Flange roll former

Flange roll former
Roll former for flanges
Machines to makes ducts assembly directly from sheet metal, thanks
to 2 forming stations for heights of 20 and 30 mm
Several profiles are available depending on roll forming machine
(TDCJ, TDFJ, PDF1, PDF1Super, PDF2 or PDF3)
Model PDF
PDF
TDCJ
TDFJ
Model TDCJ
Features
Number of stations
Capacity steel S235JR (mm)
Power supply (V) - Motor power (kW)
Dimensions (L x l x h) (mm)
Weight (kg)
PDF 1
SUPER
PDF 2
PDF 3
PDF1
PDF1 SUPER
PDF2
PDF3
14
18
18
27
TDCJ
12
0,5 - 1,25
0,5 - 1,25
0,5 - 1,25
0,5 - 1,25
0,6 - 1,25
400 3-Ph.- 2,2
400 3-Ph.- 2,2
400 3-Ph.- 5,5
400 3-Ph.- 7,5
400 3-Ph.- 2,23
3 500 x 1 200 x 1 560
4 300 x 1 200 x 1 560
4 300 x 1 200 x 1 560
6 400 x 1 030 x 1 600
1 300 x 3 000 x 950
2 000
2 500
2 500
3 500
290
Duct folding machine
This folding machine is designed to bend ducts
with formed profiles type TDCJ/TDFJ and PDF,
maxi height 35 mm.
•Strong frame steel construction
•Notch gauge for bend positioning
•Table and folding beam adjustable motorizes
segments for forming ducts with TDCJ /
TDF flanges
•Electric clamp and folding beam
•Automatic cycle
•Graduated angle gauge
•Alignment guide to enable easy and
precise positioning of the metal sheet
before folding
Features
Useful length (mm)
Capacity soft steel S235JR (mm)
Duct section mini in 3 and 4 faces (mm)
Weight (kg)
Motor power (kW)
PGC2040
PGC3050
2040
3050
1,5
180 x 180
1,5
230 x 230
1 436
2 330
1,5
1,5
Notch gauge between segmented table and
segmented folding beam
TDCJ range
Corner notcher
Consisting of 5 notchering heads, 2 are
designed for Pittsburgh or Snaplock corner notcher,
and 3 are designed to realise folding notches.
The notcher heads are adjustable along the machine
length. The hydraulic system is setting on the structure
of the machine. The notcher control allows only one worker
operation thanks to the pedal. Each head is equipped with a sluice
(or gate) to thrown out of gear separately
Maxi notching length 3 m, mini inter axial 100 mm.
SertiCorner
Automatic system to install and crimp corners for duct industry
Features
Thickness range soft steel (mm)
Cycle time
Compressed air need
Required space (L x l x h) (mm)
Weight (kg)
Power supply (V)
Corner SH
Corner DH
0,56 - 1,20
0,56 - 1,20
3 s per angle
3 s per angle
6 bars
6 bars
920 x 920 x 3 226
920 x 920 x 3 226
375
375
230 1-ph.
+ pneumatic
230 1-ph.
+ pneumatic
SertiCorner
Z profile beader
Z profile beader RAID
The Z sheets profiling is the best solution for the duct manufacturing metallic sheet work.
Replacing the old “diamond point”, being more efficient, more attractive, the Z straining
gives a superior rigidity which allows reducing the sheet thickness
320 mm
RAID2515
Features
RAID2515
RAID3015
2 515
3 015
Capacity soft steel S235JR (mm)
1,5
1,5
Speed (m/min)
20
20
400 3-ph. - 2,2
995
400 3-ph. - 2,2
1 310
Useful width (mm)
Power supply (V) - Motor power (kW)
Weight (kg)
Adjustable entry guide rear
Flange roll former
Flange forming machine: RF20/30
This machine was designed for corners
automatic production in insulation industry.
Profile shapes may differ according to
request and further to precise technical
specifications
Insertion of metal strips is done manually
(slope 20 mm or 30 mm) on basis model
The optional automatic version of the
machine enables to shape corner directly
from coil with automatic cut by sawing
thanks to a programming system managing
the flow and the length
Features
RF20/30
Corner height (mm)
20 and 30
Capacity soft steel S235JR (mm)
Forming stations
Power supply (V) - Motor power (kW)
Weight (kg)
Options
0,5 - 0,8
17 stations
400 3-Ph.- 5,5
2 000
Duct seamer: AGRAF-GAINE
Machine designed to seam rectangular ducts by
double seam before setting up added corner
AGRAF-GAINE
AGRAF-GAINE12
Dimensions of the duct (mm)
Features
150 x 150
250 x 250
Capacity soft steel S235JR (mm)
0,5 - 1,0
0,6 - 1,2
Speed (m/min)
Adding material (mm)
Power supply (V) - Motor power (kW)
Dimensions (mm)
Weight (kg)
15
10
8 - 16
8 - 16
400 3-Ph.- 5,5
400 3-Ph.- 7,5
4 520 x 820 x 1 100
4 520 x 820 x 1 100
1 200
1 500
Jouanel Industrie S.A. | Z.A. des Saulniers | 37800 Sainte-Maure-de-Touraine | France
Tel. : +33 247.654.067 - Fax : +33 247.655.161 | [email protected] | www.jouanel.com
With the aim to keep on improving its machinery, Jouanel reserves its right to modify machinery features at any time.
Jouanel Industrie S.A. | 10 2013
Flow automatic system including:
•Mobile overhang decoiler, maximum weight of the coiler: 850 kg
•Sawing automatic cutting system, minimum length of corner 500 mm, maximum length
of corner 3000 mm as standard (other possibilities on special request)
•Control command, programming length and quantities
•Unloading table, ejection table and stackable device of corner on the way out after cutting
•Injection system, to fit tightness filling product directly in the profile