4” Slip-ON MUFFlErS

April 2011
1801-0506
1801-0500
1801-0502
1801-0508
1801-0510
1801-0505
4” SLIP-ON MUFFLERS
•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish
•Bolt to stock locations with supplied hardware
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 95-11 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS
WITH 2” STANDARD BAFFLES
1801-0506
1801-0504
1801-0500
1801-0502
1801-0508
1801-0510
Slant cut
Scalloped slash-cut
Straight cut
Slant down
Scallop slant-cut
Inverted billet insert
SUG. RETAIL
$489.95
499.95
469.95
489.95
499.95
499.95
PART #
DESCRIPTION
WITH 21/2” PERFORMANCE BAFFLES
1801-0507
1801-0505
1801-0501
1801-0503
1801-0509
1801-0511
Slant cut
Scalloped slash-cut
Straight cut
Slant down
Scallop slant-cut
Inverted billet insert
SUG. RETAIL
$489.95
499.95
469.95
489.95
499.95
499.95
ANDREWS PRODUCTS
We are proud to say that we have been partnered with the
Andrews company right from the start. Over the years their
product line has grown to include high-quality products
of all types including engine, drivetrain and electrical.
And while today their customers also include top Nascar
and Busch racing teams that demand the best, they have
never lost focus on their attention to detail, quality and
performance for riders who also demand the best.
“C” GRIND CAM FOR
48-69 BIG TWIN
•Best production cam made for big street engines
•Strokers from 84 to 96 inches will really turn on
this cam
•Broad torque range from 2,000 to 7,000+ rpm
PART #
DESCRIPTION
0925-0583
For 66-69 Shovelhead and 48-65 Panhead
GRIND
“C”
0928-0027
0928-0026
PUSHROD KITS
0928-0027
0928-0026
DESCRIPTION
SUG. RETAIL
$98.95
98.95
“N” GRIND CAMS
•Stock Knuckle replacement cam
•For stock motors and restoring an older classic engine, this is the cam to use
0925-0584
For 37-47 Knucklehead
DURATION @ .053
VALVE LIFT
37°
61°
61°
37°
278°
278°
.525
.525
•Biggest available fourcam set that does not
require head work;
however, some 82
engines may require
spring spacing
•Uses stock springs and provides
great mid-range and
upper-end power
•Use with 9.0:1 to 10.0:1 compression ratios for best power gain
NOTE: Tach drive gear must be removed from #4 cam on 81-E84 models.
CAMS FOR
KNUCKLEHEAD ENGINES
DESCRIPTION
CLOSE
“Y” CAMS
Aluminum
Chromoly
PART #
$145.95
OPEN
XL CAMS
•Pushrods fit Shovel engines using stock diameter tubing so
there is no cover tube interference
•Available in aluminum for quiet operation or chromoly for
maximum strength
PART #
FOR 66-84 SHOVELHEAD
Intake
Exhaust
SUG. RETAIL
SUG. RETAIL
PART #
DESCRIPTION
DS-199356
For 71-E84 XL
GRIND
“Y”
Intake
Exhaust
SUG. RETAIL
$407.95
OPEN
CLOSE
DURATION @ .053
VALVE LIFT
35°
53°
47°
29°
262°
262°
.425
.425
$163.95
“S” GRIND CAMS
•Bolt-in performance cam
•Smooth idle, strong pull to 6000 rpm
•This cam is the knuckle equivalent of a “B” cam in a Pan/Shovel motor
PART #
DESCRIPTION
0925-0585
For 37-47 Knucklehead
SUG. RETAIL
$163.95
“K” GRIND CAMS
“PB+” CAMS
•Perfect cam for stroked motors
•Strong pull to 6000 rpm
•This is the Knuckle equivalent of a “C” cam in a Pan/Shovel motor
PART #
DESCRIPTION
0925-0586
For 37-47 Knucklehead
GRIND
“N”
OPEN
CLOSE
SUG. RETAIL
DURATION @ .053
$163.95
VALVE LIFT
Intake
Exhaust
13°
47°
44°
16°
234°
240°
.348
.348
Intake
Exhaust
27°
55°
55°
27°
262°
262°
.370
.370
Intake
Exhaust
35°
63°
63°
35°
278°
278°
.368
.368
“S”
“K”
2
•Bolt-in four-cam set
•More horse power and torque
•Stock springs OK to 7000 rpm, requires
no headwork
PART #
0925-0593 For L84-85 XL
0925-0592 For 81-E84 XL
GRIND
PB+
Intake
Exhaust
SUG.
RETAIL
DESCRIPTION
$407.95
407.95
PART #
DESCRIPTION
0925-0591 For 71-80 XL
0925-0590 For 57-70 XL
SUG.
RETAIL
$407.95
407.95
OPEN
CLOSE
DURATION
@ .053
VALVE
LIFT
LIFT
@ TDC
34°
43°
40°
31°
254°
254°
.400
.410
.200
.192
SUPERVOLT
IGNITION COILS
2102-0204
•The original Andrews ignition coil
adds great performance with a classic look
•Replacement coils deliver 30,000+ volts
•2.8 ohm coil fits electronic ignition/dual fire
•4.8 ohm coil fits points ignition/dual fire
•Produce more voltage than a stock coil
•Sold each
PART #
DESCRIPTION
2102-0204
2102-0205
4.8 ohm coil, black
2.8 ohm coil, red
2102-0205
1201-0584
SUG. RETAIL
$62.95
62.95
1201-0583
1201-0588
BELT DRIVE TRANSMISSION PULLEY
•Machined from heat-treated, gear-quality steel
•Made in the U.S.A.
NOTE: May require some elongation of axle hole in swingarm or change in
belt length to allow for proper belt adjustment
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL 07-11 SIX-SPEED BELT DRIVE MODELS AND 06 DYNA GLIDE
1201-0584
1201-0587
31-tooth “Good Acceleration”
32-tooth Stock replacement
$137.95
137.95
1201-0583
1201-0586
1201-0589
31-tooth “Good Acceleration”
32-tooth Stock replacement
33-tooth “Overdrive”
137.95
137.95
137.95
1201-0582
1201-0585
1201-0588
31-tooth “Good Acceleration”
32-tooth Stock replacement
33-tooth “Overdrive”
147.95
147.95
147.95
FOR 94-06 BIG TWIN FIVE-SPEED BELT DRIVE MODELS (EXCEPT 06 DYNA GLIDE)
FOR 85-93 BIG TWIN FIVE-SPEED BELT DRIVE MODELS
1621-0302
1621-0301
1621-0303
ADJUSTABLE PASSENGER
floorBOARDS WITH MOUNTS
•The ultimate in passenger comfort; movement
of boards 2.5” forward eliminates the problem
of passenger’s calves pressing against saddlebag guard rail, also greatly
increases foot and leg support over stock boards
•Boards available in either classic steel or billet aluminum; all mounts are
CNC-machined from billet aluminum and triple chrome-plated
•Pads are made of anti-vibration neopene to ensure passenger comfort
•Adjust in seconds by pulling the spring-loaded locking pins
•Install easily without modification to the bike; no tools required
•Available for bikes with OEM or Rinehart exhaust
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH OEM EXHAUST
1621-0302
1621-0303
Classic steel boards
Billet aluminum boards
$379.95
429.95
FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH RINEHART
TRUE-DUAL EXHAUST
1621-0305
1621-0304
Classic steel boards
Billet aluminum boards
379.95
429.95
ADJUSTABLE
PASSENGER
FLOORBOARD MOUNTS
1621-0306
•Made from CNC-machined, billet aluminum, then
triple chrome-plated
•Accept either stock Harley-Davidson® floorboards or any direct-fit
accessory floorboard (floorboards not included)
•Adjust in seconds through a 9” range of motion; simply pull out springloaded lock pins, then move board up or down until pin clicks into next
position; no tools required
•Available for bikes with OEM or Rinehart exhaust
PART #
DESCRIPTION
FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
3902-0093
For 11 FLHTCUTG/FLHXXX models
1621-0301
1621-0306
For bikes w/ OEM exhaust
For bikes w/ Rinehart True-dual exhaust
$329.95
329.95
TRAILER HITCH FOR
H-D TRIKE MODELS
•Super-strong receiver type hitch fabricated from
laser cut steel, hand welded, then powder coated
•Bolts directly to frame in minutes
•Receiver is almost completely hidden and tongue installs easily using a
hitch pin and clip
•Hitch made to be used with or without Harley-Davidson’s optional
rear bumper
•Tongue and 17/8” ball are triple chrome plated
•Tongue height measures 11” to accommodate most trailers
•Includes plug-and-play wire harness and all necessary hardware
•Made in the U.S.A.
$299.95
3
DYNOJET
Most of you know that Dynojet is a world leader in the development and manufacture of
high performance accessories of all types. Their state-of-the-art facilities and technology
keeps them at the forefront of performance with new products constantly in the works.
We at Drag Specialties are proud to be able to bring you their latest offerings quickly and
easily so that you can keep your customers at the forefront of their fellow riders.
POWER VISION
•The quickest and most powerful flash tuner on the market
•The sophisticated, yet easy-to-use, 3.5” full-color touch-screen display mounts to handlebars with integrated Amps 4-hole
threaded inserts; also mounts to most mounts that feature Amps 4-mounting options, see page 1333 of the 2011 FatBook
•The display’s interface cable plugs directly to the bike’s diagnostic connector
•NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be
edited directly from the Power Vision
•Utilizes WinPV (Windows PC-based tuning application)
•Stores up to six different tunes that can be flashed to the bike
•Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an
editable copy and used as a starting point
•Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and
automatically sort hundred of applicable, dyno-proven tunes
•Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device
•Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG)
•AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve
•Checks and clears diagnostic codes
•Features adaptive trims and idle offset (with bike running)
NOTE: The Power Vision “marries” an individual ECM and may be used only on that bike for flashing the ECM. For this reason LeMans Corporation/
Drag Specialties does not take back Power Visions for any reason, used or not. All
returns and or adjustments must be made directly with Dynojet Research.
PART #
DESCRIPTION
SUG. RETAIL
The Power Vision may be used on any bike to read and clean trouble codes. 1020-1493 For all H-D models with Delphi ECM (except 11 Softails)
$549.95
FUELPAK
•Original version
which is not legal
for sale in CA
•Throttle position
sensor-based system simplifies
the process of fuel-injection tuning
•Enables you to fine-tune the fuel mixture throughout the entire rpm
range with the touch of a button
•Increases power and improves throttle response
•Very user friendly; plugs into the existing harness on the bike
•No computer or software is required, simply punch in the values supplied
with the Fuelpak
•Values supplied are for use with Vance & Hines exhaust systems
•Fuelpak will also work with other exhaust systems (contact V&H tech
support for tuning information)
•Includes all necessary mounting hardware
THROTTLEPAK™
THROTTLE
MANAGEMENT
SYSTEM
•Brings back the quick throttle response of cable
actuated throttles lost in throttle by wire (TBW)
•One twist of the throttle and riders will notice the improved response
and acceleration
•Works on any bike’s configuration; stock, modified and any
exhaust combination
•Possibly the easiest performance mod ever; installs in minutes, simply
plug into factory connectors
•Made in the U.S.A.
PART #
DESCRIPTION
1020-1525
All 08-11 H-D Throttle By Wire (TBW) models
SUG. RETAIL
$219.99
NOTE: Not legal for sale or use on pollution controlled vehicles.
NOTE: Requires the use of a high-performance air filter.
PART #
DESCRIPTION
1020-1521
For 11 FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL
$279.95
EFI POWER
PROGRAMMER
•Get riding quickly with
this fuel-management
unit and select the mode
that suits your style
•Plugs into existing wiring
using the
stock connectors
•Unlike most other fuel-injection programmers, this one is load-sensitive
•No laptop or software required
NOTE: Professional installation is recommended.
PART #
DESCRIPTION
1020-1491
For 08-11 XR1200/1200X
4
SUG. RETAIL
$359.95
OXYGEN SENSOR
ELIMINATOR KITS
1020-1395
AND ACTIVE
INTAKE AND EXHAUST
ELIMINATOR KIT
1020-1478
•Oxygen Sensor Eliminator Kits allow air/fuel ratio
1020-1479
changes for racing applications
•Active Intake and Exhaust Eliminator Kit is used to avoid setting a
diagnostic trouble code when installing some aftermarket air filters and
exhaust that require the removal of original equipment active systems;
for off-road racing use only
NOTE: Not legal for sale or use on pollution-controlled vehicles.
PART #
DESCRIPTION
OXYGEN SENSOR ELIMINATOR KITS
1020-1395 For 06-11 models (except 10-11 FLHR/FLHT/FLHX/
FLTR and H-D FL Trikes
1020-1478 For 10-11 FLHR/FLHT/FLHX/FLTR and H-D FL Trikes
ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT
1020-1479 For late-model European spec models w/ active
intake and exhaust
SUG. RETAIL
$24.95
34.95
29.95
COBRA FULLLENGTH SEAT
0801-0585
•A blast from the
past with true
“chopper” style
•Follows the flow
of your bike. It
has a little thicker
passenger area
•Top-grade black vinyl cover
•Base plate is powder-coated steel and carpeted to protect the fender
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 08-11 FLHT, FLHR, FLHX AND FLTR MODELS
0801-0587
Smooth seat
SUG. RETAIL
$314.95
VILLAIN SOLO SEAT
•A look unlike any other – will
transform the look of your bike
•Molded one-piece foam
foundation, covered with
premium-grade black vinyl on a
16-gauge (1.5mm) powder-coated
steel base plate
•Seat bottom carpeted to protect
the fender
•No pillion seat available
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE)
0802-0600
Smooth seat
0801-0584
AVIATOR
SOLO SEAT
•Design fills the
gap between the
Monterey solo
touring seat and
the Bare Bones
thin, low seat
•Top-grade black
vinyl cover
•Base plate is
powder-coated
steel and carpeted
to protect
painted surfaces
•Seating area is
13” W with 5” of
back support
•Pillion pad
sold separately
•Made in the U.S.A.
0801-0586
PART #
DESCRIPTION
FOR 08-11 FLHT, FLHR, FLHX, FLTR MODELS
SUG. RETAIL
$270.95
0801-0584
0801-0585
0801-0586
Smooth solo seat
Smooth pillion pad; 103/4” W
Smooth wide pillion pad; 13” W
SUG. RETAIL
$283.95
149.95
156.95
SOLAR
FOLD-DOWN LUGGAGE RACK
REFLECTIVE
EZ GLIDE III™
BACKREST ASSEMBLY
•Folds down from the sissy bar to create extra
storage space when you need it
•Hinges up against the back rest when not in
use for a clean look
•For use with OEM stock or “low” sissy bar side
plates on H-D rigid or detachable side plates
on models listed
•Measures 111/2” L x 81/2” – 51/2” W (tapered)
NOTE: Not for use with Küryakyn Sissy Bar side plates or Küryakyn Raptor
Sissy Bar.
PART #
DESCRIPTION
1501-0389 For 84-11 FXST (except FXSTD), 06-11 FLST (except
07-11 FLSTFSE, 07-11 FLSTF, 08-11 FLSTSB); 06-11 FXD
(except 08-11 FXDF, 09 FXDFSE), 04-11 XL
SUG. RETAIL
$159.95
SADDLEBAG/SIDE COVER
ACCENTS FOR TOURING
MODELS WITH HARD BAGS
DESCRIPTION
3501-0656
For 93-08 FLT, FLHT, FLHR, FLTR, FLHX
PART #
DESCRIPTION
0822-0154
EZ Glide III™ backrest assembly
SUG. RETAIL
$199.95
DELUXE NECK
COVER KIT
•Add brilliance to a dull area with these
smooth, quickly installed chrome covers
that shroud the neck and extend down
the frame
•Includes two snap-on down tube pieces
that add coverage almost all the way
down to the floorboard mounts
•Create a flowing, sweeping look with these
streamlined chrome accents
•Work with the contours of the saddlebags
•Designed to be used without saddlebag rails
•Peel-and-stick installation
•Sold as a set of six pieces
PART #
•Pad features solar-reflective leather in the contact
area and automotive-grade vinyl on the sides; patented process reduces
surface temperature by as much as 25°F for a cooler backrest, higher
durability and longer life over conventional leather or vinyl
•Sewn in zipper pouch on rear of pad
•Developed to be used in all Drag Specialties seats with EZ Glide II™
applications where a taller pad is desired
•Will also work in the passenger position on all Drag Specialties seats with
dual-backrest seat applications
•Backrest has a single lower detent for positioning in the seat; does not
adjust up or down on the bar
•Adusts fore-and-aft 2”; pivots and will fold forward
•All exposed metal parts feature a polished, nickel-chrome finish
•All internal hardware is zinc-plated to prevent rust
•14-gauge steel internal base plate
•Pad measures 10” W x 71/2” tall
•Made in the U.S.A.
SUG. RETAIL
$124.95
PART #
DESCRIPTION
0504-0194
For 95-07 FLHT, FLHR, FLTR, FLHX
SUG. RETAIL
$199.95
5
PERFORMANCE MACHINE
With more Trikes from “The Motor Company” rolling down the road every day,
it is great to have the folks at Performance Machine dreaming, designing and
building some of the hottest new products going for this lucrative market.
Their latest custom wheels and brakes are probably the first things you
think of, but remember that many of their other popular offerings for 2-wheel
Tourers look great and perform equally as well on the 3-wheelers.
DIFFERENTIAL-BORE FOUR-PISTON REAR CALIPER
•Caliper has differential bore pistons with dual-pad design
•Differential bore pistons apply different forces at both the leading and the trailing edges of the pad to ensure long life
•137 x 4B caliper design
PART #
DESCRIPTION
•Includes brake pads
1701-0379
For 08-11 FXSTB, FXSTC, FLSTF disc applications
•Made in the U.S.A.
4-PISTON REAR CALIPER/
BRAKE KITS FOR H-D FL TRIKE
•Combines Performance Machine’s proven 4-piston calipers
with integrated race technology of their master cylinders
•Stage 1 kit includes calipers, master cylinder
and brake line
•Stage 2 kit includes calipers, master cylinder, 11.5” brake
rotors and brake line
•Made in the U.S.A.
SUG. RETAIL
$549.95
1701-0378
1701-0377
NOTE: Stage II kits require use of 18” rear wheels.
PART #
DESCRIPTION
FOR 10-11 FLHTCUTG AND FLHXXX MODELS
1701-0377
SUG. RETAIL
Stage 1
$1,399.95
PART #
DESCRIPTION
FOR 10-11 FLHTCUTG AND FLHXXX MODELS (CONT)
1701-0378
SUG. RETAIL
Stage 2
$1,999.95
Trike rear wheel
Front wheel
WRATH CONTRAST CUT™ ONE-PIECE
ALUMINUM WHEELS
•These forged wheels place the highest material strength in the same
direction as the operating load, creating a light and strong wheel
•Contrast Cut™ finish starts with a polished wheel that has been black
anodized, then re-cut to open up the design
•Feature the contour rim lip for a graceful arc from rim to lip
•Made in the U.S.A.
NOTE: 09-11 FLHT, FLHR, FLHX, FLTR front applications require the use of
the OEM spacers.
DESCRIPTION
FRONT WHEELS
18” x 3.5” for 08-11 FLTR,
18” x 3.5” for 08-11 FLTR,
H-D FL trike w/o ABS
18” x 3.5” for 00-07 FLTR,
21” x 3.5” for 08-11 FLTR,
21” x 3.5” for 08-11 FLTR,
H-D FL trike w/o ABS
21” x 3.5” for 00-07 FLTR,
PART #
FLHT, FLHR, FLHX w/ ABS
FLHT, FLHR, FLHX,
FLHT, FLHR
FLHT, FLHR, FLHX w/ ABS
FLHT, FLHR, FLHX,
FLHT, FLHR
SUG. RETAIL
0201-1359
$1,349.95
0201-1357
0201-1361
0201-1358
1,299.95
1,299.95
1,449.95
0201-1356
0201-1360
1,399.95
1,399.95
DESCRIPTION
REAR WHEELS
LEFT/RIGHT PART #
15.5” x 5” for 09-11
H-D FL Trike models
18” x 5.5” for 09-11
H-D FL Trike models
15” x 7” for Lehman Renegade
conversion kits
Left
Right
Left
Right
Left
Right
0202-1577
0202-1577
0202-1578
0202-1578
0202-1579
0202-1579
SUG. RETAIL
$899.95
899.95
899.95
899.95
899.95
899.95
WRATH CONTRAST-CUT™ TWO-PIECE BRAKE ROTORS
•420 stainless steel outer band
•Machined Contrast Cut™ aluminum carrier
•Contrast Cut™ finish starts with a polished carrier that has been black anodized and then re-cut to open up the design
•Specifically designed for use with Performance Machine wheels
•Made in the U.S.A.
NOTE: 13” rotor will require the use of PM calipers designed for 13” rotors.
DESCRIPTION
PART #
SUG. RETAIL
FOR 00-11 MODELS (EXCEPT 08-11 DRESSERS. H-D FL
TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE FRONT)
11.5” rotor, front left
11.5” rotor, front right
6
1710-1225
1710-1225
$329.95
329.95
DESCRIPTION
PART #
SUG. RETAIL
FOR 00-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL
TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE)
13” rotor, front left
13” rotor, front right
1710-1226
1710-1226
$449.95
449.95
DESCRIPTION
PART #
SUG. RETAIL
FOR 08-11 FLTR/FLHT/FLHR/FLHX, H-D FL TRIKE
(FRONT ONLY), 06-11 DYNA (FRONT ONLY)
11.8” rotor, front left
11.8” rotor, front right
1710-1227
1710-1227
$329.95
329.95
POLISHED STAINLESS STEEL FLANGE WASHER SYSTEM
•This system cleans up the stamped flat edge and stepped look of standard flat washers when
used with Race Proof™ 12 Point flange bolt
•Every washer is specifically engineered for each size bolt with several key design features
•A precision counterbored hole is CNC-machined for the bolt to sit down inside of the washer –
when the bolt is installed in the washer the two flanges meet for an almost seamless look
•All washers also feature a tight tolerance hole with an i.d chamfer to clear the large under head radius on Race Proof™ bolts
•To achieve a highly reflective finish a large radius is machined on the edge of each washer – a radius will “shine” and reflect more light than a square edge
•Finally each washer is polished, by hand, to a perfect mirror finish
•Washers are available for the entire range of bolt sizes from 1/4” through 7/16” in a variety of diameters; conveniently packaged two or four to a pack with
7/16” x 1.062” washers also packaged in a 5-pack for belt sprocket applications
•Made in the U.S.A.
PART #
DESCRIPTION
2404-0490
2404-0491
2404-0492
2404-0493
2404-0494
1/4”
x .750” (4-pk)
1/4” x 1.00” (2-pk)
5/16” x .812” (4-pk)
5/16” x 1.00” (2-pk)
3/8” x .812” (4-pk)
SUG. RETAIL
$13.95
8.95
14.95
8.95
14.95
PART #
DESCRIPTION
2404-0495
2404-0496
2404-0497
2404-0498
2404-0499
3/8”
SUG. RETAIL
x .875” (4-pk)
7/16” x 1.062” (2-pk)
7/16” x 1.062” (5-pk)
1/4” x .750” (2-pk)
5/16” x 8.12” (2-pk)
$14.95
8.95
22.95
6.95
7.95
1013-0075
1013-0074
CHROME BRACKET
KITS FOR TUNED
INDUCTION AIR
CLEANERS
•Kits feature a support bracket
and breather system all in one
•Tuned induction air cleaners
1010-0563, 1010-0564 and
1010-0565 sold separately
(see 2011 FatBook, page 398)
•Made in the U.S.A.
PART #
DESCRIPTION
1013-0075
For 86-03 XL w/ Super E/G series carb
SUG. RETAIL
$257.95
PART #
DESCRIPTION
1013-0074
For 91-11 XL w/ stock CV carb & EFI
SUG. RETAIL
$257.95
SOLENOID END COVER/STARTER BUTTONS
•Beautiful T-6 billet aluminum replaces the OEM end cover
•Can be used as primary or auxiliary starter button
•Available in triple-plated show chrome or wrinkle black powdercoat finish
•Install in just minutes with OEM hardware
•For use with all 90-11 OEM starters and Terry Components 1.2kw or 1.4kw starters,
and 1.6kw or 1.8kw Super Slugger high-torque starters
•Made in the U.S.A.
PART #
DESCRIPTION
2110-0382
Chrome
SUG. RETAIL
$79.95
•Made of brown acrylic
•Features a stainless steel “bull nose” tip
DESCRIPTION
2105-0105
For 34-53 Indian Chief, Scout, 741
2110-0383
PART #
DESCRIPTION
2110-0383
Wrinkle black
SUG. RETAIL
$79.95
BRAKE AND
CLUTCH PEDAL
PAD SET
DISTRIBUTOR ROTOR
PART #
2110-0382
SUG. RETAIL
$13.95
•Set includes heel and toe
pad for clutch pedal and pad for rear brake pedal
•All pads made of black rubber
PART #
DESCRIPTION
1611-0031
For 34-53 Indian Chief and Scout
SUG. RETAIL
$16.95
BREAKER POINTS
•Includes following and stationary
contacts, stationary contact lock nut,
and cam lubricant; DOES NOT include
stationary contact mounting bracket
•Mounting hardware and instructions
also included
CONDENSER
•Zinc plate
•Features a long body and scalloped
mounting bracket just like the original
PART #
DESCRIPTION
2105-0104
For 34-53 Indian Chief, Scout, 741
SUG. RETAIL
$6.95
PART #
DESCRIPTION
2105-0102
For 34-53 Indian Chief, Scout, 741
SUG. RETAIL
$5.95
7
1510-0157
SADDLEBAG SUPPORT BRACKETS
•High-quality OEM-style replacements
•Chrome-plated finish
•Sold as a set of one left- and one right-side bracket
PART #
DESCRIPTION
3501-0612
For 09-11 FLHX, FLTRU and
FLTRX; repl. OEM #49206-09A
and 49207-09A
SUG. RETAIL
$119.95
FENDER
LUGGAGE RACKS
1510-0158
•Chrome-plated rack made of 3/8” steel tubing;
carries up to 10 lb.
•Mounts to stock seat mounting screw and
license plate bracket
•Mounting hardware and instructions included
PART #
DESCRIPTION
1510-0157
1510-0158
For 06-11 FLSTC
For 06-11 FXD w/ conventional license plate mount
SUG. RETAIL
$49.95
59.95
0214-0573
0214-0572
0214-0570
0214-0577
0214-0575
0214-0576
0214-0571
0214-0574
CHROME
AXLE KITS
•Bright chrome finish on axle
and hardware beautifies
your bike
•Machined from chrome-moly steel
•Kits include axle, spacers, nuts and washers
0214-0582
0214-0579
0214-0583
NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads.
PART #
FRONT
0214-0570
0214-0577
0214-0573
0214-0572
0214-0571
0214-0577
0214-0576
DESCRIPTION
For
For
For
For
For
For
For
86-99
84-87
67-71
49-65
36-47
84-85
77-83
SUG. RETAIL
FLST, FLSTF, FLSTN
FXR, 86-87 XL, 85-86 FXE/FXSB
FL
FL, 66 FL
Knucklehead, 48 FL
XL
XL, FX
$58.95
49.95
49.95
49.95
52.95
49.95
49.95
PART #
FRONT (CONT)
DESCRIPTION
0214-0575
0214-0574
For 73-77 XL, FX
For 52-72 XL, 71-72 FX
0214-0582
For 80-86 Big Twin 4-speed w/
belt drive (12.4375”)
For 58-66 FL (11.250”)
For 52-78 XL (10.9375”)
REAR
0214-0579
0214-0583
SUG. RETAIL
$49.95
49.95
49.95
52.95
49.95
TIRE MONITORING SYSTEM
•Monitors tire air pressure and temperature
•Measures air pressure from 10-70 PSI ( ± 2 PSI); also measures in BAR and KPA
•Reads internal air temperature from -220F - 1850F ( ± 50F); also reads in Celsius
•System includes a handheld remote transceiver with LED display,
two sensors that attach to the existing valve stems, tool set, stem nuts, batteries and instructions
8
PART #
DESCRIPTION
0363-0044
Tire monitoring system
SUG. RETAIL
$199.95
2040-0584
2040-0585
2040-0581
2040-0583
FENDER TIP LIGHTS
•These tip lights are a perfect fit on OEM and aftermarket front and rear fenders
•Clear fender light comes with amber and red bulb
•Replacement lenses available separately; see the 2011 FatBook
•Sold each
FRONT LIGHTS
PART #
DESCRIPTION
FOR 00-11 FLT, FLHT
2040-0581
SUG. RETAIL
Light w/ amber lens; repl. OEM
#68706-00 (DOT approved)
Light w/ smoke lens
2040-0585
$21.95
21.95
REAR LIGHTS
PART #
DESCRIPTION
FOR 09-11 FLT, FLHT
SUG. RETAIL
2040-0583 Light w/ red lens
2040-0587 Light w/ smoke lens
FOR 99-08 FLT, FLHT
$51.95
52.95
2040-0580 Light w/ red lens; repl. OEM #59672-99 (DOT approved)
REPL. REAR LENS ONLY
PART #
DESCRIPTION
FOR 99-08 FLT, FLHT
2040-0588
Repl. red lens (DOT approved)
21.95
SUG. RETAIL
$6.95
2040-0580
2040-0582
REPL. FRONT LENS ONLY
PART #
DESCRIPTION
FOR 00-11 FLT, FLHT
2040-0589
2040-0592
SUG. RETAIL
Repl. amber lens (DOT approved)
Repl. smoke lens
$6.95
7.95
PART #
DESCRIPTION
FOR 99-08 FLT, FLHT (CONT)
SUG. RETAIL
2040-0584 Light w/ smoke lens
$21.95
FOR 04-11 FLST
2040-0582 Light w/ red lens; repl. OEM #59683-03 (DOT approved)
2040-0586 Light w/ smoke lens
PART #
DESCRIPTION
FOR 99-08 FLT, FLHT (CONT)
2040-0591
21.95
21.95
SUG. RETAIL
Repl. smoke lens
$7.95
CHROME
TRANSMISSION
SIDE COVER
•Made from chrome-plated,
die-cast zinc
•Mounts with existing hardware
PART #
DESCRIPTION
1105-0035
For 07-11 FLT/FLHT/FLHR/FLTR/H-D FL Trike; 06-11
FXD, FXDWG; 07-11 FXST/FLST; repl. OEM #37116-06
SUG. RETAIL
$54.95
1105-0033
1105-0034
CHROME TRANSMISSION TOP COVERS
•High-quality OEM replacement covers
•Beautifully complements your other chrome engine and
transmission pieces
•Mount using existing hardware
PART #
DESCRIPTION
1105-0033 For 07-08 FLHT, FLHX, FLHR, FLTR; 07-08 FXST/FLST;
06-08 FXD, FXDWG; repl. OEM #34469-06A
1105-0034 For 01-06 FLHT, FLHTC, FLHR, FLTR; 00-06 FXST/
FLST; repl. OEM #34541-00
SUG. RETAIL
$49.95
49.95
CLUTCH SPRING
CONVERSION KIT
•Converts your diaphragm spring
clutch system to six coil springs
•CNC-machined billet pressure plate
•Ideal for stock to highperformance motors
•Allows for more precise
adjustment and
smoother operation
•Increases the holding capacity of
the clutch
•Includes two sets of coil springs to
provide three different pressure options
•Utilizes the stock clutch hub, shell and clutch plates
•Made in the U.S.A.
PART #
DESCRIPTION
1131-2051
For 98-11 Big Twin w/ hydraulic clutch
REPLACEMENT
HIGH-FLOW
AIR FILTER
•Washable and reusable; accordion design
provides high airflow with excellent filtration
•Ideal for extended use in dirty and dusty riding conditions
•Original K&N High-Flow Technology
•American-made for over 35 years
SUG. RETAIL
$209.95
PART #
DESCRIPTION
1011-2359
For 08-11 XR1200/1200X; repl. OEM #29377-08
SUG. RETAIL
$69.95
9
HOPPE INDUSTRIES
The originator of detachable fairing and audio combinations,
Hoppe continues to lead the way with fairing and audio
systems that look great, sound exceptional and provide
excellent coverage when rolling down the road. While
others have tried to jump on this bandwagon with imitations
and knock-offs, John Hoppe and wife Debbie make sure
they continue to lead the way with fresh new designs and
innovative ideas that riders are asking for.
ULTIMATE QUADZILLA
FAIRING WITH
STEREO RECEIVER
•An upgrade in style, sound and
wind protection
•Constructed of top-quality, hand-laid
fiberglass with a gloss black gel-coat
that’s ready to paint
•Upgraded Eclipse AM/FM/CD/
USB radio (50Wx4)
•Features include a Sirius Satellite
translator and tuner, three-band EQ,
USB connection, 3.5mm mini-jack
auxiliary input and patch cord, 12V
power socket, iPod® cable and plug and Bluetooth with mic
•Stereo comes completely assembled with marine-grade weather door with chrome door bezel and four 5” pre-wired black/chrome speakers
•Concealed internal antenna for a clean look
•Easy quick-detach connection to bike’s electrical system
•Radio hand controls
•Solid inner and outer windshield trim
•Three pouch storage bag
•Pre-wired for CB radio and accessories; additional audio adapter cable/s required, see COVERS, SECURITY & GENERAL section in 2011 FatBook
•Kits includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points
•Includes tinted air wings and 5” tinted windshield; will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some
drilling and trimming may be required)
•Made in the U.S.A.
PART #
DESCRIPTION
2330-0037
For 94-11 FLHR models (except FLHRS) w/ OEM quick-detach windshields
10
SUG. RETAIL
$3,995.95
QUADZILLA FAIRING WITH STEREO RECEIVER
•Classically styled fairing that delivers the ultimate in sound and wind protection
•Top-quality hand-laid fiberglass construction, gloss black gel-coated and ready to paint
•Includes Eclipse AM/FM/CD/USB radio (40W x4); features auxiliary input, three-band EQ and USB connection
•Stereo comes completely assembled with marine-grade weather door and four 5” pre-wired speakers
•Concealed internal antenna for a clean, uncluttered look
•Easy quick-detach connection to bike’s electrical system
•Kit includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points
•Includes a 12” clear windshield, will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some drilling and
trimming may be required)
•Made in the U.S.A.
PART #
DESCRIPTION
2330-0006
For 94-11 FLHR models (except FLHRS) with OEM quick-detach windshield
SUG. RETAIL
$1,695.95
XLS AUDIO BATWING FAIRING
•Superb wind protection and great-sounding audio with a classic style
•Constructed of hand-laid fiberglass making it stronger than ABS plastic and only 20 lb.
•Finished in gloss black gel-coat and ready to paint
•Includes two 6” marine grade speakers and amplifier
•3.5mm mini-jack MP3/auxiliary input port with detachable 3’ patchcord
•Includes 5” clear windshield
•Quick-detach power cord allows simple on and off in less than five minutes
•Fairing mounts to OEM windshield mounting points
•Made in the U.S.A.
NOTE: H-D quick-detach windshield bracket mounts and front directional relocation kit not included with fairing.
PART #
DESCRIPTION
2330-0036
For 00-11 XL w/ OEM quick-detach windshield mounts
SUG. RETAIL
$1,099.95
11
FEULING
With their wide-ranging expertise, the folks at Feuling are able to
offer complete camchest kits that provide maximum reliability,
peak performance and the coolest engine and oil temperatures
going in one single part number. No guess work and no trial-anderror. Just proven combinations of camplate, oil pump, cams,
pushrods, lifters and everything else needed for any engine
builder to get the most bang for the buck.
HP+® COMPLETE CHAIN DRIVE
CAMCHEST KITS
•All necessary components from top to bottom
of the camchest
•Each part works and functions together in total harmony
•Provides maximum reliability, peak performance and the
coolest engine and oil temperatures obtainable
•Includes HP+ oil pump, high flow camplate, Reaper camshafts,
fast-install pushrods, pushrod tube holder,
Timken® bearings, gaskets,
O-rings and ARP® hardware
•Choose from a 525 cam kit or a 574 cam kit; see below for
cam descriptions
525 CAMS
•Designed to increase torque band width and increase
fuel economy
•Great bolt-in camshaft upgrade for stock engines
•Produces strong low- and mid-range power with linear horsepower and torque curve
•Can be used with factory valve springs, pushrods and lifters
•Increases throttle response and eases starting
•1750-5800 rpm power range
0925-0534
574 CAMS
•Wicked power band for modified engines and an excellent bolt in for stock 96” engines; a great all-around camshaft with solid low end performance
and mind blowing mid- and top-end power
•Works best with modified cylinder heads, increased compression ratio, performance
PART #
DESCRIPTION
SUG. RETAIL
exhaust and intake systems
FOR 99-06 TWIN CAM (EXCEPT 06 DYNA GLIDE)
•Performance valve springs required on 99-04 engines and performance
0925-0533
525 cam kit
$1,595.95
pushrods and lifters recommended
0925-0534
574 cam kit
1,595.95
•2000-6800 rpm power range
1111-0012
1111-0011
TOURING FRAME STABILIZERS
•CNC-machined aluminum, stainless steel HIEM joints and
stainless mounting hardware
•Prevent frame flex, frame wobble and motor oscillation
•Improve handling and overall safety
•Top-side design provides for a quicker, easier installation
•Work with stock exhaust and most aftermarket exhaust systems
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 09-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKES
1111-0011
1111-0012
12
LICENSE
PLATE BAR
ELIMINATOR
SUG. RETAIL
Polished
Black anodized
$159.95
149.95
April 2011
| 9901-1016
•Preserve the stock saddlebag support brackets
when removing the license plate support tube
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
2030-0559
For 97-08 FLT/FLHT
SUG. RETAIL
$29.95