – Data Sheet V25E0104 – Data Sheet V3800104 – Data Sheet V3810104 – Data Sheet 10. Right Angle Solenoid Valves 11. V25006R05** * - Data Sheet 12. V25106R05** * - Data Sheet 13. V38006R05** * - Data Sheet 14 . V38106R05** * - Data Sheet 15. Inline Solenoid Valves 16. 17. 18. 19. 20. 21. B2400-692 – Data Sheet V1800605** * - Data Sheet V25006N05** * - Data Sheet V25106N05** * - Data Sheet V38006N05** * - Data Sheet V38106N05** * - Data Sheet 22. Double Solenoid Valves 23. V18006N06N** * - Data Sheet 24. V25006N06N** * - Data Sheet 25. V38006N06N** * - Data Sheet AIRman, Inc. Creative Pneumatics 26. Air Pilot Valves 27. D2510305 – Data Sheet 28. V2500305 – Data Sheet 29. V2510305 – Data Sheet 30. V3800305 – Data Sheet 31. V3810305 – Data Sheet 32. V2500705 – Data Sheet 33 . V3800705 – Data Sheet 34. V1800303 – Data Sheet 35. V2500303 – Data Sheet 36. V3800303 – Data Sheet 37. Combination Valves 38. 39. 40. 41. 42. 43. 44. V2500103 – Data Sheet V2510103 – Data Sheet V3800103 – Data Sheet V3810103 – Data Sheet V2500111DAL – Data Sheet V3800111DAL – Data Sheet B3800905DAL – Data Sheet 45. Accessory Valves 46. 47. 48. 49. 50. PPV (pressure protection) – Data Sheet CV (check valve) – Data Sheet SV2 (shuttle valve) – Data Sheet SV3 (shuttle valve) – Data Sheet QR(quick release) – Data Sheet 51056 Century Court, Wixom, Mi 48939 Phone: 248-960-1354 Fax: 248-960-5865 Website: www.airmaninc.com AIRman Inc. Creative Pneumatics Heavy duty push/pull valves designed for use in extreme operating conditions Product feature and benefits include: • Light weight rugged 6061 barstock aluminum • Ergonomic heavy duty knobs • Stainless steel knob extensions and fasteners • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Part number Description V1800104 1/8 npt, 5 port, 2 position, 4 way, push pull valve. V2500104 1/4 npt, 5 port, 2 position, 4 way, push pull valve. V2510104 1/4 npt, 3 port, 2 position, 3 way, push pull valve V25E0104 1/4 npt, 5 port, 3 position, 4 way, exhuast center, push pull valve. V3800104 3/8 npt, 5 port, 2 position, 4 way, push pull valve. V3810104 3/8 npt, 3 port, 2 position, 3 way, push pull valve. *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 A ORIGINATED 11/6/03 DC FUNCTION : 5/2 PUSH / PULL WITH SOFT DETENT MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 0.4 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150psi ELECTRICAL : VOLTAGE: CURRENT: 5/2 PUSH / PULL WITH SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/6/03 DC NA V1800104-SD DATA SHEET PG. 1 OF 1 A ORIGINATED 11/3/03 DC FUNCTION: 5/2 1/4 NPT PORTED VALVE SOFT DETENT MECHANICAL: MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL & BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ.: NA PRESSURE RANGE: MIN. VAC. MAX. 150 psi ELECTRICAL: VOLTAGE: CURRENT: 5/2 VALVE 1/4 NPT PORTS PUSH-PULL / SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/3/03 DC NA V2500104-SD DATA SHEET PG. 1 OF 1 A ORIGINATED 11/11/03 DC 1 FUNCTION : 3/2 PUSH / PULL SOFT DETENT 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL & BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi 2 ELECTRICAL : VOLTAGE: CURRENT: 3/2 PUSH / PULL SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/11/03 DC NA V2510104-SD DATA SHEET PG. 1 OF 1 1045 A ORIGINATED 11/5/03 DC A1 DETENT SYMBOL 11/13/06 DC FUNCTION : 5/3 PUSH / PULL W/ DETENT EXHAUST CENTER MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi ELECTRICAL : VOLTAGE: CURRENT: 5/3 PUSH / PULL W/ DETENT EXHAUST CENTER NOTE: KNOB IN = 1 TO 4 A1 24 315 CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/5/03 DC NA V25E0104 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/11/03 DC FUNCTION : 5/2 PUSH / PULL WITH SOFT DETENT MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi ELECTRICAL : VOLTAGE: CURRENT: 5/2 PUSH / PULL WITH SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/11/03 DC NA V3800104-SD DATA SHEET PG. 1 OF 1 A ORIGINATED 11/12/03 DC FUNCTION : 1 3/2 PUSH / PULL SOFT DETENT 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi 2 ELECTRICAL : VOLTAGE: CURRENT: 3/2 PUSH / PULL SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/12/03 DC NA V3810104 DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty right angle solenoid valves designed for use in extreme operating conditions Product feature and benefits include: Part number • Light weight rugged 6061 barstock aluminum • Low power draw solenoids rated NEMA 4X includes a LIFETIME GUARANTY against burnout • Stainless steel fasteners • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Description V25006R05** * 1/4 npt, 5 port, 2 position, 4 way, spring return, 12VDC. V25106R05** * 1/4 npt, 3 port, 2 position, 3 way, spring return, 12VDC. V38006R05** * 3/8 npt, 5 port, 2 position, 4 way, spring return, 12VDC. V38106R05** * 3/8 npt, 3 port, 2 position, 3 way, spring return, 12VDC. Voltage options ** DA – 12 VDC DB – 24 VDC AA – 120 VDC AB – 240 VDC Connector options * L – flying leads D – 3 pin din Please contact factory for quanities over 1,000pcs annually *External solenoid air pilot option for low pressure applications at supply port or dual supply circuits. “E” – Put E after 6 in part number (Example part number – V25006ER05DAL – 12 VDC with flying leads w/ external pilot) *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 A ORIGINATED 5/24/04 DC FUNCTION : 5/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS WWW.AIRMANINC.COM SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 5/2 SOLENOID / SPRING RESET INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 5/24/04 DC NA V25006R05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 8/2/06 DC 1 3 FUNCTION : 3/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi 2 ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 3/2 SOLENOID / SPRING RESET 2 3 1 INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 8/2/06 DC NA V25106R05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 11/11/03 DC FUNCTION : 5/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50psi MAX. 150psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATT FLYING LEADS 5/2 INTERNAL SUPPLIED SOLENOID SPRING RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/11/003 DC NA V38006R05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 5/25/06 DC FUNCTION : 1 3/2 INTERNAL SUPPLIED SOLENOID SPRING RESET 3 MECHANICAL : MATERIALS: ALUM. BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: PRESSURE RANGE: MIN. 55 psi MAX. 150 psi 2 ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 3/2 INTERNAL SUPPLIED 2 SOLENOID SPRING RESET 3 1 CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 5/25/06 DC NA V38106R05-DAL DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty inline solenoid valves designed for use in extreme operating conditions Product feature and benefits include: • Light weight rugged 6061 barstock aluminum • Low power draw solenoids rated NEMA 4X includes a LIFETIME GUARANTY against burnout • Stainless steel fasteners • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Part number Description B2400-692*** 1/8 npt, 2 port, 3 way, normally close, spring return, w/override. V1800605** * 1/8 npt, 5 port, 2 pos, 4 way, spring return, w/override, 12VDC. V25006N05** * 1/4 npt, 5 port, 2 pos, 4 way, spring return, w/override,12VDC. V25106N05** * 1/4 npt, 3 port, 2 pos, 3 way, spring return, w/override, 12VDC. V38006N05** * 3/8 npt, 5 port, 2 pos, 4 way, spring return, w/override, 12VDC. V38106N05** * 3/8 npt, 3 port, 2 pos, 3 way, spring return, w/override, 12VDC. Voltage options ** DA – 12 VDC DB – 24 VDC AA – 120 VDC AB – 240 VDC Connector options * L – flying leads D – 3 pin din *External solenoid air pilot option for low pressure applications at supply port or dual supply circuits. “E” – Put E after 6 in part number (Example part number – V25006ER05DAL – 12 VDC with flying leads w/ external pilot) *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 COPYRIGHT 1997 AIRMAN INC. A ORIGINATED 11/5/03 DC FUNCTION : 5/2 SOLENOID / SPRING RETURN INTERNAL PILOT SUPPLY MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 0.4 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50psi MAX. 150psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 2 WATTS FLYING LEADS 5/2 SOLENOID / SPRING RETURN INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/5/03 DC NA V1800605-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 4/4/06 DC FUNCTION : 5/2 INTERNAL SUPPLIED SOLENOID SPRING RESET WWW.AIRMANINC.COM MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 5/2 SOLENOID / SPRING RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 4/4/06 DC NA V25006N05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 8/2/06 DC 1 3 FUNCTION : 3/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi 2 ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 3/2 SOLENOID / SPRING RESET 2 3 1 INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 8/2/06 DC NA V25106N05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 4/4/06 DC FUNCTION : 5/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 5/2 SOLENOID / SPRING RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 4/4/06 DC NA V38006N05-DAL DATA SHEET PG. 1 OF 1 A ORIGINATED 6/13/07 DC 1 3 FUNCTION : 3/2 INTERNAL SUPPLIED SOLENOID SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 55 psi MAX. 150 psi 2 ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS FLYING LEADS 3/2 SOLENOID / SPRING RESET 2 3 1 INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 6/13/07 DC NA V38106N05-DAL DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty double solenoid valves designed for use in extreme operating conditions Product feature and benefits include: Part number • Light weight rugged 6061 barstock aluminum • Low power draw solenoids rated NEMA 4X includes a LIFETIME GUARANTY against burnout • Stainless steel fasteners • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Description V18006N06N** * 1/8 npt, 5 port, 2 position, 4 way, double solenoid, w/override. V25006N06N** * 1/4 npt, 5 port, 2 position, 4 way, double solenoid, w/override. V38006N06N** * 3/8 npt, 5 port, 2 position, 4 way, double solenoid, w/override. Please specify voltage and connector options when ordering. Voltage options ** DA – 12 VDC DB – 24 VDC AA – 120 VDC AB – 240 VDC Connector options * L – flying leads D – 3 pin din *External solenoid air pilot option for low pressure applications at supply port or dual supply circuits. “E” – Put E after 6 in part number (Example part number – V25006EN06ENDAL – 12 VDC with flying leads w/ external pilot) *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 FUNCTION : MECHANICAL : MATERIALS: SEALS: FASTENERS: MTG. STYLE: ASSY. LUBRICATION: FLOW: TEMP.: FILTRATION: SYSTEM LUBRICATION REQ'D.: PRESSURE RANGE: AA = 120 VAC AB = 240 VAC DA = 12 VDC DB = 24 VDC D = DIN COIL L = FLYING LEADS ELECTRICAL : VOLTAGE: CURRENT: A ORIGINATED 10/23/07 RW FUNCTION : 5/2 DOUBLE SOLENOID INTERNAL PILOT SUPPLY WWW.AIRMANINC.COM MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS VOLTAGE OPTIONS ** CONNECTOR OPTIONS * AA = 120 VAC D = DIN COIL AB = 240 VAC L = FLYING LEADS DA = 12 VDC DB = 24 VDC FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 55 psi MAX. 150 psi ELECTRICAL : VOLTAGE: SEE VOLTAGE OPTIONS CURRENT: SEE CONNECTOR OPTIONS 5/2 DOUBLE SOLENOID INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 10/23/07 RW NA V25006N06N-*** DATA SHEET PG. 1 OF 1 A ORIGINATED 10/23/07 RW FUNCTION : 5/2 DOUBLE SOLENOID INTERNAL PILOT SUPPLY MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS VOLTAGE OPTIONS ** CONNECTOR OPTIONS * AA = 120 VAC D = DIN COIL AB = 240 VAC L = FLYING LEADS DA = 12 VDC DB = 24 VDC FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50 psi MAX. 150 psi ELECTRICAL : VOLTAGE: SEE VOLTAGE OPTIONS CURRENT: SEE CONNECTOR OPTIONS 5/2 DOUBLE SOLENOID INTERNAL PILOT SUPPLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 10/23/07 RW NA V38006N06N-*** DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty single & double air pilot valves designed for use in extreme operating conditions Product feature and benefits include: Part number • Light weight rugged 6061 barstock aluminum • Stainless steel fasteners • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Description D2510305 Single air pilot 1/4 npt, 3 way diaphragm valve, used normally open or normally closed. V2500305 1/4 npt, 5 port, 2 pos, 4 way valve w/ 1/8 npt air pilot, spring return. V2510305 1/4 npt, 3 port, 2 pos, 3 way valve w/ 1/8 npt air pilot, spring return. V3800305 3/8 npt, 5 port, 2 pos, 4 way valve w/ 1/8 npt air pilot, spring return. V3810305 3/8 npt, 3 port, 2 pos, 3 way valve w/ 1/8 npt air pilot, spring return.. V2500705 1/4 npt, 5 port, 2 pos, 4 way valve w/ 1/8 npt dual air pilot, spring return. V3800705 3/8 npt, 5 port, 2 pos, 4 way valve w/ 1/8 npt dual air pilot, spring return. V1800303 Double air pilot 1/8 npt, 5 port, 2 position, 4 way, double air pilot valve. V2500303 1/4 npt, 5 port, 2 position, 4 way, double air pilot valve. V3800303 3/8 npt, 5 port, 2 position, 4 way, double air pilot valve. *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 FUNCTION : MECHANICAL : MATERIALS: SEALS: FASTENERS: MTG. STYLE: ASSY. LUBRICATION: FLOW: TEMP.: FILTRATION: SYSTEM LUBRICATION REQ'D.: PRESSURE RANGE: ELECTRICAL : VOLTAGE: CURRENT: A ORIGINATED 11/3/03 DC FUNCTION : 5/2 AIR PILOT / SPRING RETURN MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150 psi MIN. 55 psi PILOT PRESSURE AIRMAN, INC. WWW.AIRMANINC.COM ELECTRICAL : VOLTAGE: CURRENT: 5/2 VALVE 1/4 NPT PORTS AIR PILOT / SPRING RETURN CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/3/03 DC NA V2500305 DATA SHEET PG. 1 OF 1 A ORIGINATED 12/11/03 DC 1 FUNCTION : 3/2 AIR PILOT SPRING RESET 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150 psi 2 MIN. 50 psi AIR PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 3/2 AIR PILOT/ SPRING RESET 2 3 1 CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 12/11/03 DC NA V2510305 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/11/03 DC FUNCTION : 5/2 AIR PILOT SPRING RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi MIN. 55psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 AIR PILOT SPRING RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/11/03 DC NA V3800305 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/12/03 DC FUNCTION : 3/2 AIR PILOT / SPRING RESET 1 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150psi MIN. 55psi PILOT PRESSURE 2 ELECTRICAL : VOLTAGE: CURRENT: 3/2 AIR PILOT / SPRING RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/12/03 DC NA V3810305 DATA SHEET PG. 1 OF 1 A ORIGINATED 3/30/05 DC FUNCTION : 5/2 SHUTTLE AIR PILOT SPRING RETURN, FLOW IS FROM 1 TO 2 IN THE DE-ENERGIZED STATE MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS WWW.AIRMANINC.COM SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150si MIN. 50psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 SHUTTLE AIR PILOT SPRING RETURN 4 2 CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 51 3 3/30/05 DC NA V2500705-12 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/12/03 DC FUNCTION : 5/2 SHUTTLE AIR PILOT SPRING RETURN, FLOW IS FROM 1 TO 2 IN THE DE-ENERGIZED STATE MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150si MIN. 50psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 SHUTTLE AIR PILOT SPRING RETURN CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/12/03 DC NA V3800705-12 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/5/07 RW FUNCTION : 5/2 DOUBLE AIR PILOT MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 0.4 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150psi MIN. 30 psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 DOUBLE AIR PILOT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/5/07 RW NA V1800303 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/5/07 RW FUNCTION : 5/2 DOUBLE AIR PILOT MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150 psi MIN. 55 psi PILOT PRESSURE AIRMAN, INC. WWW.AIRMANINC.COM ELECTRICAL : VOLTAGE: CURRENT: 5/2 VALVE 1/4 NPT PORTS DOUBLE AIR PILOT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/5/07 RW NA V2500303 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/5/07 RW FUNCTION : 5/2 DOUBLE AIR PILOT MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi MIN. 55 psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 DOUBLE AIR PILOT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/5/07 RW NA V3800303 DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty combination valves designed for use in extreme operating conditions Product feature and benefits include: Part number • Light weight rugged 6061 barstock aluminum • Ergonomic heavy duty knobs • Stainless steel knob extensions and fasteners • Low power draw solenoids rated NEMA 4X includes a LIFETIME GUARANTY against burnout • Operating temperature range of –40 to 180 Description V2500103 1/4 npt, 5 port, 2 pos, 4 way push pull valve with air pilot reset. V2510103 1/4 npt, 3 port, 2 pos, 3 way push pull valve with air pilot reset. V3800103 3/8 npt, 5 port, 2 pos, 4 way push pull valve with air pilot reset. V3810103 3/8 npt, 3 port, 2 pos, 3 way push pull valve with air pilot reset. V2500111DAL 1/4 npt, 5 port, 2 pos, 4 way push pull valve with 12 VDC solenoid return. V3800111DAL 3/8 npt, 5 port, 2 pos, 4 way push pull valve with 12 VDC solenoid return. B3800905DAL 3/8 npt, 5 port, 2 pos, 4 way solenoid, spring return with push/pull latching manual operator. *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 A ORIGINATED 11/6/03 DC FUNCTION : 5/2 PUSH / PULL SOFT DETENT WITH AIR PILOT RESET MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS AIRMAN, INC WWW.AIRMANINC.COM SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC MAX. 150psi MIN. 55 psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 5/2 PUSH / PULL SOFT DETENT WITH AIR PILOT RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/6/03 DC NA V2500103-SD DATA SHEET PG. 1 OF 1 A ORIGINATED 2/16/04 DC FUNCTION : 3/2 PUSH / PULL SOFT DETENT 1/4 NPT AIR PILOT RESET 1 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL & BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi 2 MIN. 55 psi PILOT PRESSURE ELECTRICAL : VOLTAGE: CURRENT: 3/2 PUSH / PULL SOFT DETENT 1/4 NPT AIR PILOT RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 2/16/04 DC NA V2510103-SD DATA SHEET PG. 1 OF 1 A ORIGINATED 11/9/04 JB FUNCTION : MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS FINISHES: ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi ELECTRICAL : VOLTAGE: CURRENT: 5/2 PUSH-PULL / AIR-PILOT WITH SOFT DETENT CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/9/04 JB NA V3800103-SD DATA SHEET PG. 1 OF 1 PDF created with FinePrint pdfFactory trial version www.pdffactory.com 5/2 PUSH-PULL / AIR-PILOT WITH SOFT DETENT A ORIGINATED 11/12/03 DC FUNCTION : 1 3/2 PUSH / PULL 1/4 NPT AIR PILOT RESET 3 MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. VAC. MAX. 150psi MIN. 55psi PILOT PRESSURE 2 ELECTRICAL : VOLTAGE: CURRENT: 3/2 PUSH / PULL AIR PILOT RESET CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/12/03 DC NA V3810103 DATA SHEET PG. 1 OF 1 A ORIGINATED 11/11/03 DC FUNCTION : 5/2 PUSH/PULL SOL. RESET INTERNAL PILOT ONLY MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 50psi MAX. 150psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATT FLYING LEADS PUSH / PULL SOLENOID RESET INTERNAL PILOT ONLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/11/03 DC NA DATA SHEET PG. 1 OF 1 A ORIGINATED 11/19/03 DC FUNCTION : 5/2 PUSH/PULL SOL. RESET INTERNAL PILOT ONLY MECHANICAL : MATERIALS: ALUMINUM BODY & END CAPS SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: PANEL OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NA PRESSURE RANGE: MIN. 55psi MAX. 150psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATT FLYING LEADS PUSH / PULL SOLENOID RESET INTERNAL PILOT ONLY CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/19/03 DC NA DATA SHEET PG. 1 OF 1 A ORIGINATED 8/1/06 DC FUNCTION : 5/2 SOLENOID / SPRING / MANUAL MECHANICAL : MATERIALS: ALUM. BODY & END CAPS SS EXTENSION FINISHES: SEALS: LOW TEMP. NITRILE FASTENERS: STAINLESS STEEL MTG. STYLE: BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 2.2 Cv TEMP.: -40 TO 150°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: N/A PRESSURE RANGE: MIN.35 psi MAX. 150 psi ELECTRICAL : VOLTAGE: 12 VDC CURRENT: 5 WATTS 5/2 SOLENOID / SPRING / MANUAL WITH AIR OPERATED MANUAL OVERRIDE 4 2 5 1 3 CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 8/1/06 DC 1:2 B3800905-DAL DATA SHEET PG. 1 OF 1 AIRman Inc. Creative Pneumatics Heavy duty accessory valves designed for use in extreme operating conditions Product feature and benefits include: • Light weight rugged 6061 barstock aluminum (ball valves made of brass) • High flow • Silicone based lubrication that won’t wash away because of airline condensation • Operating temperature range of –40 to 180 Part number Description PP2** PP3** 1/4 npt pressure protection valve. 3/8 npt pressure protection valve. (**must specific closing pressure) CV 2 CV 3 1/4 npt check valve. 3/8 npt check valve. SV 2 SV 3 1/4 npt shuttle valve (double check). 3/8 npt shuttle valve (doublecheck). B2400-685 B2400-686 1/4 npt 3 way ball valve, 1 inch panel mount. 1/4 npt 3 way ball valve, 1/2 inch panel mount . QR 2 QR 3 QR 5 1/4 npt quick exhaust valve (quick release valve). 3/8 npt quick exhaust valve (quick release valve). 1/2 npt quick exhaust valve (quick release valve). *Please see data sheet for additional information* 51056 Century Court, Wixom, Mi 48393 Phone 248.960.1354 Fax 248.960.5865 A ORIGINATED 11/7/03 DC A1 FINISH 5/11/07 DC FUNCTION : ONE WAY RELIEF, ADJUSTABLE MECHANICAL : MATERIALS: ALUMINUM IN MODEL# PORT SIZE PP2** 1 4 NPT PP3** 3 8 NPT ** NOMINAL PRESSURE SETTING DEFINED AS THE PRESSURE AT WHICH THE VALVE BEGINS FLOW IN THE FORM OF BUBBLES. FULL FLOW OCCURS AT 5 PSI ABOVE NOMINAL AND BUBBLE TIGHT SHUTOFF OCCURS AT 5 PSI BELOW NOMINAL. CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/7/03 DC FINISHES: NATURAL SEALS: LOW TEMP. NITRILE FASTENERS: NA MTG. STYLE: PORT INLINE ASSY. LUBRICATION: SILICONE FLOW: 1.0 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NOT REQUIRED PRESSURE RANGE: MIN. 20 psi MAX. 150 psi ELECTRICAL : VOLTAGE: CURRENT: PRESSURE PROTECTION VALVE FEMALE NPT THREADS NA PP*** DATA SHEET PG. 1 OF 1 Creative Pneumatics A ORIGINATED 4/2/04 DC FUNCTION : 1.00 SHUTTLE VALVE 1/4 NPT PORTS 1.00 1 4 Ø.266 THRU (MOUNTING HOLE) NPT PORTS 3X 1.70 MECHANICAL : MATERIALS: ALUMINUM SEALS: LOW TEMP. NITRILE FASTENERS: MTG. STYLE: IN LINE OR BODY SIDE ASSY. LUBRICATION: HEAVY TRANSPORT SILICONE FLOW: 1.5 Cv TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NOT REQ'D PRESSURE RANGE: MIN. 50psi MAX. 150psi ELECTRICAL : VOLTAGE: CURRENT: SHUTTLE VALVE 1/4 NPT PORTS CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 4/2/04 DC NA SV2 DATA SHEET PG. 1 OF 1 FUNCTION : MECHANICAL : MATERIALS: FINISHES: SEALS: FASTENERS: MTG. STYLE: ASSY. LUBRICATION: FLOW: TEMP.: FILTRATION: SYSTEM LUBRICATION REQ'D.: PRESSURE RANGE: ELECTRICAL : VOLTAGE: CURRENT: A ORIGINATED 11/7/03 DC FUNCTION : QUICK EXHAUST MECHANICAL : MATERIALS: ALUMINUM FINISHES: BLACK ANODIZED SEALS: LOW TEMP. NITRILE FASTENERS: NA MTG. STYLE: LINE MOUNT OR BODY SIDE ASSY. LUBRICATION: SILICONE FLOW: 4.25 Cv (230 scfm @ 100 psi) TEMP.: -40 TO 180°F FILTRATION: 40 MICRON SYSTEM LUBRICATION REQ'D.: NOT REQUIRED PRESSURE RANGE: MIN. 5 PSI MAX. 150 PSI (5 PSI DIFFERENTIAL REQUIRED TO EXHAUST) MODEL# ELECTRICAL : VOLTAGE: CURRENT: PORT SIZE QR2 1 4 NPT QR3 3 8 NPT QR5 1 2 NPT QUICK RELEASE VALVE CONFIDENTIAL THIS DRAWING OR ANY PART THEREOF IS PROPRIETARY AND MAY NOT BE REPRODUCED OR COPIED WITHOUT WRITTEN CONSENT OF AIRMAN INC. 11/7/03 DC NA QR* DATA SHEET PG. 1 OF 1