Válvulas Pilotadas Por Aire

Transcription

Desde1963
Válvulas
Pilotadas
Proveedor Integral
de Soluciones para
Por
Aire
la Industria
Válvulas angulares 290/ 390
La mejor en su tipo, ideal para manejo de agua caliente, vapor y
fluidos viscosos o con sólidos en suspensión, fabricados en cuerpos
de acero Inoxidable 316L y Bronce.
4
8290 SERIES | Angle Body Piston Valves
Broad range of pressure operated valves for
air, water, steam, and light slurries
Bronze & stainless steel constructions
Sizes 3/8" through 2 1/2"
w w w. a s c o v a l v e . c o m
4
SERIES | 8290
4
8290 SERIES
...tough and packed with features
POSITION MONITORING (OPTIONAL)
•
•
•
•
Signaling box with dual mechanical or inductive contacts (shown)
Compact signaling unit for magnetic position detectors
Linear position indicator (HS4 Series)
50mm NC & 63mm through 125mm NC and NO
STANDARD VISUAL POSITION INDICATOR
With clear polypropylene cover on 63mm through
125mm (optional on 32mm & 50mm).
PISTON ACTUATOR
Rotates 360˚ to allow easy assembly
and positioning of pilot port.
ASCO PILOT VALVES
The industry standard for
reliability and durability in
all industrial environments.
(See back cover)
RUGGED WATERTIGHT ACTUATOR
Made from tough fiber composite
and protected with double o-ring seal.
ONE PIECE COLD ROLLED S.S. STEM
RELIABILITY
Smooth stem movements
guided by two oversized bearings.
Provides added strength and less resistance.
SPRING LOADED STEM SEAL
The FKM flouroelastomer wiper keeps
harmful grit away from the stem area. As
a backup, there are multiple-ribbed shearing
rings that provide a cleaning action in the
stem grooves. These rings provide a longer
life by preventing debris from reaching
the chevron packing.
STUFFING BOX
Externally sealed using a
flat embedded seal ring.
HIGH FLOW RATE
Optimization of the fluid flow path.
PTFE DISC SEAL
For bubble tight shutoff.
2
ANTI-WATER HAMMER
The fluid passes under
the disc resulting in
slower closure.
4
SERIES | 8290
The 8290 Angle Body Piston Valve is a 2-way direct acting valve available in a normally closed or normally open
construction. They have proven durability in handling aggressive fluids, such as steam, hot water, solvents, and
light slurries.
The 8290 Series is pressure operated with a straight-through design available with bronze or stainless steel
bodies built for demanding applications. There are many optional features including position indication and
proportional control.
8290 SERIES | ASSEMBLY CONFIGURATOR
ASCO has simplified the 8290 selection
process and added the ability to create
assemblies using pilot valves and position
indicators. After you have determined
your product requirements, you can easily
construct a catalog number by clicking on
each feature required and clicking on the
View Details button. A second screen
will then appear providing the product
catalog number, product specification,
and various drawings.
You can also enter an existing catalog
number that the configurator has created
before to decipher the specifications of
the catalog number. Type the configured
catalog number into the text box next
to the Enter Catalog Number button
(CAPs only). The configurator will automatically highlight the corresponding
features of the product.
In order to use the
online configurator go to:
www.ascovalve.com/8290Configurator
3
4
SERIES | 8290
Angle Body Multi-Purpose Valves
Air or Water Pilot Operated
Bronze or 316L Stainless Steel Bodies • 3/8" to 2 1/2" NPT
The 8290 Series consists of 2-way direct acting valves available in
normally closed or normally open constructions. Built for demanding
applications, these valves come in a straight-through body design
made of bronze or stainless steel. There are many optional features
including visual/electrical position indicator or a stroke limiter. The
8290 Series is suitable for the following applications:
• General Service (air, inert gas, water, oil, light slurries)
• Steam and Hot Water
Construction
Valve Parts in Contact with Fluids
32mm
50mm-125mm
Part
50mm-125mm Body
316L Stainless Steel
Bronze
Stem
431 Stainless Steel
431 Stainless Steel
Stuffing Box
Brass
303 Stainless Steel
Stuffing Box Seal
PTFE
PTFE Chevron
PTFE Chevron
Wiper Seal
FKM
FKM
FKM
Brass
PTFE
PTFE
PTFE
-
-
Disc
Disc Seal
Screw
For all optional AISI 316L Stainless Steel constructions, contact ASCO
Specifications
Ambient Temperature Range: 15˚F to 140˚F
(32˚F to 122˚F for proportional and water service)
Pilot Fluid Temperature Range: 15˚F to 140˚F
(32˚F to 122˚F for proportional and water service)
Maximum Viscosity: 2,700 SSU
For higher viscosity applications, please consult ASCO.
Alternate Valve Constructions
• Oxygen service, add suffix "N".
• Medium vacuum service up to 7 x 10-3 Torr, add suffix "VM".
• Visual Position Indicator for normally closed valve with 32mm or
50mm operator, add suffix “VI” (note: position indicator standard
on 63mm through 125mm operators).
• NET-INOX treatment (stainless steel valve body pickled in
nitric/hydrofluoric acid bath), add suffix “NI”.
See inside back cover for the following constructions:
• Signaling Box
• Compact Positioners for proportional control
• Linear Position Indicator
• Stroke Limiter
Visit www.ascovalve.com/8290Configurator to create an 8290 assembly that fits
your needs. Options include position indication, pilot valves, and other accessories.
4
1
NC
2
NO
4
SERIES | 8290
Specifications
Operating Pressure
Differential (psi)
Pipe
Size
(in)
Orifice
Size
(in)
Cv Flow
On-Off
Prop.
Normally Closed - Entry Under the Disc 3/8
3/8
2.3
-
Max.
Max.
Min.
Fluids
Steam
Max. Fluid
Temp.°F
32 mm Operator
Air or Water
Pilot Pressure
(psi)
Bronze
Stainless
Steel Min.
Max.
Approx.
Shipping
Weight
(lbs.)
0
240
150
366
-
8290A791
60
150
1.3
1/2
1/2
4.1
-
0
180
150
366
-
8290A792
60
150
1.4
3/4
3/4
7.6
-
0
90
90
366
-
8290A793
60
150
1.6
Normally Open - Entry Under the Disc
3/8
3/8
2.3
-
0
240
150
366
-
8290A794
I
150
1.3
1/2
1/2
4.1
-
0
240
150
366
-
8290A795
I
150
1.4
3/4
3/4
7.6
-
0
200
150
366
-
8290A796
I
150
1.6
Normally Closed - Entry Above the Disc for Rapid Cycling Steam Applications
3/8
3/8
2.3
-
0
-
150
366
-
8290A797
II 150
1.6
1/2
1/2
4.1
-
0
-
150
366
-
8290A798
II 150
1.4
3/4
3/4
7.6
-
0
-
150
366
-
8290A799
II 150
1.6
50 mm Operator
Normally Closed - Entry Under the Disc 1/2
1/2
5.7
5.3
0
240
150
366
8290A384
8290A393
60
150
2.7
3/4
3/4
11
8.3
0
150
150
366
8290A385
8290A394
60
150
2.9
1
1
15
-
0
90
90
366
8290A386
8290A395
60
150
3.7
1/2
1/2
5.7
-
0
240
150
366
8290A387
8290A396
III 150
2.7
3/4
3/4
11
-
0
240
150
366
8290A388
8290A397
III 150
2.9
1
1
15
-
0
240
150
366
8290A389
8290A398
III 150
3.7
Normally Closed - Entry Above the Disc for Rapid Cycling Steam Applications 1/2
1/2
5.7
0
150
366
8290A390
8290A399
IV 150
2.7
3/4
3/4
11
-
0
-
150
366
8290A391
8290A400
IV 150
2.9
1
1
15
-
0
-
150
366
8290A392
8290A401
IV 150
3.7
63 mm Operator
Normally Closed - Entry Under the Disc
1/2
1/2
5.7
-
0
240
150
366
8290B002
8290B045
38
150
3.6
3/4
3/4
11
8.3
0
240
150
366
8290B005
8290B048
60
150
3.9
1
1
19
17
0
150
150
366
8290B010
8290B053
60
150
4.7
1 1/4
1 1/4
32
24
0
90
90
366
8290A016
8290A059
60
150
6.0
1 1/2
1 1/2
52
33
0
60
60
366
8290A020
8290A063
60
150
8.0
2
2
68
46
0
40
40
366
8290A024
8290A067
60
150
10.0
1/2
1/2
5.7
-
0
240
150
366
8290B026
8290B069
V
150
3.6
3/4
3/4
11
-
0
240
150
366
8290B027
8290B070
V
150
3.9
1
1
19
-
0
240
150
366
8290B028
8290B071
V
150
4.7
1 1/4
1 1/4
32
-
0
240
150
366
8290A030
8290A073
V
150
6.0
1 1/2
1 1/2
52
-
0
160
150
366
8290A032
8290A075
V
150
8.0
2
2
68
-
0
105
105
366
8290A034
8290A077
V
150
10.0
1/2
1/2
5.7
-
0
-
150
366
8290B036
8290B079
VI 150
3.6
3/4
3/4
11
-
0
-
150
366
8290B037
8290B080
VI 150
3.9
1
1
19
-
0
-
150
366
8290B038
8290B081
VI 150
4.7
1 1/4
1 1/4
32
-
0
-
150
366
8290A039
8290A082
VI 150
6.0
1 1/2
1 1/2
52
-
0
-
150
366
8290A040
8290A083
VI 150
8.0
2
2
68
-
0
-
135
366
8290A042
8290A085
VI 150
10.0
Available with NET-INOX treatment, add suffix "NI"; Minimum pilot pressure varies, see identified graph for appropriate values;
For Visual Position Indicator add suffix "VI".
5
4
SERIES | 8290
Specifications
Pipe
Size
(in)
Orifice
Size
(in)
Operating Pressure
Differential (psi)
Cv Flow
On-Off
Max.
Prop.
Min.
Fluids
Max. Fluid
Temp.°F
Steam
90 mm Operator
1
1
19
17
0
240
1 1/4
1 1/4
32
24
0
180
1 1/2
1 1/2
52
33
0
120
2
2
68
46
0
90
1
1
19
0
240
1 1/4
1 1/4
32
0
240
1 1/2
1 1/2
52
0
240
2
2
68
0
200
1 1/4
1 1/4
32
0
1 1/2
1 1/2
52
0
2
2
68
0
1 1/4
1 1/4
34
1 1/2
1 1/2
56
2
2
77
2 1/2
2 1/2
130
1 1/4
1 1/4
34
1 1/2
1 1/2
56
2
2
77
2 1/2
2 1/2
130
Air or Water
Pilot Pressure
(psi) Bronze
Stainless
Steel Min.
Max.
Approx.
Shipping
Weight
(lbs.)
150
150
120
90
366
366
366
366
8290B011
8290A017
8290A021
8290A025
8290B054
8290A060
8290A064
8290A068
60
60
60
60
150
150
150
150
6.5
7.7
9.5
16.0
150
150
150
150
366
366
366
366
8290B029
8290A031
8290A033
8290A035
8290B072
8290A074
8290A076
8290A078
VII VII VII VII 150
150
150
150
6.5
7.7
9.5
16.0
150
366
150
366
150
366
125 mm Operator
8290A136
8290A041
8290A043
8290A137
8290A084
8290A086
VIII VIII VIII 150
150
150
7.7
9.5
16.0
34
56
77
86
0
0
0
0
240
240
150
90
150
150
150
90
366
366
366
366
8290A642
8290A482
8290A485
8290A488
8290A646
8290A495
8290A498
8290A501
60
60
60
60
150
150
150
150
13.5
15.0
17.0
21.5
-
0
0
0
0
240
240
240
240
150
150
150
150
366
366
366
366
8290A643
8290A489
8290A490
8290A492
8290A647
8290A502
8290A503
8290A505
IX IX IX IX 150
150
150
150
13.5
15.0
17.0
21.5
Available with NET-INOX treatment, add suffix "NI"; Minimum pilot pressure varies, see identified graph for appropriate values.
Dimensions: inches
32 mm Operator Graphs for Steam and Fluids
32 mm Operator
B
C
D
E
ØF
3.62 3.66 3.21 2.17 0.93
3.90 3.82 3.29 2.56 1.10
4.21 4.11 3.46 2.95 1.26
Normally Open Valve - Entry Under Disc
Normally Closed Valve - Entry Above Disc
150
150
Min. Pilot Pressure (psi)
in
in
in
ØA
3/8
1/2
3/4
3/4
120
90
1/2
3/8
60
30
I
0
60
120
180
120
90
3/4
3/8,1/2
60
30
II
0
240
30
60
90
120
150
Differential Pressure ∆p (psi)
Differential Pressure ∆p (psi)
Normally Closed
Normally Open
é 1.7
Ø 1.7
1/8
FILTER
PLUG
0Ê
˚
60
36
3
ØF
6
B
Ê
1.
50
˚
50
ØA
7
C
D
C
D
1/8
E
éA
éF
B
E
4
SERIES | 8290
Dimensions: inches
150
150
120
1
90
3/4
1/2
60
30
120
90
1
3/4
1/2
60
30
III
0
120
60
180
IV
0
240
Differential Pressure ∅P (psi)
90
120 150
Normally Open
F
1.06
1.26
1.61
Ø 2.7
1/8
FILTER
PLUG
0˚
36
˚
50
ØA
F
B
E
Normally Closed
Ø 2.7
0˚
36
1/8
7
1.
50
˚
E
2.56
2.95
3.54
C
D
50 mm Operator
B
C
D
5.59 6.08 5.55
5.92 6.26 5.63
6.10 6.50 5.71
60
C
D
in
in
in
ØA
1/2
3/4
1
30
ØA
F
B
E
7
4
SERIES | 8290
Dimensions: inches
2
150
1 1/4
1 1/2
2
150
120
1
90
3/4
1/2
60
30
120
1 1/2
90
1 1/4
1
3/4
1/2
60
30
V
0
60
120
180
VI
0
240
63 mm Operator
B
C
D
6.70 7.20 6.60
6.80 7.30 6.70
7.20 7.70 6.90
8.54 9.01 8.03
8.82 9.64 8.46
9.80 10.20 8.82
60
90
120 150
Normally Open
E
2.56
2.95
3.54
4.33
4.72
5.90
F
1.06
1.26
1.61
1.97
2.36
2.76
Ø 3.4
FILTER
PLUG
0˚
1/8
36
C
D
in
in
in
in
in
in
ØA
1/2
3/4
1
1 1/4
1 1/2
2
30
0
50
˚
2.
ØA
F
E
B
Normally Closed
Ø 3.4
FILTER
PLUG
1/8
0˚
C
D
36
0
50
˚
2.
ØA
8
F
B
E
4
SERIES | 8290
Dimensions: inches
2
150
150
120
1-1/2
90
1-1/4
60
1
30
0
120
120
180
2
1-1/2
60
1-1/4
30
VII
60
90
VIII
0
240
60
90
120 150
Normally Open
F
1.61
1.97
2.36
2.76
Ø 4.7
FILTER
PLUG
0˚
1/4
36
6
2.
50
˚
C
D
ØA
F
E
B
Normally Closed
Ø 4.7
FILTER
PLUG
1/4
0˚
36
6
2.
˚
50
E
3.54
4.33
4.72
5.91
C
D
in
in
in
in
90 mm Operator
ØA
B
C
D
1
8.00 8.50 7.70
1 1/4 9.29 9.69 8.70
1 1/2 9.57 10.31 9.13
2
10.51 10.87 9.49
30
ØA
F
B
E
9
4
SERIES | 8290
Dimensions: inches
150
120
2 1/2
90
2
60
1 1/2
1 1/4
30
IX
0
60
120
180
240
ØA
B
125 mm Operator
C
D
E
in 1 1/4 11.10 11.70 10.70
4.30
G
H
3.10
2.00
in 1 1/2 11.50 12.30 11.20
4.70
3.10
2.40
in
12.40 12.90 11.50
6.00
3.10
2.80
in 2 1/2 13.70 13.90 12.10
7.50
3.10
3.10
2
Normally Open
Ø 6.1
FILTER
PLUG
0˚
1/4
C
D
36
50
˚
G
ØA
H
E
B
Normally Closed
Ø 6.1
FILTER
PLUG
1/4
0˚
36
50
˚
C
D
G
ØA
10
H
B
E
4
SERIES | 8290
8290 SERIES | ACCESSORIES
Signaling Box
Supplied with two mechanical or inductive switches with LEDs and mounts on top of the
valve operator in place of the standard visual indicator. As the valve cycles, cams on the
signaling box lengthening stem operate the switches to provide electrical signaling of
the valve position. The signaling box can rotate 360˚.
Switches
Add Suffix
Two Mechanical
SM2
Assembly available on 50mm normally closed and
Two Inductive
SI2
63mm through 125mm normally open and normally
Two Intrinsically Safe
SH2
closed. (e.g., 8290A384SM2)
Compact Positioners for Proportional Control
Varies flow proportional to a 0-10 VDC, 0-20 mA or 4-20 mA control signal. Feedback of valve
stem position via a linear potentiometer. Uses a profiled disc for flow characterization. Assembly
available on 50mm through 125mm operators, normally
Control Signal
Add Suffix
0-10 VDC
PDB04
closed with fluid entry under disc. Positioner not suitable
0-20 mA
PDB05
for water piloting. (e.g., 8290A384PDB04)
4-20 mA
PDB06
Stroke Limiter
The stroke limiter allows Cv flow to be adjusted from 0% to 100%, and mounts on top of
the 8290 Series valve in place of the position indicator. Assembly available onto 50mm
(normally closed) and 63mm through 125mm normally open or normally closed valves with
fluid entry under the disc. Add suffix M: (e.g., 8290B002M)
Linear Position Indicator (HS4 Series)
Supplied with two mechanical switches and mounts on top of the valve operator in place of
the standard visual indicator. Provides a wiring box with 1/2" NPT conduit connections. The
HS4 linear position indicator is Type 4, 4X and IP 66 suitable for indoor and outdoor use in
non-hazardous locations.
Switches
Two (2) Mechanical SPDT Gold (IS) Switches
Two (2) Mechanical SPDT Silver (15A) Switches
Part Number
HS4D1YCH2NGA
HS4D1YCA2NGA
Pilot Valves
ASCO offers a variety of 3-way direct acting normally closed pilot valves to pilot
32mm through 125mm 8290 valves. Available in direct, in-line, and remote mounting.
To order, specify catalog number and voltage:
24, 120, 240 AC/60Hz or 110, 220 AC/50Hz or 6, 12, 24, 120/DC
Series 189
Series 8320
Numatics® G3
• Direct mount
• Swivel “Banjo” fittings,
1/8" NPT male
• Inlet for 4mm plastic tube
• DIN plug connection
•
•
•
•
• Remote mount
• 4 to 16 valves
• Compatible with AS-interface®, DeviceNet™, Profibus® DP,
FOUNDATION Fieldbus™, and others
• Air service only
In-line mount
1/8" or 1/4" NPT
Brass or stainless steel
(Explosionproof optional,
add prefix EF)
AS-interface is a registered trademark of AS-International. DeviceNet is a trademark of ODVA.
Profibus is a registered trademark of Profibus International.FOUNDATION Fieldbus is a trademark of Fieldbus Foundation.
11
Global Contacts
Australia
Canada
France
Japan
Singapore
Tel (61) 2-9-451-7077
Tel (1) 519-758-2700
Tel (33) 1-47-14-32-00
Tel (81) 798-65-6361
Tel (65) 6556-1100
Brazil
China
Germany
Mexico
United Kingdom
Tel (55) 11-4208-1700
Tel (86) 21-3395-0000
Tel (49)-7237-9960
Tel (52) 55-5809-5640
Tel (44) 1695-713600
ASCO Valve, Inc. | Tel (1) 800.972.2726 | www.ascovalve.com | e-mail: [email protected]
05/12 — V7393 R5
VALVES
2/2
E290
NC
pressure operated
bronze or stainless steel body
threaded ports, 3/8 to 2 1/2
Series
1
NO
2
FEATURES
•
•
•
•
High flow due to angled seat design
Anti-waterhammer design (fluid entry under the disc)
Vacuum operation up to 10-2 mbar
Wide range of piston-type operators (32 - 50- 63 - 90 -125 mm dia.) rotatable
through 360°, for maximum performance at different minimum pilot pressures
• High performance, maintenance-free stuffing box
• The valves satisfy Pressure Equipment Directive 97/23/EC, category 1 (DN > 25)
or article 3.3 (DN ≤ 25)
GENERAL
Differential pressure
Maximum allowable pressure
Ambient temperature range
Maximum viscosity
Pilot fluid
Max. pilot pressure
Min. pilot pressure
Pilot fluid temperature
Response time
See «SPECIFICATIONS» [1 bar =100 kPa]
16 bar
-10°C to +60°C
5000 cSt (mm2/s)
Filtered air or water (1)
10 bar
See below and following page
-10°C to +60°C
See page V402-7
fluids (✴)
temperature range
disc seal (✴)
DN ≤ 50: air and gas groups 1 & 2
DN 65: air and gas group 2
all DN: water, oil, liquids groups 1 & 2 and steam
- 10°C to + 184°C
PTFE
D
1
MATERIALS IN CONTACT WITH FLUID
2
(✴) Ensure that the compatibility of the fluids in contact with the materials is verified
Bronze body
Stainless steel body
Valve body
Bronze
AISI 316L
Stuffing box housing
Brass
AISI 316L
Stem
Stainless steel
Stainless steel
Disc
Brass
Stainless steel
Stuffing box packing
PTFE chevrons
PTFE chevrons
Wiper seal
FPM
FPM
Disc seal
PTFE
PTFE
Valve body seal
PTFE
PTFE
NC function, entry under the disc, 32 and 50 mm operators
OTHER MATERIALS
1
Operator
Optical position indicator
(1)
Glass fibre filled PA
PA 12, supplied standard on valves with 63, 90
and 125 mm operators
2
For dia. 32, 50, 63, 90 and 125 mm operators: At service fluid temperatures inside the valve body above
100°C, it is prohibited to pilot the valve with water.
NC function, entry under the disc, 63, 90 and 125 mm operators
00049GB-2011/R02
Availability, design and specifications are subject to change without notice. All rights reserved.
SPECIFICATIONS
piping
(ISO 6708)
pipe
size
DN
flow
coefficient
Kv
(m3/h) (l/min)
(G*)
pilot
pressure
(bar)
min.
operating pressure
differential (bar)
min.
max.
NC - Normally closed, entry under the disc
3/8
10
1/2
15
3/4
1
20
25
2,8
4,1
4,9
82
6,5
108
9,4
157
12,8
213
16,5
275
27
1 1/4
47
68
10
10
10
10
10
0
0
0
0
0
4
10
0
2,5
4
10
10
0
0
4
10
0
2,5
10
0
4
10
0
2,5
10
0
4
2,5
10
10
0
0
450
32
29
4
4
4
2,5
4
483
catalogue
number
operator
diameter
air, inert gas,
aggressive fluids
max.
water, oil, liquids,
aggressive liquids
(✴)
(✴)
(✴)
(≤184°C)
(mm)
16
12
16
16
6
10
16
12
6
10
16
6
12
6
12
3
7
16
16
16
12
16
16
6
10
16
12
6
10
16
6
12
6
12
3
7
16
16
10
10
10
10
6
10
10
10
6
10
10
6
10
6
10
3
7
10
10
32
32
50
63
32
50
63
63
50
63
90
63
90
63
90
63
90
125
125
steam
bronze
stainless steel
E290A384
E290B002
E290A385
E290B005
E290B004
E290A386
E290B010
E290B011
E290B008
E290B009
E290A016
E290A017
E290A014
E290A015
E290A642
E290A641
E290A791
E290A792
E290A393
E290B045
E290A793
E290A394
E290B048
E290B047
E290A395
E290B053
E290B054
E290B051
E290B052
E290A059
E290A060
E290A057
E290A058
E290A646
E290A645
(1)
All leaflets are available on: www.asconumatics.eu
V410-1
VALVES SERIES E290
SPECIFICATIONS
piping
(ISO 6708)
pipe
size
DN
flow
coefficient
Kv
(m3/h) (l/min)
(G*)
pilot
pressure
(bar)
min.
operating pressure
differential (bar)
min.
max.
catalogue
number
operator
diameter
air, inert gas,
aggressive fluids
max.
water, oil, liquids,
aggressive liquids
(✴)
(✴)
(✴)
(≤184°C)
(mm)
4
8
4
16
10
2,5
6
2,5
10
5
2
6
4
8
4
16
10
2,5
6
2,5
10
5
2
6
4
8
4
10
10
2,5
6
2,5
10
5
2
6
16
16
16
16
16
16
16
16
16
16
16
16
16
11
16
16
7
13
16
7
16
16
16
16
16
16
16
16
16
16
16
16
16
16
11
16
16
7
13
16
7
16
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
7
10
10
7
10
steam
bronze
stainless steel
63
90
90
125
125
63
90
90
125
125
90
125
E290A020
E290A021
E290A019
E290A482
E290A481
E290A024
E290A025
E290A023
E290A485
E290A484
E290A487
E290A488
E290A063
E290A064
E290A062
E290A495
E290A494
E290A067
E290A068
E290A066
E290A498
E290A500
E290A501
32
32
50
63
32
50
63
50
63
90
63
90
125
63
90
125
63
90
125
90
125
E290A387
E290B026
E290A388
E290B027
E290A389
E290B028
E290B029
E290A030
E290A031
E290A643
E290A032
E290A033
E290A489
E290A034
E290A035
E290A490
E290A491
E290A492
E290A794
E290A795
E290A396
E290B069
E290A796
E290A397
E290B070
E290B071
E290B072
E290A073
E290A074
E290A647
E290A075
E290A076
E290A502
E290A077
E290A078
E290A503
E290A504
E290A505
NC - Normally closed, entry under the disc (1)
45
1 1/2
2
2 1/2
750
40
48
800
59
983
66
1100
94
111
1567
1850
50
65
4
10
0
2,5
4
2,5
10
10
10
0
0
0
4
10
0
2,5
4
2,5
4
4
10
10
10
10
10
0
0
0
0
0
NO - Normally open, entry under the disc
3/8
10
1/2
15
3/4
20
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
12,8
213
16,5
275
27
450
29
483
45
750
48
800
59
983
66
94
111
1100
1567
1850
IX (✻)
IX (✻)
I (✻)
II (✻)
IX (✻)
I (✻)
II (✻)
I (✻)
II (✻)
III (✻)
II (✻)
III (✻)
IV (✻)
II (✻)
III (✻)
IV (✻)
II (✻)
III (✻)
IV (✻)
III (✻)
IV (✻)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3/8
10
1/2
15
3/4
20
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
213
275
1
25
12,8
16,5
1 1/4
32
27
450
1 1/2
40
45
750
2
50
59
983
65
94
111
1567
1850
2 1/2
X (✻)
X (✻)
V (✻)
VI (✻)
X (✻)
V (✻)
VI (✻)
V (✻)
VI (✻)
VI (✻)
VII (✻)
VI (✻)
VII (✻)
VI (✻)
VII (✻)
VII (✻)
VIII (✻)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
-
10
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
32
32
50
63
32
50
63
50
63
63
90
63
90
63
90
90
125
E290A390
E290B036
E290A391
E290B037
E290A392
E290B038
E290A039
E290A136
E290A040
E290A041
E290A042
E290A043
E290A623
E290A624
E290A797
E290A798
E290A399
E290B079
E290A799
E290A400
E290B080
E290A401
E290B081
E290A082
E290A137
E290A083
E290A084
E290A085
E290A086
E290A625
-
(✻) Minimum pilot pressure varies with differential pressure, see page V402-7.
(1)
Calculation of the minimum pilot pressure at a ΔP of max. 10 bar with allowable backpressure (backpressure not recommended with liquids as waterhammer may
occur).
- 32 and 50 mm operators, 4 bar minimum pilot pressure version: add 2 bar to the minimum pilot pressure of chart V or X, page V402-7.
- 63, 90 and 125 mm operators, 4 bar minimum pilot pressure version: add 1,5 bar to the minimum pilot pressure of chart VI, VII or VIII, page V402-7.
V410-2
00049GB-2010/R02
NC - Normally closed, entry above the disc (version recommended for rapid-cycling steam applications)
VALVES SERIES E290
OPTIONS AND ACCESSORIES (see page V435/V436)
•
•
•
•
•
•
•
•
•
•
•
Signaling box or compact signaling unit
Stroke limiter for opening
Manual safety device
Optical position indicator on 32-50 mm operators, NC function
Adapter plate for NAMUR pad mounting pilot (63-90-125 mm operators only)
Oxygen service (except DN 65), pressure limited to 15 bar, temperature limited to + 60°C
Vacuum applications up to 1,33 10-3 mbar
NET-INOX passivation treatment on stainless steel body valve
ATEX 94/9/EC versions for potentially explosive atmospheres
Pilot operated drain valve assembly with electronic timer (see Solenoids, Coils & Accessories section)
Other pipe connections are available on request
INSTALLATION
•
•
•
•
The valves can be mounted in any position without affecting operation
Compatible with ASTM 1, 2 and 3 oils
Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
Installation/maintenance instructions are included with each valve
SPARE PARTS KITS
ORDERING EXAMPLES:
spare parts kit no.
DN
10
15
20
25
32
40
50
65
Ø 32 mm
Ø 50-63-90-125 mm
C140100
C140101
C140102
-
C131204 (1)
C131205 (1)
C131206 (1)
C131207 (1)
C131208 (1)
C131209 (1)
C131622 (1)
E
E
E
E
D
290 A 792
290 B 002 SM2
290 A 791 SU
290 A 082
pipe thread
basic number
suffix
ORDERING EXAMPLES KITS:
(1)
Standard suffix VM also applies to kits (see V435).
- Not available
C140100
C140205
C140205
VM
suffix
basic number
32 mm operator
50 mm operator
63, 90 and 125 mm operators
00049GB-2011/R01
1
1
2
2
1
2
NO function
1
1
2
2
1
2
NC function, fluid entry above disc
V410-3
VALVES SERIES E290
DIMENSIONS (mm), WEIGHT (kg)
TYPE 01-02
32 and 50 mm operators
Fluid entry:
under the disc at 2
above the disc at 1
ØF
1/8
0˚
D
G
50
˚
C
36
ØA
type
operator
diameter
01
32 mm
02
50 mm
(1)
E
H
B
ØA
B
C
D
E
ØF
G
ØH
weight (1)
3/8
1/2
3/4
1/2
3/4
1
92
99
107
142
150,5
155
93
97
104,5
154,5
159
165
81,5
83,5
88
141
143
145
55
65
75
65
75
90
43,5
43,5
43,5
69
69
69
27
27
27
43
43
43
23,5
28
30
27
32
41
0,35
0,4
0,45
0,9
1
1,4
Weight of valve without pilot.
Solenoid pilot valves: see V440 (32 and 50 mm operators).
TYPE 03-04-05
Fluid entry:
under the disc at 2
above the disc at 1
Ø 158
Ø 156
1
ØF
36
0°
C
D
1/8 (Ø63 mm)
1/4 (Ø90-125 mm)
ØA
H
E
B
1
Operator dia. 125 mm, NO function
type
(1)
operator
diameter
03
63 mm
04
90 mm
05
125 mm
ØA
1/2
3/4
1
1 1/4
1 1/2
2
1
1 1/4
1 1/2
2
2 1/2
1 1/4
1 1/2
2
2 1/2
B
C
D
170 182 169
175 185 170
179 192 172
217 229 204
224 245 215
249 259 224
197 209 189
236 246 221
243 262 232
267 276 241
299 300 257
284 298 273
291 313,5 283,5
315 328 293
347 352 308
E
ØF
G
ØH
weight (1)
65
75
90
110
120
150
90
110
120
150
190
110
120
150
190
85
85
85
85
85
85
118
118
118
118
118
156
156
156
156
50,5
50,5
50,5
50,5
50,5
50,5
67
67
67
67
67
86
86
86
86
27
32
41
50
60
70
41
50
60
70
86
50
60
70
86
1,2
1,3
1,7
2,1
2,9
3,7
2,3
2,7
3,5
4,3
6,3
5,2
6
6,8
8,9
Weight of valve without pilot. Add 0,2 for dia. 125 mm operator NO.
Solenoid pilot valves: see V439 (63 mm operator) / V444 (90 and 125 mm operators).
V410-4
00049GB-2009/R01
50
°
G
VALVES
3/2
E390
2
NC
pressure operated
bronze body
threaded ports, 1/2 to 2
Series
1 3
2
NO
1 3
FEATURES
•
•
•
•
Remote-controlled valves with disc for industrial fluids
Wide range of piston-type operators (63 - 90 -125 mm dia.) rotatable through
360°, for maximum performance at different minimum pilot pressures
GENERAL
Maximum viscosity
Pilot fluid
Max. pilot pressure
Min. pilot pressure
Response time
16 bar
-10°C to +60°C
5000 cSt (mm2/s)
10 bar
-10°C to +60°C
See page V402-7
fluids (✴)
air and gas groups 1 & 2
water, oil, liquids groups 1 & 2 and steam
temperature range
disc seal (✴)
- 10°C to + 184°C
PTFE
Valve body
Bronze
Brass
Stem
Stainless steel
Disc
Stainless steel
PTFE chevrons
Wiper seal
FPM
Disc seal
PTFE
Valve body seal
PTFE
3
NC function
OTHER MATERIALS
Operator
(1)
2
1
2
1
3
NO function
For dia. 63, 90 and 125 mm operators: At service fluid temperatures inside the valve body above 100°C, it
is prohibited to pilot the valve with water.
SPECIFICATIONS
00083GB-2011/R02
piping
(ISO 6708)
pipe
size
DN
(G*)
flow
coefficient
Kv
pilot
pressure
(bar)
3 2
2 1
min.
(m3/h) (l/min) (m3/h) (l/min) min. max.
operating pressure
differential (bar)
max.
water, oil,
air
liquids
gas
operator
diameter
steam (✴)
catalogue
number
(✴)
(✴)
(184°C)
(mm)
16
4
16
10
16
5
11
6
12
4
8
16
6
10
4
10
10
10
5
10
6
10
4
8
10
6
63
63
63
63
90
63
90
63
90
63
90
125
90
E390B002
E390B001
E390B005
E390B010
E390B011
E390B008
E390B009
E390A016
E390A017
E390A020
E390A021
E390A482
E390A025
16
16
16
16
11
16
16
10
10
10
10
10
10
10
63
63
63
90
63
125
125
E390B026
E390B027
E390B028
E390A031
E390A032
E390A489
E390A490
1 1/4
32
24
400
18
300
5
10
0
1 1/2
40
42,9
715
31,8
530
5
10
0
2
50
52,8
880
39
650
5
10
0
16
4
16
10
16
5
11
6
12
4
8
16
6
II (✻)
II (✻)
II (✻)
III (✻)
II (✻)
IV (✻)
IV (✻)
10
10
10
10
10
10
10
0
0
0
0
0
0
0
16
16
16
16
11
16
16
1/2
15
6
100
4,5
75
3/4
20
9,6
160
7,2
120
1
25
16,2
270
12
200
3
2
5
10
10
10
0
0
0
5
10
0
3
10
0
1/2
3/4
1
1 1/4
15
20
25
32
6
9,6
16,2
24
100
160
270
400
4,5
7,2
12
18
75
120
200
300
1 1/2
40
42,9
715
31,8
530
2
50
52,8
880
39
650
V703-1
F
VALVES SERIES E390
•
•
•
•
•
•
•
•
Adapter plate for NAMUR pad mounting pilot
Oxygen service, pressure limited to 15 bar, temperature limited to + 60°C
3/2 version for mixing or distributing operations
Other pipe connections are available on request
INSTALLATION
•
•
•
•
The valves can be mounted in any position without affecting operation
Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
ORDERING EXAMPLES
SPARE PARTS KITS
DN
15
20
25
32
40
50
(2)
E
E
E
spare parts kit no.
Ø 63-90-125 mm
C140021 (2)
C140022 (2)
C140023 (2)
C140024 (2)
C140025 (2)
C140026 (2)
390 B 002
390 B 011 SM2
390 A 030
pipe thread
basic number
suffix
Standard suffix VM also applies to kits (see V435)..
C140021
C140022
C140024
VM
suffix
basic number
TYPE 01-02-03
Fluid entry:
under the disc at 3
ØF
1/8 (Ø63 mm)
1/4 (Ø90-125 mm)
1
C
360°
G
ØA
1
type
B
2
D
1
operator
diameter
3
01
63 mm
02
90 mm
03
125 mm
(3)
V703-2
ØA
B
C
D
ØF
G
weight (3)
1/2
3/4
1
1 1/4
1 1/2
1
1 1/4
1 1/2
2
1 1/2
2
39
44
52
57
61
52
57
61
69
61
69
198
203
212
237
244
223,5
248
255
264
309
318
68
84
92
110
125
92
110
125
145
125
145
85
85
85
85
85
118
118
118
118
156
156
50,5
50,5
50,5
50,5
50,5
67
67
67
67
86
86
1,6
1,9
2,6
3,2
4,5
3,2
3,7
5,2
6,2
7,7
8,7
00083GB-2010/R02
Ø 158
Ø 156
VALVES
2/2
S290
NC
pressure operated
stainless steel body
CLAMP or butt welding connection
DN 10 to 65
Series
1
NO
2
FEATURES
• Valve with clamp type connection to ISO 2852 for quick disconnection, a system
commonly used in the food processing industry or with butt welding connection to
ISO 6761 for stainless steel pipe to ISO 1127
• CLAMP valve body pickled in nitric/fluoric acid bath (NET-INOX passivation treatment)
• High flow due to angled seat design
• Anti-waterhammer design (fluid entry under the disc)
• Vacuum operation up to 10-2 mbar
• Wide range of piston-type operators (32 - 50- 63 - 90 -125 mm dia.) rotatable
through 360°, for maximum performance at different minimum pilot pressures
GENERAL
Maximum viscosity
Pilot fluid
Max. pilot pressure
Min. pilot pressure
Response time
16 bar
-10°C to +60°C
5000 cSt (mm2/s)
10 bar
-10°C to +60°C
See page V402-7
fluids (✴)
temperature range
disc seal (✴)
DN  50 : air et gaz groupes 1 & 2
DN 65: air and gas group 2
all DN: water, oil, liquids groups 1 & 2 and steam
- 10°C to + 184°C
PTFE
D
1
2
NC function, entry under the disc, 32 and 50 mm operators
Valve body
CLAMP connection
AISI 316L (NET-INOX treatment)
Butt welding connection
AISI 316L
AISI 316L
Stem
Stainless steel
Disc
Stainless steel
PTFE chevrons
Wiper seal
FPM
Disc seal
PTFE
Valve body seal
PTFE
1
2
NC function, entry under the disc, 63, 90 and 125 mm operators
CLAMP connection (not supplied)
CLAMP
connection
Operator
(1)
Butt
welding
connection
PA 12, supplied standard on valves with 63,
90 and 125 mm operators
For dia. 32, 50, 63, 90 and 125 mm operators: At service fluid temperatures inside the valve body above
100°C, it is prohibited to pilot the valve with water.
SPECIFICATIONS
DN
O.D. of
stub
(clamp)
O.D. of
stub
(butt)
00052GB-2011/R02
OTHER MATERIALS
flow
coefficient
Kv
pilot
pressure
(bar)
operating pressure
differential (bar)
max.
min.
(mm) (mm) (m3/h) (l/min) min. max.
air, inert gas,
aggressive fluids(✴)
catalogue
number
operator
diameter
water, oil,
liquids,
aggressive liquids(✴)
steam (✴)
(184°C)
(mm)
16
12
16
16
6
10
16
12
6
10
16
6
12
10
10
10
10
6
10
10
10
6
10
10
6
10
32
32
50
63
32
50
63
63
50
63
90
63
90
clamp connection
butt welding connection
S290A800
S290A804
S290A408
S290B137
S290A808
S290A409
S290B140
S290B139
S290A410
S290B145
S290B146
S290B143
S290B144
S290A802
S290A806
S290A417
S290B205
S290A810
S290A418
S290B208
S290B207
S290A419
S290B211
S290B212
S290B210
-
10
34
17,2
15
34
21,3
20
50,5
26,9
25
50,5
33,7
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
12,8
213
16,5
275
4
4
4
2,5
4
10
10
10
10
10
0
0
0
0
0
4
10
0
2,5
4
10
10
0
0
4
10
0
2,5
10
0
16
12
16
16
6
10
16
12
6
10
16
6
12
V420-1
VALVES SERIES S290
DN
O.D. of
stub
(clamp)
O.D. of
stub
(butt)
SPECIFICATIONS
flow
coefficient
Kv
pilot
pressure
(bar)
operating pressure
differential (bar)
max.
min.
(mm) (mm) (m3/h) (l/min) min. max.
water, oil,
liquids,
aggressive liquids(✴)
steam (✴)
(184°C)
(mm)
6
12
3
16
4
8
4
16
2,5
6
2,5
10
5
2
6
1
6
12
3
16
4
8
4
16
2,5
6
2,5
10
5
2
6
1
6
10
3
10
4
8
4
10
2,5
6
2,5
10
5
2
6
1
16
16
16
16
16
16
16
16
16
16
11
13
16
7
16
16
16
16
16
16
16
16
16
16
16
11
13
16
7
16
10
10
10
10
10
10
10
10
10
10
10
10
10
7
10
air, inert gas,
aggressive fluids(✴)
catalogue
number
operator
diameter
clamp connection
butt welding connection
63
90
63
125
63
90
90
125
63
90
90
125
125
90
125
125
S290A151
S290A155
S290A156
S290A154
S290A521
S290A687
S290A688
S290A685
S290A689
S290A686
S290A691
S290A690
S290A692
S290A215
S290A216
S290A214
S290A670
S290A217
S290A218
S290A573
S290A719
S290A720
S290A721
S290A722
S290A723
32
32
50
63
32
50
63
50
63
63
63
63
90
90
125
S290A812
S290A816
S290A411
S290B161
S290A820
S290A412
S290B162
S290A413
S290B163
S290A164
S290A165
S290A693
S290A694
S290A695
S290A696
S290A814
S290A818
S290A420
S290B221
S290A822
S290A421
S290B222
S290A422
S290B223
S290A224
S290A225
S290A724
S290A725
S290A726
S290A727
32
40
50
65
64
64
77,5
91
42,4
48,3
27
450
29
483
45
750
48
800
59
983
60,3
76,1
66
1100
94
1567
111
1850
4
10
0
2,5
4
10
10
0
0
4
10
0
2,5
4
10
10
0
0
4
10
0
2,5
4
2,5
4
4
2,5
10
10
10
10
10
10
0
0
0
0
0
0
10
34
17,2
2,8
4,1
15
34
21,3
20
50,5
26,9
25
50,5
33,7
32
40
64
64
42,4
48,3
12,8
16,5
27
45
50
77,5
60,3
59
65
91
76,1
94
111
4,9
6,5
9,4
IX (✻)
IX (✻)
I (✻)
82
II (✻)
108 IX (✻)
I (✻)
157
II (✻)
I (✻)
213
275 II (✻)
450 II (✻)
750 II (✻)
II (✻)
983
III (✻)
1567 III (✻)
1850 IV (✻)
47
68
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
34
17,2
15
34
21,3
20
50,5
26,9
25
50,5
33,7
32
64
40
50
65
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
42,4
12,8
16,5
27
213
275
450
64
48,3
45
750
77,5
60,3
59
983
76,1
94
111
1567
1850
91
X (✻)
X (✻)
V (✻)
VI (✻)
X (✻)
V (✻)
VI (✻)
V (✻)
VI (✻)
VI (✻)
VI (✻)
VII (✻)
VI (✻)
VII (✻)
VII (✻)
VIII (✻)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
-
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
32
32
50
63
32
50
63
50
63
63
63
90
63
90
90
125
S290A824
S290A828
S290A414
S290B167
S290A832
S290A415
S290B168
S290A416
S290B169
S290A170
S290A171
S290A697
S290A698
S290A699
S290A700
S290A826
S290A830
S290A423
S290B227
S290A834
S290A424
S290B228
S290A425
S290B229
S290A230
S290A231
S290A259
S290A728
S290A729
S290A730
S290A731
(1)
Calculation of the minimum pilot pressure at a ΔP of max. 10 bar with allowable backpressure (backpressure not recommended with liquids as waterhammer may occur).
- 32 and 50 mm operators, 4 bar minimum pilot pressure version: add 2 bar to the minimum pilot pressure of chart V or X, page V402-7..
- 63, 90 and 125 mm operators, 4 bar minimum pilot pressure version: add 1,5 bar to the minimum pilot pressure of chart VI, VII or VIII, page V402-7.
V420-2
00052GB-2010/R03
10
VALVES SERIES S290
•
•
•
•
•
•
•
•
•
Optical position indicator on 32-50 mm operators, NC function
Adapter plate for NAMUR pad mounting pilot (63-90-125 mm operators only)
Oxygen service (except DN 65), pressure limited to 15 bar, temperature limited to + 60°C
NET-INOX passivation treatment on valve body with butt welding connection
INSTALLATION
• The valves can be mounted in any position without affecting operation
• On clamp connection version: The connection stubs comply with ISO 2852.
The strength of the quick-disconnect connection clamp must be compatible with the maximum pressure applied to the valve
• On butt welding version: Compatible with ASTM 1, 2 and 3 oils
Butt welding connections comply with ISO 6761 and are compatible with pipe to ISO 1127
• Installation/maintenance instructions are included with each valve
SPARE PARTS KITS
ORDERING EXAMPLES:
spare parts kit no.
DN
10
15
20
25
32
40
50
65
Ø 32 mm
Ø 50-63-90-125 mm
C140100
C140101
C140102
-
C131204 (1)
C131205 (1)
C131206 (1)
C131207 (1)
C131208 (1)
C131209 (1)
C131622 (1)
S
S
S
S
D
290 A 804
290 B 137 SM2
290 A 155 SU
290 A 170
pipe thread
basic number
suffix
(1)
- Not available
C140100
C140205
C140205
VM
suffix
basic number
DIMENSIONS (mm), WEIGHT
TYPE 01-02-03-04-05
Ø 158
Ø 156
1
ØF
type
1/8 (Ø32-50-63 mm)
1/4 (Ø90-125 mm)
01
0°
36
C
D
02
50
°
G
ØH
2
ØJ
03
1
E
ØA
B
ØJ
ØH
04
ØA
00052GB-2011/R01
32, 50, 63, 90 and 125 mm operators
Fluid entry:
under the disc at 2
above the disc at 1
05
(1)
1
operator
DN
diameter
10
32
15
20
15
50
20
25
15
20
25
63
32
40
50
25
32
40
90
50
65
32
40
125
50
65
ØA
B
C
D
10
16
20
15,5
21,5
26
15,5
21,5
26
35
41
50
26
35
41
50
65
35
41
50
65
102,5
110,7
111,6
153
158
167
182
184
191
226
235
257
209
245
254
275
302
291
301
322,5
349,5
104,7
105,8
113,6
158,5
168
170,5
186
195
197
236
247
263
214
253
264
280
302,5
307
316
332
353,5
87,7
88,8
88,4
141
143
145
169
170
172
204
215
224
189
221
232
241
257
273
284
293
308
E
ØF
80 43,5
101,6 43,5
114 43,5
102 69
114 69
129 69
102 85
114 85
129 85
140 85
159 85
180 85
129 118
140 118
159 118
180 118
205 118
140 156
159 156
180 156
205 156
G
ØH
ØJ
27
27
27
43
43
43
50,5
50,5
50,5
50,5
50,5
50,5
67
67
67
67
67
86
86
86
86
34
34
50,5
34
50,5
50,5
34
50,5
50,5
64
64
77,5
50,5
64
64
77,5
91
64
64
77,5
91
27,5
27,5
43,5
27,5
43,5
43,5
27,5
43,5
43,5
56,5
56,5
70,5
43,5
56,5
56,5
70,5
83,5
56,5
56,5
70,5
83,5
weight
(1)
0,4
0,43
0,59
0,9
1
1,4
1,2
1,3
1,7
2,1
2,8
3,7
2,2
2,7
3,4
4,2
6,2
5,2
5,9
6,7
8,8
V420-3
VALVES SERIES S290
TYPE 01-02-03-04-05
32, 50, 63, 90 and 125 mm operators
Fluid entry:
under the disc at 2
above the disc at 1
Ø 158
Ø 156
1/8 (Ø32-50-63 mm)
1/4 (Ø90-125 mm)
ØF
type
1
01
0°
D
02
G
50
°
C1
36
ØA
03
2
1
E1
H1
B1
ØH1
ØA
04
05
1
(1)
32 mm operator
operator
DN
diameter
10
32
15
20
15
50
20
25
15
20
25
63
32
40
50
25
32
40
90
50
65
32
40
125
50
65
ØA
B1
C1
D
10
16
20
15,5
21,5
26
15,5
21,5
26
35
41
50
26
35
41
50
65
35
41
50
65
102,5
101,9
103,6
144
150
159
172
175
183
218
227
249
201
237
246
267
294
283
294
314,5
341,5
96,9
100,5
102,4
152
157
162
181
184
190
226
240
254
207
243
257
271
295
295
308
323
346
87,7
88,8
88,4
141
143
145
169
170
172
204
215
224
189
221
232
241
257
273
284
293
308
E1 ØF
80
84
98
84
98
113
84
98
113
124
143
164
113
124
143
164
189
124
143
164
189
43,5
43,5
43,5
69
69
69
85
85
85
85
85
85
118
118
118
118
118
156
156
156
156
G
ØH1
27
27
27
43
43
43
50,5
50,5
50,5
50,5
50,5
50,5
67
67
67
67
67
86
86
86
86
17,2
21,3
26,9
21,3
26,9
33,7
21,3
26,9
33,7
42,4
48,3
60,3
33,7
42,4
48,3
60,3
76,1
42,4
48,3
60,3
76,1
weight
(1)
0,37
0,4
0,45
0,9
1
1,3
1,2
1,3
1,6
2
2,7
3,6
2,1
2,6
3,3
4,1
6,1
5,1
5,8
6,7
8,7
50 mm operator
1
2
1
2
2
NO function
1
1
2
1
2
2
NC function, entry above the disc
V420-4
00052GB-2009/R01
1
PROPORTIONAL VALVES
WITH POSITIONERD
2 way
3 way
1•
•
•
P
•
NC
pressure operated
all standard connection types
2
Series
•
(2) (1)
290/390
2•
3
1
•
••
P
• •
(2) (1)
FEATURES
Kv
• Precise, quick-acting and robust valve suitable for
use in outside industrial environments
• Exceptional long service life
• Variable flow proportional to the control signal
• Real-time control
• Ready-to-use valve
• The positioner can be directly connected to an
external sensor (double loop control)
• Power saving function and no air consumption when
position is reached
• Manual valve operator
• LED indicators for valve status display
B
input control signal
GENERAL
0 to 16 bar [1 bar =100 kPa]
Maximum allowable pressure 16 bar
0°C to +50°C
Maximum viscosity
5000 cSt (mm2/s)
Pilot fluid
Air or inert gas, filtered 25 µm, unlubricated,
condensate-free and water-free (observe the pressure dew point) (6)
Pilot pressure
4 to 8 bar
0°C to +50°C
Response time
See page V402-7
Fluids
For type, temperature and materials compatibility,
see the catalogue pages for the standard valves
V410, V420, V431 and V703
ELECTRICAL CHARACTERISTICS
Setpoint reached output
ON/OFF, 24 V PNP / max. 500 mA
Analog position feedback signal 0-10 V / 4-20 mA
Analog setpoint
0-10V (Rin = 200 kΩ); 4-20 mA (Rin = 250 Ω)
Nominal supply voltage
24 V DC ± 10%, max. ripple 10%
Power
7,6 W (3,6 W, setpoint reached)
Connection
Screw terminals, cable gland (cable Ø 5-10 mm)
or connection M12 (CNOMO E03.62.520.N)
Degree of protection
IP66 (EN 60529)
Electromagnetic compatibility
EMC 2004/108/EC
Regulation characteristics Hysteresis < 2% ; Accuracy < 2 % ; Repeatability < 1 %
CONSTRUCTION
Valve construction
Valve disc (2/2)
Valve disc (3/2)
Positioner body
Cable gland
Cover
2
See sections D and F
Profiled disc, stainless steel and PTFE
Standard disc
PA (polyamide), 6/6 GF 30% (glass fibre reinforced)
Steel (cable Ø 4,5-9 mm)
PA 12, transparent
double loop for positioner with directly
connected external sensor
single loop
00196GB-2012/R03
1
Pp
Pp
(1)
(1)
(2)
(2)
open or closed loop control
Setpoint
Value measured by the process sensor
(1)
closed loop control
(2)
SPECIFICATIONS (NC valves, fluid entry under the disc)
suffix for proportional valve and positioner (3)
delivered assembled
analog setpoint
2 way
fail in last position (4)
fail close (5)
2 way
3 way (7)
3 way (7)
cable gland
M12
cable gland
M12
cable gland
M12
cable gland
M12
0 - 10 V DC
4 - 20 mA
PDB64
PDB65
PDB68
PDB69
B64
B65
B68
B69
PDB66
PDB67
PDB70
PDB71
B66
B67
B70
B71
0 - 10 V DC
4 - 20 mA
-
-
-
-
PDB72
PDB73
PDB74
PDB75
B72
B73
B74
B75
Positioner , single loop
D
PositionerD, double loop
Place the indicated suffix after the catalogue number of the valve selected.
Valve disc remains in its last position on loss of power.
Valve returns to closed position on loss of power.
The actuator exhaust air is used to ventilate the electronics housing.
Top orifice of this version is not tight, for the tight version contact us.
(3)
(6)
(4)
(7)
(5)
V162-1
PROPORTIONAL VALVE + PositionerD SERIES 290/390
VALVE SPECIFICATIONS
orifice
size
pipe
size
(DN)
2 way (2)
operator
diameter
max.
min.
(mm)
flow coefficient (Kv), programmable opening of proportional valve
2 way, threaded
2 way, flanges
3 way, threaded
pilot
pressure
(bar)
(1)
3 way
bronze,
stainless steel
(E290) (V410)
clamp / butt welding (S290)
(V420)
bronze
(E390)
(V703)
bronze (T290)
(V431)
(mm)
(m3/h)
(l/min)
(m3/h)
(l/min)
(m3/h)
(l/min)
63
63
90 63
63/90
63/90
125
63/90
125
63/90
125
90
125
7,1
15
21
22
29
44
40
66
68
74
118
250
350
367
483
733
667
1100
1133
1233
11
14
15
21
32
26,5
44
-
183
233
250
350
533
442
733
-
6
9,6
16,2
24
42,9
42,9
52,8
52,8
-
100
160
270
400
715
715
880
880
-
1/2 (15)
15
3/4 (20)
20
1 (25)
25
1 1/4 (32)
32
1 1/2 (40)
40
2 (50)
50
2 1/2 (65)
65
3/5
3/5
3/5
3/5
4
4
4
4
4
4
2/3
3/5
3/5
5
3/5
3/5
5
5
5
-
8
8
8
8
8
8
8
8
8
8
8
8
For best control loop operation, we recommend the following pilot pressures:
max. 3 bar (valve with 1,5 bar operator) ; max. 5 bar (valve with 2,5 bar operator) ; max. 7 bar (valve with 4 bar operator)
(2)
3 bar (valve with 2,5 bar operator) ; 5 bar or 4 bar (valve with 4 bar operator)
(1)
OPTIONS AND ACCESSORIES
• Standard 2/2 NC valve, fluid entry under the disc, with profiled disc only, use suffix PD, example: E290A016PD
• Female M12 connector:
straight
- 5 pins, with screw terminals,
catalogue number:
88100256
- Supply cable 5 m,
5 x 0,25 mm2,
catalogue number:
88130212
- Supply cable 5 m,
6 x 0,5 mm2,
catalogue number:
88100728
- Supply cable 10 m,
6 x 0,5 mm2,
catalogue number:
88100730
• APC software for modification of control parameters (software required for double loop control) available for download at:
www.asconumatics.eu
• RS-232 converter, 2 m cable with 9 pin Sub-D connector for PC link, catalogue number 88100732
• Oxygen service (except DN 65), pressure limited to 15 bar, temperature limited to + 60°C, suffix N
• Vacuum applications up to 1,33 10-3 mbar, suffix VM
• Other pipe connections are available on request
INSTALLATION
diagnostics
hold position
valve OPEN
valve CLOSED
valve moves to open
valve moves to close
positioner in initialisation mode
positioner in manual mode
setpoint > 20,5 mA / 10,25 V
setpoint < 3,5 mA
positioner not initialised
component error
Electrical connection:
PositionerD, single loop
PositionerD, double loop
screw terminals
M12
1
screw terminals
4
M12
1
5
2
1
2
3
4
6
7
+ 24 V DC, supply
GND supply
+ setpoint (0-10 V or 4-20 mA)
GND setpoint
disc position feedback
+ 24V ON/OFF output
3
1
3
2
3
4
5
2
1
2
3
4
5
7
V162-2
4
5
+ 24 V DC, supply
GND supply
+ setpoint (0-10 V or 4-20 mA)
GND setpoint
external sensor input
+ 24V ON/OFF output
3
1
3
2
3
4
5
00196GB-2012/R02
Pilot port G 1/8 according to ISO 228/1
LED indicators for operating status display and diagnostic functions (Unit can be rotated through 360° around the centreline of
the valve operator)
status
•
•
•
•
SPARE PARTS KITS
ORDERING EXAMPLES:
spare parts kit no.
PositionerD only
cable gland (cable Ø 5-10 mm)
E
E
E
E
connection M12
Fail position maintained, single loop
0-10 V
4-20 mA
60568108
60568308
60569108
60569308
0-10 V
4-20 mA
60568118
60568318
60569118
60569318
Fail close, single loop
Fail close, double loop
0-10 V
4-20 mA
60568418
60568518
60569418
60569518
all
C140423
C140423
Mounting kit
bronze, stainless steel (E290)
clamp / butt welding (S290)
PDB64
B64
PDB68
PDB71
pipe thread
basic number
suffix
C131204
C140206
C140205
VM
suffix
basic number
spare parts kit no.
pipe
size
(DN)
290 A 016
390 A 016
290 A 059
290 A 102
bronze
(T290)
bronze
(E390)
C140017 (1)
C140018 (1)
C140019 (1)
C140020 (1)
-
C140021 (1)
C140022 (1)
C140023 (1)
C140024 (1)
C140025 (1)
C140026 (1)
-
Valve disc seals
C131204 (1)
C131205 (1)
C131206 (1)
C131207 (1)
C131208 (1)
C131209 (1)
C131622 (1)
1/2 (15)
3/4 (20)
1 (25)
1 1/4 (32)
1 1/2 (40)
2 (50)
2 1/2 (65)
(1)
Standard suffix VM is also applicable to kits (see V435).
- Not available.
TYPE 01
TYPE 02
Enclosure with cable gland
63 to 125 mm operator
Fluid entry:
under the disc at 2
Enclosure with M12 connection
63 to 125 mm operator
Fluid entry:
under the disc at 2
85
84
112
57
00196GB-2012/R01
112
60
2
1
2
1/8
1
1/8
2
1
3
3
1
1
2
2
1
2
3
M16 x 1,5 mm cable gland (cable Ø 4,5-9 mm)
M12 connection
G 1/8 pilot connection
Weight of positioner without valve: 0,3 kg
V162-3
B
00196GB-2008/R01
V162-4
VALVES
2/2
T290
NC
pressure operated
bronze body
with flanges PN16, DN 25 to 50
Series
1
NO
2
FEATURES
•
•
•
•
Remote-controlled valves with disc for industrial fluids
Wide range of piston-type operators (63 - 90 -125 mm dia.) rotatable through
360°, for maximum performance at different minimum pilot pressures
or article 3.3 (DN 25)
GENERAL
Maximum viscosity
Pilot fluid
Max. pilot pressure
Min. pilot pressure
Response time
16 bar
-10°C to +60°C
5000 cSt (mm2/s)
10 bar
-10°C to +60°C
See page V402-7
fluids (✴)
temperature range
disc seal (✴)
air and gas groups 1 & 2
water, oil, liquids groups 1 & 2 and steam
- 10°C to + 184°C
PTFE
D
CONSTRUCTION
2
Connection
Facing
NC function, entry under the disc
Valve body
Bronze
Brass
Stem
Stainless steel
Disc
Brass
PTFE chevrons
Wiper seal
FPM
Disc seal
PTFE
Valve body seal
PTFE
2
1
OTHER MATERIALS
Operator
(1)
1
Flange type 21 (ISO 7005) - PN 16
Type A
NO function
2
1
NC function, entry
above the disc
For dia. 63, 90 and 125 mm operators: At service fluid temperatures inside the valve body above 100°C, it
is prohibited to pilot the valve with water.
00053GB-2011/R02
SPECIFICATIONS
DN
orifice
size
(mm)
flow
coefficient
Kv
pilot
pressure
(bar)
operating pressure
differential (bar)
max.
min.
(m3/h) (l/min) min. max.
operator
diameter
catalogue
number
air
inert gas
(✴)
water, oil,
liquids
(✴)
steam (✴)
(184°C)
(mm)
10
16
6
12
6
12
7
4
8
16
10
2,5
6
10
5
10
10
6
10
6
10
7
4
8
10
10
2,5
6
10
5
63
90
63
90
63
90
90
63
90
125
125
63
90
125
125
T290A010
T290A011
T290A008
T290A009
T290A016
T290A017
T290A015
T290A020
T290A021
T290A482
T290A481
T290A024
T290A025
T290A485
T290A484
16
16
16
16
10
10
10
10
63
90
63
125
T290A028
T290A029
T290A030
T290A643
25
32
40
50
25
32
18
300
2,5
10
32
530
4
10
0
35
583
4
2,5
10
10
0
0
39
650
4
10
0
733
4
2,5
10
10
0
0
10
16
6
12
6
12
7
4
8
16
10
2,5
6
10
5
0
0
0
0
16
16
16
16
12
10
0
2,5
10
0
4
10
0
0
200
40
50
44
4
25
25
12
200
32
32
18
19
300
317
II (✻)
III (✻)
II (✻)
IV (✻)
10
10
10
10
V431-1
VALVES SERIES T290
SPECIFICATIONS
DN
flow
coefficient
Kv
orifice
size
pilot
pressure
(bar)
operating pressure
differential (bar)
max.
min.
(m3/h) (l/min) min. max.
(mm)
operator
diameter
air
inert gas
(✴)
water, oil,
liquids
(✴)
steam (✴)
(184°C)
(mm)
11
16
16
13
16
11
16
16
13
16
10
10
10
10
10
63
90
125
90
125
catalogue
number
40
40
50
50
32
530
35
39
44
583
650
733
II (✻)
III (✻)
IV (✻)
III (✻)
IV (✻)
10
10
10
10
10
0
0
0
0
0
T290A032
T290A033
T290A489
T290A035
T290A490
25
25
12
200
32
32
18
300
40
40
32
530
50
50
39
650
VI (✻)
VI (✻)
VII (✻)
VI (✻)
VII (✻)
VI (✻)
VII (✻)
10
10
10
10
10
10
10
0
0
0
0
0
0
0
10
10
10
10
10
9
10
-
10
10
10
10
10
9
10
63
63
90
63
90
63
90
T290A038
T290A039
T290A136
T290A040
T290A041
T290A042
T290A043
(1)
Calculation of the minimum pilot pressure at a ΔP of max. 10 bar with allowable backpressure (backpressure not recommended with liquids as waterhammer may occur)
63, 90 and 125 mm operators, 4 bar minimum pilot pressure version: add 1,5 bar to the minimum pilot pressure of chart VI, VII or VIII, page V402-7.
•
•
•
•
•
•
•
Adapter plate for NAMUR pad mounting pilot
Oxygen service, pressure limited to 15 bar, temperature limited to + 60°C
INSTALLATION
• The valves can be mounted in any position without affecting operation
• Compatible with ASTM 1, 2 and 3 oils
• Installation/maintenance instructions are included with each valve
SPARE PARTS KITS
ORDERING EXAMPLES:
spare parts kit no.
Ø 63-90-125 mm
C140017 (2)
C140018 (2)
C140019 (2)
C140020 (2)
25
32
40
50
(2)
T
T
T
pipe thread
basic number
C140017
C140018
C140019
Fluid entry:
under the disc at 2
above the disc at 1
2
type
C
01
B
1
G
2
1
ØJ
ØA
02
ØL
4 x ØK
E
D
E
Flange type 21 with flat faces, type A (ISO 7005)
V431-2
suffix
ØF
1/8 (Ø63 mm)
1/4 (Ø90-125 mm)
2
VM
basic number
360°
1
suffix
TYPE 01-02-03
Ø 158
Ø 156
290 A 010
290 A 011 SM2
290 A 030
03
(3)
operator
ØA
diameter
25
32
63
40
50
25
32
90
40
50
32
125
40
50
B
C
D
288
313
329
354
303
325
341
365
378
394
418
230
243
254
271
246
255
266
283
308
319
336
110
130
140
160
110
130
140
160
130
140
160
E ØF
12
14
14
16
12
14
14
16
14
14
16
85
85
85
85
118
118
118
118
156
156
156
G
50,5
50,5
50,5
50,5
67
67
67
67
86
86
86
ØJ ØK ØL
115
140
150
165
115
140
150
165
140
150
165
14
18
18
18
14
18
18
18
18
18
18
85
100
110
125
85
100
110
125
100
110
125
weight
(3)
3,9
5,9
7,1
10,5
4,5
6,5
7,7
11,1
9
10,2
13,6
00053GB-2010/R02
DN
www.eci.co
Sede Bogotá D.C, Colombia
Transversal 18Bis No 38-41
Calle 23 No 116-31 Bod. 32
Tel: +57(1) 3275151
Fax: +57(1) 2884838 / 2885589
[email protected]
[email protected]
Sede Quito, Ecuador
Suiza 361 y República de El Salvador
Ed. Euro, Oficina 7B
Tel: +593(2) 600 6882
Fax: +593(2) 333 2567

Válvulas Pilotadas Por Aire

Transcription

Similar documents

8290 SERIES| Angle Body Piston Valves

VALVES 2/2 E290

Popular Parts List - oe