our complete - Think Green Solutions

Transcription

Industrial and Commercial
INDUCTION LIGHTING
THINK HIGH/LOW BAY INDUCTION LIGHTS
THINK STREET INDUCTION LIGHTS
THINK TUNNEL INDUCTION LIGHTS
THINK GARAGE INDUCTION LIGHTS
THINK FREEZER INDUCTION LIGHTS
THINK FLOOD INDUCTION LIGHTS
THINK WALLPACK INDUCTION LIGHTS
180 ave du Voyageur, Pointe-Claire, QC, H9R 6A8
Tel: 800.561.2876
Fax: 514.428.9572
[email protected]
www.reonac.com
INDUCTION LIGHTING
Technology Breakdown
Induction Lamps
The basic technology for induction lamps is not particularly
new. Essentially, an induction lamp is an electrodeless
fluorescent. Without electrodes, the lamp relies on the
fundamental principles of electromagnetic induction and
gas discharge to create light. The elimination of filaments
and electrodes results in a lamp of unmatched life. Lasting
100,000 hours, this system can outlast 100 incandescent,
five HID, or five typical fluorescent lamp changes.
Based on these well-known principles, light can be
generated via a gas discharge through simple magnetism.
Electromagnetic transformers, which consist of rings with
metal coils, create an electromagnetic field around a glass
tube which contains the gas, using a high frequency that is
generated by an electronic ballast.
The discharge path, induced by the coils, forms a closed
loop causing acceleration of free electrons, which collide
with mercury atoms and excite the electrons. As the excited
electrons from these atoms fall back from this higher
energy state to a lower stable level, they emit ultraviolet
radiation. The UV radiation created is converted to visible
light as it passes through a phosphor coating on the surface
of the tube. The unusual shape of an induction lamp
maximizes the efficiency of the fields that are generated.
Although it is not breakthrough science, until recently, it has
not been so commercially viable. New developments have
broken down the barriers of costs and technological
setbacks, such as EMC interference, lumen depreciation,
ability to dim and a useful range of available wattages.
Today, its obvious benefits make it the clear-cut choice for
many lighting applications over traditional light sources.
Whatever aspect of lighting that you prioritize, THINK
induction lamps are superior in many categories. Energy
efficiency, life, color rendition, lumen depreciation,
waste/heat output, glare... the list goes on. THINK lamps
are truly the next generation of electric light that is set to
displace several existing forms of electric lighting.
Reonac Energy Systems
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Electrodeless
Induction Lamps
SB Series 40W - 400W
Induction Lamp Specifications
Model No.
Wattage
(W)
AMP-SB40
AMP-SB70
AMP-SB80
AMP-SB100
AMP-SB120
AMP-SB150
AMP-SB200
AMP-SB250
AMP-SB300
AMP-SB400
40
70
80
100
120
150
200
250
300
400
Operating
Frequency
(KHz)
250
Rated Initial
Luminance
(Lm)
2600-2800
4900-5250
5600-6000
7500-8000
9000-9600
11250-12000
16000-17000
21250-22500
25500-27000
34000-36000
Efficacy
(Lm/W)
65-70
70-75
70-75
75-80
75-80
75-80
80-85
85-90
85-90
85-90
Luminance
Maintenance
(60Khrs)
CRI
Average Lifetime
THD
85%
>= 85
100 000 hrs
<10%
Induction Lamp Dimensions
Wattage
Dim
70W
80W
100W
120W
150W
200W
Bracket Length
L1
9,45 (240)
9,45 (240) 10,63 (270) 11,93 (303)
14,09 (358)
16,50 (419)
Mounting Holes Spacing L2
8,86 (225)
8,86 (225) 10,04 (255) 11,34 (288)
13,50 (343)
15,91 (404)
Couple Wiring Spacing L3 7,85 (199.5) 7,85 (199.5) 9,42 (239.2) 10,72 (272.2) 12,53 (318.3) 14,93 (379.1)
Tube Diameter
D1
2,13 (54)
2,13 (54)
2,13 (54)
2,13 (54)
2,13 (54)
2,13 (54)
Lamp Height
H
3,09 (78.5) 3,09 (78.5) 3,09 (78.5)
3,09 (78.5)
3,09 (78.5)
3,09 (78.5)
Bracket Width
W
1,18 (30)
1,18 (30)
1,18 (30)
1,18 (30)
1,18 (30)
1,18 (30)
Lamp Width
D2 7,09 (180)
7,09 (180)
8,54 (217)
9,80 (249)
11,57 (294)
13,94 (354)
Mounting Hole Radius
R
0,10 (2.5)
0,10 (2.5)
0,10 (2.5)
0,10 (2.5)
0,10 (2.5)
0,10 (2.5)
www.reonac.com
250W
17,17 (436)
16,38 (416)
15,83 (402)
2,28 (58)
3,09 (78.5)
1,18 (30)
14,84 (377)
0,10 (2.5)
800.561.2876
300W
19,69 (500)
18,90 (480)
18,35 (466)
2,28 (58)
3,09 (78.5)
1,57 (40)
17,36 (441)
0,10 (2.5)
INDUCTION LIGHTING
Electrodeless
Induction Lamps
DB Series 40W - 400W
Induction Lamp Specifications
Model No.
Wattage
(W)
AMP-DB40
AMP-DB70
AMP-DB80
AMP-DB100
AMP-DB120
AMP-DB150
AMP-DB200
AMP-DB250
AMP-DB300
AMP-DB400
40
70
80
100
120
150
200
250
300
400
Operating
Frequency
(KHz)
250
Rated Initial Efficacy Luminance
Luminance (Lm/W) Maintenance
(Lm)
(60Khrs)
2600-2800
65-70
4900-5250
70-75
5600-6000
70-75
7500-8000
75-80
9000-9600
75-80
85%
11250-12000 75-80
16000-17000 80-85
21250-22500 85-90
25500-27000 85-90
34000-36000 85-90
CRI
Average
Lifetime
THD
>= 85
100 000 hrs
<10%
1.58(40)
L3
1.73(44) M4
W
L1
L1
L2
L2
70W~200W
40W~200W
3.07(78)
5.61(142.5)
40W,55W
W1
W2
3.01(76.5)
W2
W1
L1
L2
S
H
R0.10(2.5)
W2
W1
0.197(Φ5)
H
R
H1
0.84(21.5)
M4
L
4.49(114)
1.65(Φ42)
1.52 (38.5)
2.79(70.8)
8.03(204)
200W~400W
70W~400W
Induction Lamp Dimensions
Wattage
Dim
Bracket Length
L1
Mounting Holes Spacing L2
Couple Wiring Spacing L3
Tube Diameter
D
Lamp Height
H
Bracket Width
W1
Lamp Width
W2
Mounting Hole Radius
R
40W
38 diam
9,45 (240)
9,06 (230)
8,66 (220)
1,50 (38)
3,09 (78.5)
0,79 (20)
4,33 (110)
0,10 (2.5)
70W 80W 100W
54 diam
12,91 (328)
12,13 (308)
11,57 (294)
2,13 (54)
3,09 (78.5)
1,18 (30)
7,56 (140)
0,10 (2.5)
120W
54 diam
14,49 (368)
13,70 (348)
13,15 (334)
2,13 (54)
3,09 (78.5)
1,18 (30)
7,56 (140)
0,10 (2.5)
150W
54 diiam
16,46 (418)
15,67 (398)
15,12 (384)
2,13 (54)
3,09 (78.5)
1,18 (30)
7,56 (140)
0,10 (2.5)
200W
54 diam
58 diam
22,76 (578)
24,37 (469)
21,97 (558)
23,58 (449)
21,42 (544)
23,03 (435)
2,13 (54)
2,28 (58)
3,09 (78.5)
3,09 (78.5)
1,18 (30)
1,77 (45)
7,56 (140)
7,56 (192)
0,10 (2.5)
0,10 (2.5)
250W
38 diam
58 diam
42,44 (1078) 24,37 (619)
41,65 (1058) 23,58 (599)
41.10 (1044) 23,03 (585)
1,50 (38)
2,28 (58)
3,09 (78.5) 3,09 (78.5)
1,18 (30)
1,77 (45)
4,92 (125)
7,56 (192)
0,10 (2.5)
0,10 (2.5)
www.reonac.com
300W
400W
54 diam
58 diam
54 diam
58 diam
32,60 (828) 28,31 (719) 42,44 (1078) 36.54 (928)
31,81 (808) 27,52 (699) 41,65 (1058) 35.75 (908)
31,26 (794) 26,97 (685) 41,10 (1044) 35.20 (894)
2,13 (54)
2,28 (58)
2,13 (54)
2,28 (58)
3,09 (78.5) 3,09 (78.5)
3,09 (78.5)
3,09 (78.5)
1,18 (38)
1,77 (45)
1,18 (38)
1,18 (38)
6,22 (158) 7,56 (192)
6,22 (158)
7,56 (192)
0,10 (2.5) 0,10 (2.5)
0,10 (2.5)
0,10 (2.5)
800.561.2876
INDUCTION LIGHTING
Electronic Ballast
Specifications
SB Series, DB Series, GL Series
SB Series
Product No.
Profile aluminum
10601040H01
10601055H01
10601070H01
10601080H01
10601100H01
10601120H01
10601150H01
10601200H01
Disc type
10601040H41
10601055H41
10601070H41
10601080H41
10601100H41
10601120H41
10601150H41
10601200H41
10601250H41
10601300H41
10601400H41
Model No.
Profile aluminum
REO40DH01-U
REO55DH01-U
REO70DH01-U
REO80DH01-U
REO100DH01
REO120DH01-U
REO150DH01-U
REO200DH01-U
Disc type
REO40DH01-U-D
REO55DH01-U-D
REO70DH01-U-D
REO80DH01-U-D
REO100DH01-U-D
REO120DH01-U-D
REO150DH01-U-D
REO200DH01-U-D
REO250DH01-U-D
REO300DH01-U-D
REO400DH01-U-D
Wattage
(W)
Frequency
(Hz)
THD
Power
Factor
50/60
<= 10%
> 0.95
Current
(A)
Frequency
(Hz)
THD
Power
Factor
0.35-0.16
0.49-0.21
0.62-0.27
0.70-0.32
0.93-0.40
1.05-0.46
1.36-0.59
1.79-0.77
2.19-1.05
2.63-1.20
3.50-1.52
50/60
<= 10%
> 0.95
Voltage
(VAC)
Current
(A)
Frequency
(Hz)
THD
Power
Factor
120-277
0.31-0.14
0.49-0.21
0.73-0.31
0.88-0.41
1.11-0.48
1.46-0.67
1.76-0.80
2.19-0.95
50/60
<= 10%
> 0.95
Voltage
(VAC)
Current
(A)
40
55
70
80
100
120
150
200
250
300
400
120-277
208-347
0.35-0.16
0.49-0.21
0.62-0.27
0.70-0.32
0.93-0.40
1.05-0.46
1.36-0.59
1.79-0.77
2.19-1.05
2.63-1.20
3.50-1.52
Wattage
(W)
Voltage
(VAC)
Input
Power
(W)
42
58
74
84
105
126
158
210
263
315
386
Case
Temperature
(°C)
Input
Power
(W)
42
58
74
84
105
126
158
210
263
315
420
Case
Temperature
(°C)
Input
Power
(W)
37
58
89
105
126
173
210
263
Case
Temperature
(°C)
< 65
DB Series
Product No.
Model No.
Profile aluminum Die cast aluminum Profile aluminum Die cast aluminum
10601040H01
REO40DH01-U
10601055H01
REO55DH01-U
10601070H01
10601070H71
REO70DH01-U-TL
REO70DH01-U
10601080H01
10601080H71
REO80DH01-U
REO80DH01-U-TL
10601100H01
10601100H71
REO100DH01-U-TL
REO100DH01
10601120H01
10601120H71
REO120DH01-U REO120DH01-U-TL
10601150H01
10601150H71
REO150DH01-U REO150DH01-U-TL
10601200H01
10601200H71
REO200DH01-U REO200DH01-U-TL-L
10601250H71
REO250DH01-U-TL
10601300H71
REO300DH01-U-TL
10601400H71
REO400DH01-U-TL
40
55
70
80
100
120
150
200
250
300
400
120-277
208-347
< 65
GL Series
Product No.
Profile aluminum
10601035G01
10601055G01
10601085G01
10601100G01
10601120G01
10601165G01
10601200G01
10601250G01
Disc type
10601035G41
10601055G41
10601085G41
10601100G41
10601120G41
10601165G41
10601200G41
10601250G41
Model No.
Profile aluminum
REO-35WLF-U
REO-55WLF-U
REO-85WLF-U
REO-100WLF-U
REO-120WLF-U
REO-165WLF-U
REO-200WLF-U
Disc type
REO-35WLF-U-D
REO-55WLF-U-D
REO-85WLF-U-D
REO-100WLF-U-D
REO-120WLF-U-D
REO-165WLF-U-D
REO-200WLF-U-D
REO-250WLF-U-D
Wattage
(W)
35
55
85
100
120
165
200
250
www.reonac.com
800.561.2876
< 65
INDUCTION LIGHTING
High/Low Bay Light
THK-HBDC/150, THK-HBDC/200, THK-HBDC/250
Product Features
Die cast aluminum ballast casing with powder coated finish for corrosion-resistance.
High purity aluminum reflector with vacuum coated inner surface
THK-HBDC/150, THK-HBDC/200 acrylic / flat tempered glass / polycarbonate lens.
THK-HBDC/250 acrylic lens.
Lamp and Ballast
THINK 120W - 250W round tubular induction lamp features high lighting efficacy,
long lifetime, good color rendering, stable output, etc.
THINK electronic ballast features high power (>0.95), flickering free, low cost,
constant output, etc.
Photometric
Applications
Stadiums, workshops, warehouses, airports,
railway stations, gas stations, amusement
parks, exhibition halls, supermarkets, etc.
Dimensions
Φ9.6(244)
Φ0.55(14)
Φ0.55(14)
22.44(570)
Φ0.55(14)
Φ0.55(14)
~25.79(655)
22.44(570)
22.44(570)
Φ11.02(280)
Φ11.02(280)
~26.18(665)
Φ9.6(244)
25.39(645)
Φ0.55(14)
25.67(652)
Φ9.6(244)
22.44(570)
22.44(570)
22.44(570)
120W
200W
250W
Fixture Specifications
Fixture Model
No.
Wattage
(W)
120
150
Input power
THK-HBDC/200
200
THK-HBDC/250
250
THK-HBDC/150
Lumens
VEL*
10,080
12,490
22,680
28,102
210
16,800
37,800
262
21,000
47,250
(W)
126
156
Voltage (V)
Color Temperature
Ambient
(K)
Temperature (°C)
Installation
IP Class
120-277
120-277
208-347
2720 - 6500
-20°C ~+40°C**
Hook - Hanging Pole
IP43
(Control gear)
* Visual Effective Lumens (2.25 S/P ratio for 6500K lamp)
**-40C rated available if specified on order
***Only the models available on 208-347V are CSA certified.
www.reonac.com
800.561.2876
INDUCTION LIGHTING
High/Low Bay Light
THK-HBP/100, THK-HBP/150, THK-HBP/200, THK-HBP/250
Product Features
High temperature-resistant polycarbonate hood
THK-HBP/150, THK-HBP/200, THK-HBP/250 equipped with inner reflectors
Lamp and Ballast
Applications
Photometric
Retail, Airports, Shopping Centres,
Warehouses, Railway Stations.
Dimensions
D1
Φ0.55(14)
H
D
Model No.
D
D1
H
Note
40
Ø12.60(320)
Ø6.54(166)
17.32(440)
12”PC
70
Ø14.25(362)
Ø8.07(205)
20.08(510)
14”PC
100
Ø16.14(410) Ø8.071(205)
23.62(600)
16”PC
150
Ø22.44(570)
Ø9.6(244)
27.24(692)
22”PC
200
Ø22.44(570)
Ø9.6(244)
27.24(692)
22”PC
250
Ø22.44(570)
Ø11.02(280)
27.72(704)
22”PC
80W
200W
250W
Fixture Model
No.
THK-HBP/100
THK-HBP/150
Wattage Input power
Lumens
(W)
(W)
5,715
76
70
6,720
84
80
8,480
106
100
9,769
122
120
12,640
158
150
VEL*
Voltage (V)
12,858
15,120
19,080
21,980
28,440
120-277
THK-HBP/200
200
210
16,800
37,800
THK-HBP/250
250
260
20,838
45,885
Color Temperature
Ambient
(K)
Temperature (°C)
2720 - 6500
-20°C ~+40°C**
Installation
Hook - Hanging Pole
IP Class
IP43
(Control gear)
120-277
208-347
www.reonac.com
800.561.2876
INDUCTION LIGHTING
High/Low Bay Light
THK-HBDC-5/250, THK-HBDC-5/300, THK-HBDC-5/400
Product Features
High purity aluminum reflector
Acrylic lens
Lamp and Ballast
Applications
Photometric
Dimensions
~25.39(645)
Φ0.55(14)
250W
300W
400W
Φ30.51(77 5)
Fixture Model Wattage Input power
(W)
No.
(W)
THK-HBDC-5/250
250
262
THK-HBDC-5/300
300
314
THK-HBDC-5/400
400
386
Lumens
VEL*
Voltage (V)
21,000
26,654
30,878
47,250
59,972
69,476
120-277
208-347
Color Temperature
Ambient
(K)
Temperature (°C)
2720 - 6500
-20°C ~+40°C**
Installation
Hook - Hanging Pole
IP Class
IP43
(Control gear)
***Only the models available on 208-347V are CSA certified
www.reonac.com
800.561.2876
INDUCTION LIGHTING
High/Low Bay Light
THK-HBDC-6
Product Features
Die cast aluminum ballast casing with powder coated finish for corrosion-resistance. IP65 for both gear and lamp.
Water and dirt proof swivel clip designed to quickly disconnect for easy installation and maintenance.
Split wiring box for wiring assembly without opening the gear box.
Optional hook and pipe installation
Safety chain to improve safety of the product.
Integration of electronic ballasts and lighting design, direct distribution of heat, high reliability.
Integrated design of ballast and fixture for extended gear lifetime.
Strong flat glass or polycarbonate lens with good optical performance, stainless steel fasteners and clip.
High heat resistant sealing ring.
High pure anodized aluminum reflector with good optical performance, high fixture efficiency, optional photometrics
with wide beam, medium beam and narrow beam.
Lamp and Ballast
Dimensions
Fixture Model Wattage Input
No.
(W)
(W)
106
THK-HBDC-6/100
100
126
THK-HBDC-6/120
120
154
THK-HBDC-6/150
150
201
THK-HBDC-6/200
200
Lumens
VEL*
Voltage (V)
IP Class
19,202
22,680
27,812
36,074
Ambient
Temperature (°C)
Installation
8,534
10,080
12,361
16,033
Color Temperature
(K)
120-277
208-347
2720 - 6500
-20°C ~+40°C**
Hook - Hanging Pole
IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Low Bay Light
THK-LBDC-2/100, THK-LBDC-2/150, THK-LBDC-2/200
Product Features
High purity aluminum reflector with vacuum coated inner surface.
Acrylic lens
Lamp and Ballast
Applications
Photometric
Dimensions
70W
100W
200W
Fixture Model
No.
Wattage Input power
Lumens
(W)
(W)
70
74
5,512
THK-LBDC-2/100
80
84
6,300
100
106
8,534
120
126
10,080
THK-LBDC-2/150
150
154
12,361
VEL*
Voltage (V)
12,402
14,175
19,202
22,680
27,812
120-277
THK-LBDC-2/200
36,074
200
201
16,033
120-277
208-347
Color Temperature
Ambient
(K)
Temperature (°C)
2720 - 6500
Installation
-20°C ~+40°C** Hook - Hanging Pole
IP Class
IP43
(Control gear)
www.reonac.com
800.561.2876
INDUCTION LIGHTING
High/Low Bay Light
THK-RHB1
Product Features
Aluminum housing with powder coated finish for corrosion-resistance.
Reflector made of high quality aluminum plate
Open structure for good ventilation and prolonged lifetime
Mounting by hanging pole or “L” shape bracket
Lamp and Ballast
THINK 400W square tubular induction lamp features high lighting efficacy,
Applications
Dimensions
Photometric
14.09(358)
6.57(167)
Warehouses, supermarkets, retail
showrooms, exhibition halls, factories, etc.
RHB1-400 47.40(1204)
RHB2-400 41.50(1054)
400W
Fixture Model
No.
Wattage
(W)
Input power
Lumens
VEL*
Voltage (V)
Color Temperature
(K)
Ambient
Temperature (°C)
Installation
IP Class
THK-RHB1/200
THK-RHB1/250
THK-RHB1/300
THK-RHB1/400
200
250
300
400
210
263
315
396
15,600
21,000
26,775
33,600
35,100
47,250
60,244
75,600
120-277
347
2720 - 6500
-20°C ~+40°C
"L" Bracket
“U” Bracket
IP20**
(W)
** Also available in IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Street Light
THK-SL2
Product Features
High pressure die cast aluminum lamp frame and strong stretched aluminum
alloy top casting with powder coating for corrosion resistance and durable use.
High purity aluminum reflector with vacuum coated inner surface.
Clear tempered glass lens or polycarbonate lens available.
Heat resistant silicone rubber sealing ring to ensure high level of IP rating.
Optional photocell to maximize energy savings.
Timer dimming function available upon request
Lamp and Ballast
THINK 100W-250W square tubular induction lamp features high lighting efficacy,
Applications
Freeways, highways, parking lots, public entrances, off-street areas, etc.
Dimensions
W
L
H
Photometric
Model No.
L
W
H
150
31.54(801)
14.49(368)
7.68(195)
16.50(419)
8.35(212)
250
41.50(1054)
150a
31.54(801)
14.49(368) 10.59(269)
250a
41.50(1054)
16.50(419) 12.59(307)
100W
120W
150W
200W
Fixture Model
No.
THK-SL2/150
THK-SL2/250
Wattage
(W)
70
80
100
120
150
200
250
Input power
(W)
74
82
96
126
156
210
250
Lumens
VEL*
5,600
6,720
7,694
10,080
12,000
16,834
19,875
12,600
15,120
17,312
22,680
27,000
37,877
44,719
Voltage (V)
Color Temperature
(K)
Ambient
Temperature (°C)
Installation
IP Class
2720 - 6500
-20°C ~+40°C
Round pole
IP65
120-277
120-277 208-347
120-277
120-277
208-347
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Street Light
THK-SL3
Product Features
Compact structure, good heat dissipation, long lifetime and easy maintenance.
Newest type with die cast aluminum streamline contoir for high wind resistance, adjustable
projecting angle.
Die cast aluminum housing with powder coated finish for corrosion resistance and durable use.
High purity stretched aluminum reflector with vacuum coating for even light districution, soft
light and good light utilization.
Reflector is fixed with the top cover for tight seal and excellent construction.
Special construction for the separated ballast and lamp compartment.
SL3 with tempered glass lens.
High heat resistant silicone rubber bushing for high IP rating.
Optional photo control for energy saving.
100W - 150W fixture with tilt adjusted.
Lamp and Ballast
THINK 40W-250W tubular type induction lamp features high lighting efficacy,
Dimensions
Wattages
L
W
H1
H2
40W - 80W
23.18 (588.7)
14.35 (364.6)
9.64 (244.9)
10.44 (265.3)
100W - 150W
27.10 (688.4)
15.18 (385.6)
10.98 (278.9)
12.02 (305.3)
200W - 250W
35.93 (912.6)
17.17 (436)
10.86 (275.9)
12.18 (309.3)
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Street Light
THK-SL3
Photometric
70W
150W
200W
250W
Fixture Model
No.
THK-SL3
Wattage
Lumens
(W)
40
70
80
100
120
150
200
250
2,800
5,250
6,000
7,694
10,080
12,000
16,834
19,875
VEL*
6,300
11,813
13,500
17,312
22,680
27,000
37,877
44,719
Color
Ambient
Voltage (V) Temperatur Temperature
e (K)
(°C)
120-277
2720 - 6500 -20°C ~+40°C
Installation
IP Class
Round Lamp Pole
O 1.97 (50) - 2.63 (60)
IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Tunnel Light
THK-TL1/100, THK-TL1/150, THK-TL1/200
Product Features
Square profiled aluminum housing concealed with two extruded
welding side covers for high IP rating
Anodized aluminum reflector and clear tempered glass lens are
designed to optomize light distribution
Gas-tight silicon rubber seal made for wet locations
Front opening structure, easy for maintenance
Lamp and Ballast
Applications
Photometric
Tunnels, freeways, highways, parking lots,
public entrances, off-street areas, etc.
Dimensions
11.61~12.40(295~315)
A
~14.57(370)
4-Φ0.51(13)
~14.57(370)
Dimension:
Model No.
A
R0.26(6.5) Φ0.63(16) R0.26(6.5)
B
100
18.50(470) 14.96(380)
150
21.65(550) 15.75(400)
200
27.95(710) 19.69(500)
1.18(30)
1.18(30)
4.33(110)
6.69(170)
B
6.69(170)
A
Dimension:
6.50(165)
6.50(165)
~12.05(306)
B
7.09(180)
Model No.
A
B
100
18.50(470) 12.60(320)
150
21.65(550) 12.60(320)
200
27.95(710) 16.54(420)
Dimension B is adjustable
70W
120W
200W
Fixture Model
No.
THK-TL1/100
THK-TL1/150
THK-TL1/200
Wattage
(W)
70
80
100
120
150
Input power
200
210
(W)
74
84
100
126
158
Lumens
VEL*
5,880
6,400
8,000
10,080
11,872
13,230
14,400
18,000
22,680
26,712
15,600
35,100
Voltage (V)
Color Temperature
(K)
120-277
347
2720 - 6500
Ambient
Temperature (°C)
-20°C ~+40°C**
Installation
IP Class
"U" bracket,
horizontal +- 30°,
"L" bracket,
horizontal +- 30°
IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Tunnel Light
THK-TL2/250, THK-TL2/300, THK-TL2/400
Product Features
Square profiled aluminum housing concealed with two extruded
welding side covers for high IP rating
Anodized aluminum reflector and clear tempered glass lens are
designed to optomize light distribution
Front opening structure, easy for maintenance
Lamp and Ballast
Applications
Photometric
Tunnels, freeways, highways, parking lots, public
entrances, off-street areas, stadiums, workshops,
airports, gas stations, supermarkets, etc.
~12.05(306)
6.50(165)
Dimensions
A
~14.57(370)
4-Φ0.51(13)
6.69(170)
B
6.69(170)
Dimension:
Model No.
250
300
400
Dimension B is adjustable
A
B
32.87(835)
19.69(500)
37.80(960)
23.62(600)
48.03(1220)
27.56(700)
250W
300W
400W
With L shape bracket
Fixture Model
No.
THK-TL2/250
THK-TL2/300
THK-TL2/400
Wattage
(W)
250
300
400
Input Power
(W)
263
315
420
Lumens
VEL*
21,000
26,775
33,600
47,250
60,244
75,600
Voltage (V)
120-277
347
Color Temperature
(K)
2720 - 6500
Ambient
Temperature (°C)
-20°C ~+40°C**
Installation
IP Class
"L" bracket,
horizontal +- 30°,
Hanging pole
IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Garage Light
THK-GL/40, THK-GL/70, THK-GL/80, THK-GL/100
Product Features
Die cast aluminum housing with powder coated finish for corrosion-resistance
UV stabilized polycarbonate lens
Separated control gear used to improve heat dispersion and extend lifetime
of lighting fixture
Lamp and Ballast
THINK 40W-100W round tubular induction lamp features high lighting
efficacy, long lifetime, good color rendering, stable output, etc.
Applications
Parking garages, gas stations, warehouses, etc.
Dimensions
Photometric
12.44(316)
7.48(190)
~11.61(295)
9.37(238)
12.44(316)
9.37(238)
~11.61(295)
7.48(190)
Dia suggested for
the hole: Φ0.24(6 )
12.44(316)
12.44(316)
40W
Fixture Model
No.
THK-GL/40
THK-GL/100
Wattage Input power
(W)
(W)
40
42
70
74
80
85
100
108
Lumens
VEL*
Voltage (V)
3,360
5,552
6,496
8,121
7,560
12,492
14,616
18,272
120-277
208-347
80W
Color Temperature
Ambient
(K)
Temperature (°C)
2720 - 6500
-20°C ~+40°C**
100W
Installation
IP Class
Roof mounts
IP43
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Garage Light
THK-GL2/40, THK-GL2/70
Product Features
of lighting fixture
Lamp and Ballast
THINK 40W-70W round tubular induction lamp features high lighting
efficacy, long lifetime, good color rendering, stable output, etc.
Applications
Dimensions
Photometric
40W
70W
Fixture Model
No.
THK-GL2/40
THK-GL2/70
Wattage Input power
(W)
(W)
40
42
70
74
Lumens
VEL*
Voltage (V)
3,360
5,552
7,560
12,492
120-277
Color Temperature
Ambient
(K)
Temperature (°C)
2720 - 6500
-20°C ~+40°C**
Installation
IP Class
Roof mounts
IP43
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Garage Light
THK-TSK
Product Features
High purity aluminum reflector
Lamp and Ballast
THINK 40W, 70W, 80W square tubular induction lamp features high lighting efficacy,
Applications
Dimensions
Φ14.92(379)
11.34(288)
Photometric
Φ9.37(238)
4-Φ
0.3
1(8
)
Φ9.37(238)
40W
80W
Fixture Model
No.
Wattage
(W)
Power (W)
40
42
2,940
6,615
THK-TSK
70
72
5,880
13,230
80
92
7,338
16,511
Input
Wattage
Lumens
VEL*
(W)
Voltage (V)
Color Temperature
(K)
120-277
2720 - 6500
Ambient
Temperature (°C)
Installation
IP Class
THD
-20°C ~+40°C**
Roof mounts
IP43
< 20%
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Surface
Mounted Light
THK-FR1/100, THK-FR1/150
THK-FR2/100, THK-FR2/150
Product Features
FR1 : UV stabilized and heat resistant polycarbonate lens
FR2 : Clear tempered glass lens with beautiful contour
of lighting fixture
Lamp and Ballast
THINK 100W-150W square tubular induction lamp features high
lighting efficacy, long lifetime, good color rendering, stable output, etc.
Applications
Photometric
Parking garages, gas stations, schools,
shopping malls, etc.
Dimensions
70W
100W
150W
Fixture Model
No.
THK-FR1/100
THK-FR1/150
THK-FR2/100
THK-FR2/150
Wattage
(W)
Input power
40
70
80
100
120
150
40
70
80
100
120
150
42
74
82
105
126
154
42
74
82
105
126
154
(W)
Lumens
VEL*
Voltage (V)
3,150
5,880
6,576
8,424
10,080
11,589
N/A
5,880
6,576
8,424
10,080
11,589
7,088
13,230
14,796
18,954
22,680
26,075
N/A
13,230
14,796
18,954
22,680
26,075
120-277
Color
Temperature
(K)
Ambient
Temperature
(°C)
Installation
IP Class
2720 - 6500
-40°C ~+40°C
Roof mounts
IP65
120-277
208-347
120-277
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Flood Light
THK-FL1/100. THK-FL1/120
THK-FL1/150. THK-FL1/200
Product Features
Anodized aluminum reflector and clear tempered glass lens are designed to
optimize light distribution
Lamp and Ballast
THINK 70W-200W square tubular induction lamp features high
Intant on restrike
100,000 hr life expectancy on bulb
Dimensions
Photometric
70W
80W
100W
Fixture Model
No.
THK-FL1/100
THK-FL1/120
THK-FL1/150
THK-FL1/200
Wattage
(W)
Input power
70
80
100
120
150
200
74
84
102
126
154
210
(W)
Lumens
5,600
6,400
7,624
10,080
11,564
16,800
VEL*
12,600
14,400
17,154
22,680
26,019
37,800
Color
Ambient
(K)
(°C)
Voltage (V)
Temperature Temperature
Installation
IP Class
120-277
208-347
2720 - 6500 -20°C ~+40°C
Round pole
IP65
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Flood Light
THK-FL2/100
Product Features
Anodized aluminum reflector and clear tempered glass lens are designed to
optimize light distribution
Lamp and Ballast
THINK 85W ball type or 70W-250W round tubular induction lamp features high
Photometric
Dimensions
70W
Fixture Model
No.
THK-FL2/100
THK-FL2/150
THK-FL2/200
THK-FL2/250
Wattage
(W)
Input power
70
80
100
120
150
200
250
74
84
102
126
154
210
260
(W)
Lumens
VEL*
5,600
6,400
7,624
10,080
11,564
16,800
N/A
12,600
14,400
17,154
22,680
26,019
37,800
N/A
Voltage (V)
80W
Color
Ambient
(K)
(°C)
100W
Temperature Temperature
Installation
IP Class
2720 - 6500 -20°C ~+40°C
Round pole
IP65
120-277
208-347
120-277
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Flood Light
THK-FL3
Product Features
Square welded aluminum housing with powder coated finish for corrosion-resistance
Simple and concise contour, hydro-formed aluminum reflector for 300W and 400W models
with good optical performance
Flat transparent temper glass lens with good lighting penetration
Optional slip fitter and bracket installation
Separated lamp and gear compartment for long lifetime
Generator fastened with spring clip for convenient assembly and maintenance
Lamp and Ballast
THINK induction lamp features high lighting efficacy, long lifetime, good color rendering,
stable output, etc.
Dimensions
Fixture Model
No.
Wattage
(W)
Input power
THK-FL3/150
THK-FL3/200
THK-FL3/250
THK-FL3/300
THK-FL3/400
150
200
250
300
400
154
210
265
315
419
(W)
Lumens
VEL*
13,797
16,800
21,200
25,200
33,600
27,594
37,800
48,150
56,700
75,600
Color
Ambient
Voltage (V) Temperature Temperature
(°C)
(K)
120-277
208-347
2720 - 6500
-20°C ~+40°C**
Installation
IP Class
Split Fitter,
Square Split Fitter
IP54
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Barn Light
THK-BL
Product Features
High pressure die cast aluminum alloy casing with powder coating
for corrosion resistance and durable use
Heat resistant acrylic hood with beautiful contour and low glare lighting
Intelligent infrared sensor
Lamp and Ballast
THINK 40W-100W round tubular induction lamp features high lighting efficacy,
Dimensions
Photometric
55W
100W
Fixture Model
No.
THK-BL
Wattage
(W)
Lumens
VEL*
40
70
80
100
2,800
5,600
6,400
7,624
6,300
12,600
14,400
17,154
Color
Ambient
e (K)
(°C)
120-277
2720 - 6500 -20°C ~+40°C
Installation
Round pole
IP Class
IP55
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Wallpack Light
THK-WP
Product Features
Anodized aluminum reflector and prismatic glass lens
Lamp and Ballast
Applications
Photometric
Parks, shopping malls, outlets, plazas, city
halls, historic areas, etc.
Dimensions
18.11(460)
13.46(342)
Mounting dimensions
)
8(7
2.99(76)
0.39(10)
5.0(127)
9.06(230)
0.2
70W
80W
100W
Fixture Model
No.
Wattage
(W)
THK-WP
40
70
80
100
Input
Power
(W)
40
75
84
108
Lumens
VEL*
2,988
5,600
6,300
8,072
6,723
12,600
14,175
18,162
Color
Ambient
e (K)
(°C)
120-277
208-347
Installation
2720 - 6500 -20°C ~+40°C Vertical wall
IP Class
IP54
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Induction Lamps
How people see and are psychologically impacted by
lighting has been a subject of much study and discussion for
years. Describing light as "lumen output" and measuring it
as "foot candles" on a work surface have been the
traditional ways of describing and defining how much light
is required to perform a variety of tasks. However, that is
being re-examined based on results of studies on visual
performance and the psychological impacts of lighting.
Additionally, the "color rendering index" (CRI), correlated
color temperature (CCT) and Kelvin color temperature
describe the quality of the light (relating to how true colors
appear compared to under a noon north sky on a clear
day).
As lighting technology evolves into various types and
colors, simply measuring the lumens proves not to be fully
adequate in predicting how well people can see. An
excellent example is the low-sodium lamp which produces
many lumens, but only two colors (yellow and gray); the
ability to make out details, beyond shapes of objects, is lost
under this light source. Different light sources produce light
in different spectral ranges and there is a wide variety of
spectral output available in led, THINK and fluorescent
lamps.
Vision itself is affected by many factors, from light intensity,
distribution, color, and contrast, to reflections, glare, air
quality, motion of subjects and viewers. Our eyes use
different parts to see in bright light and low light conditions.
The eye contains cones and rods which were thought to
work in opposite conditions. Cones provide color vision and
fine detail (photopic) in bright light and rods take over in
dim light (scotopic). In bright light our pupils contract
allowing more detail to be perceived, while depth of field
and perceived brightness also increase. In low light our
eyes dilate to allow more light in.
Light meters and recommended light levels for tasks have
traditionally been calibrated for daytime viewing, and
general interior lighting, based on the photopic response.
However, studies are indicating that the scotopic vision is
more involved in interior lighting than thought, and affects
pupil size. At recent conferences, some presenters
encouraged designers to specify the photopic/scotopic
(P/S) ratio of lamps when selecting them in order to get
better design, efficiency, and better vision for occupants.
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Induction Lamps
Sam Berman—formerly with the Lighting Systems Research
Group at Lawrence Berkeley Laboratory and a major
supporter of the importance of the P/S ratio in lighting
selection—developed a conversion factor that applies the
P/S ratio to lumen output of various light sources, and then
expresses the effective lumens the eye will perceive for
vision based on the size of the pupil and the effect on vision
(see below). Some lamps, like high-pressure sodium and
metal-halide, lose most of their output using this method,
while others like high-quality fluorescent lamps, led lamps
and THINK lamps gain substantially.
Recent studies seem to favor white light for viewing moving
objects in low-light conditions, such as spotting a
pedestrian or animal on the side of the road at night. Some
cities opt to use white light rather than the yellowish light
of high pressure sodium in hopes of reducing accidents.
White light is proving to have advantages for visual
performance. Current codes and standards are based on
measurements that do not address the impact of pupil
lumens, which can be vastly different from traditionally
measured lumen output of lamps. Studies on the relevance
of light spectrum and the mechanics of vision are ongoing,
and codes and standards may reflect this in the future.
The correction factors applied to conventional values of
lumens per watt yield a value for pupil lumens per watt,
which is a measure of how effectively the eye sees the light
that is emitted. This is due to the pupil being more
receptive to light at the blue end of the spectrum in low
light conditions.
Conversion Factors for Lumens to Pupil Lumens
Light Source
THINK 6,500K
THINK 5,000K
5,000K T5 Fluorescent
4,100K T8 Fluorescent
Clear Metal Halide
High Pressure Sodium
Lumens per watt (P/S Ratio) Pupil Lumens per watt Lumen maintenance* Adjusted Lumens
85
85
100
90
85
165
2,25
1,96
1,83
1,62
1,49
0,38
192
167
183
145
126
63
0,94
0,94
0,94
0,94
0,58
0,89
181
157
173
137
74
57
*Lumen depreciation factor after 8,000 hours
www.reonac.com
800.561.2876
INDUCTION LIGHTING
Contact Information
THINK GREEN SOLUTIONS
• Headquarters (Montreal)
Montreal
180 Ave. du Voyageur,
Pointe-Claire, QC, H9R 6A8
Tel: 800.561.2876
Fax: 514.428.9572
Email: [email protected]
www.reonac.com
800.561.2876

our complete - Think Green Solutions

Transcription

Similar documents