Wastewater Specialty Catalog 2002-2003

Transcription

Wastewater Specialty Catalog
2002/2003
Milan Engineered Systems, a division of Milan Supply Company, has built its
reputation with quality products, competitive prices, and dedication to
outstanding service.
Product lines that encompass Wastewater Pumps and accessories,
Control Panels, Wastewater Treatment Systems and Disposal Field
accessories, point to our commitment to the industry.
Milan Engineered Systems participates in ongoing education, has a concern
for the public health and the preservation of the environment.
Contact Milan for your wastewater system needs.
Location
Bay City
Cadillac
Grayling
Howell
Indian River
Mt. Pleasant
Sparta
Traverse City
Address
3566 N. Euclid Street
7877 Mackinaw Trail
4603 Hanson Street
4950 Mason Rd.
6031 S. Straits Highway
7125 E. Pickard
9680 Sparta Avenue
6986 US31 S.
Phone Number
1•989•684•5873
1•231•775•5832
1•989•348•8832
1•517•552•1702
1•231•238•9200
1•989•773•9100
1•616•887•5212
1•231•276•9282
Fax Number
1•989•684•7780
1•231•775•1467
1•989•348•7605
1•517•552•1706
1•231•238•9776
1•989•772•3415
1•616•887•2555
1•231•276•6147
Table of Contents
Biotube Effluent Filters
Ssptic Tank Effluent Pumping Systems
Orenco Systems Pump Basins
Goulds Pumps
Myers Pumps
Controls & Floats
Pump Accessories
Alarms & Float Charts
Valves
Disposal Field Accessories
Septic Tank & Accessories
PVC Pipe and Fittings Sch 40
PVC Sewer Pipe & Fittings
Tank Access Risers
AdvanTexTM & Infiltrator
"Assisting the Designer
and Contractor"
3
4
5
6-7
8-9
10
11
12
13
14
15
16
17
18
19
Service Capabilities
•
•
•
•
•
Indian River
Milan
Supply
Branches
Traverse City
Grayling
Project Take-off
Application Review
Equipment Orientation
System Start up
System Assistance
Cadillac
System Specialists
Mt. Pleasant
Bay City
Sparta
Howell
•
•
•
•
•
Effluent & Sewage Lift Systems
OSI Sand Filters (ISF, RSF)
OSI AdvanTexTM
Aerobic Treatment Units
High Strength Waste Treatment
"Michigan’s Most Diversified Supplier to the Wastewater Market."
Biotube Effluent Filters
How It Works
Effluent from the relatively clear
zone of the septic tank, between
the scum and the sludge layers,
enters the Boitube® Effluent Filter
through its inlet holes.Effluent then
enters the space between the
housing and Boitubes, utilizing the
entire screen surface for filtering.
Particles larger than 1/8” are
detained in the interior space,
where continued decomposition of
organic material occurs.
Once the effluent has been
filtered through the biotubes, it
flows through the modulating
orifices at the outlet of the filter.
If inflow becomes temporarily
excessive, the fluid level in the
tank will rise as the modulating
orifices slow the flow through the
tank, allowing maximum settling of
solids.
Pure Performance
Sizes and Applications
The OSI Biotube Effluent filter is the most advanced in the
industry, engineered to provide maximum protection for your
septic system
4” Diameter
Best for most residential
applications
Features and Benefits
6” and 8” Diameter
• Improves effluent quality.
Average Total Suspended
Solids (TSS) is less than
30 PPM, nearly 2 1/2 times
lower than a non screened
system!
Ideal for larger residential
applications, such as large
homes or duplexes, or for
small commercial flows.
• Allows for a smaller
diameter drainfield pipe.
Lowers drainfield material
costs.
For larger commercial
flows. Multiple filters may
be used to accommodate
larger flows.
12” and 15” Diameter
Excellent for:
• Superior patented design.
Extends drainfield life.
Reliable, corrosion-proof
construction.
• Gravity Septic Tank Filters
• Effluent Pumping Systems
• Dosing Siphon System
• Easy installation. Installs
in minutes in new or
existing tanks.
• Available alarm. Indicates
when maintenance is
needed.
OSI Biotube Effluent Filters are
available in several diameters,
suitable, suitable for a variety
of applications.
8” and 4” models shown
• Grease Trap Filters
• Industrial Process Filtering
• Groundwater Remediation
Source
2 or 3 bdrm single family homes
4 bdrm or larger homes
• Ideal for variable-grade
sewers. Allows reduction
of the transport line size
and associated costs.
• Custom sizes.
Call Milan Engineered Systems for your
custom filter needs!
3
Recommended Filters
FT0444-36
FT0444-36, FT0654-36
FT0854-36
1000 gallons per day
FT0854-36, FT1254-36
FT1254-36, FT1554-36
FT1254-36, FT1554-36
FT1554-36
FT1554-36
10,000 gallons perday or more
Multiple filters
Use multiple filters or deeper versions of standard filters to
achieve desired screen area as an option at any flow.
Many situations require special designs; modifications of
standard filter dimensions are accommodated easily.
Septic Tank Effluent Pumping Systems & Related Products
High head
Pump System
Orenco’s Septic Tank Effluent
Pumping System (STEP System) is used for
pumping effluent from single or double
compartment septic tanks and dosing tanks.
Patented Biotube® vault technology filters
out solids so that only liquid from the “clear
zone” between the tank’s scum and sludge
layer is pumped. This reduces biological
Septic Tank
or
Pump Tank
loading and clogging of downstream
components. All systems are pre-assembled
with
corrosion
resistant,
durable
components, ensuring reliability.
Low head
Pump System
Septic Tank Effluent Pump System
S.T.E.P. Package
• Riser Assembly
• Lid
• Riser
• Splice Box
• Adapter
• Bolts
• Epoxy
• Biotube®
Screened Pump Vault
• Pump, Piping Assembly
• Control, Float Assembly
• 5 Year Warranty
Septic Tank
or
Pump Tank
4
OSI Pump Basins
Orenco’s Pump Basins are used as secondary pump chambers and lift stations in septic
systems. Constructed of PVC pipe with fiberglass base and lid. A 4” inlet elbow and holes to
accommodate splice boxes and discharge piping are located and sized for each application.
Available in 18”, 24” and 30” diameters in standard 6” length increments. Custom lengths available in
1” increments.
Liquid Capacities
24” Dia. — 1.88 Gal. /
Inch
30” Dia. — 2.96 Gal. /
Inch
Pump Basin
Septic Tank Draw Down / Gallons per Inch
Tank Width
5
5.25
5.5
5.75
6
6.25
6.5
6.75
7
7.25
7.5
7.75
8
4
4.5
5
5.5
6
6.5
12.46
13.08
13.71
14.33
14.95
15.58
16.20
16.82
17.45
18.07
18.69
19.32
19.94
14.02
14.72
15.42
16.12
16.82
17.52
18.23
18.93
19.63
20.33
21.03
21.73
22.43
15.58
16.36
17.13
18.91
18.69
19.47
20.25
21.03
21.81
22.59
23.37
24.14
24.92
17.13
18.99
18.85
19.71
20.56
21.42
22.28
23.13
23.99
24.85
25.70
26.56
27.42
18.69
19.63
20.56
21.50
22.43
23.37
24.30
25.23
26.17
27.10
28.04
28.97
29.91
20.25
21.26
22.28
23.29
24.30
25.31
26.33
27.34
28.35
29.36
30.38
31.39
32.40
Tank Length
7
7.5
21.81
22.90
23.99
25.08
26.17
27.26
28.35
29.44
30.53
31.62
32.71
33.80
34.89
23.37
24.53
25.70
26.87
28.04
29.21
30.38
31.54
32.71
33.88
35.05
36.22
37.39
8
8.5
9
9.5
10
24.92
26.17
27.42
28.66
29.91
31.15
32.40
33.65
34.89
36.14
37.39
38.63
39.88
26.48
27.81
29.13
30.45
31.78
33.10
34.43
35.75
37.07
38.40
39.72
41.05
42.37
28.04
29.44
30.84
32.24
33.65
35.05
36.45
37.85
39.25
40.66
42.05
43.46
44.86
29.60
31.08
32.56
34.04
35.52
37.00
38.48
39.96
41.44
42.91
44.39
45.87
47.35
31.15
32.71
34.27
35.83
37.39
38.94
40.50
42.06
43.62
45.17
46.73
48.29
49.85
Inside Dimensions
Flow in GPM for Various Size Orifices
Orifice
Diameter
2’ Head
3’ Head
4’ Head
5’ Head
6’ Head
7’ Head
8’ Head
1/8”
5/32”
3/16”
7/32”
1/4”
0.273
0.427
0.615
0.837
1.094
.335
0.523
0.753
1.026
1.340
0.386
0.604
0.870
1.184
1.548
0.432
0.675
0.643
1.324
1.730
0.473
0.740
1.066
1.451
1.895
0.511
0.799
1.151
1.567
2.047
0.547
0.854
1.231
1.675
2.188
5
About Goulds...
Founded in 1848 in Seneca Falls NY, Goulds Pumps,
Inc. has been a leader in the manufacture and marketing of
high quality pumps for diverse industries.
The company has offices, warehouses , and
manufacturing facilities worldwide, conducting business in
over 100 countries in the Americas, Europe, Africa, the
middle East and Asia Pacific.
The company operates in two distinct market sectors:
Industrial and Water technologies. In the United States,
industrial and water technologies products are
manufactured in several locations and sold worldwide.
Double suction, multi stage, slurry and process pumps,
turbine, line shaft, submersible, jet, sump and sewage
products, and centrifugal products are produced in facilities
in New York, Pennsylvania, California, and Texas. An
advance R&D facility supports these product offerings.
Foundries operate in three US locations. A network of PRO
(pump, repair & Overhaul) service centers can repair and
rebuild any brand of pump. Goulds Pumps Europe is
Headquartered in London, England and has sales,
manufacturing, warehouse, service and distributing
facilities throughout the British Isles, Europe, Africa and
the Middle East. Stainless steel products are produced
at high tech production and R&D facilities at Lowara
Pumps in Italy.
3871
3885
3885 Submersible Effluent Pump (3/4” Solids)
Order No.
HP
PH
Volts
Dis
WE0511H
1/2
1
115
2”
WE0512H
1/2
1
230
2”
WE0511HH
1/2
1
115
2”
WE0512HH
1/2
1
230
2”
WE0712H
3/4
1
230
2”
WE1012H
1
1
230
2”
WE1512H
1 1/2
1
230
2”
WE1512HH
1 1/2
1
230
2”
3871 Submersible Effluent Pump (3/4” Solids)
Order No.
HP
PH
Volts
Dis
EP0411A
4/10
1
115 1 1/2”
EP0511A
1/2
1
115 1 1/2"
6
3872
3886
3872 Sewage Pump (2” Solids)
Order No.
HP
PH
Volts Dis.
WW0511
1/2
1
115
2”
Order No.
WS0511B
WS0512B
Economy Sewage Pump
HP
PH
Volts Dis.
1/2
1
115
2”
1/2
1
230
2”
3888
3887
Order No.
HP
PH Volts Dis.
WS0511BF
1/2
1
115
2”
WS0512BF
1/2
1
115
2”
WS0712BF
3/4
1
230
2”
WS1012BF
1
1
230
2”
WS1512BHF
1 1/2
1
230
2”
WS2012BHF
2
1
230
2”
3888D3, D4 Sewage Pump (3” Solids)
Order No.
HP
PH
Volts Dis.
WS1512D3, D4 1 1/2
1
230
3”
WS2012D3, D4
2
1
230
3”
WS3012D3, D4
3
1
230
3”
WS5012D3, D4
5
1
230
3”
Additional Voltage, Phase, Models
Available
Additional Models Available - Contact Milan Engineered Systems for your specific needs
7
Where Innovation Meets
Tradition
SSM33
Performance Curve
Founded in 1870, Myers offers product lines
which are supported by a long-standing reputation
of quality and reliability.
More than 600 employees, dedicated to quality
and service, utilize state-of-the-art technology and
process
to
make
Myers
a
world-class
manufacturer. Many of these people are second
and third generation Myers Employees, assuring
that
high
levels
of
experience,
care
and
craftsmanship go into each pump we build.
ME40
SSM33 Submersible / Effluent Pump
Order No.
HP
PH Volts Config Discharge
SSM33P-1
1/3
1
115
Auto
1 1/2”
ME
Performance Curve
Performance Curve
ME40 Effluent / Drain Water Pump
Order No.
HP
PH Volts Config Discharge
ME40AC-11 4/10
1
115
Auto
1 1/2”
ME40M-11 4/10
1
115 Manual
1 1/2”
ME40P-1
4/10
1
115 Auto Pig
1 1/2
8
ME Series Effluent Pump
Order No.
HP
PH Volts Max Sol. Discharge
ME50S-11
1/2
1
115
3/4”
2”
ME50S-21
1/2
1
230
3/4”
2”
ME75S-21
3/4
1
200
3/4”
2”
ME100S-21
1
1
230
3/4”
2”
ME150S-21 1 1/2
1
230
3/4”
2”
SRM4
CMV5
Performance Curve
Order No.
SRM4P-1
SRM4PC-2
HP
4/10
4/10
Performance Curve
SRM4 Sewage Pump
1
115
2”
2”
1
230
2”
2”
Order No.
CMV5A-11
HP
1/2
CMV5 Sewage Pump
1
115
2”
2”
MW
MW50
Performance Curve
Order No.
MW50-11
MW50-21
HP
1/2
1/2
Performance Curve
MW50 Sewage Pump
1
115
2”
2”
1
230
2”
2”
MW Series Single Seal Sewage Pump
Order No.
HP
MWH50-21 1/2
1
230
2”
2”
MW100-21
1
1
230
2”
2”
MW150-21 1 1/2
1
230
2”
2”
MW200-21
2
1
230
2”
2”
Single Phase Motor Maximum Cable Length
(motor to service enterance) (2)
Motor Rating
Volts
115
230
HP
1/3
1/2
1/3
1/2
3/4
1
1.5
2
3
5
Copper Wire Size (1)
14
130
100
550
400
300
250
190
150
120
0
12
210
160
880
650
480
400
310
250
190
110
10
340
250
1390
1020
760
630
480
390
300
180
8
540
390
2190
1610
1200
990
770
620
470
280
6
840
620
3400
2510
1870
1540
1200
970
750
450
9
4
1300
960
5250
3880
2890
2380
1870
1530
1190
710
2
1960
1460
7960
5880
4370
3610
2850
2360
1850
1110
0
2810
2160
11770
8720
6470
5360
4280
3620
2890
1740
00
3540
2630
7870
6520
5240
4480
3610
2170
Controls and Floats
Simplex Control Panels, “S” Series
Simplex Control Panels can be used for pressure sewer (STEP) systems, onsite treatment systems,
and pump control into conventional gravity or pressurized drainfields. “S” series pump control
panels are the best choice for a simplex pump and alarm system. These panels include a motor
contractor, which increases system life by reducing the load requirements on the float switches.
“S” series panels also allow options such as a programmable timer or use of larger horsepower
pumps.
MVP Simplex Control Panels, “MVP-S” Series
MVP Simplex Control Panels are especialy suited for timed dosing in single pump systems. All
MVP’s include an easy-to-use, programmable logic unit that incorporates many timing and logic
functions, such as multiple timing intervals to adjust for changing flow conditions. “MVP-S” panels
offer several functions as standard, including the sbility to use one float switch type for all functions,
elapsed time meters, and digital indication of float switch status.
Sand Filter Control Panels, “SSF” Series
Sand Filter Control Panels can be used to control two pumps in a sand filter treatment system.
“SSF” control panels use motor contractors to activate the pumps, (instead of float switches, as in
ASF panels). This allows more flexibility in drawdowns and allows for more options. Interlocked
controls prevent the septic tank pump from running if a high level condition occures in the sand
filter. “SSF” series panels also allow for options such as a programmable timer for use of larger
horsepower pumps.
Duplex Control Panels, “DAX” Series
Duplex Control Panels can be used in pressure sewer and onsite treatment systems that require
the use of two alternating pumps. The pair of pumps can be wired for both “lead” and “lag”
operation; a built-in alternating relay switches the “lead” and “lag” positions each pump cycle.
Float Switch Assemblies
Model
Signal
Drawdown
Milan Code
MFA
MFB
MFT
MFG
N.O.
N.O.
N.C.
N.C.
1”
4”
1”
4”
SEW20510
SEW20530
SEW20554
SEW20552
Simplex Dosing Panel
• Two Year Warranty
• NEMA 4X enclosure
• Alarm Beacon, horn (85db)
test/normal/silence switch • Control/alarm fuse • UL Approved • Large, easy-to-use terminal
blocks • Locking latch • Event counter • 120VAC control/alarm circuit • HOA (hand/off/auto)
switch • Circuit breaker pump protection • Magnetic motor contactor • Rated up to 20FLA (full
load amps)
Model
Floats
MFG Part No.
Milan No.
MES-2 Dose Panel
MES-3 Dose Panel
2
3
CP208
CP208E
SEW10015
SEW10020
Pumpmaster®
Double Float
Prod No.
HP Volt Milan No.
15PMD1WP 1/2 115 SEW10080
15PMD2WP 1 230 SEW10085
Pumpmaster Plus®
Prod No.
HP
15PMPD1WP 3/4
15PMPD2WP 2
Prod No.
HP
15DFD1WP 1
15DFD2WP 2
Volt Milan No.
115 SEW10120
230 SEW10125
Cable Weight
Sensor Float
Volt Milan No.
115 SEW10100
230 SEW10105
Prod No.
15PPCNO
Ft
30
10
Volt Milan No.
115 SEW10139
Prod No.
Cable Weight
Milan No.
SEW10190
Pump Accessories
Pump Basins
Model
SF22A
SF30
SF24X36
SF30X36
36X36M
Dimensions
18X24
18X30
24X36
30X36
36X36
Capacity
22.5 Gallons
30 Gallons
72 Gallons
110 Gallons
157.5 Gallons
Lids
SF44
SF114
SF24 Split
JC30DF
JC36DI
Access Doors
Type:
Loading:
Frame:
Material:
Type:
Loading:
Frame:
Material:
Sizes
APS (single leaf)
Pedestrian 150lbs. / 300lbs.
24x24
24x30
24x36
Angle non-watertight / watertight
Aluminum; Steel;
Stainless Steel
30x30
30x38
30x48
36x36
36x48
42x42
Sizes
APD (double leaf)
Pedestrian 150lbs. / 300lbs.
30x48
30x54
36x48
Angle non-watertight / watertight
Aluminum; Steel;
Stainless Steel
36x60
42x48
48x48
48x54
48x72
60x60
Guide rails
Economy Guide Rail
“EZ-Out”
1 1/4” SPDS5
(1 1/4” Brass) 3/4” Guide Rail*
1 1/2” SPDS6
(1 1/2” Brass) 3/4” Guide Rail*
2”
SPDS8
(2” Brass)
3/4” Guide Rail*
3”
SPDS360B
(3” Brass) 1 1/4” Guide Rail*
1 1/4” System
1 1/2” System
2” System
3” System
*Not Supplied
SGR125-96 (1 1/4” System)
SGR200-96 (2” System)
Priced Per System
Stainless*
Stainless*
*Complete
Valves
A. Ball Valve (slip x slip)
A.
Size
3/4”
1”
1 1/4”
1 1/2”
2”
3”
Code
VAL02306
VAL02308
VAL02310
VAL02512
VAL02316
VAL02318
Size
1”
1 1/4”
1 1/2”
2”
Code
SEW22240
SEW22250
SEW22260
SEW22270
C. Swing Check Valve (compression)
B.
Size
1 1/4”
1 1/2”
2”
3”
C.
A. Ball Valve (threaded)
Size
3/4”
1”
1 1/4”
Code
VAL025807
VAL25812
VAL25812
D.
11
B. Swing Check Valve (slip x slip)
Code
SEW13005
SEW13010
SEW13015
SEW13020
D. Ball Check Valve (Cast Iron threaded)
Size
1 1/4”
1 1/2”
2”
Code
SEW13025
SEW13030
SEW13035
Alarms
Tank Alert ® 1
Tank Alert ® XT
The Tank Alert 1
alarm can serve as
a high or low level
alarm.
The Tank Alert XT
alarm can serve as
a high or low level
alarm.
NEMA 1 enclosure
Indoor use
Type 3R enclosure
Indoor/Outdoor
use
SEW10145
SEW10144
Floats
Simplex Float Arrangements
One Float
(Pump or Alarm)
Fig. 1
Two Float
(Pump Differential)
Three Float
Two Float
(Pump Differential & Alarm)
(Pump & Alarm)
Fig. 4
Fig. 3
Fig. 2
Duplex Float Arrangements
Three Float
Four Float
(Pump & Alarm)
Five Float
(Pump & Alarm)
(Pump & Alarm)
Alarm
Lag Pump On
Alarm
LAG Pump On + Alarm
Lag Pump On
Lead Pump On
Lead Pump On
Lead Pump On
Off
Off
Off
Redundant Off
Fig. 6
Fig. 5
Fig. 7
Friction Head Losses for Fittings (equivalent feet of piping)
Nominal
Pipe Dia.
90o
Elbow
45o
Elbow
Tee
Tee
(Thru-Flow)
(Branch Flow)
Swing
Check Valve
Gate
Valve (open)
1.25”
1.5”
2”
2.5”
3”
3.5
4.0
5.2
6.2
7.7
1.8
2.2
2.8
3.3
4.1
2.3
2.7
3.5
4.1
5.1
6.9
8.1
10.3
12.3
15.3
11.5
13.4
17.2
20.6
25.5
.9
1.1
1.4
1.7
2.0
12
Valves
PVC Gate Valves (Pressure Rated)
This proven design is suited for a variety of applications featuring multiple end
connector options.
Available in 1/2”-4” sizes
PVC Gate Valves
Pvc sliding Gates Valves are used as an inexpensive valve for quick shut off.
Constructed with PVC and 416 stainless steel, with slip connection.
Available in 4”, S x S (slip on both ends)
Flushing Valve
Flushing Valve cleanout and enclosure allows easy access for maintenance of
laterals and monitoring of system. PVC Sweep Ell, Ball valve, and Valve Box.
Flushing Valve available in 3/4”-2”
Valve Enclosure available in 7” & 10”
Orifice Shield
Orifice Shields are used in a pressurized distribution system to protect the orifices
from backfill debris that might cause orifice blockage.
Available in 3/4”, 1”, 1 1/4”, 1 1/2”, 2”
4000
6000
Pressure Loss - 4 Outlet Valve
Flow (GPM)
10
20
PSI Loss
2.0 3.0
30
4.5
Flow (GPM
10
20
PSI Loss
2.0 4.5
30
7.5
40
6.4
Flow (GPM)
20
40
PSI Loss
2.5 3.5
60
5.0
80
7.5
100
10.0
Flow (GPM
20
40
PSI Loss
3.0 4.0
60
6.0
80
9.0
100
11.0
Pressure Rating
25-75 PSI
4 Outlet Models have interchangeable Cams for 2 - 4
Zone Operation. 6402 - 6404
6 Outlet Models have interchangeable Cams for 2 - 6
Zone Operation. 6602 - 6606
Pressure Rating
25-75 PSI
4 Outlet Models have interchangeable Cams
for 2 - 4 Zone Operation. 4402 - 4404
6 Outlet Models have interchangeable Cams
for 2 - 6 Zone Operation. 4602 - 4606
Divert Paddle Valve
Recover that failed drainfield
When dual drainfields are constructed from the onset and alternated periodically, the life span of the
two will be greater than twice that of two drainfields used to points of failure consecutively.
Divert Paddle Valve
SEW13070
The Bull Run® Valve
is designed to split flows to septic fields or systems. The Bull Run Valve is available in 4" Sch 40 PVC.
and is suitable wherever septic disposal systems are used - in commercial, industrial and residential
applications.
4” Bull Run Valve
SEW13065
Specialty NonStock Valves Available
Consult with Milan Engineered Systems on
application and availability
13
Disposal Field Accessories
Drop Box
Part
Drop
DB02 w/ lid
DB04 w/ lid
DB06 w/ lid
B1 Riser
Order No.
Zoeller
Distribution Box
Distribution
Box
Part
Order No.
9HD2
10” Valve Box
10” Round Valve Box
SEW16210
Filter Fabric
2”
SEW16000
4”
SEW16001
6”
SEW16002
11" x 11" x 15 1/2" Tall
6” Tall
SEW16003
11" x 11" x 6" Tall
Part
SEW16095
7” Round Valve Box
SEW16200
Order No.
54”x100’
36" X 300'
36" X 1500'
72" X 300'
72" X 1500'
Red Rosin
Paper 20#
SEW21750
SEW21752
SEW21754
SEW21756
SEW21758
Order No.
Fluid Volume in Pipe
Minimum Solids Flow (2’/sec.)
Pipe Size
Minimum GPM
Pipe Size
Volume
1 1/4”
1 1/2”
2”
3”
4”
6”
8”
10”
9
13
21
46
80
180
325
500
1 1/4”
1 1/2”
2”
3”
4”
6”
8”
10”
.06
.09
.16
.36
.625
1.4
2.6
4.07
Friction Head Losses for Pipe — Per 100 Feet of Piping
1.25” Dia.
1.5”
2”
2.5”
GPM
Plastic
Steel*
4
6
8
10
12
14
16
18
20
25
30
35
40
45
50
60
70
80
90
100
125
150
175
.34
.71
1.19
1.78
2.48
3.29
4.21
5.25
6.42
10.39
13.6
19.2
.35
.72
1.20
1.74
2.45
3.24
4.15
5.17
6.31
9.61
13.0
18.2
SEW21774
A permeable membrane
that prevents migration of
media from one layer to
another.
TRU FLOW SEW16150
7” Valve Box
Size
Plastic
Steel*
.33
.56
.83
1.16
1.54
1.97
2.41
2.96
4.80
6.27
8.82
10.70
14.0
16.5
.34
.57
.85
1.18
1.51
1.93
2.40
2.92
4.80
6.23
8.82
10.80
14.0
16.5
Plastic
Steel*
.34
.45
.58
.72
.88
1.38
1.81
2.40
3.12
3.8
4.7
6.5
8.6
11.1
13.8
16.8
.35
.46
.59
.73
.88
1.39
1.82
2.40
3.10
3.8
4.7
6.6
8.8
11.4
14.3
17.5
14
Plastic
Steel*
.75
1.01
1.28
1.5
1.9
2.7
3.7
4.7
5.8
7.1
10.9
15.9
.77
.99
1.30
1.6
1.9
2.7
3.6
4.6
5.8
7.1
10.9
15.9
3”
Plastic
Steel*
.55
.66
.94
1.2
1.6
2.0
2.4
3.7
5.2
6.9
.56
.68
.91
1.2
1.6
2.0
2.4
3.6
5.1
6.9
Septic Tanks and Accessories
N12
Poly Septic Tanks
Polyeptic Tanks
Single Compartment
300 Gal
500 Gal
1000 Gal
SEW96000
SEW96020
SEW96040
2 Compartment
1000 Gal
SEW96050
• Additional Sizes Available
• 6” & 12” Risers in Stock
Zabel Effluent Filters
A-1801
A-100
A-300
N12 24” Corrigated Smooth Interior Pipe
• Great for Septic Tank Risers
• Storm Water Management
• Durable - Resists Salts, Abrasive
Chemicals, & Aggresive Chemicals
SEW15005
SEW15010
SEW15015
Orenco Effluent Filters
Fractional Equivalents
4”x36”
4”X44”
8”X48”
12”X54”
15”X54”
BIOTUBE
BIOTUBE
BIOTUBE
BIOTUBE
BIOTUBE
SEW22158
SEW22160
SEW22180
SEW22185
SEW22187
Corrugated Drainage Pipe
Coiled Plastic Drain Pipe
4” x 150’ Solid
SEW94510
4” x 150’ Slotted
SEW94500
4” x 150’ Slotted w/Sock SEW94505
Coiled Plastic Fittings
4”
4”
4”
4”
4”
Corrugated Plug
Corrugated Coupling
Corrugated Wye
Corrugated Tee
Corrugated 90° Ell
SEW94521
SEW94515
SEW94520
SEW94522
SEW94526
15
PVC Pipe and Fittings (Pressure)
Size
.75”
1”
1.25”
1.5”
2”
Size
1”
1.25”
1.5”
2”
3”
4”
Part No.
PVC02005
PVC02010
PVC02015
PVC02020
PVC02025
PVC02035
PVC02040
Part No.
PVC07015
PVC07020
PVC07025
PVC07030
PVC07035
PVC07045
PVC07050
Part No.
PVC07508
PVC07510
PVC07512
PVC07516
PVC07524
PVC07532
Part No.
PVC03030
PVC03050
PVC03060
PVC03080
PVC03090
PVC03100
PVC03110
PVC03120
PVC03130
PVC03140
PVC03205
PVC03210
PVC03220
PVC03280
PVC03300
(slip x slip)
Size
.75”
1”
1.25”
1.5”
2”
3”
4”
Part No.
PVC08015
PVC08020
PVC08025
PVC08030
PVC08035
PVC08045
PVC08050
Elbow 45°
Size
.75”
1”
1.25”
1.5”
2”
3”
4”
Union
Size
.75”
1”
1.25”
1.5”
2”
Size
75”
1”
1.25”
1.5”
2”
3”
4”
Elbow 90°
Bushing
Size
1” x .75”
1.25” x .75”
1.25” x 1”
1.5” x .75”
1.5” x 1”
1.5” x 1.25”
2” x .75”
2” x 1”
2” x 1.25”
2” x 1.5”
3” x 1”
3” x 1.25”
3” x 1.5”
4” x 2”
4” x 3”
Part No.
PVC11895
PVC11900
PVC11902
PVC11905
PVC11920
Cross
Female Adapter
Size
.75”
1”
1.25”
1.5”
2”
3”
4”
Coupling
Plug
Male
SizeAdapter
Part No.
.75” PVC01502
1”
PVC01505
1.25” PVC01515
1.5” PVC01520
2”
PVC01525
3”
PVC01535
Part No.
PVC11505
PVC11510
PVC11515
PVC11520
PVC11525
PVC11535
PVC11540
Tee
Part No.
PVC16045
PVC16050
PVC16055
PVC16060
PVC16065
Size
.75”
1”
1.25”
1.5”
2”
3”
4”
Part No.
PVC12020
PVC12030
PVC12040
PVC12050
PVC12060
PVC12080
PVC12090
PVC Pipe & Acc.
PVC Pipe SDR 21 Class 200
PVC 00675
PVC 00680
PVC 00720
PVC 00735
PVC 00738
0.75” x 20’ Belled end
1” x 20’
1.25” x 20’
1.5” x 20’
2” x 20’
PVC Pipe Schedule 40 10’ length
PVC 00755
PVC 00760
PVC 00765
PVC 00770
1.5” x 10’
2” x 10’
3” x 10’
4” x 10’
PVC 00200
PVC 00210
PVC 00215
PVC 00225
PVC 00252
PVC 00330
PVC 00420
0.75” x 20’
1” x 20’
1.25” x 20’
1.5” x 20’
2” x 20’
3” x 20’
4” x 20’
PVD 00010
PVD 00012
PVD 00016
PVD 00024
PVD 00032
1.25” x 20’
1.5” x 20’
2” x 20’
3” x 20’
4” x 20’
PVC Glue & PVC Primer
Cap
FIPT
Size
.75”
1”
1.25”
1.5”
2”
4”
Part No.
PVC06015
PVC06020
PVC06025
PVC06030
PVC06035
PVC06065
Socket
Size
.75”
1”
1.25”
1.5”
2”
3”
4”
Part No.
PVC05015
PVC05020
PVC05025
PVC05030
PVC05035
PVC05045
PVC05047
16
PVC 01005
PVC 01010
PVC 01017
PVC 01018
1 Pint
1 Qt
1 Pint
1 Qt
Glue
Glue
Glue
Glue
Rain & Shine Blue
Rain & Shine Blue
All Weather Clear
All Weather Clear
PVC 01025
PVC 01030
PVC 01055
PVC 01060
1 Pint
1 Qt
1 Pint
1 Qt
Primer
Primer
Primer
Primer
Clear
Clear
Purple
Purple
PVC Pipe and Fittings (DWV and S&D)
PVC DWV
Sanitary Tee
(HxHxH)
SEW82628
SEW82636
SEW82646
SEW82654
SEW82660
Coupling (HxH)
SEW82143
SEW82145
SEW82149
SEW82155
SEW82161
1 1/2”
2”
3”
4”
6”
90° Ell (HxH)
SEW82257
SEW82259
SEW82261
SEW82263
SEW82267
45° Ell (HxH)
1 1/2”
2”
3”
4”
6”
SEW82472
SEW82474
SEW82476
SEW82478
SEW82480
22 1/2° Ell (HxH)
SEW82503
SEW82505
SEW82507
SEW82509
1 1/2”
2”
3”
4”
6”
1 1/2”
2”
3”
4”
6”
SEW83222
4”
Sewer & Drain
Sanitary Tee (HxHxH)
SEW94304
Coupling (HxH)
4”
SEW94129
90° Ell (HxH)
SEW94195
SEW94207
4”
6”
Female Adapter(FPTxS)
SEW82102
SEW82104
SEW82106
SEW82108
2”
3”
4”
6”
Adapter(cleanout) (spigitxfpt)
SEW82120
4”
4”
Sch40 - DWV Dual Rated
1 1/2” x 10’ Plain End
2” x 10’ Plain End
4” x 10’ Bell End
4” x 10’ Cell Core BEll
4” x 10’ SDR 35
SEW80000C
SEW80002C
SEW80004C
SEW80006C
SEW80008C
SEW80010C
SEW90000
Sewer & Drain
4” x 10’ Cresline Solid
4” x 10’ Cresline Perf.
4” x 10’ ADS Solid
4” x 10’ ADS Perf.
SEW92015C
SEW92010C
SEW92025
SEW92020
22 1/2° (HxH)
Cross (HxHxHxH)
SEW94195
4”
45° (HxH)
4”
SEW83410
SEW83412
PIPE
Wye (HxHxH)
1 1/2”
2”
3”
4”
Plug (MPT)
SEW94227
4”
4”
Cap (Slip)
SEW94345
Fernco Flexible Couplings
Plastic to Plastic
Size
2x2
4x3
4x4
6x4
6x6
Milan No.
F50006
F50024
F50010
F50028
F50014
Clay to CI/Plastic
Size
4x4
Milan No.
F50047
17
4”
Tank Access Risers
Lids
Orenco’s fiberglass lids provide a secure covering for access risers, supporting a 2,500 lb.
wheel load. Lids are molded with an attractive green finish and a textured non-skid top
surface. Note: Lids are not rated for vehicular traffic.
Diameter: 18”, 21”, 24”, 30”
2” Insulation Available for Lids
Risers
Risers provide access to septic tank openings and can be cast into the tops of concrete
tanks, bonded in place, or bolted down using a Riser Tank Adapter.
Diameter: 18”, 21”, 24”, 30”
Depth: 2’ thru 13’ Avail (one foot incriments)
Adapters
Orenco’s Tank Adapters are used to provide a structural, watertight method of installing an
access riser over a tank opening. Adapters can either be cast into the top of a concrete tank,
bonded to the top of a fiberglass tank, or fastened with a bolt-down kit.
Adapter Type
Tank Outlet Type and Size
Riser Diameter
PRTA24
Up to 24” round or 15” square
24”
RRFTA
21” or 24”
RRFTA30
30”
FRTA30
30”
Grade Ring Inserts
A Grade Ring is used to extend the height of an existing riser, pump basin, or sand filter
pump basin.
Diameter: 18”, 21”, 24”, 30”
Splice Box
Splice Boxes are used to safely house spliced wire connections. Boxes are available with 1 to
6 watertight cord grips.
Grommets
Pipe Grommets are used to provide a watertight seal at piping penetrations. All grommets
conform to standard IPS sizes.
G2
2”
SEW21360
G1
1”
SEW21330
G3
3”
SEW21370
G125 1 1/4” SEW21340
G4
4”
SEW21380
G150 1 1/2” SEW21350
Bolt Down Kits
RRFTABDKIT Bolt-Down Kit
Bolt-Down Kit includes butyl tape and concrete anchors.
RUBDKIT Bolt-Down Kit
Bolt-Down Kit includes three concrete anchors and three stainless steel hold-down straps to
attach Ultra-Rib risers to top of concrete tank.
Epoxy (adhesive)
ADH100 Adhesive
MA320 Adhesive: 2-Component
SEW21320
ADH10 Adhesive: 2-Component
Pint: SEW21300
18
Quart:SEW21310
Product Benefits
• Easy to install with no messy cleanup.
• Absolutely no stone required.
• Lightweight chambers can be hand carried to trench.
• Fast installation saves time and money.
• Infiltrator chambers have a 12-year success
rate of 99.5%.
• Greater infiltrative capacity means added protection
and peace of mind.
The Standard
Infiltrator® Chamber
The Equalizer® 36
Chamber
Equalizer 36 Nominal Chamber Specifications
Chamber Size (W x L x H)
22" x 101" x 13½"
Equalizer 36 Nominal Chamber Specifications
Chamber Size (W x L x H)
34" x 75" x 12"
AdvanTexTM
Treatment
Systems.
Our patented AdvanTexTM
Treatment System works just like
a recirculating packed bed filter –
a proven technology. But the
AdvanTexTM Treatment System
used a highly efficient, nonwoven textile material, instead of
sand or gravel, for the treatment
media.
AdvanTexTM textile treatment
systems produce effluent that
exceeds “secondary” treatment
standards. And because textile
can handle much higher loading
rates than sand or gravel media, textile filters are very compact units. So they cost less for singlefamily installations, require significantly less land area, and are easier to install than other packed
bed filters.
19
Milan Engineered Systems is known for the company we keep . . .
Pumps
•
•
•
•
Wastewater Treatment
Orenco
Myers
Goulds
Sta-Rite
•
•
•
Electrical Controls
Orenco
Bio Microbics
NCS
• Orenco
• SJE Rhombus
. . . and the products we carry
PVC Pipe & Fittings
• Sch 40 Pressure Pipe & Fittings
• DWV Pipe & Fittings
• Sewer & Drain Pipe & Fittings
Specialty Equipment
•
•
•
•
•
•
•
Infiltrator Leach Fields
Basins
Distribution Boxes
Guide Rail Systems
Automatic Siphons
Access Doors
Effluent Filters
Complete Systems
• Effluent Pump Systems
• Sewage Pump Systems
• Grinder Systems
Valves
• Gate
• Ball
• Paddle
• Hydrotek
• Bull Run
• Swing Check
• Ball Check
Contact Milan Engineered Systems for all your Wastewater Needs
P.O. Box 309
Mt. Pleasant, MI 48804-0309
Tele: 989•773•9100
Fax: 989•772•3415

Wastewater Specialty Catalog 2002-2003

Transcription

Similar documents

1030345AB-Price Book booklet.indd