GEM Plus - GE Industrial Solutions

Transcription

REGIONAL OFFICES
BRANCH OFFICES
NORTH
New Delhi
Chandigarh
Jaipur
Lucknow
GE India Industrial Pvt. Ltd.
71/1, Shivaji Marg
New Delhi-110015
Ph: (011) 45052277/8
Fax: (011) 25928088
SCO No. 72 & 73, First Floor
Sector 8/C, Madhya Marg
Chandigarh-160008
Ph: (0172) 3982908-10
Fax: (0172) 3982905
448, 4th Floor, Ganapati Plaza
M.I. Road, Jaipur-302001
Ph: (0141) 5112802
Fax: (0141) 2389012
101, Ace Business Center
19, Vidhan Sabha Marg
Lucknow-226001
Ph: (0522) 3203808, 3012444/666
Fax: (0522) 4045909
Bangalore
Chennai
Coimbatore
Cochin
Hyderabad
The Millenia, Level-6, Tower B
1 & 2, Murphy Road, Ulsoor
Bangalore-560008
Ph: (080) 41434000
Fax: (080) 41434199
Temple Tower, 6th Floor
476, (New No. 672) Anna Salai
Nandanam
Chennai-600035
Ph: (044) 45070470-84
Fax: (044) 45070474
No.36/6 & 7, 1st Floor
Ashirwad Building
D.B.Road, R.S. Puram
Coimbatore-641002
Ph: (0422) 4393520 / 4393529
Mayur Business Center & Motel
Chittur Road, Pullepadi Junction
Cochin-682035
Ph: (0484) 2364139
Fax: (0484) 4031400
5-2-45, Hyderbasti, RP Road
Near Gujarati High School
Secunderabad-500003
Ph: (040) 27543162, 66311264
Fax: (040) 66339272
Mumbai
Ahmedabad
Pune
361/362, Solitaire Corporate Park
M. Vasanji Road, Chakala
Andheri (E), Mumbai-400093
Ph: (022) 40101610
Fax: (022) 40101611
405-406, Kirtiman Complex
Kinariwala House, Behind Citibank
Off C.G. Road, Ahmedabad-380006
Ph: (079) 65427385/55427389
Fax: (079) 26460637
GE Money Financial Services Limited
Shop No. 405-410, 4th Floor
City Point, Dhole Patil Road
Pune-411001
Mob: +91 9850867507
SOUTH
WEST
GEM Plus
Custom-Built Low Voltage
Switchboard System
EAST
Kolkata
Horizon Building, 4th Floor
57, Chowringhee Road
Kolkata-700071
Ph: (033) 40034056
Fax: (033) 40034071
We are committed to continuous development and improvement of our products and the specifications are
subject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
g and General Electric are registered trade marks of General Electric Co. USA
©
Works:
Plot No. 42/1 & 45/14
Electronic City - Phase II
Bangalore-560100
Ph: (080) 41113000
Fax: (080) 28528469/552
HO:
Bangalore-560008
Ph: (080) 41434000
Fax: (080) 41434199
Email: [email protected]
Toll Free No:
18001024343
Customer Care:
[email protected]
MCC’S - PCC’S
Draw-out & fixed.
GEM Plus
Custom-Built Low Voltage Switchboard System
When we designed the new modular GEM Plus system, our customers were involved right from the
beginning. Based on customer needs assessed from the derived target market segment, the new
GEM Plus provides significantly increased flexibility, reliability, security, expandability, aesthetics,
and value for money.
GEM Plus type tested factory built assemblies are designed and manufactured in accordance with
the highest quality of the national/international standard applicable to low voltage equipment.
The comprehensive range of GEM Plus system applications varies from withdrawable and fixed
power control centers with air circuit breakers, motor control centers in fully draw-out, semi drawout
and fixed version for motor starter application, distribution panels in draw-out and fixed version.
The equipment can be executed with a three or four phase busbar with maximum safety level for
the operator.
GE, the General Electric is a world-renowned innovator and
supplier of systems and components for low voltage
switchgear, power distribution & industrial automation.
GE draws on this wealth of background Knowledge in
designing and manufacturing of low voltage switchgear for
its global and local customers.
GE Energy - Industrial Solutions, comprehensive portfolio of LV & MV Business solutions includes:
Components
Equipments
Motors
Salient Features of GEM Plus:
•
Using a relatively few standard components it is possible
to construct a custom build switchboard
•
The versatility of the modular system makes it easy &
quick assembly, extension and site modifications
•
Standardized drawout modules are fully interchangeable
•
Self locking of drawout modules after insertion
•
Plugin terminals for semi drawout and sliding terminals
for fully drawout control contacts
•
Non-hygroscopic fire retardant barriers and DMC/SMC
moulded insulators for increased safety
•
Vertical busbars designed for 4 pole plug in system to
provide drawout neutral isolation
•
Interleaving busbar system is adopted for higher rated
switchboards
•
Spacious horizontal busbar chamber for better heat
dissipation
MCC’S - PCC’S
Draw-out & fixed.
GEM Plus
Custom-Built Low Voltage Switchboard System
When we designed the new modular GEM Plus system, our customers were involved right from the
beginning. Based on customer needs assessed from the derived target market segment, the new
GEM Plus provides significantly increased flexibility, reliability, security, expandability, aesthetics,
and value for money.
GEM Plus type tested factory built assemblies are designed and manufactured in accordance with
the highest quality of the national/international standard applicable to low voltage equipment.
The comprehensive range of GEM Plus system applications varies from withdrawable and fixed
power control centers with air circuit breakers, motor control centers in fully draw-out, semi drawout
and fixed version for motor starter application, distribution panels in draw-out and fixed version.
The equipment can be executed with a three or four phase busbar with maximum safety level for
the operator.
GE, the General Electric is a world-renowned innovator and
supplier of systems and components for low voltage
switchgear, power distribution & industrial automation.
GE draws on this wealth of background Knowledge in
designing and manufacturing of low voltage switchgear for
its global and local customers.
GE Energy - Industrial Solutions, comprehensive portfolio of LV & MV Business solutions includes:
Components
Equipments
Motors
Salient Features of GEM Plus:
•
Using a relatively few standard components it is possible
to construct a custom build switchboard
•
The versatility of the modular system makes it easy &
quick assembly, extension and site modifications
•
Standardized drawout modules are fully interchangeable
•
Self locking of drawout modules after insertion
•
Plugin terminals for semi drawout and sliding terminals
for fully drawout control contacts
•
Non-hygroscopic fire retardant barriers and DMC/SMC
moulded insulators for increased safety
•
Vertical busbars designed for 4 pole plug in system to
provide drawout neutral isolation
•
Interleaving busbar system is adopted for higher rated
switchboards
•
Spacious horizontal busbar chamber for better heat
dissipation
MCC’S - PCC’S
Draw-out & fixed.
Applications
Electrical Data
Buildings, Machinery And Processes
Rated operating voltage
Ue
415V AC
Rated frequency
50 / 60 Hz
Commercial
Rated insulation voltage
Ui
660V
• Small and large offices
Degree of pollution
• Warehouses
Rated current [Aluminum Busbars]:
• Shopping malls
Rated current
le / Ith
up to 4000 A
• Schools
Rated peak withstand current
lpk
up to 132 kA
• Hospitals
Rated short-time withstand current
lcw
up to 65 kA
• Airports
Rated current [Copper Busbars]:
• Railway stations
Rated current
le
up to 6300 A
lpk
up to 250 kA
lcw
up to 100 kA
3
Forms of separation -
form 3b optional,
up to form 4
Industrial
• Printing
• Paper
• Machinery
• Pharmaceutical
• Automotive & pulp
• Chemical industry
• Marine
Mechanical Data
Degree of Protection
According to IEC60529 - External from IP 30 to IP 54;
Internal from IP 2X
Steel Components
Frame
Internal Partitions
Door & Covers
2mm Thick CRCA
1.5mm Thick CRCA
1.5mm Thick &
2mm Thick as optional
Plastic components
BB Supports
Shrouds
Other components
DMC/SMC/FRP
FRP / PVC
Nylon 6 / PC
• Steel
• Cement
• Fertilizer
• Sugar
Utilities
• Power Plants [Thermal, Hydro & Nuclear]
Surface Protection
Epoxy Powder Coated
as per client’s requirement
Busbar
Aluminium /Copper as per
client’s requirement
• Oil & Gas on and off shore
• Petrochemical
• Water treatment plants
• Waste management
• Telecommunications
Standards
Type tested switchgear assemblies (TTA) IS:8623; IEC:60439-1.
Applications
Electrical Data
Buildings, Machinery And Processes
Rated operating voltage
Ue
415V AC
Rated frequency
50 / 60 Hz
Commercial
Rated insulation voltage
Ui
660V
• Small and large offices
Degree of pollution
• Warehouses
Rated current [Aluminum Busbars]:
• Shopping malls
Rated current
le / Ith
up to 4000 A
• Schools
lpk
up to 132 kA
• Hospitals
lcw
up to 65 kA
• Airports
Rated current [Copper Busbars]:
• Railway stations
Rated current
le
up to 6300 A
lpk
up to 250 kA
lcw
up to 100 kA
3
Forms of separation -
form 3b optional,
up to form 4
Industrial
• Printing
• Paper
• Machinery
• Pharmaceutical
• Automotive & pulp
• Chemical industry
• Marine
Mechanical Data
Degree of Protection
According to IEC60529 - External from IP 30 to IP 54;
Internal from IP 2X
Steel Components
Frame
Internal Partitions
Door & Covers
2mm Thick CRCA
1.5mm Thick CRCA
1.5mm Thick &
2mm Thick as optional
Plastic components
BB Supports
Shrouds
Other components
DMC/SMC/FRP
FRP / PVC
Nylon 6 / PC
• Steel
• Cement
• Fertilizer
• Sugar
Utilities
• Power Plants [Thermal, Hydro & Nuclear]
Surface Protection
Epoxy Powder Coated
as per client’s requirement
Busbar
Aluminium /Copper as per
client’s requirement
• Oil & Gas on and off shore
• Petrochemical
• Water treatment plants
• Waste management
• Telecommunications
Standards
Type tested switchgear assemblies (TTA) IS:8623; IEC:60439-1.
Certifications
Motor Control Centers
Operational Safety, Quality and Availability
GEM Plus MCC’s are used to control electric motors and other equipments from a central location, or power is to
be distributed to equipments safely and reliably. The MCC’s are available in Single Front and Double Front or
The fulfillment of all instructions of IS: 8623 / IEC:60439-1 assures a basic level for personnel and
Back-to-Back.
system protection. With GEM Plus, GE exceeds these levels as a standard. The GEM Plus low voltage
switchboard system has been subjected to extensive type tests in compliance with the standards.
GEM Plus MCC’s are sheet steel modular construction and each vertical section is segregated with metallic
barriers and are supplied in fully drawout, semi drawout and fixed version. Each panels are extendable both
side and can be coupled to breaker panels having higher depth either side. Double bended doors and covers
ensure the torsion free and self adhesive gaskets make the panels dust and vermin proof.
360
Nomenclature of MCC’s [Single & Double Front]
BUSBAR CHAMBER
FEEDER UNITS G1
FEEDER UNITS G1
GE continues to conduct tests as a continuous
development program.
The results of these tests are applicable to the various
CABLE ALLEY
In order to ensure the highest possible degree of safety,
2040 = 17 UNIT OF 120MM [G1X17]
2460
FEEDER UNITS G4
FEEDER UNITS G5
FEEDER UNITS G6
low voltage switchgear and control gear assemblies
(TTA) in accordance with IS: 8623 / IEC:60439-1
Our continuous improvement in quality and
Our manufacturing unit is one of the certified EHS
Global Star facility.
60
productivity is driven through lean six sigma ways.
KICK PLATE
540
270
810
FRONT VIEW
510
510
SIDE VIEW [S/F]
510
1020
SIDE VIEW [D/F]
Certifications
Motor Control Centers
Operational Safety, Quality and Availability
GEM Plus MCC’s are used to control electric motors and other equipments from a central location, or power is to
be distributed to equipments safely and reliably. The MCC’s are available in Single Front and Double Front or
The fulfillment of all instructions of IS: 8623 / IEC:60439-1 assures a basic level for personnel and
Back-to-Back.
system protection. With GEM Plus, GE exceeds these levels as a standard. The GEM Plus low voltage
switchboard system has been subjected to extensive type tests in compliance with the standards.
GEM Plus MCC’s are sheet steel modular construction and each vertical section is segregated with metallic
barriers and are supplied in fully drawout, semi drawout and fixed version. Each panels are extendable both
side and can be coupled to breaker panels having higher depth either side. Double bended doors and covers
ensure the torsion free and self adhesive gaskets make the panels dust and vermin proof.
360
Nomenclature of MCC’s [Single & Double Front]
BUSBAR CHAMBER
FEEDER UNITS G1
FEEDER UNITS G1
GE continues to conduct tests as a continuous
development program.
The results of these tests are applicable to the various
CABLE ALLEY
In order to ensure the highest possible degree of safety,
2040 = 17 UNIT OF 120MM [G1X17]
2460
FEEDER UNITS G4
FEEDER UNITS G5
FEEDER UNITS G6
low voltage switchgear and control gear assemblies
(TTA) in accordance with IS: 8623 / IEC:60439-1
Our continuous improvement in quality and
Our manufacturing unit is one of the certified EHS
Global Star facility.
60
productivity is driven through lean six sigma ways.
KICK PLATE
540
270
810
FRONT VIEW
510
510
SIDE VIEW [S/F]
510
1020
SIDE VIEW [D/F]
Compartment and trays
Overall Dimensions of GEM Plus MCC’s
Busbar Rating
Height mm
Up to 1250A
Width mm
2460/2220
1600A
2460/2220
2000~4000A
Depth mm
SF / DF
S/F
D/F
810
510
1020
Bottom
690
1020
Top
690
1020
Bottom
1020
1200
Top
1020
1020
Bottom
1200
1350
Top
810
2460/2220
Cable Entry
810
Outgoing with-drawable units
Drawout units are provided with spring loaded incoming power contact connecting the unit to vertical busbars
and outgoing contact for the cables. Each drawout unit comprises the following locking devices:
•
An automatic door interlock, which prevents the door being opened when the switch is in the ON position.
•
A latch, to prevent the unit from being dropped accidentally if removed too quickly.
•
Plug-in / sliding contact block features available to enable remote control and signaling.
•
A test position is also available whenever required to facilitate testing of control circuits with functional
interlock without energizing the power unit.
The withdrawable compartments are of standard sizes G1, G2, G3, G4, G5 and G6 being multiple of G1 which is 120mm high. One panel front
can accommodate maximum of 17 such basic units of G1 size, the trays in case of fixed module G1 to G17 can be selected based on the
The trays are provided with guides and low friction sliding devices which can smoothly insert and withdraw
along with the guide rails.
Outgoing non-drawable units
In this design feeder components are fitted directly into the cubicle and both power and control terminals are
in fixed version.
810
270
540
CONTROL CONTACT
PLUG-IN
VERTICAL BUSBAR
510
RACKING SPINDLE
OUTGOING POWER
TERMINALS
CONTROL CONTACT
SLIDING
540
VERTICAL BUSBAR
EXTENSION BUSBAR
FOR CABLE TERMINATION
INCOMING POWER TRMNL
OUTGOING POWER
TERMINALS
270
810
SECTIONAL VIEW S/F
RACKING SPINDLE
CONTROL CONTACT
SLIDING
540
270
810
SECTIONAL VIEW D/F
Main Busbar system
The main / horizontal busbars are located in a separate
compartment at the top of the switchboard. The
spacious horizontal busbar compartment has a degree
of protection of IP 54 for upto 1600A and IP 42 for
above rating. The phase bars and neutral bar are
available for current ratings from 500 up to 4000A with
Al and 6300A with Cu. They are secured by SMC/DMC
busbar supports and can be easily extendable on both
sides. Unique arrangement of interleaving system is
adopted for higher rated panels to not only achieve
better dynamic and thermal withstand capacity but
also to reduce temperature rise.
Horizontal auxiliary supply system
OUTGOING POWER TRMNL
1020
EXTENSION BUSBAR
feeder type. Every compartment is provided with a hinged door and a FRP/PVC barrier in between the vertical busbar and tray.
Auxiliary supply system busbars are located in the HBB
chamber separated from HBB, Up to 12 Nos. auxiliary
bars with a current rating of 50A are available.
Vertical distribution busbar system
GEM Plus MCC with drawout/fixed outgoing units
vertical busbars are branched from the main busbar
system. The vertical busbars are located behind the
equipment modules. Vertical busbars are available for
current rating from 630A to 1440A. VBB are covered
with FRP/PVC feeder shrouds having the opening only
for the incoming terminals. Safety shutters are
available optionally.
Earth busbar system
GEM Plus switchboards are supplied with a horizontal
earth busbar 50x10mm Al or 50x6mm Cu and a vertical
earth busbar 20x5mm runs along with the height of the
cable alley in drawout panels and is connected to the
main horizontal earth busbar. Each drawout modules
are fitted with a spring loaded scraping earth which
make first and break last for safety to operating
personnel.
Cable-entry compartment
A separate, lockable cable-alley compartment, along
with the entire height of the feeder compartment, is
provided at the righthand side for power and control
cable termination. On the side wall, cable ladders are
available for cable clamps. The cable-alley
compartment is isolated from the feeder compartments.
The standard cable-alley compartment width is 270
mm. The compartment is provided with an undrilled,
removable gland plate at the bottom of the cubicle.
Compartment and trays
Overall Dimensions of GEM Plus MCC’s
Busbar Rating
Height mm
Up to 1250A
Width mm
2460/2220
1600A
2460/2220
2000~4000A
Depth mm
SF / DF
S/F
D/F
810
510
1020
Bottom
690
1020
Top
690
1020
Bottom
1020
1200
Top
1020
1020
Bottom
1200
1350
Top
810
2460/2220
Cable Entry
810
Outgoing with-drawable units
Drawout units are provided with spring loaded incoming power contact connecting the unit to vertical busbars
and outgoing contact for the cables. Each drawout unit comprises the following locking devices:
•
An automatic door interlock, which prevents the door being opened when the switch is in the ON position.
•
A latch, to prevent the unit from being dropped accidentally if removed too quickly.
•
Plug-in / sliding contact block features available to enable remote control and signaling.
•
A test position is also available whenever required to facilitate testing of control circuits with functional
interlock without energizing the power unit.
The withdrawable compartments are of standard sizes G1, G2, G3, G4, G5 and G6 being multiple of G1 which is 120mm high. One panel front
can accommodate maximum of 17 such basic units of G1 size, the trays in case of fixed module G1 to G17 can be selected based on the
The trays are provided with guides and low friction sliding devices which can smoothly insert and withdraw
along with the guide rails.
Outgoing non-drawable units
In this design feeder components are fitted directly into the cubicle and both power and control terminals are
in fixed version.
810
270
540
CONTROL CONTACT
PLUG-IN
VERTICAL BUSBAR
510
RACKING SPINDLE
OUTGOING POWER
TERMINALS
CONTROL CONTACT
SLIDING
540
VERTICAL BUSBAR
EXTENSION BUSBAR
OUTGOING POWER
TERMINALS
270
810
SECTIONAL VIEW S/F
RACKING SPINDLE
CONTROL CONTACT
SLIDING
540
270
810
SECTIONAL VIEW D/F
Main Busbar system
The main / horizontal busbars are located in a separate
compartment at the top of the switchboard. The
spacious horizontal busbar compartment has a degree
of protection of IP 54 for upto 1600A and IP 42 for
above rating. The phase bars and neutral bar are
available for current ratings from 500 up to 4000A with
Al and 6300A with Cu. They are secured by SMC/DMC
busbar supports and can be easily extendable on both
sides. Unique arrangement of interleaving system is
adopted for higher rated panels to not only achieve
better dynamic and thermal withstand capacity but
also to reduce temperature rise.
Horizontal auxiliary supply system
OUTGOING POWER TRMNL
1020
EXTENSION BUSBAR
feeder type. Every compartment is provided with a hinged door and a FRP/PVC barrier in between the vertical busbar and tray.
Auxiliary supply system busbars are located in the HBB
chamber separated from HBB, Up to 12 Nos. auxiliary
bars with a current rating of 50A are available.
Vertical distribution busbar system
GEM Plus MCC with drawout/fixed outgoing units
vertical busbars are branched from the main busbar
system. The vertical busbars are located behind the
equipment modules. Vertical busbars are available for
current rating from 630A to 1440A. VBB are covered
with FRP/PVC feeder shrouds having the opening only
for the incoming terminals. Safety shutters are
available optionally.
Earth busbar system
GEM Plus switchboards are supplied with a horizontal
earth busbar 50x10mm Al or 50x6mm Cu and a vertical
earth busbar 20x5mm runs along with the height of the
cable alley in drawout panels and is connected to the
main horizontal earth busbar. Each drawout modules
are fitted with a spring loaded scraping earth which
make first and break last for safety to operating
personnel.
Cable-entry compartment
A separate, lockable cable-alley compartment, along
with the entire height of the feeder compartment, is
provided at the righthand side for power and control
cable termination. On the side wall, cable ladders are
available for cable clamps. The cable-alley
compartment is isolated from the feeder compartments.
The standard cable-alley compartment width is 270
mm. The compartment is provided with an undrilled,
removable gland plate at the bottom of the cubicle.
Power Control Centers
Overall Dimensions of GEM Plus PCC’s
Busbar Rating
GEM Plus PCC’s are used as main LT switchboards for distribution and control of power. The PCC panels are
Height mm
PCC
offered either in single tire or two tire configuration. PCC’s are suitable for coupling with single front and double
front MCC’s to make the switchboard as PMCC.
Width mm
Depth mm
I/C & O/G
B/C
I/C Busduct
Entry
Up to 630A
2460
600
1020
1350
1350
800~1250A
2460
600
1350
1350
1500
safety i.e. Metering chamber, Circuit breaker chamber and Relay chamber, each sections having its own doors.
1600A
2460
810
1350
1350
1500
Double bended doors and covers ensure the torsion free and self adhesive gaskets make the panels dust and
2000~4000A
2460
810
1710
1710
1710
GEM Plus PCC’s are sheet steel modular construction, each PCC’s are provided with segregated compartment for
960
vermin proof.
Two tire
Spacious bottom cable space are provided and are also suitable for either cable or busduct entry from
Two tire
Barriers are provided between the incoming and outgoing terminals of ACB for added safety.
BUSBAR CHAMBER
2000A
NOMENCLATURE OF PCC's [TWO TIRE]
360
360
BUSBAR CHAMBER
780
540
CONTROL/METERING CHAMBER
METERING CHAMBER
BREAKER CHAMBER
780
810
2460
BREAKER CHAMBER
BREAKER CHAMBER
750
RELAY CHAMBER
540
RELAY CHAMBER
330 /480/ 690
600 / 810 / 960
FRONT VIEW
1020
1350 / 1500 / 1710
SIDE VIEW [D/F]
330 / 480
870
FRONT VIEW
870
1500
2460
870
1500
Up to 1250A
top/bottom. For single core cables, aluminium gland plates are provided to eliminate the magnetic effect.
NOMENCLATURE OF PCC's [SINGLE TIRE]
2460
1020
1350 / 1500
SIDE VIEW [D/F]
Power Control Centers
Overall Dimensions of GEM Plus PCC’s
Busbar Rating
GEM Plus PCC’s are used as main LT switchboards for distribution and control of power. The PCC panels are
Height mm
PCC
offered either in single tire or two tire configuration. PCC’s are suitable for coupling with single front and double
front MCC’s to make the switchboard as PMCC.
Width mm
Depth mm
I/C & O/G
B/C
I/C Busduct
Entry
Up to 630A
2460
600
1020
1350
1350
800~1250A
2460
600
1350
1350
1500
safety i.e. Metering chamber, Circuit breaker chamber and Relay chamber, each sections having its own doors.
1600A
2460
810
1350
1350
1500
Double bended doors and covers ensure the torsion free and self adhesive gaskets make the panels dust and
2000~4000A
2460
810
1710
1710
1710
GEM Plus PCC’s are sheet steel modular construction, each PCC’s are provided with segregated compartment for
960
vermin proof.
Two tire
Spacious bottom cable space are provided and are also suitable for either cable or busduct entry from
Two tire
Barriers are provided between the incoming and outgoing terminals of ACB for added safety.
BUSBAR CHAMBER
2000A
NOMENCLATURE OF PCC's [TWO TIRE]
360
360
BUSBAR CHAMBER
780
540
METERING CHAMBER
BREAKER CHAMBER
780
810
2460
BREAKER CHAMBER
BREAKER CHAMBER
750
RELAY CHAMBER
540
RELAY CHAMBER
330 /480/ 690
600 / 810 / 960
FRONT VIEW
1020
1350 / 1500 / 1710
SIDE VIEW [D/F]
330 / 480
870
FRONT VIEW
870
1500
2460
870
1500
Up to 1250A
top/bottom. For single core cables, aluminium gland plates are provided to eliminate the magnetic effect.
NOMENCLATURE OF PCC's [SINGLE TIRE]
2460
1020
1350 / 1500
SIDE VIEW [D/F]
REGIONAL OFFICES
BRANCH OFFICES
NORTH
New Delhi
Chandigarh
Jaipur
Lucknow
71/1, Shivaji Marg
New Delhi-110015
Ph: (011) 45052277/8
Fax: (011) 25928088
SCO No. 72 & 73, First Floor
Sector 8/C, Madhya Marg
Chandigarh-160008
Ph: (0172) 3982908-10
Fax: (0172) 3982905
448, 4th Floor, Ganapati Plaza
M.I. Road, Jaipur-302001
Ph: (0141) 5112802
Fax: (0141) 2389012
101, Ace Business Center
19, Vidhan Sabha Marg
Lucknow-226001
Ph: (0522) 3203808, 3012444/666
Fax: (0522) 4045909
Bangalore
Chennai
Coimbatore
Cochin
Hyderabad
Bangalore-560008
Ph: (080) 41434000
Fax: (080) 41434199
Temple Tower, 6th Floor
476, (New No. 672) Anna Salai
Nandanam
Chennai-600035
Ph: (044) 45070470-84
Fax: (044) 45070474
No.36/6 & 7, 1st Floor
Ashirwad Building
D.B.Road, R.S. Puram
Coimbatore-641002
Ph: (0422) 4393520 / 4393529
Mayur Business Center & Motel
Chittur Road, Pullepadi Junction
Cochin-682035
Ph: (0484) 2364139
Fax: (0484) 4031400
5-2-45, Hyderbasti, RP Road
Near Gujarati High School
Secunderabad-500003
Ph: (040) 27543162, 66311264
Fax: (040) 66339272
Mumbai
Ahmedabad
Pune
361/362, Solitaire Corporate Park
M. Vasanji Road, Chakala
Andheri (E), Mumbai-400093
Ph: (022) 40101610
Fax: (022) 40101611
405-406, Kirtiman Complex
Kinariwala House, Behind Citibank
Off C.G. Road, Ahmedabad-380006
Ph: (079) 65427385/55427389
Fax: (079) 26460637
GE Money Financial Services Limited
Shop No. 405-410, 4th Floor
City Point, Dhole Patil Road
Pune-411001
Mob: +91 9850867507
SOUTH
WEST
GEM Plus
Custom-Built Low Voltage
Switchboard System
EAST
Kolkata
Horizon Building, 4th Floor
57, Chowringhee Road
Kolkata-700071
Ph: (033) 40034056
Fax: (033) 40034071
We are committed to continuous development and improvement of our products and the specifications are
subject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
g and General Electric are registered trade marks of General Electric Co. USA
©
Works:
Plot No. 42/1 & 45/14
Electronic City - Phase II
Bangalore-560100
Ph: (080) 41113000
Fax: (080) 28528469/552
HO:
Bangalore-560008
Ph: (080) 41434000
Fax: (080) 41434199
Email: [email protected]
Toll Free No:
18001024343
Customer Care:
[email protected]
MCC’S - PCC’S
Draw-out & fixed.

GEM Plus - GE Industrial Solutions

Transcription

Similar documents

BOOK YOUR Build•A•Party Celebrate Summer! - Build-A

the Vitaeris 320 Brochure

A golden opportunity to A golden opportunity to

I AM the Oconomowoc Chamber

Chamber of Commerce Memorial Brick flyer

Byrdstown Pickett County Chamber of Commerce 2015

The Chamber Times

Chamber News - Wednesday, October 9, 2013

Membership Application - Warrensburg Chamber of Commerce

HR Diversity Council Brochure