CATALOG, Infield Groomers, Heying 2-5-13.pub

Transcription

CATALOG, Infield Groomers, Heying 2-5-13.pub
Version 2-6-13
Find the Machine You’re Looking For:
Pg. 2 Compare Listing - All Equipment Models
Pg. 3 Model Numbers & Function - All Equipment
Pg. 4 Infield Groomer Listing - Features & Uses
Pgs. 5-9
Pgs. 10-14
Pgs. 15-20
Pgs. 21-22
Pgs. 23-24
Pgs. 25-27
PR72 Pro Infield Groomer
AS72 All Star Infield Groomer
MG72-IN (Infield) Multi Groomer
MG72-HY (Hybrid) Multi Groomer
MG72-GT (Golf-turf) Groomer for Infields
MG72-BR (Brush) Groomers for Infields
Models Available:
1
2
Great for
Golf Greens!
3
4
MG72-E-GT-tt-st-hw (Standard Duty Cylinder & Rocker Switch Control)
MG72-E-GT-tt-st-wr (Standard Duty Cylinder & Wireless Remote Control)
MG72-E-GT-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
MG72-E-GT-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
Models Available:
5
6
7
8
MG72-E-BR(2)-tt-st-hw (Standard Duty Cylinder & Rocker Switch Control)
MG72-E-BR(2)-tt-st-wr (Standard Duty Cylinder & Wireless Remote Control)
MG72-E-BR(2)-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
MG72-E-BR(2)-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
Our Exclusive “Low
Battery Monitor”.
Models Available:
9
10
Single Broom Carriage can be
mounted at front or rear of frame.
11
12
MG72-E-BR(1)-tt-st-hw (Standard Duty Cylinder & Rocker Switch Control)
MG72-E-BR(1)-tt-st-wr (Standard Duty Cylinder & Wireless Remote Control)
MG72-E-BR(1)-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
MG72-E-BR(1)-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
Trickle Battery
Charger
The MG72 Hybrid is the only machine on the market with
implements that convert from Turf use to Infield use!
Models Available:
13
14
15
16
MG72-E-HY-tt-st-hw (Standard Duty Cylinder & Rocker Switch Control)
MG72-E-HY-tt-st-wr (Standard Duty Cylinder & Wireless Remote Control)
MG72-E-HY-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
MG72-E-HY-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
Models Available:
17
18
19
20
MG72-E-IN-tt-st-hw (Standard Duty Cylinder & Rocker Switch Control)
MG72-E-IN-tt-st-wr (Standard Duty Cylinder & Wireless Remote Control)
MG72-E-IN-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
MG72-E-IN-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
“wr”
Wireless Remote
Control
“hw”
Models Available:
21
22
23
24
25
PR72-E-IN-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
PR72-E-IN-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
PR72-E-IN-tt-hd-cr (Heavy Duty Cylinder & Corded Remote Control)
PR72-E-IN-tt-hd-du (Heavy Duty Cylinder & Dual Remote Control)
PR72-M-IN-tt-xx-mn (Manual Lift Pro Groomer)
Models Available:
26
27
28
AS72-E-IN-tt-hd-hw (Heavy Duty Cylinder & Rocker Switch Control)
AS72-E-IN-tt-hd-wr (Heavy Duty Cylinder & Wireless Remote Control)
AS72-M-IN-tt-xx-mn (Manual Lift All Star Groomer)
Dash Mount
Switch Control
“cr”
Corded
Remote Control
The AS72 was formerly known as our AS58
“mn”
Manual
Lift
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Made in USA
Copyright Heying Enterprises. Patent Pending
Pg.
2
Function
Model Numbers & Function
Comparison (All Equipment) by Heying Company
Golf-Turf
Complete Model No.
Brooms
MG72-E-GTMG72-E-GTMG72-E-GTMG72-E-GT-
tt-st-hw
Machine
MG72
Manual
Lift
E
M
GT
BR
IN
HY
tt = tongue
towed
st = standard
hd = heavy duty
tt
st
st
tt-st-wr
E
GT
tt
st
tt-hd-hw
E
GT
tt
hd
tt-hd-wr
E
GT
tt
hd
MG72-E-BR(2)
MG72-E-BR(2)
MG72-E-BR(2)
MG72-E-BR(2)
tt-st-hw
E
BR2
tt
st
tt-st-wr
E
BR2
tt
st
tt-hd-hw
E
BR2
tt
hd
tt-hd-wr
E
BR2
tt
hd
MG72-E-BR(1)
MG72-E-BR(1)
MG72-E-BR(1)
MG72-E-BR(1)
tt-st-hw
E
BR1
tt
st
tt-st-wr
E
BR1
tt
st
tt-hd-hw
E
BR1
tt
hd
tt-hd-wr
E
BR1
tt
hd
MG72-E-HYMG72-E-HYMG72-E-HYMG72-E-HYMG72-E-INMG72-E-INMG72-E-INMG72-E-INPR72-E-INPR72-E-INPR72-E-INPR72-E-IN-
tt-st-hw
E
HY
tt
st
tt-st-wr
E
HY
tt
st
tt-hd-hw
E
HY
tt
hd
tt-hd-wr
E
HY
tt
hd
tt-st-hw
E
IN
tt
st
tt-st-wr
E
IN
tt
st
tt-hd-hw
E
IN
tt
hd
tt-hd-wr
E
IN
tt
hd
E
IN
tt
hd
tt-hd-wr
E
IN
tt
hd
tt-hd-cr
E
IN
tt
hd
tt-hd-du
E
IN
tt
hd
25
PR72-M-IN-
tt-xx-mn
IN
tt
26
AS72-E-INAS72-E-INAS72-M-IN-
tt-hd-hw
E
IN
tt
hd
E
IN
tt
hd
IN
tt
4
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
27
28
tt-hd-hw
tt-hd-wr
tt-xx-mn
PR72
M
AS72
M
n/a
n/a
hw =
Controls for On Board 12v
Manual
Elec Lift
Hard
wired to
towing
machine
wr = Wireless Remote
cr = Corded Remote
du = Dual Remote Control
lift
mn
hw
Elec Lift System
wr
cr
du
hw
tt
3
Operator Lift Control System
mn =
hd
GT
2
6
Hybrid
Suffix
or
GT = Golf-Turf
BR = Broom Only
IN = Infield Groomer
HY = Hybrid (Golf-Turf & Infield)
Electric
Cylinder Style
E
1
5
Infields
Model No.
Base
Electric
How it
Attaches
to Towing
Machine
wr
hw
wr
hw
wr
hw
wr
hw
wr
hw
wr
hw
wr
hw
wr
hw
wr
n/a
n/a
hw
wr
hw
wr
cr
du
mn
hw
wr
mn
Function Info:
GT = Golf & Turf Machine. (GT machine is also very effective for grooming Artificial Turf, and, as an Infield Brush Groomer).
BR = Double Broom(2) or Single Broom(1) Machines available. (No Spring Tines or No Rubber Mat). Could also consider a GT model & add an optional 2nd Broom Carriage.
IN = Infield Grooming Machine. MG72 Infield has Tines, Metal Grading/Smoothing Bar and 2-Brush Rear Broom.
HY = Hybrid Machine. MG72 Hybrid includes Golf/Turf (GT) standard attachments & Infield (IN) standard attachments. Most complete multi-purpose machine on the market.
Electric Cylinder Styles: (Standard Duty or Heavy Duty Cylinders)
MG72-st Standard Duty “st” electric cylinder.
MG72-hd Heavy Duty “hd” electric cylinder.
PR & AS-hd Heavy Duty “hd” electric cylinder.
Operator Electric Lift Control Systems:
hw = 12 Volt Only (If used on a machine other than 12v then customer responsible for voltage conversion to 12 volt). What we refer to as a “Hard-Wired” Lift System.
Instead of the on-board 12v elec system this pkg includes wiring to utilize the user's tow machine 12v battery to power the electric lift. It’s intended for tow machines that have
a dash mountable switch panel (UTV’s, Gators, etc.) where the customer installs a rocker switch in the dash, or panel punch out. The wiring includes quick connect fittings for
the rear of the tow machine and at the end of the groomer tongue. Wiring assembly required to user towing machine. Wiring should be installed by a qualified professional.
wr = “Wireless Remote” this is a complete on-board electric lift system that includes a wireless remote control.
cr = “Corded Remote” (PR72 only) a complete on-board electric lift system that includes a 10 ft. long corded remote control.
du = “Dual Remote Control” (PR72 only) a complete on-board electric lift system that includes both the wireless remote control and the corded remote control systems.
Heying Company
Alton, IA 51003 Ph. (712) 756-8847
www.HeyingCompany.com
www.Infield-Drag.com
Copyright Heying Enterprises.
Pg.
3
Infield Groomer Comparison by Heying Company
Features & Uses
Comparison
Model
A
Lift System
Manual
Lift
Electric
Lift
X
PR72-E (Electric Lift)
Pro Groomer
B
PR72-M (Manual Lift)
Pro Groomer
C
AS72-E (Electric Lift)
AS72-M (Manual Lift)
All Star Groomer
E
F
G
H
(1)
X
X
All Star Groomer
D
Method of Leveling
Metal
Metal
(2 Blade) (1 Blade)
X
(2)
X
(2)
(1)
X
MG72-IN (Electric Lift)
Infield Multi Groomer
X
(1)
MG72-HY (Electric Lift)
Hybrid (Infield & Turf)
X
(1)
MG72-GT (Electric Lift)
Golf-Turf Multi Groomer
X
(1)
MG72-BR (Electric Lift)
Double or Single Broom
X
(1)
X
(2)
X
(2)
X
(2)
X
(2)
How Break up Hard Infields
Hard Chisel
Teeth
Broom
X
(2)
X
(2)
Spring
Tines
Abrasion Resistant
X
(3)
X
(3)
X
(3)
X
(3)
X
(4)
X
(4)
X
(4)
(4)
Other Uses
Multi
Purpose
X
(5)
X
(5)
X
(5)
X
(5)
No Tools
Needed to
Adjust
Multi
Engineering
Purpose
X
(6)
X
(6)
X
(6)
X
(6)
X
(6)
X
(6)
X
(6)
X
(6)
User
Skill
Level
Max
Grooming
Speed
(7)
(8)
Average
5 (mph)
Skill Level
(Range 3-5)
Recommended
Average
5 (mph)
Skill Level
(Range 3-5)
Recommended
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
Low
8 (mph)
Skill Level
(Range 3-8)
Easy to use
(1) Multiple choices available for method of Electric Lift Control. See catalog for specifics relating to each machine.
PR72-E: Wireless Remote Control, or Corded Remote Control, or both can be installed - called Dual Remote Control. Also “hw” hard-wired, and Manual Lift.
MG72-E: Wireless Remote Control or Hard-wired to the Towing Machine. AS72-E: Wireless Remote Control, “hw” Hard-Wired Electric Lift, or Manual Lift.
(2) 2-Blade Leveling is superior to 1-Blade. However, our 1-Blade Leveling machines are as good as anything else on the market, except our 2-Blade PR72. The MG72-GT & BR
models do not have a metal grading bar, but the Broom Carriage does perform quite well on infields that are level and maintained properly. However, a broom should not
be expected to grade and level (cut high spots on infields, etc.) as well as metal. MG72-IN & HY models include a metal 1-Blade grading bar implement for infields.
(3) The PR72 and AS72 machines have abrasion resistant solid steel chisel teeth for breaking up hard infields.
(4) The MG72 has Spring Tines that perform quite well on many infield materials. But, spring tines will not perform as well as hard chisel teeth on infields that get extremely hard.
Spring Tines do provide the ability to perform multi-purpose functions such as loosening and grooming rock and many granular materials and are very effective for turf
uses such as de-thatching, pulverizing aeration cores, etc. The MG72-BR model is an all-broom machine and does not have the spring tines attachment.
(5) The MG72-HY (Hybrid) model includes infield grooming attachments and turf attachments - making it a complete multi-purpose machine. Nothing else like it on the market!
(6) No Tools Needed to Adjust is often overlooked by customers when they are choosing a grooming machine. But, once they have a groomer it is a great advantage both in time
saved and ease of use if it adjusts without needing tools. Our groomers are engineered and designed to adjust without tools to be truly “user-friendly” and adjust quickly.
(7) The AS72 & MG72 machines are very easy to use. The PR72 is slightly more difficult because it’s 2-lade leveling/grading implement is fully adjustable. This engineering allows it
to be adjusted to the everyday changing conditions of infields. These adjustments make it superior to any other machine on the market. However, this also adds to the
skill level necessary to operate and adjust the machine.
(8) Towing Speed while grooming. For a 2-Blade leveling/grading implement (PR72) to perform correctly it cannot be expected to travel at too high of speed. The AS72 and MG72
machines have a 1-Blade grading device so are able to travel at slightly higher speed when grooming.
Model
Weight (lbs.)
Standard Machine
Length (Front to Back)
Width
Recommended Width of Base Paths
Home Plate
Standard Machine
Widest Measurement Standard Machine
Ball Fields with Grass Infields
Diameter Around Home Plate
A
PR72-E (Electric Lift)
450 (9)
80” (10)
72” (Rear Broom)
(11)
78” (Standard Machine) 84” (78” Drag Mat option) (12)
30 Ft. recommended
(13)
B
PR72-M (Manual Lift)
400 (9)
80” (10)
72” (Rear Broom)
(11)
78” (Standard Machine) 84” (78” Drag Mat option) (12)
30 Ft. recommended
(13)
C
AS72-E (Electric Lift)
350 (9)
76” (10)
72” or 78” (Drag Mat)
(11)
78” (Standard Machine) 84” (78” Drag Mat option) (12)
30 Ft. recommended
(13)
D
AS72-M (Manual Lift)
400 (9)
76” (10)
72” or 78” (Drag Mat)
(11)
78” (Standard Machine) 84” (78” Drag Mat option) (12)
30 Ft. recommended
(13)
E
MG72-IN (Electric Lift)
275 (9)
64” (10)
Wheel Base 84” Infield Broom 90”
(11)
96” with Broom Extensions on Infield Machine
(12)
30 Ft. recommended
(13)
F
MG72-HY (Electric Lift)
300 (9)
64” / 82” (10)
Wheel Base 84” Infield Broom 90”
(11)
96” with Broom Extensions on Infield Machine
(12)
30 Ft. recommended
(13)
G
MG72-GT (Electric Lift)
300 (9)
82” (10)
Wheel Base 84”
(11)
96” (If Rear 2-Brush Broom or Wheel Tines are used) (12)
30 Ft. recommended
(13)
H
MG72-BR (Electric Lift)
300 (9)
50” (10)
Wheel Base 84”
(11)
96” (If Rear 2-Brush Broom or Wheel Tines are used) (12)
30 Ft. recommended
(13)
(9) Standard machine weight is listed. Will increase if options are added. (MG72-Hybrid weight listed refers to the GT version while the IN attachments are slightly less).
(10) Length listed is from tip of hitch to deepest part of standard rear attachment. Optional rear attachments (i.e. drag mat for PR72) will increase length.
Pg.
(11) Width listed is the widest measurement of a standard machine. PR72 has optional 78” Drag Mat which will increase widest measurement. AS72 also has 78” Drag Mat choice.
(12) Driving clearance on base paths of 3 inches on each side of the machine is a recommended minimum (or a total of 6 inches added to widest measurement of the machine).
(13) This is the circular area surrounding home plate on grass infields with granular base paths. To groom both sides of the plate it is more successful when sufficient turning room is available.
The turning radius of towing machines will vary. Each customer should test how large of a turning radius is needed in order to groom both sides of home plate.
Heying Company Alton, IA 51003 Ph. (712) 756-8847
Fax (712) 756-8849
www.HeyingCompany.com
www.Infield-Drag.com
Copyright Heying Enterprises.
4
Pg.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Made in USA
Copyright Heying Enterprises.
5
“hd” Cylinder Speed:
Full stroke in
8 seconds.
Heavy Duty
Connectors.
Note: HW system wiring should be performed by a
qualified professional. HW systems are intended to have
12 volt power supplied by the user’s tow machine.
For tow machines other than 12 volt user responsible
for providing a voltage converter.
“hd” Cylinder Speed:
Full stroke in
8 seconds.
“HW” Wiring package complete with “hd” Heavy Duty
12v Electric Cylinder, Dash Mountable Rocker Switch,
Wire, Fuse, Fuse Holder, Connectors, &
Protective Wire Sleeve.
Rocker Switch. 4 Contact.
Mom-ON-off-Mom-ON.
Fits dash cutout hole range of:
.820” to .830” wide X
.142” to .148” high.
Requires wiring assembly to user tow machine (12 volt).
12v battery shown for reference only and represents user’s tow machine battery.
“WR” Electric Lift System is completely “on-board” providing the flexibility of being
able to tow the MG72 with a variety of towing machines.
Complete with “hd” Heavy Duty 12v Electric Cylinder, Wireless
Remote Control, Metal Battery Tray, Plastic Case, Full size
12v Battery, Battery Charger, Low Battery Monitor and wiring.
No wiring required to user tow machine.
Wireless Remote Control - the ultimate in flexibility.
“hd” Cylinder Speed:
Full stroke in
8 seconds.
Our exclusive
Low Battery Monitor
included. Audible
beep sounds when the battery
voltage drops to unsafe level.
“CR” Corded Remote System is exactly like the Wireless Remote system above,
except this system utilizes a 10 ft. long Corded Remote.
The remote plugs into a receiver harness on the outside
of the battery case.
No wiring required to user tow machine.
10 ft. long Corded Remote Control.
“hd” Cylinder Speed:
Full stroke in
8 seconds.
Battery Charger
included. Plugs
into a standard 110v cord.
Battery Charger
included. Plugs
into a standard 110v cord.
Our exclusive
Low Battery Monitor
included. Audible
beep sounds when the battery
voltage drops to unsafe level.
“DU” System - you get both controls: Wireless & Corded. Most customers who order this
system put the corded remote in the storage shed as a backup and use the wireless remote.
No wiring
required to
user tow
machine.
Battery Charger
included. Plugs
into a standard 110v cord.
Our exclusive
Low Battery Monitor
included. Audible
beep sounds when the battery
voltage drops to unsafe level.
Posi-Lock Manual Lift Control System. Manual lift & lock holds implements in their engaged
position while grooming or breaking up infields. After a lock position is chosen with the lift arm fine
depth adjustments are made using the Turnbuckle. When traveling on and off the field this system
also locks the implements into a raised carrying position.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Pg.
6
PR72-E-IN-tt-hd-hw
Over 90% of Assembly
completed at the factory!
Compare to many other machines that require extensive
assembly in the field.
“HW” Hard Wired version uses your tow machine’s 12v battery to
power the electric lift. “HW” wiring package complete with dash-mount rocker
switch, wiring, connectors, fittings & protective sleeve to be
installed on user’s 12v tow machine. Wiring installation
required on user tow machine.
For machines other than 12v user must supply voltage converter.
Tongue, Hitch and Chained Hitch
Pin. Hitch quickly adjusts to different
tow machine drawbars heights without
tools. Tongue easily removes for
storage, if desired.
Optional Tongue
Stand is also
shown.
Upper Chisel Mounts
Shown
(Alternate storage
position for Chisel).
Premium Powder
Coated Finish
on all steel
parts.
Height & Leveling
System for quick,
easy side to side front blade
adjustment to ensure that it
cuts evenly side to side &
adjusts to changing
infield conditions.
Rock
Basket
sifts rocks
& debris.
Heavy Duty
Welded Frame.
No-Air,
No-Flat
Wheels.
Exclusive 2-Blade “Leveler”.
Two blades (front & rear) level and
grade by cutting off high areas, mixing
material as it travels, and releasing it into low
areas where it’s needed. Plus, the front blade
cuts 100% of it’s width - no open gaps where
material is un-cut - for ultimate leveling.
Completely adjustable in all directions. Controls
weeds. Deters water puddling & compaction.
Chisel Implement
Breaks up Hard Infields.
Abrasion resistant steel
teeth. Completely adjustable
depth control.
Rear Smoothing Broom.
Brushes mount in our
exclusive aluminum channels.
Synthetic, long lasting,
mildew resistant bristles.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Pg.
7
PR72-E-IN-tt-hd- (wr, cr or du)
“On-Board Electric Lift Systems” (wr, cr, or du). Machine shown represents 3 different choices
of “on-board” electric lift systems: Wireless Remote (wr), Corded Remote (cr) or Wireless & Corded “Dual” (du)
Remote Control. All of these “on-board” electric lift systems allow you to pull the PR72 with a variety of different towing machines.
Rock
Basket
sifts rocks
& debris.
Height & Leveling
System for quick, easy
side to side front blade
adjustment to ensure
that it cuts evenly side
to side & adjusts to
changing infield
conditions..
No-Air,
No-Flat
Wheels.
Exclusive 2-Blade “Leveler”.
Two blades (front & rear) level and
grade by cutting off high areas, mixing
material as it travels, and releasing it into low areas
where it’s needed. Plus, the front blade cuts 100% of
it’s width (no open gaps where material is un-cut).
Completely adjustable in all directions. Controls
weeds. Deters water puddling & compaction.
Chisel Implement
Breaks up Hard Infields.
Abrasion resistant steel
teeth. Completely adjustable
depth control.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require extensive assembly in the field.
Rear Smoothing Broom.
Brushes mount in our
exclusive aluminum channels.
Synthetic, long lasting,
mildew resistant bristles.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Machine Photo shown represents
these 3 Operator Lift Control Systems.
No wiring required to your towing machine(s). All “on-board” systems are complete with Heavy Duty (hd) Electric Cylinder, Full Size 12 Volt
Battery, Metal Battery Tray, Plastic Battery Compartment, Battery Charger,
Low Battery Monitor, Manual Override Tools, and the control system
Tongue, Hitch
you choose (wr, cr or du).
and Chained
Hitch Pin adjust
to different tow
Upper Chisel Mounts
Heavy Duty
(Alternate storage
machine drawbars.
position for Chisel).
Welded Frame.
Easy to remove
during storage.
Premium Powder Coated
Finish on all steel parts.
Pg.
8
PR72-E-IN-tt-xx-mn
Over 90% of Assembly
completed at the factory!
Compare to many other machines that
require extensive assembly in the field.
“MN” Manual Lift PR72.
Posi-Lock Lift Arm. Manual lift and lock system holds the implements
Premium Powder Coated Finish
on all steel parts.
(leveler-chisel-broom-optional drag mat) in their engaged position while
grooming or breaking up Infields and locks them into a raised position when
traveling off the field. After a lock position is chosen with the lift arm fine
adjustments are made to the leveler’s rear cutting blade or the depth of the
chisel using the Turnbuckle.
Tongue, Hitch and Chained
Hitch Pin. Hitch quickly
adjusts up or down without
needing tools to different tow
machine drawbars. Tongue is
easy to remove for storage.
Upper Chisel Mounts
(Alternate storage
position for Chisel).
Heavy Duty Steel
Welded Frame.
Turnbuckle makes fine
adjustments, up or
down, to the rear of the
leveler and the chisel.
Height & Leveling
System for quick,
easy side to side front blade
adjustment to ensure that it
cuts evenly side to side &
adjusts to changing
infield conditions.
Rock
Basket
sifts rocks
& debris.
No-Air,
No-Flat
Wheels.
Exclusive 2-Blade “Leveler”.
Two blades (front & rear) level and
grade by cutting off high areas, mixing
material as it travels, and releasing it into low
areas where it’s needed. Plus, the front blade
cuts 100% of it’s width - no open gaps where
material is un-cut - for ultimate leveling.
Completely adjustable in all directions. Controls
weeds. Deters water puddling & compaction.
There is no other leveler like this on the market.
Chisel Implement
Breaks up Hard Infields.
Abrasion resistant steel
teeth. Completely adjustable
depth control. When not in
use the chisel can mount
here in “non-engaged”
position or above the frame.
Rear Smoothing
Broom. Brushes
mount in our exclusive
aluminum channels.
Synthetic, long lasting,
mildew resistant
bristles.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Shown
Pg.
9
New for 2013 - Model Numbers changed to AS72.
The AS72 All Star Groomer was formerly our AS58. This machine was originally designed as only a
Chisel Machine, and the chisel implement was 58 inches wide, thus the number “58”. It did not originally
have any other ball field grooming implements (Grading Bar, Broom, etc.). Over the years however we have
added implements for grooming which are now standard equipment. The grooming implements are 72 inches
wide so the number “58” has not made sense in the model numbers for quite some time.
It will now be Model AS72.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright, Heying Enterprises.
Pg.
Made in USA
10
“hd” Cylinder Speed:
Full stroke in
8 seconds.
Heavy Duty
Connectors.
Note: HW system wiring should be
performed by a qualified professional.
HW systems are intended to have
12 volt power supplied by the user’s
tow machine.
For tow machines other than 12 volt
user responsible for providing a
voltage converter.
“hd” Cylinder Speed:
Full stroke in
8 seconds.
“HW” Wiring package complete with “hd” Heavy Duty
12v Electric Cylinder, Dash Mountable Rocker Switch,
Wire, Fuse, Fuse Holder, Connectors, &
Protective Wire Sleeve.
Rocker Switch. 4 Contact.
Mom-ON-off-Mom-ON.
Fits dash cutout hole range of:
.820” to .830” wide X
.142” to .148” high.
Requires wiring assembly to user tow machine (12 volt).
12v battery shown for reference only and represents user’s tow machine battery.
“WR” Electric Lift System is completely “on-board” providing the flexibility
of being able to tow the MG72 with a variety of towing machines.
Complete with “hd” Heavy Duty 12v Electric Cylinder,
Wireless Remote Control, Metal Battery Tray, Plastic
Case, Full size 12v Battery, Battery Charger, Low
Battery Monitor and wiring.
No wiring required to user tow machine.
Battery Charger included.
Plugs into a standard 110v cord.
Our exclusive
Low Battery Monitor
Is included. Audible beep
sounds when the battery
voltage drops to unsafe level.
Wireless Remote Control - the ultimate in flexibility.
The “original” Manual Lift version
utilizes our exclusive “Posi-Lock” Lift
and Hold Manual Lift.
Posi-Lock Manual Lift Control System. Manual lift & lock
holds implements in their engaged position while grooming or
breaking up infields. After a lock position is chosen with the lift arm
fine depth adjustments are made using the Turnbuckle.
When traveling on and off the field this system also
locks the implements into a raised carrying position.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright, Heying Enterprises.
Made in USA
Pg.
11
AS72-E-IN-tt-hd-hw
Premium Powder Coated
Finish on all steel parts.
Grooming Setup.
The Grading-Leveling Bar attached
directly to the frame for grooming
infields (shown in main photo).
The Smoothing Broom and Drag
Mat follow behind. No Tools
Needed to switch implements from
the “Grooming” setup to breaking
up hard infields with the “Chisel”
attachment.
“HW” Hard Wired version uses your tow machine’s 12v battery to
power the electric lift. “HW” wiring package complete with dash-mount rocker
switch, wiring, connectors, fittings & protective sleeve to be installed on user’s 12v tow
machine. Wiring installation required on user tow machine.
For machines other than 12v user must supply voltage converter.
Steel Mesh Drag Mat is standard on all AS machines. Helps smoothen surface. Easy to
remove when not needed. Customer chooses width of mat when ordering.
Drag Mat Brackets. Drag Mat is
rolled up and then carried
by the brackets.
Heavy Duty
12v Electric
Cylinder.
Heavy Duty
Steel Welded
Frame.
Tongue, Hitch and
Chained Hitch Pin.
Hitch quickly adjusts up or
down without needing tools
to different tow machine
drawbars. Tongue is also
easy to remove for
storage.
Weight Trays. Heavy Duty
1/4” Steel. Hold four large
cement blocks or other
material for adding weight
when needed.
No-Air, No-Flat Wheels
Grading-Leveling Bar. Does the heavy work when
grooming infields. Cuts off high areas, mixes as it travels,
and releases material into low areas where it’s needed.
Deters water puddling and helps control weeds.
Chisel Attachment.
No Tools Needed to switch implements from
“Grooming” to “Chiseling”. The chisel is standard
on all AS machines, and is used to break up hard
infields. Abrasion resistant steel teeth. Chisel can
be followed by the Broom and Drag Mat if
desired. Pull 3 easy to remove quick
pins and all implements drop away
from the frame when changing setup.
Rear 2-Brush Smoothing Broom. Provides a smooth,
well-manicured finish. Brushes mount in our exclusive
aluminum channels. Synthetic, long lasting, mildew resistant.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Pg.
12
AS72-E-IN-tt-hd-wr
Premium Powder Coated
Finish on all steel parts.
Grooming Setup.
The Grading-Leveling Bar attached
directly to the frame for grooming
infields (shown in main photo).
The Smoothing Broom and Drag
Mat follow behind. No Tools
Needed to switch implements from
the “Grooming” setup to breaking
up hard infields with the “Chisel”
attachment.
“On-Board Electric Lift System” with Wireless Remote Control.
The On-Board Electric System allows the user to pull the AS72 with any towing machine.
No wiring required to user tow machine(s). System complete with Heavy Duty (hd) Electric
Cylinder, Full Size 12 Volt Battery, Metal Battery Tray, Plastic Battery Case, Battery Charger,
Low Battery Monitor, Manual Override Tools, and our exclusive Wireless Remote Control.
Heavy Duty 12v
Electric Cylinder
Steel Mesh Drag Mat is standard on all AS machines. Helps
smoothen the surface. Easy to remove when not needed.
Customer chooses width of mat when ordering.
Drag Mat Brackets. Drag Mat
is rolled up and then carried
by the brackets.
Heavy Duty
Steel Welded
Frame.
Tongue, Hitch and
Chained Hitch Pin.
Hitch quickly adjusts up or
down without needing tools
to different tow machine
drawbars. Tongue is also
easy to remove for
storage.
Weight Trays. Heavy Duty
1/4” Steel. Hold four large
cement blocks or other
material for adding weight
when needed.
No-Air,
No-Flat Wheels
Grading-Leveling Bar. Does the heavy work when
grooming infields. Cuts off high areas, mixes as it travels,
and releases material into low areas where it’s needed.
Deters water puddling and helps control weeds.
Chisel Setup.
No Tools Needed to switch implements from
“Grooming” to “Chiseling”. The chisel is standard on
all AS machines, and is used to break up hard infields.
Abrasion resistant steel teeth. Chisel can be followed
by the Broom and Drag Mat if desired.
Pull 3 easy to remove quick pins and
all implements drop away from the
frame when changing setup.
Rear 2-Brush Smoothing Broom. Provides a smooth,
well-manicured finish. Brushes mount in our exclusive
aluminum channels. Synthetic, long lasting, mildew resistant.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Pg.
13
AS72-M-IN-tt-xx-mn
Grooming Setup.
The Grading-Leveling Bar attached
directly to the frame for grooming infields
(shown in main photo). The Smoothing Broom
and Drag Mat follow behind. No Tools Needed
to switch implements from the “Grooming” setup
to breaking up hard infields with the “Chisel”
attachment.
Posi-Lock Manual Lift Control System. Manual lift & lock holds Implements
in their engaged position while grooming or breaking up infields & locks them
into a raised position when traveling off the field. After a lock position is chosen
with the lift arm fine depth adjustments are made using the Turnbuckle.
Steel Mesh Drag Mat is standard on all AS machines. Helps
smoothen the surface. Easy to remove when not needed.
Customer chooses width of mat when ordering.
Turnbuckle
Drag Mat Brackets.
Drag Mat is rolled up and
then carried by the
brackets.
Heavy Duty Steel
Welded Frame.
Tongue, Hitch and
Chained Hitch Pin.
Hitch quickly adjusts up or
down without needing tools
to different tow machine
drawbars. Tongue is also
easy to remove for
storage.
Weight Trays
are heavy duty 1/4” steel and
hold four large cement blocks,
or other materials, for adding
weight when desired.
Premium Powder Coated Finish
on all steel parts.
No-Air, No-Flat Wheels
Grading-Leveling Bar. Does the heavy work when
grooming infields. Cuts off high areas, mixes as it travels,
and releases material into low areas where it’s needed.
Deters water puddling and helps control weeds.
Chisel Implement.
No Tools Needed to switch implements from
“Grooming” to “Chiseling”. The chisel is standard
on all AS machines, and is used to break up hard
infields. Abrasion resistant steel teeth. Chisel can
be followed by the Broom and Drag Mat if
desired. Pull 3 easy to remove quick
pins and all implements drop away
from the frame when changing setup.
Rear 2-Brush Smoothing Broom. Provides a smooth,
well-manicured finish. Brushes mount in our exclusive
aluminum channels. Synthetic, long lasting, mildew resistant.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises.
Made in USA
Pg.
14
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Made in USA
Copyright Heying Enterprises.
Pg.
15
“st” Cylinder Speed:
Full stroke obtained in
16 seconds.
Heavy Duty Top
Quality Connectors.
“HW” Wiring package complete with
“st” Standard Duty 12v Electric Cylinder,
Dash Mountable Rocker Switch, Wire,
Fuse, Fuse Holder, Connectors, & Protective Wire Sleeve.
Note: HW system wiring should be
performed by a qualified professional.
HW systems are intended to have
12 volt power supplied by the user’s
tow machine. For tow machines other
than 12 volt user responsible for
providing a voltage converter.
Rocker Switch. 4 Contact.
Mom-ON-off-Mom-ON.
Fits dash cutout hole
size range of:
.820” to .830” wide X
.142” to .148” high.
Requires wiring assembly to user tow machine (12 volt).
12v battery shown for reference only and represents user’s tow machine battery.
“st” Cylinder Speed:
Full stroke obtained in
16 seconds.
“WR” Electric Lift System is completely “on-board”
providing the flexibility of being able to tow the
MG72 with a variety of towing machines.
No wiring required to user tow machine.
Complete with “st” Standard Duty
12v Electric Cylinder, Wireless Remote
Control, Metal Battery Tray, Plastic Case,
12v Sealed Battery, Battery Charger, Low
Battery Monitor and all necessary wiring.
1.1 amp Trickle Battery
Charger Is included.
Safe technology allows
the charger to be plugged in at
all times when the machine is
not in use so the MG72 is always
ready to use when needed.
Plugs into a standard 110v cord.
Our exclusive
Low Battery Monitor
included. Audible
beep sounds when
battery voltage drops
to unsafe level.
Wireless Remote Control - the ultimate in flexibility.
“hd” Cylinder Speed:
Full stroke obtained in
8 seconds. 2x faster.
Note: HW system wiring should
be performed by a qualified
professional. HW systems are intended to
have 12 volt power supplied by the user’s
tow machine. For tow machines other than
12 volt user responsible for providing a
voltage converter.
“hd” Cylinder Speed:
Full stroke obtained in
8 seconds. 2x faster.
Heavy Duty Top
Quality Connectors.
“HW” Wiring package complete with “hd” Heavy Duty 12v Electric
Cylinder, Dash Mountable Rocker Switch, Wire, Fuse, Fuse
Holder, Connectors, & Protective Wire Sleeve.
Requires wiring assembly to user tow machine (12 volt).
Rocker Switch. 4 Contact.
Mom-ON-off-Mom-ON.
Fits dash cutout hole
Advantages of “hd” Cylinder:
size range of:
1) Faster Cylinder Speed (2x faster).
12v battery shown
.820” to .830” wide X
2) Drag Mat option can be added
for reference only
.142” to .148” high.
(only recommended on machines with the hd cylinder).
and represents
Advantage of “hd” Battery: Longer battery life between charges.
user’s tow machine battery.
“WR” Electric Lift System completely “on-board”.
Provides the flexibility of being able to tow the MG72
with a variety of towing machines. No wiring
required to user tow machine. Complete with
“hd” Heavy Duty 12v Electric Cylinder,
Wireless Remote Control, Metal Battery
Tray, Plastic Case, Full Size 12v Battery, Low
Battery Monitor, Battery Charger, & Wiring.
Advantages of “hd” Cylinder:
1) Faster Cylinder Speed (2x faster).
2) Drag Mat option can be added
Wireless Remote Control
- the ultimate in flexibility.
(only recommended on machines with the hd cylinder).
1.1 amp Trickle Battery
Charger Is included.
Safe technology allows
the charger to be plugged
in at all times when the
machine is not in use so
the MG72 is always ready
to use when needed.
Plugs into a standard
110v cord.
Our exclusive
Low Battery Monitor
included. Audible
beep sounds when
battery voltage drops
to unsafe level.
Advantage of “hd” Battery: Longer battery life between charges.
Heying Company Alton, Iowa 51003
Copyright Heying Enterprises.
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA
Patent Pending
Pg.
16
MG72-E-IN-tt-st-hw
Patent Pending
Tongue, Hitch
and Chained
Hitch Pin.
Spring Tine
Adjustment System.
Each row
of tines adjusts
independently.
Heavy duty
steel welded
frame.
Premium
Powder Coated
Finish on all
steel parts.
st-HW Lift Control System.
12v Electric Cylinder (standard duty). “HW” wiring package complete with
dash-mount rocker switch, wiring, connectors, fittings & protective sleeve
to be installed on 12v tow machine.
Wiring installation required on user tow machine.
For machines other than 12v user must supply voltage converter.
Hitch Adaptor.
1-1/16”
Solid Axle.
Grading-Leveling Bar
does the heavy work when
grooming infields. Adjustable
angle. Cuts off high areas, mixes
material as it travels, and releases it
into low areas where it’s needed.
Deters water puddling & compaction and
control weeds.
No-Air,
No-Flat
Wheels
Spring Tines. 2 Rows of 44 total teeth.
Successful in breaking up many clay
based infields, and much more.
Each row is independently
adjustable to numerous positions.
Also used to de-thatch turf.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Rear Smoothing Broom produces a
well-manicured finish. Brushes mount in our
aluminum channels on a heavy duty frame.
Synthetic, long lasting, mildew resistant bristles.
Broom flips up, or easily removes, for storage.
Broom Extensions standard on all Infield versions of
the MG72. They extend the broom to cover wheel tracks.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Made in USA
Pg.
17
MG72-E-IN-tt-st-wr
Tongue, Hitch
and Chained
Hitch Pin.
Spring Tine
Adjustment System.
Each row
of tines adjusts
independently.
Heavy duty
steel welded
frame.
Premium
Powder Coated
Finish on all
steel parts.
st-WR Lift Control System.
12v Electric Cylinder (standard duty). “WR” On-Board system complete
with Wireless Remote Control, Cylinder, Battery Tray & Plastic Case,
12v Sealed Battery, Battery Charger, & Low Battery Monitor.
No wiring required to user tow machine. Versatility of this lift system allows
numerous machines to be used for towing.
Hitch Adaptor.
1-1/16”
Solid Axle.
No-Air,
No-Flat
Wheels
Spring Tines. 2 Rows of 44 total teeth.
Successful in breaking up many clay
based infields, and much more.
Each row is independently
adjustable to numerous positions.
Also used to de-thatch turf.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Grading-Leveling Bar
does the heavy work when
grooming infields. Adjustable
angle. Cuts off high areas, mixes
material as it travels, and releases it
into low areas where it’s needed. Deters
water puddling & compaction and control weeds.
Rear Smoothing Broom produces a well-manicured
finish. Brushes mount in our aluminum channels on a
heavy duty frame. Synthetic, long lasting, mildew resistant
bristles. Broom flips up, or easily removes, for storage.
Broom Extensions standard on all Infield versions of
the MG72. They extend the broom to cover wheel tracks.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Patent Pending
Made in USA
Pg.
18
MG72-E-IN-tt-hd-hw
Tongue, Hitch
and Chained
Hitch Pin.
Spring Tine
Adjustment System.
Each row
of tines adjusts
independently.
Heavy duty
steel welded
frame.
Premium
Powder Coated
Finish on all
steel parts.
hd-HW Lift Control System.
12v Electric Cylinder (heavy duty). “HW” wiring package complete with
dash-mount rocker switch, wiring, connectors, fittings & protective sleeve
to be installed on user’s 12v tow machine.
Wiring installation required on user
tow machine. For machines other
than 12v user must
supply voltage
converter.
Hitch Adaptor.
1-1/16”
Solid Axle.
Patent
Pending
No-Air,
No-Flat
Wheels.
Spring Tines. 2 Rows of 44 total teeth.
Successful in breaking up many clay
based infields, and much more.
Each row is independently
adjustable to numerous positions.
Also used to de-thatch turf.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require extensive
assembly in the field.
Grading-Leveling Bar
does the heavy work when
grooming infields. Adjustable
angle. Cuts off high areas, mixes
material as it travels, and releases it
into low areas where it’s needed.
Deters water puddling & compaction and
control weeds.
Rear Smoothing Broom produces a
well-manicured finish. Brushes mount in our
aluminum channels on a heavy duty frame.
Synthetic, long lasting, mildew resistant bristles.
Broom flips up, or easily removes, for storage.
Broom Extensions standard on all Infield versions of
the MG72. They extend the broom to cover wheel tracks.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Made in USA
Pg.
19
MG72-E-IN-tt-hd-wr
Tongue, Hitch
and Chained
Hitch Pin.
Spring Tine
Adjustment System.
Each row
of tines adjusts
independently.
Heavy duty
steel welded
frame.
Premium
Powder Coated
Finish on all
steel parts.
hd-WR Lift Control System.
12v Electric Cylinder (heavy duty). “WR” On-Board system complete
with Wireless Remote Control, HD Cylinder, Battery Tray & Plastic
Case, Full Size 12v Battery, Battery Charger, & Low Battery Monitor.
No wiring required to user tow machine. Versatility of this lift system allows
numerous machines to be used for towing.
Hitch Adaptor.
1-1/16”
Solid Axle.
Grading-Leveling Bar
does the heavy work when
grooming infields. Adjustable
angle. Cuts off high areas, mixes
material as it travels, and releases it
into low areas where it’s needed. Deters
water puddling & compaction and control weeds.
No-Air,
No-Flat
Wheels
Spring Tines. 2 Rows of 44 total
teeth. Successful in breaking up
many clay based infields, and
more. Each row is independently
adjustable to numerous positions.
Also used to de-thatch turf.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require
extensive assembly in the field.
Rear Smoothing Broom produces a well-manicured
finish. Brushes mount in our aluminum channels on a
heavy duty frame. Synthetic, long lasting, mildew resistant
bristles. Broom flips up, or easily removes, for storage.
Broom Extensions standard on all Infield versions of
the MG72. They extend the broom to cover wheel tracks.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Patent Pending
Made in USA
Pg.
20
Note: The MG72 Hybrid Groomer is available with
4 Choices of Operator Lift Control Systems
even though only one model (hd-wr) is shown (next page).
For more detailed info on each lift control system available
please refer to MG72 Golf-Turf Groomer pages.
Also see MG72-GT Section and MG72-BR Section
for Groomers that are quite successful when
used for Infield Grooming.
Pg.
21
MG72-E-HY-tt-hd-wr
Hybrid MG72 Multi Groomer.
For customers who have Turf Maintenance needs and Infield Maintenance needs we offer the only “hybrid”
groomer on the market. This one-of-a-kind machine includes the front Spring Tines, and all standard implements
from the MG-IN (Infield) model (Grading-Smoothing Bar and Rear Smoothing Broom with Extensions), plus all
standard implements of the GT (Golf-Turf) model (Turf Broom Carriage and Rear Rubber Mat).
Shown below with “hd-WR” Complete “On-Board” Lift Control System.
The Only “Hybrid” Turf and Infield Groomer
on the Market!
1-1/16”
Solid Shaft Axle
Rear
Rubber
Mat
Spring
Tines
No-Air,
No-Flat
Wheels.
Grading-Smoothing
Bar for Infields
Optional
Rear
Wheels
Tines
Rear
Smoothing
Broom with
Extensions
Optional Drag Mat and Brackets.
(only recommended
for “hd” models).
Turf Broom
Carriage
Over 90% of Assembly completed at the factory! Compare to many other machines that require extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Patent Pending
Made in USA
Pg.
22
Question: Why do we include the MG72-GT (Golf & Turf)
Groomers in the Infield Groomer Section?
Answer: Because our Turf Style GT Groomers are quite
successful when grooming infields. If you are looking for an
easy to use Broom Groomer for use on Infields then consider
the following machines by Heying Company:
MG72-GT Models
MG72-BR Models
And, don’t forget, if you have Infield and Turf Grooming
needs, then take a look at our MG72-HY (Hybrid) machine.
4 Choices of Operator Lift Control Systems available.
For detailed information on all 4 Lift systems please refer to the
MG72-IN Section in the Catalog.
Pg.
23
MG72-E-GT-tt-hd-wr
Over 90% of
Assembly completed
at the factory!
Compare to many other
machines that require
extensive assembly.
Premium Powder Coated
Finish on all steel parts.
All fastener nuts used
are lock nuts.
Exclusive Spring Tine
Adjustment System.
Each row of Tines
adjusts independently.
hd-WR Lift Control System.
12v Electric Cylinder (heavy duty). “WR” On-Board system complete with
Wireless Remote Control, HD Cylinder, Battery Tray & Plastic Case, Full
Size 12v Battery, Battery Charger (not seen), & Low Battery Monitor.
No wiring required to user tow machine. Versatility of this lift system allows
numerous machines to be used for towing.
Tongue, Hitch and
Chained Hitch Pin.
Hitch Adaptor.
(not seen)
Spring
Tines.
Rubber Mat.
Multi-purpose. Heavy
duty. Unique to the MG72.
Easy to remove with quick
pins when not needed.
1-1/16”
Solid
Axle.
Broom Carriage. Compact, High Performance, and
Adjustable. Exclusive Engineering. Follows contours.
Does not hop! Synthetic Mildew Resistant Bristles.
Easiest Brushes on the market to replace or
rotate by removing one end cap.
No-Air,
No-Flat
Turf
Wheels.
Patent Pending
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Made in USA
Pg.
24
Question: Why do we include the MG72-BR (Broom)
Groomers in the Infield Groomer Section?
Answer: Because our Brush Groomers can be just
What customers are looking for when grooming infields.
4 Choices of Operator Lift Control Systems available.
For detailed information on all 4 Lift systems please refer to the
MG72-IN Section in the Catalog.
Pg.
25
MG72-E-BR(2)-tt-st-hw
st-HW Lift Control System.
Premium Powder Coated Finish on all steel
parts. All fastener nuts used are lock nuts.
12v Electric Cylinder (standard duty). “HW” wiring package complete with
dash-mount rocker switch, wiring, connectors, fittings & protective sleeve to
be installed on a 12 volt towing machine.
Wiring installation required on user tow machine. For machines
other than 12v user must supply voltage converter.
Tongue, Hitch
and Chained
Hitch Pin.
Hitch Adaptor.
Wire Connector.
Connects to rear of tow machine.
2 Complete 6 ft. wide Broom Carriages.
Compact, High Performance, &
Adjustable. Exclusive Engineering.
Follow contours. Do not hop!
Unique to the MG72.
1-1/16” Solid Axle
Easiest Brushes on the
market to replace or rotate.
Remove 2 bolts in the end cap
and all brushes slide out.
Exclusive synthetic bristles
are mildew resistant.
No-Air, No-Flat Turf Wheels.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Patent Pending
Made in USA
Pg.
26
MG72-E-BR(1)-tt-st-hw
st-HW Lift Control System.
Premium Powder Coated Finish on all steel
parts. All fastener nuts used are lock nuts.
12v Electric Cylinder (standard duty). “HW” wiring package complete with
dash-mount rocker switch, wiring, connectors, fittings & protective sleeve to
be installed on a 12 volt towing machine.
Wiring installation required on user tow machine. For machines
other than 12v user must supply voltage converter.
Tongue, Hitch
and Chained
Hitch Pin.
Hitch Adaptor.
Wire Connector.
Connects to rear of tow machine.
1 Complete 6 ft. wide Broom Carriage.
Compact, High Performance, &
Adjustable. Exclusive Engineering.
Follow contours. Do not hop!
Unique to the MG72.
The carriage can be mounted
at either the front or the
rear of the frame.
1-1/16” Solid Axle
Easiest Brushes on the
market to replace or rotate.
Remove 2 bolts in the end cap
and all brushes slide out.
Exclusive synthetic bristles
are mildew resistant.
No-Air, No-Flat Turf Wheels.
Over 90% of Assembly completed at the factory!
Compare to many other machines that require extensive assembly in the field.
Heying Company Alton, Iowa 51003
Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com
Copyright Heying Enterprises. Patent Pending
Patent Pending
Made in USA
Pg.
27