EROWA self-centering vise

STANDARDIZATION
EROWA
self-centering
vise
System solution from
one single source
Clamps
with power
Do you do any milling with big
feed rates? Then you may well
want to have a closer look at this
powerful self-centering vise.
2
Also suitable for
f
heavy
cutting operations:
The self-centering vise 1
holds the blanks in posi
with a power of 16,000
selection of matching ja
provides additional stab
Simply practical!
ON
Standardization
EROWA self-centering vise
The SlipStop ® surface
f
prevents unhardened workpieces
from slipping off.
Holding power is more than
The arguments
Clamping power
16¨000 N at 60 Nm torque on
the spindle
Stability
Solid connection with the
chuck through P-centering
One body
Made from one single block
3
Clamps
with precision
When it comes to clamping your
workpieces, are precision and repeatability something you consider important? Then have a closer look at this information.
4
P-centering stands for
f
p
and precision. This high
cision interface guarant
reliable positioning on
EROWA chucks from ITS
MTS+.
ON
Standardization
EROWA self-centering vise
The entire body off the s
centering vise is made f
one single block. Stabili
and precision are built i
it were.
Flattened
l
d contours make
k ffor
optimal accessibility. The more machining can be done in
The arguments
Design
Stable design owing to a fully integrated pallet
Material
Corrosion-resistant, hardened material
Surfaces
Coated surfaces for a long
lifecycle
5
Clamps
with protection
Are the clamping elements regularly submerged by piles of chips
on your machines? The self-centering vise takes this with equanim i t y.
6
ON
Standardization
EROWA self-centering vise
Regardless off the amou
chips and dirt, the preci
spindle is well protected
No matter how
h
many chips
h
accumulate,
l
the
h self-centering
lf
vise will remain clean in the important places such as the
spindle and guide rails.
The arguments
Spindle
Protected and maintenancefree spindle
Slots
Covered slots
INOX
Made of corrosion-resistant,
hardened material
7
Clamps
with flexibility
Simple equals fast – fast equals lower costs – lower costs are a necess i t y. C h a n g e c l a m p i n g j a w s i n t h e
twinkling of an eye, and entirely
without any tools.
8
ON
Standardization
EROWA self-centering vise
The
h workpiece
k
is llifted
f d t
the required height wit
appropriate spacers. On
they are inserted, the sp
The
h self-centering
lf
vise with
h integrated
d pallet
ll
is set up while
h l
remain securely position
the machine is at work. As soon as the machine is ready, the
the self-centering vise.
whole unit is exchanged.
The arguments
Jaws
Rapid-change systems
without tools
Selection
Jaws for every kind of use
Ingenious spacers
Quickly inserted in fixed
positions
9
• Jaws in a variety of versions can be changed quickly
without any tools.
• Chip guard – simple but effective.
• Bilateral access for clamping and unclamping.
• Isolated and well-protected
precision spindle.
• Ingenious spacers
– quickly changed in
fixed positions.
• Hardened and corrosion-resistant with the greatest degree
of surface quality.
• 15 mm grid for jaw
positioning.
• Made out of one single
•Adjustable center
block. Pallet with EROWA P
(Production) centering.
The technology in detail
Clamping power at 60 Nm
16000 N
Repeatability
+/- 0.01 mm
Clamping stroke of the spindle
30 mm
Grid dimensions for jaw positioning
15 mm
Clamping mechanism
maintenance-free
Material
hardened, corrosion-resistant
Compatibility with EROWA tooling
systems
ITS, PowerChuck P,
PC210 Combi,
MTS Single Chuck
Options
Various jaws
Chip guard for profiles
Spacers of different heights
10
Chucking spigots for ITS or MTS
Torque wrench
5 - 155 mm
whatever suits your production processes in an optimal
w a y.
ER-070231
Self-centering vice w/o pallet
ER-067650
Self-centering vise 148P/i
Version
Corrosion-resistant material,
hardened and ground. Fully integrated ITS 148 P pallets
Application
On milling, grinding and EDM
centers
Note
Compatible with the following EROWA tooling systems: ITS,
PowerChuck P, PC210 Combi, MTS
Single Chuck
ER-067925
Jaws, H 13mm
ON
Select your accessories in peace and quiet, and then order
Standardization
EROWA self-centering vise
Version
1 pair of hardened, ground jaws
Application
To clamp workpieces on the EROWA
self-centering vise
Assembly
To be slid in
ER-067926
Jaws, H 24mm
Version
1 pair of hardened, ground jaws
Application
To clamp workpieces on the EROWA
self-centering vise
Assembly
To be slid in
ER-067929
Adapter for customized jaws
Version
1 pair of hardened, ground jaws
Application
Base for jaws specially made for
workpieces
Assembly
To be slid in
11
12
ER-069655
Soft jaws, steel
Version
1 pair of jaws, milled and drilled
Application
To be machined to special shapes
for workpieces to be clamped
Assembly
To be bolted to the adapter
ER-067929
ER-069656
Soft jaws, aluminium
Version
1 pair of jaws, milled and drilled
Application
Base for jaws specially made for
workpieces
Assembly
To be slid in
ER-068382
Pendulum jaw
Version
hardened, ground jaw with pendulum compensation for oblique
workpieces
Application
To clamp workpieces with oblique
outside surfaces
Assembly
To be slid in
ER-068381
Adapter for inserts, 5 mm
Version
1 pair of hardened, ground jaws
for SlipStop ® inserts
Application
For the reinforced clamping of
workpieces with fine surfaces
Assembly
To be slid in and tightened
Note
The SlipStop ® inserts are
exchangeable.
ON
Standardization
EROWA self-centering vise
ER-069884
SlipStop® insert riffled
Version
1 pair of hardened, ground
SlipStop ® inserts
Application
To replace worn inserts
Assembly
To be slid in the adapter for
SlipStop ® inserts ER-068381
ER-069885
SlipStop® insert ground
Version
1 pair of hardened, ground
SlipStop ® inserts
Application
To replace worn inserts from the
SlipStop ® jaws
Assembly
To be slid into jaws
ER-068380 or 068381
ER-068157
Spacers, H 8mm
Version
1 pair of hardened, ground spacers
Application
For the optimal height positioning
of workpieces on the self-centering
vise
Assembly
Insert into the jaws, then slide jaws
with spacers into the profile
ER-068158
Spacer set, H 8/12/16/20mm
Version
4 pairs of hardened, ground
spacers
Application
For the optimal height positioning
of workpieces on the self-centering
vise
Assembly
Insert into the jaws, then slide jaws
with spacers into the profile
13
ER-067169
Contamination cover
Version
1 plastic cover
Application
To protect the empty insert profiles
on the basis of the self-centering
vise
Assembly
To be slid in
ER-040999
MTS chucking spigot P
Version
One chucking spigot, including
attachment bolt and protective
cap.
Application
For the conversion of ITS pallet ø
148 into MTS pallet P ø 148.
ER-010742
Chucking spigot F/M
Production
14
Version
Fixed type, manual. Bolt 12.9,
without flushing hole.
Application
In pallets for chip-cutting
machining processes.
ER-043321
ON
Standardization
EROWA self-centering vise
H e x a g o n k e y, 2 . 5 m m
2.5 mm
Application
To set the lateral stop
ER-007768
H e x a g o n k e y, 3 m m
Application
To set the system center
ER-068025
Hexagon insert, 4mm
Application
To clamp and unclamp the
self-centering vise
ER-068026
To r q u e w r e n c h
Application
For a controlled clamping power of
the self-centering vise. We recommend a torque of 60 Nm
15
Take the next step.
Take that important next step. Contact an EROWA agency near you.
USA
Switzerland
Scandinavia
EROWA Technology, Inc.
North American Headquarters
2535 South Clearbrook Drive
Arlington Heights, IL 60005
Tel. 847 290 0295, Fax 847 290 0298
e-mail: [email protected]
EROWA AG
Knutwilerstrasse 3
CH-6233 Büron
Tel. 041 935 11 11, Fax 041 935 12 13
e-mail: [email protected]
www.erowa.com
EROWA Technology Scandinavia A/S
Fasanvej 2
DK-5863 Ferritslev Fyn
Tel. 65 98 26 00, Fax 65 98 26 06
e-mail: [email protected]
www.erowa.com
Germany
Spain
Italy
EROWA System Technologien GmbH
Gewerbepark Schwadermühle
Rossendorferstrasse 1
D-90556 Cadolzburg b. Nbg.
Tel. 09103 7900-0, Fax 09103 7900-10
e-mail: [email protected]
EROWA Technology Ibérica S.L.
Enamorados, 103. Local 5
E-08026 Barcelona
Tel. 093 265 51 77, Fax 093 244 03 14
e-mail: [email protected]
EROWA Tecnologie S.r.l.
S.S. 24 km 16,200
10091 Alpignano (TO)
Tel. 011 9664873, Fax 011 9664875
e-mail: [email protected]
Singapore
Eastern Europe
France
EROWA (South East Asia) Pte. Ltd.
CSE Global Building
2 Ubi View, #03-03
Singapore 408556
Singapore
Tel. 65 6547 43 39, Fax 65 6547 42 49
e-mail: [email protected]
www.erowa.com
EROWA TECHNOLOGY Sp. z o.o.
ul. Solskiego 44
52-416 Wrocław / Poland
Tel. 071 363 56 50
Fax 071 363 49 70
e-mail: [email protected]
www.erowa.com
EROWA Distribution France Sàrl
PAE Les Glaisins
12, rue du Bulloz
F-74940 Annecy-le-Vieux
Tel. 4 50 64 03 96, Fax 4 50 64 03 49
e-mail: [email protected]
India
China
EROWA Technology (India) Private Limited
No: 6-3-1191/6, Brij Tarang Building
Unit No-3F, 3rd Floor, Greenlands, Begumpet,
Hyderabad 500 016 (Andhra Pradesh)
India
Tel. 040 4013 3639, Fax 040 4013 3630
e-mail: [email protected]
www.erowa.com
EROWA Technology (Shanghai) Co., Ltd.
G/F, No. 24 Factory Building House
69 Gui Qing Road (Caohejing Hi-tech Park)
Shanghai 200233, PRC
Tel. 021 6485 5028, Fax 021 6485 0119
e-mail: [email protected]
www.erowa.cn
Japan
EROWA Nippon Ltd.
Shiba Shimizu Bldg.
2-3-11 Shiba Daimon, Minato-ku
105-0012 Tokyo
Tel. 03 3437 0331, Fax 03 3437 0353
e-mail: [email protected]
www.erowa.co.jp
EROWA Group Business Network: a member of ORENDA Holding Ltd.
Technical modifications reserved.
Registered trademark of EROWA AG; Copyright © EROWA AG; for a number of products of EROWA AG, patents have been granted or are pending.
EROWA AG 069997 e/06.10
Important matters require planning. And your next step is certain to
be an important decision advancing your company even further. We
will gladly support you during every step. You can profit from our
advice and practical experience in today’s modern and flexible manufacturing concepts.