Machinery - Siegel Bros.

BALDOR 7" DELUXE BENCH GRINDERS
BALDOR B" BENCH GRINDERS
The Baldor 7" Deluxe model features
capacitor start, capacitor run motor.
Won't burn out even if repeatedly overloaded. Plenty of room to grind large,
odd shaped pieces. Standard equipment on this unit includes lighted eye
shields wired through switch, water pot
and tool tray mounted on swivel type
arm, 2 pole switch mounted in base.
Includes two 7" x 1" X 5/8 " grinding
wheels (one 36 grit, one 60 grit).
The Baldor 6" Bench grinder is built for rugged heavy duty grinding. This
model features a 113 HP split phase motor; versatile, removable wheel
guards and covers; two piece tool rest adjustable for angle grinding;
Standard equipment: Two 6" x %" x 112" grinding wheels (one 36 grit, one
60 grit).
Part No.
HP
BAL612
Volt
PH
115
RPM
Wheel
Center
Dist. (in.)
3450
12114
BALDOR B" DELUXE BENCH GRINDERS
The Baldor Deluxe models feature capacitor start, capacitor run motors won't burn out even if repeatedly overloaded. The extra wide clearance
between wheels permits grinding of large, odd shapes. Versatile, removable wheel guards and covers enable unit to be used as buffer or grinder.
Exhaust-type guards accommodate 2" diameter vent pipes. Standard
equipment - Two 6" X %" x 112" grinding wheels (one 36 grit, one 60 grit),
power cord.
Part No.
HP
BAL623E
Volt
PH
115
RPM
Wheel
Center
Dist. (in.)
3450
14%
Part No.
HP
Volt
PH
RPM
Wheel
Center
Dist. (in.)
BAL7307D
V2
115/230
1
3450
16%
BALDUR 8" DELUXE BENCH GRINDERS
Baldor 8" Deluxe Grinders feature capacitor start, capacitor run motors won't burn out even if repeatedly overloaded. Features; lighted eye shields
wired through the switch. Extra heavy
%" shaft, with oversize 206 ball bearings. Heavy cast iron base and exhaust
guards. Water pot and tool tray mounted on swivel-type arm for convenient
use. Includes two 8" x 1" X %" grinding wheels (one 36 grit, one 60 grit).
Part No.
HP
BAL8107WD
Part No.
BAL712
50
HP
Volt
115
PH
RPM
Wheel
Center
Dist. (in.)
3450
16%
PH
RPM
115/230
1
3450
17%
BALDOR 10" DELUXE BENCH GRINDERS
• Ideal grinders for industrial plant or
toolroom use
• Single-phase units feature Baldor
permanent split capacitor motorwon't burn out even if repeatedly
overloaded
• Features lighted-type eye shields wired
through switch on single phase units
• Water pot and tool tray mounted on
swivel-type arm for convenient use
BALDOR 7" BENCH GRINDERS
This unit features a capacitor start, capacitor run motor - won't burn out
even if repeatedly overloaded. It's built tough for heavy duty grinding.
Extra wide clearance makes long, odd shapes easy to grind. The cast
iron tiltable tool rest is perfect for angle grinding. The opening on the
exhaust guard accommodates 3" vent pipe. Standard equipment includes 2 - 7" X 1" X 5/8 " grinding wheels (one 36 grit, one 60 grit).
Volt
Wheel
Center
Dist. (in.)
• Wheel-center distance 18"
• Wheels: 10" x 1" X W', 1 - 36 grit, 1-60 grit
• U.L. Listed/CSA Certified
• Designed to comply with OSHA standards under normal usage
• Single-phase units have 2-pole switch mounted in base, factory
connected for 115 volts
• No switch on 3-phase units
• Painted industrial grey
Part No.
HP
Volts
Ph.
HZ
Idle
RPM
Wheel
Width
BAL1022WD*
BAL1021WD
1
115/230
208-230/460
1
3
60
60
1800
1800
1"
1V2
*U.L. Listed/not CSA Certified
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
1"
BALDUR HEAVY·DUTY 12" PEDESTAL GRINDERS
BALDOR HEAVY·DUTY 14" PEDESTAL GRINDERS
• Ideal for jobs requiring a powerful, allpurpose grinder
• Manual starter, with overload protection,
conveniently mounted on grinder
• Speed of 1800 rpm provides desired
cutting speed-5400 surface feet per
minute for tool grinding and most
production
• Heavy 1%" diameter shaft, oversize 208
ball bearings
• Motor diameter 73f4"-allows plenty of
working room for grinding long, oddshaped pieces
• Wheel-center distance is 23 5/8"
• Accommodates wheels 12" x 2"
• Designed to comply with OSHA standards
under normal usage
• Wheel guards cast iron exhaust type, opening accommodates 5" vent
pipe
• Painted industrial grey
• Pedestal & accessories optional
Part No.
HP
BAL1215W
BAL1217W
2
2
Volts
Ph. HZ
208-230/460 3
115/230
1
60
60
Idle RPM
Wheel Width
1800
1800
2"
2"
BALDUR CARBIDE TOOL GRINDERS
• Specially designed for jobs requiring faster than normal cutting speed
• Easily handles production jobs and tool grinding
• Plenty of power and overload capacity when needed
'14" wheels travel at speed of approximately 6300 surface feet per
minute
o Heavy 1%" diameter arbor; extra heavy duty 309 ball bearings
o Magnetic starter with overload and undervoltage protection
conveniently mounted on grinder
• Wheel-center distance 29"
• Accommodates wheels 14" x 3"
• Designed to comply with OSHA standards under normal usage
• Exhaust type guards accommodate 5" vent pipe
o Painted industrial grey
• Pedestal and accessories optional
Part No.
BAL1406W
HP Volts Ph.
HZ
Idle RPM
Wheel Width
230
60
1800
3"
5
3
BALDUR TILTABlE AND STATIONARY BELT GRINDERS
3 positions-vertical, 45 degree tilted, horizontal
• Offers the ultimate in grinding flexibility
o Ideal for rough grinding, deburring,
deflashing, polishing and finishing
°W2 HP motor especially designed by
Baldor for extra-high torquesdevelops up to 3 HP; totally-enclosed,
fan-cooled, ball bearing construction
o Grinding rate of 6,300 surface feet per
minute provides powerful cutting
action, fast material removal and
self-cleaning
• Unique belt guard for operator safety-doesn't interfere with grinder
versatility
• Pedestal optional
• Belt tracking accomplished by manual adjustment on idler wheel for
setting belt in any desired position
o Single-phase model has off/on switch
• 7" diameter serrated contact wheel
o Belts are 2" wide, 48" long, 80 grit; easy belt change in seconds
o Rugged, high quality construction backed by a 3 year warranty
o U.L. listed
.1
• Costs considerably less than larger units-yet delivers the same type
of high-quality grinding
• Dynamically balanced for smooth, vibration free operation
• Grinder has reversing switch-permits sharpening of either left or
right-hand tools
• Single-phase grinder powered with Baldor permanent split capacitor
motor; no moving parts-won't burn out even if repeatedly
overloaded
• Three-phase grinder features heavy-duty, squirrel-cage type motor
o Wheels closely mounted to ball bearings; have husky 314" diameter
shaft
• Flanges on both sides of grinder for 6" diameter cup wheels, 1W'
deep, recessed 4" diameter-steel backed with 11f4" hole
• Mounting provisions for silicon carbide, aluminum oxide and diamond
wheels
• Adjustable lamp swings to each wheel; Protractor-type tool support
sits in slot of big 12" x 6%" tool tables
• Water pot with spout conveniently mounts over either wheelan
support provided with both guards
• Painted industrial grey
Part No.
BAL500
BAL51 0
HP
Volts
Ph.
V2
115
208-230/460
1
V2
3
HZ
60
60
Idle RPM
3600
3600
Part No.
HP
Volts
Ph.
HZ
Idle RPM
BAL248-151 TD
BAL248-153TD
1 V2
115/230
208-230/460
1
3
60
60
3600
3600
1V2
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631.. 242.. 8555 • FAX: 631.. 667.. 8869
51
COMBINATION BELT &DISC SANDER
BALDOR GRINDER PEDESTALS
B
A
• Takes 6" x 48" belts, 12" discs
• Belt operates horizontally, vertically or at any angle in between
• Positive settings at 45° and 90 0
• Easy to read tilt scale
• Quick change belt tension lever
• Belt tracking adjustments easily made with special adjustment knob
• Belt guard is designed to allow use of full belt length
• Two ground, cast iron tilting tables with mitre gauge slots
• Belt table: 12Vl' x 7", Oisc table: 16W' x 10"
• Both tables tilt to 45°
• Mitre gauge included
Belt
Size
Disc
Dia.
6"x48"
12"
Part No.
BOS70855
HP
C
Part No.
Key
BALGA16
A
6/1, 7/1, 8/1, & 10" Grinders, V4 HP thru 1V2 HP
BALGA14
BALGA20
B
Belt Grinders
Formed steel, for 6", 7/1, 8/1 & 10" Grinders
8/1,10",12/1 & 14/1 Grinders & Belt Grinders
C
Use With:
BALDOR MAGNETIC STARTERS-THREE PHASE, fULL VOLTAGE
CONTROL
208-230 Volts. Specify voltage when ordering.
Motor
Voltage
NetWt.
(Ibs.)
115/230-1 Ph
150
BALDUR INDUSTRIAL DUST CONTROL UNITS
• Complete with hoses, fittings and brackets
• Easily mounts on existing Baldor Grinder
pedestals
• Built with heavy guage steel housing and
powerful self-cleaning material handling
fan
• Totally-enclosed, fan cooled industrial
motor
• Single-phase motor has switch, cord and
plug
• Equipped with an air-control valve
• Comes with economical, reusable cloth
filter bag
• Quiet operation-83 OB, "A" scale weighing-taken at the operator's
position
• Cloth filter bag is chemically treated, flame retardant
• Compact-only 24/1 from back of grinder over filter bag
Grinding Wheel
Maximum
Dia.
Width
Part No.
BALOC?
BALOC8
BALOC10
BALDC12
BALOC14
?"
.
52
1"
8"
1/1
10"
12"
14"
1"
2"
3"
Total
Cap'y
Cubic Ft./Min.
Required Per
Wheel By OSHA
440
440
440
440
700
220
220
390
390
590
Part No.
Grinder Wheel Size
10/1
12/1
BALGA50A10
BALGA51A*
*Price includes allowance for omission of standard starter.
BALDOR TOGGLE SWITCH (3 POLE)-THREE PHASE
For 7", 8/1 and 10" Grinders. 208-230/460 volts. Specify voltage when
ordering.
Description
Part No.
BALGA12A
Baldor Toggle Switch
CALL FOR COMPLETE
SPECIFICA TIONS ON OUR FULL LINE
OFME~LWOR~NGMACfflNERY
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
"
These high quality, economical drill presses offer the same rugged dependability as
presses costing many times these low prices. All of our drill presses feature a 90 day limited
warranty* and can be serviced at anyone of our authorized service centers throughout the
United States.
Features:
.. Hinged metal belt and pulley cover
coupled with quick adjustment motor
mount allow rapid changing of spindle
speeds
• Rotating, tilting crank operated work table
with quick release clamp
• Motor and frame included
• Conveniently located on/off switch
• Quality drill chuck and key included
• Quick adjustment depth gauge and stop
.. Slotted work table and base
• Adjustable spindle return spring
BENCH MODELS
Part No.
Swing
Drill Cap'y
Chuck Size
Spindle Travel
Spindle Distance to Table
Table Size
Table Tilt
Column Diameter
Spindle Speeds
Motor
FLOOR MODELS
Part No.
Swing
Drill Cap'y
Chuck Size
Spindle Travel
Spindle Distance to Table
Table Size
Table Tilt
Column Diameter
Spindle
Motor
JET354164
JET354166
14"
5/s "
20 112"
1"
5/S "
3/4 "
3%"
4%"
18%"
16Vs"
±45°
29Vs"
12%"
±45°
2%"
16
%HP
2231bs.
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-667-8869
3%"
12
1V2 HP
331 Ibs.
53
""'''".""~"""",, ~~~-'''-I~
"
~PMSTI 10" TABLE SAW
This versatile saw is suitable for wood, plastic, aluminum and similar materials. It
features a 20" precision table with 10" extension wings on both sides to allow
extension ofthe rip fence to 25" for ripping a full sheet of plywood. Rip fence has
a fingertip control of Vis" and the front guide rail is graduated from 0"-25" and is
equipped with a positive lever lock. Saw cuts range from 2Ya" at 45 degrees to
3Ve" at 90 degrees. Mitre gauge permits cuts to 60 degrees.
Specifications:
Saw Blade Diameter:
Arbor Diameter:
Maximum Depth Of Cut:
Maximum Rip To Right Of Blade:
Maximum Rip To Left Of Blade:
Maximum Depth Of Cut At 45 Degrees:
Table In Front Of Saw Blade At Maximum Cut:
Maximum Width Of Dado:
Table Height:
Table Size (With Extensions):
Table Size (Without Extensions):
OAL Dimensions (Maximum):
Spindle Speed:
Motor with Magnetic Control Switch:
Standard Equipment Includes:
• 1V2 HP Motor with Manual Overload Reset
•
•
•
•
•
Extension Wings
All Electrics
Front Guide Rail
Rear Guide Bar
Table Insert
Net Weight:
Shipping Weight:
• Blade Guard with Anti-Kickback
Attachment
• o/e" Bore and V-belt
• Arbor Pulley
• Motor Pulley
10"
5/a "
3Va"
25"
15"
2Va"
12'/2"
1311s"
36"
27"D x 40"W
27"D X 20'I4"W
40"H x 50"W x 36"D
4,500 RPM
11/2 HP, 1 Ph, 115/230V
(Prewired 115V)
2321bs.
2481bs.
Part No.
Description
JET708512
10" Table Saw with Stand
~PM~nI 12" TABLE SAW
This versatile saw is suitable forwood, plastic, aluminum and similar materials. It
features a 20" precision table with 10" extension Wings on both sides to allow
extension of the rip fence to 25" for ripping a fUll sheet of plywood. Rip fence has
a fingertip control of Vis" and the front guide rail is graduated from 0"-25" and is
eqUipped with a positive lever lock. Maximum depth of cut at 45 degrees to 3Ve".
Mitre gauge permits cuts to 60 degrees.
Specifications:
Saw Blade Diameter:
Arbor Diameter:
Maximum Depth Of Cut:
Maximum Rip To Right Of Blade:
Maximum Rip To Left Of Blade:
Maximum Depth Of Cut At 45 Degrees:
Table In Front Of Saw Blade At Maximum Cut:
Table Height:
Table Size (With Extensions):
Table Size (Without Extensions):
OAL Dimensions (Maximum):
Spindle Speed:
Motor with Magnetic Control Switch:
Net Weight:
Shipping Weight:
Standard EqUipment Includes:
• 1V2 HP Motor with Manual Overload Reset
•
•
•
•
•
Extension Wings
All Electrics
Front Guide Rail
Rear Guide Bar
Table Insert
54
• Blade Guard with Anti-Kickback
Attachment
• %" Bore and V-belt
• Arbor Pulley
• Motor Pulley
12"
5/a "
4V4"
25"
l1lh"
3Ve"
10V2"
37V2"
27"D x 40"W
27"D X 20V4"W
43"H x 50"W x 40"D
4,350 RPM
1V2 HP, 1 Ph, 115/230V UL
(Prewired 115V)
2571bs.
2671bs.
Part No.
Description
JET708513
12" Table Saw with Stand
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
~PM5TI 10" TILTING ARBOR TABLE SAW
These tilting arbor table saws are heavy duty, rugged
tools designed to produce accurate, precise work for
cabinet makers and the construction industry. The boxtype body is made of steel plate and all moving parts are
enclosed to ensure safe operation. The large table is
equipped with extension wings for large workpieces and
the spindle is supported by a 1-piece housing incorporating 2 enclosed precision ball bearings. The spindle
moves vertically with the right handwheel control and tilts
up to 45 degrees with the left handwheel control. The
motor on this saw is equipped with 3 V-belts to transmit
smooth, balanced power. Its rip fence can be used on
either side of the saw blade and there are guide rails
fastened to the front and rear of the table. The front guide
rail is calibrated to show the distance between the set
fence and the saw blade.
Standard Equipment Includes:
• 3 HP Motor With Cover
• Magnetic, 24V Low Voltage Controls
• Fence
.. Mitre Gauge (Graduated 30 Degrees to 90 Degrees with
stops at 45 Degrees and 90 Degrees
.. Spanners
.. Table Insert
.. Splitter with Guard
.. 2 Extension Wings
• Dust Collector Opening
Specifications:
Saw Diameter:
Arbor Hole Diameter:
Maximum Depth of Cut:
Maximum Rip to Right of
Blade:
Maximum Rip to Left of Blade:
Maximum Thickness of Cut
at 45 Degrees:
Table in Front of Saw Blade
at Maximum Cut:
Maximum Width of Dado:
Table Height:
Table Size (With Extensions):
Table Size (Without
Extensions) :
OAL Dimensions (Maximum):
Spindle Speed (RPM):
Motor with Magnetic Control
Switch:
Net Weight:
Shipping Weight:
Part No.
Description
JET708520
10" Tilting Arbor Table Saw
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-667-8869
10"
5/8 "
3"
2Va"
12"
116"
13
34"
36"Wx27"D
20"Wx27"D
40"0 x 46"W x 361f2"H
4,200
3 HP, 1Ph, 230V
3651bs.
5301bs.
55
~PM~£TJ:
PORTABLE HORIZONTAL/
VERTICAL BANDSAW
This three speed band saw can be used horizontally or
vertically as a cut off saw for metal, wood or plastic. With
the vertical work table in place you can cut shapes and
contours as well as do routine notching and slitting. Features include adjustable ball bearing guides, heat treated
steel worm gear, bronze wheel gears, constant oil bath,
45 0 angle vise and automatic shut off.
Part No.
JET414455
~PM~TJ:
Standard Equipment Includes:
• % HP Motor
• Chip Brush
• Coolant System
• Adjustable Stock Stop
• Vertical Saw Table
• Blade
• Blade Guards
• Instruction Manual
.
56
Horizontal
Capacity
Round
Square
4112"
4%"
X
Blade Size
Motor
6"
COMBINATION HORIZONTAL/
VERTICAL BANDSAW
This compact mobile combination bandsaw can be used
horizontally or vertically. This saw features a UL listed
motor and switch, hydraulic downfeed, heavy cast iron
table, rapid approach swiveling angle vise which cuts up
to 45 degrees, coolant system, material stop, roller cabinet, automatic shut-off after cut, hardened and ground
worm gears and adjustable roller blade guides.
Specifications:
Capacity7"
Round:
Rectangle:
7" x 12"
7"
Throat Depth:
Vertical Worktable:
9%" x 20"
45 degrees
Vise Tilts:
Blade Size:
%" x .032" x 93"
85, 130, 180, 285
Speed Range:
SFPM
Motor:
% HP, 1 Ph, 115/230
(Prewired 115V)
Floor Space Required:
49V2" x 17V2"
Net Weight (approx.):
2751bs.
Shipping Weight:
3521bs.
Part No.
Description
JET414457
HorizontalNertical Bandsaw
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
.JET METAL CUTTING VERTICAL HANDSAWS
EQUIPMENT & TOOLS
These heavy duty machines are perfect for shop or production work. Cuts
ferrous, non-ferrous and plastics. Variable blade speeds for maximum
versatility. Non-stop blade speed changing system. Tilt,ing work table for
angle cuts. Other features include: Built in blade welder and grinder,
blade tension indicator, overload magnetic starter, blade guard elevating
handwheel and low voltage controls.
Standard Equipment Includes:
• Motor with Complete Controls
• Blade welder with grinder and shear
• Ribbed table
• Saw blade
·Worklamp
• Chip blower
• Adjusting tools
• Operators manual
Specifications:
JET414494
Part No.
Cutting Capacity (in.)
Thickness
9%
15%
Width
Speeds (FPM)
66-2360
Table size (in.)
24x22
129
Blade Length (in.)
Table Tilt
Max Blade Width (in.)
5/8
2 HP, 3 Ph
Motor:
230/460V
Prewired 230V
Net Wt. (Ibs.)
902
Ship Wt. (Ibs.)
1002
.JET POWER HACKSAW
EQUIPMENT & TOOLS
This versatile power hacksaw features a very reasonable price, combined with rugged performance you'll appreciate. It comes with a 1/2 HP,
1 Ph 115/230V motor, prewired for 115V. Cutting capacity is 6" round and
6" x 6" square. Good for angle cuts to 23;4" at 45 degrees. Saw blade
dimensions: 14" Lx 1" W.
• Heavy all-cast construction
• Dry cut
• Adjustable hydraulic blade lift
• Automatic shut-off
• Swivel vise
• Adjustable work stop
• 4 Casters for easy movement
Part No.
Description
JET414417
Jet Power Hacksaw
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-667-8869
57
12"/315MM 2 SPEED COLD SAW
The CS315D Cold Saw is perfect for medium size jobs with the capacity to cut up to
3Y2" square tubing and 2" solid material.
The powerful 1.5 HP motor, combined with
slow blade speed produces smooth, burrfree cuts and leaves a milled finish. The
cold sawing process virtually eliminates
heat, minimizing distortion to the workpiece. The built in flood coolant system
keeps the workpiece cool and maximizes
blade life. Easily makes 45° miter cuts left
or right. Saw comes ready for bench
mounting with single mechanical vise. Additional mechanical vise, air vises (in lieu of
mechanical vises) and floor stand available
as optional equipment. Also available in
semi-automatic configuration or fully automatic.
Part No.
Capacity
Round
90 0
45 0
Square
90 0
45 0
Rectangle
90 0
45 0
Solids
90 0
Motor
Voltage
H.P.
Blade Speed*
Net Wt. (Ibs.)
CS315D
3%"
3%"
3 1/2"
3"
23/4" X 4"
2%" x 2%"
2"
220-3-60
1.5
23/46 RPM
340
*Low speed for stainless steel; High speed for cold
rolled steel.
14"/350MM COLD SAW
The CS350D Cold Saw easily handles
those larger jobs such as 4" square tubing,
23/4" solid material (at 90°) and 4" pipe.
Powerful1Y2 HP motor combined with steel
worm gear provides smooth, efficient cutting action. High speed steel blade, rotating at low RPM and built in, flood coolant
system provides smooth, burr-free cuts at
low temperature. Easily makes accurate
miter cuts to 45° left or right. Includes single, quick acting mechanical vise and precision machined table and back fence. Additional mechanical vise or air vises (in lieu
of mechanical vise) and floor stand also
available. Also available in semi-automatic
configuration or fully automatic.
58
Part No.
Capacity
Round
90 0
45 0
Square
90 0
45 0
Rectangle
90 0
45 0
Solids
90 0
Motor
Voltage
H.P.
Blade Speed*
Net Wt. (Ibs.)
CS350D
4112"
4112"
4"
3%"
33/8" X 5 5/16"
3%" x 3%"
23;4"
220-3-60
1.5
21/42 RPM
340
*Low speed for stainless steel; High speed for cold
rolled steel.
880 MEEKER AVE • BROOKLYN; NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
15%"/400MM 2 SPEED COLD SAW
The CS400B 15%" Cold Saw provides all
the power necessary for those really tough,
big jobs. Large blade diameter handles up
to 5Va" round shapes and up to 3" solid
materials. Powerful 1.5 HP motor and steel
worm gear transmits maximum power to
the high speed steel blade. Built in flood
coolant system and low blade RPM combine for fast, smooth cutting action, leaving
a burr-free cut with a milled finish. Head
rotates 45° R or L with positive stops at 45°
for accurate mitering. Includes single mechanical vise and base ready for bench
mounting. Additional mechanical vise or
air vises (in lieu of mechanical vise) and
floor stand available. Also available in
semi-automatic configurations or fully automatic.
14"/350MM NON-FERROUS COLD SAW
The CSNF350 is designed specifically for
cutting aluminum, brass and other nonferrous metals. The high blade speed,
combined with a specially ground carbide
tipped blade produce burr-free cuts with a
milled finish. The single mechanical vise
holds the work firmly in place for accurate
cutting. The head swivels 45° R or L with
positive stops at 45° for accurate mitering.
Equipped with floor stand and carbide
blade. Additional mechanical vise or air
vise (in lieu of mechanical vises) also available. Available semi-automatic or fully automatic.
,.,
CS400A
Capacity
Round
90 0
45 0
Square
90 0
45 0
Rectangle
90 0
45 0
Solids
90 0
Motor
Voltage
5Ve"
4%"
45/16"
3%"
4" x 55/16"
4" x 33/4"
3"
H.P.
Blade Speed*
Net Wt. (Ibs.)
230-3-60
1.5
2%2 RPM
340
*Low speed for stainless steel; High speed for cold
rolled steel.
Part No.
Capacity
Round
90 0
45 0
Square
90 0
45 0
Rectangle
90 0
45°
Solids
90 0
Motor
Voltage
H.P.
Blade Speed
Net Wt. (Ibs.)
CSNF350
4"
3%"
4" X 5 5/16"
4" X 3V2"
4"
230-3-60
3.0
3400 RPM
272
COLD SAW ACCESSORIES
COLD SAW BLADES
~
Part No.
BHOBO
High quality Cold Saw Blades made of AISI
M-2 high speed steel and hardened to 62-64
Rc. Blue oxide coating reduces brittleness
and galling. May be resharpened up to 20
times giving these blades a long service life.
Part No.
Diameter
(mm/in)
No. of
Teeth
CSB315200
CSB350180
CSB350220
CSB400180
CSB400240
315/12.4
350/13.8
350/13.8
400/15.7
400/15.7
200
180
220
180
240
I!l
Part No.
CSS10400
CSV10600
CSV10700
CSV10800
~
Key
A
B
C
C
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-661-8869
~
Description
Floor Stand
Mechanical Vise
Single Air Vise
Double Air Vise
59
12" ABRASIVE CUT OFF SAWS
,
16" - 18" ABRASIVE CUT OFF SAWS
Made in USA!
\
These heavy-duty saws handle 2W' solid round stock (3/1 pipe) with
speed and efficiency.
• Extra heavy cast-iron base, trunnion, and overarm
• Sealed ball bearings, 1/1 wheel arbor
• Positive, quick-lock swivel vise, opens 4/1
• Dual V-belt drive, 5 HP
• Heavy steel stand, optional
• Model KAK12B is a bench mount unit with swivel vise, less switch
• Model KAK12SS is a floor model with heavy duty steel stand, swivel
vise and manual switch
MADE IN USA!
Part No.
Blade
Dia.
(in.)
Motor
H.P.
Voltage
&
Phase
Blade
Speed
(RPM)
Weight
(Ibs.)
KAK12B
KAK12SS
12
12
5
5
220/440-3
220/440-3
3450
3450
165
195
• Rugged, cast iron trunnion and overarm - super rigid, super accurate
• Fast, foot-operated chain vise
'1/1 wheel arbor, sealed ball bearings
• Heavy-duty guards, efficient spark chute
Specifications
Capacity - solid bar
- pipe, other shapes
Table
Wheel arbor, diameter
Vise, foot-operated
3/1
4"
16" wide x 28/1 deep
1/1
chain
Part No.
Blade
Dia.
(in.)
Motor
H.P.
Voltage
&
Phase
Blade
Speed
(RPM)
Ship
Weight
(Ibs.)
KAK1618
16-18
10
220/440-3
1725
625
20" ABRASIVE CUT OFF SAWS
14" ABRASIVE CUT OFF SAWS
Made in USA!
These heavy-duty saws handle 2W' solid round stock (3/1 pipe) with
speed and efficiency.
• Extra heavy cast-iron base, trunnion, and overarm
• Sealed ball bearings, 1" wheel arbor
• Positive, quick-lock swivel vise, opens 4/1
• Dual V-belt drive, 5 HP
• Heavy steel stand, optional
• Model KAK14B is a bench mount unit with swivel vise, less switch
• Model KAK14SS is a floor model with heavy duty steel stand, swivel
vise and manual switch
This 15 HP abrasive saw has the built-in balance and rigidity - the power
and operating ease - to produce more work, at lower cost.
• Rugged, cast iron trunnion and overarm - super rigid, super accurate
• Fast, foot-operated chain vise
• 1" wheel arbor, sealed ball bearings
• Heavy-duty guards, efficient spark chute
• Powerful 15 HP drive, multiple v-belts
Specifications
Capacity - solid bar
4/1
- shapes
6/1
Table
18/1 wide x 30" deep
Wheel arbor, diameter
1/1
Vise, foot-operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. chain
MADE IN USA!
Part No.
KAK14B
KAK14SS
60
Blade
Dia.
(in.)
14
14
Motor
H.P.
5
5
Voltage
&
Phase
220/440-3
220/440-3
Blade
Speed
(RPM)
3450
3450
Weight
(Ibs.)
165
200
Part No.
KAK20SSF
,
Blade
Dia.
(in.)
Motor
H.P.
Voltage
&
Phase
Blade
Speed
(RPM)
Weight
(Ibs.)
20
15
220/440-3
1725
675
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718..387-1874
JANCY PIPE AND TUBE NUTCHER
Part
No.
Belt Size
(in.)
HP
JAN90000
4x77%
4.0
Jancy's all new Economy model pipe and tube
notcher features a large easy to operate slide
bar handle to control the in feed during the
notching process. Produce gap free fits in
seconds on pipe or tube from %" to 3" outside
diameter, regardless of wall thickness.
Graduated vise pivots 0 to 60 0 and secures
quickly on desired angle. Adjustable cross feed
table positions vise for optimum belt life locking
into place during the in feed grinding process.
Increase your notching productivity, reduce
welding cost and eliminate expensive
machining processes. Jancy's provided
premium abrasive grinding belts dramatically
improve work quality and appearance on a
wide range of materials including steel,
aluminum, stainless, titanium and most alloys.
Motor
Voltage
Roller 00 Part No.
.787
.866
.944
1.023
1.102
1.181
1.259
1.338
1.417
1.496
1.574
1.653
N42220
N42222
N42224
N42226
N42228
N42230
N42232
N42234
N42236
N42238
N42240
N42242
Roller 00
Part No.
1.732
1.811
1.898
1.968
2.047
2.126
2.204
2.283
2.362
2.519
2.755
2.992
N42244
N42246
N42248
N42250
N42252
N42254
N42256
N42258
N42260
N42264
N42270
N42276
For best fit when notching. select the grinder roller closest to
the mating part diameter.
Motor
Belt
Grinding
Capacity (in.)
Dimensions
(in.)
Weight
(Ibs.)
3420RPM
98.4FPS
%-3
59 x 47 x 19V2
430
Speed
220V-3Ph
Stock Grinding Rollers
JANCY-ERCULINA SUPER BENDER
Bending capacities of select materials
• Produces repeatable bends from 0 to 1800
• Centerline bend radius as small as two times
diameter of workpiece depending on
material and wall thickness
• Operates on 120V single phase
• Easy setup with quick former mounting
• Foot pedal switch controls bending
operation
• Easy to read LED displays bend angle
• Adjustable spring back setting selector
• Electronic braking system
• Swing away vise
• Overload protection circuity
• Constant bending speed ensures uniform
bends
• Adjustable motor deceleration selector
• Lightweight portable design for job site
bending
• Hidden base wheels and lift handle
Material
Pipe
Standard steel tube
Soft brass
Stainless steel
Welded tube for
furniture
Hydraulic tube
ST35
Hydraulic stainless
tube
Hard copper &
Aluminum
Round solids
Rectangular solids
Rectangular tubing
Square tubing
Solid Tube
Mild steel T
Mild steel C channel
Part
No.
Height
(in.)
Length
(in.)
Width
(in.)
JAN95100
36
24
10
Motor
120V
1500 Watts
Max.
Capacity
Max. wall
thickness
1.5001D
1.875
1.875x.125
1.875 x .109
2.125
SCH 40
.140
.125
.109
.128
2.000
2.500
.156
.125
2.500
.156
1.250
.312 x 1.875
.812 x 1.562
1.562 x 1.562
1.187 x 1.187
1.562 x 1.562
1.250 x .625
NA
NA
.125
.125
NA
.187
.187
Max. Norm
Capacity (in.)
Min. Center
Line Radius (in.)
1.625 x .140
Two Times
Diameter of Work
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631.. 242.. 8555 • FAX: 631-667-8869
Bending
Range
NetWt.
(Ibs.)
189
61
PORTABLE HAND NIB
PORTABLE PIPE NOTCHERS
For Vise or Bench Mounting
Highly efficient, hand operated
units for notching gas pipes,
steam pipes, and other round
and square steel sections
made of steel, stainless steel
and non ferrous materials,
Unique design ensures accurate, quick cutting of slots required for welding at 90° angles. May also be used for
making double corner joints
and for cutting venting slots in
round and square sections
from 11116" diameter up and with
a wall thickness of 3116" max.
A combination shear, nibbler and rod cutter for vise or bench mounting. Shears or
nibbles up to 3/16" mild steel and cuts mild
steel rod up to 3/a". Nibbles irregular
shapes inside or outside. Inside nibbling
depth of cut is 4" from any outside edge.
Double crank construction for easy operation. Tool steel blades and rod cutting
dies are interchangeable and may be
sharpened.
Part No.
Shearing/Nibbling
Capacity
(Mild Steel)
HET04000
Rod Cutting
Capacity
(Mild Steel)
Shipping Wt.
(Ibs.)
3/a"
29
DEEP THROAT BENCH PUNCH
Punches up to V2" Holes in up to Va" Mild Steel
Full eight-inch throat depth allows maximum utility for punching wide
stock ... punches to the center of a 16
inch circle. Double crank handle drive
provides easy operation. Body is ductile
iron and wearing parts are hardened
and ground. Includes 114" round punch
and die set unless otherwise specified.
STANDARD ROUND
PUNCH AND DIE SIZES AVAILABLE:
1116",3/32",5/64",7/64", Va", 9/64", 5/32", 1V64", 3116",
13/6 4", 7/3 2", 15/64", V4", 17/6 4", 9/32", 19/6 4", 511 6" ,
2V64", 1V32", 2¥64", 3/a", 25/6 4", 13/32", 27/64", 7116",
29/64 ", 15/3 2", Vl'.
STANDARD SQUARE PUNCH AND
DIE SETS AVAILABLE:
Va", 3116", %",5116", 3/a", 7/16", V2".
Part No.
HET06000
Capacities (in.)
Hole Size
Thickness
Ya"
Vl'
Wt.
(Ibs.)
Part No.
JAN91 001
JAN91 002
JAN91 003*
Cuts Pipe 0.0. (in.)
Min.
Max.
11;16
F/a
11;16
Nom Pipe
Size (in.)
Weight
(Ibs.)
%,1,1%
16
33
13
1%
23/a
2%
1Y2,2
1%,1 1/2
*For sink outflow
ELECTRIC DRIVE PIPE NOTCHERS
44
VISE MOUNTED PORTABLE SHEAR
This all steel, portable, vise mounted
shear handles up to Va" mild steel or 0/16"
round rod. Mounts easily on any vise for
true portability. Compound leverage provides easy cutting action. Weighs only
181bs.
Part No.
HET01000
62
Shearing
Capacity
(Mild Steel)
Rod Cutting
Capacity
(Mild Steel)
Shipping Wt.
(Ibs.)
1/8"
5/16"
18
A pertect unit for situations where many notches are required. Notches
gas pipe, steam pipe and other round and square steel sections of steel,
stainless, and non ferrous up to 3116" wall thickness with ease. Creates
pertect slots for welding at 90° angles, every time. Electric unit features a
heavy duty 2.2 kw electric motor with on/off switch and low voltage
protection.
Part No.
Cuts Pipe 0.0. (in.)
Min.
Max.
JAN92001
JAN92002*
11;16
11;16
2%
23/a
*Notching combination with sink outflow.
880 MEEKER AVE • BROOKLYN,
NY 11222
,
Tel: 718..387-0300 • FAX: 718..387..1874
Weight
(Ibs.)
145
160