Chapter 17 Power tools Makita and DeWalt

Transcription

Makita_electric_power_tools.fm Page 1421 Saturday, January 31, 2009 5:52 PM
Cordless tools 17
Power tools Makita
POWER TOOLS MAKITA
Cordless tools
Cordless tools
Makita BDF450RFE Cordless Driver Drill 13 mm (1/2") 18V 3,0 Ah Lithium-Ion
z Very compact body and light weight design.
z Original 4-pole motor for power, light weight and compact size.
z Best fit ergonomic grip shape.
z LED job light with afterglow function.
z "Single sleeve" keyless chuck allows for easy one-hand bit replacement.
Technical data
Technical data
Max. fastening torque (Hard/soft) 41/25 Nm
Dimensions (LxWxH)
Charge time
25 minutes
Net weight
Sound level
72 (d B (A))
Capacity in steel
Battery BL1830 Li-ion
18 V, 3,0 Ah
No load speed (rpm), Hi
Capacity in wood
27 mm (1-1/16")
No load speed (rpm), Lo
Art.no.
Description
BDF450RFE Cordless Driver Drill 13 mm (1/2"), 18V
353287
186x79x244 mm
1,7 kg
13 mm (1/2")
0-1400/
0-400
Standard equipment
Battery BL1830 Li-ion (2 pcs)
Makstar Charger DC18RA
Plastic bag
Bit
Belt clip
Makita BDF440RFE Cordless Driver Drill 13 mm 14,4 V, 3,0 Ah Lithium-Ion
z Very compact body and light weight design.
z LED Job light with afterglow function.
z "Single sleeve" keyless chuck allows for easy one-hand bit replacement.
Technical data
Technical data
Max. fastening torque (Hard/soft)
41/25 Nm
Charge time
Dimensions (LxWxH)
186x79x204 mm
Net weight
14,4 V, 3,0 Ah
Sound level
Capacity in wood
27 mm (1-1/16")
Capacity in steel
0-1400
Art.no.
Description
BDF440RFE Cordless Driver Drill 13 mm (1/2"), 14,4V
353257
Accessories
1940653
25 minutes
1,6 kg
73 (d B (A))
13 mm (1/2")
0-400
Standard equipment
Bit
Belt clip
Plastic bag
Makita 6317DWDE Cordless Driver Drill 13 mm (1/2"), 12 V, 2,6 Ah
z Drill mode+16 torque settings on screwdriver mode for versatility.
z Independently replaceable armature for less maintenance cost.
Technical data
60/25 Nm
Dimensions (LxWxH)
243x94x247 mm
Net weight
2,0 kg
Sound level
72 (d B (A))
Charge time
60 minutes
Battery 1234
12 V, 2,6 Ah Ni-MH
Capacity in steel
13 mm (1/2")
Capacity in wood
25.4 mm (1")
No load speed (rpm) Lo
0-400
No load speed (rpm) Hi
0-1300
Art.no.
Description
6317DWDE Cordless Driver Drill 13 mm (1/2"), 12V
353020
Standard equipment
Battery 1234 (2 pcs)
Charger DC1414
Bit
Plastic bag
1421
Power tools Makita
17 Cordless tools
Makita 6270DWDLE Cordless Driver Drill 10 mm (3/8"), 12 V, 2,6 Ah with lamp
z Compact design with an overall length of only 192 mm (7-9/16").
z Weighs only 1.5 kg (3.3lbs) for reduced operator fatigue.
z All metal gear construction for extremely increased transmission reliability.
z Increased output power for more work efficiency.
Technical data
Technical data
30/18 Nm
Dimensions (LxWxH)
Net weight
1,5 kg
Charge time
Battery 1234
12 V, 2,6 Ah, Ni-MH
Capacity in steel
Capacity in wood
25 mm (1")
0-1200
Flashlight ML120
Art.no.
Description
6270DWDLE Cordless Driver Drill 10 mm (3/8"), 12V
353099
192x94x239 mm
60 minutes
10 mm (3/8")
0-350
Standard equipment
Charger DC1414
Plastic bag
Bit Ph2-65
Makita BHP454RFE Cordless Percussion Driver Drill 13 mm (1/2"), 18 V, 3,0 Ah Lithium-Ion
z High operation efficiency with high torque.
z Robust body construction with aluminum gear housing.
z Twin LED job light with afterglow function.
z Anti-slip rubberized side grip.
Technical data
Technical data
80/40 Nm
Impacts per minute (ipm) 3rd
Net weight
2,2 kg
Number of charging
Sound level
86 (d B(A))
Chuck
Charge time
22 minutes
Dimensions (LxWxH)
Capacity in steel
13 mm (1/2")
Battery BL1830 Li-Ion
Capacity in masonry
16 mm (5/8")
Capacity in wood
Capacity in wood
65 mm
No load speed (rpm) 1st
No load speed (rpm) 2nd
0-600/
No load speed (rpm) 3rd
Impacts per minute (ipm) 1st
0-4500
Impacts per minute (ipm) 2nd
Art.no.
Description
BHP451RFE Cordless Percussion Driver Drill 13 mm (1/2"), 18V
353332
0-25500
12000 chargings
13 mm
xxmm
18 V, 3,0 Ah
65 mm (2-9/16")
0-300
0-1700
0-9000
Standard equipment
Battery BL1830 Li-Ion (2 pcs)
Charger DC18RA
Bit
Plastic bag
Makita BHR240RFE Cordless Rotary Hammer 18 mm, 18V Lithium-Ion, 2x3,0 Ah
z Light Weight although being a 3-mode rotary hammer.
z 3 Mode settings Hammering with rotation", Hammering only".
z "Rotation only".
z Powered by 18V Li-ion Battery.
z Ergonomic handle angled and contoured for perfect tool control and minimum hand fatigue and pain.
z Side handle of new design uses elastomer for non-slip yet soft grip.
Technical data
Technical data
Sound level
99 (d B (A))
Impacts per minute (ipm)
0-4000
Dimensions (LxWxH)
410x78x206 mm
Net weight
3,0 kg
Charge time
25 minutes
Strength
1,9 Joule
No load speed (rpm)
0-1150
Capacity in steel
13 mm (1/2")
Capacity in concrete
18 mm (11/16")
Tool holder
SDS+
Capacity in wood
32 mm (1-1/16")
Art.no.
Description
BHR240RFE Cordless Rotary Hammer 18 mm (11/16") 18V
353288
Standard equipment (not Z model)
Battery 1830 18V (2 pcs)
Charger DC18RA
Depth stop
Side Grip
Plastic bag
Makita BHR162RFE Cordless Rotary Hammer 16 mm 14,4V Lithium 2x3,0 Ah
z Light weight at 2.1 kg. LED Job light with afterglow function
z Ergonomic handle for perfect tool control and minimum hand fatigue and pain.
z Dual operation mode "Rotation only" + "Hammering with Rotation".
z Side handle of new design uses elastomer for non-slip yet soft grip.
z Conveniently located push button for rotation reverse.
Technical data
Technical data
Standard equipment
16 mm (5/8")
Sound level
d70 (d B (A))
Side Grip
Capacity in wood
24 mm (15/16")
Net weight
2,1 kg
Depth stop
Capacity in steel
13 mm (1/2")
No load speed (rpm)
0-1500
Plastic bag
Tool holder
SDS+
Charge time
25 minutes
Battery 1430 14,4V (2 pcs)
Impacts per minute (ipm) 0-5000
Net weight
2,1 kg
Dimensions (LxWxH)
296/79/250 mm
Battery BL1430
2x3,0 Ah Li-Ion
Art.no.
Description
BH162RFE Cordless Rotary Hammer 16 mm (5/8"), 14,4V, incl. Batteries and Charger
353256
1422
Cordless tools 17
z Very compact body with overall length of only 146 mm.
z Weights only 1.5 kg for easy handling.
z Ergonomically designed rubberized grip.
z Phosphorescent bumper.
z LED Job light with afterglow function.
Technical data
Technical data
Max. fastening torque
145 Nm
Dimensions (LxWxH)
Net weight
1,5 kg
Charge time
Tool holder
1/4" hex
Capacity machine screw
M4-M8
Capacity standard bolt
No load speed (rpm)
0-2300
Art.no.
Description
BTD140RFE Cordless Impact Driver, 18V
353297
Accessories
Drill chuck assembly for Impact Driver
1942508
146x79x235 mm
25 minutes
18 V, 3,0 Ah
M5-M14
0-3200
Standard equipment
Bit Ph2 - 65 mm
Plastic bag
Power tools Makita
Makita BTD140RFE Cordless Impact Driver, 18V Lithium-Ion
Makita BTD130FRFE Cordless Impact Driver 14,4 V Lithium-Ion
z Compact design with an overall length of only 146 mm (5-3/4").
z Light weight only 1.4 kg (including a battery) but new DC motor generates high fastening torque.
z Phosphorescent (glows-in-the-dark) bumper.
z LED job light starts lighting up before DC motor revolves.
z Hammer case without screw hole protrusions.
Technical data
Technical data
Sound level
90 (d B(A))
Charge time
140 Nm
Tool holder
Dimensions (LxWxH)
146x79x235 mm
Net weight
1,4 kg
No load speed (rpm)
M5-M14
Impacts per minute (ipm) 0-3200
Art.no.
Description
BTD130FRFE Cordless Impact Driver, 14,4V
353248
25 minutes
1/4" hex
M4-M8
0-2400
14,4 V, 3,0 Ah
Standard equipment
Bit Ph2 - 65 mm
Plastic bag
Makita TD020DSE Cordless Impact Driver 7,2 V, 1,0 Ah Lithium-Ion
z Compact body only with impact mechanism. Lightweight 530 g.
z Convertible from straight- to pistol-type impact driver.
z Spindle lock system enable to be used as a hand screwdriver.
z LED Job Light can be turned on/off with an independent switch.
z Reversing switch is conveniently positioned for easy operation.
Technical data
Sound level
Capacity machine screw/standard bolt
No load speed (rpm)
Net weight
Dimensions
Battery
Charge time
Art.no.
Description
TD020DSE Cordless Impact Driver, 7,2V
353230
92 (d B(A))
M3-M8 (1/8" - 5/16")
3000
2300
20 Nm
0,53 kg
276 x 40 mm
7,2 V, 1,0 Ah Li-Ion
30 minutes
Standard equipment
Charger DC07SA
Battery BL7010 (1 pc)
Makita BTL061RFE Cordless Angle Impact Driver, 18V Li-Ion
z Compact angle head for easy access in tight places.
z The head height of 53 mm ensures easy access to screws in tight places.
z Conveniently located reverse switch.
z Ergonomically designed handle with rubberized grip provides more control and comfort.
Technical data
Technical data
60 Nm
Net weight
Charge time
22 minutes
Tool holder
18 V, 3,0 Ah
No load speed (rpm)
0-2000
0-3000
Dimensions (LxWxH)
Art.no.
Description
BTL061RFE Cordless Angle Impact Driver, 18V
353320
1,6 kg
1/4" hex
M4-M8
M4-M8
387x78x116 mm
Plastic bag
Bit PH2
1423
Power tools Makita
17 Cordless tools
Makita BTS130RFE Cordless Oil-Impulse Driver 14,4V Lithium-Ion
z Incredibly low noise operation thanks to the impact mechanism using oil unit instead of anvil and hammer.
z With the cooling system for oil unit, capable of long continuous operation.
z Ergonomically designed rubberized grip.
Technical data
Technical data
Tool holder
1/4" hex
M6-M10
No load speed (rpm)
0-1600
Dimensions (LxWxH)
Net weight
1,7 kg
Charge time
14,4 V, 3,0 Ah
Art.no.
Description
BTS130RFE Cordless Oil-Impulse Driver, 14,4V
353251
Standard equipment
Bit Ph2 - 65 mm
Plastic bag
M4-M8
0-2400
183x79x240 mm
25 minutes
30 Nm
Makita BTW251RFE Cordless Impact Wrench 1/2" (12.7 mm), 18V 3,0 Ah, Li-Ion
z High torque to weight ratio at 230 N.m (2,040in.lbs).
z Compact provides more control and maneuverability.
z High power, compact and lightweight 4-pole motor.
z Ergonomically designed handle with rubberized grip provides more control and confort.
Technical data
230 Nm
Plastic bag
Tool holder/square
1/2" (12,7 mm)
Sound level
101 (d B(A))
DC18RA
Battery 1830
18 V, 3,0 Ah, Li-Ion
Charge time
25 minutes
Net weight
1,7 kg
No load speed (rpm)
0-2100
0-3200
Dimensions (LxWxH)
165x79x234 mm
Art.no.
Description
BTW251RFE Cordless Impact Wrench 1/2" (12.7 mm), 18V
353281
Makita BTW250RFE Cordless Impact Wrench 12,7 mm (1/2") 14,4V 3,0 Ah, Li-Ion
z High torque to weight ratio at 230 N.m (2,040in.lbs).
z Compact provides more control and maneuverability.
z High power, compact and lightweight 4-pole motor.
z Ergonomically designed handle with rubberized grip provides more control and comfort
Technical data
Standard equipment (not Z-model)
Sound level
101 (d B(A))
230 Nm
DC14RA
Dimensions (LxWxH)
165x79x234 mm
Plastic bag
0-3200
Net weight
1,6 kg
No load speed (rpm)
0-2200
Charge time
25 minutes
Tool holder/square
1/2" (12,7 mm)
Battery 1430
14,4 V, 3,0 Ah, Li-Ion
Art.no.
Description
BTW250RFE Cordless Impact Wrench 12,7 mm (1/2"), 14,4V
353259
Makita BSS610RFE Cordless Circular Saw 165 mm, 18 V, 3,0 Ah Lithium-Ion
z Lightweight and compact design.
z Smooth and powerful cutting at the high rotational speed of 3,700 rpm delivered from enhanced motor.
z Easy to trace cutting line with LED job light and Built-in blow-off nozzle.
z Rubberized soft grip of ergonomic design.
z Safety cover with calibration mark embossed alminum base.
Technical data
Technical data
Blade diameter
165 mm (6-1/2")
Spindle diameter
Sound level
91 (d B (A))
Capacity at 45q
Capacity at 90q
0-57 mm (2-1/4")
No load speed (rpm)
Capacity at 50q
0-36 mm (1-7/16")
Dimensions (LxWxH)
Charge time
25 minutes
Charge time
Net weight
3,2 kg
Plastic bag
18 V, 3,0 Ah
Art.no.
Description
BSS610RFE Cordless Circular Saw 165 mm (6-1/2"), 18V
353294
1424
20 mm
0-40 mm (1-9/16")
3700
347x202x228 mm
45 minutes
Blade
Hex Wrench
Parallel stop
Battery BL1830 Li-Ion x 2
Charger DC18RA
Cordless tools 17
z High accuracy and high efficiency.
z Low vibration and low noise.
z Toolless push-in lock system enables extremely quick blade changes.
z Rubber Dust Seal at Rod and Retainer shuts out dust.
z Large trigger switch is easy to operate with gloved hand.
Technical data
Technical data
Capacity in wood at 90q
135 mm (5-5/16") Capacity in steel at 90q
Strokes per minute (ipm)
0-2600
Length of stroke
Dimensions (LxWxH)
257/73/208 mm
Net weight
Art.no.
Description
BJV180RF Cordless Jig Saw, 18V
353284
Hex Wrench
Cover plate of plastic
1 pc Battery BL1430 Li-ion alt. BL1830 Li-ion
10 mm (3/8")
26 mm (1”)
2,8 kg
Power tools Makita
Makita BJV180RF Cordless Jig Saw, 18V, 3,0 Ah Lithium-Ion
Makita BJV140RF Cordless Jig Saw 14,4V, 3,0 Ah Lithium-Ion
z High accuracy and high efficiency.
z Low vibration and low noise.
z Toolless push-in lock system enaldes quick extremely fast blade changes.
z Sawdust blowing feature.
z Rubber Dust Seal at Rod and Retainer shuts out dust.
z Large trigger switch is easy to operate with gloved hand.
Technical data
Technical data
Capacity in wood at 90q
135 mm (5-5/16")
Capacity in steel at 90q
Strokes per minute (ipm) 0-2600
Length of stroke
Dimensions (LxWxH)
258x73x209 mm
Net weight
Art.no.
Description
BJV140RF Cordless Jig Saw, 14,4V
353262
10 mm (3/8")
26 mm (1”)
2,7 kg
Standard equipment (not Z-model)
Hex Wrench
1 pc Battery BL1430 Li-ion alt. BL1830 Li-ion
Makita BPB180RFE Cordless Portable Band Saw, 18V Li-Ion
z Light weight and well balanced tool design.
z Electronic current limiter for overload protection (with Warning Lamp).
z Single-Light LED Job Light with afterglow function.
z Speed Preset Dial allows to adjust the blade speed to suit workpiece material or desired finish.
z Ergonomically designed handle with elastomer surface for anti-slip, firm grip.
z Bumper protects tool body when putting down on the floor.
Technical data
Blade speed
84 m-162 m/min
Capacity in Round workpiece (dia.)
120 mm (4-3/4")
Capacity in Rectangular workpiece without stand
120x120 mm (4-3/4" x 4-3/4")
Dimensions (LxWxH)
523x231x313 mm
Net weight
6,4 kg
Art.no.
Description
BPB180RFE Cordless Portable Band Saw, 18V
353302
Standard equipment
Band, Hss BiMetal, 18T
Key
Transport case
Charger 18V
18V, 2x3,0 Ah 1830 Li-Ion Batteries
Makita BJR181RFE Cordless Recipro Saw 18 V, 3,0 Ah Lithium-Ion
z Extra high cutting speed model with large variable speed trigger.
z Tool-less blade change and toolless shoe adjustment.
z Dust preventing air flow protects the front head mechanism.
z Best fit ergonomic grip shape for overhead application with gloved hand.
z Two-light type LED job light with afterglow function.
z With sky hook.
Technical data
Strokes per minute
(spm)
Dimensions (LxWxH)
Net weight
Art.no.
353290
Accessories
1942045
0-2900
499x91x234 mm
3,7 kg
Technical data
Length of stroke
28 mm (1-1/8")
Battery BL1830 Li-Ion (2 pcs)
Sound level
Charge time
84 (d B (A))
25 minutes
18 V, 3,0 Ah
Charger DC18SC
Saw blade
Plastic bag
Description
BJR181RFE Cordless Recipro Saw, 18V
Battery 18V BL1830
1425
Power tools Makita
17 Cordless tools
Makita BGA452FRE Cordless Angle Grinder 115 mm (4-1/2"), 18V, Lithium-Ion
z Powerful angle grinder now free from cord.
z Capable of using wheels / discs for AC Grinders.
z Easy-to-grip, small circumference motor housing.
z Anti-restart function for safety (with warning lamp).
z Electronic current limiter (with warning lamp).
Technical data
Technical data
Depressed center wheel 115 mm (4-1/2")
No load speed (rpm)
10 000
Dimensions (LxWxH)
317x129x126 mm
Net weight
1,9 kg
Charge time
25 minutes
2x18V, 3,0Ah
Art.no.
Description
BGA452RFE Cordless Angle Grinder 115 mm (4-1/2"), 18V
353300
Battery BL1830 Li-Ion 2 pcs
Lock nut wrench
Number/pack
1
Makita BML185 Rechargeable Flashlight 18 V Lithium-Ion
z 4 position pivoting head with positive stops at 0, 45, 90, 110 degrees.
z Replacement Xenon bulb stored in the head case.
z With overdischarge protection circuit.
z Falling impact strength of 1m enough to protect the bulb.
z For Li-ion battery 18V 3.0Ah BL1830.
Technical data
Technical data
Burn time per charging Approx. 5 hours
Bulb
Overall length
299 mm (12-3/4")
Net weight
Battery BL1830
18 V (not included)
Art.no.
Description
BML185 Rechargeable Flashlight, 18V
353299
18 V Xenon
0,36 kg
Standard equipment
Extra bulb
Shoulder Strap
Makita ML120 Rechargeable Flashlight 12 V
z 4 position pivoting head.
z Comes with a convenient carrying strap and two flashlight bulbs.
Technical data
Voltage
Burn time per charging
Dimension (LxWxD)
Net weight
Bulb
Battery 1200/1202/1220/1222/1233/1234/1235
Art.no.
Description
ML120 Rechargeable Flashlight, 12V
1927497
12 V, 0,7 A
110-170 minutes
300×90×95 mm
0,26 kg
50 hours
12 V (not included)
Standard equipment
Carrying Strap, 1,2 m
Extra bulb
Clamp handle
Makita BML145 Rechargeable Flashlight 14,4V Li-Ion Extreme
z Replacement Krypton bulb stored in the head case.
z Falling impact strength of 1 m enough to protect the bulb.
z For Li-ion battery 14.4V 3.0Ah BL1430.
Technical data
Voltage
Overall length
Bulb
Art.no.
353270
Technical data
14,4 V
284 mm (12-3/4")
Net weight excl. battery
50 hours
Battery BL1430
Description
BML145 Rechargeable Flashlight, 14,4V
220 minutes
0,37 kg
14,4 V, 3,0 Ah (not included)
Makita BML184 Rechargeable Job Site Light 14,4+18V Lithium-Ion
z Fluorescent light provided with flash light.
z Rubberized grip.
Technical data
Burn time/charging
11 hours with 14,4V Li-Ion
Burn time/charging
15 hours with 18V Li-Ion
Bulb
Xenon lamp for extra light
Net weight
0,4 kg
Overall length
370 mm (14-1/2”)
Battery
14,4V alt. 18V Lithium-Ion
Art.no.
Description
BML184 Rechargeable Job Site Light, 14,4+18V
353310
1426
Standard equipment
Shoulder Strap 1,2 m
Extra bulb
Cordless tools 17
Power tools Makita
Makita Combokit, 4-pack LXT 18 V /418K
Machines included in the Combokit
3 Machines, 1 Flashlight, 2 Batteries BL1830, 3,0 Ah Lithium-Ion and one Charger DC18RA.
Art.no.
353276
Description
Makita 4-pack LXT 18V Combokit/418K
BJR181 Cordless Recipro Saw 18 V, 3,0 Ah Lithium-Ion
z Extra high cutting speed model with large variable speed trigger.
z Tool-less blade change and toolless shoe adjustment.
z Dust preventing air flow protects the front head mechanism.
z Best fit ergonomic grip shape for overhead application with gloved hand.
z Two-light type LED job light with afterglow function.
z With sky hook.
Technical data
BJR181 Recipro Saw
Strokes per minute (spm)
Length of stroke
Dimensions (LxWxH)
Charge time
Net weight
0-2900
28 mm (1-1/8")
499x91x234 mm
25 min
3,7 kg
BSS610SF Cordless Circular Saw 165 mm (6-1/2"), 18 V, 3,0 Ah Lithium-Ion
z Lightweight and compact design.
z Smooth and powerful cutting at the high rotational speed of 3,700 rpm delivered from enhanced motor.
z Easy to trace cutting line with LED job light and Built-in blow-off nozzle.
z Safety cover with calibration mark embossed alminum base.
Technical data
BSS610SF Circular Saw
Blade diameter
Spindle diameter
Capacity at 90q
Capacity at 45q
Capacity at 50q
No load speed (rpm)
Dimensions (LxWxH)
Net weight
Charge time
165 mm (6-1/2")
20 mm
0-57 mm (2-1/4")
0-40 mm (1-9/16")
0-36 mm (1-7/16")
3700
347x202x228 mm
3,2 kg
25 min
BHP451 Cordless Percussion Driver Drill 13 mm (1/2"), 18 V, 3,0 Ah Lithium-Ion
z High operation efficiency with high torque.
z Robust body construction with aluminum gear housing.
z Twin LED job light with afterglow function.
z Anti-slip rubberized side grip.
Technical data
BHP451 Percussion Driver Drill
Chuck
Capacity in steel
Capacity in wood
Capacity in masonry
No load speed (rpm) 1st
No load speed (rpm) 2nd
No load speed (rpm) 3rd
Impacts per minute (ipm) 1st
Impacts per minute (ipm) 2nd
Impacts per minute (ipm) 3rd
Max. fastening torque Hard/soft
Net weight
Charge time
13 mm
13 mm (1/2")
65 mm (2-9/16")
16 mm (5/8")
0-300
0-600/
0-1700
0-4500
0-9000
0-25500
80/40 Nm
2,2 kg
25 min
BML185 Rechargeable Flashlight 18 V Lithium-Ion
z Replacement Xenon bulb stored in the head case.
z Falling impact strength of 1m enough to protect the bulb.
z For Li-ion battery 18V 3.0Ah BL1830.
Technical data
Overall length
Battery BL1830
Approx. 5 hours
299 mm (12-3/4")
18 V (not included)
Technical data
Bulb
Net weight
18 V Xenon
0,36 kg
Standard equipment
Extra bulb
Shoulder Strap
1427
Power tools Makita
17 Cordless tools
Makita Combokit DK1420 14,4V Lithium-Ion
Makita BDF440 Driver Drill and BTD130 Impact Driver.
All machines in the Extreme series have 2 years warrenty, also the included batteries.
The machines are packed in a Plastic bag, and supplied with one Charger and double 3,0Ah Batteries.
Art.no.
353240
Description
Makita Combokit DK1420, 14,4V Lithium-Ion
Technical data
BDF440 Driver Drill
Capacity in steel
Net weight
Driver Drill
13 mm
0-400
38 Nm
1,6 kg
Technical data
BDF440 Driver Drill
Capacity in wood
Dimensions (LxWxH)
Standard equipment
27 mm
0-1400
186x79x204 mm
14,4 V, 3,0 Ah
Technical data BTD130 Impact Driver
Tool holder
No load speed (rpm)
Dimensions (LxWxH)
Net weight
Charge time
Makstar Charger DC14SC
Plastic bag
Bit
1/4" hex
M4-M8
M5-M14
0-2400
0-3200
140 Nm
146x79x235 mm
1,4 kg
25 minutes
14,4 V, 3,0 Ah
Makita Batteries and Charger
BATTERIES
Li-ion
Ni-MH
Art.no.
9135
1930587
BL1430
1940653
BL1830
1942045
CHARGER incl. time reference chart (minutes)
DC1439 DC1414 DC1822 DC1801 DC24SA DC18RA DC14SC
Art.no.
Art.no.
Art.no.
Art.no.
Art.no.
Art.no.
1929350 1938640 1934395 1928168 1931096
1939620
9,6 V 3,0 30
70
70
90
40*
40*
55*
Ah
14,4 V
22
3,0 Ah
18 V
22
3,0 Ah
Current
* with adapter 1932068
Charger Universal Ni-MH/Ni-Cd
Art.no.
1938640
Description
Charger Universal DC1414
For Ni-MH and Ni-Cd batteries 7,2-14,4 V
Charger for Li-ion Batteries
Art.no.
1943376
Description
DC18RA Charger "Slide on"
Art.no.
7631753
7631965
Description
Keyless Drill Chuck 13 mm
Keyless Drill Chuck 13 mm
For Li-ion batteries
Keyless Drill Chuck
Fits machine
BDF440, BDF430F, BHR440
BDF451, BHR451
Drill chuck assembly with 1/4" attachment
Art.no.
1942508
1428
Description
Drill chuck with 1/4 attachment, 10 mm, over 80 Nm
Number/pack.
1
DC1804
Art.no.
1938276
70
Electric power tools 17
Drilling / Fastening
Makita 6501X High Speed Drill 6.5 mm (1/4")
z With depth gauge for uniform hole depth.
z With 4,500 rpm high speed rotation, ideal for fast drilling of small holes.
z Compact body weighs only 0.9 kg for superior handling.
z With keyless chuck.
Technical data
Technical data
Sound level
77 (d B((A)
Power supply cord
Capacity in steel
6.5 mm (1/4")
Capacity in wood
Continuous rating Input
230 W
No load speed (rpm)
Overall length
219 mm (8-5/8")
Net weight
Art.no.
Description
6501X High Speed Drill 6.5 mm (1/4")
351011
2.0 m (6.6ft)
9 mm (11/32")
4500
0,9 kg
Standard equipment
Depth stop
Quick chuck
Power tools Makita
Electric power tools
Makita 6408 Drill 10 mm (3/8")
z Variable speed (0-2,500 rpm) for drilling in a variety of materials.
z In-line handle design for maximum power thrust.
z Low noise level for quieter operation.
Technical data
Capacity in steel
Capacity in wood
Net weight
Sound level
Power supply cord
No load speed (rpm)
Overall length
Art.no.
Description
6408 Drill 10 mm (3/8")
351020
10 mm (3/8")
25 mm (1")
1,4 kg
79 (d B (A))
2.5 m (8.2ft)
530 W
0-2500
261 mm (10-1/4")
Makita DP3003 Drill 10 mm (3/8")
z Extra powerful motor provides the higher torque in class.
z Sturdy aluminum gear housing for increased durability.
z Ergonomically designed soft grip for superior control.
z Retractable belt clip allows operation in tight areas.
Technical data
Capacity in steel
10 mm (3/8")
Sound level
81 (d B(A))
710 W
No load speed (rpm)
0-1200
Dimensions (LxWxH)
296x72x196 mm
Art.no.
Description
DP3003 Drill, 10 mm (3/8”)
351007
Technical data
Capacity in wood
Power supply cord
Net weight
32 mm (1-1/4")
2.5 m (8.2ft)
1,8 kg
36 Nm
Standard equipment
Quick chuck
Side Grip
z Heavy-duty performance drill for professionals.
z Variable speed (0-550 rpm) for versatility.
z Weighs only 2 kg for easy handling.
z Rugged industrial chuck.
Technical data
Sound level
86 (d B(A))
Capacity in steel
13 mm (1/2")
510 W
Overall length
275 mm (10-7/8")
Art.no.
Description
DP4700 Drill, 13 mm (1/2")
351005
Technical data
Power supply cord
Capacity in wood
No load speed (rpm)
Net weight
2.5 m (8.2ft)
36 mm (1-3/8")
0-550
2,0 kg
Standard equipment
Side Grip
1429
Power tools Makita
17 Electric power tools
z Extra powerful motor provides the higher torque in class.
z Sturdy aluminum gear housing for increased durability.
z Ergonomically designed soft grip for superior control.
z Retractable belt clip allows operation in tight areas.
Technical data
Capacity in steel
13 mm (1/2")
Sound level
82 (d B (A))
73 Nm
750 W
Dimensions (LxWxH)
308x72x196 mm
Art.no.
Description
DP4003 Drill, 13 mm (1/2")
351006
Technical data
Capacity in wood
Power supply cord
Net weight
No load speed (rpm)
38 mm (1-1/2")
2.5 m (8.2ft)
2,0 kg
0-600
Standard equipment
Side Grip
Quick chuck
Makita TW0350 Impact Wrench 1/2" (12.7 mm)
z Incredibly high torque of 350 N.m (260ft.lbs).
z Rocker type switch for easy forward or reverse operation.
z Externally accessible carbon brushes for easy maintenance.
Technical data
Technical data
350 N.m (260ft.lbs)
Sound level
Power supply cord
2.5 m (8.2ft)
Overall length
Net weight
2,9 kg
Capacity High tensile bolt
M12-M16
2000
No load speed (rpm)
Capacity Square drive
12.7 mm (1/2")
Art.no.
Description
TW0350 Impact Wrench 1/2" (12.7 mm)
352340
93 (d B(A))
282 mm
M12-M22
400 W
2000
Standard equipment
1 pc bolt 24 x 45 mm
Plastic bag
Keyless drill chuck
Art.no.
1928922
1932262
1936169
Range
1,5-13 mm
1,5-10 mm
1,5-13 mm
Spindle
1/2"-20
1/2"-24
For Drill- and Impact Driver
6013BR, 6310, DP4700
DP3003
DP4003, 6347D
Impact Drilling Demolition
Makita HP1621FK Hammer Drill 16 mm (5/8")
z Dual purpose for "Rotation only" and "Rotation with hammering". (With keyless drill chuck.)
z New reversing system allows: Extended service life of carbon brush. no power reduction even in reverse rotation.
z Large trigger switch for easy operation.
z LED job light for more illuminated, accurate work.
Technical data
Technical data
Capacity in steel
13 mm (1/2")
Net weight
1,7 kg
Power supply cord
2.0 m (6.6ft)
Capacity in wood
No load speed (rpm)
0-2.800
Dimensions (LxWxH)
303x68x222 mm
Art.no.
Description
HP1621FK Hammer Drill 16 mm (5/8")
351108
16 mm (5/8")
650 W
30 mm (1-3/16")
0-44.800
Standard equipment
Side Grip with depth stop
Plastic bag
Makita HP2051F 2-Speed Hammer Drill, 20 mm (3/4")
z Slender and compact body with durable metal gear housing. (With keyless drill chuck.)
z Extra-low vibration level for reduced operator fatigue.
z Dual purpose for "Rotation Only" and "Rotation with hammering".
z Built-in torque limiter stops bit rotation when hitting reinforcements.
z Industrial strength keyless chuck.
z Features a built-in LED job light.
Technical data
Technical data
Capacity in steel
13 mm (1/2")
Capacity in wood
40 mm (1-9/16")
Power supply cord
720 W
Net weight
0-1200
Impacts per minute (ipm), Lo
0-24000
Impacts per minute (ipm), Hi
Dimensions (LxWxH)
360x70x220 mm
Art.no.
Description
HP2051F 2-Speed Hammer Drill, 20 mm (3/4")
351115
1430
20 mm (3/4")
2.5 m (8.2ft)
2,3 kg
0-2900
0-58000
Standard equipment
Side Grip with depth stop
Plastic bag
z Light weight and compact design.
z Extra-low vibration under no load running.
z Rotation reversing system using brush holder unit.
z 2 operation modes : Hammering with rotation and rotation only.
z Features LED job light.
Technical data
Technical data
18 mm (11/16")
Capacity in steel
Capacity in wood
24 mm (15/16")
Sound level
Power supply cord
2.5 m (8.2ft)
Tool holder
440 W
No load speed (rpm)
0-5000
Net weight
Dimensions (LxWxH)
279x66x208 mm
Art.no.
Description
HR1830F Rotary Hammer SDS + 18 mm (11/16")
352401
13 mm (1/2")
97 (d B (A))
SDS+
0-1500
1,7 kg
Standard equipment
Side Grip
Depth stop
Plastic bag
Power tools Makita
Makita HR1830F Rotary Hammer SDS + 18 mm (11/16")
Makita HR2470FT Rotary Hammer 24 mm (15/16")
z Quick change keyless drill chuck: from SDS-plus to 3 jaw chuck literally in a second.
z 3 operation modes - hammering, hammering with rotation, rotation.
z Speed and torque in reverse are the same as forward rotation by using Brush Holder Unit.
z One-Touch Sliding Chuck enables easy bit change.
z Easy-to-operate large trigger switch and lock-on button.F
z LED job light for more illuminated, accurate work.
Technical data
Technical data
24 mm (15/16")
Capacity in steel
Capacity in wood
32 mm (1-1/4")
Overall length
Power supply cord
4.0m (13.1ft)
No load speed (rpm)
800 W
Net weight
0-4500
Art.no.
Description
HR2470FT Rotary Hammer 24 mm (15/16")
352414
Standard equipment
13 mm (1/2")
384 mm (15-1/8")
0-1100
2,6 kg
With SDS+ attachment
Art.no.
217025
217026
217027
217023
Description
Bull Point
Flat Chisel
Scaling Chisel
Hollow Gouge
Dimension mm
250
20×250
40×200
22×250
Grip
Art.no.
1349435
1349037
1349100
1519650
For Drills and Impact drilling
Grip HP2051
Grip DP3003 (Complete)
Lock nut wrench, (For removing crank cap for grease change)
Art.no.
7824079
Size mm
35
For Angle Grinder
Spindle thread M14×2 DIN
Cutting
Makita 4131 Metal Cutter 185 mm (7-1/4")
z 185 mm (7-1/4") metal cutter for cutting steel up to 6 mm in thickness.
z Dust-free, high-speed cutting.
z Cuts steel with minimal burrs and burns.
z One-touch dust-box removable.
Technical data
Blade diameter
185 mm (7-1/4")
Sound level
99 (d B(A))
1100 W
Net weight
4,8 kg
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
4131 Metal Cutter 185 mm (7-1/4")
352050
Technical data
Capacity max. cutting
Power supply cord
No load speed (rpm)
Overall length
63 mm (2-1/2")
2.5 m (8.2ft)
3500
358 mm (14-1/8")
Standard equipment
HM-blade 34T
Hex Wrench
Protective glasses
1431
Power tools Makita
Makita JR3050T Recipro Saw 1010 W
z Well built and well balanced Mid-class.
z High cutting efficiency by powerful motor.
z Dust proof design 1 : Air from inside prevent the dust collected around slider.
z Dust proof design 2 : Ring, and rubber seal protect gear room against dust.
z Tool-less blade change system.
z Push the red button for adjusting shoe positions.
Technical data
Sound level
88 (d B(A))
1010 W
Length of stroke
28 mm (1-1/8")
Dimensions (LxWxH)
447x96x170 mm
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
JR3050T Recipro Saw 1010 W
351920
Technical data
Net weight
Capacity in pipe
Capacity in wood
Standard equipment
Saw blade
Plastic bag
0-2800
3,2 kg
90 mm (3-1/2")
90 mm (3-1/2")
Makita JR3070CT Recipro Saw 1510 W
z Extra-low vibration and extra power.
z Feel its comfort with this machine featuring AVT ; counter weight mechanism which helps to reduce vibration.
z Makita's top-end powerful recipro saw.
z Preset dial for speed control for optimal stroke speed for application.
Technical data
Sound level
88 (d B(A))
1510 W
Length of stroke
32 mm (1-1/4")
Dimensions (LxWxH)
485x99x181 mm
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
JR3070CT Recipro Saw 1510 W
351922
Technical data
Net weight
Capacity in pipe
Capacity in wood
Standard equipment
Saw blade
Plastic bag
0-2800
4,2 kg
130 mm (5-1/8")
255 mm (10")
Makita Recipro saw blade
Teeth per inch 7/18: Fast cut for metal (Iron/steel 1.5-8.0 mm, Plastic 5-77 mm).
Teeth per inch 6/11: Fast cut for non-ferrous metal, aluminum, plastics, wood with nail, steel (Iron/steel 5-8 mm, Plastic 5-77 mm,
Wood 5-77 mm).
Teeth per inch 6/10: Fast cut for wood.
Art.no.
9905038
9905044
9905153
Description
Super Express B-05038
Length mm
152
152
203
Teeth per inch
7/18
6/11
6/10
Tooth material
BIM
BIM
HCS
Area of use
Metal
Metal
Wood
Number/pack
5
5
5
Grinding / Sanding
Makita 9555NB Angle Grinder 125 mm (5")
z Compact yet Powerful one-hand Grinder.
z Small circumference barrel grip for easy handling.
z Labyrinth construction protects all ball bearings from dust and debris.
z Armature coated with protective zigzag varnish and Field coated with powder varnish protect motor from dust
and wire breakage, ensuring durability enough for masonry cutting.
Technical data
Technical data
Sound level
85 (d B((A)
Power supply cord
Depressed center wheel
125 mm (5”)
Hole diameter
Spindle
M14 x 2,0
No load speed (rpm)
10000
Dimensions (LxWxH)
Net weight
1,4 kg
Art.no.
Description
9555NB Angle Grinder 125 mm (5")
351551
2.5 m (8.2ft)
22 mm
710 W
258x139x106 mm
Standard equipment
Side Grip
Lock nut wrench
Grinding wheel
Number/pack
1
Makita 9558NB Angle Grinder 125 mm (5")
z High performance motor with enough power for masonry cutting and high heat resistance.
z Labyrinth construction protects all ball bearings from dust and debris.
z Small circumference barrel grip for easy handling.
z Shaft lock for easy wheel changes.
z Easier repairing of gear section assembled with key.
Technical data
Technical data
Sound level
86 (d B(A))
Power supply cord
125 mm (5”)
No load speed (rpm)
11000
Dimensions (LxWxH)
Net weight
1,6 kg
Art.no.
Description
9558NB Angle Grinder 125 mm (5")
351552
1432
2.5 m (8.2ft)
840 W
271x139x106 mm
Standard equipment
Side Grip
Lock nut wrench
Grinding wheel
Number/pack
1
z High 1,100W power anti-dust motor.
z Super Joint System absorbs shock caused by accidental wheel lock and protects gears.
z Toolless Wheel Cover.
z Housing shape is east to grip because of internal Brush Holders.
z Labyrinth construction seals motor and bearings from contamination.
Technical data
Sound level
84 (d B(A))
125 mm (5”)
1100W
Dimensions (LxWxH)
299x139x103 mm
Art.no.
Description
9565H Angle Grinder 125 mm (5")
351508
Technical data
Power supply cord
Spindle
No load speed (rpm)
Net weight
Standard equipment
Side Grip
Lock nut wrench
Grinding wheel
2.5 m (8.2ft)
M14DIN
11.000
1,8 kg
Number/pack
1
Power tools Makita
Makita 9565H Angle Grinder 125 mm (5")
Makita 9565CV Angle Grinder 125 mm (5")
z High 1,400W power anti-dust motor in small circumference barrel grip body.
z Makita's exclusive Super Joint System helps prevent kickback.
z Tool-less quick guard adjustment.
z Automatic brush cut-off.
z Labyrinth construction seals motor and bearings from contamination.
z Electronic speed control with soft-start allows smooth and consistent performance.
Technical data
Technical data
Sound level
82 (d B(A))
Power supply cord
125 mm (5”)
Spindle
1400W
No load speed (rpm)
Overall length
299 mm (11-3/4")
Net weight
Art.no.
Description
9565CV Angle Grinder 125 mm (5")
351515
2.5 m (8.2ft)
M14DIN
2.800-11.000
1,8 kg
Standard equipment
Side Grip
Lock nut wrench
Grinding wheel
Number/pack
1
Makita GA7020SF Angle Grinder 180 mm (7")
z Outstanding durability.
z Increased heat resistance.
z Superior anti-dust structure.
z Machined bevel gear for strength.
z Soft grip for more comfort and control.
z Gear housing can be positioned at every 90 degrees.
Technical data
Technical data
180 mm (7")
Spindle
2200 W
No load speed (rpm)
Dimensions (LxWxH)
473x200x140 mm
Net weight
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
GA7020SF Angle Grinder, 180 mm (7")
351526
M14x2
8500
4,7 kg
Standard equipment
Soft Side Grip
Lock nut wrench
Inner flange
Number/pack
1
z Outstanding durability.
z Increased heat resistance.
z Superior anti-dust structure.
z Machined bevel gear for strength.
z Soft grip for more comfort and control.
Technical data
Technical data
Sound level
89 (d B(A))
Power supply cord
230 mm (9”)
Spindle
2200W
No load speed (rpm)
Dimensions (LxWxH)
473x249x140 mm
Net weight
Art.no.
Description
Makita 9020SF Angle Grinder, 230 mm (9")
351536
2.5 m (8.2ft)
M14x2
6600
4,7 kg
Standard equipment
Soft Side Grip
Lock nut wrench
Inner flange
Dust protection
z Heavy Duty Motor with 2,600W Continuous rating Input.
z Outstanding Durability. Superior Anti-Dust Structure. Machined Bevel Gear. Increased Heat Resistance.
z Low Vibration Rear Handle with Soft Grip for More Comfort and Control.
z Rotatable Rear Handle can be positioned to suit most cutting and grinding opera- tions.
z Protects work piece from scratches Large Rubber Tool Rest.
Technical data
Technical data
Sound level
90 (d B(A))
Power supply cord
230 mm (9”)
Spindle
2600W
No load speed (rpm)
Dimensions (LxWxH)
511x249x140 mm
Net weight
Art.no.
Description
Makita 9040SF Angle Grinder, 230 mm (9")
351538
2.5 m (8.2ft)
M14x2
6600
5,6 kg
Standard equipment
Vibration Rear Handle, Side Grip
Lock nut wrench
Inner flange
Dust protection
Number/pack
1
1433
Power tools Makita
Makita 9227CB Sander-Polisher 180 mm (7")
z Electronic speed control for constant speed under load.
z Soft start feature for smooth start-ups.
z Lock-on button for continuous use at one speed.
Technical data
Technical data
Pad diameter
180 mm
Spindle
Sound level
83 (d B (A))
Vibrations radie
1200 W
No load speed (rpm)
Overall length
470 mm (18-1/2")
Net weight
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
9227CB Sander-Polisher 180 mm (7")
351805
Accessories
Wool pad 180 mm, Velcro fastening
1926297
Polishing sponges, white universal for 2-komp. colours
9921727
Polishing sponges, blue for cellulos and acrylat colours
9921733
Polishing sponges, orange, thinn
9921749
Standard equipment
Clamp handle
Back-up pad
M14×2
6,0 m/s2
0-600/3000
3,0 kg
Wool pad/Wool bonnet/Polishing sponge
Art.no.
1926297
7943665
2625424
9921727
9921733
9921749
Inner flange
Diam mm
180
180
150
150
150
Description
Wool pad (Hook & loop type) with Velcro fastening
Wool bonnet
Sleeve 18 (for centering pads)
Polishing sponges, white universal for 2-komp. colours
Polishing sponges, blue for cellulos and acrylat colours
Polishing sponges, orange, thinn
For Sander-Polisher
9227CB
9217SPC, 9227CB
9227CB
9227CB, BO6040
9227CB, BO6040
9227CB
(For depressed center wheel, diamond wheel and Cutting wheel ). Spindle thread M14x2(DIN).
Art.no.
1922277
Size mm
47
Art.no.
2245430
Size mm
45
Art.no.
2242563
2242571
Size mm
78
78
For Angle Grinder
Spindle thread DIN M14
Lock nut
For Angle Grinder
For 180 mm and 230 mm, Spindle thread M14x2(DIN)
Flange 78
1434
Description/For Angle Grinder
Outer Flange 78 (For cut-off wheel)/Spindle thread DIN M14
Inner Flange 78 (For cut-off wheel)/Spindle thread DIN M14
Makita LS0714 Slide Compound Saw 190 mm (7-1/2") (F, FL,L)
z Laser marker allows easy and accurate alignment with ink line even in bevel cutting or cutting decorative timbers.
z Double sliding mechanism makes it lighter and more compact, requiring smaller work space, allowing quick and
easy transport.
z Fluorescent lamp on flexible arm.
z Max cutting capacity 300 mm (width) (11-3/4").
z Use of short steel poles as 4 rails protects the rails from bending for precision cutting.
Technical data
Technical data
Blade diameter
190 mm (7-1/2")
Spindle diameter
1010 W
No load speed (rpm)
Net weight
12,8 kg
Dimensions (LxWxH)
Capacity at 90º
52×300 mm
Capacity at 45q
Capacity at 57q right
52×165 mm
Capacity leaned 45q, left at 90q
45×212 mm
Capacity leaned 5q, right at 45q
45×300 mm
Power supply cord
Art.no.
Description
LS0714L Slide Compound Saw 190 mm (7-1/2")
352826
Accessories
Carbide-tipped saw blade 190x20, 24T, Neg
9903866
20 mm
6000
670×430×458 mm
52× 212 mm
45×300 mm
45×220 mm
2.5m (8.2ft)
Standard equipment
Chip bag
Vice vertical
HM-blade 24T
Key
Holder set
Power tools Makita
Sawing
Makita LS1013(L) Slide Compound Saw 255 mm (10")
z Laser marker allows easy and accurate alignment with ink line even in bevel cutting or cutting decorative timbers.
z Smooth and accurate - Has set high standard for Dual Bevel Sliding Compound Miter
z Saws for professionals.
z Dual sliding rails with linear ball bearing on each rail enable smooth and accurate cuts.
z Electronic speed control maintains constant speed under load for excellent finish.
z Large table and pivoting fence provide efficient support to stock.
Technical data
Technical data
Net weight
22,0 kg
Dimensions (LxWxH)
760×520×625 mm
No load speed (rpm)
Blade diameter
255-260 mm (10"- 10-1/4") Spindle diameter
Capacity at 90q
91×310 mm
Capacity at 45q
Capacity leaned 45q, left at 90q 50×305 mm
Capacity leaned 45q, right at 90q 31×305 mm
Power supply cord
2.5m (8.2ft)
Art.no.
Description
LS1013L Slide Compound Saw 255 mm (10")
352813
Accessories
Carbide-tipped saw blade, 260x30, 60 teeth, Neg.
9985014
1430 W
3700
30 mm
91×215 mm
50×215 mm
31×215 mm
Standard equipment
Chip bag
Vice (vertical)
Key
HM-blade 60T
Holder set
Sub fence complete (right)
Makita Saw Bench Universal
z Fits most Slide Compound Saws.
z Easy to mount, adjust and transport.
z Length stop.
z Adjustable length (1190-3150 mm).
z With mounted castors.
Technical data
Material
Length
Width
Art.no.
444000070
Galvanized steel
1190-3150 mm
250 mm
Description
Saw Bench Universal
Technical data
Height
Weight
780 mm
24 kg
Standard equipment
Adjustable support leg
Makita 5604R Circular Saw 165 mm (6-1/2")
z All ball bearing construction for extended service life.
z With anti kickback riving knife.
Technical data
Sound level
Blade diameter
Capacity at 90q
Overall length
Art.no.
352004
93 (d B(A))
165 mm (6-1/2")
54 mm (2-1/8")
950 W
320 mm (12-5/8")
Technical data
Power supply cord
Spindle diameter
Capacity at 45q
No load speed (rpm)
Net weight
2.5 m (8.2ft)
20 mm
35 mm (1-3/8")
5000
3,6 kg
Standard equipment
HM-blade
Rip Fence
Hex Wrench
Description
5604R Circular Saw 165 mm (6-1/2")
1435
Power tools Makita
Makita 5704RK Circular Saw 190 mm (7-1/2")
z Low noise and vibration sawing for increased operator comfort.
z All ball bearing construction for extended service life.
z With anti kickback riving knife.
Technical data
Technical data
Blade diameter
190 mm (7-1/2")
Spindle diameter
Capacity at 90q
66 mm (2-5/8")
Capacity at 45q
1100 W
No load speed (rpm)
Overall length
345 mm (13-5/8")
Net weight
Power supply cord
2.5 m (8.2ft)
Art.no.
Description
5704RK Circular Saw 190 mm (7-1/2")
352016
30 mm
46 mm (1-13/16")
4900
4,6 kg
Standard equipment
HM-blade
Rip Fence
Hex Wrench
Makita SP6000 Plunge Cut Circular Saw, 165 mm (6-1/2")
z High accurate, clean cutting.
z Tip-resistant design.
z Depth stopper enables to easily cut a preliminary groove at a depth of 2 mm (1/16") for splinter-free cuts.
z The position of cutting line is always the same regardless of bevel angle in cutting with guide rail attached.
z Close-to-wall cutting only 18 mm (11/16") away from wall at minimum.
z Bevel cut -1 to 48 degrees.
Technical data
Technical data
Blade diameter
165 mm (6-1/2")
Spindle diameter
Capacity at 90º
56 mm (2-3/16")
Capacity at 45º
Capacity at 48q
38 mm (1-1/2")
No load speed (rpm)
2000-5200
Dimensions (LxWxH)
Net weight
4,1 kg
Power supply cord
Art.no.
Description
SP6000 Plunge Cut Circular Saw, 165 mm (6-1/2")
352027
Accessories
Guide rail, 1400 mm
1943685
Guide rail, 3000 mm
1943677
20 mm
40 mm (1-9/16")
1300 W
341x225x250 mm
2.5 m (8.2ft)
Standard equipment
HM-blade
Makita 4350FCT Jig Saw with build-in LED
z Toolless blade change system. (With electronic control + speed dial.)
z Electronic speed control maintains consistent speed set for various workpiece.
z 3 orbital settings plus straight cut.
z Built-in LED job light for easy tracing of cutting line.
z Plastic Cover Plate can be attached without tool.
z Low vibration and low noise level.
Technical data
720 W
Net weight
2,4 kg
Capacity in steel 90º
10 mm (3/8")
Length of stroke
26 mm (1")
Art.no.
Description
4350FCT Jig Saw with build-in LED
351914
Technical data
Power supply cord
Capacity in wood 90q
Dimensions (LxWxH)
2.5 m (8.2ft)
135 mm (5-5/16")
800-2800 / min
236x73x204 mm
Standard equipment
Saw blade
Anti-Splitering Device
Hex Wrench
Makita 4351FCT Jig Saw straight with build-in LED
z Toolless blade change system. (With electronic control + speed dial.)
z Electronic speed control maintains consistent speed set for various workpiece.
z 3 orbital settings plus straight cut.
z Built-in LED job light for easy tracing of cutting line.
z Low vibration and low noise level.
Technical data
Technical data
720 W
Sound level
Power supply cord
2.5 m (8.2ft)
Net weight
Capacity in wood 90q
135 mm (5-5/16")
Capacity in steel 90º
800-2800
Length of stroke
Dimensions (LxWxH)
271x73x188 mm
Art.no.
Description
4351FCT Jig Saw straight with build-in LED and plastic bag
351915
1436
85 (d B(A))
2,4 kg
10 mm (3/8")
26 mm (1”)
Standard equipment
Saw blade
Hex Wrench
Art.no.
9903850
9903866
9903981
9903997
9985020
9985014
Makita type. num Blade diam. mm
190
190
190
190
A-85020**
260
A-85014**
260
Hole diam. mm
20
20
20
20
30/16
30/16
No. teeth Tip mm
24
24
60
60-ALU
100-ALU
2,6
60
2,3
Teeth type
Org.
Neg
Neg
AD
Neg
Neg
Fits machine
LS0714
LS0714
LS0714
LS0714
LS1013, LS1040
LS1013, LS1040
** Makita original blade
Carbide-M tipped saw blade (For wood)
z Faster: Beveled tooth face has two 10 degrees angles to create a more aggressive cut.
z Cleaner: "M" style tip design has more cutting points for a cleaner cut. 48 tooth finish with a 24 tooth blade.
z Lasts Longer: Beveled tooth face and top creates six cutting edges. Greater wear area lasts longer than traditional blades.
Art.no.
9989626
9989632
9989648
9989654
Description
Carbide-M tipped saw blade
Blade diam.
165
165
185
185
Hole diam.
20
20
30
30
No. teeth
16
24
16
24
Tip mm
2,0
2,0
2,0
2,0
Power tools Makita
Carbide-tipped saw blade
Fits machine
SR1600, 5604R, 5603R
SR1600, 5604R, 5603R
SR1800
SR1800
Holder set
Art.no.
3229324
Description
Holder set (1 pc)
For Slide Compound Saw
LS1013
Vertical vise assembly
Art.no.
1225386
NOBB. num.
22524342
Description
Vertical vise assembly
LS1013
Horizontal vise assembly
Art.no.
1224704
Description
Horizontal vise assembly
LS1013
Art.no.
1940027
Description
LS1013
Dust bag assembly
Art.no.
1225239
Description
Dust bag assembly
LS1013, LS1040
Guide rail for circular Saw
Art.no.
1943685
1943677
Description
Guide rail, 1400 mm
Guide rail, 3000 mm
For Circular Saw
SP6000
SP6000
1437
Power tools Makita
Makita Jig Saw blade
HCS (High carbon steel) for cutting softer materials such as wood or plastics
HSS (High speed steel) for cutting harder materials such as metals, aluminium and non-ferrous metals
B-50: For fast finish work in wood and plastic.
B-51: Fast cut for mild steel, stainless steel.
B-52: Fast cut for universal materials.
Art.no.
Description
9906292
9906460
9906476
9906482
Super Express, kit 3 pcs
Super Express, B-50
Super Express, B-51
Super Express, B-52
Length
mm
100
100
100
100
Thickness mm Teeth per inch Bladeform
1,25
8,5/10,6
HCS
0,80
9,8/18,1
HSS
1,0
5,5/9,8
HSS
Area of use
Wood/metal/universal
Wood
Metal
Universal
Heat guns
Makita HG5002K Heat Gun
z Basic heat-gun with a convenient 2 step switch
z Controlling temperature and air-flow.
z Strips paint and varnish, thaws frozen metal pipes, loosens tile and putty.
z Standard equipped with nozzles and plastic case.
Technical data
Air temperature (degrees C)
Air flow
Net weight
Art.no.
Description
HG5002K Heat Gun
354027
1,600W
350 - 500
Hi : 500 L / min / Lo : 300 L / min
0.6 kg (1.46lbs)
Makita HG650CK Heat Gun
z Multi-functional heat-gun with a powerful 2000W motor.
z Electronic temperature Control independent of airflow and power supply.
z Available 7 function programs by operating the select key for your application.
z Standard equipped with nozzles and plastic case.
Technical data
Air temperature (degrees C)
Air flow
Net weight
Art.no.
Description
HG650CK Heat Gun
354022
2,000W
80 - 650
200 - 550 L / min
0.78 kg (1.72lbs)
Heat Gun Accessories
Art.no.
9933679
9933685
9933691
9933700
9933716
9933722
1438
Pos.
1
2
3
4
5
6
Description
Glass protection nozzle 35/45
Wide-slot nozzle 35/50
Reduction nozzle Ø 20 mm 35/Ø20
Reflector nozzle 35/40
Welding nozzle 35/6
Overlap welding nozzle 35/23
For Heat Gun
HG5002, HG650
HG5002, HG650
HG5002, HG650
HG5002, HG650
HG5002, HG650
HG5002, HG650
Number/
pack
3
5
5
5
Dewalt_electric_power_tools.fm Page 1439 Saturday, January 31, 2009 5:45 PM
Cordless tools 17
Power tools DeWalt
POWER TOOLS DEWALT
Cordless tools
Drills
Cordless drill DEWALT DC743KB 12 V
• Powerful 12.0 Volt drill driver for drilling and screwdriving applications
• Compact, lightweight design
• 17 position adjustable torque control for consistent screwdriving into a variety of materials with different screw
sizes
• Two speed settings, variable speed and reverse switch for controllable use
• Ergonomically designed trigger and rubber grip
• 13mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change with one hand
Art. no.
Voltage
Battery Capacity
Chuck Capacity
Power output
No Load Speed
Max Torque
Max. Drilling Capacity [Wood]
Max. Drilling Capacity [Metal]
Weight
Standard Equipment:
1 hour charger, 2 x 2.6Ah NiMH batteries, Heavy duty carrying case
DC743KB-QW
12 V
NiMH 2.6 Ah
1.5-13 mm
240 Watts
0-400 / 0-1450 rpm
35 Nm
28 mm
13 mm
1.75 kg
Cordless drill DEWALT DC732KL 14.4 V
• Powerful 14.4 Volt drill driver for drilling and screwdriving applications
• 17 position adjustable torque control for consistent screwdriving into a variety materials with different screw
sizes
Art. no.
DC732KL-QW
Voltage
14.4 V
Battery Capacity
Li-lon 2.0 Ah
Chuck Capacity
1.5-13 mm
Power output
270 Watts
No Load Speed
0-400 / 0-1450 rpm
Max Torque
37 Nm
35 mm
13 mm
Standard Equipment:
40 minute charger, 2 x 2.0 Ah Li-lon batteries, Heavy duty carrying case
1439
Power tools DeWalt
17 Cordless tools
Cordless drill DEWALT DC722KL 18 V
• Powerful 18 Volt drill driver for drilling and screwdriving applications
• 17 position adjustable torque control for consistent screwdriving into a variety materials with different screw
sizes
Art. no.
DC722KL-QW
Voltage
18 V
Battery Capacity
Li-lon 2.0 Ah
Chuck Capacity
1.5-13 mm
Power output
375 Watts
No Load Speed
0-500 / 0-1700 rpm
Max Torque
41 Nm
38 mm
13 mm
Standard Equipment:
40 minute charger, 2 x 2.0 Ah Li-lon batteries, Heavy duty carrying case
Cordless hammerdrill DEWALT DC927KL 18 V
•
•
•
•
•
•
Powerful 18 Volt combination tool for heavy duty hammerdrilling and screwdriving applications
Three speed settings for optimum performance in high torque, normal use and high speed applications
22 position adjustable torque control for uniform results and optimised precision when screwdriving
Up to 38 Nm of sustained torque for maximum performance
13 mm self-tightening chuck tightens throughout operation providing superior bit gripping strength
Ergonomically designed trigger and rubber grip
Art. no.
DC927KL-XJ
Voltage
18 V
Battery Capacity
Li-lon 2.0 Ah
Chuck Capacity
1.5-13 mm
Power output
425 Watts
No Load Speed
0-450 / 0-1500 / 0-1800 rpm
Beats per Minute
0-7650 / 0-25500 / 0-30600 bpm
Max Torque
38 Nm
50 mm
13 mm
Weight
2.4 kg
Standard Equipment:
40 minute charger, 2 x 2.0 Ah Li-lon batteries, Multi position side handle, Heavy duty carrying case
Reciprocating saws
Cordless reciprocating saw kit DEWALT DC385KB 18 V
• Powerful DEWALT fan cooled motor with replaceable brushes and variable speed delivers fast cutting action up
to 3,000 strokes per minute and 28.6 mm stroke length
• High performance reciprocating mechanism and lightweight magnesium gearcase offer the user optimised power
to weight ratio
• Variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work
safety
• Lever-action keyless blade clamp for quick and easy blade changes
• Modular component design for trouble free servicing
• Rubber coated grip to reduce surface vibration and user fatigue
Art. no.
DC385KB-QW
Voltage
18 V
Battery Capacity
NiMH 2.6 Ah
Power Output
390 Watts
No Load Stroke Rate
0,3000 spm
Stroke Length
28.6 mm
Weight
3.7 kg
Length
435 mm
Height
188 mm
Standard accessories:
1 hour charger, 2 x 2.6 Ah batteries, Wood and metal blade, Heavy duty carrying case
1440
Cordless tools 17
Cordless finishing grinder DEWALT DC410KB 18 V
•
•
•
•
•
•
Powerful DEWALT fan cooled motor with replaceable brushes delivers maximum power and durability
7,000 rpm provides high power for cutting and grinding applications
Keyless Guard for enhanced application versatility
Convenient trigger switch with lock-off button for easier gripping
3 Position side handle offers greater comfort and control
Spindle lock allows users to change their wheels quick and easy
Art. no.
DC410KB-QW
Voltage
18 V
Battery Capacity
NiMH 2.6 Ah
Max. Disc Diameter
115 mm
Power Output
350 Watts
No Load Speed
7000 rpm
Spindle Thread
M14
Weight
3.0 kg
Length
375 mm
1 hour charger, 2 x 2.6 Ah batteries, Keyless protective guard, 3 position side handle, Heavy duty carrying case
Power tools DeWalt
Angle grinders
Cordless finishing grinder DEWALT DC413KL 28 V
•
•
•
•
•
•
Powerful DEWALT fan cooled motor delivers maximum power and durability
6,500 rpm provides high power for cutting and grinding applications
Keyless guard for enhanced application versatility
Convenient trigger switch with lock-off button for easier gripping
2 Position anti vibration side handle offers greater comfort and control
Spindle lock allows users to change their wheels quick and easy
Art. no.
DC413KL-QW
Voltage
28 V
Battery Capacity
Li-lon 2.2 Ah
Max. Disc Diameter
125 mm
Power Output
630 Watts
No Load Speed
6500 rpm
Spindle Thread
M14
Weight
3.3 kg
Length
340 mm
1 hour charger, 2 x 2.2 Ah batteries, Keyless protective guard, 2 position anti vibration side handle, Wrench
Radio chargers
Cordless radio charger DEWALT DC011 7.2-18 V
• Runs off mains and 7.2 Volt to 18 Volt NiCd/NIMH batteries
• Charges DEWALT 7.2 Volt to 18 Volt NiCd/NIMH batteries
• Digital tuner with LCD display, built-in clock, and 8 station memory presets
• Dual pivoting 28 mm flexible antenna provides more durability and better reception
• Heavy Duty AM/FM radio with auxiliary port allows user to listen to the radio or CD (when plugged into auxiliary port)
• Heavy Duty storage case allows storage for CD player and CDs
Art. no.
Voltage
Battery
Radio power source
Radio Frequencies
Charging time
Lenght
Height
Weight
No batteries included
DC011-QW
7.2-18 V
Not included
AC - DC
AM - FM Stereo
30 - 70 min
548 mm
366 mm
6.0 kg
1441
Power tools DeWalt
Electric power tools
Drills
Rotary drills
2 speed rotary drill with clutch DEWALT D21441 770 W
•
•
•
•
•
•
Ideal for use in heavy steel fabrication
Two speed gearbox for increased torque
Improved drilling performance due to new motor wind
Improved ergonomics with new polymer gear case
New gear design to give improved life
Improved unit life with patented armature support
Art. no.
Chuck Capacity
Power Input
Power Output
Max Torque
No Load Speed
Max. Drilling Capacity [Steel]
Spindle Thread
Weight
Standard Equipment:
Multi position side handle, Depth stop
D21441-QS
1.5 - 13 mm
770 Watts
425 Watts
40/20 Nm
0-1100 / 0-2700 rpm
35 mm
13 mm
1/2” x 20 U.N.F
2.3 kg
High speed rotary drill DEWALT DW217 675 W
•
•
•
•
•
•
Ideal for high speed drilling of small, precise holes in metal or wood
High overload capacity motor prevents failure in heavy duty applications
10 mm keyless chuck for quick and easy bit change with one hand to aid productivity
Heavy duty metal gear box for added durability
Soft grip surface on switch and handle to reduce vibration and enhance user comfort
Balance and weight designed for one handed operation
Art. no.
Chuck Capacity
Power Input
Power Output
Max Torque
No Load Speed
Spindle Thread
Weight
Standard Equipment:
None
DW217-QS
0.5 - 10 mm
675 Watts
340 Watts
8.2 Nm
0-4000 rpm
20 mm
8 mm
3/8” x 24 U.N.F
1.2 kg
Rotary drill DEWALT DW221 701 W
• Ideal for drilling applications in wood, aluminium, soft steel and alloys
• High overload capacity motor prevents failure in heavy duty applications
• 10 mm keyless chuck with innovative spindle lock system for quick and easy bit change with one hand to aid
productivity
• Heavy duty metal gear box for added durability
• Soft grip surface on the switch and handle to reduce vibration and enhance user comfort
• Dual cord clamp system to prevent the cord being damaged
Art. no.
Chuck Capacity
Power Input
Power Output
Max Torque
No Load Speed
Spindle Thread
Weight
Standard Equipment:
None
1442
DW221-QS
1.5 - 10 mm
701 Watts
385 Watts
13.8 Nm
0-2500 rpm
25 mm
10 mm
1/2” x 20 U.N.F
1.3 kg
Percussion drill with kit box DEWALT D21805KS 770 W
•
•
•
•
•
Improved ergonomics with new polymer gear case
Art. no.
D21805KS-QS
Chuck Capacity
1.5 - 13 mm
Power Input
770 Watts
Power Output
425 Watts
Max Torque
40/20 Nm
No Load Speed
0-1100 / 0-2700 rpm
35 mm
13 mm
Spindle Thread
1/2” x 20 U.N.F
Weight
2.3 kg
Standard Equipment:
Multi position side handle, Depth stop, Heavy duty carrying case, Keyless chuck
Power tools DeWalt
Percussion drills
Percussion drill with kit box DEWALT D21815KS 850 W
•
•
•
•
•
•
Improved ergonomics with new metal gear case
New Patented ball clutch to give greater user control
Art. no.
Chuck Capacity
Power Input
Power Output
Max Torque
No Load Speed
Blows per Minute
Spindle Thread
Weight
Standard Equipment:
Multi position side handle, Depth stop, Heavy duty carrying case
D21815KS-QS
1.5 - 13 mm
850 Watts
465 Watts
40/20 Nm
0-1100 / 0-2700 rpm
0-18700 / 0-45900 bpm
40 mm
13 mm
1/2” x 20 U.N.F
2.4 kg
Rotary hammers
SDS-Max combination hammer DEWALT D25701K 1300 W
• Drilling anchor fixing and through holes into concrete and masonry from 18 to 48 mm
• Core drilling from 40 to 125 mm
• Rotation-stop for demolition applications in brick, masonry and light chasing in concrete
• DEWALT hammer philosophy design: protect mechanism from dust impact, dampen the rebound and develop
a low vibration mechanism
• Active Vibration Control reduces tri-axial vibration by up to 30% according to the Physical Agents Directive
2002/44/EC – HAV
• Complete Torque Control. The unique patented 2-steps clutch allowed the user to work with a higher protection level. 1st step: small bit (up to 40 mm), 2nd step: higher bit (40 to 48 m) and core bits
Art. no.
Power Input
Power Output
Load Speed
Blows per Minute
Impact Energy
Max. Drilling Capacity [Concrete]
Max. Drilling Capacity [Breakthrough bit]
Weight
Standard Equipment:
Multi position side handle, Grease, Cloth, Heavy duty carrying case
D25701K-QS
1300 Watts
840 Watts
137-275 rpm
1260-2520 bpm
2-14 J
48 mm
80 mm
8.3 kg
1443
Power tools DeWalt
SDS-Plus combination hammer DEWALT D25114K 800 W
•
•
•
•
•
•
Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter
Electronic variable speed for total control in any application
Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete
Impact-stop for drilling in wood, steel, ceramic and screwdriving applications
Safety clutch eliminates sudden high-torque reaction should the bit jam
Ergonomic rubber coated back handle design for improved comfort in use
Art. no.
D25114K-QS
Power Input
800 Watts
Power Output
395 Watts
Load Speed
0-1150 rpm
Blows per Minute
0-4300 bpm
Impact Energy
0-3.4 J
Tool holder
SDS-Plus
30 mm
13 mm
Weight
2.8 kg
Standard Equipment:
Multi position side handle, Depth stop, Quick change 13 mm 3 jaw keyless chuck, Heavy duty carrying case
SDS-Plus hammer DEWALT D25314K 800 W
•
•
•
•
•
•
Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter
Electronic variable speed for total control in any application
Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete
Impact-stop for drilling in wood, steel, ceramic and screwdriving applications
Quick Change Removable Chuck for precise drilling in wood and steel and screwdriving applications
Safety clutch eliminates sudden high-torque reaction should the bit jam
Art. no.
D25314K-QS
Power Input
800 Watts
Power Output
395 Watts
No Load Speed
0-1150 rpm
Blows per Minute
0-4300 bpm
Impact Energy
0-3.4 J
Tool holder
SDS-Plus
30 mm
13 mm
Weight
3.1 kg
Standard Equipment:
Multi position side handle, Quick adjustment depth stop, Quick change 13 mm 3 jaw keyless chuck for rotary
drilling, Heavy duty carrying case
Angle grinders
Small angle grinder DEWALT D28133 1200 W
• No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position.
Switch must be consciously reset before power is delivered
• Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down
• Torque limiting clutch reduces the maximum torque reaction transmitted to the operator if the cutting disc jams
• Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion
and tracking
• Anti vibration side handle to improve user comfort
• New guard design allows guard fitment, adjustment or removal without the use of tools, for increased flexibility
Art. no.
D28133-QS
Power Input
1100 Watts
No Load Speed
10000 rpm
Max. Disc Diameter
125 mm
Spindle Thread
M14
Weight
2.3 kg
Length
315 mm
Height
80 mm
Standard Equipment:
Protective keyless guard, Multi position anti vibration side handle, Inner and outer disc flanges, Spanner
1444
•
•
•
•
•
•
Soft start to limit start up current and reduce kick back
Anti vibration side handle
Quick adjustment tool free guard
Abrasion protected high power motor for increased motor durability
Fully leaded stator windings for increased motor durability
Five position side handle for improved balance in cutting and grinding applications
Art. no.
D28422-QS
Power Input
2400 Watts
Power Output
1680 Watts
No Load Speed
8500 rpm
Max. Disc Diameter
180 mm
Spindle Thread
M14
Weight
6.5 kg
Length
470 mm
Height
145 mm
Standard Equipment:
Protective keyless guard, Anti vibration side handle, Inner and outer flange set, Spanner
Power tools DeWalt
Angle grinder DEWALT D28422 2400 W
Sanders
Palm grip sander DEWALT D26441 230 W
•
•
•
•
•
•
230 Watt motor sands at 14,000 orbits per minute, providing a superior finish
Hook & loop platen allows faster paper change, better dust extraction and increase sanding efficiency
Paper clamps provided for conventional abrasives
Textured anti-slip top and body grip provides ultimate comfort and control during prolonged use
Dust sealed switch for increased durability
Sealed 100% ball-bearing construction provides longer life
Art. no.
D26441-QS
Power Input
230 Watts
Power Output
120 Watts
Rotation Speed
14000 rpm
Orbits per Minute
28000 opm
Orbit Size
1.4 mm
Paper Size
140 x 115 mm
Pad Size
108 x 115 mm
Weight
1.4 kg
Standard Equipment:
Sanding sheets, Paper punch, Dust bag with built-in extractor connection
Palm grip sander DEWALT D26453 280 W
• 280 Watt variable speed motor adjusts from 7,000-12,000 orbits per minute, providing ideal sanding speed for
all materials
• Textured anti-slip top and body grip provides ultimate comfort and control during use
• Dual-plane counter-balance fan reduces vibration and user fatigue
• Dust-sealed switch prevents contamination
• Controlled finishing system controls pad speed and minimises gouging during start up
• Sealed 100% ball-bearing construction provides longer life
Art. no.
Power Input
Power Output
Rotation Speed
Orbits per Minute
Orbit Size
Paper Size
Weight
Length
Standard Equipment:
Sanding sheet, Fabric dust bag with built-in extractor ports
D26453-QS
280 Watts
120 Watts
7000 - 12000 rpm
14000 - 24000 opm
2.4 mm
125 mm
1.6 kg
130 mm
1445
Power tools DeWalt
Compact belt sander DEWALT D26480 500 W
• Ergonomic palm grip design with soft grip maximises user comfort and control in all applications
• Lightweight configuration increases ease of use
• Powerful 500 Watt motor for rapid, progressive material removal
• Flush sided design allows sanding right up to an edge or vertical surface
• Detachable dust port with nozzles suitable for 22-35 mm extractors allows dust removal with a range of extraction units
• Detachable secondary handle for control in extended applications
Art. no.
Power Input
Power Output
Belt Speed
Belt Size
Sanding Size
Weight
Length
Height
Standard Equipment:
Belt pack, Dust extraction port, Secondary handle
D26480-QS
500 Watts
350 Watts
365 m/min
64 x 356 mm
64 x 80 mm
2.4 kg
200 mm
120 mm
Saws
Circular saws
Depth of cut saw DEWALT D23550 1050 W
•
•
•
•
•
•
Compact, well balanced and easy to use circular saw with 55 mm cutting depth
Quick and easy depth and angle adjustment
High torque motor for durability and power for cutting job site and joinery materials
Aluminium shoe for accuracy and durability
Efficient dust extraction ports to minimise airborne dust particles when connected to an extractor unit
Gears and drive spindle mounted in durable cast aluminium housing
Art. no.
Power Input
Power Output
No Load Speed
Blade Diameter
Blade Bore
Bevel Capacity
Max. Depth of Cut at 90º
Max. Depth of Cut at 90º [with guide rails]
Weight
Standard Equipment:
Precision 12 tooth saw blade, Rip fence, Blade spanner
D23550-QS
1050 Watts
570 Watts
5000 rpm
165 mm
20 mm
45º
55 mm
51 mm
6.0 kg
Reciprocating saws
Reciprocating saw DEWALT DW304PK 1050 W
•
•
•
•
•
1050 Watt motor designed for heavy duty applications
4 position blade clamp allows for flush cutting and increased versatility
With a 29 mm stroke length, the DW304PK delivers excellent cutting performance
Lever-action keyless blade clamp for quick and easy blade changing
Ideal for plumbers, electricians, heating, HVAC, and builders
Art. no.
Power Input
Power Output
No Load Stroke Rate
Stroke Length
Max. Cutting Capacity [Wood]
Max. Cutting Capacity [Steel Sections & Pipes]
Max. Cutting Capacity [PVC]
Weight
Standard Equipment:
1 professional bi-metal blade, Heavy duty carrying case
1446
DW304PK-QS
1050 Watts
525 Watts
0 - 2800 spm
29 mm
280 mm
100 mm
130 mm
3.5 kg
•
•
•
•
•
•
1200 Watt motor delivers increased power for heavy duty applications
Orbital action delivers fast cutting in wood applications
0-2,600 SPM and 28 mm stroke length for fast and efficient cutting
Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability
Keyless adjustable shoe easily adjusts depth of cut and extends the blade life
Variable speed control dial matches the correct speed for the application for increased versatility and control
Art. no.
Power Input
Power Output
No Load Stroke Rate
Stroke Length
Max. Cutting Capacity [Steel Sections & Pipes]
Max. Cutting Capacity [PVC]
Weight
Standard Equipment:
1 professional bi-metal blade, Heavy duty carrying case
DW311K-QS
1200 Watts
630 Watts
0 - 2600 spm
28 mm
300 mm
130 mm
160 mm
4.0 kg
Power tools DeWalt
Reciprocating saw DEWALT DW311K 1200 W
Jigsaws
Body grip jigsaw DEWALT DW333K 701 W
• Powerful 701 Watt motor with variable speed delivers fast cutting action up to 3100 strokes per minute
• Quick and easy patented keyless blade system accepts T - shank blades
• Patented anti-vibration counter-balance mechanism and rubber grip provide smooth operation
• 4-position pendulum action controls the aggressiveness or smoothness of cuts
• Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
• Full wave electronic speed control with feedback ensures that blade speed is maintained under any load for a
consistent finish across all materials
Art. no.
DW333K-QS
Power Input
701 Watts
Power Output
445 Watts
No Load Stroke Rate
800 - 3100 spm
Stroke Length
26 mm
Bevel Capacity
45º
135 mm
Max. Cutting Capacity [Steel]
12 mm
Max. Cutting Capacity [Non Ferrous Metal]
30 mm
Weight
2.6 kg
Standard Equipment:
4 high performance jigsaw blades, Anti-scratch cover, Anti-splinter insert, Dust extraction adapter, Heavy duty
carrying case
Mitre saws
Combination saw DEWALT D27107 2000 W
• The next generation of TGS combination saw combines the accuracy of modern mitre saws with the power and
capacity of dedicated table saws
• Electronic pack provides massive overload protection and constant cutting speed for optimal cutting performance
• Integral leg design increasing durability and ease of use
• 305 mm head provides an massive 155 mm depth of cut
• New mitre and bevel adjustment systems ensure high accuracy and simple adjustment
• Additional wheels and wheel barrow mode result in the saw being extremely easy to transport around the jobsite
Art. no.
D27107-XC
Power Input
2000 Watts
Power Output
1400 Watts
Blade Speed
4000 rpm
Blade Diameter
305 mm
Blade Bore
30 mm
Bevel Capacity
48º
Mitre Capacity [right/left]
48/48º
Cutting Capacity at 90º/90º (W x H)
50 x 155 mm
Standard Equipment:
48 tooth saw blade, Parallel fence, Riving knife, Push stick, Mitre dust collector, Table saw guard
1447
Power tools DeWalt
Mitre saw DEWALT D27112 1600 W
•
•
•
•
•
•
Lightweight, powerful 1600 Watt universal motor for demanding applications
23 kg unit weight for maximum portabilty
285 mm crosscut capacity gives huge versatility
Combination saw with crosscut and ripping capabilities
Innovative guard design maximises safety in use
Slide mechanism incorporated to increase cross cut capacity
Art. no.
Power Input
Power Output
Blade Speed
Blade Diameter
Blade Bore
Bevel Capacity
Standard Equipment:
Saw blade, Push stick, Blade wrench, Rip fence, Table saw blade guard
D27112-QS
1600 Watts
1370 Watts
3650 rpm
305 mm
30 mm
45º
50/60º
285 x 90 mm
Mitre saw DEWALT DW712 1600 W
• New mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60°
right and 0 and 50° left
• The innovative grooving stop allows adjustment of the cutting depth for grooving and rebating applications
• The large dual sliding fence mechanism gives maximum support in large material cuts at any angle or combination
of angles
• Horizontal rails create additional capacity for larger materials
• The aluminium base construction provides stability to the saw while still retaining its portability
• 60° right mitre angle provides enough capacity for the most difficult applications
Art. no.
Power Input
Power Output
Blade Speed
Blade Diameter
Blade Bore
Bevel Capacity
Standard Equipment:
24 tooth saw blade, On-board blade spanner
DW712-QS
1600 Watts
930 Watts
3700 - 4600 rpm
216 mm
30 mm
48/-2º
60/50º
300 x 70 mm
• Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly adjust angles
between 0° - 60° left and 0° - 50° right
• The innovative grooving stop allows the adjustment of the cutting depth for grooving and rebating applications
• The large dual sliding fence gives maximum support in large material cuts at any angle or combination of angles
• Linear horizontal rails utilise bronze guides to provide maximum precision when cutting materials up to 345 mm
wide
• New quick release bevel setting provides accurate and simple setting of bevel angles up to 48° left and right
• Compact and lightweight design characteristics deliver a saw with enormous capacity which is easy to transport
around the jobsite
Art. no.
Power Input
Power Output
Blade Speed
Blade Diameter
Blade Bore
Bevel Capacity
Weight
Standard Equipment:
60 tooth blade, Blade spanner, Dust bag
1448
DW718-QS
1600 Watts
960 Watts
1900 - 3400 rpm
305 mm
30 mm
48/48º
50/60º
327 x 90 mm
24.8 kg
• The classic pull saw design improved and updated for the modern user
• New 1800 Watt motor for powerful cutting in all materials
• Dust extraction specifically designed to meet the needs of the professional user in heavy use applications, protection from airborn dust particles minimises health risk over long periods
• The base and fence have been machined to meet the accuracy requirements of the most demanding applications
• New head lock function allows the head to be fixed, restricting the traverse function for trim applications and
ease of transportation
• Integrated positive mitre stops at 15°, 22.5°, 30°, 45°, quick release mitre mechanism up to 50°
Art. no.
Power Input
Power Output
Blade Speed
Blade Diameter
Blade Bore
Bevel Capacity
Standard Equipment:
24 tooth saw blade, 2 bench mounting bolts, Blade spanner
DW777-QS
1800 Watts
1100 Watts
6300 rpm
216 mm
30 mm
48º
50/50º
265 x 62 mm
Power tools DeWalt
Mitre saw workstation DEWALT DE7023
•
•
•
•
•
•
Accommodates all DEWALT mitre saws
Lightweight aluminium construction provides portability in and around the jobsite
1.7 metre beam extends to support up to 3.9 metres for use with large workpieces
The beam can support up to 182 kg providing maximum flexibility and capacity
Work stops can be converted into end stops for repetitive cutting to length
Integral folding legs avoids unnecessary assembly
Art. no.
Fits
Description
Standard Equipment:
2 x work stops/support, Mitre sax brackets
DE7023-XJ
All DEWALT mitre saws
Heavy duty mitre saw workstation
Metal cutting saws
Metal cutting chopsaw DEWALT DW872 2200 W
•
•
•
•
•
•
High power 2200 Watt motor with electronic soft start for metal cutting
25.4 mm arbor fitment takes a variety of metal saw blades
Large tool-free pivoting fence for parallel and mitre cuts up to 45°
Robust cool-running 355 mm, 70 tooth tungsten carbide tipped blade
Burr-free cuts at constant cutting depth throughout the life of the blade
Quick-retracting guard for increased visibility
Art. no.
Power Input
Power Output
No Load Speed
Wheel Diameter
Max. Cutting Capacity at 90º [Square Profile]
Max. Cutting Capacity at 90º [Rectangular Profile]
Max. Cutting Capacity at 90º [L-Shape Profile]
Max. Cutting Capacity at 90º [Rounded Profile]
Standard Equipment:
355 mm metal carbide blade, Hex key, Auxiliary clamp
DW872-QS
2200 Watts
1350 Watts
1300 spm
355 mm
100 x 100 mm
75 x 130 mm
92 x 92 mm
130 mm
1449
Power tools DeWalt
Planers
1450
Planer DEWALT DW680 600 W
•
•
•
•
•
•
Low weight and perfect balance make this planer ideal for single handed use in awkward applications
Front handle depth control in clearly marked 0.1 mm steps for accurate setting with a positive stop position
A large planer blade drum rotating at high speed provides an excellent finish
High power motor for smooth results, even in hard woods
Rubber coated front handle eliminates slipping for greater comfort and control
3 different size chamfering grooves in the front shoe simplify precision fitting jobs
Art. no.
DW680-QS
Power Input
600 Watts
Power Output
350 Watts
No Load Speed
15000 spm
Maximum Depth of Cut
2.5 mm
Rebating Depth
12 mm
Planer Width
82 mm
Shoe Length
290 mm
Drum Diameter
54 mm
Weight
3.2 kg
Standard Equipment:
Tungsten carbide tipped reversible blades, Parallel fence, Dust extraction adapter

Chapter 17 Power tools Makita and DeWalt

Transcription

Similar documents

DeWALT - PowerTools and Accessories Catalogue

WA841 WA842 WA966 Tokyo Drift Nissan 350Z

bosch - Amcell - The Power Tool Battery Specialists

onsite offers