C ombina tion s Ite m

< 9 mm
max. width of the chain: 9 mm
< 9 mm
rear wheel easy removable
Hebie GmbH & Co KG
Sandhagen 16 | 33617 Bielefeld
Fon00 49 (0)5 21 9 14 19 -0
Fax00 49 (0)5 21 9 14 19 40
www.hebie.de | [email protected]
Germany
Item
Front part
L (+ 7 cm)
teeth
front
38
various
42
single chain wheel
44
L (+ 7 cm)
48
L in mm
435-486
484-535
(do not shorten)
Bosch Gen II (incl. sprocket)
Please pay attention to the
programmed gear ratio.
*
SRAM i-MOTION 3
Shimano Nexus 3/7/8
Shimano Alfine 8/11 (Mount-
ing advice, not for Di2)
Rear part
several more
SRAM i-MOTION 9/G8/G9
SPEEDHUB (not for 13 teeth)
various
NuVinci Harmony
NuVinci N360
Bosch Gen II with
Shimano Nexus, Alfine
or NuVinci N360
18
Hebie no.
0350F 38
0350F 38L
0350F 42
0350F 42L
0350F 44
0350F 44L
0350F 48
0350F 18B
0350F 18BL
0350R D18
18-22
15-17
16-18
16-22
16-22
19-23
16-23
for Nexus
0350R I18
0350R S15
0350R D16
0350R N16
0350R NV16
0350R DB
Item
CG open
teeth
rear
for
dérailleur *
teeth
front
38
42
Hebie no.
0359 38
0359 42
* single chain wheel, suitable for hub gears, chain tensioners and Dual Drive
Combinations
< 9 mm
improved longevity of the chain
by less maintenance
grammed by the bike manufacturer, otherwise the drive train could display an error message. Eventually you have to use another sprocket to keep the gear ratio.
easy mounting without tools
teeth
rear
for
L (+ 7 cm)
CHAINGLIDER Bosch Gen II needs the special Hebie sprocket for 18 teeth.
*DoThe
not change the gear ratio (ratio teeth front : ratio teeth rear) which was pro-
9032 | Februar 2015
extra light: approx. 250 g
Item
Front
part
350F 38
350F 42
Rear part 350R ...
D18
x
x
x
350F 44
350F 48
S15
x
I18
D16
x
x
x
x
x
x
x
x
N16
NV16
x
x
x
x
x
x
teeth
rear
15-17
18-22
16-22
15-17
19-21
18-22
16-18
16-22
15-17
19-21
18-22
16-18
16-22
16-18
All CHAINGLIDER front parts can be shortened (except Bosch) and the rear parts fit to all
standard sprockets (with Alfine: look at mounting advice PDF on our website) XL-Version (+
7 cm) for 38, 42 und 44 available, same combinations as mentioned above
Innovatives für dein Rad. Seit 1868.
Stay clean.
A
The self-supporting gear protection for
the modern urban means of transport:
Mounting
Your bike.
B
For 100 years Hebie has been making bikes into true means of transport. Today Hebie
produces carriers, mudguards, stands and chainguards. The CHAINGLIDER has set a
milestone in modern bike history with a visual and functional optimisation of clothing and
gear protection.
CHAINGLIDER rear part
0350R I18 (i-MOTION)
CHAINGLIDER rear part
0350R S15 (SPEEDHUB)
CHAINGLIDER rear part
0350R D18 (various)
The CHAINGLIDER program is composed of four front sections for the chain sizes 38,
42, 44 and 48 teeth, each with five combinable rear sections for diverse types of gear
shifts (see table Item). Additionally various models are available in extra long (except 48 +
CGopen).
Please do not bend the CHAINGLIDER
when mounting.
Lay parts A and B around the chain and
the chain ring. At the points marked
please press strongly against the
chain ring/the chain, so that the
flange clicks into place completely
(Illu 01). C and D around the rear sprocket.
Dérailleur cable lie generally outside of the
chain ring. D enfolds A, B and C.
lubrication
hole
C
D
Please check movability.
A special version with front and rear part is available for the Bosch Drive Unit, 2. generation. The necessary 18 teeth sprocket is delivered with the front part.
CHAINGLIDER
for NuVinci
Before assembling please be careful to:
special
CHAINGLIDER
CHAINGLIDER rear part
0350R N16 (NuVinci Harmony)
CHAINGLIDER for Bosch Gen II
front 0350F 18B + rear 0350R DB
CHAINGLIDER rear part
0350R NV16 (NuVinci N360)
CHAINGLIDER open
width of chain wheel:
max. width of chain:
ideal axis distance:
max. 3,0 mm
9 mm
445-475 mm
L -530 mm
• lubricate the chain sufficiently
• keep the clipping surface free from lubrications
• not to use a chain with spring link
(please note the max. width of chain)
• note the specified chain tension
• clean the CHAINGLIDER inside regularly
• capacity approx. min. 15.000 km
After adjusting the chain adjust the
CHAINGLIDER as well.
can be shortened
(at least 2-3 notches
should be left)
The CHAINGLIDER open can be used for bikes with hubgears and dérailleurs (dual drive).
Please check after assembling:
02
01+
03
D enfolds A,B and C. the highlighted
link of part C enfolds D visibly.
Please note:
(no links for SPEEDHUB and i-MOTION)
The CHAINGLIDER have
different numbers fo snap fits.
The corresponding snap fit
Please check that each of them
connection has to click into place.
are snapped in correctly.
01
02
03