EdiPower II HM30-SLM Series Secondary Optical Reflector Datasheet

EdiPower II HM30-SLM Series Secondary Optical Reflector Datasheet

EdiPower II Series
EdiPower II HM30-SLM Series
Secondary Optical Reflector
Datasheet
Features :
High Efficiency
Available in various beams
Mirror reflection technology
Suitable for “Lambertian” type design
Adaptive Ring:
13CRESLM0103
Protective Cover:
13CRPHM00106
Equipped with adaptive ring and protective cover of HM30
Typical Applications :
Spot Lamps
Decorative Lights
Track Light
Down Light
General Lighting
General Characteristics :
Reflector Material:
AL
Operating Temperature Range: -40oC / + 70oC
Storage Temperature Range:
-40oC / + 70oC
Usage and Maintenance :
1.Clean reflectors with mild soap and water and a soft cloth.
2.Do not use any commercial cleaning solvents on reflectors, like alcohol.
3.Please handle or install reflectors with wearing gloves, skin oils may damage reflectors or optical
characteristic.
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 1
1
Table of Contents
General Information..........................................................................................................................................................3
13RFEL120001 Specification..........................................................................................................................................4
13RFEL130001 Specification..........................................................................................................................................5
13RFEL150001 Specification..........................................................................................................................................6
13RFEL118001 Specification..........................................................................................................................................7
13RFEL130002 Specification..........................................................................................................................................8
13RFEL145001 Specification..........................................................................................................................................9
13RFEL125002 Specification..........................................................................................................................................10
13RFEL120002 Specification..........................................................................................................................................11
13RFEL135002 Specification..........................................................................................................................................12
13RFEL150002 Specification..........................................................................................................................................13
Package Information.........................................................................................................................................................14
Revision History..................................................................................................................................................................15
About Edison Opto............................................................................................................................................................15
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 1
2
General Information
Introduction
To provide the handy optical kits for all sorts of lighting, Edison Opto develop and support all kinds
of secondary optics which can meet the self-development components of Edison Opto's perfectly.
It contains a lens and a reflector.
Ordering Code Format
1
1
3
RF
xxx
xx
xxx
X1
X2
X3
X4
X5
X6
X1
X2
X3
X4
X5
X6
Category
Type
Sort
Component
Beam Angle
Serial Number
Material
3
L2~L6
RF
Reflectors
EL1
EdiLex
01~18
01~18
20
18.5~22.5
25
22.6~27.5
30
27.6~32.5
35
32.6~37.5
40
37.6~42.5
45
42.6~47.5
50
47.6~55.0
60
55.1~65.0
70
65.1~75.0
80
75.1~85.0
90
85.1~95.0
A0
95.1~105.0
A1
105.1~115.0
A2
115.1~125.0
A3
125.1~135.0
A4
135.1~145.0
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
--
--
version : 1
3
13RFEL120001 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot light
Spot beam angle
Decorative Lighting
AR111 look
AR111
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
5430
22°
5430 lx
89°
1358 lx
2m
Reflector Dimensions:
603 lx
3m
0110.50
Percent(%)
100
35.00
Side
021.50
80
60
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60 -40
-20
0
Degree
20
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
4
13RFEL130001 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot light
Spot beam angle
Decorative Lighting
AR111 look
AR111
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
4820 lx
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
4820
27°
1m
92°
1205 lx
2m
Reflector Dimensions:
3m
0110.50
536 lx
Percent(%)
1100
35.00
Side
021.50
80
80
60
60
40
40
20
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
00
-100 -80
-100
-80
-60
-40
-60 -40
-20
-20
00
20
20
Degree
40
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
60
80 100
100
80
version : 1
5
13RFEL150001 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot light
Spot beam angle
Decorative Lighting
AR111 look
Down Light
AR111
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
2820
48°
2820 lx
96°
705 lx
2m
Reflector Dimensions:
313 lx
3m
0110.50
Percent(%)
100
35.00
Side
021.50
80
60
40
20
Bottom
0
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
-100
-80
-60 -40
-20
0
Degree
20
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
6
13RFEL118001 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot light
Narrow beam angle
Decorative Lighting
Compatible luminous opening of PAR38
PAR38
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
17100
17°
17100 lx
33°
4275 lx
2m
Reflector Dimensions:
1900 lx
3m
0105.00
56.50
Side
Percent(%)
100
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60 -40
-20
0
Degree
20
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
7
13RFEL130002 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot light
Spot beam angle
Decorative Lighting
Compatible luminous opening of PAR38
PAR38
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
8670
24°
8670 lx
68°
2168 lx
2m
Reflector Dimensions:
963 lx
3m
0105.00
56.50
Side
Percent(%)
100
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60 -40
-20
0
Degree
20
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
8
13RFEL145001 Specification
Specification
Features :
General Application :
Flood Light
Reflector material Al(1090)
Spot beam angle
General Lighting
Compatible luminous opening of PAR30
Decorative Lighting
DownLight
AR111
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
3720 lx
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
3720
45°
79°
930 lx
2m
Reflector Dimensions:
3m
088.00
413 lx
46.00
Side
021.50
Percent(%)
100
80
60
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60
-40
-20
0
20
Degree
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
9
13RFEL125002 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot Light
Spot beam angle
Decorative Lighting
Compatible luminous opening of PAR30
PAR30
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
10960 lx
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
10960
20°
53°
2740 lx
2m
Reflector Dimensions:
3m
088.00
1218 lx
100
Percent(%)
45.00
Side
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60
-40
-20
0
20
Degree
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
10
13RFEL120002 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
Spot Light
Spot beam angle
Decorative Lighting
Track Light
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
17580 lx
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
17580
18°
36°
4395 lx
2m
Reflector Dimensions:
3m
074.00
1953 lx
41.30
Side
Percent(%)
100
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60
-40
-20
0
20
Degree
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
11
13RFEL135002 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
General Lighting
Flood beam angle
Decorative Lighting
Down Light
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
5730 lx
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
5730
34°
1433 lx
71°
2m
Reflector Dimensions:
3m
637 lx
075.00
40.70
Side
Percent(%)
100
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60
-40
-20
0
20
Degree
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
12
13RFEL150002 Specification
Specification
Features :
General Application :
Reflector material Al(1090)
General Lighting
Flood beam angle
Decorative Lighting
Down Light
Application Note
Operating temperature -40oC ~ +70oC (Upper limit +80oC)
Apply with HM30
Never use any commercial solvents on reflectors
Equipped with adaptive ring and protective cover of HM30
Emitter Type
3500 lx
1m
Typical Lux @1M Beam angle Field angle
2PHM30CW27P13001
3500
47°
875 lx
78°
2m
Reflector Dimensions:
3m
389 lx
075.00
40.70
Side
Percent(%)
100
80
60
021.50
40
20
Bottom
Notes:
1. Unit : mm
2. Tolerance : ± 0.3mm
0
-100
-80
-60
-40
-20
0
20
Degree
40
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
60
80
100
version : 1
13
Package Information
The shipping label on the carton specifies the company name, the part number, product quantity,
telephone number, fax number and address.
Every reflector should be packed with one plastic bag and place into the box. Every carton contains
several boxes. Please refer to the following table for detailed specification.
Diameter
Box Size and package number
Carton size and package number
Total
71<Diameter≦87
100*100*330, total 100 pcs/box
450*220*360, 8 box/carton
800 pcs/carton
87<Diameter≦101
100*100*390, total 67 pcs/box
540*340*420, 15 box/carton
1000 pcs/carton
101<Diameter≦110
125*125*310, total 42 pcs/box
570*440*340, 12 box/carton
500 pcs/carton
110<Diameter≦126
125*125*400, total 75 pcs/box
650*410*430, 8 box/carton
600 pcs/carton
Reflector
Plastic bag
Box
Carton
Note:
All dimensions are in mm
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 1
14
Revision History
Version
Description
Release Date
1
Establish Order Code Information
2015/05/15
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced
in LDMS. LDMS is an integrated program derived from the four essential technologies in LED
lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical
Optimization, to provide customer with various LED components and modules. More Information
about the company and our products can be found at www.edison-opto.com
Copyright©2015 Edison Opto. All rights reserved. No
part of publication may be reproduced or transmitted
in any form or by any means, electronic or mechanical,
including photo copy, recording or any other
information storage and retrieval system, without
prior permission in writing from the publisher. The
information in this publication are subject to change
without notice.
www.edison-opto.com
For general assistance please contact:
[email protected]
For technical assistance please contact:
[email protected]
Copyright © 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice.
www.edison-opto.com
version : 1
15