Karts and Parts

Transcription

Karts and Parts
Karts and Parts
Product
Catalog
Recreational Vehicle Components
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Terms of Sale & Warranties
Ordering: Order by mail, by phone or 24 hours a day by fax or e-mail to:
Shipping Address:
Karts and Parts
7051 Hunters Creek Rd.
South Wales, New York 14139
Mailing Address:
Karts and Parts
7051 Hunters Creek Rd.
South Wales, New York 14139
Phone: 716-655-2883
Fax: 716-655-2883
E-mail: [email protected]
When ordering please specify our part number, quantity and how you may be contacted.
Prices: Prices are subject to change without notice and are F.O.B. shipping point (South Wales, NY);
shipping charges are added to quoted prices and appear on your invoice.
Terms: ALL SALES are Cash-in-advance. Credit Card, Money Order, certified check in U.S. funds only
or personal checks are the only accepted forms of payment. Personal checks will delay order processing.
Delivery: We strive to give your order our immediate attention. We appreciate as much lead time as
possible in order to schedule your shipment. Shipping will be via US Postal Service Parcel Post, UPS
Ground or DHL Ground. If you need your shipment quicker or for areas outside the lower 48 states please
e-mail us for a shipping quote before ordering.
Claims and Returned Goods: Goods mat not be returned without our prior authorization. Contact us for
an RGA number; we may refuse to accept unauthorized returns. Claims for breakage or loss must be made
directly with the carrier. Claims of defect or shortage must be made within ten days of delivery of order.
Returned goods are subject to an inspection and handling charge of 15%. Full credit or replacement will be
given if there is a manufacturing defect or an error in filling the order.
Limited Warranty: Seller warrants to the original purchaser only that goods will be of the kind and
quality described in the invoice and will be free of defects in material or workmanship for a period of 90
days from the original date of the original buyer’s purchase. After proper notification by the original
purchaser as described below and upon Seller’s satisfaction that goods have been stored, transported,
installed, maintained and operated as required by Seller and in accordance with standard industry practice.
Seller will, at its option, repair or replace goods that are found to Seller’s satisfaction, to be nonconforming or defective in material or workmanship. Seller may refund the purchase price to the original
purchaser if Seller is unable by repair or replacement to make the goods perform the function for which
they, according to Seller, were designed. This warranty does not obligate Seller to bear any transportation,
shipping, removal or installation charges in connection with goods covered by this warranty.
This warranty does not cover defects or costs caused by: 1.) wear and tear. 2.) modification, alteration,
repair or service of the goods other than by Seller. 3.) physical abuse to or misuse of the goods. 4.) use of
the goods other than that for which they were intended as designated by Seller.
Terms of Sale & Warranties
To obtain warranty benefits the original purchaser must within the warranty period: 1.) notify Seller in
writing of the particulars of the defect or failure or the goods to conform; and 2.) deliver the goods to Seller
at the address listed above on this page with shipping costs to be born by purchaser.
THE ABOVE WARRANTIES ARE EXCLUSIVE, THE ONLY WARRANTIES ON ANY GOODS
WHETHER MANUFACTURED BY SELLER OR OTHERS AND ARE IN LIEU OF ANY
WARRANTY OF MERCANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL
WARRANTIES WHETHER EXPRESS OR IMPLIED, OTHER THAN AS STATED ABOVE ARE
SPECIFICALLY EXCLUDED AND DISCLAIMED. ANY DESCRIPTION OF THE GOODS,
AFFIRMATION OF FACT OR PROMISE, SAMPLE, MODEL, PHOTOGRAPH,
ILLUSTRATION OR MODEL, WHETHER OR NOT IN THIS CATALOG, IS NOT A PART OF
THE BASIS OF THE BARGAIN AND DOES NOT CONSTITUTE A WARRANTY THAT THE
GOODS WILL CONFORM THERETO.
Limitation of Liability: Correction of defects and/or non-conformities, in the manner and for the period of
time provided above, shall constitute fulfillment of all liabilities of the seller to any purchaser whether
based on contract or otherwise. The seller shall not under any circumstances be liable for any damages,
whether direct, special, incidental or consequential whatsoever. The remedies set forth herein are exclusive
and the liability of Seller with respect to any contract, or anything done in connection therewith including
but not limited to the performance or breach thereof or from the manufacture, sale, delivery, resale,
installation or use of any goods covered by or furnished under this contract whether arising out of contract,
negligence, or under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the
price of the non-conforming or defective goods upon which such liability is based. Without limiting the
foregoing, no liability shall result from delay in performance or non-performance caused by circumstances
beyond our control, including but not limited to acts of God, fire, flood, war, government action, accident
or work stoppage.
Printers, Stenographic and Clerical Errors: In the course of doing business, errors by printers,
stenographers, computer operations and clerks sometimes occur. We reserve the right to correct any such
errors without penalty.
INDEX OF PRODUCTS
A
“A” Type Sprockets. . . . . . . . . . 26-29
Adapter Hubs. . . . . . . . . . . . . . . . . 11
Aluminum Wheels. . . . . . . . . . 4, 5, 6
ATV Wheels. . . . . . . . . . . . . . . . . . . 7
ATV Wheel Adapter Hubs. . . . . . . . 11
Axles . . . . . . . . . . . . . . . . . . 20-21, 40
Aluminum. . . . . . . . . . . . . . . . . 20
ATV. . . . . . . . . . . . . . . . . . . 20, 21
Chrome-Moly Tubular. . . . . . . . 20
Flexpruf Steel. . . . . . . . . . . . . . . 21
Kart. . . . . . . . . . . . . . . . . . . 20, 21
Mini-Bike. . . . . . . . . . . . . . . . . . 40
Solid Steel. . . . . . . . . . . . . . . . . 21
Standard Steel Tubular . . . . . . . 20
Axle Nuts. . . . . . . . . . . . . . . . . 40, 49
Axle Sprockets. . . . . . . . . . 26, 27, 28
Azusalite Nylon Wheels . . . . . . . . 8, 9
B
“B” Type Sprockets. . . . . . . . . . . . 30
Bearings, Axle . . . . . . . . . . . . . . . . 22
Jackshaft. . . . . . . . . . . . . . . 14, 36
Rod End. . . . . . . . . . . . . 14, 15, 34
Wheel . . . . . . . . . . . . . . . . . 11, 14
Tapered Roller. . . . . . . . . . . 11, 14
Types. . . . . . . . . . . . . . . . . . . . . 11
Bearing Hangers . . . . . . . . . . . 22, 35
Bearing Kits. . . . . . . . . . . . . . . . . . 22
Bolts, Assorted . . . . . . . . . . . . . . . 49
Bolts w/Drilled Holes. . . . . . . . 10, 49
Bolt Kit for Spacers. . . . . . . . . . . . . 8
Brakes, 4-1/2” Azusa. . . . . . . . . . . 17
5” Azusa . . . . . . . . . . . . . . . . . . 18
6” Azusa . . . . . . . . . . . . . . . . . . 18
Band, 4”, 4-1/2” . . . . . . . . . . . . 16
Posi-Stop Disc. . . . . . . . . . . . . . 19
Brake Cables & Fittings . . . . . . 38, 39
Brake Drums. . . . . . . . . . . 16, 17, 18
Brake Drum & Sprocket Assy . . . . 17
Brake Drum Platform. . . . . . . . . . . . 8
Brake & Hub Assembly. . . . . . 17, 18
Brake Lever. . . . . . . . . . . . . . . . . . 39
Brake Line Fittings. . . . . . . . . . . . . 19
Brake Line, Hydraulic. . . . . . . . . . . 19
Brake Pedal. . . . . . . . . . . . . . . . . . 34
Brake Rods & Kits. . . . . . . . . . . . . 34
Brake Shoes. . . . . . . . . . . . 17, 18, 19
Brake Spacer. . . . . . . . . . . . . . . . . 18
Brass Fittings . . . . . . . . . . . . . . . . 19
Bucket Seats & Covers . . . . . . . . . 44
Bushings, Assorted. . . . . . . . . . . . 40
Bushing, Nyliner . . . . . . . . . . . 31, 40
C
“C” Type Sprockets. . . . . . . . . . . . 30
Cables & Cable Housing . . . . . 38, 39
Cable Fittings. . . . . . . . . . . . . . . . . 38
Cap Assy for Steering Wheels. . . . 33
Cap Screws. . . . . . . . . . . . . . . . . . 49
Chain & Chain Parts. . . . . . . . . . . . 23
(See also Roller Chain Broch.)
Chain Breakers. . . . . . . . . . . . . . . . 23
Chain Deflectors. . . . . . . . . . . . . . . 23
Clamps, Cable & Conduit. . . . . . . . 38
Tube Gripping. . . . . . . . . . . 38, 45
Clevises. . . . . . . . . . . . . . . . . . 34, 38
Clevis Pins. . . . . . . . . . . . . . . . . . . 34
Clips, Conduit . . . . . . . . . . . . . . . . 38
Split Sprocket. . . . . . . . . . . . . . 25
Clothing. . . . . . . . (see Racewear Broch.)
Clutches, Kart & Mini-Bike.. . . . . 42
Draggin Skin Racing. . . . . . . . . 42
Collars, Split Locking. . . . . . . . 36, 49
w/Set Screw . . . . . . . . . 33, 36, 49
Compression Fittings, Brass . . . . . 19
C
Conduit . . . . . . . . . . . . . . . . . 38, 39
Clamps & Clips. . . . . . . . . . . . . 38
Connecting Links, Chain . . . . . . . 23
Control Cables. . . . . . . . . . . . 38, 39
Control Rod Anchors. . . . . . . 34, 35
Controls, Throttle/Brake. . . . . 34, 39
Cotter Pins. . . . . . . . . . . . . . . . . . 49
D
Disc Brake, Posi Stop Mech.. . . . 19
Draggin-Skin Racing Clutch. . . . . 42
Drums, Brake. . . . . . . . . . 16, 17, 18
Drum & Hub Assemblies. . . . 17, 18
Drum & Sprocket Assemblies. 7, 17
E
Engine Mounting Plates. . . . . . . . 37
Engine Sprockets . . . . . . 26, 28, 30
F
Fenders. . . . . . . . . . . . . . . . . . . . 40
Fender Washers. . . . . . . . . . . . . . 37
Fittings, Brass. . . . . . . . . . . . . . . 19
Cable & Conduit . . . . . . . . . . . 38
Fuel Line & Tank. . . . . . . . . . . 37
Flangettes, Bearing . . . . . . . . 22, 36
Foot Pedals. . . . . . . . . . . . . . . . . 34
Foot Pegs. . . . . . . . . . . . . . . . . . . 45
Forks, Mini-Bike. . . . . . . . . . . . . . 46
Frames, Kart . . . . . . . . . . . . . . . . 47
Mini-Bike. . . . . . . . . . . . . . . . . 46
Fuel Line . . . . . . . . . . . . . . . . . . . 37
G
Go Kart, Components List. . . . . . 47
Frames . . . . . . . . . . . . . . . . . . 47
Kits. . . . . . . . . . . . . . . . . . . . . 48
Seats. . . . . . . . . . . . . . . . . . . . 44
Gloves, Racing. (See Racewear Broch.)
Grips, Throttle & Dummy . . . . . . 39
Grommets, Rubber . . . . . . . . . . . 37
K
Kill Button Switch . . . . . . . . . . . . 33
Kits, Kart & Mini-Bike . . . . . . . . . 48
L
Levers, Brake. . . . . . . . . . . . . . . . 39
Live Axles . . . . . . . . . . . . . . . 20, 21
Live Axle Bearing Kits. . . . . . . . . 22
Live Axle Hubs. . . . . . . . . 11, 24, 26
Locking Collars. . . . . . . . 33, 36, 49
Locknuts, Assorted. . . . . . . . . . . 49
Lug Nuts. . . . . . . . . . . . . . . . 10, 49
M
Mini Bike
Axles. . . . . . . . . . . . . . . . . . . . 40
Components List. . . . . . . . . . . 46
Forks & Frames. . . . . . . . . . . . 46
Kits. . . . . . . . . . . . . . . . . . . . . 48
Seats. . . . . . . . . . . . . . . . . . . . 45
Shock Absorbers. . . . . . . . . . . 41
Mini Hub, (Uni-Hub) . . . . . . . . . . 24
Motorcycle Sprockets . . . . . . 28, 29
Mount, Swing . . . . . . . . . . . . . . . 36
Mounting Plates, Engine. . . . . . . 37
N
Neck Collars. (See Racewear Broch.)
Nuts, Assorted. . . . . . . . . . . . . . . 49
Nyliner Insert Bushings. . . . . 31, 40
Nylon “Azusalite” Wheels . . . . . 8, 9
O
Offset Links, Chain . . . . . . . . . . . 23
P
Pants. . . . . . (See Racewear Broch.)
Pedals, Brake & Throttle. . . . . . . 34
Pitman Arms. . . . . . . . . . . . . 33, 35
Q
Quarter Midget Sprockets. . . . . . 28
R
H
Hardware, Assorted. . . . . . . . . . . 49
Helmet Cushion.(See Racewear Broch.)
Hex Nuts, Assorted. . . . . . . . . . . 49
Hex Nuts, Slotted. . . . . . . . . . 10, 49
Housing, Cable . . . . . . . . . . . . . . 38
Hubs, “A” Sprocket. . . . . . . . 24, 26
ATV Wheel Adapter. . . . . . . . . 11
Engine. . . . . . . . . . . . . . . . . . . 26
Live Axle. . . . . . . . . . . 11, 24, 26
Mini. . . . . . . . . . . . . . . . . . . . . 24
Steel . . . . . . . . . . . . . . . . . 24, 26
Steering Shaft. . . . . . . . . . . . . 33
Uni-. . . . . . . . . . . . . . . . . . . . . 24
Vari- . . . . . . . . . . . . . . . . . . . . 24
Hydraulic Brake Line & Fittings. . 19
Hydraulic Shock Absorbers. . . . . 41
I
Idler/Tensioner Sprockets . . . . . . 29
Inner Tubes. . . . . . . . . . . . . . 12, 13
J
Jackets. . . . . . . (see Racewear Broch.)
Jackshafts & Kits. . . . . . . . . . . . . 36
Jackshaft Sprockets. . . . . . . . 30, 36
Jamnuts . . . . . . . . . . 14, 34, 40, 49
K
Kart, Components List. . . . . . . . . 47
Frames . . . . . . . . . . . . . . . . . . 47
Kits. . . . . . . . . . . . . . . . . . . . . 48
Seats . . . . . . . . . . . . . . . . . . . 44
Keys & Keystock. . . . . . . . . . . . . 49
Kickstand. . . . . . . . . . . . . . . . . . . 40
Racewear. . . . . (See Racewear Broch.)
Ribtect Products. . . . . . . . . . . . . 43
Rod Ends. . . . . . . . . . . . . 14, 15, 34
Rods, Brake & Throttle . . . . . . . . 34
Tie. . . . . . . . . . . . . . . . . . . . . . 15
Roller Chain. . . . . . . . . . . . . . . . . 23
(See also Roller Chain Broch.)
Rubber Grommet Kit. . . . . . . . . . 37
S
Safety Nuts & Bolts. . . . . . . . . . . 10
Screws, Assorted. . . . . . . . . . . . . 49
Seats, Kart. . . . . . . . . . . . . . . . . . 44
Mini-Bike. . . . . . . . . . . . . . . . . 45
Seat Covers, Kart. . . . . . . . . . . . . 44
Set Screws. . . . . . . . . . . . . . . . . . 49
Shafts, Steering. . . . . . . . . . . . . . 33
Shock Absorbers. . . . . . . . . . . . . 41
Shoes, Kart . . . (See Racewear Broch.)
Slotted Nuts. . . . . . . . . . . . . . 10, 49
Snap Rings . . . . . . . . . . . . . . 33, 49
Socket Head Cap Screws. . . . . . . 49
Spacers, Assorted. . . . . . . . . . . . 40
Brake. . . . . . . . . . . . . . . . . . . . 18
Spindle, Nylon. . . . . . . . . . . . . 31
Wheel . . . . . . . . . . . . . . . . . . . . 8
Spindle Brackets. . . . . . . . . . 31, 35
Spindles, Kits & Components. . 31, 35
Split Locking Collars. . . . . . . 36, 49
Springs, Compression. . . . . . 34, 38
Brake. . . . . . . . . . . . . . . . . . 17,18
Sprocket & Drum Assys . . . . . . . 17
Sprocket Guards. . . . . . . . . . . . . 27
S
Sprocket Holder, Heavy Duty. . . . 26
Sprocket Hub, Steel. . . . . . . . . . . 26
Sprockets:
“A” Type . . . . . . . . . . . . . . . 26-29
“B” Type . . . . . . . . . . . . . . . . . 30
“C” Type . . . . . . . . . . . . . . . . . 30
Aluminum. . . . . . . . . . . . . . 24-29
Tru-A-Line, #35 . . . . . . 24, 25
Tuf-N-Tru, #35 . . . . . . . . . . 25
Tru-N-Fine, #219. . . . . . . . . 25
Blank. . . . . . . . . . . . . . . . . . . . 29
Heavy Duty. . . . . . . . . . . . . 26-28
Idler/Tensioner . . . . . . . . . . . . 29
Jumbo XNT. . . . . . . . . . . . . . . 25
Mini Aluminum. . . . . . . . . . . . 24
Motorcycle . . . . . . . . . . . . . . . 29
Quarter Midget . . . . . . . . . . . . 28
Shifter. . . . . . . . . . . . . . . . . . . 28
Specialty. . . . . . . . . . . . . . . 26-28
Stamped Steel. . . . . . . . . . . . . 27
Steel Wheels. . . . . . . . . . . . . . . . . 7
Steering Shaft & Hub Assy/Kits. . 33
Steering Wheels
Butterfly . . . . . . . . . . . . . . . . . 32
Round. . . . . . . . . . . . . . . . . . . 32
Steering Wheel Cap Assembly. . . 33
Suits . . . . . . (See Racewear Broch.)
Swing Mount Kit. . . . . . . . . . . . . 36
Switch, Kill Button. . . . . . . . . . . . 33
T
“T” Fitting, Delrin®. . . . . . . . . . . 37
Tank Fittings . . . . . . . . . . . . . . . . 37
Tapered Roller Bearings. . . . . 11, 14
Throttle Controls. . . . . . . . . . 34, 39
Throttle Pedal . . . . . . . . . . . . . . . 34
Throttle Rods & Kits. . . . . . . . . . 34
Tie Rods & Tie Rod Kits . . . . . . . 15
Tire Mounting Safety... . . . . . . 13
Tires:
Bridgestone/Firestone. . . . . . . 43
Ribbed & Sawtooth. . . . . . . . . 13
Slicks & Turf Saver. . . . . . . . . 12
Studded, Knobby & Universal. 13
Tire Tread Patterns . . . . . . . . . . . . 4
Trailer Wheels.. . . . . . . . . . 7
Twist Grip Assemblies. . . . . . . . . 39
Tubes, Inner. . . . . . . . . . . . . . 12, 13
U
Uni-Hub . . . . . . . . . . . . . . . . . . . 24
V
Valves, Fuel. . . . . . . . . . . . . . . . . 37
Vari-Hub & Components. . . . . . . 24
W
Washers. . . . . . . . . . . . . . . . . 37, 49
Weldments. . . . . . . . . . . . . . . . . . 35
Wheels
Aluminum. . . . . . . . . . . . . 4, 5, 6
ATV. . . . . . . . . . . . . . . . . . . . . . 7
Azusalite Nylon. . . . . . . . . . . 8, 9
Steel . . . . . . . . . . . . . . . . . . . . . 7
Trailer . . . . . . . . . . . . . . . . . . . . 7
Wheel Bearings. . . . . . . . . . . . . . 14
Types. . . . . . . . . . . . . . . . . . . . 11
Wheel/Drum/Spkt Assemblies. . . . 17
Wheel Hubs. . . . . . . . . . . . . . . . . 11
Wheel Spacers & Bolt Kit . . . . . . . 8
Wheel Specifications. . . . . . . . . . 10
Wheel Weights. . . . . . . . . . . . . . . . 5
X, Y & Z
XNT “Jumbo” Sprockets. . . . . . . 25
“Y” Fitting, Delrin®. . . . . . . . . . . 37
Zytel® Nylon Wheels. . . . . . . . . 8, 9
Page 3
308
Alloy
m
u
n
i
Alum ls 5 inc h
Whee
AZUSA’S FIVE INCH “TRI-STAR” ALUMINUM WHEELS
 Bead-Biting Edges Prevent Slipping
� Split Rim for Easy Tire Mounting
 Beautiful Ball-Burnished Finish
 3.75" Bolt Circle
5" ALUMINUM TRI STAR WHEELS - 3" Wide
BALL BEARING WHEEL
Part No.
With 5⁄8" ID Precision Ball Bearings
With 5⁄8" ID Standard Ball Bearings
3⁄4" ID Standard Ball Bearings
Two Halves w/Nuts & Bolts Only
With 3/4" ID Sealed Ball Bearings
One Half Only
1144
1146 With
1148
1145
1141
8053
TAPERED ROLLER BEARING WHEEL
With 5/8" ID Sealed Tapered Roller Bearing
With 3/4" ID Sealed Tapered Roller Bearing
With 3⁄4" ID Tapered Roller Bearing*
With 5⁄8" ID Tapered Roller Bearing*
With Races, Nuts & Bolts Only
Two Halves w/Nuts & Bolts Only
One Half Only
*Dust shields provided
See pages 12 & 13
for Tire & Tube Part
Numbers
1135
1136
1137
1138
1139
1142
8052
LIVE AXLE WHEEL
With Steel Insert-1" to 3⁄4" Step
Half w/Steel Insert 1" ID, 1⁄4" Keyway
With (2) 8054 Halves-Complete
Half with 3⁄4" Bore
1147
8054
1149
8052
x 5
Regular Slick
340/300 x 5
Sawtooth
Narrow Slick
Regular Slick
See page 10 for Complete
Wheel Dimensions
410/350 x 5
Sawtooth
Studded
Regular Slick
Universal
See page 8 for 5" Wheel
Spacers & Accessories
11-360
x 5
Heavy Duty Slick
Ribbed
Turf
Knobby
Narrow
Studded Slick
Saw
Tooth
Ribbed
Page 4
308
10-450
TIRE TREAD PATTERNS
Turf
TIRES TO FIT 5"
TRI-STAR WHEELS
Regular
Slick
11-400
x 5
11-450
x 5
Regular Slick
12-400
x 5
Heavy Duty Slick
Scooter
Universal
AZUSA’S SIX INCH “TRI-STAR” ALUMINUM WHEELS





Alloy
m
u
n
i
Alum l s 6 i n c h
Whee
3.75” Bolt Circle
Three Widths Available
Beautiful Ball-Burnished Finish
Bead Biting Edges Prevent Slipping
Split-Rim Design for Easy Tire Mounting
6” ALUMINUM TRI STAR WHEELS
BALL BEARING WHEELS
3" Wide 3.5" Wide
With 5/8" ID Precision Ball Bearings
With 5/8" ID Standard Ball Bearings
With 3/4" ID Standard Ball Bearings
With 3/4" ID Sealed Ball Bearings
Two Halves with Nuts & Bolts Only
One Half Only - 1-1/2" Wide
One Half Only - 2" Wide
1193
1194
1195
1132
1192
8001
—
1197
1198
1199
1133
1196
—
—
TAPERED ROLLER BEARING WHEELS (TRB)
4" Wide
1125
1126
1127
1122
1124
—
8014
4" Wide
With 5/8" ID Sealed Tapered Roller Bearing
With 3/4" ID Sealed Tapered Roller Bearing
With 3/4" ID Tapered Roller Bearing*
With 5/8" ID Tapered Roller Bearing*
With Races, Nuts & Bolts Only
Two Halves with Nuts & Bolts Only
One Half Only
1104
1105
1106
1107
1108
1123
8011
6" x 3"
6" x 3-1/2"
6" x 4"
*Dust shields provided
LIVE AXLE WHEELS
4" Wide
With Steel Insert - 1" to 3/4" Step
Half with Steel Insert 1" ID, 1/4" Keyway
Half with 3/4" Bore
See page 10 for Complete Wheel Dimensions
1117
8009
8011
TIRES TO FIT 6" TRI-STAR WHEELS
3" & 3-1/2" WIDE “TRI STAR” WHEEL
410/350 x 6
Sawtooth
Studded
Regular Slick
Universal
Scooter
13-400 x 6
Ribbed
Heavy Duty Slick
See pages 12 & 13 for
Tire & Tube Part Numbers
4" WIDE “TRI STAR” WHEEL
410/350 x 6
530/450 x 6
12-600 x 6
13-400 x 6
13-500 x 6
13-650 x 6
15-600 x 6
Sawtooth
Studded
Regular Slick
Universal
Scooter
Sawtooth
Studded
Universal
Regular Slick
Ribbed
Heavy Duty Slick
Ribbed
Turf
Slick
Ribbed
Turf
Slick
Ribbed
Turf
AZUSA WHEELS WEIGHTS
 Self bonding, Indy Car Tested
 24 Weights, 4 Bars Per Pack
 1/4 Ounce Segments
 Buy Bulk and Save
1 Ft. - 1/4 ounce weights - Packaged
1 Ft. - 1/4 ounce weights - Bulk (uncut)
1820
1819
Page 5
308
lloy
A
m
u
n
Alumi heels
W
AZUSA’S 8" INCH TRI-STAR
WHEELS - 3" WIDE
 Attach Azusa 4-1/2” Brake Drums
 Ball & Roller Bearing Styles
 Bright Ball-Burnished Finish
 Split-Rim for Easy Tire Mounting
TIRES TO FIT 8"
TRI-STAR WHEELS
8" BALL BEARING WHEELS
410/350 x 8
Ribbed
480/400 x 8
Ribbed
Sawtooth
Slick
14-300 x 8
Ribbed
With 5/8" Precision Ball Bearing
With 5/8" Standard Ball Bearing
With 3/4" Sealed Ball Bearing
With 3/4" Standard Ball Bearing
One Half Only - Ball Bearing Style
See pages 12 & 13 for Tire & Tube Part Nos.
With 5/8" Sealed Tapered Roller Bearing*
With 5/8" Tapered Roller Bearing*
With 3/4" Sealed Tapered Roller Bearing
With 3/4" Tapered Roller Bearing
One-Half Only, Tapered Roller Bearing Style
See page 10 for Complete Wheel Dimensions
CUSTOM ALUMINUM WHEELS
THE 6" “ASTRO”
1152
1153
1151
1154
8023
8" TAPERED ROLLER BEARING WHEELS
 Burnished Aluminum Finish
 Choice of Bearing Styles
 Split-Rim Assembly
*Dust Shield Provided
THE 8"
“SPINNER”
TIRES TO FIT 6"
ASTRO WHEELS
410/350 x 6 6" “ASTRO” WHEEL (3" WIDE)
With 5/8" Precision Ball Bearings
With 5/8" Standard Ball Bearings
With 3/4" Sealed Ball Bearings
With 3/4" Standard Ball Bearings
Two Halves w/Nuts & Bolts Only
One Wheel Half Only
1128
1129
1121
1130
1131
8003
See page 10 for Complete Wheel Dimensions
13-400
x 6 Sawtooth
Studded
Regular Slick
Universal
Scooter
Ribbed
Heavy Duty Slick
TIRES TO FIT 8"
SPINNER WHEELS
410/350 x 8 Ribbed
480/400 x 8 Sawtooth
Ribbed
Slick
14-300
x 8 Ribbed
8" “SPINNER” WHEEL (3" WIDE)
With 5/8" Precision Ball Bearings
With 5/8" Standard Ball Bearings
With 3/4" Sealed Ball Bearings
With 3/4" Standard Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only - Side 1*
One Half Only - Side 2*
Page 6
308
1175
1176
1179
1177
1178
8021
8020
*part no. is stamped inside each wheel half
See page 10 for Complete Wheel Dimensions
See pages 12 & 13 for Tire & Tube Part Nos.
1112
1114
1113
1112
8024
MULTI-PURPOSE STEEL WHEELS
heel
W
L
E
E
ST
 Three Sizes: 4", 5" & 6" O.D.
 Two Hub Types:
s
...1" Live Axle,1/4" Keyway


...3/4" Ball Bearing, Grease Fitting
Split-Rim for Easy Tire Mounting
Most all 4", 5" & 6" Tire Styles
4", 5" & 6" WHEEL DESCRIPTIONS
PART NO.
4" Steel Wheel, 2 halves & 1" Live Axle Hub
4" Steel Wheel, 2 halves & 3/4" Ball Bearing Hub
5" Steel Wheel, 2 halves & 1" Live Axle Hub
5" Steel Wheel, 2 halves & 3/4" Ball Bearing Hub
6" Steel Wheel, 2 halves & 1" Live Axle Hub
6" Steel Wheel, 2 halves & 3/4" Ball Bearing Hub
See page 10 for Complete Wheel Dimensions
1030
1031
1032
1033
1034
1035
HUBS ALSO SOLD
SEPARATELY
See pages 12 & 13 for Tire & Tube Part Nos.
THE AZUSA “TEN-INCHER” STEEL WHEEL
 For 350 x10 & 250 x10 Tires
 Chrome Plating
 Split-Rim for Easy Tire Mounting
Black Oxide
Less Bearings
DESCRIPTION
Black Oxide w/
Plated
Plated, w/
Prec. Bearings Less Bearings Precision Bearings
Basic Wheel
10101
10121
10131
Wheel w/Brake Drum
10102
10122
10132
10123
10133
Wheel w/Brake Flanged Drum
10103
10104
10124
10134
Wheel w/#35* Sprocket & Drum - 60 tooth
Wheel w/#35* Sprocket & Drum - 72 tooth
10105
10125
10135
*If you prefer #40/41 chain, we can quote and supply sprockets for #40/41 chain, 40 through 72 tooth.
10151
10152
10153
10154
10155
See page 10 for Complete Wheel Dimensions
 One Piece, 2-3/4" Bore
 Four 1/2" Bolt Holes
STEEL BEARING
WHEELS


On 4" Circle
ATV & TRAILER
STEEL
WHEELS
 3/4" Ball Bearing
One Piece, Bearing-Hub
White Gloss-Enamel Finish
 Welded Hubs Fit 1-3/8" OD Bearings
DIAMETER
WIDTH
HUB LENGTH
PART
WHEEL SIZE
4"
6"
6"
8"
2.5"
3.5"
4.5"
3.5"
3"
3"
3"
4"
1022
1025
1026
1028
8" Diameter x 3-3/4" Wide
8" Diameter x 5-3/8" Wide
8" Diameter x 7" Wide
8" Diameter x 9" Wide
PART NO.
1010
1004
1005
1006
Page 7
308
Nylon

l
e
t
Zy
ls
Whee
 Three Widths
 Live Axle Model
 3.75" Bolt Circle
5" AZUSALITE WHEELS
See page 10 for
Complete Wheel
Dimensions
For 1-3/8" OD Ball Bearings
With 5/8" ID Prec Ball Bearings
With 5/8" ID Std Ball Bearings
With 3/4" ID Std Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only w/Valve Hole
One Half Only w/o Valve Hole
3" Wide
1057
1058
1068
1048
7909
7910
3-1/2" Wide
1061
1062
1069
1049
7909 or 7913
7910 or 7914
4" Wide
1065
1066
1070
1042
7913
7914
For 1-5/8" OD Ball Bearings
With 3/4" ID Prec Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only w/Valve Hole
One Half Only w/o Valve Hole
1059
1060
7911
7912
—
—
—
—
—
—
—
—
For 1" Live Axles
With Steel Insert - 1" to 3/4" Step
Half with Steel Insert 1" ID, 1/4" Keyway
Half with 3/4” Bore & Valve Hole
—
—
7908
1064
—
—
1067
7916
7915
TIRES TO FIT 5" AZUSALITE WHEELS
TIRE SIZE 11-360
See pages 12 & 13 for
Tire & Tube Part Nos.
WHEEL SPACERS
FOR 5" ALUMINUM WHEELS
TREAD
x
5
340/300 x
5
10-450
x
5
410/350 x
5
11-400
x
5
11-450
12-400
x
x
5
5
SPACER BOLT & NUT KITS
Heavy Duty Slick
Sawtooth
Narrow Slick
Regular Slick
Regular Slick
Sawtooth
Studded
Regular Slick
Universal
Turf-Saver
Ribbed
Regular Slick
Heavy Duty Slick
3"
3.5"
4"
































BRAKE DRUM PLATFORM FOR
5" AZUSALITE WHEELS
 Grade 5 Hardware  3.75" Bolt Circle
 2.10" Ring
 For 2 Spacers
Diameter
 Cast
Aluminum
Wheel Spacer, 1/2" Wide
Wheel Spacer, 1" Wide
Wheel Spacer, 1-1/2" Wide
Wheel Spacer, 2" Wide
1158
1159
1160
1161
Bolt Kit for 1/2" Spacers
Bolt Kit for 1" Spacers
Bolt Kit for 1-1/2" Spacers
Bolt Kit for 2" Spacers
Page 8
308
1162
1163
1164
1165
 1" Platform Height
Brake Platform
Platform w/Nuts & Bolts
2259
2259A
ylon
N

l
e
Zyt
ls
Whee
4" AZUSALITE WHEELS




Corrosion-Proof, Solvent Resistant
Tough and Lightweight
4" AZUSALITE WHEELS
Split-Rim Design
2.92" Bolt Circle
See page 10
for Complete
Wheel Dimensions
For 1-3/8" OD BALL BEARINGS
3" WIDE
With 1/2" Precision Ball Bearings
With 1/2" Standard Ball Bearings
With 5/8" Precision Ball Bearings
With 5/8" Standard Ball Bearings
With 3/4" Standard Ball Bearings
With 3/4" Sealed Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only
1051
1055
1053
1054
1041
1052
1050
7900
TIRES FOR 4" AZUSALITE WHEELS
TIRE SIZE
280/250 x 4
9-350 x 4
What is Zytel® Nylon?
Zytel® is a name trademarked by Dupont Corporation for its
series of nylon resins. Azusalite Wheels are molded from a
glass-reinforced, alpha-crystalline, Nylon 6 resin, designed
to provide an optimal combination of tensile, impact and
flexural strengths. The resin is enhanced by carbon black for
the best UV protection. The resulting Azusalite wheels are
strong, resilient and durable.
See pages 12 &
13 for Tire &
Tube Part Nos.
410/350 x 4
10-300 x 4
300 x 4
TREAD
Sawtooth
Regular Slick
Sawtooth
Studded
Regular Slick
Turf
Universal
Ribbed
Turf
6" AZUSALITE WHEELS



3.75" Bolt Circle
Tough and Lightweight
Split-Rim Design For Easy Mounting
6" AZUSALITE WHEELS
For 1-3/8" OD Ball Bearings
3" Wide
With 5/8" ID Prec Ball Bearings
With 5/8" ID Std Ball Bearings
With 3/4" ID Std Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only
1072
1073
1078
1075
7921
For 1-5/8" OD Ball Bearings
3" Wide
With 3/4" ID Prec Ball Bearings
Two Halves w/Nuts & Bolts Only
One Half Only
1077
1075
7921
See page 10 for Complete Wheel Dimensions
TIRES TO FIT 6" AZUSALITE WHEELS
TIRE SIZE
TREAD
410/350 x 6
13-400 x 6
13-500 x 6
530/450 x 6
Sawtooth
Studded
Regular Slick
Universal
Ribbed
Ribbed
Turf
Slick
Universal
Studded
See pages 12 & 13 for Tire & Tube Part Nos.
Page 9
308
W h eel
ions
t
a
c
i
f
i
Spec
Aluminum Wheels
Tire
Size
Bead
Width
Maximum Wheel
Width Diameter
Hub
Width
Weight
(Nominal)
T
B
w
d
h
LBS.
5"
5"
5"
3.12"
3.12"
3.12"
3.70"
3.70"
3.70"
6.00"
6.00"
6.00"
2.90"
2.90"
2.90"
2.4
2.4
2.4
6"
6"
6"
6"
6"
2.75"
3.37"
4.00"
4.00"
4.00"
3.25"
3.88"
4.50"
4.50"
4.50"
7.12"
7.12"
7.12"
7.12"
7.12"
1.95"
2.62"
3.25"
3.25"
3.25"
2.1
2.6
3.2
3.7
3.6
6"
3.00"
3.50"
7.12"
3.00"
2.1
8"
8"
3.00"
3.00"
3.62"
3.62"
9.00"
9.00"
2.50"
2.50"
3.7
3.7
8"
3.00"
3.50"
9.00"
3.00"
2.5
t
b
w
d
h
LBS.
4"
2.75"
3.25"
5.00"
1.50"
0.55
5"
5"
5"
5"
5"
5"
3.00"
3.60"
4.20"
3.00"
4.20"
3.60"
3.40"
4.00"
4.60"
3.40"
4.60"
4.10"
6.12"
6.12"
6.12"
6.12"
6.12"
6.12"
1.50"
1.50"
1.50"
1.75"
2.10"
1.95"
0.86
1.0
1.1
0.86
1.32
1.31
6"
6"
2.75"
2.75"
3.25"
3.25"
7.12"
7.12"
3.25"
3.25"
1.2
1.2
t
b
w
d
h
LBS.
4"
4"
2.25"
2.25"
2.75"
2.75"
5.00"
5.00"
2.50"
2.75"
1.85
2.20
5"
5"
2.625"
2.625"
3.50"
3.50"
6.25"
6.375"
2.50"
2.75"
2.95
3.35
4"
4"
2.25"
2.25"
2.75"
2.75"
5.00"
5.00"
2.50"
2.50"
3.40
3.75
10"
2.25"
2.75"
5.00"
2.50"
5.2
5" Tri Star
For Ball Bearings (1-3/8 OD)
For Live Axle
For Tapered Roller Bearings
6" Tri Star

QUALITY LUG NUTS
Zinc Plated
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-3/8 OD)
For Live Axle
For Tapered Roller Bearings
6" “ASTRO”
For Ball Bearings (1-3/8 OD)
8" Tri Star
For Ball Bearings (1-3/8 OD)
For Tapered Roller Bearings
Lug Nuts 1/2-20, each
8532
8" “SPINNER”
For Ball Bearings (1-3/8 OD)
SLOTTED HEX NUTS
 Grade 5
size
part
1/4-28
5/16-24
3/8-24
1/2-20
5/8-18
5/8-18 Thin
3/4-16
8527
8535
8536
8528
8521
8518
8511
Azusalite Wheels
4" NYLON


BOLTS WITH HOLES
Grade 5
Hole Drilled 3/32" from End
for Safety Wire or Cotter Pin
For Ball Bearings (1-3/8 OD)
5" NYLON
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-5/8 OD)
For Live Axle
For Live Axle
6" NYLON
For Ball Bearings (1-3/8 OD)
For Ball Bearings (1-5/8 OD)
Steel Wheels
4" MULTI-PURPOSE
size
part
1/4-28 x 3/4
1/4-28 x 7/8
8412
8423
5/16-24 x 1-1/4
5/16-24 x 2
5/16-24 x 2-1/4
5/16-24 x 3-1/2
8414
8486
8485
8428
6" MULTI-PURPOSE
3/8-24 x 1-3/4
3/8-24 x 2-1/4
3/8-24 x 4
8481
8482
8473
10" TEN-INCH
For Ball Bearings
For Live Axle
5" MULTI-PURPOSE
For Ball Bearings
For Live Axle
For Ball Bearings
For Live Axle
For Ball Bearings (1-3/8 OD)
Page 10
308
PLATED STEEL ADAPTER HUBS...
u b ss
h
R
E
e
T
A D ABPe a r i n g T y p
and
 1/2-20 x 1-1/4" Welded Studs
 4" Bolt Circle
 Lug Nuts Included
 Bright Zinc Plated
 Bearing Hub, 3-5/8" Long
...With Tapered Roller Bearings!
Adapter Hub with 5/8" ID TRB
Adapter Hub with 3/4" ID TRB
Adapter Hub, 5/8" Sealed TRB
Adapter Hub, 3/4" Sealed TRB
Adapter Hub, less Cup & Cone
2299
2298
2292
2295
2297
...With Keyway For Live Axle!*
2-3/4"
...With Sealed Precision
Ball Bearings!
1/4" Keyway
5"
3/4"
2-1/4"
1"
2" R
Adapter Hub - 1" Live Axle (Stepped)
2282
Adapter Hub - 1" Live Axle (No Step)
2289
Adapter Hub with 3/4" ID Bearing
2296
1/2-20 x 1-1/4, 4 ea.
*Stepped to 3/4" Shown
Four Bolt Adapter Plate
Originally designed for use with Honda ATC
90s, this versatile adapter plate is suitable for
a variety of applications. It has a 4-7/8" OD,
a 1-5/16" bore, three 5/16" diameter bolt
holes on a 1-3/4" bolt circle and comes
with four 1/2-20 zinc plated lug nuts.
Four Bolt Adapter Plate
2283
WHEEL BEARING TYPES
(See page 14 for part nos. and descriptions)
1-3/8" od WHEEL bearings - Precision, standard & Ground sealed
Precision Sealed Bearings are available with a 5/8" bore. With double seals, the precision
ground and hardened components are good for high speeds and heavy duty applications.
Ground Sealed Bearings have a machined housing and a flanged outer race. Their unique inner
race construction accomodates a 3/4" bore and 1-3/8" OD unavailable in a precision bearing.
Standard Bearings are available with 3/4", 5/8" and 1/2" bores. They have an integral
metal seal within a stamped steel housing and are used for moderate speeds with light to
medium loads.
1-5/8" od Wheel bearing - Precision
This bearing has an ID of 3/4", is sealed, has a hardened and ground raceway, and is
an excellent alternative to the more expensive sealed Tapered Roller Bearing. Same top
quality as our 5/8" ID precision bearing.
tapered roller bearings (trb) Sealed or with dust shield
Tapered Roller Bearings, used for more strenuous applications, employ a Cup (Race)
pressed into the wheel, a Cone (Bearing) and, for the non-sealed type only, a Dust Shield.
TRBs have a bore of 3/4" but can be reduced to 5/8".
The Sealed TRB provides protection from the elements over and above that offered by the
non-sealed type with Dust Shield. When you purchase Azusa Wheels with a non-sealed
bearing, Dust Shields are provided.
Page 11
308
S l i c ks
&
f
tur and Tube
Tires
TURF TIRES
SIZE
9-350 x 4
300 x 4
410/350 x 4
11-400 x 5
13-500 x 6
13-650 x 6
15-600 x 6
16-650 x 8
18-850 x 8
18-950 x 8
SIZE
TIRE
8-300 x 4
9-350 x 4
410/350 x 4
10-450 x 5
11-360 x 5H
11-450 x 5
11-600 x 5C
11-600 x 5
11-600 x 5
11-710 x 5
340/300 x 5N
340/300 x 5
410/350 x 5
12-400 x 5H
12-600 x 6
13-400 x 6H
13-500 x 6
13-650 x 6
410/350 x 6
18-950 x 8
480/400 x 8
7097
7090
7041
7060
7094
7016-2
7092-2
7061
7093
7062
7045
7042
7043
7095
7017-2
7096
7065
7066
7044
7019
7004-2
N - Narrow
PLY
WIDTH*
4
4
4
4
4
2
2
4
4
4
4
4
4
4
2
4
4
4
4
4
2
3.0"
3.5"
3.5"
5.0"
3.6"
4.2"
5.3"
6.25"
6.25"
8.0"
2.5"
3.5"
3.5"
4.0"
6.0"
4.0"
4.4"
6.0"
3.5"
9.5"
4.6"
C - Carlisle Super Slick
* Tire Width & OD
PLY
WIDTH*
OD*
INNERTUBE
4
4
2
4
4
4
4
4
2
4
3.5"
3.0"
3.5"
4.0"
4.4"
6.0"
6.1"
6.4"
8.0"
9.0"
8.5"
10.0"
10.3"
10.7"
12.8"
12.5"
14.8"
16.4"
17.0"
17.5"
7128
7128
7130
7131
7133
7141
7125
7118
7120
7120
SLICKS
OD* INNERTUBE
7.8"
8.0"
10.5"
9.5"
11.0"
10.5"
10.5"
11.0"
11.0"
10.5"
10.8"
10.8"
11.5"
12.0"
11.8"
13.0"
11.5"
11.5"
12.6"
15.5"
16.3"
TIRE
7053
7072
7057-2
7047
7049
7052
7048
7015
7026-2
7028
7128
7128
7130
7131
7131
7132
7116
7116
7116
7116
7131
7131
7132
7132
7127
7133
7133
7141
7133
7120
7121
H - Heavy Duty (Concession Kart)
are nominal.
For
Racing Slicks & Rain Tires, see page 43
INNER TUBES
**indicates straight stem. All
other tube stems are bent.
Page 12
SIZE
PART
SIZE
PART
SIZE
PART
200 x 50
6 x 1.25
8 x 1.25
10 x 2**
280/250 x 4
300 x 4
410/350 x 4
340/300 x 5
410/350 x 5
11-400 x 5
7143
7152
7150
7151
7129
7128
7130
7131
7132
7135
11-600 x 5
410/350 x 6
410/350 x 6**
12-600 x 6
13-500 x 6
13-500 x 6**
13-650 x 6**
530/450 x 6
15-600 x 6
15-600 x 6**
145/70 x 6
7116
7133
7144
7127
7136
7122
7141
7134
7125
7125-S
7140
800 x 6
16-800 x 7**
325/350 x 8**
480/400 x 8
480/400 x 8**
16-650/750 x 8**
18-850/950 x 8**
250x10**
325/350 x 10**
20.5-800 x 10**
7138
7119
7123
7124
7121
7118
7120
7126
7137
7142
Due to the conditions under which they may be operated, no warranties
of any kind, express or implied, are made as to any tires or tubes.
308
C = Carlisle
OOTH
T
W
A
D, S
Tires
R IBBdEd e d , e t c . ,
Stu
RIBBED,
Round Profile
RIBBED, Flat
Profile
siZE
TIRE
11-400 x 5
11-400 x 5
11-400 x 5
13-500 x 6
13-500 x 6
13-500 x 6C
13-650 x 6
15-600 x 6
15-600 x 6
15-600 x 6C
800 x 6
16-650 x 8
18-850 x 8
18-950 x 8
7164
7046
7046-8
7168
7018
7087
7031
7169
7050
7088
7007
7024-2
7002
7027
PLY
WIDTH
OD*
INNERTUBE
2
4
8
2
4
4
4
2
4
4
4
2
4
4
3.2"
3.9"
3.2"
4.8"
4.8"
4.8"
6.0"
5.9"
5.9"
6.0"
8.0"
6.4"
8.0"
8.0"
10.5"
10.5"
10.8"
12.6"
12.6"
12.6"
12.5"
14.8"
14.8"
15.0"
16.0"
16.4"
16.5"
17.4"
7131
7131
7131
7133
7133
7133
7141
7125
7125
7125
7138
7118
7120
7120
size
200 x 50
10-300 x 4
13-400 x 6
13-400 x 6
14-300 x 8
410/350 x 8
480/400 x 8
tire
ply
width*
od*
innertube
7073
7014
7011-2
7005
7008-2
7003-2
7012
2
4
2
4
2
2
4
2.1"
3.2"
4.1"
4.1"
3.2"
3.5"
4.6"
7.5"
10.0"
13.0"
13.0"
14.0"
15.3"
16.3"
7143
7128
7133
7133
7123
7123
7121
SAWTOOTH
Size
Tread
Tire
Ply
Width*
OD*
Innertube
200 x 50
300 x 4
410/350 x 4
410/350 x 4
410/350 x 5
410/350 x 5
410/350 x 6
410/350 x 6
410/350 x 6
530/450 x 6
530/450 x 6
145-70 x 6
16-800 x 7
480/400 x 8
16-650 x 8
18-950 x 8
20-700 x 8
22-11.00 x 8
250/275 x 10
350 x 10
350 x 10
STUD
SCOOT
STUD
UNIV
STUD
UNIV
STUD
UNIV
SCOOT
STUD
UNIV
KNOB
KNOB
STUD
KNOB
KNOB
KNOB
KNOB
UNIV
STUD
UNIV
7073
7077
7032
7078
7033
7074
7034
7075
7059
7058
7040
1222
7022
7054
7023
1228
1226
1225
7020
7009
7013
4
4
4
4
4
4
4
4
4
4
4
2
4
4
2
2
2
2
4
4
4
2.1"
3.2"
3.5"
3.5"
3.5"
3.5"
4.0"
4.0"
4.0"
5.3"
5.3"
6.0"
7.4"
4.6"
6.4"
8.5"
7.2"
9.0"
2.5"
3.7"
3.7"
7.5"
10.5"
10.5"
10.5"
11.5"
11.5"
12.5"
12.5"
12.5"
14.7"
14.7"
14.2"
16.0"
16.0"
16.4"
17.3"
20.0"
22.0"
15.3"
17.5"
17.5"
7143
7128
7130
7130
7132
7132
7133
7133
7133
7134
7134
7140
7119
7121
7118
7120
7120
7120
7126
7137
7137
SIZE
TIRE
280/250 x 4
410/350 x 4
340/300 x 5
410/350 x 5
410/350 x 6
530/450 x 6
480/400 x 8
7035
7036
7038
7037
7039
7051
7010-2
PLY
WIDTH*
OD*
INNERTUBE
4
4
4
4
4
4
2
2.8"
3.5"
3.5"
3.5"
4.0"
5.3"
4.6"
8.8"
10.5"
10.5"
11.5"
12.5"
14.7"
16.0"
7129
7130
7131
7132
7133
7134
7121
UNIVERSAL, STUDDED
“SCOOTER” & KNOBBY
Additonal ATV tires available
* Tire Width & OD
are nominal.
TIRE MOUNTING & INFLATION SAFETY PRECAUTIONS
WARNING!
these are not automotive wheels and tires. Extra inflation precautions are required! 1. Inspect wheel for any service damage before mounting
tire. 2. Lubricate tire beads and wheels rims with approved tire lubricant 3. use regulated pressure with an extension hose and in-line gauge. 4.
Use safety glasses and a safety cage, or other containment device for the tire/wheel assembly. do not expose any unprotected portion of your
body to the tire/wheel assembly while inflating. 5. Never Pry against a cast aluminum or Nylon wheel rim. 6. do not pop the bead onto the rim. 7.
On reaching 25 psi pressure, if tire is not yet seated, stop, and deflate completely. Then disassemble, relubricate and hand seat the tire onto the rim
before reinflating the tire.
Page 13
308
NGS
d
B E AeRr I& R o d E n
oll
Ball, R
PRECISION SEALED BALL BEARINGS
ID
3/8"
12mm
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
1"
1-1/4"
OD
THICKNESS
7/8"
32mm
1-1/8"
1-3/8"
1-3/8" 1-3/8" 35mm
1-5/8"
1-5/8" 40mm
1-5/8"
2"
2-1/4"
9/32"
11mm
3/8"
7/16"
7/16"
7/16"
11mm
1/2"
7/16"
12mm
7/16"
1/2"
1/2"
PART
8225
8224
8253
8203
8206
8205 *
8267
8268
8273 ‡
8254
8219
8207
8202
‡with Flange
*with Snap Ring
STANDARD BALL BEARINGS
ID
OD
THICKNESS
PART
1/2"
1-3/8"
5/16"
8222 ‡
5/8"
3/4"
1-3/8"
1-3/8"
5/16"
5/16"
8204 ‡
8201 ‡
‡with Flange
TAPERED ROLLER BEARINGS - 1.781 OD
DESCRIPTION
PART
Sealed Roller (cone) - 5/8" ID
Roller (cone) - 5/8" ID
Sealed Roller (cone) - 3/4" ID
Roller (cone) - 3/4" ID
Race (cup)
Dust Shield - 5/8" ID
Dust Shield - 3/4" ID
Reducer Bushing - 3/4" to 5/8"
8228
8258
8229
8256
8257
8305
8301
8271
JAM NUTS
ROD END BEARINGS - MALE & FEMALE
Female Type
Male Type
Economy Female Type
FEMALE - DELUXE
PART
5/16-24 Right
5/16-24 Left
3/8-24 Right
3/8-24 Left
7/16-20 Right
8221
8221-L
8244
8244-L
8245
MALE - DELUXE
PART
1/4-28 Right
1/4-28 Left
5/16-24 Right
5/16-24 Left
8mm Right
8mm Left
3/8-24 Right
3/8-24 Left
1/2-20 Right
8250-R
8250-L
8248
8249
8251-R
8251-L
8246
8247
8272
FEMALE - ECONOMY
PART
5/16-24 Right
5/16-24 Left
3/8-24 Right
3/8-24 Left
8220
8220-L
8243
8243-L
Page 14
308

Zinc Plated
DESCRIPTION
PART
1/4-28 Right
1/4-28 Left
8mm Right
8mm Left
5/16-24 Right
5/16-24 Left
3/8-24 Right
3/8-24 Left
1/2-20 Right
7/16-20 Right
5/8-18 Right
3/4-16 Right
8531
8537
8540
8541
8523
8529
8512
8530
8542
8513
8524
8525
DS
O
R
E
I
T
Kits
d
o
R
& Tie
TUBULAR TIE RODS & KITS
 5/16-24 Left & Right Threads
 Eight Standard Lengths*
 Strong, Lightweight
 Chrome Plated
Size
LengTH*
Kits
Tubes Only
5/16-24
5/16-24
5/16-24
5/16-24
5/16-24
5/16-24
5/16-24
5/16-24
9"
9-1/2"
9-7/8"
10"
10-1/2"
10-3/4"
11"
11-7/16"
1849-090
1849-095
1849-099
1849-100
1849-105
1849-107
1849-110
1849-115
8227-090
8227-095
8227-099
8227-100
8227-105
8227-107
8227-110
8227-115
Each Kit Includes:
(1) Tubular Tie Rod
(2) Deluxe Rod Ends - Right & Left
(2) Jam Nuts - Right & Left



SOLID TIE RODS & KITS
Adjustable & Trimmable
2" Long Right-Hand Threads
Plated Steel
Each Deluxe Kit Includes:
(1) Solid Tie Rod
(2) Deluxe Rod End Bearings
(2) Jam Nuts
Each Economy Kit Includes:
(1) Solid Tie Rod
(2) Economy Rod End Bearings
(2) Jam Nuts
Size
5/16-24
5/16-24
5/16-24
3/8-24
3/8-24
Length*
Deluxe Kit
Economy Kit
Tie Rod Only
11"
15"
24"
11"
13"
1842-11
1842-15
1842-24
1844-11
1844-13
1843-11
1843-15
1843-24
1841-11
1841-13
8275-11
8275-15
8275-24
8276-11
8276-13
*Other lengths available in quantity. Please ask us about minimum order requirements.
Page15
308
LE
HIC
E
L Vccessories
L
A
M
S s&A
Brake
AZUSA 4" & 4-1/2" BAND BRAKES
Band Brakes are simple, effective and economical for a variety
of light duty vehicles. Two popular sizes for either 4" or 4-1/2"
drums. Brake Pin included.
Brake Pin




Anchor Pin
(not included)
Brake Cable
Brake Drum
Steel Bands
2 Piece Bonded Brake Lining
Steel Brake Pin with Cable Hole
Economical
Axle
Description – 4-1/2"
Part
Description – 4"
Part
Band Brake for 4-1/2" Drum + Pin - Skin-Packed
Band Brake for 4-1/2" Drum + Pin - Bulk
Brake Pin (Replacement)
2255
2255-B
2254
Band Brake for 4" Drum + Pin - Skin-Packed
Band Brake for 4" Drum + Pin - Bulk
Brake Pin (Replacement)
2251
2251-B
2254
4-1/2" BRAKE DRUMS - MACHINED
4" BRAKE DRUM
Flanged drum has 6 holes on a 5-1/4" bolt circle. All
machined either “OD” for band brakes or “ID” for brakes
on page 17. All drums have 3 sets of mounting holes:
3 & 4 hole on a 3.75" diameter bolt circle and a
4 hole on a 3.228" bolt circle to match the mini
hub on page 24.





Machined OD for
Band Brake Use
Description
Drum, 4-1/2", Machined OD, No Flange
Drum, 4-1/2", Machined OD, With Flange
Part
2211-OD
2213-OD
Page 16
308
For Use with 4" Band Brake
2.875" Bolt Circle
4 Holes - 5/16" & 3/8"
2" Center Bore
Description
Part
Brake Drum, 4", No Flange
2541
AZUSA 4-1/2" BRAKES FOR MINI VEHICLES
*Actuator arm available with right offset, left offset
or straight. Unless otherwise specified right-hand
offset actuator arm will be supplied as illustrated.




Two Backing Plate Styles
Three Actuator Arm Choices*
Bonded Brake Shoes
KES
A
R
B
"
s
4 - 1 /A2c c e s s o r i e
and
5/8" , 3/4" or 1" Axle Bore
RENEWAL PARTS
Round backing plate brake assy
DESCRIPTION
PART
DESCRIPTION
PART
Steel backing plate, 5/8" bore
Aluminum backing plate, 5/8" bore
Steel backing plate, 3/4" bore
Aluminum backing plate, 3/4" bore
Steel backing plate, 1" bore
Aluminum backing plate, 1" bore
2270S
2270A
2272S
2272A
2271S
2271A
Lined Brake Shoes, Pair
Actuator Arm
Spring (2 required)
Cam
Lockwasher-Split
Flat Washer
Locknut for Cam, 5/16-18
2260
2263
2264
8235
8302
8304
8510
4-1/2" BRAKE DRUMS - MACHINED
ANCHOR BACKING PLATE ASSEMBLY
DESCRIPTION
PART
Steel anchor backing plate, 5/8" bore
Steel anchor backing plate, 1" bore
2208
2269
SINGLE-PIECE SPROCKET DRUMS
Stamped for added precision, our one-piece #35 chain 60 or 72 tooth
Steel Sprocket and 4-1/2" Drum combinations provide strong, reliable
units at economical prices. (Replaces Riveted assemblies.)
 2-1/8" Center Bore
Flanged drum has 6 holes on a 5-1/4" bolt circle. All are machined
either “ID” for brakes on this page, or “OD” for band brakes on
page 16. All drums have three sets of mounting holes: 3 and 4
hole on a 3.75" diameter bolt circle and a 4 hole on a 3.228" bolt
circle to match the mini hub on page 24.
Description
Part
Description
Part
Drum, no Flange
Drum with Flange
2211-*
2213-*
Drum & 60 Tooth Sprocket, Pltd.
Drum & 72 Tooth Sprocket, Pltd.
2217-*
2218-*
* Specify machined surface either “-ID” or “-OD”
* Specify machined surface either “-ID” or “-OD”
4-1/2" DRUMS WITH
RIVETED HUBS
Azusa Mini-Hubs (1" or 1-1/4" bore), riveted to any of our 4-1/2"
drums for use on a 1" or 1-1/4" Live Axle. Ideal for small,
low horsepower vehicles. (Set Screws and Key included.)
Description
Part
72T Sprocket, Drum & 1" Hub Kit, #35 Chain
72T Sprocket, Drum & 1-1/4" Hub Kit, #35 Chain
60T Sprocket, Drum & 1" Hub Kit, #35 Chain
60T Sprocket, Drum & 1-1/4" Hub Kit, #35 Chain
Flanged Drum & 1" Hub Kit
Flanged Drum & 1-1/4" Hub Kit
Drum, No Flange & 1" Hub Kit
Drum, No Flange & 1-1/4" Hub Kit
2268-*
2248-*
2267-*
2247-*
2266-*
2246-*
2265-*
2245-*
* Specify machined surface either “-ID” or “-OD”
Page 17
308
KES
A
R
B
6"
es
5 " d& A c c e s s o r i
an
5" INTERNAL DRUM BRAKE
 Black Anodized Aluminum Backing Plate
 Sturdy Arm Allows For 8 Positions
 Only 16 Ounces Total Weight
 Bonded Brake Shoes
5" BRAKE DRUM
With a 5/8" bore and only 1-3/8" wide, this sturdy,
lightweight, economical 5" internal expanding brake
may be just the unit for your small vehicle.
Azusa 5" Brake Assembly
5" Brake Drum w/o Flange (3-1/4" Bolt Circle)
2530
2542
6" INTERNAL DRUM BRAKE




5" Brake Components
PART
Backing Plate, Pivot & Bushing
Actuating Cam
Brake Arm
Lined Shoes, Pair
Spring
Cotter Pin
Lockwasher 5/16
Locknut 5/16-18, Thin Nylon
2532
2533
2537
2538
2539
8418
8302
8510
Adjustable Actuator Arm
Premium Bonded Linings
Machined Braking Surface
Chrome Plated Drum
1860
COMPLETE hub & brake KITS
6" Brake, Plated Drum, Mounted w/
Uni-Hub & Set Screw (1/4" Keyway)
As above plus Spacer & Hardware
kit COMPONENTS
6" Brake Assembly, Less Drum
Uni-Hub & Set Screw (1/4" Keyway)
Drums - 4-9/16" Bore:
• Unplated
• Plated
• Unplated with Riveted Uni-Hub
• Plated with Riveted Uni-Hub
1" ID Hub
1.25" ID Hub
2551
2547
2552
2548
1" ID Hub
1.25" ID Hub
2550
2556
2550
2559
8138
8139
8149
8142
8138
8139
8146
8141
2550
2556/
2559
8139
REPLACEMENT PARTS
BONDED SHOES FOR
6" AZUSA BRAKE
DESCRIPTION
PART
Pair, Bulk
Pair, Skin-Packed
8100
8101
Part
Brake Shoes with Lining, Bulk, Pair
Brake Shoes with Lining, Packaged, Pair
Spring - Short (2 required)
Spring - Long (2 required)
Arm Assembly Kit with Fasteners
Cam Assembly
8100
8101
8455
8456
8147
8148
SPACER – BRAKE TO HANGER
Aluminum die-cast spacer secures the
6" brake accurately to the frame hanger.
It is designed to adapt to either the two
or three hole flangettes. (Use #8465
Bolts and #8510 Locknuts)
(order Bolts
& Locknuts
separately)
Page 18
308
DESCRIPTION
PART
Spacer - Brake to Hanger (w/o hardware)
1860
AZUSA “POSI STOP” MECHANICAL DISC BRAKE
&
A K E So r i e s
R
B
c
dis e Access
Brak
 1" Axle Bore With 1/4" Keyway
 Dual Pads of Bonded Lining
 Self Aligning to Disc
 5/16" Arm Hole
1@
2
5C
4V
8
Description
Part
Brake Assembly without Disc
Disc Only, 8" Diameter, 1" Bore, 1/8" Thick
Replacement Shoes with Lining (2 required)
1822
1823
8118
1823
1822
BRASS FITTINGS FOR HYDRAULIC BRAKES
8312
8309
8311
8308
8313
8310
Description
Part
Description
Part
Compression Ferrule, 3/16"
Compression Nut, 3/16"
Connector, 3/16" tube to 1/8" tube N.P.T.
8308
8309
8310
Full Union, 3/16" tube to 3/16" tube N.P.T.
Male Run Tee, 3/16" tube to 1/8" N.P.T.
Male Adapter Elbow, 3/16" tube to 1/8" N.P.T.
8311
8312
8313
HYDRAULIC BRAKE LINE
BRASS HYDRAULIC FITTINGS KIT
(Nylaflow® Type H)
Highest strength general purpose hydraulic tubing, Type
6/6 Nylon. 3/16" OD x 0.038" wall, with 5/8" minimum
bend radius.
Assortment consisting of the most needed replacement fittings: (4) 3/16 compression ferrules, (2) 3/16 compression
nuts, a 90° adaptor elbow
and a straight connector.
See above for individual
part numbers.
Operating temperature from -65 ˚F to 150 ˚F. Minimum
burst pressure, 2,500 psi. Minimum order, 10 ft.
Brass Fittings Kit
2253
Pressure Tubing, 3/16 Nylon, per ft.
8307
Page 19
308
r
Tubula LES
AX
T
R
A
K
ALUMINUM TUBE AXLES
1-1/4" O.D. • .195" WALL • ANODIZED ALUMINUM
length
silver
gold
24"
30"
32"
34"
38"
40"
44"
1432-24
1432-30
1432-32
1432-34
1432-38
1432-40
1432-44
—
1433-30
1433-32
—
—
1433-40
1433-44
AZUSA TUBULAR AXLES
Azusa offers tubular axles in three quality materials. True
Chrome-Moly Steel, Standard Steel and Aluminum Alloy. All
are centerless ground for a true surface. Two keyways each
running half the length of the axle, are offset 180° and stop
1/4" before the snap ring grooves at each end. Plated and
poly-wrapped for protection. Snap Rings included.
(For Snap Ring part numbers, see page 49.)




3 Materials:
...Zinc Plated Chrome-Moly Steel
...Zinc Plated Standard Steel
...Anodized Aluminum
Strong & Lightweight
STANDARD STEEL TUBE AXLES
1-1/4" O.D. • .190" WALL
Axle length
Centerless Ground
PART no.
42"
44"
Opposing, Offset Keyways
1420-42
1420-44
CHROME-MOLY TUBE AXLES
4130 STEEL
diameter
KW
length
.190 wall*
.250 wall*
diameter
KW
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
23"
26"
28"
32"
34"
36"
37"
38"
39"
40"
42"
44"
46"
48"
1421-23
1421-26
—
1421-32
1421-34
1421-36
1421-37
1421-38
1421-39
1421-40
1421-42
1421-44
1421-46
1421-48
—
1424-26
1424-28
1424-32
1424-34
1424-36
—
1424-38
—
1424-40
1424-42
1424-44
1424-46
1424-48
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1/4"
1/4"
1/4"
1/4"
1/4"
34"
36"
40"
42"
44"
—
—
—
—
—
1422-34
1422-36
1422-40
1422-42
1422-44
1-1/2"
1-1/2"
1-1/2"
1/4"
1/4"
1/4"
40"
42"
44"
1440-40
1440-42
1440-44
—
—
—
35mm
35mm
5/16"
5/16"
40"
44"
—
—
1423-40
1423-44
*Nominal after centerless grinding
length .156 wall* .225 wall*
*Nominal after centerless grinding
Page 20
308
Steel
d
i
l
o
S
XLES
A
T
R
KA
STANDARD STEEL AXLES
For economy and serviceability, Azusa Standard Axles are the ones to
use. They have two 1/4" keyways, 180° offset, 3/4-16 threads,
three types of ends and eight different lengths. Plated
and poly-wrapped for protection.
axle
dia.
overall shoulder to
length
shoulder
part
3/4"
41"
41"
1405-41
1"
1"
1"
1"
1"
1"
1"
34"
36"
38"
40"
42"
44"
54"
30"
32"
34"
36"
38"
40"
50"
1401-34
1401-36
1401-38
1401-40
1401-42
1401-44
1401-54
Short Stepped End (1-1/2")
(thread length 1-1/8")
1"
1"
1"
1"
36"
38"
40"
42"
33"
35"
37"
39"
1402-36
1402-38
1402-40
1402-42
Snap Ring End (no step)
1"
1"
1"
1"
22"
30"
38"
40"
22"
30"
38"
40"
1403-22
1403-30
1403-38
1403-40
Threaded No-Step End
(thread length 2")
Stepped End (2")
(thread length 1-3/8")
(Snap Rings Included; for Snap
Ring part nos., see page 49)



Brightly Plated


3/4", 1" or 25mm Diameter
Offset Keyways
Stepped-Down Threaded Ends or
Snap Ring Grooves
Flexpruf Steel or Standard Steel
1/4" (keyway)
DELUXE FLEXPRUF STEEL AXLES
3/4"
3/4"
1-3/8"
2"
1"
Standard End
axle
O.D.
overall shoulder to
length
shoulder
1"
1"
1"
1"
1"
36"
38"
40"
42"
44"
32"
34"
36"
38"
40"
1411-36
1411-38
1411-40
1411-42
1411-44
Short End (1-1/2")
(thread length 1-1/8")
1"
1"
1¾
36"
38"
40"
33"
35"
37"
1412-36
1412-38
1412-40
25mm
1"
40"
40"
40"
40"
1414-40
1413-40
Snap Ring End (no step)
Short End
part
Standard End (2")
(thread length 1-3/8")
(Snap Rings Included; for Snap
Ring part nos., see page 49)
1-1/8"
1-7/16"
Our premium Deluxe Flexpruf axles are made of higher
strength steel. The ends step down from 1" to 3/4" and have a
3/4-16 thread. Two keyways (1/4") are offset 180° for stress
relief, balance and unrestricted positioning of brakes, bearings and hubs. Ends are drilled for your cotter pins or safety
wire. Plated and poly-wrapped for protection.
Page 21
308
rings
a
e
B
xle
Live Aa n d K i t s
FREE SPINNING AXLE BEARINGS
(AZUSA & NTN)


STANDARD AXLE BEARINGS
Integral Locking Collar
Labyrinth Seal
 Hardened Chrome Steel
 Integral Locking Collar
 ANSI Standards
DESCRIPTION
PART
for 1" Axles
for 1-1/4" Axles
for 3/4" Axles
8211
8208
8265
DESCRIPTION
PART
for 1-1/4" Axles
for 1-1/4" Axles (NTN)
for 1-3/8" Axles
for 1-1/2" Axles
for 30mm Axles
for 35mm Axles
for 40mm Axles
for 50mm Axles
8209
8214
8260
8263
8264
8261
8262
8266
Free spinning bearings must be lubricated frequently
with a light, low viscosity oil.
LIVE AXLE BEARING KITS AND COMPONENTS
These kits include everything needed to assemble
a live axle to your frame. The bearing hangers are
designed to accept either the two or three hole
bearing flangettes. Will work with all Azusa axles.
For very long axles, an additional bearing and
hanger may be needed.
BEARING KITS
description
for 1" axles
for 1 1/4" axles
Standard
Free Spinning Standard
Kit with 2 Hole Flangettes
Kit with 3 Hole Flangettes
1861A
1861B
—
1864
—
1863
—
8209
—
8130
—
8217
8421
8510
—
—
components - each
1" Axle Bearing (2)
1 1/4" Free Spinning Bearing (2)
1 1/4" Standard Bearing (2)
Bearing Hanger (2)
Flangette - 2 Hole (4) or…
Flangette - 3 Hole (4)
Bolts - 5/16-18 x 3/4 (6) or (4)
Locknuts - 5/16-18 (6) or (4)
Axle Locknuts - 3/4 - 16 (2)
ASSEMBLED VIEW


8211
—
—
8127
8212
8213
8421
8510
8516
8208
8130
—
8217
8421
8510
—
BEARING FLANGETTES
BEARING HANGERS
Pre-Drilled for 2-Hole or 3-Hole Flangette
Quarter Inch Steel Plate
For dimensions,
see page 35
description
part
description (Each)
BOLT CIRCLE
part
For 1" Axles
For 1-1/4" Axles
8127
8130
2 Hole for 3/4" Axles
2 Hole for 1" Axles
3 Hole for 1" Axles
3 Hole for 1-1/4" Axles
2-13/16"
3"
3"
3-9/16"
8282
8212
8213
8217
Page 22
308
ain &
h
C
r
R o l lcec e s s o r i e s
A
KART CHAIN


ANSI & ISO Standards
Top Quality


Boxed or Reels
Race-Proven
#2
19
AI
CH
RD
DA 5
AN #3
ST
N
IN
N
AI
IN
CH
HA
5C
#2
HA
EC
AC #35
SP
description
part
description
part
description
10 Ft. Box w/ Connecting Link
Reels
36" Box w/ Connecting Link
40" Box w/ Connecting Link
48" Box w/ Connecting Link
Connecting Link
4006-10
4006
4390
4392
4391
4007
10 Ft. Box w/ Connecting Link
Reels
36" Box w/ Connecting Link
48" Box w/ Connecting Link
60" Box w/ Connecting Link
Connecting Link
Offset Link
4008-10
4008
4316
4318
4313
4009
4010
#219H x 120 Pitches - Boxed
4397
#219H x 10 ft. - Boxed
4398-10
#25 x 10 ft. - Boxed w/conn. link
4001-10
#25 Reels
4001
#25H x 10 ft. - Boxed w/conn. link
4801-10
#25H Reels
4801
(Call for connecting & offset link part nos.)
part
ADDITIONAL ROLLER CHAIN
Other popular sizes of roller chain are listed in the table below. They
find use in Quarter Midgets, Concession Karts, Jr. Dragsters, and
other chain-driven applications.
description
10 ft. Box with
Conn. Link
Reels - per foot
Connector Links
Offset Link
#40
4014-10
4014
4015
4016
#41
4023-10
4023
4024
4025
#420
4035-10
4035
4036
4037
#428
4038-10
4038
4039
4040
#520
#530
4044-10
4044
4045
4046
4056-10
4056
4057
4058
Azusa inventories a complete line of industrial and motorcycle
chain. Please check with us regarding sizes and types not shown.
CHAIN BREAKERS

part
Chain Breaker (#25 thru #60) 4097
(includes Spare Pin)
40
41
420
428
520
530
1/2
1/2
1/2
1/2
5/8
5/8
roller
diameter
roller
width
.306
.306
.306
.335
.400
.400
5/16
1/4
1/4
5/16
1/4
3/8
pin
average
diameter tensile
.156
.141
.156
.177
.200
.200
3,700
2,000
3,700
4,200
6,100
6,100
CHAIN DEFLECTORS
For 3/8", 1/2"
& 5/8" Pitch Chain
description
GENERAL CHAIN DIMENSIONS & STRENGTH
chain
pitch
number
description
part
Deluxe Chain Breaker
Replacement Pins (5 Pack)
4899
4099
NOTE:
Chain
deflectors are
designed to help prevent broken chain from
flying, diverting it toward
the ground. (NOT designed
to prevent clothing, body parts, hair, etc. from
becoming entangled in the chain.)
Briggs/Tecumseh Chain Deflector
1809
Chain Deflector, Chromed
1810
Page 23
308
ND
A
s
b
hu rockets
Sp
PLATED STEEL UNI-HUB




Zinc-Pated Steel
1" or 1-1/4" Bore with 1/4" Keyway
Strong, yet Lightweight
Standard 5.25" Bolt Circle
DESCRIPTION
1" Uni-Hub w/Hardware Kit, Skin-Pack
Uni-Hub w/Hardware Kit, Bulk
Uni-Hub w/Set Screws only




STEEL MINI-HUB
1" or 1-1/4" Bore with 1/4" Keyway
Fits Azusa 4-1/2" Brake Drum
2555
2555-A
2556
1-1/4"
DESCRIPTION
PART
2558
2558-A
2559
Hardware Kit for Uni-Hub
Hardware Kit Includes:
6 Bolts, 1/4-28 x 1/2"
6 Hex Nuts, 1/4-28
1 Key, 1/4 x 1/4 x 1-1/4"
2 Set Screws
2557
8463
8500
8435
8483
.160 ALUMINUM MINI-SPROCKETS
Smaller diameter, aircraft grade aluminum #35 Tuf-N-Tru
sprockets, 37 to 52 teeth, split. Can also be made for other
chain sizes. Specify bolt pattern P5223 and chain size.
2 Four-Hole Bolt Circle Patterns:
3.228" & 2.8 75"
Zinc Plated
description
1"
Mini-Hub w/Hardware Kit, Skin-Pack
Mini-Hub w/Hardware Kit, Bulk
Mini-Hub w/Set Screws Only (Bulk)
Hardware Kit* for 3.228" Bolt Circle
Hardware Kit for 2.875" Bolt Circle
2562
2562-A
2561
2564
2563
1-1/4"
2566
2566-A
2565
2564
2563
*Same as Uni-Hub Kit (above) except 4 Bolts, 4 Nuts





Teeth
part
Teeth
part
37
38
39
40
41
42
43
44
2084
2085
2086
2087
2088
2089
2090
2091
45
46
47
48
49
50
51
52
2092
2093
2094
2095
2096
2097
2098
2099
MARK IV VARI-HUB
Zinc Double Tapered Bushing - 1" OD
10 nuts, 10 Bolts & 1 Key Included
For All 4-9/16" ID Sprockets
REPLACEMENT PARTS
DESCRIPTION
Outer Hub - Aluminum
Bushing, 1" w/1/4" Keyway
Hardware Kit for Vari-Hub
Hardware Kit Includes:
6 Bolts, 1/4-28 x 3/4"
4 Bolts, 1/4-28 x 1-1/2"
10 Hex Nuts, 1/4-28
1 Key, 1/4 x 1/4 x 1-1/4"
5.25" Bolt Circle, 5.87" OD
Strong and Lightweight
DESCRIPTION
PART
Vari-Hub w/Hardware Kit, Skin-Pk
OEMS: Buy Bulk and Save
1872
1872-A
Page 24
308
PART
8061
8062
1875
8416
8415
8500
8435





Two Thicknesses: .125" & .160"
R
Fits Hubs with 5.25" Bolt Circle
S p l i t o c ke t s
Spr
acing
Premium Heat-Treated Aluminum
Root Split for Perfect Alignment
TRU-N-FINE (TNF)
.160" Thick #219 Chain
Clear Anodized
Hobbed Teeth - Not Stamped
(TNF sprockets may be
ordered split as shown
or one-piece.)
TUF-N-TRU (TNT)
.160" Thick #35 Chain
Clear Anodized
TRU-A-LINE (TAL)
.125" Thick #35 Chain
Blue Anodized
TNF
4-9/16" BORE ALUMINUM SPROCKETS - PART NUMBER TABLE
TNF
TNT
TAL
TNT
TAL
TNF
TNT
TAL
CHAIN SIZE
#219
#35
#35
CHAIN SIZE
#219
#35
#35
CHAIN SIZE
#219
#35
#35
THICKNESS
.160
.160
.125
THICKNESS
.160
.160
.125
THICKNESS
.160
.160
.125
Teeth
Part
Part
Part
Teeth
Part
Part
Part
Teeth
Part
Part
Part
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2602
2603
2604
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2001
2047
2002
2048
2003
2049
2004
2050
2005
2051
2006
2052
2007
2053
2008
2054
2009
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
*2699-85
*2699-86
2055
2010
2056
2011
2057
2012
2058
2013
2059
2014
2060
—
2061
—
2062
—
—
87
88
89
90
91
92
93
94
95
96
97
98
99
100
102
104
114
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
—
2635
—
—
—
*2699-87
*2699-88
*2699-89
*2699-90
*2699-91
*2699-92
*2699-93
*2699-94
*2699-95
*2699-96
*2699-97
*2699-98
*2699-99
*2699-100
*2699-102
*2699-104
*2699-114
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
*For all 2699 numbers, also known as Jumbo
XNT sprockets, “SPLIT” must be specified or
sprockets will be shipped whole.
SPLIT SPROCKET CLIPS
For Sprocket Halves with 1/4" holes
#35 Chain sprockets
#41 thru #520 Chain sprockets
8352
8351
minimum order 10 pieces
Page 25
308
ke t
c
o
r
p
ty S s
l
a
i
c
e
Sp
& Hub
s
HEAVY DUTY SPROCKET HOLDER
Heavy Duty Sprocket Holder/Hub
1-5/8"




5"
4" Bolt Circle
Steel Hub for 1" Live Axles
2286
5/16" Hole,
4 places
1/4"
Keyway
2" R
1"
Set Screw
1/8"
Zinc Plated
Locknuts, Grade 5 Bolts & Set Screw Included
SPROCKETS FOR HEAVY DUTY SPROCKET HOLDER
 Premium High-Strength Aluminum
 4" Bolt Circle - 5/16" Holes (4)
 Pattern P2286, 1.5" Bore
 #35 to #530 Chain Size
CHAIN
SIZE
MINIMUM
TEETH
PATTERN
PART
50
35
35
35
29
29
P2286
P2286
P2286
P2286
P2286
P2286
T5313-*
T5314-*
T5315-*
T5320-*
T5316-*
T5317-*
#35
#41
#40
#428
#520
#530
*When ordering, add no. of teeth to part no. & ALWAYS SPECIFY PATTERN
TWO-PIECE “B” TYPE ENGINE HUB AND SPROCKET ASSEMBLIES
STEEL HUBS
 For 1" ID Sprockets, Any Chain Size
SPLIT
 P5256 Sprocket Pattern
ALUMINUM HUBS
 Precision Billet Machined
 For 1" ID Sprockets, Any Chain Size
 P5248 Sprocket Pattern
Plated steel hubs are 1/2" thick, have a 2-1/4" OD and a 1" OD
shoulder. Two bore sizes are available: 5/8" or 3/4", with a 3/16"
keyway and opposed set screw hole. Both have a 3 hole bolt pattern drilled on a 1-11/16" circle to fit a P5256 sprocket pattern.
Mounting Hub - 5/8" Bore
Mounting Hub - 3/4" Bore
ALUMINUM
SPROCKETS
Split Billet Aluminum Clamp-On Engine Hub A 1" raised shoulder
surrounds the bore for added stability. 3/4" bore, 3/16" keyway
with 3 threaded bolt holes on a 1.680" bolt circle to fit a P5248
sprocket pattern. Bolts included.
2037
2038
Split Aluminum Clamp-On Engine Hub
CHAIN
SIZE
#35
#35
#40
#520
#35
#40
#520
BORE
BOLTS
BOLT
CIRCLE
1"
1"
1"
1"
1"
1"
1"
3 @ .272
3 @ .272
3 @ .272
3 @ .272
3 @ .272
3 @ .272
3 @ .272
1.687
1.687
1.687
1.687
1.680
1.680
1.680
MIN.
TEETH PATTERN
21
37
17
18
21
17
18
P5256
P5256
P5256
P5256
P5248
P5248
P5248
PART
(2021-2036)**
T5313-*
T5315-*
T5316-*
T5313-*
T5315-*
T5316-*
*When ordering, add no. of teeth to part no. & ALWAYS SPECIFY PATTERN
**2021 thru 2036 part numbers for #35 chain, 21 to 36 tooth
Page 26
308
2039
lty
Specia ET S
S P R O CK
RACING SPROCKETS - FOR LARGER CHAIN SIZES
chain
size
bore
bolts/
size
bolt
circle
min
tooth
pattern
part
#40
#41
#520
#530
4.563
4.563
4.563
4.563
6 @ .261
6 @ .261
6 @ .261
6 @ .261
5.250
5.250
5.250
5.250
40
40
33
33
P5245
P5245
P5245
P5245
T5315 - *
T5314 - *
T5316 - *
T5317 - *
*When ordering, add no. of teeth to part no. &
ALWAYS SPECIFY PATTERN
 5.25" Bolt Circle – 4.563" ID
 Split or Unsplit (Specify)
 For Racing or Concession Karts
 Premium High-Strength Aluminum
SPROCKET GUARDS
 Premium High-Strength Aluminum
 5.25" Bolt Circle
 Two Thicknesses
 Split or Unsplit (Specify)
THICKNESS
.125"
.160"
6-7/8"
7-3/8"
2000-AG
2600-AG
2000-BG
2600-BG
OUTSIDE DIAMETER
7-7/8"
8-3/8"
8-7/8"
2000-CG
2600-CG
2000-DG
2600-DG
2000-EG
2600-EG
9-1/2"
10-1/4"
2000-FG
2600-FG
2000-GG
2600-GG
ECONOMY STEEL SPROCKETS
 Steel, Plated, One Piece  60T, 66T or 72T for #35 Chain  40T, 54T or 60T for #40/41 Chain
FOR #35 CHAIN
FOR #40/41 (#420) CHAIN
FOR #35 CHAIN
TH
BLT CR
HOLES
BORE
PAT
PART
60
60
60
72
72
72
—
3.25
5.25
—
3.25
5.25
—
[email protected]
[email protected][email protected]
[email protected]
1.375
1.375
4.930
1.375
1.375
4.930
—
P2161
P5245
—
P2161
P5245
2151
2155
2152
2157
2161
2158
TH BLT CR HOLES
60
72
60
66
72
4.00
4.00
2.875
2.875
2.875
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
BORE
1.50
1.50
2.00
2.00
2.00
PAT
P2286
P2286
P5263
P5263
P5263
PART
2165-60
2165-72
2164-60
2164-66
2168-72
TH BLT CR HOLES
BORE
PAT
PART
40
54
60
54
54
4.563
4.563
4.563
2.00
1.50
P5245
P5245
P5245
P5263
P2286
2166-40
2166-54
2166-60
2167-54
2168-54
5.25
5.25
5.25
2.875
4.00
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Page 27
308
lty
Specia ET S
S P R O CK
SHIFTER KART & QUARTER MIDGET SPROCKETS





POPULAR PATTERNS & SIZES:
Split or Unsplit (Specify)
Premium High-Strength Aluminum
Fit Quarter Midget Hubs
Shifter Kart Race Ready
Other Sizes & Patterns Available
chain
size
bore
boltS/
size
bolt
circle
minimum
teeth
pattern
part
#35
#35
#35
#35
#35
#41
#41
#40
#40
#40
#40
#40
#40
#40
#40
#40
#40
#428
#428
#428
#520
#520
1.000
1.000
1.750
2.000
2.125
2.000
3.250
1.000
1.000
1.625
1.625
1.625
1.750
1.750
2.000
3.250
2.125
1.625
1.625
1.625
2.000
2.373
3 @ .272
3 @ .272
4 @ .453
4 @ .375
4 @ .343
4 @ .375
8 @ .312
3 @ .272
3 @ .272
4 @ .312
4 @ .375
4 @ .390
4 @ .453
4 @ .453
4 @ .375
8 @ .312
4 @ .343
4 @ .312
4 @ .375
4 @ .390
4 @ .312
6 @ .343
1.680
1.687
2.75
2.875
2.656
2.875
4.00
1.680
1.687
2.312
2.312
2.312
2.375
2.75
2.875
4.00
2.656
2.312
2.312
2.312
3.00
3.146
21
21
30
34
29
25
33
17
17
23
23
23
20
23
25
33
22
23
23
23
20
22
P5248
P5256
P5237
P5263
P5231
P5263
P5270
P5248
P5256
P5251
P5250
P5252
P5233
P5237
P5263
P5270
P5231
P5251
P5250
P5252
P5260
P5265
T5313-*
T5313-*
T5313-*
T5313-*
T5313-*
T5314-*
T5314-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5315-*
T5320-*
T5320-*
T5320-*
T5316-*
T5316-*
*When ordering, add number of Teeth to Part No. & ALWAYS SPECIFY PATTERN
If we don’t have your desired pattern on file, send us a sample hub or old sprocket.
ENGINE & AXLE RACING SPROCKETS


#40 Chain Sprockets
Premium High Strength Aluminum
ENGINE SPROCKETS
TEETH
PART
23
24
25
26
27
28
29
30
31
32
33
34
35
36
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
 Fits Engine Hub, Part #2039
 P5248 Bolt Pattern,
1.680" Bolt Circle, 1" Bore


Precision Billet Machined
Clear Anodized
AXLE SPROCKETS
TEETH
PART
23
24
25
26
27
28
29
30
31
32
33
34
35
36
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
Page 28
308
 Two Identical Halves
 P5237 Bolt Pattern,
2.75" Bolt Circle,1.75" Bore


Premium High-Strength Aluminum
Precision Hobbed Teeth
CHAIN SIZE/
ROLLER DIAMETER
Material
Thickness


Alloy
m
u
n
i
A l u m CK E T S
SPRO
All Popular Chain Sizes
Hundreds of Patterns
Azusa offers the opportunity to order almost any Sprocket, precision machined with
hobbed (not stamped) teeth. Order sprockets drilled with any pattern from our vast
pattern library ranging in the hundreds, for any chain size listed and with most any
number of teeth within the range listed.
All Sprockets are fabricated from premium heat-treated aluminum alloy.
1"
BORE
TO ORDER: In the table below, find your CHAIN SIZE. Choose the number of teeth
you want and add it to the PART NUMBER in the table below. Finally, if you are ordering a FINISHED Sprocket, always specify the bolt pattern you desire when ordering.
“BLANKS” come with the specified
number of teeth and a 1" bore,
for those who want to add
their own bore and
bolt circle pattern.
chain
size
#35
#40 (#425)
#41 (#420)
#42 (#415)
#428
#520
#50 (#530)
#630
“FINISHED” sprockets come complete with bore and bolt circle
precision machined pursuant
to the pattern you specify, ready to mount.
number
of teeth†
ROLLER
DIAMETER
material
thickness
blank
part
finished
part
19-94
17-80
22-80
28-48
21-48
18-62
29-60
28-48
.306
.312
.306
.306
.335
.400
.400
.468
.125 to .160
.249 to .284
.200 to .227
.141 to .168
.249 to .284
.200 to .227
.307 to .343
.307 to .343
T5201-*
T5206-*
T5203-*
T5204-*
T5207-*
T5208-*
T5210-*
T5211-*
T5313-*
T5315-*
T5314-*
T5321-*
T5320-*
T5316-*
T5317-*
T5318-*
*When ordering, add number of Teeth to Part No. & SPECIFY PATTERN for Finished Sprockets.
†NOTE: Not all tooth sizes within listed ranges are stocked; some tooth sizes available only in OEM quantities.
HEAVY DUTY IDLER/TENSIONER SPROCKETS
 Precision or Standard Ball Bearings
 For #35, #40 or #41 Chain
 1/2" or 5/8" ID Bore
teeth
bearing size & type
for #35 Chain
teeth
bearing size & type
for#40/41 CHAIN
19
19
1/2" Precision
5/8" Precision
2196
2197
16
16
5/8" Precision
1/2" Precision
2186
2187
Page 29
308
Engine T S
E
CK
O
R
P
S
Azusa manufactures a variety of engine sprockets. The most popular are shown and you can
order off the shelf. We have the capabilities to provide your special needs in OEM quantities.
“B” Type Sprockets have a hub on one side. “C” Type Sprockets have a hub on both sides.
Keyways are 3/16" except as noted. “B” sprockets have (2) 5/16-18 set screws.
 3/16" Keyway; 5/16-18 Set Screw
 Case-Hardened Steel; Hobbed Teeth
 For #35, #40, #41 & #219 Chain
“B” TYPE SPROCKETS FOR #35 CHAIN
#35 CHAIN
TEETH
8
9
10
11
12
13
13
14
15
16
17
18
20
“B” TYPE SPROCKETS FOR #40/41 CHAIN
5/8" BORE
3/4" BORE
9° TAPERED
NO SET SCREW
PART
PART
PART
—
2123-K*
2124-K*
2125-K*
2126
2127
2127-K*
2128
2129
2130
2131
2132
2133
—
—
2138-K*
2139-K*
2140
2141
—
2142
2143
2144
2145
2146
2147
2115
2116
—
—
—
—
—
—
—
—
—
—
—
#40/41 chain
5/8" bore
3/4" bore
teeth
part
part
8
9
10
11
12
13
14
17
2101-K*
2102
2103
2104
2105
2106
2107
2108
—
2163 (11/16” BORE)
2110
2111
2112
2113
2114
—
“B” TYPE SPROCKETS FOR #219 CHAIN
teeth
BORE
12
13
14
15
16
17
18
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
*All Sprockets on this page with a “K” in their Part No. have a key
broached into the hub rather than a keyway. No key is needed.
part
1952-K*
1953-K*
1954
1955
1956
1957
1958
“B” TYPE SPROCKETS FOR #40 CHAIN
5/8" BORE 3/4" BORE
teeth
PART
10° TAPERED “B” TYPE
ENGINE SPROCKETS
FOR YAMAHA
For Honda & other 22mm
Shafts with 7mm Keyway
For #40 Chain
PART
8
1901-K*
—
9
—
—
10
—
1919
11
—
1920
22mm Bore
teeth
PART
2172
2173
2174
2175
2176
2177
12
13
14
15
16
17
#35
#35
#35
#219
#219
#219
9 Tooth - 10˚ Tapered Bore w/Keyway
10 Tooth - 10˚ Tapered Bore w/Keyway
11 Tooth - 10˚ Tapered Bore w/Keyway
10 Tooth - 10˚ Tapered Bore w/Keyway
11 Tooth - 10˚ Tapered Bore w/Keyway
12 Tooth - 10˚ Tapered Bore w/Keyway
“C” TYPE SPROCKETS FOR #35 & #40/41 CHAIN
5/8" Bore
No Set Screw
teeth
CHAIN
part
8
9
10
10
10
11
#40/41
#40/41
#40/41
#40
#35
#35
2182-K*
2180
2181
1918
2189-K*
2190-K*
Page 30
308
1930
1931
1932
1940
1941
1942




ET S
S
E
L
D onents
SPIN
mp
and Co
JIG-WELDED SPINDLES – 5/8" KINGPIN
Bushings, Spacers & Locknuts Included in Kits
Two Axle Diameters – 5/8" & 3/4"
Jig-Welded for Uniformity
The individual assemblies in a spindle set
are designated as “Side 1” and “Side 2.”
This indicates that one is the “mirror
image” of the other to produce a set, no
matter how the assemblies are oriented.
Choice of Lengths
SIDE 1
SIDE 2
SPINDLE ONLY
SPINDLE & BRACKET SET
SIDE 1
SIDE 2
AXLE
LENGTH
SIDE 1
SIDE 2
2204
2235
2512
2200
2231
2516
2205
2236
2513
2201
2232
2517
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
3.75"
4.50"
6.00"
3.75"
4.50"
6.00"
2206
2237
2514
2202
2233
2518
2207
2238
2515
2203
2234
2519
Unwelded Components Available. See page 35.
(Nyliner Bushings Included)
LENGTH
AXLE
SPINDLE ONLY
SPINDLE & BRACKET SET
5/8" SPINDLE BRACKET
& HARDWARE
1/2" SPINDLE BRACKET
& HARDWARE
For Spindle Bracket
dimensions, see page 35
COMMON TO 5/8" & 3/4" SPINDLE SETS
PART
Spindle Bracket for 5/8" Kingpin
Kingpin Bolt 5/8-18 x 3.25"
Kingpin Nut 5/8-18 Nylon Insert Locknut
Nyliner Bushings (2 required)
8171
8447
8515
8215
5/8" SPINDLE AXLE
PART
Nylon Spacer 5/8" ID
Nylon Insert Locknut 5/8-18
8328
8515
3/4" SPINDLE AXLE
PART
Nylon Spacer 3/4" ID
Nylon Insert Locknut 3/4-16
8329
8516
COMPONENTS
PART
Spindle Bracket For 1/2" Kingpin
Kingpin Bolt 1/2-20 x 3.75"
Locknut - 1/2-20
8181
8446
8514
Page 31
308
inum
m
u
l
A
&
s
Steel ing Wheel
Steer
10" DIAMETER
NEOPRENE COMPETITION STEERING WHEEL
 Two Diameters - 10" & 12"
 Solvent-Proof Neoprene
 One Piece Construction - No Welds  2 Bolt Circles
 Chrome Plated Quality Steel
#1801
12" DIAMETER
#1805
SOLID NEOPRENE
OVER STEEL
DIMENSIONAL DIAGRAMS
2 Bolt Circles:
1-5/8" w/ 1/4"
diameter holes
10" or 12" OD
1-3/4" w/ 5/16"
diameter holes
1-5/8" w/ 1/4"
diameter holes
11"
1/4"
1"
1"
#1805 = 2-3/4"
#1801 = 2-1/8"



4"
ALUMINUM BUTTERFLY STEERING WHEELS
Non-Flexing, Strong 1/4” Tempered Aluminum Alloy
Choice of Black Anodized or Polished Aluminum
ANODIZED BLACK
#2293
Molded Neoprene Grips
POLISHED ALUMINUM
#2294
The Butterfly Steering Wheel design evolved from
actual track experience. The unique, non-symmetrical
design enables the steering wheel to be mounted in either
of two positions, to best suit the driver’s personal taste. The
Butterflys also feature neoprene compound grips to resist fuels and
lubricants -- just soft enough to dampen vibration without being
spongy.
Page 32
308
heel
W
g
n
i
r
Stee SORIES
A CC E S
STEERING SHAFT & HUB ASSEMBLIES 5/8"
8412
8419
8528

Fits All Azusa Steering Wheels

8527
8418
Heavy Duty Pitman Arms

8134
2 Bolt Circles: 1-5/8" & 1-1/2" Diameter

8322
Splined Shaft and Hub for Perfect Alignment
8554
O.E.M.s:
OTHER LENGTHS
AVAILABLE IN
QUANTITY
8137
8140
COMPLETE STEERING SHAFT KITS
length
arms not
welded
arms
welded
22"
24"
25"
28"
34"
1868-22
1868-24
1868-25
1868-28
1868-34
1867-22
—
1867-25
1867-28
—
8554
8129
STEERING KIT, LESS SHAFT
Hardware Kit with Pitman Arms
Hardware Kit without Pitman Arms
KIt components
1873
1874
quantity
Part
(1)
(2)
(2)
(1)
(3)
(3)
(1)
(3)
(1)
8134
8129
8554
8528
8412
8527
8418
8419
8322
Hub-splined - two bolt circles
Pitman Arms - 5/16" bolt hole
Collar w/Set Screw
Hex nut - slotted 1/2-20
Bolts w/hole 1/4-28 x 3/4"
Hex Nut - slotted 1/4-28
Cotter Pin - 3/32" x 3/4"
Cotter Pin - 1/16" x 1/2"
Snap Ring
STEERING SHAFTS,
5/8" SPLINED WITH SNAP RING
length
6"
22"
24"
25"
28"
34"
KILL BUTTON SWITCH
shaft
shaft with
welded arms
8137-6
8137-22
8137-24
8137-25
8137-28
8137-34
—
8140-22
—
8140-25
8140-28
—
STEERING WHEEL CAP ASSEMBLY
SNAP-IN CAP, CHROMED
#8136
MOUNTING CUP,
PLATED #8135
This spring loaded ground contact switch fits both
7/8" and 1" frame or handle bars. A 36" shielded wire,
with a spade type end fitting is assembled for fast
installation. Plated and a real safety feature for all
vehicles.
Chrome plated steel, this is the perfect mate
for Azusa’s Steering Wheels. Fits either 1-1/2"
or 1-5/8" bolt circle.
AVAILABLE
IN ATTRACTIVE
SKIN PACK
description
Part
description
Part
Kill Switch, Skin Packed
Kill Switch, Bulk
1721
1721-B
Steering Wheel Cap Assembly, Pkgd
Steering Wheel Cap Assembly, Bulk
1877
1877-A
Page 33
308
trol
n
o
C
t
Kar WARE
HARD
ROD END BEARINGS
Your Choice of Deluxe or Economy Type
DELUXE TYPE - MALE
Size
1/4-28
5/16-24
8mm
3/8-24
1/2-20
Right Hand Left Hand
Thread
Thread
8250-R
8248
8251-R
8246
8272
8250-L
8249
8251-L
8247
­–
DELUXE TYPE - FEMALE
Size
ECONOMY TYPE - FEMALE
Right Hand Left Hand
Thread
Thread
Right Hand Left Hand
Thread
Thread
Size
5/16-24
8221
8221-L
5/16-24
8220
8220-L
3/8-24
8244
8244-L
3/8-24
8243
8243-L
7/16-20
8245
—
JAM NUTS
DESCRIPTION
PART
1/4-28 Right
1/4-28 Left
5/16-24 Right
5/16-24 Left
8mm Right
8mm Left
3/8-24 Right
3/8-24 Left
7/16-20 Right
1/2-20 Right
8531
8537
8523
8529
8540
8541
8512
8530
8513
8542
For Tie Rods, see page 15
BRAKE CONTROL ROD KIT
COMPLETE KIT
throttle and brake control rod kit
Brake Kit
(Less Rod)
#2279
2281
KIT COMPONENTS
Part
Brake Rod, 1/4" Dia., Black Oxide Finish
40-1/2" Long,1/4-28 Rolled Thread
Clevis, Forged 1/4-28
Clevis Pin, w/Hole
Cotter Pin, 1/16" x 1/2"
Tinnerman Nut
8218
8354
8355
8419
8505
THROTTLE CONTROL ROD KIT
COMPLETE KIT
KIT COMPONENTS
CONTROL ROD ANCHORS
Stamped steel anchors in two nominal
gauges, 0.160" (8 ga) and 0.375" (3/8),
arc designed for 7/8" or 1" OD tubing,
but may be welded anywhere. Hole
accommodates 1/4" control rods.
PART
Throttle Rod, 1/4" Diameter, Black Oxide Finish
30" Long,1/4-28 Rolled Thread w/Drilled Hole
Wire Stop
Spring, 1/4" x 1-7/8"
Throttle Cable, 1/16" x 50” Cable; 54" Conduit
Hex Nut, 1/4-28
Tinnerman Nut
Nylon Cable Guide
THROTTLE Kit
(Less Rod)
#2278
Rod Anchor, .160" (8 ga)
Rod Anchor, .375" (3/8)
2280
FOOT PEDALS
 Zinc Plated w/Built-In Stop
 Mounting Bolt,
5/16-18 x 1-3/4"
 4 Position Rod Mounting
8216
2360
2383
1751
8500
8505
2381
CLEVIS & PIN - FORGED
Strong, versatile, zinc plated, forged
steel clevis. Shank drilled and tapped
for 1/4-28 or 10-32. Clevis pin has
cotter pin hole.
Brake PEDAL
#1806
8182
8176
THROTTLE PEDAL
#1811
For dimensions, see page 35
Page 34
308
Clevis, Forged - 1/4-28
Clevis, Forged - 10-32
Clevis Pin
Cotter Pin
8354
8314
8355
8419
WELDMENTS
’s
A z u s aE N T S
M
WELD
In response to OEMs who require custom designed welded
assemblies, we provide the following weldable steel components
of Azusa-design assemblies.
8236
8230
8238
8173
SIDE 2
SIDE 1
8172
8237
8239
8182
8129
8130
8127
8128
8171
8181
SPINDLE AXLES
hub for steel disc
1" ID x 2" OD x 1/2" wide, two 5/16-18
set screw holes, and 1/4" keyway
8236
Hub, 1” Bore, Long
1" ID x 1-1/2" OD x 2.75" long, with
1/4" x 1-5/16" OD shoulder. 1/4" keyway, with set screw hole opposite.
8237
tube, TAPERED bearing hub,
2" OD x 1.782" ID x 3-5/8" long
8238
tube, bearing hub
1-5/8" OD x 1-3/8" ID x 3-1/2" long
8230
hub, 1" bore, SHORT
1" ID x 1-1/2" OD x 1-1/2" long.
5/16-18 set screw hole w/1/4" keyway.
8239
bearing hanger, 1" axle
3-1/2" SQ x 1/4" thick, 5/16"
hole pattern for two and three
hole bearing flangettes.
8127
bearing hanger, 1-1/4” axle
4" x 4-1/4" x 1/4" thick. 5/16" holes
for two and three hole bearing
flangette pattern.
8130
spindle bracket, 1/2" kingpin
8181
2-1/2" between ears, 1-1/4" clearance
to bolt centerline. 1/4" thick x 1-3/16"
wide. for 1/2" kingpin.
bearing hanger, jackshaft
1-3/8" ID x 3" OD w/2" mounting
edge x 1/4" thick
8128
spindle arm (side 1)
3-3/4" x 1" with support wedge
x 1/8” thick 5/16” bolt hole.
8172
spindle axles - unplated
5/8-18 x 3.75"
5/8-18 x 4.50"
5/8-18 x 6.00"
3/4-16 x 3.75"
3/4-16 x 4.50"
3/4-16 x 6.00"
spindle arm (side 2)
3-3/4" x 1" with support wedge
(opposite from side one) x 1/8" thick.
5/16" bolt hole.
8173
pitman arms
5/8" shaft hole, 5/16" bolt hole,
5 ga. (.210") 1-5/8" center to
center with 3/16" offset
spindle bracket, 5/8" kingpin
2-1/2" between ears, 1-1/4" clearance
to bolt centerline. 1/4" thick
x 1-3/16" wide. For 5/8" kingpin.
8171
rod anchors (for 1/4" rod)
1-3/8" x 3/4" x 8 ga. (.160") thick
with 1/4" hole.
1-3/8" x 3/4" x 3/8" (.375") thick
with 1/4" hole.
8445
8457
8472
8444
8458
8471
8129
8182
8176
Page 35
308
AIN
R
T
E
V
DRI cessories
Ac
LOCKING COLLARS
 English & Metric Sizes  Skin-Packed* or Bulk
 Two Material Types:
Steel or Billet Aluminum
 Split & One-Piece
*To order skin-packed product, simply add a “-PK” to the part no.
(Hardware
Included)
SPLIT COLLARS
KEYS & KEYSTOCK
DESCRIPTION
PART
3/16" x 3/16" x 3/4"
3/16" x 3/16" x 1-1/4"
3/16" x 1/4" x 1-1/4"
3/16" x 1/4" x 12"
1/4" x 1/4" x 1-1/4"
1/4" x 1/4" x 12"
5/16" x 5/16" x 12"
7mm x 7mm x 12"
8454
8442
8434
8404
8435
8403
8408
8402
ID
ONE-PIECE
COLLARS
ID
OD
(w/o Keyway)
WIDTH
1/4"
1/2"
5/16"
5/8"
1"
3/8"
5/8"
1-1/8"
1/2"
3/4"
1-1/4"
9/16"
1"
1-5/8"
5/8"
Set Screw Included
MATL.
PART
Steel
Steel
Steel
Steel
Steel
8562
8555
8554
8560
8565
KW
MATERIAL
PART
1"
1-1/4"
40mm
50mm
1-3/4"
1/2"
2"
1/2"
2-1/2"
1/2"
73mm" 15mm
OD
WIDTH
1/4"
1/4"
5/16"
8mm
Billet Alum.
Billet Alum.
Billet Alum.
Billet Alum.
8578
8579
8580
8569
3/4"
1"
1-1/4"
1-3/8"
35mm
40mm
50mm
1-3/4"
1-3/4"
2"
2-1/4"
2-1/4"
2-1/2"
73mm
1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
8mm
Steel
Steel
Steel
Steel
Steel
Steel
Steel
8551
8557
8558
8559
8553
8552
8568
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
15mm
JACKSHAFT KITS
COMPLETE KITS
description
use with
part
Jackshaft Kit, 5/8" x 10"
Jackshaft Kit, 5/8" x 12"
Jackshaft Kit, 5/8" x 14"
Jackshaft Kit, 3/4" x 14"
#35 Chain
#35 Chain
#35 Chain
#40 Chain
1826-10
1826-12
1826-14
1824-14
JACKSHAFTS ONLY
OD
length
keyway
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
4.5"
10.0"
12.0"
14.0"
16.0"
10.0"
14.0"
19.0"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
part
8175-4
8175-10
8175-12
8175-14
8175-16
8183-10
8183-14
8183-19
Components for #35 Chain
description
part
13 Tooth Sprocket, 5/8" ID
18 Tooth Sprocket, 5/8" ID
Bearing Hanger (2 required)
10"
Choice of one
12"
5/8"Jackshaft w/ 14"
3/16" Keyway Sealed, Precision Bearings (2 required)
Keys, 3/16" x 3/16" x 3/4" (2 required)
Collar, 5/8" ID
2127
2132
8128
8175-10
8175-12
8175-14
8205
8454
8554
}
SWING MOUNT KIT
Components for #40 Chain
description
part
10 Tooth Sprocket, 3/4" ID
14 Tooth Sprocket, 3/4" ID
Bearing Hanger (2 required)
Jackshaft, 3/4" x 14", 3/16" Keyway
Standard Bearings, 3/4" ID (2 required)
Keys, 3/16" x 3/16" x 3/4" (2 required)
Collar, 3/4" ID
2110
2114
8128
8183-14
8201
8454
8560
description
part
Complete Assembly
Hardware Only
1879
1878
components
description
This Swing Mount Kit will fit most
vehicles with a 1” Live Axle. The engine mounting
plate allows you a variable angle. Can be used with
two or three hole flangettes.
Page 36
308
Steel Mounting Unit
Bearings, with Hub, 1" ID
Flangettes, 2 Hole
Rubber Grommets
Grommet Washers
Bolt, 5/16-18 x 1-3/4"
Bolts, 5/16-18 x 3/4"
Locknuts, 5/16-18
needed
part
1
2
4
2
2
1
4
5
8155
8211
8212
8316
8317
8407
8421
8510
INE
G
N
E
&
FU E Lc c e s s o r i e s
A
QUALITY FITTINGS
8334
8336
8330
8332
8338
8335
1817
8333
Description
Valve, single with Filter 1/8" N.P.S.C.
Plug, 1/8" N.P.T.
90° Elbow with Filter 1/8" N.P.S.C.
8345
8342
Part
Description
Part
Description
Part
8334
8335
8332
Valve, single 1/8" N.P.S.C.
Fitting, 1/8" straight N.P.S.C.
Tank Drain Fitting - 1/8" P.T.
Fuel Line Adapter Kit
8336
8330
8333
1817
Fitting, 90° Elbow 1/8" N.P.S.C.
“T” Fitting Delrin®
“Y” Fitting Delrin®
8342
8338
8345
POLYURETHANE FUEL LINE
#1887
FENDER WASHERS
Zinc Plated
Popular Sizes
Many Uses
(For Other Washers
See Page 49)
Twice the tensile and burst strength of vinyl
and many times the abrasion resistance,
this tough urethane Fuel Line will withstand
millions of flexes. Low kinkage and excellent
grab. The best! 1/4" ID x 3/8" OD.
DIMENSIONS
PART
DIMENSIONS
PART
3/16" ID x 1" OD
3/16" ID x 1-1/4" OD
1/4" ID x 1" OD
1/4" ID x 1-1/2" OD
8371
8372
8373
8374
3/8" ID x 1-1/2" OD
3/8" ID x 2" OD
1/2" ID x 1-1/2" OD
1/2" ID x 2" OD
8375
8376
8377
8378
ENGINE MOUNTING PLATES
Description
Part
8-3/4" x 7-3/4" - with lips
5" x 12" - flat
8191
8190


11/16
3/4
3-3/16
Heavy Gauge Steel
Slotted Mounting Holes
5
2-3/4
RUBBER GROMMET KIT
#1883
5/16
7-3/4
2-3/4
5
12
5/16
1
6-3/8
8-5/8
 Fairing Mounts
 Engine Shock-Mounts
Description
3-5/16
1
COMPONENTS
KIT
Rubber Grommets
5/16 x 1-1/4” Washers
1/2
8
8
BULK
8316
8317
Page 37
308
BLES
A
C
L
O
C O N TnRd F i t t i n g s
a
7 x 7 Cable. Seven strands of
seven wires each. Very flexible.
Recommended for twist grip use.
1 x 19 Cable. One strand on 19 wires.
Less flexible but stronger. Recommended for brake assemblies.
LINED CONDUIT
STRANDED CONTROL CABLE
Galvanized with Swaged Ball
Poly-Lined – Cut to Length
PRE-CUT LENGTHS
CABLE
DIAMETER
CONDUIT
DIAMETER
COVER
O.D.
This poly lined
conduit not
only allows for
smoother cable
operation but it
prevents
corrosion
between cable
and sheathing
as well.
CABLE
FOR
DIAMETER LENGTH CONDUIT
3/64
54"
3/16
3/64
64"
3/16
3/64
84"
3/16
3/64
120"
3/16
3/64
120"
3/16
1/16
12"
7/32
1/16
54"
7/32
1/16
96"
7/32
1/16
96"
7/32
1/16
120"
7/32
5/64
56"
1/4
5/64
60"
1/4
5/64
60"
1/4
5/64
64"
1/4
5/64
84"
1/4
5/64
84"
1/4
5/64
120"
1/4
3/32
68"
9/32
*#2308 & #2334 have a barrel end.
7x7
TYPE
2306
2327
2328
2308*
2323
2324
2301
2329
—
2325
2326
—
—
—
—
—
—
—
PRE-CUT LENGTHS
1 x 19
TYPE
2307
—
2304
—
—
—
2302
2300
2330†
—
—
2305
2305-6MM
2334*
2303
2303-6MM
2321
2331
CONDUIT COVER
FOR
DIAMETER
OD
LENGTH CABLE
3/16
.218
50"
3/64
3/16
.218
58"
3/64
3/16
.218
78"
3/64
7/32
.255
50"
1/16
7/32
.255
92"
1/16
7/32
.255
116"
1/16
1/4
.278
54"
5/64
1/4
.278
78"
5/64
9/32
.310
60"
3/32
9/32
.310
66"
3/32
Conduit is available in any length. Call for quote.
BULK CONDUIT - 50 Foot Rolls
DIAMETER
3/16
7/32
1/4
9/32
†#2330 has a stainless steel hex end for applications near heat.
-6MM #2305-6MM & #2303-6MM have large (6mm) swaged ball ends.
DIAMETER
3/64
1/16
5/64
7x7
TYPE
2343
2340
—
Conduit Part
1 x 19
TYPE
2344
2341
2342
Conduit Clip-7/8" Tube
Conduit Clip-1" Tube
Conduit Clamp
Conduit Retainers
Conduit Button
Cable Guide
CONTROL CABLE FITTINGS
OD
ID
LENGTH
CABLE DIA.
1/4
8-32
3/8"
3/32 Max.
1/4
8-32
.240"
PART
3/32 Max.
2361
Clevises
3/32 Max.
2366
1/16" Hole 3/8" Wide
1-1/4"
1/16 Max.
8157
(For 3/16 Ball)
1/4"
3/8"
1/4"
3/8"
.350
.350
.350
.438
Wire Swivels
1-1/8"
—
—
—
—
Springs
2360
1/4" Hole 1/2" Wide
1/4
1/4
9/32
3/8
OD
Wire Stops
.316
.375
.437 x.312
.437 x.312
2365
2362
2363
2364
1/4-28
5/8"
3/64 Max.
1/4-28
1"
3/32 Max.
2314
2315
2322
2375
2377
2379
2372
2373
2386
2369
—
2375
2377
2380
—
—
2387
2370
—
—
—
2380
—
—
—
—
2394
LENGTH CONDUIT PART
1/4
1/4
1/4
5/16
.260
.290
2318
1-7/8
2-1/4
3
3-1/8
7/32
7/32
7/32
1/4
2383
2392
2391
2390
3/4
3/4
7/32
1/4
2369
2370
.225 x.100
.275 x.100
3/16
9/32
2381
2394
3/4
7/8
Conduit Retainers - Straight
5/16-24
5/16-24
.260
.287
2
2
7/32
1/4
Conduit Retainers - Stepped
5/16-24
1/4-28
5/16-18
2367
.260
.260
.312
Conduit Clamps
ROD / CABLE COUPLERS
5/8
PART
2318
2314
2315
2322
2374
2377
2379
—
—
—
—
2381
GRIP ADAPTeR/CABLE GUIDE
CABLE ANCHORS
5/16
ID
Conduit Buttons
Ball Adapters
3/32 Max.
3/32 Max.
3/32 Max.
3/32 Max.
FOR CABLE
3/64
1/16
5/64
3/32
COMpatibility chart
BULK CABLE - 50 Foot Minimum
FOR
CONDUIT
3/16
7/32
1/4
—
—
2389
7/32
1/4
Conduit Clips
7/8" Tube
1" Tube
Page 38
308
PART
2318-50
2318-58
2318-78
2314-50
2314-92
2314-116
2315-54
2315-78
2322-60
2322-66
—
—
1
1-1/2
1-5/16
7/32
7/32
—
2386
2387
2372
2373
2371­
—
—
3/16 & 7/32 2379
1/4 & 9/32 2380
—
—
7/32, 3/16 & 1/4 2374
7/32 & 1/4
2377
THROTTLE ASSEMBLIES
 7 x 7 Cable, 1/16" OD x 54"
DELUXE #2352
(Lined Conduit)
rake
B
&
e
l
Thrott TROL S
CON
 Fits 7/8" OD Handle Bars
 Dummy Grip Included
 With 50" Premium Lined Slippery Conduit
 Or, 50" Flexible Unlined Conduit
FOAM DUMMY
GRIP #2347
DESCRIPTION
7/8"
1"
Throttle Kit, 50" Cable & Lined Conduit
Throttle Kit, 50" Cable & Unlined Conduit
Throttle Kit Less Cable & Conduit
Matching Dummy Grips Only
Foam Dummy Grips Only
2352
2359
2350
2349
2347
—
—
—
2348
—
THROTTLE
We can make control cable assemblies to your specs
from components
on page 38. Check
with our sales department.
Throttle
Brake
Brake
Brake
(Unlined Conduit)
CONTROL CABLES
O.E.M.s:
Application
ECONOMY #2359
BRAKE

Cable CABLE
Length
OD
54"
64"
56"
56"
1/16"
5/64"
5/64"
5/64"
CONDUIT
Length
End CAP
OD
Part
50"
60"
52"
48"
.210
.370
.370
.370
1751
1752
1753
1754
PROFESSIONAL BRAKE LEVER
#1731
Excellent Quality
 Low Price
 Installed Conduit Caps
 Split Mounting Collar
 Rugged Steel Handle
with Classic Ball End
 Complete with Adjusting Hardware
REPLACEMENT
ADJUSTER
#2371
Page 39
308
eous
n
a
l
l
e
c
Mis sories
Acces
STEEL BUSHINGS - SPACERS - 1" OD
REDUCER BUSHINGS / SPACERS
MATERIAL
OD
ID
Steel
Steel
Nylon
Nylon
Nyliner-Split
Aluminum
5/8"
3/4"
13/16"
15/16"
11/16"
1-1/4"
1/2"
5/8"
5/8"
3/4"
5/8"
1"
LENGTH
PART
3/4"
5/8"
13/16"
15/16"
7/8"
1-1/4"
2184
8271
8328
8329
8215
8362
ID
LENGTH
PART
ID
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1/4"
5/8"
3/4"
7/8"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2-1/4"
2-1/2"
5"
8366
8368
8350
8324
8363
8321
8367
8380
8323
8318
8356
8357
8369
8358
11/16"
11/16"
3/4"
3/4"
3/4"
3/4"
3/4"
5/8 " & 1" Diameters
7 Lengths Available
Locknuts
length
THREAD
THREAD LENGTH
part
6-3/4"
8"
8-3/4"
10"
14"
16"
18"
5/8-18
5/8-18
5/8-18
5/8-18
1-14
1-14
1-14
1"
2"
1"
2"
1-1/2"
1-1/2"
1-1/2"
8121-7
8120-8
8121-9
8120-10
8122-14
8122-16
8122-18
3.75"
4.00"
4.75"
TIRE SIZE
14.5"
18.0"
18.0"
4", 5", 6"
8"
6", 8"
8359
8327
8325
8364
8361
8320
8360
Any size
available
in O.E.M.
quantities.
part
1/2-20
5/8-18
5/8-11
3/4-16
3/4-10
1-14
8514
8515
8509
8516
8517
8538
JAM NUTS
thread
part
(for other nuts,
see page 49)
7/16-20
1/2-20
5/8-18
3/4-16
8513
8542
8524
8525
DEEP DRAWN STEEL FENDERS
 For 4", 5", 6" and 8" Wheels
 Cold Rolled Steel
 Chromed or Unplated
LENGTH
1-1/4"
2-7/16"
1/2"
5/8"
1-1/4"
1-5/8"
1-7/8"
thread
Thin Profile,
Nylon Insert
HEIGHT
PART
AXLE NUTS
mini axles - STEEL


LENGTH
KICKSTAND &
WELDABLE BRACKET
MAX.
PART
WIDTH CHROMED UNPLATED
4.2"
4.0"
5.5"
1857
1830
1866
1855
1829
1865
Page 40
308
Description
Part
Kick Stand & Bracket Set
1727
nical
a
h
c
e
c & M rbers
i
l
u
a
r
d
Hy
bso
A
k
c
o
Sh
HEAVY DUTY HYDRAULIC SHOCK ABSORBERS





Variable Pitch Biconical Spring
Dual-Chamber Hydraulic
Progressive Dampening
Additional sizes
available in
O.E.M. quantities.
Three Way Adjustable
Top Performers
#1700-236 PICTURED
MAX. INCHES
COMPRESSION
TOTAL LOAD
COMPRESSION
EYE TO EYE
INCHES
HOLE
ID
1700-230
2.4"
650 lbs.
12.0"
12mm / .47"
1700-236
2.4"
730 lbs.
12.0"
12mm / .47"
PART
NOTE:
Part No. 1700-230
has a red spring. Part
No. 1700-236 has a
chrome spring.
HYDRAULIC SHOCK ABSORBERS

Additional sizes
available in
O.E.M. quantities.
Single-Chamber Hydraulic

Compact Size Envelope

Black Spring
#1700-128 PICTURED

MAX. INCHES
COMPRESSION
TOTAL LOAD
COMPRESSION
EYE TO EYE
INCHES
HOLE
ID
1700-128
2.5"
500 lbs.
12.0"
10mm / .39"
1700-246
3.0"
730 lbs.
12.0"
10mm / .39"
PART
Excellent Value
MECHANICAL SHOCK ABSORBERS



Chrome-Plated Spring
3-Way Adjustable
Additional sizes
available in
O.E.M. quantities.
Mini-Bike Ranges
#1700-19 PICTURED
MAX. INCHES
COMPRESSION
TOTAL LOAD
COMPRESSION
EYE TO EYE
INCHES
HOLE
ID
1700-19
2.0"
450 lbs.
12.0"
12mm / .47"
1700-15
2.0"
450 lbs.
12.0"
3/8" / .375"
PART
Page 41
308
i-Bik
n
i
M
K a r t &U T CH E S
CL
e
KART & MINI BIKE
4 CYCLE CENTRIFUGAL CLUTCHES
4 Cycle Clutches For 1" Shaft
chain size
#35
#40/41
shaft dia
teeth
part
1"
1"
12
10
2229
2228
 Sintered Metal Clutch Shoes
 Available in 5/8" , 3/4" and 1" Bore
 Smooth Positive Engagement @ 1,800 to 2,000 rpms
 For #35, #40 or #41 Chain
4 Cycle Clutches For 5/8" & 3/4" Shafts*
 Works Clockwise or Counterclockwise
CHAIN SIZE SHAFT DIA
TEETH
PART
#35
5/8"
11
2221
 Four Cycle Engines, 2-1/2 to 7 HP
#35
5/8"
12
2222
#35
#35
#40/41
#40/41
3/4"
3/4"
5/8"
3/4"
12
13
10
10
2224
2225
2223
2220
*Keys (3/16" x 3/16" x 1/2") not included; order part #8498




“DRAGGIN-SKIN” 4 CYCLE RACING CLUTCH
3 Interchangeable #35 Chain Sprockets, 4 Spring Sets
3/4" B ore
Engagement at 2,800 to 4,500 rpms
Bonded, Non-Asbestos Resin Linings
Draggin-Skin Clutch #2230
The “Draggin Skin” clutch is for all four-cycle kart racers who want consistency in engagement with
flexibility in tuning the clutch. Interchangeable drive sprockets have 13, 14 and 15 teeth. The springs
can be used in sets or mixed. Full instructions included.
Page 42
308
ibut
r
t
s
i
D
M a j o rR O D UC T S
P
KART
RACING TIRES
SLICK
RAIN
TIRE
5" RACING KART TIRES
6" RACING KART TIRES
BRIDGESTONE TIRES
size
COMPOUND / AZUSA PART NO.
4.5/10.5-5
6.0/11.0-5
7.1/11.0-5
or
YJA4
YJA6
YJA7
YJB4
YJB6
YJB7
YJP4*
YJP6*
—
YHC4
YHC6
YHC7
BRIDGESTONE size
YJL4
YJL4
YJL7
FIRESTONE
COMP / PN
5.0/10.5-6
6.5/11.5-6
8.0/12.0-6
YFA5
YFA6
—
YBH5
—
YBH8
COMP / PN
YFF5
YGF5­—
YFF6­—
YJF6
—
YGF8
YJF8
*Rain Tires
SOFT
YJA
•
YJB
•
YHC
•
YJL
SOFT
HARD
YFA • YGF • YFF • YBH • YJF
Compounds are periodically updated; call to confirm availability.
HARD
For other tires, see pages 12-13
DRIVER
PROTECTIVE
GEAR
CHEST PROTECTOR
1304-SM1
1304-SM2
ORIGINAL RIBTECT
VEST
 Sizes (Age): Sm1 (5-8), Sm2 (9-12)
 WKA, IKF & SFI 20.1 Approved
 2 Layers Polypropylene Plastic
 Black Cordura Nylon
 Shock-Absorbing Foam
 Adjustable Straps
ORIGINAL RIBTECT VESTS
JUNIOR SIZES
RIBTECT 2
VEST
 All Orignial Vest Features
 Carbon Fiber Contured Panels
 Improved Vest Quality
RIBTECT 2: CARBON FIBER VESTS
ADULT SIZES
JUNIOR SIZES
ADULT SIZES
Size
Azusa PN
Size
Azusa PN
Size
Azusa PN
Size
Azusa PN
28
30
32
34
1301-28
1301-30
1301-32
1301-34
36
38
40
42
44
46
48
50
1311-36
1311-38
1311-40
1311-42
1311-44
1311-46
1311-48
1311-50
28
30
32
34
1302-28
1302-30
1302-32
1302-34
36
38
40
42
44
46
48
50
1312-36
1312-38
1312-40
1312-42
1312-44
1312-46
1312-48
1312-50
Small
Medium
Large
Extra Large
For additional size information,
call us or visit ribtect.com
Small
Small/Medium
Medium
Medium/Large
Large
Extra Large
XX Large
XXX Large
Small
Medium
Large
Extra Large
For additional size information,
call us or visit ribtect.com
Small
Small/Medium
Medium
Medium/Large
Large
Extra Large
XX Large
XXX Large
Page 43
308
its &
K
t
a
e r Styles
S
t
r
a
k t Cove
Sea
KART SEAT COVERS
 Top Quality Black Vinyl
 Choice of Six Sizes
 Generous Foam Backing
 Priced Right
STYLE
O.E.M.s: We can manufacture seat covers to
your specs. Please inquire
with our sales department.
Jr. Rookie (Cadet)
Rookie
Medium
Large
X-Large
XX-Large
FOR fiberglass seats
FOR “rib hugger” seats
1656
1655
1653
1654
1651
1649
—
—
1643
1644
1642
—
BUCKET SEATS & KITS



Expanding Anchors for Positive Mounting
Molded, High Impact Nylon Seat
Reinforced Mounting Sockets
Description
Bucket Seat Kit, Complete, with Cover
Bucket Seat Kit, Complete, Less Cover
Bucket Seat w/Mounting Hardware Only (no brackets)
Seat Bracket Kit Only
upholstered bucket seat covers
Bucket Seat Cover, Deluxe
components
Bucket Seat
Bracket, 19-1/2" Centers
Bracket, 18-1/2" Centers
Bolt, 5/16-18 x 1-3/4" (4 req.)
Locknut, 5/16-18 (4 req.)
Anchor, Expanding (4 req.)
Anchor Bolts, 1/2" x 2" (4 req.)
Clamps (4 req.)
Part
2291
2290
8192
2288
1645
8196
8193
8194
8407
8510
8461
8462
8346
Page 44
308
S E AsT S
E
BIK
M I N IA- c c e s s o r i e
&
MINI-BIKE SEATS
 Sturdy, Thick Mounting Base
 Dense Foam
 Threaded Inserts for Positive Mount
 High Quality Covers
Threaded inserts
installed in seat base
7/8"
1-3/16"
9-7/8"
9-7/8"
¡w
£2
¡w
£2
MOUNTING
HOLE
PATTERNS
O.E.M.s: We can manufacture seats
or covers to your specs. Please
inquire with our sales department.
FOLDING FOOT PEGS



Description
Part
Mini Bike Seat, 12" Plush
1632
Mini Bike Seat, 19" Plush
1633
NON-SLIP MOUNTING CLAMPS
Long Mounting Studs
Sturdy Rubber Treads
Folds When Not In Use



Case Hardened for Bite
For 3/4", 7/8" or 1" Tubing
Heavy Duty
description
part
description
part
Folding Foot Pegs, Pair, Packaged
Folding Foot Pegs, Pair, Bulk
Folding Foot Pegs, Pair, with Clamps
1740
1739
2239
Non-Slip Clamps, Set, 4 Halves Packaged
2209
Non-Slip Clamps, Bulk (Each)
8162
Page 45
308
E
F R AtMo r
E
BIK
M I NdI -P a r t s L o c a
an





MINI-BIKE FRAME
Rugged Construction
No Welding Needed
Economical, Versatile
Other Components On Hand
13-5/8" Engine Clearance
description
Part
Mini-Bike Frame & Fork Kit
Mini-Bike Frame
Mini-Bike Fork & Bolt Set
Includes, in addition to Fork:
Bolt - Fork to Frame, 5/8-18 x 6"
Locknut, 5/8-18, Thin, Nylon Insert
3545
3548
3546
8472
8515
Twist Grips
(see page 39)
Jig welded from high quality 7/8" O.D. by .083" wall tubing, this Fork
& Frame set is designed to accommodate up to and including 17.5"
O.D. mounted tires and comes complete with engine mounting plate,
front axle holes and rear axle mounting tabs. No additional welding
is required. Most components needed to complete the mini bike are
available from Azusa’s shelves. Total weight with Fork: 19 pounds.
Sprocket & Drum
Mini Bike Seats
(see page 17)
Brakes (see page 17)
(see page 45)
(Suggested Brake
Actuator
Position)
Brake Levers
(see page 39)
Forks &
Frames
Fenders
(see above)
Clutches
(see page 40)
(see page 42)
Conduit & Cable Hardware
(see page 38, page 39)
Tires (see page 12, page 13)
Nuts (see page 49)
Clamps
(see page 45)
Chain (see page 23)
Axles (see page 40)
Kick Stands (see page 40)
Spacers (see page 40)
Foot Pegs (see page 45)
Wheels (see page 4, 5, 6, 8, 9)
ILLUSTRATED MINI-BIKE PARTS LOCATOR
Page 46
308
KART FRAME
This sturdy, double tube construction, high quality unit is jig-welded and made of 1" OD
x .083" wall steel tubing. Comes complete with steering hoop assembly, engine mounting
plate, spindle brackets, steering shaft bushing, pedal bushings, live-axle bearing hangers
and control rod anchors. Well designed and rugged, the frame weighs just 31 lbs.
5-5/8"
E
RAM
F
T
t
R
KA rts Loca or
& Pa
21-3/4"
48"
41"
KART FRAME WITH
STEERING HOOP #3502
 Low Cost - High Quality
 No Additional Welding Needed
 All Components In Catalog
 Steering Hoop Included
26"
Kart Seats & Covers
(see page 44)
Azusa Brake / Uni-Hub Kit
(see pages 18, 24)
Steering Wheels
(see page 32)
Throttle Assemblies
Tires & Tubes
(see pages 12 - 13)
(see page 39)
Wheels
Brake Spacer
(see pages 4, 5, 6, 8, 9)
(see page 18)
Foot Pedals
(see page 34)
Brake Rod Kits
(see page 34)
Tie Rods & Rod Ends
Axles
(see pages 14, 15)
(see page 20 - 21)
Sprockets & Chain
(see pages 23, 25)
Uni-Hub
(see page 24)
Spindles
(see page 31)
Bearing Kits
(see page 22)
ILLUSTRATED KART PARTS LOCATOR
Page 47
308
ike
B
i
n
i
M
K a r t & B LY KI T S
ASSEM
KART KITS
Azusa Kart Kits are compiled from the quality components in
this catalog. These parts, sub-assemblies and hardware offer
your customer a Kit designed to provide everything necessary to
assemble a Kart - with the assurance that the parts fit, the hardware
is the proper size and quantity and the weldments and subassemblies conform to Azusa’s standards of form, fit and function.
Assembly instructions and parts lists for each kit are included. We
do not supply engines... and therefore we do not preselect a clutch,
although we carry a complete line of clutches in this catalog.
Description
Part
Kart Kit with 5" Nylon Wheels
3557
Kart Kit with 5" Aluminum Wheels
3551
Kart Kit with 6" Aluminum Wheels
3552
(For Clutches, see page 42)
MINI-BIKE KITS
Azusa offers four Mini-Bike Kits (see table for part numbers). The
kits contain identical components throughout, except for wheel size
and type. The tire and innertube sizes match the wheels selected.
Each kit provides everything needed to assemble a complete MiniBike, including: Frame, Fork, Upholstered Seat, Wheels, Tires,
Tubes, Controls, Grips, Foot Pegs, Axles, Sprockets, Brakes, Chain
and all the necessary attaching Hardware. All Kits are less Engine
and Clutch. Assembly instructions and parts list are included.
(For Clutches, see page 42)
Description
Part
Mini-Bike Kit - 5" Aluminum Wheels
3540
Mini-Bike Kit - 6" Aluminum Wheels
3541
Mini-Bike Kit - 8" Aluminum Wheels
3542
Mini-Bike Kit - 10" Chrome-Plated Steel Wheels
3544
Page 48
308
 High Quality Hardware (Grade 5)  Hard To Find Items
 Eliminate Down Time  Have Spares Available When You Need Them
BOLTS - HEX HEAD - Zinc Plated
1/4-20 x 1/2" Button Head
1/4-20 x 1/2"
1/4-20 x 5/8"
1/4-20 x 2-1/2"
1/4-28 x 1/2"
1/4-28 x 3/4"
1/4-28 x 1-1/2"
5/16-18 x 3/4"
5/16-18 x 1"
5/16-18 x 1-1/4"
5/16-18 x 1-1/2"
5/16-18 x 1-1/2" Fillster Head
5/16-18 x 1-3/4"
5/16-18 x 2"
5/16-18 x 2-1/4"
5/16-18 x 2-1/2"
5/16-18 x 2-3/4"
5/16-18 x 3"
5/16-18 x 3-1/4"
5/16-18 x 3-1/2"
5/16-18 x 3-3/4"
5/16-18 x 4"
5/16-18 x 4-1/2"
5/16-18 x 5"
1/2-20 x 1-1/4" *
1/2-20 x 3-3/4"
5/8-18 x 3-3/4" *‡
5/8-18 x 3-3/4"
5/8-18 x 4-1/2" *‡
5/8-18 x 6"*
3/4-16 x 3-3/4" *‡
3/4-16 x 4-1/2" *‡
3/4-16 x 6" *
*Unplated ‡Round Head
8405
8413
8410
8489
8463
8416
8415
8421
8422
8431
8487
8499
8407
8464
8449
8448
8450
8465
8466
8467
8453
8468
8469
8479
8459
8446
8445
8447
8457
8472
8444
8458
8471
BOLTS w/HOLE (1/16" Hole, 3/32" from End)
1/4-28 x 3/4"
1/4-28 x 7/8"
5/16-24 x 1-1/4"
5/16-24 x 2"
5/16-24 x 2-1/4"
5/16-24 x 3-1/2"
3/8-24 x 1-3/4"
3/8-24 x 2-1/4"
3/8-24 x 4"
8412
8423
8414
8486
8485
8428
8481
8482
8473
COLLARS, Zinc Plated, w/SET SCREWS
1/4" ID x 1.5" x 5/16" wide
5/8" ID x 1.00" x 3/8" wide
5/8" ID x 1.13" x 1/2" wide
3/4" ID x 1.25" x 9/16" wide
1" ID x 1-5/8" x 5/8" wide
8562
8555
8554
8560
8565
COLLARS, SPLIT w/ keyway & hardware
3/4" x 1-3/4" x 1/2" x 1/4" kw, Steel
1" x 1-3/4" x 1/2" x 1/4" kw, Steel
1" x 1-3/4" x 1/2" x 1/4" kw, Billet AL
1-1/4" x 2" x 1/2" x 1/4" kw, Steel
1-1/4" x 2" x 1/2" x 1/4" kw, Billet AL
1-3/8" x 2-1/4" x 1/2" x 1/4" kw, Steel
35mm x 2-1/4" x 1/2" x 5/16" kw, Steel
40mm x 2-1/2" x 1/2" x 5/16" kw, Steel
40mm x 2-1/2" x 1/2" x 5/16" kw, Billet AL
50mm x 73mm x 15mm x 8mm kw, Billet AL
50mm x 73mm x 15mm x 8mm kw, Steel
8551
8557
8578
8558
8579
8559
8553
8552
8580
8569
8568
HOSE CLAMPS - SPRING
For 1/4" ID Full Line - 3/8" ID
For Bucket Seat - 11/16" ID
8347
8346
y
Q u a l i t R DW A R E
HA
COTTER PINS
1/16"x 1/2"
3/32" x 3/4"
8419
8418
KEYS - MACHINE
3/16" x 3/16" x 1/2"
3/16" x 3/16" x 3/4"
3/16" x 3/16" x 1-1/4"
3/16" x 1/4" x 1-1/4"
3/16" x 1/4" x 12"
1/4" x 1/4" x 1-1/4"
1/4" x 1/4" x 12"
5/16" x 5/16" x 12"
7mm x 7mm x 12"
8498
8454
8442
8434
8404
8435
8403
8408
8402
KEYS - WOODRUFF
3/8" x 3/32" (#212)
1/2" x 1/8" ( #3 )
8432
8433
HEX NUTS
6-32
10-32
1/4-28
5/16-18
5/16-24
3/8-24
8mm
8539
8508
8500
8519
8501
8507
8522
JAM NUTS
1/4-28
1/4-28 Left Hand
5/16-24
5/16-24 Left Hand
8mm
8mm Left Hand
3/8-24
3/8-24 Left Hand
7/16-20
1/2-20
5/8-18
3/4-16
8531
8537
8523
8529
8540
8541
8512
8530
8513
8542
8524
8525
LOCKNUTS
1/4-20 (N)
5/16-18(N)
5/16-24(N) Thin
3/8-24(N) Thin
3/8-16 All Steel
3/8-24 All Steel
1/2-20(N) Thin
5/8-11(N) Thin
5/8-18(N) Thin
3/4-10(N) Thin
3/4-16(N) Thin
1-14 (N) Thin
(N) = Nylon Insert
8502
8510
8533
8534
8504
8503
8514
8509
8515
8517
8516
8538
LUG NUTS
1/2-20
8532
SLOTTED NUTS
1/4-28
5/16-24
3/8-24
1/2-20
5/8-18
5/8-18 Thin
3/4-16
8527
8535
8536
8528
8521
8518
8511
TINNERMAN NUT
For .225 Brake Rod
SET SCREWS
8-32 x 1/8"
8-32 x 1/4"
1/4-28 x 1/4"
1/4-20 x 1/4"
1/4-20 x 1/2"
5/16-18 x 3/8"
6mm x 7mm Fine
6mm x 6mm
SMALL SCREWS
8-32 x 1/4" Filister Head
10-32 x 3/8" Fillister Head
10-32 x 3/4" Phillips Pan Head
SNAP RINGS
For 5/8" Steering Shafts
For 25mm Axles
For 40mm Axles
For 1" Axles
For 1-1/4" Axles
For 1-3/8" & 35mm Axles
For 1-1/2" Axles
SOCKETHEAD CAP SCREWS
10-24 x 1"
10-32 x 3/8"
10-32 x 5/8"
10-32 x 3/4"
10-32 x 1-1/4"
1/4-20 x 1/2"
1/4-20 x 7/8"
1/4-20 x 1"
1/4-20 x 1-1/4"
1/4-20 x 1-1/2"
1/4-28 x 3/8"
1/4-28 x 1/2"
1/4-28 x 5/8"
1/4-28 x 7/8"
5/16-18 x 1"
3/8-16 x 3/8"
3/8-16 x 3/4"
3/8-16 x 1-1/4"
3/8-16 x 1-3/4"
WASHERS, Zinc Plt. I.D.
O.D.
Flat
3/16"
1"
Flat
3/16"
1-1/4"
Flat
1/4"
5/8"
Flat
1/4"
1"
Flat
1/4"
1-1/2"
Flat
3/8"
13/16"
Flat, unplated
1/2"
3/4"
Fender/Grommet 5/16"
1-1/4"
Fender
3/8"
1-1/2"
Fender
3/8"
2"
Fender
1/2"
1-1/2"
Fender
1/2"
2"
Dust Shield
5/8"
1.76"
Dust Shield
3/4"
1.76"
Lockwasher-Split 5/16"
Lockwasher-Split 5/16"
Lockwasher-Split 1/2"
8505
8490
8484
8470-F
8470
8474
8483
8406
8382
8460
8440
8497
8322
8341
8339
8343
8340
8348
8344
8478
8476
8477
8480
8475
8441
8437
8493
8492
8491
8494
8495
8496
8496-M
8438
8439
8384
8386
8387
PART
8371
8372
8353
8373
8374
8370
8304
8317
8375
8376
8377
8378
8305
8301
8302
8306
8303
Page 49
308
Karts and Parts - Price List
Prices are subject to change without notice. Contact Karts and Parts to confirm prices.
All prices are FOB South Wales, N.Y. Orders under $25.00 will incur a minimum order charge of $10.00
1004
$ 25.95
1075
$ 24.25
1149
$
38.95
1401-44
$ 52.50
1422-44
1005
$ 33.50
1077
$ 29.75
1150
$
54.95
1401-54
$ 62.50
1422-48
$ 96.50
$ 102.95
1006
$ 43.50
1078
$ 26.95
1151
$
62.50
1402-36
$ 44.50
1423-40
$ 87.95
1010
$ 17.95
1104 $ 58.95
1152
$
56.95
1402-38
$ 46.50
1423-44
$ 90.95
1105 $ 57.95
1153
$
55.95
1402-40
$ 48.50
1022
$ 9.95
1106 $ 55.95
1154
$
55.95
1402-42
$ 50.50
1424-26
$ 88.95
1025
$ 14.95
1107 $ 56.95
1158
$
8.95
1403-22
$ 32.50
1424-28
$ 88.95
1026
$ 16.95
1159
$
10.25
1403-30
$ 39.95
1424-32
$ 88.95
1028
$ 33.50
1108 $ 49.95
1160
$
11.50
1403-38
$ 46.50
1424-34
$ 88.95
1110 $ 54.95
1161
$
12.50
1403-40
$ 48.50
1424-36
$ 89.95
1030
$ 21.25
1111 $ 56.95
1162
$
2.95
1405-41
$ 29.95
1424-38
$ 90.95
1031
$ 15.50
1112 $ 65.95
1163
$
4.35
1409
$ 1.25
1424-40
$ 91.95
1032
$ 27.50
1113 $ 64.95
1164
$
4.60
1411-36
$ 47.95
1033
$ 23.50
1114 $ 62.75
1165
$
4.95
1411-38
$ 49.95
1424-42
$ 98.50
1034
$ 30.25
1115 $ 61.75
1175
$
54.95
1411-40
$ 52.25
1424-44
$ 98.50
1035
$ 24.80
1117 $ 53.95
1176
$
53.95
1411-42
$ 54.50
1424-46
$ 105.95
1041
$ 15.95
1121 $ 49.95
1177
$
53.95
1411-44
$ 56.50
1424-48
$ 105.95
1042
$ 20.50
1122 $ 59.50
1178
$
51.25
1412-36
$ 47.95
1432-24
$ 74.25
1048
$ 18.95
1123 $ 44.95
1179
$
62.95
1412-38
$ 49.95
1432-30
$ 74.25
1049
$ 19.75
1124 $ 47.95
1192
$
35.75
1412-40
$ 52.50
1432-32
$ 74.25
1050
$ 12.75
1125 $ 51.75
1193
$
39.50
1413-40
$ 52.50
1051
$ 18.30
1126 $ 51.75
1194
$
39.50
1414-40
$ 64.50
1432-34
$ 74.25
1052
$ 25.15
1127 $ 51.75
1195
$
39.50
1420-42
$ 65.75
1432-38
$ 74.25
1053
$ 16.95
1128 $ 40.75
1196
$
39.50
1420-44
$ 67.75
1432-40
$ 74.25
1054
$ 15.75
1129 $ 40.75
1197
$
42.95
1421-23
$ 61.95
1432-44
$ 78.50
1055
$ 15.75
1130 $ 40.75
1198
$
42.95
1421-26
$ 69.95
1057
$ 23.60
1131 $ 36.95
1199
$
42.95
1421-32
$ 71.95
1433-30
$ 74.25
1058
$ 22.80
1132 $ 54.50
1222
$
30.95
1421-34
$ 72.50
1433-32
$ 74.25
$ 74.25
1059
$ 23.75
1133 $ 56.50
1225
$ 112.50
1421-36
$ 72.95
1433-34
1060
$ 17.85
1135 $ 41.95
1226
$
67.50
1421-37
$ 78.50
1433-40
$ 74.25
1061
$ 24.50
1136 $ 39.50
1228
$
83.95
1421-38
$ 78.95
1433-44
$ 78.50
1062
$ 23.25
1137 $ 37.95
1301
$ 159.00
1421-39
$ 78.95
1064
$ 26.25
1138 $ 38.95
1302
$ 199.00
1421-40
$ 79.50
1440-40
$ 88.75
1065
$ 25.25
1139 $ 31.95
1304
$ 129.00
1421-42
$ 84.95
1440-42
$ 90.95
1066
$ 23.95
1141 $ 39.50
1311
$ 159.00
1421-44
$ 85.50
1440-44
$ 90.95
1067
$ 27.50
1142 $ 26.50
1312
$ 199.00
1421-46
$ 93.50
1068
$ 22.75
1144 $ 32.50
1401-34
$
42.50
1421-48
$ 93.95
1521
$ 255.00
1069
$ 23.25
1145 $ 26.95
1401-36
$
44.50
1422-34
$ 84.50
1523
$ 240.00
1070
$ 23.95
1146 $ 32.50
1401-38
$
46.50
1422-36
$ 84.95
1525
$ 395.00
1072
$ 28.50
1147 $ 34.50
1401-40
$
48.50
1422-40
$ 89.50
1531
$ 255.00
1073
$ 26.95
1148 $ 32.50
1401-42
$
50.50
1422-42
$ 95.95
1535
$ 395.00
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 1
Karts and Parts - Price List
1550
$ 85.95
1700-236
$ 39.95
1849-090
$ 25.50
1565
$ 59.95
1700-246
$ 39.95
1849-095
$ 25.50
1888
$ 1.70
2021
$
8.75
2022
$
8.75
1569
$ 228.95
1721
$ 4.50
1849-099
$ 25.50
1901-K
$ 10.30
2023
$
8.75
1570
$ 213.50
1721-B
$ 3.75
1849-100
$ 25.50
1918
$ 10.50
2024
$
8.75
8.75
1571
$ 131.50
1727
$ 6.50
1919
$ 7.95
1572
$ 122.50
1728
$ 1.50
1849-105
$ 25.50
1920
$ 8.10
2025
$
1573
$ 125.50
1729
$ 2.85
1849-107
$ 25.50
1930
$ 16.95
2026
$
8.75
1574
$ 121.95
1731
$ 15.95
1849-110
$ 25.50
1931
$ 16.95
2027
$
8.75
1849-115
$ 25.50
1932
$ 16.95
1575
$ 32.50
1739
$ 6.75
1585
$ 39.50
1740
$ 6.95
1751
$ 2.75
1850
$ 9.95
1940
$ 16.95
1632
$ 32.95
1752
$ 3.75
1855
$ 8.95
1941
$ 16.95
2030
$
9.50
1633
$ 42.95
1753
$ 2.95
1857
$ 11.95
1942
$ 17.75
2031
$
9.50
1642
$ 58.95
1754
$ 3.50
1860
$ 5.25
2032
$
9.50
1643
$ 59.50
1952-K
$ 9.25
2033
$
9.50
1644
$ 59.50
1801
$ 32.95
1861-A
$ 37.95
1953-K
$ 9.75
2034
$
9.50
1645
$ 54.95
1805
$ 34.95
1861-B
$ 38.50
1649
$ 63.95
1806
$ 5.50
1651
$ 63.95
1809
$ 4.95
1862
$ 69.95
1863
$ 41.95
1956
$ 6.95
2037
$
8.25
1810
$ 5.50
1864
$ 44.95
1957
$ 7.50
2038
$
8.25
1958
$ 8.25
2039
$ 12.50
2000-AG
$ 15.50
2047
$ 25.50
1653
$ 58.50
1654
$ 58.50
2028
$
8.75
2029
$
9.50
1954
$ 6.25
2035
$
9.50
1955
$ 6.75
2036
$
9.50
1655
$ 53.95
1811
$ 5.50
1865
$ 9.95
1656
$ 49.95
1817
$ 2.95
1866
$ 15.95
1660
$ 63.95
1819
$ 5.95
1867-22
$ 29.95
2000-BG
$ 16.50
2048
$ 25.50
1820
$ 7.50
1867-25
$ 30.95
2000-CG
$ 16.95
2049
$ 25.50
1867-28
$ 30.95
1663
$ 56.60
1665
$ 32.95
1666
$ 32.95
1822
$ 43.95
1669
$ 186.50
1823
$ 36.95
1670
$ 171.95
1868-22
2000-DG
$ 17.95
2000-EG
$ 19.95
2050
$ 25.50
$ 25.95
2000-FG
$ 21.50
2051
$ 26.95
2000-GG
$ 23.95
2052
$ 26.95
1671
$ 101.95
1824-14
$ 34.95
1868-24
$ 25.95
1672
$ 92.95
1826-10
$ 28.95
1868-25
$ 26.95
1673
$ 96.95
1826-12
$ 29.50
1868-28
$ 26.95
2001
$ 25.50
1868-34
$ 28.95
2002
$ 25.50
1674
$ 92.50
1826-14
$ 29.95
1675
$ 32.50
1829
$ 8.95
1676
$ 32.50
1830
$ 11.95
1677
$ 177.95
1872
$ 18.25
1872-A
$ 17.25
2053
$ 26.95
2054
$ 26.95
2003
$ 25.50
2055
$ 29.95
2004
$ 25.50
2056
$ 29.95
2057
$ 29.95
1678
$ 164.95
1841-11
$ 11.95
1873
$ 12.95
2005
$ 26.95
2058
$ 29.95
1679
$ 99.50
1841-13
$ 12.95
1874
$ 10.95
2006
$ 26.95
2059
$ 32.50
1680
$ 90.75
1842-11
$ 17.50
2007
$ 26.95
1681
$ 93.25
1842-15
$ 17.95
1875
$ 2.25
2008
$ 26.95
2060
$ 32.50
1682
$ 87.50
1842-24
$ 18.95
1877
$ 7.75
2009
$ 29.95
2061
$ 32.50
1877-A
$ 6.75
2062
$ 32.50
1843-11
$ 10.25
1878
$ 25.95
2010
$ 29.95
1879
$ 51.95
1691
$ 134.95
1693
$ 149.95
1700-15
$ 22.75
1843-15
$ 10.75
1700-19
$ 22.75
1843-24
$ 11.95
1700-128
$ 45.95
1844-11
$ 16.50
1700-136
$ 64.95
1844-13
$ 16.95
1700-230
$ 39.95
1883
1887
$ 3.50
2011
$ 29.95
2084
$ 14.75
2012
$ 29.95
2085
$ 14.75
2013
$ 29.95
2086
$ 14.75
2014
$ 32.95
2087
$ 14.75
2088
$ 15.95
$ 1.40
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 2
Karts and Parts - Price List
2089
$ 15.95
2140
$ 5.95
2196
$
6.95
2248-ID
$ 35.95
2296
$ 39.50
2141
$ 6.50
2197
$
6.95
2249-OD $ 37.95
2297
$ 28.95
2251
$ 12.95
2298
$ 35.95
2200
$ 19.50
2251-B
$ 12.25
2299
$ 36.50
2201
$ 19.50
2252
$ 20.95
2090
$ 15.95
2142
$ 6.95
2091
$ 15.95
2143
$ 7.25
2092
$ 18.50
2093
$ 18.50
2144
$ 7.50
2202
$ 12.95
2253
$ 10.50
2300
$
2.35
2094
$ 18.50
2145
$ 7.95
2203
$ 12.95
2254
$
1.20
2301
$
2.75
2146
$ 8.75
2204
$ 17.25
2255
$ 13.95
2302
$
1.95
2147
$ 9.50
2255-B
$ 13.25
2303
$
2.50
2095
$ 18.50
2096
$ 20.95
2097
$ 20.95
2151
2098
$ 20.95
2099
$ 20.95
2101-K
$ 10.30
2102
$ 7.35
2103
$ 7.85
2161
2104
$ 8.25
2105
$ 8.50
2205
$ 17.25
2259
$
4.95
2303-6MM
$
2.35
$ 11.95
2206
$ 10.95
2259-A
$
7.50
2304
$
4.40
2152
$ 11.95
2207
$ 10.95
2260
$ 16.95
2305
$
2.10
2155
$ 11.95
2208
$ 36.95
2263
$
1.35
2305-6MM
$
2.10
2157
$ 14.50
2209
$
2264
$
0.75
2306
$
2.50
2158
$ 14.50
2265-ID
$ 25.75
2307
$
2.10
4.75
2211-ID
$ 13.50
2265-OD $ 25.75
2308
$
3.65
$ 14.50
2211-OD
$ 13.50
2266-ID
$ 23.75
2309
$
0.20
2163
$ 7.25
2213-ID
$ 10.95
2266-OD $ 23.75
2314
$ 53.95
2213-OD
$ 12.95
2267-ID
$ 37.95
2314-50
$
2164-60
$ 23.95
2217-ID
$ 23.95
2267-OD $ 42.75
2314-92
$ 10.95
2314-116
$ 13.75
2315
$ 65.95
$ 39.95
7.50
2106
$ 8.85
2164-66
$ 25.50
2217-OD
$ 25.95
2268-ID
2107
$ 9.50
2164-72
$ 26.25
2218-ID
$ 26.95
2268-OD $ 41.95
2108
$ 11.65
2218-OD
$ 28.95
2269
$ 37.95
2315-54
$
2110
$ 9.95
2165-60
$ 23.95
2220
$ 53.95
2270A
$ 36.95
2315-78
$ 12.25
2111
$ 10.40
2165-72
$ 26.25
2221
$ 53.95
2270S
$ 36.95
2318
$ 48.95
2222
$ 53.95
2271A
$ 36.95
2318-50
7.50
$
6.95
2112
$ 11.25
2166-40
$ 28.95
2223
$ 53.95
2271S
$ 36.95
2318-58
$
7.75
2113
$ 11.50
2166-54
$ 35.95
2224
$ 53.95
2272A
$ 36.95
2318-78
$
8.95
2114
$ 12.75
2166-60
$ 39.95
2225
$ 53.95
2272S
$ 36.95
2318-81
$
9.95
2115
$ 3.45
2167-54
$ 29.95
2228
$ 124.95
2273
$
9.95
2321
$
3.25
2116
$ 3.65
2168-54
$ 29.95
2229
$ 124.95
2274
$ 16.50
2322
$ 74.95
2230
$ 135.95
2275
$ 10.95
2322-60
$ 10.35
2123-K
$ 9.50
2172
$ 8.50
2231
$ 19.95
2276
$ 20.95
2322-66
$ 10.95
2124-K
$ 9.75
2173
$ 8.95
2232
$ 19.95
2278
$
4.95
2323
$
3.65
2125-K
$ 10.25
2174
$ 9.50
2233
$ 13.50
2279
$
4.65
2324
$
1.95
2126
$ 5.95
2175
$ 9.95
2234
$ 13.50
2280
$ 10.95
2325
$
3.95
2176
$ 10.50
2235
$ 17.75
2281
$
8.95
2326
$
4.95
2127
$ 6.95
2177
$ 10.95
2236
$ 17.75
2282
$ 41.95
2327
$
2.50
2127-K
$ 10.50
2237
$ 11.95
2283
$ 19.95
2328
$
2.95
2128
$ 6.65
2180
$ 9.50
2238
$ 11.95
2286
$ 23.95
2329
$
3.50
2129
$ 7.25
2181
$ 10.50
2239
$ 11.95
2288
$ 15.95
2330
$
8.50
2182-K
$ 10.50
2245-ID
$ 25.75
2289
$ 36.95
2331
$
2.50
2130
$ 7.50
2184
$ 0.70
2245-OD
$ 25.75
2290
$ 73.95
2334
$
2.15
2131
$ 7.95
2186
$ 7.95
2246-ID
$ 25.75
2291
$ 119.95
2340
$
0.48
2132
$ 8.75
2187
$ 7.95
2246-OD
$ 25.75
2292
$ 39.75
2341
$
0.35
2133
$ 9.50
2247-ID
$ 32.50
2293
$ 49.95
2342
$
0.65
2138-K
$ 9.75
2189-K
$ 11.75
2247-OD
$ 36.50
2294
$ 59.95
2343
$
0.65
2139-K
$ 10.25
2190-K
$ 11.95
2295
$ 38.95
2344
$
0.42
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 3
Karts and Parts - Price List
2347
$ 1.85
2530
$ 39.95
2611
$ 30.50
2348
$ 1.95
2532
$ 13.75
2612
$ 30.50
2349
$ 2.00
2350
$ 13.95
2669
$ 32.50
2728
$ 24.25
2729
$ 24.25
2533
$
6.50
2613
$ 30.50
2670
$ 32.50
2730
$ 24.25
2535
$
0.25
2614
$ 30.50
2671
$ 32.50
2731
$ 24.25
2537
$
3.50
2672
$ 32.50
2352
$ 29.95
2538
$ 15.95
2615
$ 30.50
2673
$ 32.50
2732
$ 24.25
2359
$ 18.95
2539
$
0.55
2616
$ 30.50
2674
$ 32.50
2733
$ 24.25
2541
$
7.95
2617
$ 30.50
2734
$ 24.25
2360
$ 0.65
2542
$ 12.50
2618
$ 30.50
2675
$ 32.50
2735
$ 24.25
2619
$ 31.95
2676
$ 32.50
2736
$ 24.25
2677
$ 32.50
2361
$ 0.70
2547
$ 98.95
2362
$ 1.00
2548
$ 103.95
2363
$ 0.75
2549
$ 39.00
2620
$ 31.95
2678
$ 34.95
2823
$ 22.50
2550
$ 62.95
2621
$ 31.95
2679
$ 34.95
2824
$ 22.50
2825
$ 22.50
2680
$ 34.95
2826
$ 22.50
2881
$ 34.95
2827
$ 22.50
2682
$ 34.95
2364
$ 0.90
2551
$ 104.95
2622
$ 31.95
2365
$ 0.80
2552
$ 110.95
2623
$ 31.95
2624
$ 31.95
2366
$ 0.70
2555
$ 19.95
2367
$ 0.95
2555-A
$ 18.50
2369
$ 0.90
2556
$ 17.50
2625
$ 31.95
2683
$ 34.95
2828
$ 24.25
2370
$ 1.20
2557
$
2626
$ 31.95
2684
$ 34.95
2829
$ 24.25
1.30
2371
$ 1.50
2558
$ 19.95
2627
$ 31.95
2830
$ 24.25
2372
$ 1.45
2558-A
$ 18.50
2628
$ 34.95
2699-85
$ 34.95
2831
$ 24.25
2373
$ 1.60
2629
$ 34.95
2699-86
$ 34.95
2832
$ 24.25
2699-87
$ 34.95
2699-88
$ 34.95
2833
$ 25.25
2374
$ 0.55
2559
$ 18.25
2561
$ 14.95
2562
$ 16.95
2630
$ 34.95
2375
$ 0.55
2562-A
$ 15.50
2631
$ 34.95
2834
$ 25.25
2377
$ 0.75
2563
$
2.50
2632
$ 34.95
2699-89
$ 38.95
2835
$ 25.25
2379
$ 0.70
$ 25.25
2380
$ 0.80
2564
$
1.10
2633
$ 34.95
2699-90
$ 38.95
2836
2565
$ 14.95
2635
$ 34.95
2699-91
$ 38.95
3502
$ 149.95
2566
$ 16.95
2699-92
$ 38.95
3505
$ 19.95
2699-93
$ 38.95
2381
$ 0.65
2566-A
$ 15.50
2653
$ 28.95
2383
$ 0.50
2600-AG
$ 19.50
2654
$ 28.95
2655
$ 28.95
2386
$ 1.10
2600-BG $ 20.75
2387
$ 1.15
2600-CG $ 21.50
3545
$ 129.95
3546
$ 34.50
2699-94
$ 38.95
3548
$ 88.95
2699-95
$ 38.95
3800
$ 95.95
2389
$ 1.20
2600-DG $ 22.50
2656
$ 28.95
2699-96
$ 38.95
3801
$ 48.50
2390
$ 0.60
2600-EG
$ 24.95
2657
$ 28.95
2699-97
$ 38.95
3802
$ 10.85
2391
$ 0.45
2600-FG
$ 26.50
2658
$ 28.95
2699-98
$ 41.95
3803
$
3.95
2392
$ 0.65
2600-GG $ 27.95
2659
$ 28.95
2699-99
$ 41.95
3804
$
1.20
2394
$ 0.90
3806
$
2.70
3.95
2602
$ 28.50
2660
$ 28.95
2699-100
$ 41.95
3807
$
2512
$ 18.50
2603
$ 28.50
2661
$ 30.95
2699-102
$ 45.75
3812
$
1.35
2513
$ 18.50
2604
$ 28.50
2662
$ 30.95
2699-104
$ 45.75
3813
$
1.75
2605
$ 28.50
2699-114
$ 49.50
2514
$ 12.25
2515
$ 12.25
2663
$ 30.95
2664
$ 30.95
2606
$ 28.50
2516
$ 20.75
2607
$ 28.50
2665
$ 30.95
2724
2517
$ 20.75
$ 22.50
2608
$ 28.50
2666
$ 30.95
2725
$ 22.50
2518
$ 13.95
2609
$ 30.50
2667
$ 30.95
2726
$ 22.50
2519
$ 13.95
2610
$ 30.50
2668
$ 30.95
2727
$ 22.50
2723
3814
$
2.15
3815
$
2.60
3816
$
0.85
3817
$
0.85
3818
$
0.95
3819
$
1.30
$ 22.50
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 4
Karts and Parts - Price List
3820
$ 0.60
4056
$ 3.95
7022
$ 54.95
7065
$ 34.50
3821
$ 2.25
4056-10
$ 4.05
7023
$ 42.95
7066
$ 51.95
3822
$ 3.60
4057
$ 1.10
7024-2
$ 40.95
3823
$ 2.75
4058
$ 1.95
7071-2
$ 9.75
4097
$ 16.25
7025
$ 98.95
7072
4001
$ 2.45
4099
$ 4.65
7026-2
$ 56.95
7073
4001-10
$ 2.50
7027
$ 78.95
4002
$ 0.60
4147
$ 3.95
7028
$ 61.50
4003
$ 1.30
4147-10
4006
$ 3.95
4006-10
7140
$ 13.50
7141
$ 11.95
$ 15.25
7142
$ 18.95
$ 9.75
7143
$
5.75
7074
$ 11.95
7144
$
7.25
7075
$ 17.50
7146
$
8.95
$ 4.15
7077
$ 14.95
7147
$
8.25
4148
$ 0.85
7078
$ 10.95
7148
$
9.75
$ 4.05
4149
$ 1.70
4007
$ 0.65
4313
$ 8.95
4008
$ 2.05
4316
4008-10
$ 2.15
4318
4009
$ 0.40
4010
$ 0.90
7030-2
$ 50.95
7087
$ 35.95
7149
$ 20.75
7031
$ 29.95
7088
$ 44.95
7150
$
5.95
7032
$ 16.25
7090
$ 17.50
7151
$
6.95
$ 4.95
7033
$ 18.75
7091
$ 13.75
7152
$
3.50
$ 8.10
7034
$ 19.95
7092-2
$ 53.25
7164
$ 17.25
7093
$ 32.95
7168
$ 19.75
4390
$ 11.95
7035
$ 12.25
7169
$ 26.50
4391
$ 16.95
7036
$ 16.25
7094
$ 35.75
4014
$ 2.25
7037
$ 18.75
7095
$ 52.50
7900
$
5.95
4014-10
$ 2.35
4392
$ 12.95
7038
$ 15.75
7096
$ 58.50
7908
$
8.75
4015
$ 0.46
4397
$ 32.95
7039
$ 19.95
7097
$ 14.95
7909
$
8.75
4016
$ 0.85
4398-10
$ 9.95
7040
$ 31.75
7116
$ 14.75
7910
$
8.75
4023
$ 2.75
4801
$ 2.95
7041
$ 23.25
7118
$ 18.25
7911
$
8.25
4023-10
$ 2.90
4801-10
$ 3.40
7042
$ 23.50
7119
$ 14.95
7912
$
8.25
4024
$ 0.45
4802
$ 0.75
7043
$ 27.25
7913
$
9.50
4025
$ 0.90
4899
$ 25.95
7044
$ 32.50
7120
$ 15.50
7002
$ 53.95
7045
$ 19.95
7121
$ 11.95
7914
$
9.50
4035
$ 2.15
7003-2
$ 11.75
7046
$ 20.50
7122
$ 7.95
7915
$
9.50
4035-10
$ 2.25
7004-2
$ 19.50
7123
$ 7.50
7916
$ 16.25
4036
$ 0.60
7005
$ 17.50
7124
$ 9.50
7921
$ 11.50
7046-8
$ 29.50
7047
$ 14.95
4037
$ 1.00
7007
$ 74.95
7048
$ 35.95
7125
$ 8.50
8001
$ 17.50
4038
$ 2.50
7008-2
$ 17.25
7049
$ 21.95
7126
$ 10.50
8003
$ 17.95
4038-10
$ 2.55
7009
$ 33.75
7127
$ 10.50
8009
$ 29.95
4039
$ 0.55
7010-2
$ 26.95
4040
$ 0.60
7011-2
$ 14.95
4041
$ 3.45
7012
4041-10
$ 3.50
7013
4042
$ 0.90
7050
$ 24.50
7128
$ 7.50
8011
$ 22.95
7051
$ 36.15
7129
$ 5.25
8014
$ 21.95
7052
$ 29.95
$ 14.95
7053
$ 18.25
7130
$ 6.25
8020
$ 24.75
$ 34.95
7054
$ 26.95
7131
$ 7.75
8021
$ 24.75
7014
$ 14.75
7055
$ 74.95
7132
$ 6.75
8023
$ 24.95
7015
$ 43.50
7133
$ 7.85
8024
$ 24.95
7134
$ 8.50
8052
$ 14.95
8053
$ 14.95
8054
$ 19.50
4043
$ 1.31
7057-2
$ 16.95
4044
$ 4.45
7016-2
$ 30.25
7058
$ 25.50
4044-10
$ 4.50
7017-2
$ 35.50
7059
$ 19.95
7135
$ 7.75
4045
$ 1.45
7018
$ 26.50
7060
$ 26.95
7136
$ 7.75
4046
$ 2.10
7019
$ 92.50
7061
$ 39.95
7137
$ 10.75
8061
$ 11.50
7020
$ 28.95
7062
$ 46.95
7138
$ 20.95
8062
$
4.95
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 5
Karts and Parts - Price List
8100
$ 22.50
8175-10
$ 6.50
8219
$ 2.65
8256
$ 3.20
8330
$
1.35
8101
$ 23.75
8175-12
$ 6.95
8220
$ 3.65
8257
$ 1.65
8332
$
3.80
8110
$ 7.25
8175-14
$ 7.50
8220-L
$ 3.65
8258
$ 4.20
8333
$
0.85
8116
$ 1.20
8175-16
$ 7.95
8260
$ 12.75
8118
$ 6.30
8176
$ 0.70
8221
$ 7.35
8261
$ 24.95
8334
$
6.95
8120-8
$ 6.95
8178
$ 9.25
8221-L
$ 7.35
8262
$ 22.95
8335
$
0.25
8120-10
$ 7.95
8178-2
$ 9.25
8222
$ 2.70
8263
$ 19.95
8336
$
5.75
8121-7
$ 6.50
8223
$ 2.10
8264
$ 10.50
8337
$
4.10
8121-9
$ 7.50
8224
$ 2.15
8265
$ 10.95
8338
$
1.45
8122-14
$ 15.50
8181
$ 3.95
8225
$ 1.80
8266
$ 24.95
8339
$
1.40
8122-16
$ 16.95
8182
$ 0.40
8268
$ 3.95
8122-18
$ 18.50
8183-10
$ 8.75
8227-090
$ 10.00
8271
$ 0.65
8340
$
0.25
8127
$ 3.25
8183-14
$ 10.95
8227-095
$ 10.00
8272
$ 11.75
8341
$
0.22
8128
$ 2.40
8183-19
$ 12.95
8227-099
$ 10.00
8273
$ 6.25
8342
$
2.25
8129
$ 1.20
8227-100
$ 10.00
8275-11
$ 2.95
8343
$
0.25
8130
$ 3.95
8184
$ 10.50
8275-15
$ 3.50
8134
$ 5.50
8185
$ 15.95
8227-105
$ 10.00
8275-24
$ 4.95
8344
$
0.38
8186
$ 14.95
8227-107
$ 10.00
8276-11
$ 4.50
8345
$
1.55
8187
$ 24.75
8227-110
$ 10.00
8276-13
$ 4.75
8346
$
0.40
8227-115
$ 10.00
8282
$ 1.35
8347
$
0.10
8301
$ 0.32
8348
$
0.35
8135
$ 1.40
8136
$ 4.75
8190
$ 9.45
8137-6
$ 8.95
8191
$ 11.50
8228
$ 6.95
8302
$ 0.05
8137-22
$ 13.50
8192
$ 63.50
8229
$ 4.95
8303
$ 0.14
8351
$
0.40
8137-24
$ 13.50
8193
$ 7.95
8230
$ 3.00
8304
$ 0.30
8352
$
0.32
8137-25
$ 13.95
8194
$ 7.75
8235
$ 5.75
8305
$ 0.25
8353
$
0.03
8137-28
$ 13.95
8196
$ 49.95
8306
$ 0.10
8354
$
3.80
8137-34
$ 15.50
8201
8138
$ 14.50
8202
8139
$ 19.95
8140-22
8236
$ 4.45
8307
$ 0.65
$ 1.95
8237
$ 8.50
8308
$ 0.27
8355
$
0.20
$ 5.95
8238
$ 15.00
8309
$ 0.70
8356
$
2.75
8203
$ 3.15
8239
$ 5.95
8310
$ 1.90
8357
$
3.75
$ 18.95
8204
$ 1.95
8242
$ 2.40
8311
$ 3.05
8358
$
5.95
8140-25
$ 19.95
8205
$ 2.15
8243
$ 3.75
8312
$ 6.90
8359
$
2.75
8140-28
$ 19.95
8243-L
$ 3.95
8313
$ 5.25
8360
$
3.50
8141
$ 46.95
8206
$ 1.95
8244
$ 7.95
8314
$ 3.80
8361
$
2.75
8142
$ 46.95
8207
$ 4.40
8244-L
$ 7.95
8316
$ 0.22
8362
$
2.95
8143
$ 1.50
8208
$ 11.95
8317
$ 0.10
8363
$
2.30
8144
$ 1.85
8209
$ 13.75
8245
$ 11.95
8318
$ 2.75
8364
$
2.10
8146
$ 28.95
8210
$ 3.50
8246
$ 7.95
8319
$ 2.25
8366
$
1.65
8147
$ 13.95
8247
$ 7.95
8320
$ 2.85
8367
$
2.25
8148
$ 8.95
8211
$ 8.95
8248
$ 7.35
8321
$ 2.15
8368
$
1.95
8149
$ 28.95
8212
$ 1.40
8249
$ 7.35
8322
$ 0.10
8369
$
4.25
8155
$ 25.95
8213
$ 1.50
8323
$ 2.60
8370
$
0.10
8157
$ 0.75
8214
$ 30.95
0.09
8162
$ 0.85
8171
$ 3.95
8215
8172
$ 1.50
8173
$ 1.50
8175-4
$ 4.50
8250-L
$ 6.95
8324
$ 2.00
8371
$
8250-R
$ 6.95
8325
$ 1.65
8372
$
0.10
$ 0.60
8251-L
$ 10.50
8373
$
0.08
8216
$ 6.25
8251-R
$ 10.50
8327
$ 4.50
8374
$
0.18
8217
$ 1.80
8253
$ 2.40
8328
$ 0.35
8375
$
0.16
8218
$ 5.95
8254
$ 2.95
8329
$ 0.32
8376
$
0.20
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 6
Karts and Parts - Price List
8377
$ 0.16
8446
$ 1.22
8489
$ 0.18
8534
$ 0.11
10122
$ 43.95
8378
$ 0.26
8447
$ 1.80
8490
$ 0.25
8535
$ 0.50
10123
$ 43.95
8448
$ 0.28
8491
$ 0.20
8536
$ 0.42
10124
$ 52.95
8380
$ 2.35
8449
$ 0.28
8537
$ 0.45
10125
$ 55.95
8382
$ 0.25
8451
$ 2.35
8492
$ 0.30
8538
$ 4.00
8384
$ 0.45
8453
$ 0.45
8493
$ 0.28
8539
$ 0.11
10131
$ 44.25
8386
$ 0.35
8454
$ 0.32
8494
$ 0.12
8540
$ 0.25
10132
$ 52.95
8387
$ 0.23
8455
$ 1.00
8541
$ 1.50
10133
$ 52.95
8456
$ 1.75
8495
$ 0.16
8542
$ 0.30
10134
$ 61.95
8496
$ 0.12
8551
$ 4.75
10135
$ 64.95
8497
$ 0.06
8551-PK
$ 5.85
8552
$ 6.50
10151
$ 49.95
8498
$ 0.36
8552-PK
$ 7.50
10152
$ 59.95
8402
$ 2.20
8403
$ 1.80
8457
$ 1.72
8404
$ 1.80
8458
$ 2.25
8405
$ 0.16
8459
$ 0.45
8499
$ 0.70
8553
$ 6.75
10153
$ 59.95
8406
$ 0.25
8460
$ 0.14
8500
$ 0.05
8553-PK
$ 7.95
10154
$ 65.50
8407
$ 0.27
8461
$ 1.45
8501
$ 0.08
8554
$ 1.40
10155
$ 68.95
8408
$ 2.25
8462
$ 0.65
8502
$ 0.05
8555
$ 1.35
8410
$ 0.09
8463
$ 0.08
8503
$ 0.15
8557
$ 5.75
8412
$ 0.76
8504
$ 0.25
8557-PK
$ 6.75
8413
$ 0.09
8464
$ 0.24
8505
$ 0.26
8558
$ 6.50
8414
$ 1.05
8465
$ 0.45
8507
$ 0.10
8558-PK
$ 7.50
8415
$ 0.13
8466
$ 0.45
8508
$ 0.04
8416
$ 0.14
8467
$ 0.45
8509
$ 0.47
8559
$ 6.50
8418
$ 0.04
8510
$ 0.10
8559-PK
$ 7.50
8419
$ 0.03
8468
$ 0.65
8511
$ 0.96
8421
$ 0.18
8469
$ 0.54
8512
$ 0.06
8560
$ 1.45
8422
$ 0.14
8470
$ 0.16
8513
$ 0.50
8562
$ 0.75
8423
$ 0.86
8470-F
$ 0.20
8514
$ 0.12
8565
$ 1.90
8515
$ 0.25
8425
$ 0.45
8471
$ 3.60
8516
$ 0.65
8568
$ 5.35
8428
$ 1.50
8472
$ 2.20
8517
$ 0.70
8569
$ 16.25
8431
$ 0.18
8473
$ 1.75
8518
$ 2.20
8432
$ 0.10
8474
$ 0.14
8519
$ 0.07
8433
$ 0.15
8521
$ 0.75
8434
$ 0.31
8475
$ 0.14
8522
$ 0.20
8578
$ 8.75
8435
$ 0.43
8476
$ 0.12
8523
$ 0.05
8578-PK
$ 9.75
8478
$ 0.12
8524
$ 0.40
8579
$ 9.50
8479
$ 0.68
8525
$ 0.50
8579-PK
$ 10.50
8580
$ 12.95
8437
$ 0.22
8438
$ 0.17
8480
$ 0.10
8526
$ 0.13
8439
$ 0.82
8481
$ 1.35
8527
$ 0.30
8482
$ 1.50
8528
$ 0.35
10101
$ 26.50
8440
$ 0.10
8483
$ 0.12
8529
$ 0.45
10102
$ 36.50
8441
$ 0.17
8484
$ 0.12
10103
$ 36.50
8442
$ 0.40
8444
$ 2.10
8445
$ 1.40
8530
$ 0.70
10104
$ 47.75
10105
$ 50.95
10121
$ 31.95
8485
$ 1.30
8531
$ 0.05
8486
$ 1.15
8532
$ 0.50
8487
$ 0.22
8533
$ 0.12
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 7
Karts and Parts - Price List
NOTE: Finished Sprockets are fully machined to a specified bore and mounting bolt hole pattern.
Blank Sprockets have simply a stock 1" bore, ready for your final machining. The tables below have
both finished and blank sprocket numbers by chain. When ordering please follow catalog instructions.
#35 Chain
Blanks
#40 (#425) Chain
Blanks
Finished
Finished
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
T5201
19/36
$ 15.95
T5313
19/36
$ 20.75
T5206
17/27
$ 23.25
T5315
17/27
$ 27.95
37/44
$ 18.95
37/44
$ 24.75
28/40
$ 25.75
28/40
$ 30.25
45/55
$ 22.50
45/55
$ 26.75
41/48
$ 32.50
41/48
$ 37.25
56/64
$ 25.75
56/64
$ 29.75
49/58
$ 40.95
49/58
$ 45.75
65/73
$ 30.75
65/73
$ 34.95
59/67
$ 50.50
59/67
$ 55.50
74/78
$ 34.25
74/78
$ 38.50
68/72
$ 54.75
68/72
$ 59.25
79/82
$ 37.75
79/81
$ 43.50
73/80
$ 60.95
73/80
$ 66.95
83/94
$ 41.95
82/94
$ 46.75
#41 (#420) Chain
Blanks
#42 (#415) Chain
Finished
Blanks
Finished
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
T5203
17/27
$ 23.25
T5314
17/27
$ 27.95
T5204
17/27
$ 20.95
T5321
17/27
$ 25.75
28/40
$ 25.75
28/40
$ 30.25
28/40
$ 24.75
28/40
$ 29.50
41/48
$ 32.50
41/48
$ 37.25
41/48
$ 29.95
41/48
$ 34.95
49/58
$ 40.95
49/58
$ 45.75
49/58
$ 39.50
49/58
$ 44.50
59/67
$ 50.95
59/67
$ 55.50
59/67
$ 42.95
59/67
$ 47.50
68/72
$ 54.75
68/72
$ 59.25
68/72
$ 47.95
68/72
$ 52.95
73/80
$ 60.95
73/80
$ 66.95
#428 Chain
Blanks
#520 Chain
Finished
Blanks
Finished
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
T5207
17/27
$ 23.25
T5320
17/27
$ 27.95
T5208
18/26
$ 28.95
T5316
18/26
$ 33.95
28/40
$ 25.75
28/40
$ 30.25
27/37
$ 31.50
27/37
$ 36.95
41/48
$ 32.50
41/48
$ 37.25
38/45
$ 39.75
38/45
$ 44.50
49/58
$ 40.95
49/58
$ 45.75
46/52
$ 51.50
46/52
$ 55.50
59/67
$ 50.50
59/67
$ 55.50
53/57
$ 57.95
53/57
$ 62.95
68/72
$ 54.75
68/72
$ 59.25
58/63
$ 74.25
58/63
$ 78.95
73/79
$ 60.95
73/79
$ 66.95
#50 (#530) Chain
Blanks
#630 Chain
Finished
Blanks
Finished
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
Part#
Range
Price
T5210
27/37
$ 28.95
T5317
27/37
$ 33.95
T5211
28/37
$ 38.95
T5318
28/37
$ 43.50
38/45
$ 37.95
38/45
$ 42.50
38/43
$ 52.95
38/43
$ 56.50
46/52
$ 50.95
46/52
$ 55.25
44/47
$ 57.95
44/47
$ 62.50
53/57
$ 56.75
53/57
$ 61.50
48/52
$ 75.95
48/52
$ 80.95
58/63
$ 74.95
58/63
$ 79.50
7051 Hunters Creek Rd. South Wales, New York 14139
Phone: (716)655-2883 Fax: (716)655-2883
Web Site: www.smartkartparts.com E-Mail: [email protected]
Page 8

Similar documents

2010 /2011 Parts Catalog

2010 /2011 Parts Catalog convenience, each section is also color coded as follows: Accessories / Tools- P1-3 Rotax and CRG Parts-P4-16 Comer Parts-P3-4 Safety Equipment-P16-26 Engines/ Carbs-P4 Tires /Wheels-P26 Karts / St...

More information