1 ma14/ma14shseries - Concept Illumination
Transcription
1 ma14/ma14shseries - Concept Illumination
MA14/MA14SH SERIES MAYA - LED TYPE: CATALOG NUMBER: QUANTITY: FIXTURE PROJECT: WATTAGE VOLTAGE ELECTRICAL ELECTRICAL OPTION OPTION FINISH 3 4 5 6 OPTION ACCESSORIES OPTION MA14 1 2 MOUNTING 1- Cast aluminum LED board heat sink. 2- MA14SH: 30” Diameter hard aluminum optional shade. 3- Clear tempered glass lens. 4- Set of two cast aluminum supporting struts. 5- Black top sealed housing cover. 6- Cast aluminum top assembly base support with hinged mechanism. 7- 120/277V or 347/480V electronic driver power supply. 8- Lower cast aluminum houing with 4”-5” (102-127) O.D. pole adaptor. MA14SH 7 8 MATERIALS CERTIFICATION MayaLED is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED PC board is assembled on a thick pad housing chamber designed with a heat sink pattern to optimize heat dissipation and luminaire efficacy. The power supply is enclosed in a separate cast aluminum chamber allowing a quick access for electrical maintenance without disturbing the optical light chamber. LED PC board and optical lenses are protected from weather abrasion with a clear tempered glass to ensure optimal lighting performance. LED PC board is removable and replaceable for ease of maintenance or lighting upgrade. Tested to UL1598 and CSA22.2 #250. ETL listed for wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC/77ºF. Lumen depreciation in accordance with IESNA LM80 standards. CE Certification on request. Rated IP65. 17” (432) 30” (762) ELECTRICAL LED POWER SUPPLY 120/277V multi volt, or 347-480V (50-60Hz) with a 28” (711) minimum operating temperature of -40ºC/-40ºF. LED Type II-III-IV or VS light distribution with high performance optical lenses. Standard 4000ºK LED. LED system is available with three intensity levels of 46/61/96W. LIFE MA14 Luminaire less shade. EPA: 0.70 MA14SH Luminaire with SH optional shade. EPA: 1.13 80,000hrs (L70B50) based on LM-80 report for lumen maintenance (150,000hrs for model L42W60). FINISH MOUNTING Maximum weight: 28lbs (12.7kg) MayaLED is designed for ease of access and installation. The luminaire slides over the mounting plate, minimizing installation effort. Designed for wall or pole mount to fit with a 4” (102) pole (5” (127) on request). Alternate poles or wall attachments are proposed to meet multiple installation conditions. (Refer to page 3) LUMINIS Access to electrical components Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. MayaLED features a unique tool-less swing out shade assembly, allowing a quick access to luminaire maintenance, leaving a clean optical chamber to ensure a high lumen performance. June 2013 Rev 0 Five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. LUMINIS.COM 1 MA14/MA14SH SERIES Please visit our web site www.luminis.com for complete I.E.S. formatted download data. Refer to page 4 for additional information. MAYA - LED LUMINAIRE SELECTION LED LIGHT SELECTION MODEL# INPUT DELIVERED WATTS LUMENS 46W 61W 96W 3378 Lms. 5138 Lms. 7410 Lms. Type III 49W 62W 96W MA14 FINISH 120V 277V 347V 480V MA14SH MA14SH-L21W48-LD2 MA14SH-L42W60-LD2 MA14SH-L42W100-LD2 3847 Lms. 5210 Lms. 7368 Lms. MA14-L21W48-LD3 MA14-L42W60-LD3 MA14-L42W100-LD3 MA14SH-L21W48-LD3 MA14SH-L42W60-LD3 MA14SH-L42W100-LD3 Type IV 40W 60W 92W 3160 Lms. 4710 Lms. 6679 Lms. MA14-L21W48-LD4 MA14-L42W60-LD4 MA14-L42W100-LD4 MA14SH-L21W48-LD4 MA14SH-L42W60-LD4 MA14SH-L42W100-LD4 Type VS 47W 58W 95W 2970 Lms. 4445 Lms. 6332 Lms. MA14-L21W48-LD5S MA14-L42W60-LD5S MA14-L42W100-LD5S MA14SH-L21W48-LD5S MA14SH-L42W60-LD5S MA14SH-L42W100-LD5S MA14 1 STANDARD COLORS MODEL MA14-L21W48-LD2 MA14-L42W60-LD2 MA14-L42W100-LD2 Type II MA14SH VOLTAGE WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne OPTIONAL COLORS CS Custom color RAL RAL# color (Refer to color chart) NOTE: Above wattage values are based on 277V, tested at 25ºC ambient temperature. Wattage may vary by approx. +/- 10% for other voltages or changes in ambient temperature. Lumens output will remain constant. OPTIONS ELECTRICAL PH FS SP DC1 DM K2A K3L K5L MOUNTING Photocell Fuse Surge protector 10KV 120/277V Dynadimmer control 120/277 or 347/480V 0-10V Dimming driver (25% dimming) Amber LED for turtle sensitive areas Wavelengths: 584.5 nm to 597 nm 3000ºK CCT LED 5000ºK CCT LED ACA Pole mounted attachment with 45º support ACW Wall mounted attachment with 45º support EC3P Pole mounted twin arm attachment EC3PS Pole mounted twin arm attachment - short version (luminiare without shade only) EC3W Wall mounted twin arm attachment EC3WS Wall mounted twin arm attachment - short version (luminaire without shade only) ACCESSORIES LP LPC BLC SH High impact U.V. stabilized acrylic lens - 10% light loss Clear polycarbonate vandal resistant lens Back light control 30” Diameter aluminum shade (same color as luminaire) OPTION DETAILS DC1:Philips Dynadimmer™ is a step dimming control providing programmable schedules up to five different settings. The Dynadimmer™ uses the midnight point calculation to determine the absolute time between switching on/off time. Factory default settings: T1 (Time 1 on @ 4PM) D1 (Light level @ 100%) T2 (Time 2 @ 10PM) D2 (Light level step dimming @ 50%) T3 (Time 3 @ 4AM) D3 (Light level resumes to 100% until 6 AM.) Programmer tool unit for on site programming available on request. # DCR1. Other factory settings are available on request. June 2013 Rev 0 NOTES 1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photo cell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. LUMINIS.COM 2 MA14/MA14SH SERIES MAYA - LED POLE MOUNT 18” (457) 28” (711) 12” (304) 36” (914) 36” (914) 30” 17.75” (762) (451) 36” (914) 12” (304) 12” (304) Power feed Power feed ACA 1 1” X 3” extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) EC3P (Applicable with or without SH option) Set of (2) 1” X 3” extruded aluminum side pole straight mounting. Designed for luminaires with or less shades. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.97) Power feed EC3PS Set of (2) 1” X 3” extruded aluminum side pole straight mounting. Designed for MA12 luminaires only. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.72) NOTE 1: PCA Pole with ACA attachment requires a 30” (762) tenon extension over pole nominal height. EC3P and EC3PS require an 18” tenon extension. Factory installed. 8” Dia. (203) base. 2” Dia. (51) power entry 31.75” (807) 6” Dia. (152) bolt circle (3).625” Dia. (16) Mounting holes @120º PR7 8” Dia.(203) X 8.75” H (222). Extruded aluminum stand designed for short walls or pier mount. MATCHING POLE SELECTION Ø 4” Ø 5” Ø 4” Tapered Pole Ø 4” Height PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- PTA25 ------- 25 Ft. (7,6 M) ------- PSB Pole series PST Pole series PAA Pole series June 2013 Rev 0 For additional pole details, please refer to separate pole specification sheet. Ø 4”= 100mm Ø5”= 127mm LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. LUMINIS.COM 3 MA14/MA14SH SERIES MAYA - LED WALL MOUNT 28” (711) 18” (457) 11” (279) 36” (914) 36” (914) 36” (914) Power feed Power feed Power feed ACW 1” X 3” (25X76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC3W (Applicable with or without SH option) Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. Designed for luminaires with or less shades. Mounting EC3WS Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. Designed for luminaires less shades only. Mounting Mounting 3” (76) 3” (76) 4.625” (118) 6.125” (156) 3” (76) 4.625” (118) 6.125” (156) 4.625” (118) 17.75” (451) Power feed Power feed June 2013 Rev 0 Power feed LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. LUMINIS.COM 4 MA14/MA14SH SERIES MAYA - LED TYPICAL PHOTOMETRY SUMMARY TYPE II Iso Cd. plot Polar plot 2500 2000 90º 70º Iso Cd. plot Total Lms: 3378 Lumens Total Input Watts: 46W Total Efficiency: 73% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type II CRT: 4000ºK Polar plot 4000 3000 90º 70º Polar plot Total Lms: 7410 Lumens Total Input Watts: 96W Total Efficiency: 77% BUG Rating: B2-U0-G2 Cutoff Classification: 90º Full-Cutoff Distribution: Type II 70º CRT: 4000ºK 6000 4000 50º 50º MA14-L21W48-LD2 MA14SH-L21W48-LD2 Max. CP. 2495 @ 57.5º Iso Cd. plot Total Lms: 5138 Lumens Total Input Watts: 61W Total Efficiency: 84% BUG Rating: B2-U0-G2 Cutoff Classification: Full-Cutoff Distribution: Type II CRT: 4000ºK 50º MA14-L42W60-LD2 MA14SH-L42W60-LD2 Max. CP. 3936 @ 55º MA14-L42W100-LD2 MA14SH-L42W100-LD2 Max. CP. 5656 @ 55º TYPE III Iso Cd. plot Iso Cd. plot Polar plot 2000 1500 90º 70º Total Lms: 3847 Lumens Total Input Watts: 49W Total Efficiency: 79% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type III CRT: 4000ºK Polar plot 3000 2000 90º 70º 50º Iso Cd. plot Total Lms: 5210 Lumens Total Input Watts: 62W Total Efficiency: 84% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type III CRT: 4000ºK Polar plot Total Lms: 7368 Lumens Total Input Watts: 96W Total Efficiency: 76% BUG Rating: B1-U0-G1 Cutoff Classification: 90º Full-Cutoff Distribution: Type III 70º CRT: 4000ºK 4000 2000 50º MA14-L21W48-LD3 MA14SH-L21W48-LD3 Max. CP. 2097 @ 57.5º 50º MA14-L42W60-LD3 MA14SH-L42W60-LD3 Max. CP. 2836 @ 57.5º MA14-L42W100-LD3 MA14SH-L42W100-LD3 Max. CP. 4003 @ 57.5º TYPE IV Iso Cd. plot Polar plot 1500 1000 90º 70º Iso Cd. plot Total Lms: 3160 Lumens Total Input: 40W Total Efficiency: 78% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type IV CRT: 4000ºK Polar plot 2000 1000 90º 70º 50º Polar plot Total Lms: 6679 Lumens Total Input: 92W Total Efficiency: 72% BUG Rating: B1-U0-G1 Cutoff Classification: 90º Full-Cutoff Distribution: Type IV 70º CRT: 4000ºK 3000 2000 50º 50º MA14-L21W48-LD4 MA14SH-L21W48-LD4 Max. CP. 1387 @ 65º Iso Cd. plot Total Lms: 4710 Lumens Total Input: 60W Total Efficiency: 78% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type IV CRT: 4000ºK MA14-L42W60-LD4 MA14SH-L42W60-LD4 Max. CP. 2070 @ 62.5º MA14-L42W100-LD4 MA14SH-L42W100-LD4 Max. CP. 2934 @ 62.5º TYPE VS Iso Cd. plot Iso Cd. plot Polar plot 800 600 90º 70º Total Lms: 2970 Lumens Total Input Watts: 47W Total Efficiency: 63% BUG Rating: B2-U1-G1 Cutoff Classification: Full-Cutoff Distribution: Type VS CRT: 4000ºK Polar plot 1500 1000 90º 70º 50º Max. CP. 781 @ 70º Iso Cd. plot Total Lms: 4445 Lumens Total Input Watts: 58W Total Efficiency: 76% BUG Rating: B2-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type VS CRT: 4000ºK Polar plot 1000 50º 50º MA14-L21W48-LD5S MA14SH-L21W48-LD5S Max. CP. 1253 @ 67.5º Total Lms: 6332 Lumens Total Input Watts: 95W Total Efficiency: 67% BUG Rating: B3-U0-G1 Cutoff Classification: 90º Full-Cutoff Distribution: Type VS 70º CRT: 4000ºK 2000 MA14-L42W60-LD5S MA14SH-L42W60-LD5S Max. CP. 1813 @ 67.5º MA14-L42W100-LD5S MA14SH-L42W100-LD5S June 2013 Rev 0 Please visit our web site www.luminis.com for complete I.E.S formatted download data. All published photometric data are executed and certified by an independent testing laboratory. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. LUMINIS.COM 5