Compendium of urban bike parts

Transcription

hebie
Compendium of
urban bike parts
Issue 2013
Notes:
modern.urban.mobile.
Always stay nice and clean.
that's one of our commandments:
reliable
down-to-earth
likeable
environmentally-friendly
attentive
fair
just
Just standing pretty.
is part of our regimen:
looking good
far-sighted
initiative
communicative
direct
Neat transportation.
is a basic need:
informs
innovative
financially independent
success-oriented
growth-oriented
always.simply.neat.
Mission statement
Always to remain clean!
This has been our mission statement since many years.
We have taken up the challenge of combining ecology and
economy. Assuming responsibility for today‘s and tomorrow‘s
generations is a very important issue for us.
The way the company is handling resources and eco-friendly
products and getting involved in environmental projects
shows its responsibility and ecological commitment.
Our employees identify themselves very strongly with the
company and its goals - after all they manufacture products
for the most eco-friendly mode of transport, i.e., the bicycle!
We have been manufacturing bicycles as a means of transport
for 100 years and are aware that we are privileged to work
in an industry that is perfectly suited for giving special
importance to environmental protection!
We are committed to our mission statement and we shall continue to make sure that more and more people opt for cleanliness.
Bielefeld, August 2012
Page 3
Notes:
Table of contents
Chainguard
Chainrings..............................................1-3
List chainring - cranks.................................3
Chainguard for hub gears................................5-9
Chainguard for derailleur gear..........................9-13
Mounting & accessory parts for chainguards..............13-19
FIXED GUARD and chainguard aluminium....................19-23
CHAINFIX................................................23
CHAINGLIDER
CHAINGLIDER - single part front.........................27
CHAINGLIDER - single part rear..........................27-29
CHAINGLIDER - mounting..................................29
Mudguards
Mudguards...............................................31-37
Spare & accessory parts for mudguards...................37-39
FIXED GUARD.............................................39
Carriers
Carriers................................................41-49
LOW RIDER...............................................49
Accessories for carriers................................51-53
Small parts for carriers................................53-55
bootbag
bootbags................................................57
bootbag - Accessories...................................59
Stands
Central stand...........................................61-65
Rear stand..............................................65-71
Spare parts for stands..................................71-77
Stabilizer
Stabilizer..............................................79
Spare parts for stabilizer..............................81-83
Handles
Handles.................................................85
Spoke protector
Spoke protector.........................................87
Coupling
Coupling................................................89-91
Page 5
Notes:
Chainring | Chainguard
0323 E5
CHAINRING 323 / 48 teeth
RRP:
12,95 EUR
Part
Chainring 323 for chain wheels with 48 teeth
Suitable for Shimano crank sets from 1993 (groups DeoreDX, -LX, Exage, Altus)
Outer diameter approx. 21 cm
Delivery incl. metal thread bolt standard 8 mm
Sturdy plastic material
Color: Blue-transparent
0324 E5
RRP:
12,95 EUR
Part
Chainring 324 for chain wheels with 42-44 teeth
Suitable for Shimano crank sets from 1992 (groups DeoreXT, -LX, STX, Alivio, Acera, CX groups)
Incl. metal thread bolt standard 8 mm
0325 E5
RRP:
15,95 EUR
Part
Chainring 325 for chain wheels with 42-44 teeth
Suitable for Shimano crank sets from 2003 (groups DeoreXT, -LX, Alivio, Altus, Acera, Tourney, Saint)
0326 E5
RRP:
15,95 EUR
Part
Chainring 326 for chain wheels with 48 teeth Suitable for
Shimano crank sets from 2003 Deore-XT, -LX, Tourney)
0399 03
Metal thread piece 8 mm
RRP:
3,60 EUR
Part
Fixing screw f. chainring in 8 mm length
Bolt diameter approx. 20 mm
Cap diameter approx. 30 mm
Suitable for chainring 323/325
Color: Natural
0399 04
Metal thread piece 13.5 mm
RRP:
3,60 EUR
Part
Fixing screw f. chainring in 13.5 mm length
Bolt diameter approx. 20 mm
Cap diameter approx. 30 mm
Suitable for chainring 323/324/325
Color: Natural
Page 1
Notes:
FC
FC
FC
FC
FC
FC
FC
FC
ALIVIO
no group
TOURNEY
Chainring
325
0399 02
Year
For Shimano
Groups with
42-44 sprockets
SAINT
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
DEORE XT
HONE
DEORE LX
DEORE
0399 05
ACERA
ALTUS
TOURNEY
no group
326 323/24
Description
0310 E15
Year
from 1993
until 1994
1997-2002
2006
2007
M 800-3/-1
x
x
x
M 761
x
x
M 760
x
x
x
M 600-3
x
x
x
M 581
x
x
Conical clamp for hollow
M 580
x
shaft
M 540
x
M 531
x
x
x
M 530
x
x
x
M 411
x
x
M 410
x
x
M 20
x
M 341
x
x
M 340
x
CT 93
x
TX 70
x
x
x
TY 40
x
x
x
TS 32
x
x
TS 31
x
C 050
x
x
x
M 460
x
M 442
x
CHAINGUARD 310 / 38 teeth
For Shimano
Groups with
48 sprockets
Description
2005
2006
2007
M 761-3
x
x
x
CHAINGUARD 330x / 38 x teethx
M 581-3
M 531
x
x
x
M 530
x
x
x
T 411
x
T 303
x
x
x
M 411
x
M 540
x
x
x
M 442/443
x
TX 71
x
x
x
C 051
x
x
x
TY 33
x
x
x
TY 33 A
x
x
x
0330 E25
CHAINGUARD 330 / 38
teeth
Year
0330 E15
NEXAVE
ALIVIO
no group
TOURNEY
Order No. HEBIE Adapter, Conus
Set:
silver
For Shimano
Groups with
42-44 sprockets
Description
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
0340 E1
ALIVIO
ACERA
ALTUS
TOURNEY
no group
Year
from 1993
until 1994
HEBIE-Adapter, Conus-Sets
Fixing screw f. chainring in 18 mm length
0399 03
0399 04
0399 05
Bolt diameter approx. 20
mm
Conus
Threaded
Threaded
Conus
Cap diameter
mm
OctaThread approx.
Quill 30fitting
fitting
XT
LX
13.5 mm
Ø 20 mm
Ø 13 mm
link
shaft
8 mm
Suitable22x1
for chainring
323/324/325
included
extra
extra
extra
Color: Natural
x
x
x
x
x
x
x
RRP:
x
x
6,80 EUR
x
x
x
Part
x
x
x
x
x
Conical
clamp
for internal fixing ofx a chainring in hollow
x
x
x
shaft, e.g.
SHI-Hollow-Tech.
Set with 13 mm (for LX) and
x
x
20 mm (for
x XT)
x
x
x
plastic cone
set
x
x
x
Color: Black
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
RRP:
11,95 EUR
Part
Made from 2-component injection moulding, shock-resistant
plasticCrank
HEBIE Adapter, Conus Sets
Clips on to bracket (180
mm)
0399
03
0399 04
0399 05
Threaded
Threaded
Conus
Conus
Modern design
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
FC
HONE
DEORE LX
DEORE
Part
323
324
(max. 48 sprockets)
(max. 44 sprockets)
CHAINGUARD
310 for chain wheels
Deore DX, Deore LX, Exage, Altus A 10, Altus A
20
X up to 38 teeth
Deore XT, Deore LX, STX/STX RC,Alivio, 700 CX,
400 LX, Altus,
Acera
X
Adjustable
length
Deore LX – Deore, C 101, C 201, Tourney, Suntour
variousfor hub gears or single chain wheel
X
Suitable
NEXAVE
X
X
Order No. HEBIE Adapter, Conus Set:
DEORE XT
3,60 EUR
Chainguard for hub gears | Chainguard
List Chainring - Cranks | Chainguard
Year
SAINT
RRP:
x
x
x
x
x
x
x
x
Groups
DEORE XT
DEORE LX
DEORE
/24
2005
x
x
x
x
x
x
x
x
x
x
Crank
Order No. HEBIE Adapter, Conus Set:
ALIVIO
Chainring
325
T 303
x
x
x
M 411
x
M 540
x
x
x
M 442/443
x
TX 71
x
x
x
C 051
x
x
x
TY 33
x
x mm x
Metal thread piece
18
TY 33 A
x
x
x
2005
2006
2007
M 800-3/-1
x
x
x
M 761
x
x
M 760
x
x
x
M 600-3
x
x
x
M 581
x
x
M 580
x
M 540
x
CHAINGUARD 340x / 33 xteethx
M 531
M 530
x
x
x
M 411
x
x
M 410
x
x
M 20
x
M 341
x
x
M 340
x
CT 93
x
TX 70
x
x
x
TY 40
x
x
x
TS 32
x
x
TS 31
x
C 050
x
x
x
M 460
x
M 442
x
fitting
fitting
XT
8 mm
13.5 mm
Ø 20mm
Color: Black, transparent
included
extra
extra
x
x
x
x
x
x
x
x
x
x
x
x 330 for chain wheels
x
Chainguard
up to 38 teeth
x
Suitable xfor hub gears or single chain
wheel
x
x
Adapter for bracket 180 mm
x
x
x
Opening
approx.
120 mm
x
x
x
Wing length
adjustable from
x
x approx. 32-44 cm
x
Sturdy plastic
material x
x
x
Color: Black,
wing transparent
x
x
Octalink
Thread
22x1
Quill
shaft
RRP:
11,95 EUR
RRP: Crank
11,95 0399
EUR03
Part
RRP:
9,95 EUR
Part
LX
Ø 13mm
extra
x
Part
HEBIE-Adapter, Conus-Sets
0399 04
0399 05
Threaded
Threaded
Conus
Conus
Chainguard
330 Quill
for chain
wheels up
to 38 teeth
OctaThread
fitting
fitting
XT
LX
link
shaft
mm wheel
Ø 20 mm
Ø 13 mm
Suitable22x1
for hub
gears or8 mm
single 13.5
chain
included
extra
extra
extra
Adapter for bracket
180 mm
x
x
Opening approx. 120
mm
x
x
x
Wing length adjustable
from approx. 32-44 cm x
x
x
x
x
Color: Silver, wing transparent
x
x
x
x
x
x
x
x
x
x
x
x
x
Chainguard
x 340 for chain wheels up to
x 33 teeth
Suitable xfor hub gears or xsingle chain wheel
x
x
Adapter for
bracket 160 mmx
x
x
Opening approx.
102
mm
x
x
For system
x fixing C2-A, C2-B
x
x
x
Length approx.
39 cm
x look
x
Structural
x
x
x
x
Color: Black
x
x
x
x
Groups
Deore DX, Deore LX, Exage, Altus A 10, Altus A 20
Deore XT, Deore LX, STX/STX RC,Alivio, 700 CX, 400 LX, Altus, Acera
323
(max. 48 sprockets)
X
Page 3
324
(max. 44 sprockets)
X
Notes:
Chainguard for hub gears | Chainguard
0310 E15
RRP:
11,95 EUR
Part
CHAINGUARD 310 for chain wheels up to 38 teeth
Adjustable length
Suitable for hub gears or single chain wheel
plastic
Clips on to bracket (180 mm)
Modern design
Color: Black, transparent
0330 E15
RRP:
11,95 EUR
Part
Chainguard 330 for chain wheels up to 38 teeth
Opening approx. 120 mm
Wing length adjustable from approx. 32-44 cm
Color: Black, wing transparent
0330 E25
silver
RRP:
11,95 EUR
Part
Wing length adjustable from approx. 32-44 cm
Color: Silver, wing transparent
0340 E1
RRP:
9,95 EUR
Part
For system fixing C2-A, C2-B
Length approx. 39 cm
Structural look
Color: Black
0340 E2
silver
RRP:
9,95 EUR
Part
For system fixing C2-A, C2-B
Structural look
Color: Silver
0342 E1
RRP:
9,95 EUR
Part
For system fixing 970 front and 980 back
Color: Black
0342 E2
silver
RRP:
9,95 EUR
Part
Page 5
Notes:
Color: Black
0342 E2
silver
RRP:
9,95 EUR
Part
Color: Silver
0344 E1
CHAINGUARD 344 / 44-48 teeth
RRP:
9,95 EUR
Part
Chainguard 344 for chain wheels up to 44-48 teeth
For system fixing C2-A, C2-B back
Color: Black
0380 E1
RRP:
9,95 EUR
Part
Color: Black
0380 E2
silver
RRP:
9,95 EUR
Part
Color: Silver
0384 E1
RRP:
9,95 EUR
Part
Suitable for hub gears or single chain wheel.
for system fixing C2-A, C2-B back
Color: Black
0355 E1
RRP:
12,95 EUR
Part
Two-wing chainguard
Suitable for hub gears
For system fixing C2-A, C2-B (inclusive) back
0395R E15
black
RRP:
13,95 EUR
Part
Page 7
Notes:
For system fixing C2-A, C2-B (inclusive) back
0395R E15
black
RRP:
13,95 EUR
Part
Length adjustable
Color: black
0395R E25
black
RRP:
13,95 EUR
Part
Length adjustable
Color: Silver
Chainguard for for derailleur gear | Chainguard
0312 E15
RRP:
19,95 EUR
Part
Suitable for derailleurs
plastic
Clips on to bracket
incl. complete fixing (bracket and rubberised clip)
Cut-out for fast adjustment of the derailleur
Elegant, sporty bar, the perfect addition to the chainring
Color: Black
0313 E15
RRP:
22,95 EUR
Part
plastic
Clips on to bracket
incl. complete fixing (bracket and rubberised clip)
Modern design
Cut-out for fast adjustment of the derailleur
Color: Black-transparent
0360 E1
RRP:
11,95 EUR
Part
Also for system fixing 970 E front and 980 E back
Length approx. 41cm
Color: Black
0360 E2
silver
RRP:
11,95 EUR
Part
Length approx. 41cm
Page 9
Notes:
Length approx. 41cm
Color: Black
0360 E2
silver
RRP:
11,95 EUR
Part
Length approx. 41cm
Color: Silver
0368 E1
RRP:
11,95 EUR
Part
Color: Black
0368 E2
silver
RRP:
11,95 EUR
Part
Color: Silver
0390 E5
RRP:
27,95 EUR
Part
Chainguard 390 for chain wheels of 42-44 teeth
Includes all fixing parts
0391 E5
RRP:
27,95 EUR
Part
Suitable for derailleurs, light sporty design ("trouser
protector"), sturdy shock resistant plastic
Includes all fixing parts
0396R E15
RRP:
17,95 EUR
Part
Opening appr. 180 mm
Color: Black
0396R E25
silver
RRP:
17,95 EUR
Part
Page 11
Notes:
Color: Black
0396R E25
silver
RRP:
17,95 EUR
Part
Color: Silver
Mounting & accessory parts for chainguards | Chainguard
0963 12
Universal mount for rear
stay 12 mm Ø
RRP:
2,00 EUR
Part
Rear mounting clamp for the rear stay
For one-wing chainguards
Rubber-finish clamp
Suitable for rear stays up to 13 mm Ø
Incl. fixing bar
Length approx. 30 mm
Set incl. fixings
Color: Black
0963 19
Universal mount for rear
stay 19 mm Ø
RRP:
2,00 EUR
Part
Rear mounting clamp for the rear stay
For one-wing chainguards
Rubber-finish clamp
Suitable for rear stays up to 19 mm Ø
Incl. fixing bar
Set incl. fixings
Color: Black
0964 01
Screw for fixing front,
zinc-plated
RRP:
0,30 EUR
Part
Screw for front fixing bracket
Size M4,8x10 mm
Zinc-plated
Color: Silver
0964 03
Screw for fixing front,
black
RRP:
0,40 EUR
Part
Screw for front fixing bracket
Size M4,8x10 mm
Color: Black
0964 160
Bracket for chain case uni
160 mm
RRP:
1,80 EUR
Part
Universal bracket for chain cases with Ø of 160 mm
Up to approx. 33 teeth
Bottom bracket adapter BSA Ø 35 mm
Suitable for Hebie 340
Zinc-plated
No fixing screws
Color: Zinc-plated
0964 180
180 mm
RRP:
1,80 EUR
Part
Page
Suitable for Hebie 330/342/372 and 310
Zinc-plated
13
Notes:
Zinc-plated
No fixing screws
Color: Zinc-plated
0964 180
180 mm
RRP:
1,80 EUR
Part
Suitable for Hebie 330/342/372 and 310
Zinc-plated
No fixing screws
Color: Zinc-plated
0964 194
194 mm
RRP:
1,80 EUR
Part
Suitable for Hebie 384/385
Zinc-plated
No fixing screws
Color: Zinc-plated
0964 210
210 mm
RRP:
2,90 EUR
Part
Up to approx. 42 teeth, for 3-way
Aluminium
No fixing screws
Color: Zinc-plated
0964 219
219 mm
RRP:
2,90 EUR
Part
Suitable for Hebie 344/355/380/381
Aluminium
No fixing screws
Color: Zinc-plated
0964 230
230 mm
RRP:
2,90 EUR
Part
Up to approx. 48 teeth, for 3-way
Aluminium
No fixing screws
Color: Zinc-plated
0970 E
Universal (clip-on) bracket
front / C2-A
RRP:
11,95 EUR
Part
Universal (clip-on) fixing as bottom bracket mount
For bottom bracket diameter BSA 40-42 mm
Suitable for 1/3-way cranks
All models 33-48 teeth
Model C2-A/970
Adjustable
With fixing screws
Color: Black
0980 E
rear / C2-B
RRP:
6,90 EUR
Part
Universal chainguard clamp for front mounting of the
chainguard
Model C2-B/980
Suitable for all Hebie chainguards
Easy fitting as no piercing of chainguard required
Fixing is clamped
Page
Clamp can be adjusted horizontally and vertically
Color: Black
15
Notes:
Model C2-A/970
Adjustable
With fixing screws
Color: Black
0980 E
rear / C2-B
RRP:
6,90 EUR
Part
Universal chainguard clamp for front mounting of the
chainguard
Model C2-B/980
Suitable for all Hebie chainguards
Easy fitting as no piercing of chainguard required
Fixing is clamped
Clamp can be adjusted horizontally and vertically
Color: Black
0990 44 1
Special mount front for 390
RRP:
3,95 EUR
Part
Special bracket to mount the chainguard
Model 390
Up to 44 teeth
Bottom bracket adapter BSA
Color: Black
0991 48 1
Special mount front for 391
RRP:
3,95 EUR
Part
Special bracket to mount the chainguard
Model 391/313/312
Up to 48 teeth
Bottom bracket adapter BSA
Color: Black
0399 90
End piece rear for 390/391
RRP:
3,50 EUR
Part
End piece with special mount for chainguard
390/391, complete
Color: Transparent
0399 10
End piece for 0310/12/13
RRP:
3,50 EUR
Part
End piece with special mount for chainguard
0310/12/13, complete
Color: Transparent
0992 38
BOSCH bracket
38 teeth
RRP:
Part
For FIXED GUARD and CHAINBAR
For chain wheels up to 38 teeth
Color: Silver
0992 38 10
BOSCH bracket 38 teeth
RRP:
Part
For CHAINGUARD 310
Color: Silver
Page 17
Notes:
0992 38 10
RRP:
Part
For CHAINGUARD 310
Color: Silver
0992 44
RRP:
Part
For FIXED GUARD 392 and CHAINBAR 394
Color: Silver
FIXED GUARD and chainguard aluminium | Chainguard
0392 M 180
FIXED GUARD 392/180
RRP:
16,95 EUR
Part
Aluminium profile high-gloss finish
Profile width 2.5 cm
Length from centre axle approx. 48 cm
Suitable for profile mudguard 792
Ideal addition, e.g. to Gates belt transmission or fixedgear bikes.
Color: Polished aluminium
0392 M 195
FIXED GUARD 392/195
RRP:
16,95 EUR
Part
Ideal addition, e.g. to Gates belt transmission or fixedgear bikes.
0392 M 219
FIXED GUARD 392/220
RRP:
16,95 EUR
Part
Chainbar 392 for chain wheels up to 48 teeth
Ideal addition, e.g. to Gates belt transmission or fixedgear bikes
Page 19
Notes:
0394 E 180
CHAINBAR 394/180
RRP:
29,95 EUR
Part
Incl. fixing and plastic chain guide
0394 E 180B
CHAINBAR 394/180 with BOSCH-
RRP:
29,95 EUR
Part
Suitable for e-bikes with BOSCH system
0394 E 195
CHAINBAR 394/195
RRP:
29,95 EUR
Part
0394 E 219
CHAINBAR 394/219
RRP:
29,95 EUR
Part
0394 E 180 1
CHAINBAR 394/180 black
RRP:
29,95 EUR
Part
Aluminium profile
Color: black
Page 21
Notes:
0394 E 195 1
RRP:
29,95 EUR
Part
Aluminium profile
Color: Black
0394 E 219 1
RRP:
29,95 EUR
Part
Aluminium profile
Color: Black
Using the Hebie CHAINFIX gauge
Steps for using:
1. Position the CHAINFIX gauge at the
centre of the bottom bracket
2. First variant:
Read the number of teeth on
the chain ring.......
or
2. Read the diameter if latches are
provided (second variant)
2. Second variant:
Read the diameter if latches
are provided .......
•
Select the appropriate chain
guard from the Hebie catalogue
(see table)
Diameter of the latches:
160 mm to 230 mm
9 mm 3 mm
If a CHAINGLIDER is being attached
then only use this part of the
gauge and check:
•
Maximum chain width 9 mm
•
Maximum chain ring thickness 3 mm
Both the dimensions can be precisely
measured using a slide caliper!
2. Read the number of teeth on the
chain ring (first variant)
1. Position the CHAINFIX
gauge: at the centre of
the bottom bracket
•
Select the appropriate chain
guard from the Hebie catalogue
(see table)
•
then select the appropriate
latch / rear mounting
33 teeth to 48 teeth
Page 23
Notes:
- the newest generation
•
•
New closing technique with six „snap“ links
„plug and play“ system: all chainglider
parts (front and rear) are sold separately. You can combine each front and
rear part.
Chainglider technology
Items
•
•
•
•
item
for
Self-supporting
Easy and fast mounting without tools. No mounting parts needed.
Visual and functional optimisation for clothing and gear protection with
less maintenance
Weight approx. 250 gr. (front and rear part)
Width of chain wheel 3,0 mm
Max. width of chain 9,0 mm
Not to use a chain with spring link
teeth
rear
front part
38
XL (+ 7 cm)
misc.
XL (+ 7 cm)
teeth
front
42
single
chain wheel
44
XL (+ 7 cm)
48
rear part
CG open
*
misc.
i-MOTION
SPEEDHUB
0350F 48
NuVinci
Harmony
dérailleur*
18-22
15-17
16-18
16-22
38
42
Hebie-No.
0350F
0350F
0350F
0350F
0350F
0350F
0350F
0350R
0350R
0350R
0350R
0350R
38
38L
42
42L
44
44L
48
D18
I18
S15
D16
N16
Combinations
•
•
•
front
part
rear
rear
rear
part
part
part
350R D18 350R S15 350R I18
teeth
rear
x
15-17
18-22
15-17
19-21
18-22
15-17
19-21
18-22
16-18
350F 38
x
350F 42
x
x
x
x
350F 44
x
x
x
350 48 M1
special part
All Chainglider front parts can be shortened and the rear parts
fit to all standard sprockets.
XL-Version (+ 7 cm) for 38, 42 und 44 available, same combinations
as mentioned above
0359 38
0359 42
single chain wheel, suitable for hub gears, chain tensioners
and Dual Drive
Page 25
Notes:
single part front | CHAINGLIDER
0350F 38 E1
CHAINGLIDER front part teeth
38
RRP:
25,95 EUR
Part
Front part set single
(left and right side)
Standard length
Other sizes available:
0350F 42 E1 (42 teeth)
0350F 44 E1 (44 teeth)
0350F 48 (48 teeth)
Color: Black
0350F 38L M1
CHAINGLIDER front part teeth long version
38
RRP:
25,95 EUR
Part
Front part set single
Long version + 7 cm
0350F 42L E1 (42 teeth)
0350F 44L E1 (44 teeth)
Color: Black
0359 38 E1
CHAINGLIDER open 38 teeth
RRP:
26,95 EUR
Part
One-wing, self-supporting chainguard
For bikes with single chain wheel up to 38 teeth
Suitable for hub gears, or combined hub gear/derailleur
(e.g. Sram Dual Drive or Shimano Intego, etc.)
Also suitable for mounting with chain spanner (e.g.
Rohloff)
0359 42 E1 (for 42 teeth)
Color: Black
single part rear | CHAINGLIDER
0350R D18 E1
CHAINGLIDER rear part 18/22
teeth
RRP:
13,95 EUR
Part
Rear part set for standard hub gears (left and right side)
Suitable for sprocket with 18-22 teeth
Color: Black
0350R S15 E1
CHAINGLIDER rear part 15/17 teeth
RRP:
20,95 EUR
Part
Rear part set for Rohloff Speedhub
Color: Black
Page 27
Notes:
0350R I18 E1
RRP:
13,95 EUR
Part
Rear part set for Sram i-Motion (left and right side)
Color: Black
0350R D16 M1
RRP:
13,95 EUR
Part
Rear part set (left and right side)
Color: Black
0350R N16 E1
RRP:
20,95 EUR
Part
Rear part set for NuVinci Harmony
Color: Black
Montage CHAINGLIDER 3.0 | CHAINGLIDER
Mounting:
01
Please do not bend the CHAINGLIDER when
mounting!
Please note:
For the CHAINGLIDER open
there are only 4 flanges.
Lay parts A and B around the chain and
the chain ring. At the points marked
please press strongly against the chain
ring/the chain, so that the flange
clicks into place completely (Illustr.
01), C and D around the rear sprocket.
Dérailleur cables lie generally outside
of the chain ring. D enfolds A B and
C.
A
B
lubrication
hole
D
Please check movability. After adjusting
the chain please adjust the CHAINGLIDER
as well.
02
03
C
Please check that:
02
can be shortened
(at least 2-3 notches
should be left)
D enfolds A B and C. The highlighted
link of part C enfolds D visibly.
(no links for SPEEDHUB and i-Motion)
01+ The corresponding snap fit
03 connection has to click into place.
Page 29
Notes:
Mudguards | Mudguards
0780 42 E1
VIPER STADTMEISTER mudguard set 42mm 28"
RRP:
39,95 EUR
Set
Mudguard for 28-inch wheels
Width: 42 mm
Rear guard extends from sporty to all-round protection
Incl. fixings (screws, rack mount etc.) and stay set 799
uniVIP
Color: Black
0780 42 E2
VIPER STADTMEISTER - see
above in silver
RRP:
49,95 EUR
Set
Width: 42 mm
uniVIP
Color: Silver
0780 42 E3
VIPER STADTMEISTER - see
above in white
RRP:
39,95 EUR
Set
Width: 42 mm
uniVIP
Color: white
0725 E
VIPER X - clip-on guard
24"-29"
RRP:
23,95 EUR
Part
Exclusive splash guard for rear wheel, suitable for frames
with and without suspension
Special cross design
Robust quick-release device for all seat post diameters
(up to 42 mm tubes)
Easy to fit in a matter of seconds
Height and pitch angle continuously adjustable thanks to
stable double link
Guard length approx. 44 cm, width approx. 80 mm
Weight:
250 g
Perfect addition: Hebie 751F for front
Color: Black
0751 E
VIPER - clip-on guard set
24"-28"
RRP:
19,95 EUR
Set
Classic splash guard set for front and rear wheels in new
design
Excellent protection thanks to integrated splash guard
(nose piece)
Suitable for 24"-28"
Extremely warp-resistant due to special profile design and
long angular guide
Incl. fixings, seat post clamp
Guard length front: approx. 54 cm, rear: approx. 78 cm
Width approx. 60 cm
Weight: 450 g (incl. fixings)
Addition for: uniVIP 799 as stay set for extra fixing
Alternative: 770 or 761 for trekking, 742 for racing
Color: Black
Page 31
Notes:
0751F E
VIPER - clip-on guard set
suspension fork 24"-28"
RRP:
27,95 EUR
Set
Universal front splash guard for MTB full suspension
plus VIPER rear guard
Mounts either to the fork in the steer tube or through the
approved bracket
Incl. 2 x double bracket
Suitable for tube diameter from 18.5-26.8 mm
Lengths front: 19 cm and 30 cm, rear: approx. 78 cm
Width approx. 60 mm
Color: Black
0751F V E
VIPER - front clip-on guard
suspension fork 24"-28"
RRP:
15,95 EUR
Part
Front clip-on guard single
Model like 751F E (see above)
Good addition to rear guards 720 and 725
Color: Black
0761 E
VIPER-TREKKING - clip-on
guard set 28"
RRP:
19,95 EUR
Set
Classic trekking clip-on guard set 28"
Mount using approved standard bracket
Incl. fixing bracket and seat tube clamp
Width approx. 45 mm
Addition for: uniVIP 799 as stay set for extra fixing
Alternative: 751 for MTB or 742 for racing
Color: Black
0742 E
VIPER-RACING - clip-on guard
set racing 28"
RRP:
19,95 EUR
Set
Racing splash guard for front and rear, 28" (700C)
Good protection thanks to broad design and integrated
splash guard (nose piece)
Excellent rigidity
Approved standard fixings with bracket on fork and rear
stay
Incl. stainless steel fixings
Width approx. 35 mm
Alternative: 730 for racers
Color: Black
0730 E
Racing guard - single, front
or rear 28"
RRP:
6,95 EUR
Part
Racing splash guard like 742, but sold singly
Incl. fixing bracket
Guard length approx. 36 cm
Width approx. 35 mm
Color: Black
Page 33
Notes:
0756 E
Starter set 16”
RRP:
8,95 EUR
Set
Child's bike and MTB clip-on guard set for front and rear
Suitable for 16" wheels
Incl. fixings
Width approx. 55 mm
Color: Black
0752 E
Starter set 20”
RRP:
8,95 EUR
Set
Incl. fixings
Width approx. 55 mm
Color: Black
0754 E
Starter set 24”
RRP:
8,95 EUR
Set
Incl. fixings
Width approx. 55 mm
Color: Black
0759 E
Starter set 26”
RRP:
8,95 EUR
Set
Entry-level and MTB clip-on guard set for front and rear
Incl. fixings
Width approx. 60 mm
Color: Black
0760 E
Starter set 28”
RRP:
8,95 EUR
Set
Entry-level clip-on guard set for front and rear
Incl. fixings
Width approx. 40 mm
Color: Black
0774 E
MTB clip-on guard set 24"
RRP:
8,95 EUR
Set
MTB clip-on guard set for front and rear - thin profile!
(approx. max. 12 mm)
Incl. fixings
Width approx. 60 mm
Color: Black
Page 35
Notes:
0770 E
MTB clip-on guard set 26"
RRP:
9,95 EUR
Set
Special MTB clip-on guard set for front and rear - thin
profile! (approx. max. 14 mm)
Compatible with V-brake
Incl. fixings
Width approx. 60 mm
Alternative: 772 for bikes with full suspension or VIPER
751
Color: Black
Spare & accessory parts for mudguards | Mudguards
0799 01
Mounting bracket long
RRP:
4,50 EUR
Set
Mount with broad bracket
Long bracket for V-brake (seat tube clamp), e.g. Hebie
752,754,759
Bracket length 80 mm, width 25 mm
Incl. bolts 1 x 50 mm, 1 x 30 mm, 2 x nut and frame
adapter
Color: Natural
0799 03
Mounting bracket slim
RRP:
5,95 EUR
Set
Mount with slim bracket
Long bracket for V-brake (seat tube clamp),
e.g. Hebie 761-T, 742-R
Incl. bolts 1 x 50 mm, 1 x 30 mm, 2 x nut and frame
adapter
Color: Natural
0799 07
Mounting bracket small for
VIPER
RRP:
5,95 EUR
Set
Mount for Hebie 0751 VIPER
Straight long bracket
Incl. bolts 1x 50 mm, 1x 40 mm, 1x 30 mm, 2x nut and frame
adapter
Color: Natural
0799 06
Mounting bracket universal;
elbow broad
RRP:
2,40 EUR
Part
Mount with long elbow bracket
e.g. for Hebie 751, 760
For models with vertical bore
Color: Natural
0799 09
Mounting bracket universal;
elbow slim
RRP:
2,40 EUR
Part
Mount with slim elbow bracket
e.g. for Hebie 742, 761
For models with vertical bore
Color: Natural
Page 37
Notes:
0799 uniVIP
uniVIP - stay set for VIPER
guards
RRP:
12,95 EUR
Set
Accessory stay set for VIPER new
Set of 2 stainless steel stays with clips
Color: Black/stainless steel
FIXED GUARD and CHAINBAR | Mudguards
0792 28 E26
FIXED GUARD - Aluminium
profile mudguard 26 mm
RRP:
79,95 EUR
Set
Exclusive profile mudguard made from hand-polished
aluminium for 28" wheels
With complete stay set
Profile width approx. 26 mm (extra slim)
Best protection thanks to unusual length (length can be
adjusted individually and shortened)
Stylish and functional mudguard design for single-speed
and racing bikes
Perfect addition: Aluminium CHAINBAR 392 and 394
0792 28 E39
FIXED GUARD - Aluminium
profile mudguard 39 mm
RRP:
89,95 EUR
Set
as above
Profile width approx. 39 mm
Page 39
Notes:
Carriers | Carriers
0120 2 E1
CITY S
RRP:
49,95 EUR
Part
Sporty, slim system luggage carrier, facilitates narrow
silhouette
Slimmest luggage carrier
Sturdy and light 10 mm aluminium tube
Extremely stable universal mounting to the frame (26"-28")
Integrated carrier foot
Holds up to 40 kg
Incl. fixings 2 x double head clamp, 2 x head stay 160
straight, M5/M6 screw, weld plate for rear light
With integrated cable guide for lights
Also available with extra luggage system (3 stays)
Outer size 100 mm, length approx. 350 mm
Weight: 600 g (incl. fixings see above)
Diverse system / accessory products thanks to the
integrated QUICKSNAP system
Color: Black
0120 2 E2
CITY S
RRP:
49,95 EUR
Part
silhouette
Slimmest luggage carrier!
Holds up to 40 kg
Color: Silver
0120 2IL E1
CITY S with integrated light
RRP:
69,95 EUR
Part
Sporty, slim system luggage carrier with integrated BUSCH
& MÜLLER backlight and reflector, facilitates narrow
silhouette
Slimmest luggage carrier
Holds up to 25 kg
Color: Black
Page 41
Notes:
0120 3 E1
TOUR S
RRP:
54,95 EUR
Part
silhouette, slimmest luggage carrier!
Extremely stable universal mounting to the frame
(26"-28"), integrated carrier foot
Holds up to 40 kg
Color: Black
0120 3 E2
TOUR S
RRP:
54,95 EUR
Part
silhouette, slimmest luggage carrier!
Sturdy and light 10 mm aluminium tube, extremely stable
universal mounting to the frame (26"-28")
Holds up to 40 kg
Color: Silver
0130 2 E1
CITY M
RRP:
49,95 EUR
Part
Elegant system luggage carrier, with broad contact area
(120 mm), length 160 mm
Sturdy and light 10 mm aluminium tube, extremely stable
universal mounting to the frame (26"-28")
Holds up to 40 kg
Also available with extra luggage support (3-way strut)
With integrated light cable guide
Color: Black
0130 2 E2
CITY M
RRP:
49,95 EUR
Part
(120 mm), length 160 mm, sturdy and light 10 mm aluminium
tube, extremely stable universal mounting to the frame
(26"-28")
Holds up to 40 kg
Also available with extra luggage support (3-way strut)
Color: Silver
Page 43
Notes:
0130 3 E1
TOUR M
RRP:
54,95 EUR
Part
u
(26"-28")
Holds up to 40 kg
Color: Black
0130 3 E2
TOUR M
RRP:
54,95 EUR
Part
(26"-28")
Holds up to 40 kg
Color: Silver
0130 3IL E1
TOUR M with integrated light
RRP:
72,95 EUR
Part
(120 mm) and with integrated BUSCH & MÜLLER backlight and
reflector, length 160 mm, sturdy and light 10 mm aluminium
(26"-28")
Holds up to 25 kg
Color: Black
0190 E1
EXPEDITION
RRP:
79,95 EUR
Part
Universal system luggage carrier with bag holder for
touring bike
With broad contact area (120 mm)
Excellent weight/stability ratio
QUICKSNAP fitting
"Optimum weight support under extreme loads" - holds up to
40 kg
straight, M5/M6 screw, weld bar for rear light
Diverse system / accessory products, especially 195 LOW
RIDER
Color: Black
Page 45
Notes:
0190 E2
EXPEDITION
RRP:
79,95 EUR
Part
Universal system luggage carrier with bag holder for
touring bike
With broad contact area (120 mm)
Excellent weight/stability ratio
QUICKSNAP fitting
"Optimum weight support under extreme loads" - holds up to
40 kg
straight, M5/M6 screw, weld bar for rear light
Diverse system / accessory products, especially 195 LOW
RIDER
Color: Silver
0111 X10 E1
QUICKSNAP carrier E-BIKE BOSCH
RRP:
Part
System luggage carrier with space for battery for the
BOSCH system
On request
Color: Black
0111 X7/X8
QUICKSNAP carrier E-BIKE Ansmann
RRP:
Part
System luggage carrier with space for an ANSMANN battery
111 X7 (26"-28")
111 X8 (20") see illus.
Illustration shows battery
Order through Ansmann
Color: Black
0111 X4
Carrier e-bike - Flexaim
RRP:
Part
Luggage carrier with space for a Flexaim battery
On request
Color: Black
0199 uniQUICK
uniQUICK - platform for flat
surface
RRP:
17,95 EUR
Part
Pure QUICKSNAP system contact surface
Suitable for many uses
Add to an integrated frame or for the car ...
Color: Black
Page 47
Notes:
LOW RIDER | Carriers
0195 E1
LOW RIDER R
RRP:
54,95 EUR
Part
Sturdy Low Rider for extreme loads
Made from sturdy and light aluminium tubing
With bag support
Adjustable mounting clamps
Holds 2 x 10 kg
Incl. 6 x stay clamp and fixings
Add the 662 SL Low Rider stands
Color: Black
0195 E2
LOW RIDER R
RRP:
55,00 EUR
Part
Sturdy Low Rider for extreme loads
Made from sturdy and light aluminium tubing
With bag support
Adjustable mounting clamps
Holds 2 x 10 kg
Incl. 6 x stay clamp and fixings
Add the 662 SL Low Rider stands
Color: Silver
0125 E1
REAR RIDER - Low Rider for
rear
RRP:
74,95 EUR
Part
New type of Low Rider for luggage transport
Very attractive transport of e.g bags on side of
rear wheel
Holds 10 kg (2 x 5 kg)
Mount on rear on the luggage carrier eyelets/
dropouts
Note: Use fixing clamps from SRAM
Received Eurobike-Award 2010
Color: Black
Accessories for carriers | Carriers
0199 FKS 1
Spring clamp QS slim
RRP:
9,95 EUR
Part
Slim spring clamp for 100 mm carrier
Fits directly to carrier system
Permanent constant spring tension
Clamp width 100 mm
Suitable for luggage carrier 120
Color: Black
0199 FKB 1
Spring clamp QS wide
RRP:
9,95 EUR
Part
Wide spring clamp for 120 mm carrier
Fits directly to carrier system
Permanent constant spring tension
Clamp width 120 mm
Suitable for luggage carrier 130, 190, Hebie e-bike
carriers
Color: Black
Page 49
Notes:
0199 DH
Double tension belt rear
RRP:
7,95 EUR
Part
Sturdy double tension belt for rear luggage carrier
With sturdy handle, made of weather-resistant rubber
compound
Total length approx. 50 cm (length adjustable)
Addition to 130,190 rear carrier
Color: Black
0199 EK
Basket large
RRP:
39,95 EUR
Part
Sturdy wire basket for rear carrier
Compatible with QUICKSNAP system
Incl. aluminium handle with padded grip and fitted
QUICKSNAP adapter
Size approx. 300x400x130 mm (l/w/h)
Suitable for rear carriers 120, 130, 180, 190
Color: Black
0199 BX
Box for QUICKSNAP system
RRP:
69,95 EUR
Part
Sturdy hardshell box
With integrated QUICKSNAP adapter
Lockable
Additional click fastening
Incl. rubberised handle
Size approx. 370x260x200 mm
Suitable for Hebie rear carriers 120, 130, 180, 190
Color: Black
0199 AKH
QUICKSNAP adapter
RRP:
11,95 EUR
Part
Adapter plate for the QUICKSNAP system
Facilitates individual conversion of existing
transport method (bags, basket etc.) for Hebie
QUICKSNAP luggage carriers
Small profile
Sturdy glass-fibre reinforced plastic
Size approx. 230x125 mm
Suitable for all bootbags and for Hebie rear racks 120,
130 190
Color: Black
0199 uniSNAP
uniSNAP - universal adapter
for all luggage carriers
RRP:
15,95 EUR
Part
Universal adapter for all luggage carriers from 100 - 150
mm wide
Made from glass-fibre reinforced plastic
Suitable for individual conversion of existing transport
method (e.g. bags)
Fits bootbag etc.
Color: Black
0662 SL
E
lite FIX sl - stand for Low
Rider
RRP:
26,95 EUR
Part
Special Low Rider stand
Short design
Prevents the fork falling when loaded and ensures improved
stability (IMPORTANT: only use Low Rider support as an
extra! The bike must never be supported with the LR
support alone.)
Incl. SL fixing clamps 8/10 mm (for
diff. tube diameters)
Low weight and high stability due to aluminium/GRP (2C)
design
Total stand length approx. 230 mm
Color: Aluminium/black
Page 51
Notes:
Small parts for carriers | Carriers
0199 K160 E
Head stay 160 mm - straight,
polished aluminium
RRP:
4,65 EUR
Set
Straight round stay
Diameter approx. 8 mm
Other available lengths:
200 mm (0199 K200 E)
240 mm (0199 K240 E)
0199 K160 M1
Head stay 160 mm - straight,
aluminium black
RRP:
4,65 EUR
Set
Straight round stay
200 mm (0199 K200 M1)
240 mm (0199 K240 M1)
Color: Black
0199 K160R E
Head stay 160 mm - curved,
polished aluminium
RRP:
4,65 EUR
Set
Special head stay
Curved round stay
200 mm (0199 K200R E)
240 mm (0199 K240R E)
0199 K160R M1
Head stay 160 mm - curved,
aluminium black
RRP:
4,65 EUR
Set
Special head stay
Curved round stay
200 mm (0199 K200R M1)
240 mm (0199 K240R M1)
Color: Black
0199 SA
Bridge adapter
RRP:
3,95 EUR
Part
Special adapter for bikes without soldered eyelets on the
seat strut tubing
Fit to the bar plate or stay bridge
Incl. bolts and nuts
0199 KL8
Clamp SL8
RRP:
1,95 EUR
Part
Aluminium stay clamp for 8 mm tubing, conical
Single
Page 53
Notes:
0199 KL10
Clamp SL10
RRP:
1,95 EUR
Part
Aluminium stay clamp for 10 mm tubing, conical
Single
0199 KL SW
Rotating head clamp
RRP:
8,95 EUR
Set
Rotating head clamp (adjustable double head clamp)
To fit to the head stay on various brackets
Each suitable for 8/10 mm tube diameter
2 units
0199 SH
Headlight bracket
RRP:
5,95 EUR
Part
opt. mount for e.g. headlights on the
luggage carrier
Suitable for wire/tube 7/8 mm
Incl. fixings for holder and lamp
Page 55
Notes:
bootbags | bootbag
0199 BG B
Bootbag - leather brown with
QUICKSNAP adapter 199 AKH
RRP:
295,00 EUR
Part
Very elegant bootbag made of genuine leather
Handmade using tanned Argentinian leather
With integrated inner pocket
Incl. "big belt" shoulder strap (very
high-quality version!) and QUICKSNAP adapter
Handmade in Germany!
10-year guarantee!
Color: Leather brown
0199 BG S
Bootbag - leather black with
QUICKSNAP adapter 199 AKH
RRP:
295,00 EUR
Part
high-quality version!) and QUICKSNAP adapter
10-year guarantee!
Color: Leather black
0199 BG B UNI
bootbag - leather brown with
uniSNAP universal adapter
RRP:
295,00 EUR
Part
high-quality version!) and uniSNAP universal adapter
10-year guarantee!
Color: Leather brown
0199 BG S UNI
bootbag - leather black with
uniSNAP universal adapter
RRP:
295,00 EUR
Part
high-quality version!) and uniSNAP universal adapter
10-year guarantee!
Color: Leather black
0199
0199 BG
BG 10N
70N
Bootbag
Bootbag - black
orange
29,95
29,95 EUR
EUR
Part
Part
Bootbag
Bootbag (without
(without adapter)
adapter)
Made
Made from
from extremely
extremely low-maintenance
low-maintenance plastic
plastic
Length
approx.
350
mm
Width
Width approx.
approx. 205
205 mm
mm
Height
Height approx.
approx. 350
350 mm
mm
Other available
colours:
0199 BG 20N red
0199 BG 30N sand
0199 BG 40N green
0199 BG 50N white
0199 BG 60N blue
0199 BG 70N orange
0199 BG TX
RRP:
RRP:
Additional
Additional adapter
adapter plates
plates available:
available:
for
QUICKSNAP
carriers:
for QUICKSNAP carriers: 199
199 AKH
AKH QUICKSNAP
QUICKSNAP adapter
adapter
for
for other
other carriers:
carriers: 199
199 uniSNAP
uniSNAP universal
universal adapter
adapter
Color:
Color: Black
Orange
bootbag textile
RRP:
39,95 EUR
Part
Carrier bag
without adapter
Additional adapter plates available:
for QUICKSNAP carriers: 199 AKH QUICKSNAP adapter
for other carriers: 199 uniSNAP universal adapter
Color: Black
Accessories | bootbag
Page 57
0199 BG GL
Big belt - shoulder strap
RRP:
9,95 EUR
Part
Notes:
Accessories | bootbag
0199 BG GL
Big belt - shoulder strap
for bootbag
RRP:
9,95 EUR
Part
Flexible plastic shoulder strap
Extra long for maximum adjustability
Suitable as a shoulder strap for the bootbag or to
close the bootbag
Color: Black
0199 BG GK
Small string - carry strap
for bootbag
RRP:
7,95 EUR
Part
Grab handle as short carry aid
Also great as a trouser strap
Color: Black
0199 BG RH
Cover cap - rain cover for
bootbag
RRP:
13,95 EUR
Part
Classic rain cover for bootbag
Is simply pulled over bootbag and covers the opening and
the front completely
Incl. elastic
Waterproof
Color: Black
0199 ZTX
bootbag fabric bag
RRP:
Part
Fabric bag for bootbag
and basket 0199 EK
Color: black/white
0199 AKH
QUICKSNAP adapter
RRP:
11,95 EUR
Part
Adapter plate for the QUICKSNAP system
Facilitates individual conversion of existing
transport method (bags, basket etc.) for Hebie
QUICKSNAP luggage carriers
Small profile
Sturdy glass-fibre reinforced plastic
Suitable for all bootbags and for Hebie rear racks 120,
130 190
Color: Black
0199 uniSNAP
uniSNAP - universal adapter
for all luggage carriers
RRP:
15,95 EUR
Part
Universal adapter for all luggage carriers from 100 - 150
mm wide
Made from glass-fibre reinforced plastic
Suitable for individual conversion of existing transport
method (e.g. bags)
Fits bootbag etc.
Color: Black
Page 59
Notes:
Central stand | Stands
0605 KL E1
REX s - bipod stand in short
length
Safety
note:
RRP:
37,95 EUR
Part
To prevent unintentional turning of the handlebar, it
Classic
bipod
stand in to
robust
steel
ensures
is strongly
advisable
install
an design,
additional
steering
stability
even 695/696).
under heavy load,
damper (Hebie
max. load capacity up to 60 kg
Suitable for 24"-29" (please consider height!)
RRP:
37,95 EUR
Part
Short version suitable for bikes with a chain stay maximum
height of up to 26 cm (from ground plate) above the ground
Classic bipod stand in robust steel design, ensures
Incl. counter plate with frame protector and M10 screw
stability even under heavy load,
max. load capacity up to 60 kg
Alternatives: lite REX t (690) or lite REX c (690C)
Suitable for 24"-29" (please consider height!)
Color: Black
height of up to 26 cm (from ground plate) above the ground
RRP:counter plate
37,95
Part
Incl.
withEUR
frame protector and
M10 screw
As
before, butlite
standard
for c
up(690C)
to 29 cm
Alternatives:
REX tlength
(690) version
or lite REX
from
ground
plate
Color: Black
Max. load capacity up to 60 kg
RRP:
37,95 EUR
Part
Color: Black
Central stand | Stands
0605 KL E1
REX s - bipod stand in short
length
0605 NL E1
REX m - bipod stand in
standard length
0605 NL E1
standard length
0605 NL E3
standard length, zinc-plated
0605 NL E3
standard length, zinc-plated
0605 ÜL E1
REX l - bipod stand in
extra-long length
0605 ÜL E1
REX l - bipod stand in
extra-long length
0606 KL E1
REX s - Holland bipod stand
in short length
0606 KL E1
REX s - Holland bipod stand
in short length
0606 NL E1
REX m - Holland bipod stand
in standard length
0606 NL E1
REX m - Holland bipod stand
in standard length
As before, but standard length version for up to 29 cm
from ground plate
RRP: 900 g (incl.
37,95fixings)
EUR
Part
Weight:
Color: Black
from ground plate
RRP:
37,95 EUR
Part
Color: Zinc-plated
from ground plate
RRP: 900 g (incl.
37,95fixings)
EUR
Part
Weight:
Color: Zinc-plated
As before, but extra-long version for up to 32 cm from
ground plate
RRP:
37,95 EUR
Part
Color: Black
As before, but extra-long version for up to 32 cm from
ground plate
RRP: 930 g (incl.
40,95fixings)
EUR
Part
Weight:
Color: Black
Special version of the bipod stand for Holland bikes
With adapter for slim Holland stand plates (e.g. Gazelle
etc.)
Incl. counter plate with frame protector and screw
RRP:
40,95 EUR
Part
Short version for up to 27.5 cm from ground plate
Special version of the bipod stand for Holland bikes
With adapter for slim Holland stand plates (e.g. Gazelle
Color: Black
etc.)
Incl. counter plate with frame protector and screw
RRP:version for
40,95
Part
Short
up to EUR
27.5 cm from ground
plate
As
before,
standard
length version for up to 30.5 cm
Weight:
930but
g (incl.
fixings)
from
ground
plate
Color: Black
RRP:
40,95 EUR
Part
Color: Black
As before, but standard length version for up to 30.5 cm
from ground plate
Color: Black
Page 61
Notes:
0690C KL E
lite REX cs - bipod stand
Roll feet in short length
RRP:
39,95 EUR
Part
Modern bipod stand in 2-component design (2C)
Combines very high capacity with low net weight,
load capacity up to 50 kg
Extra sturdy stand and light handling thanks to broad roll
feet, aluminium stand legs, internal, low-maintenance
folding mechanism
Incl. cutout for shift cable
Incl. counter plate, frame protector, screw suitable for
24"-29"
(please consider height!)
height of up to 27.5 cm (from ground plate) above the
ground
0690C NL E
lite REX cm - bipod stand
Roll feet in standard length
RRP:
39,95 EUR
Part
from ground plate
0690 NL E
lite REX tm - bipod stand
Aluminium in standard length
RRP:
39,95 EUR
Part
As before, but slimmer version without roll feet for up to
29 cm from ground plate
0690 ÜL E
lite REX tl - bipod stand
Aluminium in extra-long
RRP:
39,95 EUR
Part
As before, but slimmer design without roll feet
Extra-long version for up to 32 cm from ground plate
0630 E
LEX - central stand standard
RRP:
19,95 EUR
Part
Solid central stand for daily use
Very sturdy steel tube design
Discreet appearance - support folds away parallel to the
chain stay
Suitable for special frame designs, e.g. disc brake
adapters, Rohloff gears, SHI roller brake torque support,
etc.
Continuously adjustable without tools
Sturdy stand thanks to large foot
Fits directly to the stand plate
Incl. fixing screw
Load capacity up to 40 kg
26"-28"
Color: Black
Page 63
Notes:
0632 E
0632 E
eLEX - central stand heavy
load
eLEX - central stand heavy
load
0636 NL E15
Alu LEX - central stand
aluminium
0636 NL E15
aluminium
0636 NL E25
aluminium
0636 NL E25
Tip:
aluminium
Very well suited for e-bikes and pedelecs:
FIX 40one
- rear
direct
Model 0661
690C, the
in 2Cstand
design
or
E elegant
fixing
(KSA40)
Model 632, the one with heavy-duty stand.
RRP:
25,95 EUR
Part
Special central heavy load stand
Ideal for e-bikes and pedelecs
Extremely stable thanks to broad weight distribution and
large foot
Slim design for optimum foot space in travelling position
Fits directly to the stand plate (or plus counter plate
0699 40)
Suitable for 26"-28" bikes
RRP: 400 g (incl.
25,95fixings)
EUR
Part
Weight:
Color: Black
Special central heavy load stand
Ideal for e-bikes and pedelecs
RRP:
15,95 EUR
Part
Extremely stable thanks to broad weight distribution and
large foot
Modern elegant central stand
Slim design for optimum foot space in travelling position
Special attractive aluminium die-cast version with clear
Fits directly to the stand plate (or plus counter plate
applications in different colours
0699 40)
Extremely stable thanks to sturdy link and large foot
Suitable for 26"-28" bikes
New type of length adjusting mechanism without tools
Fits to the stand plate
Stand leg standard length 276 mm
Color: Black
RRP:
15,95
EURHebie stand plate
Part
for
wheels or stand
plate:
699-40
Modern elegant central stand
Special attractive aluminium die-cast version with clear
RRP:
15,95 EUR
Part
applications in different colours
Extremely stable thanks to sturdy link and large foot
As before, but in polished aluminium/natural
New type of length adjusting mechanism without tools
Color: Aluminium / silver
Fits to the stand plate
Stand leg standard length 276 mm
for wheels or stand plate: Hebie stand plate 699-40
RRP:
15,95Rear
EUR
Please note:
standPart
| Stands
As before,
but in
polished
aluminium/natural
Classic
two-leg
stands
or central
stands are mounted
Color:
Aluminium
/ or
silver
on
the
stand
plate
the
chainstays
behind
the bottom
RRP:
24,95 EUR
Part
bracket. It is generally mounted on a counter plate, for
e.g. Hebie 699 40. In order to ensure long-lasting and
Form-fit standard solution for direct dropout fixing
reliable functioning of the standard two-leg and central
KSA40 (bikes
with
KSA40parts
device;
special
adapter
on the
stands,
all the
moving
should
be oiled
regularly
chain
stay,
hole spacing
40 mm)
and
dirt
accumulation
should
be removed.
Stand can be fitted here directly on the frame, making a
completely rigid and stable connection
Broad foot for stability
26"-28" length adjustment with twisting mechanism
Incl. 2 x fixing screw
RRP: 390 g (incl.
24,95fixings)
EUR
Part
Weight:
Alternative model: lite FIX 40 (662)
Form-fit
standard solution for direct dropout fixing
Color: Black
KSA40 (bikes with KSA40 device; special adapter on the
chain stay, hole spacing 40 mm)
RRP:
26,95 EUR
Part
Stand can be fitted here directly on the frame, making a
completely rigid and stable connection
Like FIX 40 (661), but light version with aluminium tube
Broad foot for stability
Incl. 2 x fixing screw
Color: Black
Rear stand | Stands
0661 E
FIX 40 - rear stand direct
fixing (KSA40)
0662 E
lite FIX 40 - rear stand
direct fixing KSA40
0662 E
direct fixing KSA40
RRP:
26,95 EUR
Part
Page
Like FIX 40 (661), but light version with aluminium
tube 65
Notes:
Color: Black
0662 E
direct fixing KSA40
RRP:
26,95 EUR
Part
Like FIX 40 (661), but light version with aluminium tube
0662 SL E
lite FIX sl - stand for Low
Rider
RRP:
26,95 EUR
Part
Special Low Rider stand
Short design
Prevents the fork falling when loaded and ensures improved
stability (IMPORTANT: only use Low Rider support as an
extra! The bike must never be supported with the LR
support alone.)
Incl. SL fixing clamps 8/10 mm (for
diff. tube diameters)
Low weight and high stability due to aluminium/GRP (2C)
design
Total stand length approx. 230 mm
0664 E
e FIX 40 - rear stand selffolding KSA40
RRP:
29,95 EUR
Part
Self-folding rear stand for direct fitting on the dropout
(KSA40: hole spacing 40 mm)
For all e-bikes with KSA40, also for the class up to 45
km/h that requires registration
Color: Black
0663 E
FIX 18 - rear stand direct
fixing KSA18
RRP:
24,95 EUR
Part
Like FIX 40 (661), but for dropout direct fitting KSA18
(18 mm hole spacing)
0665 E
e FIX 18 - rear stand selffolding KSA18
RRP:
29,95 EUR
Part
Self-folding rear stand for direct fitting on the dropout
(KSA18: hole spacing 18 mm)
For all e-bikes with KSA18, also for the class up to 45
km/h that requires registration
Color: Black
0611 E1
FOX s - rear stand standard
RRP:
36,95 EUR
Part
The classic from Hebie for derailleurs!
Sturdy rear stand - fits to the frame triangle for bikes
with derailleur
For steel frames
steel head
Optimum stability thanks to 5-point fixing and large foot
Continuously adjustable using twisting mechanism
Stainless steel screws
Page 67
Alternative models: AX (616) or FOX m (671)
Color: Black
Notes:
0671 E
FOX m - rear stand GRP/steel
prism
RRP:
19,95 EUR
Part
Universal rear stand with prism adapter
This makes it suitable for many different frame designs
Sturdy GRP/steel design made from GRP head with steel
inserts and steel tube leg
Incl. screws
Maintenance-free
Load capacity 25 kg
Alternative models: FOX s (611) or AX (616 oder 618)
Color: Black
0672V E
FOX l - rear stand universal
RRP:
26,95 EUR
Part
Universal rear stand with prism adapter and head bar
This makes it suitable for many different frame designs
also with disc brake adapter
With prism counter plate for almost all tube and geometry
designs (tubing up to 27-mm diameter , also oval, or
square)
Head bar adjustable and variable length
Sturdy GRP/steel design made from GRP head with steel
inserts and steel tube leg
Incl. screws
Maintenance-free
Load capacity 25 kg
Alternative models: FOX s (611), FOX m (671) or AX (616 or
618)
Color: Black
0672V 29 E
FOX l - rear stand universal
for 29"
RRP:
26,95 EUR
Part
As above
Longer tube
Suitable for 29" bikes
Color: Black
0616 E
AX
- rear stand axle
RRP:
29,95 EUR
Part
The classic from Hebie for hub gears!
Sturdy rear stand - fits to the rear frame with axle
fittings
Suitable for bikes with hub gear and oversized frames up
to 25 mm
Steel head
High stability thanks to:
- Narrow fit on touring or sport frames,
- Additional axle fittings,
- Large foot
Continuously adjustable using twisting mechanism
Incl. adapter for diff. frame designs (tube diameter)
Alternative models: FOX s (611), FOX m (671) or AX (618)
Color: Black
Page 69
Notes:
0680 E
lite AX - rear stand clip-on
for quick release
RRP:
34,95 EUR
Part
Universal stand solution for all MTB and trekking bikes
with quick release axle, also for multi-link full
suspension
Universal stand with vertical axle adapter
(derailleur), fits under the quick release
High adjusting range in the setting angle
Maintenance-free
Color: Black
0618 E
AX 618 - rear stand
RRP:
29,90 EUR
Part
Universal stand solution for all bicycles with frame
eyelets
Solution for all kinds of mounting problems (thickness of
tubes, form of frame, suspension, disc brake...)
Anti-twist device through eyelet fixation
Suitable for quick release and hub gears
Maintenance-free
Color: Black
0675 SET
uniSTAND - the jack-of-alltrades with coupling
RRP:
59,95 EUR
Part
Rear stand incl. Weber coupling
Designed in close cooperation with Weber products, the 675
stand is compatible with different brackets, tube
thicknesses and diameters thanks to its quick clamp with
little space on the inside of the frame. The head with
integrated coupling comes from Weber, the leg with spring
and foot from Hebie.
Load capacity 25 kg
Spare parts for stands | Stands
0699 01
Spare foot for bipod stand
REX (605)
RRP:
1,95 EUR
Part
Spare foot short
Plastic
Suitable for e.g. REX (605)
Color: Black
0699 05
Spare foot for rear stand
RRP:
1,95 EUR
Part
Spare foot short
Plastic
Suitable for e.g. 610 and lite AX (680)
Color: Black
Page 71
Notes:
0699 29
lite REX t (690)
RRP:
2,40 EUR
Part
Spare foot broad
Plastic
Suitable for e.g. lite REX t (690)
Color: Black
0699 31
lite REX c (690c)
RRP:
Part
Spare foot broad
Plastic
Suitable for e.g. lite REX c (690c)
Color: Black
0699 10
Spare foot for rear stand
RRP:
3,95 EUR
Part
Spare foot long
Incl. screw set
Plastic
Suitable for e.g. FIX 40 (661), FOX m (671), LEX (630,
631)
Color: Black
0699 40
GRP stand plate
RRP:
5,95 EUR
Part
GRP stand plate universal
Enables you to fit stands when there is no stand plate on
the frame for the stand adapter
Size approx. 65 x 30 mm
For screw M10
Single loose
Suitable for all standard central stands
Stand mounting usually only possible in conjunction with
Hebie counter plate
699 02
Color: Black
0699 02
Stand counterplate universal
RRP:
3,95 EUR
Set
Counter plate single universal
Enables you to fit stands when there is no stand plate
on the frame for the stand adapter
Size 70 x 30 mm
Incl. conical screw M10x55 mm
Suitable for e.g. bipod stand REX (605)
Stand mounting usually only possible in conjunction with a
Hebie stand plate 699 40
Color: Natural
0699 02 L
Stand counter plate
universal-long
RRP:
3,95 EUR
Set
Counter plate single universal
Size 70x30 mm
Incl. conical screw M10x65 mm
Suitable for e.g. bipod stands REX (605) and lite REX
(690)
Color: Natural
Page 73
Notes:
0699 04
Adapter plate Holland
RRP:
9,95 EUR
Set
Adapter plate Holland incl. aluminium counter plate
Adapter size approx. 65x30 mm
Counter plate approx. 50x35 mm
Incl. fixing screw M8x70 mm
Suitable for bipod stand REX Holland (606)
Color: Natural
0699 06 E
Adapter plate
RRP:
6,95 EUR
Set
Special adapter for fixing bipod stands
For improved stand height adjustment
GRP plate
Incl. screw M10x25 mm
Suitable for e.g. bipod stand REX (605)
Color: Black
0699 08
Adapter Holland M8 without
counter plate
RRP:
5,95 EUR
Part
Adapter Holland single without counter plate
Incl. countersunk screw M8x70 mm
Single loose
Suitable for e.g. bipod stand REX Holland (606)
Color: Black
0699 09
Adapter Holland M10 with
counter plate
RRP:
9,95 EUR
Part
Adapter Holland single
With counter plate
Incl. countersunk screw M10x65 mm
Single loose
Color: Black
0699 24
Adapter Holland loose
RRP:
4,95 EUR
Part
Adapter Holland single
For M8-M10
Single loose
Without accessories
Color: Natural
0699 03
Spring for bipod stand
RRP:
1,95 EUR
Part
Spare spring single, stainless steel
Length approx. 110 m
Suitable for e.g. bipod stand REX (605) and REX Holland
(606)
Color: Stainless steel
0699 28
Countersunk screw for bipod
stand M8x70
RRP:
1,95 EUR
Part
Spare screw single
Size M8x70 mm
Incl. nut
Suitable for bipod stand REX Holland (606)
Other sizes:
M8x80 mm (0699 30)
Color: Natural
Page 75
Notes:
0699 25
Countersunk screw for bipod
stand M10x55
RRP:
1,95 EUR
Part
Spare screw single
Size M10x55 mm
Suitable for bipod stand REX (605) / lite REX (690)
Other lengths:
M10x65 mm (0699 26)
M10x80 mm (0699 27)
Color: Natural
0699 23
Screw V2A M6x16
RRP:
0,45 EUR
Part
Stand spare screw V2A
Size M6x16 mm
DIN 7991
With screw locking device
Single loose
e.g. for FIX 40 (661)
0699 62
Screw V2A M6x20
RRP:
0,55 EUR
Part
Stand spare screw V2A with square nut M6
Size M6x20 mm
DIN 7991
With screw locking device
Single loose
e.g. for FIX 40 (662)
0699 63
Screw V2A for FIX 18 (663)
RRP:
Set
Stand spare screw V2A with Schnorr washer
Size M6x25mm
for FIX 18 (663)
Page 77
Notes:
Stabilizer | Stabilizer
0695 32 E
Steering stabilizer standard
Function
of
the EUR
steering damper:
RRP:
12,95
Set
Steering dampers make it difficult to turn the handlebar
Steering
stabilizer
standard
withstand),
stainless
steel
spring
while
parking
(e.g. on
a two-leg
while
making
Suitable
tube diameter
28-32atmmthe same time
the
wheel for
significantly
morefrom
steady,
improving
the general
Spring length
approx. riding
78 mm comfort due to higher stability
andset
theincl.
directional
(e.g. clamp
while and
riding
Complete
spring, stability
cover, plastic
with baskets or bags). Frame, electric light cable and
fixings
other accessories are no longer damaged when the handleWeight: 60 g
bar is turned.
Color: Black
Stabilizer | Stabilizer
0695
E
0695UNI
32 E
for suspension fork
0695 UNI E
0696 62 E
for suspension fork
Steering stabilizer
elastomer standard
0696 62 E
0696 UNI E
Steering stabilizer
elastomer standard
Steering stabilizer
elastomer for suspension
0696 UNI E
Steering stabilizer
elastomer for suspension
RRP:
RRP:
17,95
12,95 EUR
EUR
Set
Set
Steering stabilizer standard for bikes with suspension
Steering stabilizer standard with stainless steel spring
fork
Suitable for tube diameter from 28-32 mm
Spring length approx. 78 mm
Stainless steel spring
Complete set incl. spring, cover, plastic clamp and
fixings
Complete set incl. bracket for fork, spring, cover,
Weight: 60 g
plastic clamp and fixings
Color: Black
Color: Black
RRP:
RRP:
Steering
17,95 EUR
25,95 EUR
stabilizer standard
RRP:
RRP:
Steering
25,95 EUR
27,95 EUR
stabiliser with permanently
Set
Set
with suspension
for bikes
fork
Steering stabiliser with permanently elastic
elastomer stabilizer element
Stainless steel spring
Clear design
Complete set incl. bracket for fork, spring, cover,
Suitable for direct fitting
plastic clamp and fixings
Incl. frame clamp and all fixings
Durable and corrosion-resistant
Color: Black
Color: Black
Set
Set
elastic
Steering stabilizer with permanently elastic
Clear design
Suitable for bikes with suspension fork, for shaft tube
Suitable for direct fitting
diameter from 20.5-25.7 mm
Incl. frame clamp and all fixings
Clear design
Incl. conical clamp for fork shaft tube and fixing disc
Also suitable for direct fitting
Color: Black
RRP: Black 27,95 EUR
Set
Color:
Steering stabilizer with permanently elastic
Suitable for bikes with suspension fork, for shaft tube
diameter from 20.5-25.7 mm
Clear design
Incl. conical clamp for fork shaft tube and fixing disc
Also suitable for direct fitting
Color: Black
Page 79
Notes:
Spare parts for stabilizer | Stabilizer
0699 90
Plastic block for direct
fitting
RRP:
1,95 EUR
Part
Plastic block for direct fitting of the steering
stabilizer
(if bike has frame eyelets)
Thread M5
Color: Black
0699 97
Elastomer element single
RRP:
7,95 EUR
Part
Elastomer element, the durable alternative to conventional
springs, weather-resistant
Stainless steel mount
0699 11
Spring for steering
stabilizer standard
RRP:
3,95 EUR
Part
Replacement/spare spring single
Stainless steel
78 mm total length
Other lengths:
65 mm (0699 19) short
108 mm (0699 20) long
135 mm (0699 22) extra long
0699 13
Spring cover
RRP:
1,95 EUR
Part
Plastic cover for steel spring on steering stabilizer
Suitable for 695
Size approx. 10 mm
Color: Black
0699 12
Stainless steel bracket
standard
RRP:
1,95 EUR
Part
Bracket to mount the steering stabilizer standard
Side with long hole approx. 17 mm long
Normal side approx. 13 mm long
Suitable for 695 and 696
Single loose
0699 15
Stainless steel bracket long
RRP:
1,95 EUR
Part
Bracket to mount the steering stabilizer
Under-tube mounting
Side with long hole approx. 23 mm long
Normal side approx. 21 mm long
Suitable for 695
Single loose
Page 81
Notes:
0699 18
Steel bracket for suspension
fork
RRP:
4,95 EUR
Part
Special long steel bracket to mount the
steering stabilizer on suspension forks
With long hole
Incl. washer (place between screw and
steel bracket)
Single loose
0699 16
Frame clamp plastic
RRP:
2,95 EUR
Part
Plastic clamp with rubber pad on
tubing
Incl. fixing screw/nut
Suitable for tubing of 28-32 mm
Suitable for 695
Color: Black
0699 17
Frame clamp stainless steel
RRP:
9,95 EUR
Part
Stainless steel clamp with rubber pad to mount on the
tubing
Incl. plastic head, fixings
Special screw/nut
Suitable for tubing of 32-62 mm
Color: Black
0699 14
Ring bolt M5
RRP:
2,95 EUR
Part
Fixing screw for fork
Size M5 x 50 mm
Incl. knurled serrated nut
Suitable for 695
Color: Black
0699 96
Clamping cone for suspension
fork
RRP:
9,95 EUR
Part
Clamping cone to mount on the fork shaft tube
Plastic block for simple direct fitting of
the steering stabilizer
Diameter from 20.5-25.7 mm
Incl. fixing plate for spring
Alternative: for threaded eyelets on the frame 695/696
Color: Silver
Page 83
Notes:
Handles | Handles
0813 M
GOLF 2
RRP:
4,95 EUR
Ergonomic sport grip with knuckle protection
Slim grip for city and trekking
Diameter: 22 mm
Color: Black
0814 E99
Child safety grip
RRP:
11,95 EUR
Special safety grip for children's bikes with impact
protection
Black group with colourful ball insert, ball diameter
approx. 55 mm
Diameter: 22 mm
Handle depth approx. 8.5 mm
Total length approx. 125 mm
Color: Black/coloured
0840 M
MTB
RRP:
4,95 EUR
Solid, sporty group for MTB, trekking and city bikes
Light, conical design
Absorbs vibrations and increases ride comfort
Tactile surface
Low-wear rubber grip
Diameter: 22 mm
Color: Black
0850 M
DELTA
RRP:
4,95 EUR
Ergonomic all-round grip
Improved contact surface and more hold
With embossed DELTA logo
Diameter: 22 mm
Color: Black
Eco-friendly substances:
All Hebie handle grips are made from eco-friendly TPE
and are thus free from PVC, softeners that contain hazardous substances like phthalates or PAH.
Page 85
Notes:
Spoke protector | Spoke protector
1020 M5
Spoke protector disc for
cogset
RRP:
2,00 EUR
Part
Suitable for fitting on cogsets
For sprocket wheels 26-30 teeth
Smooth inside without pegs
Inner size approx. 38 mm
Outer diameter approx. 160 mm
Color: Transparent
1030 M5
Spoke protector disc for
cartridge / cogset
RRP:
2,00 EUR
Part
Suitable for fitting on cassette hubs
For sprocket wheels 26-30 teeth
With 3 x fixing pegs inside
Color: Transparent
1040 M5
Spoke protector disc Mega
Range
RRP:
2,00 EUR
Part
Suitable for fitting on cassette hubs
For large sprocket wheels up to 36 teeth (e.g. Mega Range)
With 3 x fixing pegs inside
Color: Transparent
Page 87
Notes:
Coupling | Coupling
0501 E
Coupling F1 for saddle bolt
Suitability
of trailer
couplings:
RRP:
27,95
EUR
Set
Hebie bicycle trailer couplings are not permitted for
Bikewith
trailer
coupling
to mount onThey
the are
saddle
clamp
use
motorised
two-wheelers!
also
not bolt
Ball coupling
suitable
for trailers with only one wheel! Additional
products
that
are recommended:
Two-leg
stand
Incl. frame
support
for horizontal
fitting
on605/690
drawingand
steering
vehicle damper 695/696 - the two together guarantee a
reliable
stand for
bicycles
with
Minimum length
saddle
bolt 45
mm a trailer.
Incl. retaining pin
Without drawbar cap piece/seat
Trailer
to 40 kg,
bearing load up Set
to 4 kg (10%)
RRP: load up27,95
EUR
GS tested
Recommendation:
add steering
stabilizer
695/696
andbolt
bipod
Bike trailer coupling
to mount
on the saddle
clamp
stand
REX
(605)
Ball coupling
Color:frame
Blacksupport for horizontal fitting on drawing
Incl.
Coupling | Coupling
0501 E
Coupling F1 for saddle bolt
0501 Set
Coupling F1 with seat post
adapter
0501 Set
Coupling F1 with seat post
adapter
0503 H E
Coupling F3 bike
0503 H E
Coupling F3 bike
0599 01
Cap piece for F1
0599 01
0599 02
Cap piece for F1
Cap piece for F3
vehicle
Minimum
saddle bolt
RRP: length 36,95
EUR45 mm
Set
Incl. retaining pin
Without
drawbar
cap piece/seat
Bike trailer
coupling
with seat post adapter /
Trailer
load
up tofor
40 fitting
kg, bearing
load
up to
4 kg (10%)
universal
adapter
to the
seat
post
GS
tested
Independent
of saddle clamp bolt
Recommendation:
add steering
stabilizer
695/696
bipod
Universal - adjuster
sleeve for
seat posts
with and
diameter
stand
REX (605)
of 26.0-31.0
mm
Color:
TrailerBlack
load up to 40 kg, bearing load up to 4 kg
GS tested
Recommendation:
add steering
RRP:
36,95
EUR stabilizer 695/696
Set and bipod
stand REX (605) - both guarantee stability for bikes with
trailers
Bike trailer coupling with seat post adapter /
Color: Black
universal
adapter for fitting to the seat post
Independent of saddle clamp bolt
Universal
with diameter
RRP: - adjuster
49,95sleeve
EURfor seat postsSet
of 26.0-31.0 mm
Trailer
load up
to 40 kg,
load up to 4 kg
Bike trailer
coupling
for bearing
heavy loads
GS
tested design for fitting on the luggage carrier
Reinforced
Recommendation:
add steering
stabilizer
bipod
Towing ball coupling
with retaining
pin 695/696
and cap and
piece
stand
REX (605)fitting
- both on
guarantee
stability
for bikes with
For horizontal
the drawing
vehicle
trailers
Incl. drawbar cap piece/seat
Color:
WithoutBlack
fixings
GS tested
Trailer
to 60 kgEUR
RRP: load up49,95
Set
Bearing load up to 10 kg
Color:
Zinc coupling for heavy loads
Bike trailer
Reinforced design for fitting on the luggage carrier
Towing
cap piece
RRP: ball coupling
2,95 with
EURretaining pin and
Part
For horizontal fitting on the drawing vehicle
Incl.
drawbar
cap piece/seat
Drawbar
cap piece
(seat) for Hebie bike trailer couplings
Without
fixings
F1
GS
tested
Total
length approx. 85 mm (slim version)
Trailer
load up to 60 kg
Single loose
Bearing
load up to 10 kg
Color: Zinc
Color: Zinc
RRP:
RRP:
2,95 EUR
2,95 EUR
Part
Part
2,95 EUR
Part
Drawbar cap piece (seat) for Hebie bike trailer couplings
F1
Total
length approx. 85 mm (slim version)
F3
Single
loose approx. 85 mm (broad version)
Total length
Color: loose
Zinc
Single
Color: Zinc
0599 02
Cap piece for F3
RRP:
F3
Total length approx. 85 mm (broad version)
Single loose
Color: Zinc
Page 89
Notes:
0599 03
Locking pin for F1
RRP:
3,95 EUR
Part
Locking pin for Hebie bike trailer coupling F1
Pin length approx. 45 mm
With spring clip
Single loose
Color: Black
0599 05
Seat post adapter for F1
RRP:
19,95 EUR
Part
Special seat post adapter, enables fitting of trailer
coupling model F1 directly on the seat post
Independent of saddle clamp bolt
Suitable for seat posts with diameter from 26.0-31.0 mm
Only for all models coupling F1
Weight approx. 280 g
Please note the trailer load and bearing load for the
coupling!
Color: Black
Please note:
It is very important to check the distance between the
ball and retaining bracket before every drive. If the
bicycle falls with the trailer attached to it, then a
reliable functioning of the coupling can no longer be
guaranteed. In such cases, please check the entire system!
Page 91
Notes:
Page 93
modern. urban. mobile.
August 2012
Hebie GmbH & Co. KG
Sandhagen 16
33617 Bielefeld | Germany
Fon 0049 (0)521 91419-0
Fax 0049 (0)521 91419-40
[email protected] | www.hebie.de

Compendium of urban bike parts

Transcription

Similar documents

Biorb 105

FLASH WAX!

Dreambaby-On-The-Go - Tee

Monday 25th July, 2016 Gareth Baxter

top gear

HALF PRICE SUMMER SALE HALF PRICE

subscriptions

File - Turn the Page Bookshop

mother`s day gift edit

20% OFF