knockouts

Transcription

knockouts

www.greenlee.com
KNOCKOUTS
Want Speed? Try the Greenlee SPEED PUNCH™ System.
Want Self Centering? Slug Splitter / Slug Buster® SC.
Want Size? Large-Diameter Stainless Steel Knockouts.
Want the widest range of fast, reliable knockouts?
Try Greenlee.
Contents
Speed Punch™ Knockouts 60
Electric & Battery-Powered Knockout Kits62
Slug-Splitter SC™ Knockout Punches/Kits 64
Slug-Buster® Hydraulic Knockouts/Kits 66
Slug-Buster® Knockouts/Kits 72
Standard Hydraulic Knockout Kits 77
Standard Knockout Kits 79
Knockouts For Stainless Steel 82
Slug-Buster® Knockouts 84
Standard Knockouts 86
Special Application Punches 88
Knockout Parts Cabinets 91
Draw Studs For Knockouts 92
Stud Punches 96
C-Frame Punches 98
Manual Hydraulic Pumps 99
Hydraulic Pump Accessories 100
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
Knockouts
SELECTION GUIDES
Holemaking Selection Guide
MATERIAL
material Type
Thickness
of Holes
ProductS
application Considerations
pages
Steel
10GA
Highest
Slug-Splitter SC™ Punches
Maximum durability and universal
material usage
Maximum hole size 2-3/8 inches
64-67
Speed Punch™ Punches
60-61
Stainless Steel
10GA
High
Slug-Buster Punches
68-80
10GA
High
Standard Punches
81-87
10GA
8GA
Medium-High
High
Ultra Cutters
Carbide-Tipped Hole Cutters
120
119
10GA
Medium-High
Step Bits
104-105
10GA
10GA
Medium
Highest
Hole Saws
121-122
64-67
10GA
Highest
Lrg. Dia. Punches for Stainless
Maximum hole size 6 inches
Maximum durability and universal
material usage
Hole size 2-1/2 – 4 inches
9GA
Medium-High
Maximum hole size 3 inches, quick change cutting
heads
118
Cuts through nails, good chip removal, max hole
size 1 inches
Cuts through nails, good chip removal, max hole
size 1-1/4 inches
Self feed screw for hard or soft woods, max hole
size 4-5/8 inches
Maximum hole size 1-3/8 inches, low chip removal
Maximum durability and universal material usage
Maximum durability and universal material usage
Replaceable blades
Adjustable or fixed, sprinkler heads or lighting
Non-round holes
106
®
8GA
Medium-High
Quick Change CarbideTipped Cutter
Carbide-Tipped Hole Cutters
18"
High
Nail Eater® RT
18"
High
Nail Eater II® Bits
2–2 x 4’s
High
E-Z Bore® Bits
Aluminum
2x4
16"
1-5/8" or 2 x 4
10GA
High
Medium
High
Highest
Step Bits
Spade Bits
Hole Saws
Fiberglass/Plastic
10GA
10GA
10GA
10GA
10GA
approx. 1/8"
High
High
High
High
Medium
Highest
Slug-Buster® Punches
Standard Punches
Ultra Cutters
Step Bits
Hole Saws
approx. 1/8"
approx. 1/8"
1-5/8"
7/8"
7/8"
7/8"
High
High
High
Medium-High
Medium
High
Medium-Low
Medium
Standard Punches
Ultra Cutters
Step Bits
Hole Saws
Recessed Light Hole Saws
Quick Cutter
Keyhole Saw
approx. 1/8"
High
High
Carbide-Grit Hole Saws
High
Carbide-Grit Hole Saws
D’versibits®
Non-Round Punches
Reciprocating Blades
Wood
Drywall/Ceiling Tile
Quazite®* Enclosures
Cement Board/Hardy Board Siding
Existing Wall
Non-Round Hole
Metric & Non-Conduit Sizes
Metal Studs
High
Medium
16-10GA
20GA
TRUSTED
58
NUMBER
SINCE
1862
High
PHONE 800.435.0786
FAX 800.451.2632
119
107
110
104-105
111-112
121-122
64-67
60-61
68-80
81-87
120
104-105
121-122
64-67
60-61
68-80
81-87
120
104-105
121-122
126
126
131
68-80
123
Remodeling, phone, cable, alarm installation
Square, rectangular, electronic connector holes
Standard Punches
Stud Punches
USA
67
123
113-117
88-90
128-129
81-87
96-97
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Knockout Punch Selection Guide
Driver Type
drive method
capacity
size range available
Pages
Speed PunchTM
Hydraulic or Battery
Mild steel
up thru 10 gauge (3.5 mm)
1.115" through 2.416" dia. (28.3 mm
through 61.4 mm)
60-61
Slug-Splitter™ &
Slug-Splitter SC™
Ratchet, Hydraulic or Battery
Stainless steel or mild steel
.598" through 2.526" dia. (15.2 mm
through 64 mm)
64-67
Slug-Buster® &
Slug-Buster SC®
Manual, Ratchet, Hydraulic or Battery
Mild steel
.492" through 2.52" dia. (12.5 mm
through 64.0 mm)
68-80
Standard Round
Manual, Ratchet, Hydraulic or Battery
Mild steel up thru 10 gauge
(3.5 mm)
.500" through 6.375" dia. (12.7
through 161.9 mm)
81-87
Description
• Punch holes from any angle with the 360° rotating head.
• Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge
stainless steel.
• Slim, compact and lightweight design for reduced fatigue and easy control.
• Automatic retraction prevents damage to punch and die.
• One trigger controls all tool functions, no additional manual work required.
• LED light illuminates dark work areas.
AVAILABLE DRIVER Kits
Driver with Speed Punch™ Punches
Pages
60-61
Driver Only and Driver with
62-63
Battery-Powered or
Corded Hydraulic Driver
(18V Li-Ion Battery or
120VAC Adapter)
• Develops 6.7 tons of hydraulic force.
• Available with a choice of three battery chargers – 120V.
• Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed
Punch™, Slug-Buster® and standard knockout punches and 12 gauge
(2.5 mm) stainless steel with Greenlee Slug-Splitter SC™
knockout punches.
62-63
Hand Pump Hydraulic
Driver with Ram
• Foot operation frees both hands to operate punch.
• Powerful hydraulic ram develops 11 tons of hydraulic force.
knockout punches.
Driver with Slug-Buster®
SC Punches
64-65
68-69
Driver with Standard Punches
81-82
Foot Pump Hydraulic
Driver with Ram
• Powerful hydraulic ram develops 11 tons of hydraulic force.
knockout punches.
Slug-Buster ® Punches
70-71
Quick Draw® Hydraulic
Driver
• Quick Draw driver is perfect for
fast, straight-on panel punching.
Quick Draw 90®
Hydraulic Driver
• Quick Draw 90 right-angle design
allows greater versatility in tight
spaces.
Driver with Speed Punch™ Punches
60-61
72-73
Knockout Punch Driver Selection Guide
Driver Type
Battery-Powered Driver
(18V Li-Ion Battery)
USA
• Develops 8 tons of hydraulic force
for easy punching.
• Punches up through 10 gauge
(3.5 mm) mild steel with Greenlee
Speed Punch™, Slug-Buster®
and standard knockout punches
and 10 gauge (3.5 mm) stainless
steel with Greenlee Slug-Splitter
SC™ knockout punches.
Quick Draw® Flex
Hydraulic Driver
• Quick Draw Flex allows unlimited
driver orientation.
High Leverage Ratchet
Driver
• Time saving ball bearing head punches faster than wrench method.
knockout punches.
74
Manual Ratchet
Driver
• Unique punch profile splits slugs allowing easy slug removal.
• 1" Hex Ratchet Wrench allows use with both 3/8" (19.1 mm) and 3/4"
(9.5 mm) draw studs.
• Slug-Buster® Punches available in sizes up thru 2.52" (64.0 mm).
• Standard round punches available up to 5 5/8" (144.1 mm).
Driver with Slug-Buster ® Punches
75
Driver with Slug-Buster ®
Metric Punches
Driver with Standard Metric Punches
77
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
85
www.greenlee.com
59
Knockouts
SPEED PUNCH ™ Knockouts
Speed Punch™ Knockout System
SAVE TIME AND MONEY WITH
EVERY PUNCH!
From the leaders in knockout technology comes the new SPEED PUNCH™ System.
The patent pending “no-thread” design eliminates cross-threading, while the
innovative SPEED LOCK mechanism quickly secures the punch in place. This
means longer tool life and faster punches, saving you time and money on the job.
SPEED PUNCH™ is available in 3/4” - 2” conduit sizes and three kit configurations.
• Punch up to 10 gauge mild steel, aluminum, fiberglass or plastic.
• Use with hydraulic and battery-powered drivers.
• Available in 3/4” - 2” conduit sizes and three kit configurations.
A product video is
available, scan this QR
code or visit:
SPECIFICATIONS
www.youtube.com/GreenleeDEMO
Capacity
Application
Hole Sizes
Operation
Mild steel up through 10 gauge (3.5 mm)
Mild steel, fiberglass and plastic enclosures.
Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 3/4"
conduit size actually makes a 1-3/32" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operate with battery, hydraulic driver only.
“No-thread” punch design quickly and easily slides on/
off draw stud: The fastest punch system on the market today.
* Compared to standard threaded punch & draw stud set-up and disassembly.
It’s as simple as:
1
SLIDE
Slide die and punch onto draw stud:
“No-thread” design eliminates crossthreading.
2
3
Secure SPEED LOCK onto draw stud:
Faster setup and disassembly.
TRUSTED
60
SECURE
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
PUNCH
Punch hole: Save time and money with every
punch!
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Speed Punch™ Knockout System
7906SBSP
LS50L11SP
HOLE SIZE
CAT. NO.
UPC NO.
DESCRIPTION
CAPACITY
MILD STEEL
ACTUAL
CONDUIT &
PIPE SIZE
LS50L11SP/
01081
7906SBSP/
09278
7905SBSP/
01081
Ø mm
GA
mm
7212SP-3/4P
00952
Punch, 3/4" Conduit, Speed
Punch
3/4"
-
1.115
28.3
10
3.5
✓
✓
✓
7212SP-1P
00953
1"
-
1.362
34.6
10
3.5
✓
✓
✓
7212SP-1-1/4P
00955
1-1/4"
1-11/16"
1.701
43.2
10
3.5
✓
✓
✓
7212SP-1-1/2P
09282
1-1/2"
1-15/16"
1.951
49.6
10
3.5
✓
✓
✓
7212SP-2P
09283
2"
2-3/8"
2.416
61.5
10
3.5
✓
✓
✓
7212SP-3/4D
09279
3/4"
-
1.115
28.3
10
3.5
✓
✓
✓
7212SP-1D
09280
1"
-
1.362
34.6
10
3.5
✓
✓
✓
7212SP-1-1/4D
09281
1-1/4"
1-11/16"
1.701
43.2
10
3.5
✓
✓
✓
7212SP-1-1/2D
00956
1-1/2"
1-15/16"
1.951
49.6
10
3.5
✓
✓
✓
7212SP-2D
00957
2"
2-3/8"
2.416
61.5
10
3.5
✓
✓
✓
SP-LOCK
09277
Punch, 1" Conduit, Speed
Punch
Punch, 1-1/4" Conduit,
Speed Punch
Punch, 1-1/2" Conduit,
Speed Punch
Punch, 2" Conduit, Speed
Punch
Die, 3/4" Conduit, Speed
Punch
Die, 1" Conduit, Speed
Punch
Die, 1-1/4" Conduit, Speed
Punch
Die, 1-1/2" Conduit, Speed
Punch
Die, 2" Conduit, Speed
Punch
Speed Lock
✓
✓
✓
7212SP11
10002
✓
✓
✓
7212SP12*
00979
34403
34403
✓
-
-
Ø INCH
7905SBSP
Draw Stud, 3/4" X 4.77",
Speed Punch
Draw Stud, 3/4" X 5.63",
Speed Punch
Kwik-Stepper #3 Step Bit
✓
✓
Plastic Case
✓
✓
✓
✓
33786
33786
52178
52178
Quick Draw 90 Punch
Driver
120V Charger
52177
52177
18V 1.5 Ah Li-Ion Battery
✓
LS50LB
01131
✓
KK50LFLEX
00185
LS50 Punch Driver and
Case Only (No Battery,
Charger, or accessories)
LS50 Plastic Case Only
✓
*For use with 746 Hydrauluc RAM
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
61
Knockouts
ELECTRIC & BATTERY-POWERED KNOCKOUT KITS
LS50L Battery-Powered Knockout Punch Driver
• Punch holes from any angle with the 360° rotating head.
• Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge
stainless steel.
• Slim, compact and lightweight design for reduced fatigue and easy control.
• Automatic retraction prevents damage to punch and die.
• One trigger controls all tool functions, no additional manual work required.
• Non-slip rubber grip for firm and comfortable hold.
• LED light illuminates dark work areas.
AVAILABLE AS
BARE
TOOL
SPECIFICATIONS
Weight (driver with battery)
Maximum Punch Force
Charging Time
Battery Voltage
A product video is
available, scan this QR
code or visit:
B
Cat. No.
UPC No.
LS50L11A
04951
LS50L11B
04956
LS50LB
01131
www.youtube.com/GreenleeDEMO
5.05 lbs (2.29kg)
6 Tons (60kN)
22 min (RAL2/BL1380) or 15 min (RAL1/BL1815)
18V
Description
Punching Tool Kit Includes: LS50L Battery Driver,
(1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer
(1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8
Drawstud (209633)
Punching Tool Kit Includes: LS50L Battery Driver,
(1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer
(1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8
Drawstud (209633), Slugbuster punches and dies for (1/2”,
3/4”, 1”, 1-1/4”, 1 1/2” and 2”) conduit
LS50 punch driver and case only (no battery, charger, or
accessories).
DRAW STUDS
AND MISC.
PUNCHES
AND DIES
Battery-Powered Knockout Punch Driver Kits Parts List
CAT NO.
UPC NO.
721-1/2
31756
DESCRIPTION
1/2" Conduit Size Slug-Buster® Punch
HOLE SIZE
CONDUIT
ACTUAL
& PIPE
ø INch
SIZE
1/2"
7/8
14722
14722
1/2" Conduit Size Die
1/2"
7/8
0.885
22.5
721-3/4
31757
3/4"
—
1.115
28.3
✓
124AV
06972
3/4"
—
1.115
28.3
✓
721-1
31758
1" Conduit Size Slug-Buster® Punch
1"
—
1.362
34.6
✓
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
✓
721-1-1/4
31759
1-1/4" Conduit Size Slug-Buster® Punch
1-1/4"
1-11/16
1.701
43.2
✓
128AV
04013
1-1/4" Conduit Size Die
1-1/4"
1-11/16
1.701
43.2
✓
721-1-1/2
31760
1-1/2"
1-15/16
1.951
49.6
✓
440AV
04061
1-1/2"
1-15/16
1.951
49.6
✓
721-2
31761
2"
2-3/8
2.416
61.5
✓
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
✓
1614SS
30043
Draw Stud - 3/8" x 2-13/16"
✓
✓
31872
31872
Draw Stud - 3/4" x 4-1/8"
✓
✓
1924AA
03248
Spacer Short
✓
✓
33967
33967
Stud Adapter - 3/8"
✓
✓
TRUSTED
62
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
0.885
ø MM
22.5
CANADA
KIT CAT./UPC NO.
LS50L11A
LS50L11B
LS60LA11
LS60LB11
LS60LA120
LS60LB120
✓
✓
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
LS60L Battery-Powered Knockout Punch Driver Kits
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Punching cycle stops automatically when hole is complete to prevent
damage to punch
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered punching tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V battery charger or with 120V corded adapter in place
of batteries and charger
LS60LA11
SPECIFICATIONS
Cat. No.
Weight (driver with battery only)
Overall Length (ram
retracted)
Height
Maximum Punch Force
Maximum Round Punch Size
(in 10 gauge mild steel)
Maximum Square Punch Size
(in 10 gauge mild steel)
Maximum Rectangular Punch
Size (in 10 gauge mild steel)
Maximum Ram Travel
Charging Time
Battery Voltage
8.8 lbs. (4.0 kg)
11.5 in. (292 mm)
UPC No.
Description
12.5 in. (318 mm)
6.7 tons (60 kN)
2.42 in. dia. (61.5 mm dia)
LS60LA11
LS60LB11
LS60LA120
LS60LB120
KKLS60LGL
52176
12274
12274
Strap
2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm)
52178
52178
120V Charger
52179
52179
230V Charger
52180
52180
12V Charger
1.378 x 2.559 in. (35.0 x 65.0 mm)
0.87 in (22 mm)
Approximately 1 hour
18 V, 3.0Ah, Li-ion
52155
52158
52161
52163
25749
52176
Battery Punch Driver -120 Volt Charger
Battery Punch Driver -120 Volt Charger
Punch Driver - 120 Volt AC Adapter
Punch Driver - 120 Volt AC Adapter
Carry Case
18V, 3.0Ah, Li-ion Battery
See kit contents on page 62.
steel capacities for conduit sizes
Stud and
Accessories
Slug-Splitter SC™
1/2"
3/4"
1-7/32"
1"
1-1/4"
1-1/2"
2"
1/2"
3/4"
conD.
conD.
conD..
conD.
conD.
conD.
conD.
conD.
conD.
1-7/32"
1"
1-1/4"
1-1/2"
2"
conD.
conD.
conD.
conD.
ø 1.951"
49.6mm
ø 2.416"
61.5mm
ø 0.885" ø 1.115" ø 1.210" ø 1.362" ø 1.701" ø 1.951 ø 2.415" ø 0.885" ø 1.115" ø 1.210" ø 1.362" ø 1.701"
22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm
1614SS Draw Stud
1924AA Spacer
33967 Adapter
1924AA Spacer
1
29451 7/16" Draw Stud
1924AA Spacer
31872 3/4" Draw Stud
31872 3/4" Draw Stud
Electronic Connector Punches
RS-232, 229, 231, 234, 238
Standard Punches and Slug-Buster®
33967 Adapter
1
29451 sold separately. See page 94 for ordering information.
USA
10 Ga. (0.1345" [3.5 mm]) Mild Steel
10 Ga. (0.1345" [3.5 mm]) Stainless Steel
12 Ga. (0.1046" [2.5 mm]) Stainless Steel
16 Ga. (0.0598" [1.5 mm]) Mild Steel and 1/8" Aluminum
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
63
Knockouts
SLUG-SPLITTER SC™ KNOCKOUT KITS
Slug-Splitter SC™ Ram and Hand Pump Hydraulic Driver Punch Kits
All Kits Feature:
• Slug-Splitter SC™ (Self Centering) knockout punches with capacities up through 10
gauge (3.5 mm) stainless steel. Refer to individual punch capacity ratings.
• Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC™)
• No need to draw crosshairs or line up die alignment marks. (Slug-Splitter SC™)
Designed for
stainless steel
applications
7506 Kit Features
• Fast, easy and simple to operate.
• Compact design makes this a perfect choice for use on construction sites and
maintenance jobs.
• Will also drive 751 Cable Cutter head.
• Powerful 11-ton hydraulic ram.
• 3-foot hose.
SPECIFICATIONS
Operation
7506 Punch Kit
7307/29528 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex Hydraulic Drivers,
Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers.
744/29619 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex Hydraulic Drivers,
Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers.
7506/30385 - Hydraulic Ram and Hand Pump included.
Weight
7307 Punch Kit
(driver not included)
Cat. No. UPC No.
Description
Lbs. kg.
744
29619
5
2.3
7307
29528
10.4
4.7
7506
30385
1/2” through 1-1/4” Conduit Size Slug-Splitter SC Knockout
Punch Kit
1/2” through 2” Conduit Size Slug-Splitter SC™
Knockout Punch Kit
1/2” through 2” Conduit Size Slug-Splitter SC™
Knockout Punch Kit with Hydraulic Ram and Hand Pump
32
14.5
NOTE: See Slug-Splitter SC™ knockout punch units on pages 82-83 for list of individual punches, dies and draw studs.
744 Punch Kit
(driver not included)
TRUSTED
64
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Hole Size
Cat. No.
UPC No.
28154
28155
28156
28157
36490
36489
28158
28159
28160
28161
28162
28163
28165
28166
29451
29452
29529
19193
31068
746SS
28154
28155
28156
28157
36490
36489
28158
28159
28160
28161
28162
28163
28165
28166
29451
29452
29529
19193
31068
30387
54167
54168
15908
54167
54168
15908
1924AA
1925AA
1926AA
767
38316
03248
03249
06904
13284
38316
54169
54170
06302
54169
54170
06302
USA
PHONE 800.435.0786
FAX 800.451.2632
Conduit &
Actual
Description
Pipe Size
1/2" Conduit Size Punch
1-7/32" Punch Oiltight
1-7/32" Die Oiltight
1" Conduit Size Punch
1" Conduit Size Die
1-1/4" Conduit Size Punch
2" Conduit Size Die
7/16" x 4-1/4" Draw Stud
3/4" x 5-1/2" Draw Stud
Metal Case
Metal Case
Metal Case
Ram (includes 1 each of the following 3 items)
1/4" Female Coupler
Dust Plug
Spacer Group (includes 1 each
of the following 3 items)
Spacer-Short
Spacer-Medium
Spacer-Long
Hydraulic Hand Pump
High Pressure Hose Unit–1/4"
x 3' (includes 1 each of the following 3 items)
1/4" Male Coupler
Dust Cap
High Pressure Hose–1/4" x 3'
1/2"
1/2"
3/4"
3/4"
—
—
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2"
ø inch
7/8
7/8
—
—
1-7/32
1-7/32
1-11/32
1-11/32
1-11/16
1-11/16
1-15/16
1-15/16
2-3/8
2-3/8
CANADA
PHONE 866.384.8813
FAX 800.524.2853
Capacity
Stainless Steel
.885
.885
1.115
1.115
1.210
1.210
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
ø mm
22.5
22.5
28.3
28.3
30.5
30.5
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
GA
10
10
10
10
10
10
10
10
10
10
10
10
10
10
mm
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
Kit Cat./UPC No.
744/
7307/
7506/
29619
29528
30385
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
65
Knockouts
KNOCKOUTS for stainless steel
Slug-Splitter SC™ and Slug-Splitter Knockout Punches
• Slug-Splitter SC™ heavy-duty punches are designed to punch up through
10 gauge (3.5 mm) stainless steel.
• Unique slug-splitting design and tool steel construction easily punch
10 gauge (3.5 mm) mild steel and stainless steel.
• Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC™)
• No need to draw crosshairs or line up die alignment marks.
(Slug-Splitter SC™)
• Unique punch profile also splits slugs for easier slug removal.
• Heavy-duty dies and stainless steel draw studs for longer life.
• Excellent abrasion resistance for punching fiberglass and plastic.
• Slug-Splitter SC™ punch units consist of: punch, die and draw stud.
Check individual punch for specific capacity.
• Patent Pending for Self-centering Slug-Splitter SC™.
SPECIFICATIONS
Capacity
Application
Hole Sizes
Slug is split in half as
punching operation is
completed.
Unique Slug-Splitter
SC™ punch design
creases slug as the
punch is drawn into
the die.
Split slugs fall free
from the die and stud.
Operation
Stainless steel up through 10 gauge (3.5 mm)
10-gauge stainless steel, mild steel, fiberglass and plastic enclosures.
Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example:
1/2" conduit size actually makes a 7/8" hole.
Operate with battery, hydraulic or high leverage ratchet driver only.
self centering – Slug-splitter sc™ knockout punches 0.885" to 2.416"
Hole Size
Punch
Die
Cat./UPC No.
Cat/UPC No & Pipe
ø (inch)
28154
28155
1/2"
7/8
28156
28157
3/4"
-
36490
36489
-
28158
28159
28160
28162
28165
Conduit
Capacity
Actual
Draw Studs
Stainless Steel
Hydraulic Drivers
Ratchet Driver
ø (mm)
Pg
ISO
GA.
(mm)
7804/7904 7646/7625
1904
0.885
22.5
16
-
10
3.5
29451
29451
30227
1.115
28.3
21
-
10
3.5
31872
29452
12099
1-7/32
1.210
30.5
-
-
10
3.5
31872
29452
12099
1"
1-11/32
1.352
34.6
-
-
10
3.5
31872
29452
12099
28161
1-1/4"
1-11/16
1.701
43.2
-
-
10
3.5
31872
29452
12099
28163
1-1/2"
1-15/16
1.951
49.6
-
-
10
3.5
-
29452
12099
28166
2"
2-3/8
2.416
61.5
-
-
10
3.5
-
29452
12099
Standard – Slug-Splitter Knockout Punches 0.598" to 2.520"
31117
04599
31126
04598
-
-
0.598
0.638
15.2
16.2
9
-
16
-
12
12
2.5
2.5
29451
29451
29451
29451
30227
30227
31119
31128
-
-
0.732
18.6
11
-
12
2.5
29451
29451
30227
31120
31129
-
-
0.803
20.4
13
20
12
2.5
29451
29451
30227
04602
04601
-
1
1.000
25.4
-
25
10
3.5
31872
29451
30227
04605
04603
-
-
1.280
32.5
-
32
10
3.5
31872
29452
12099
31122
31135
-
-
1.457
37.0
29
-
10
3.5
31872
29452
12099
04608
04607
-
-
1.595
40.5
-
40
10
3.5
31872
29452
12099
31123
31131
-
-
1.850
47.0
36
-
10
3.5
-
29452
12099
04611
04609
-
2
2.000
50.8
-
50
10
3.5
-
29452
12099
31124
31132
-
2 1/8
2.125
54.0
42
-
10
3.5
-
29452
12099
31125
31133
-
-
2.362
60.0
48
-
10
3.5
-
29452
12099
04614
04613
-
-
2.520
64.0
-
63
10
3.5
-
29452
12099
* 16 ga. stainless steel capacity with ratchet driver.
TRUSTED
66
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Slug-Splitter SC™ and Slug-Splitter Knockout Punches
Punch Units
self centering – Slug-splitter sc™ knockout punches 0.885" to 2.416"
PUNCH UNIT - INCLUDES
Punch, Die & Draw
CAPACITY
Stainless Steel
Weight
Driver
Draw
Stud
MM
GA
MM
LBS.
kg
1904
745R-1/2
745H-1/2
30384
29560
1/2"
1/2"
7/8
7/8
22.5
22.5
16
10
1.5
3.5
.6
.7
.27
.32
x
740H-1-7/32
Oil Tight
745H-3/4
29563
-
1-7/32
30.5
10
3.5
1.2
.54
12318
3/4"
1-3/32
28.3
10
3.5
1.26
.57
x
29452
745H-1
12319
1"
1-11/32
34.6
10
3.5
1.51
.68
x
29452
745H-1-1/4
12320
1-1/4"
1-11/16
43.2
10
3.5
1.96
.89
x
29452
745H-1-1/2
12321
1-1/2"
1-15/16
49.6
10
3.5
2.49
1.13
x
29452
745H-2
12322
2"
2-3/8
61.5
10
3.5
3.69
1.67
x
29452
Catalog No.
UPC No
Hole Size
Conduit &
Pipe Size IN
7804/7904 LS60*
7646/7625
x
x
x
30227
29451
x
x
x
29452
Standard – Slug-Splitter Knockout Punches 0.598" to 2.520"
745M-15.2
12323
-
0.598
15.2
12
2.5
.98
.44
x
29451
745M-16.2
12324
-
0.638
16.2
12
2.5
.97
.44
x
29451
745M-18.6
12325
-
0.732
18.6
12
2.5
.98
.45
x
29451
745M-20.4
12326
-
0.803
20.4
12
2.5
.96
.44
x
29451
745M-25.4
12317
-
1.000
25.4
10
3.5
1.05
.48
x
29451
745M-32.5
12327
-
1.280
32.5
10
3.5
1.53
.69
x
29452
745M-37
12328
-
1.457
37
10
3.5
1.68
.76
x
29452
745M-40.5
12329
-
1.595
40.5
10
3.5
1.83
.83
x
29452
745M-47
12330
-
1.850
47
10
3.5
2.3
1.04
x
29452
745M-50.8
12331
-
2.000
50.8
10
3.5
2.91
1.32
x
29452
745M-54
12332
-
2.125
54
10
3.5
2.90
1.31
x
29452
745M-60
12333
-
2.362
60
10
3.5
3.63
1.65
x
29452
745M-64
12334
-
2.520
64
10
3.5
3.87
1.75
x
29452
* Battery-Powered or Corded Knockout Punch Driver
Large Diameter Knockouts for Stainless Steel
cat no.
7308
• Makes clean & accurate holes.
• For conduit sizes 2-1/2”, 3”, 3-1/2” & 4”.
• Rated for punching in up to 10 gauge stainless steel.
• Excellent abrasion resistance for punching fiberglass
and plastic.
• Kit includes punches, dies, draw stud and sleeve.
• High-Impact, rugged plastic carrying case (kit only).
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
upc no.
7308
06176
745H-2-1/2
06183
745H-3
06190
745H-3-1/2
06206
745H-4
06213
1557SS
00622
00626
00623
00627
00624
00629
00625
00630
00785
00622
00626
00623
00627
00624
00629
00625
00630
PHONE +1.815.397.7070
FAX +1.815.397.9247
description
Kit Includes: Punches and Dies for 2-1/2", 3" & 4"
Conduit, Draw Stud (29452), Sleeve (1557SS) and
Case
Punch Unit for 2-1/2" Conduit Includes: Punch, Die
& Draw Stud (29452)
Punch Unit for 3" Conduit Includes: Punch, Die &
Draw Stud (29452)
Punch Unit for 3-1/2" Conduit Includes: Punch, Die
& Draw Stud (29452)
Punch Unit for 4" Conduit Includes: Punch, Die &
Draw Stud (29452)
Hydraulic Punch Sleeve (SS)
2-1/2" Replacement Punch
2-1/2" Replacement Die
3" Replacement Punch
3" Replacement Die
3-1/2" Replacement Punch
3-1/2" Replacement Die
4" Replacement Punch
4" Replacement Die
www.greenlee.com
67
Knockouts
SLUG-Buster® Hydraulic KNOCKOUT KITS
Slug-Buster® Ram and Hand Pump Kits (Inch and Metric)
• Compact design for field use on construction sites
and maintenance jobs.
• Punches 10 times faster than wrench method.
• Can be used with most standard round Slug-Buster®
and Slug-Splitter SC™ punches (not 1/2", 9/16", 5/8").
• Can be used with non-round punches
(adapter may be required).
• 3-foot hose
Weight
cat no.
upc no. description
lbs. kg.
7646
15906
20
9.1
7306SB
34360
24
10.9
7310SB
34361
54
24.5
7646Pg-SB
32799
24
10.9
38520
38520
48
21.8
7310SB
Driver with Hand Pump, Draw Studs, Spacer and
Plastic Case
Driver, Hand Pump, Slug-Buster® Punches, Dies and
Draw Studs for 1/2” through 2” Conduit, Adapter,
Spacers, Kwik Stepper® Step Bit and Plastic Case
Driver, Hand Pump, Slug-Buster® Punches,Dies and
Draw Studs for 1/2” through 2” and 2-1/2” through 4”
Standard Conduit Size Punches, Dies and Draw Studs, Adapter, Spacers, Kwik Stepper® Step Bit and Plastic
Case
Metric – Driver, Slug-Buster® Pg Punches, Dies and
Draw Studs for 15.2 mm through 60.0 mm, Adapter,
Driver, Hand Pump, Slug-Buster® Punches and Draw
Studs for 1/2” through 3” and 4” Conduit, Adapter,
REQUIRED DRAW STUD
and Accessories
1/2"
3/4"
1"
1-1/4" 1-1/2" 2"
2-1/2" 3"
3-1/2"
4"
3/4" Stud (2113B),
3/8" Stud (20963) & Spacers
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
10 GA. Mild Steel
Ram and Hand Pump Hydraulic Driver Parts Identification
BB
F
F
H
H
G
G
L
L
KK JJ
AA
I
R
R
M
M
N
N
TRUSTED
68
SINCE
1862
KEY
CAT. NO.
upc no.
A
B
F
G
H
I
J
K
L
M
N
R
746
2113B
1557AA
20963
15908
1924AA
1925AA
1926AA
34410
767
06302
30206
17091
10109
03170
20963
USA
03248
03249
06904
13284
06302
PHONE 800.435.0786
FAX 800.451.2632
description
Ram (includes Item B)
Draw Stud–3/4” x 5 3/8”
Punch Sleeve
Draw Stud–3/8” x 4.8”
Spacer Group (includes Items I, J and K)
Spacer-Short
Spacer-Medium
Spacer-Long
Kwik Stepper® Step Bit 1/2”
Hydraulic Hand Pump
High Pressure Hose–1/4” x 3’
Plastic Case
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
Slug-Buster® Ram and Hand Pump Kits Parts List
HOLE SIZE
DRAW STUDS AND MISC.
PUNCHES AND DIES
CAT NO.
UPC NO.
CONDUIT
& PIPE
ø INch
SIZE
DESCRIPTION
KIT CAT./UPC NO.
ACTUAL
7646/
15906
7306SB/
34360
7310SB/ 7646PGSB/
34361
32799
38520
721-1/2
31756
1/2"
7/8
0.885
ø MM
22.5
14722
14722
1/2"
7/8
0.885
22.5
721-3/4
31757
3/4"
—
1.115
28.3
1
1
1
124AV
06972
3/4"
—
1.115
28.3
1
1
1
721-1
31758
1"
—
1.362
34.6
1
1
1
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
1
1
1
721-1-1/4
31759
1-1/4"
1-11/16
1.701
43.2
1
1
1
128AV
04013
1-1/4"
1-11/16
1.701
43.2
1
1
1
721-1-1/2
31760
1-1/2"
1-15/16
1.951
49.6
1
1
1
440AV
04061
1-1/2"
1-15/16
1.951
49.6
1
1
1
721-2
31761
2"
2-3/8
2.416
61.5
1
1
1
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
1
1
1
1429AV
04175
2-1/2"
2-7/8
2.914
74.0
1
1
1430AV
04177
2-1/2"
2-7/8
2.914
74.0
1
1
1431AV
04180
3"
3-1/2
3.539
89.9
1
1
1432AV
04183
3" Conduit Size Die
3"
3-1/2
3.539
89.9
1
1
2982AV
04653
3-1/2"
4
4.044
102.7
1
2981AV
04652
3-1/2"
4
4.044
102.7
1
2984AV
04655
4"
4-1/2
4.544
115.4
1
2983AV
04654
4" Conduit Size Die
4"
4-1/2
4.544
115.4
1
31969
31969
Pg-9 Slug-Buster® Punch
—
—
0.598
15.2
32002
32002
Pg-9 Die
—
—
0.598
15.2
1
31970
31970
—
—
0.732
18.6
1
32003
32003
Pg-11 Die
—
—
0.732
18.6
1
31971
31971
—
—
0.803
20.4
1
32004
32004
Pg-13 Die
—
—
0.803
20.4
1
31973
31973
3/4"
—
1.115
28.3
1
32006
32006
Pg-21 Die
3/4"
—
1.115
28.3
1
36284
36284
Slug-Buster® Punch
—
1-7/32
1.210
30.5
1
36279
36279
Die
—
1-7/32
1.210
30.5
1
31975
31975
—
—
1.457
37.0
1
32008
32008
Pg-29 Die
—
—
1.457
37.0
1
31976
31976
—
—
1.850
47.0
1
32009
32009
Pg-36 Die
—
—
1.850
47.0
1
31978
31978
Pg-48 Slug-Buster Punch
—
—
2.362
60.0
1
32011
32011
Pg-48 Die
—
—
2.362
60.0
746
17091
Ram (includes following item)
1
1
1
1
1
2113B
10109
Draw Stud–3/4" x 5 3/8"
1
1
1
1
1
1557AA
03170
Punch Sleeve
1
1
1
1
1
20963
20963
Draw stud–3/8" x 4.8"
1
1
1
1
1
15908
15908
Spacer Group (includes 1 ea. of following 3 items)
1
1
1
1
1
1924AA
03248
Spacer-Short
1
1
1
1
1
1925AA
03249
Spacer-Medium
1
1
1
1
1
1926AA
06904
Spacer-Long
1
1
1
1
1
34410
34410
Kwik Stepper® Step Bit 1/2"
1
1
1
1
1
767
13284
Hydraulic Hand Pump
1
1
1
1
1
06302
06302
High Pressure Hose – 1/4" x 3'
1
1
1
30206
30206
Plastic Case
1
1
18402
25094
18402
25094
Steel case
Tray
USA
PHONE 800.435.0786
FAX 800.451.2632
®
CANADA
1
1
1
1
1
1
1
1
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
1
1
1
1
1
1
1
PHONE 866.384.8813
FAX 800.524.2853
1
1
www.greenlee.com
69
Knockouts
Slug-Buster® Ram and Foot Pump Hydraulic Driver Kits
7625
• Foot operation frees both hands to position punch.
• Can be used with most standard round, Slug-Buster®
and Slug-Splitter SC™ punch sizes. (Not 1/2", 9/16" 5/8")
• Can be used with non-round punches (adapter may be required).
Weight
cat no.
upc no. description
lbs. kg.
7625
25097
Driver, Foot Pump, Steel Case
37
17
7606SB
07173
42
19
7610SB
07174
Driver, Foot Pump, Slug-Buster® Punches, Dies and
Draw Studs for 1/2” through 2” Conduit, Steel Case
Driver, Foot Pump, Slug-Buster® Punches, Dies
& Draw Studs for 1/2” through 2” Conduit, SlugBuster® Punches and 2 1/2” through 4” Conduit
Standard Round Punches
60
27
REQUIRED DRAW STUD
and Accessories
Standard
1/2"
2-1/2" 3"
3/4"
1"
1-1/4" 1-1/2" 2"
Slug-Splitter SC™
3-1/2" 4"
1/2"
3/4"
1"
1-1/4" 1-1/2" 2"
3/4" Stud (2113B),
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
7/16" Stud (29451)
3/4" Stud (29452)
10 GA. Mild Steel
10 GA. Stainless Steel
TRUSTED
70
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
PUNCHES AND DIES
Ram and Foot Pump Kits Parts List
DESCRIPTION
HOLE SIZE
CONDUIT &
ACTUAL
KIT CAT./UPC NO.
7625/
7606SB/
7610SB/
CAT NO.
UPC NO.
721-1/2
31756
PIPE SIZE
1/2"
ø INch
7/8
0.885
ø MM
22.5
14722
14722
1/2"
7/8
0.885
721-3/4
31757
3/4"
—
1.115
124AV
06972
3/4"
—
1.115
721-1
31758
1"
—
1.362
34.6
1
1
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
1
1
721-1-1/4
31759
1-1/4"
1-11/16
1.701
43.2
1
1
128AV
04013
1-1/4"
1-11/16
1.701
43.2
1
1
721-1-1/2
31760
1-1/2"
1-15/16
1.951
49.6
1
1
440AV
04061
1-1/2"
1-15/16
1.951
49.6
1
1
721-2
31761
2"
2-3/8
2.416
61.5
1
1
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
1
1
1429AV
04175
2-1/2"
2-7/8
2.914
74.0
1
1430AV
04177
2-1/2"
2-7/8
2.914
74.0
1
1431AV
04180
3"
3-1/2
3.539
89.9
1
1432AV
04183
3" Conduit Size Die
3"
3-1/2
3.539
89.9
1
2982AV
04653
3-1/2"
4
4.044
102.7
1
2981AV
04652
3-1/2"
4
4.044
102.7
1
2984AV
04655
4"
4-1/2
4.544
115.4
1
2983AV
04654
4" Conduit Size Die
4"
4-1/2
4.544
115.4
746
17091
(A) Ram (includes 1 ea. of items B, C, and D)
1
1
1
2113B
10109
(B) Draw Stud–3/4" x 5 3/8"
1
1
1
54167
54167
(C) Female Coupler–1/4"
1
1
1
54168
54168
(D) Dust Plug
1
1
1
1557AA
03170
(F) Punch Sleeve
1
1
1
20963
20963
(G) Draw stud–3/8" x 4.8"
1
1
1
15908
15908
(H) Spacer Group (includes 1 ea. of items I, J, and K)
1
1
1
1924AA
03248
(I) Spacer-Short
1
1
1
1925AA
03249
(J) Spacer-Medium
1
1
1
1926AA
06904
(K) Spacer-Long
1
1
1
34410
34410
(L) Kwik Stepper® Step Bit 1/2"
1
1
1
1725
31353
(S) Hydraulic Foot Pump (includes 1 ea. – 54167 female coupler and 54168 dust plug)
1
1
1
37729
37729
1
1
1
54169
54169
(T) High Pressure Hose Unit – 1/4" x 10'; filled with hydraulic oil;
(includes the following 2 items)
Couplers
2
2
2
54170
54170
Dust Caps
2
2
2
23955
23955
(U) Steel case
1
1
1
25094
25094
Tray
1
1
1
25097
07173
1
07174
1
22.5
1
1
28.3
1
1
28.3
1
1
1
Ram and Foot Pump Hydraulic Driver Parts Identification
(Match letters above to drawing.)
U
T
S
A
F
C
C
B
D
D
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
H
G
L
www.greenlee.com
71
Knockouts
Quick Draw® Hydraulic Punch Driver and Kits
The Quick Draw®, Quick Draw 90®, and Quick Draw® Flex feature:
• Compact, lightweight design for portability and fast, easy
one-person operation.
• Develops 8 tons of hydraulic force for easy punching, even in
10-gauge stainless steel, depending on individual punch capacities.
• Quick Draw® is perfect for fast, straight-on front panel punching.
• Quick Draw 90®’s right angle driver head rotates over 180 degrees
for maximum flexibility in tight working areas.
• Quick Draw® Flex allows unlimited driver orientation to simplify
access to work area.
• Can be used with non-round punches within the capacity of the tool
• U.S. Patent #6,772,521.
7706SB
Flex Driver Kit
weight
Cat. No.
7806SB
Quick Draw® Kit
7906SB
Quick Draw 90® Kit
UPC No. Description
7704SB
10475
7706SB
10476
7804SB
34292
7806SB
34293
7804E
34291
7804ESB
35611
7804ISO
35614
7904SB
33794
7906SB
34300
7904E
34299
7904ESB
35615
7904ISO
35616
34983
34983
Quick Draw® Flex Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
Standard – Quick Draw® Flex Driver, 1/2” through
2” Slug-Buster® Conduit Size Punches and Dies, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
Quick Draw® Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
Standard – Quick Draw® Driver, 1/2” through 2”
Slug-Buster® Conduit Size Punches and Dies 2
Metric – Quick Draw® Driver, 2 Draw Studs, 1
Adapter, 1 Spacer and Case
Metric – Quick Draw® Driver, Slug-Buster® Pg
Punches and Dies 15.2 mm through 30.5 mm, 2
Metric – Quick Draw® Driver, Slug-Buster® ISO
Quick Draw 90® Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
Quick Draw 90® Driver, 1/2” through 2” SlugBuster® Conduit Size Punches and Dies, Draw
Studs, 1 Adapter, 1 Spacer and Case
Metric – Quick Draw 90® Driver, 2 Draw Studs, 1
Adapter, 1 Spacer and Case
Metric – Quick Draw 90® Driver, Slug-Buster® Pg
Metric – Quick Draw 90® Driver, Slug-Buster® ISO
Plastic Case
lbs.
kg.
12.1
5.5
17.3
7.9
10
4.5
14
6.4
9.4
4.3
10.3
4.7
11.4
5.2
10
4.5
14
6.4
11
5.0
11
5.0
12.2
5.5
REQUIRED
DRAW STUD AND
Accessories
1/2"
3/4"
1-7/32"
OILTIGHT
Slug-Splitter SC™
1"
1-1/4"
1-1/2"
2"
1/2"
3/4"
1-7/32"
OILTIGHT
1-1/4"
3/8" Draw Stud
Spacer & 7/16" Draw Stud
Spacer & 3/4" Draw Stud
3/4" Draw Stud
10 GA. Mild Steel
10 GA. Stainless Steel
TRUSTED
72
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Parts List for Quick Draw®, Quick Draw 90® and Quick Draw® Flex Kits
HOLE SIZE
CAT
UPC NO.
PUNCHES AND DIES
NO.
721-1/2
31756
14722
14722
721-3/4
31757
124AV
06972
721-1
31758
126AV
04011
721-1-1/4
31759
128AV
04013
KIT CAT./UPC NO.
CONDUIT
& PIPE
SIZE
ø INch
1/2" Conduit Size
Slug-Buster® Punch
3/4" Conduit Size
Slug-Buster® Punch
1/2"
7/8
0.885
22.5
✓
✓
✓
✓
✓
1/2"
3/4"
7/8
—
0.885
1.115
22.5
28.3
✓
✓
✓
✓
✓
✓
✓
✓
3/4"
—
1.115
28.3
✓
✓
✓
1" Conduit Size
Slug-Buster® Punch
1" Conduit Size Die
1"
—
1.362
34.6
✓
✓
✓
1"
—
1.362
34.6
✓
✓
✓
1-1/4" Conduit Size SlugBuster® Punch
1-1/4"
1-11/16
1.701
43.2
✓
✓
✓
1-1/4"
1-11/16
1.701
43.2
✓
✓
✓
1-1/2"
1-15/16
1.951
49.6
✓
✓
✓
DESCRIPTION
ACTUAL
ø MM
7704SB/ 7706SB/ 7804E/ 7804ESB/ 7804ISO/ 7804SB/ 7806SB/ 7904E/ 7904ESB/ 7904ISO/ 7904SB/ 7906SB/
10475 10476 34291 35611 35614 34292 34293 34299 35615 35616 33794 34300
721-1-1/2
31760
1-1/2" Conduit Size SlugBuster® Punch
440AV
04061
1-1/2"
1-15/16
1.951
49.6
✓
✓
✓
2"
2-3/8
2.416
61.5
✓
✓
✓
✓
721-2
31761
442AV
04063
2" Conduit Size
Slug-Buster® Punch
2" Conduit Size Die
2"
2-3/8
2.416
61.5
31696
31696
—
—
0.598
74.0
✓
✓
32002
32002
Pg-9 Die
—
—
0.598
74.0
✓
✓
31970
31970
—
—
0.732
89.9
✓
✓
32003
32003
Pg-11 Die
—
—
0.732
89.9
✓
31971
31971
—
—
0.803
102.7
✓
✓
✓
✓
32004
32004
Pg-13 Die
—
—
0.803
102.7
✓
✓
✓
✓
31973
31973
3/4"
—
1.115
115.4
✓
✓
32006
32006
Pg-21 Die
3/4"
—
1.115
115.4
✓
✓
30.5 mm
Slug-Buster® Punch
30.5 mm Die
—
1-7/32
1.210
30.5
✓
✓
—
1-7/32
1.210
30.5
✓
ISO-16
Slug-Buster® Punch
ISO-16 Die
—
—
0.638
16.2
✓
—
—
0.638
16.2
✓
ISO-25
Slug-Buster® Punch
ISO-25 Die
—
1
1.000
25.4
✓
—
1
1.000
25.4
✓
ISO-32
Slug-Buster® Punch
ISO-32 Die
—
—
1.280
32.5
✓
—
—
1.280
32.5
✓
ISO-40
Slug-Buster® Punch
ISO-40 Die
—
—
1.595
40.5
✓
—
—
1.595
40.5
36284
36284
36279
36279
35163
35163
35162
35162
35165
35165
35164
35164
35169
35169
35168
35168
35158
35158
35159
35159
✓
✓
✓
✓
✓
✓
✓
✓
✓
10383
10383
Quick Draw® Hydrualic Punch
Driver
Quick Draw 90® Hydrualic
Punch Driver
Quick Draw® Flex Driver
✓
✓
1614SS
30043
Draw Stud - 3/8" x 2-13/16"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
31872
Draw Stud - 3/4" x 4-1/8"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
03248
Spacer - Short
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
33967
Stud Adapter - 3/8"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
35202
35202
Plastic Case
✓
✓
✓
✓
✓
✓
34983
34983
Plastic Case
✓
✓
✓
✓
10391
10391
Plastic Case
34288
34288
33796
33796
31872
1924AA
33967
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Optional Accessories for 7806SB, 7804E, 7804ESB, 7804ISO, 7906SB, 7904E, 7904ESB and 7904ISO Kits (not included in kits)
Cat. No.
29451
USA
UPC No. Description
29451
PHONE 800.435.0786
FAX 800.451.2632
7/16" (11.1 mm) Stainless Steel Draw Stud
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
73
Knockouts
SLUG-BUSTER® KNOCKOUT KITS
Slug-Buster® Ratchet Punch Driver Kits
• Time-saving ball bearing head punches faster than wrench method.
• Requires less than half the force of conventional ratchet drivers.
• Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Standard
and Slug-Buster® punches; and 16 gauge (1.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ punches.
• Ratchet action allows for use in confined areas.
• Unique design eliminates stud rotation during punching – lowers the strain
on studs.
• Steel carrying case.
1904
weight
cat no.
upc no. description
lbs.
kg.
1904
30216
Basic High Leverage Ratchet Driver with Three
Draw Studs and Case
14
6.4
1906SB
34357
High Leverage Ratchet Driver with 1/2”
through 2” Slug-Buster® Conduit Size Punches,
Dies, Draw Studs and Case
20
9.1
Hole Size
Kit Cat./UPC No.
CONDUIT
& PIPE
PUNCHES AND DIES
Cat. No.
UPC No.
Description
Size
1904/
1906SB/
MIld Steel
30216
34357
721-1/2
31756
1/2"
Ø inch
7/8
14722
14722
1/2"
7/8
0.885
22.5
10
3.5
✓
721-3/4
31757
3/4"
—
1.115
28.3
10
3.5
✓
124AV
06972
3/4"
—
1.115
28.3
10
3.5
✓
721-1
31758
1"
—
1.362
34.6
10
3.5
✓
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
10
3.5
✓
721-1-1/4
31759
1-1/4"
1-11/16
1.701
43.2
10
3.5
✓
128AV
04013
1-1/4"
1-11/16
1.701
43.2
10
3.5
✓
721-1-1/2
31760
1-1/2" Conduit Size Slug-Buster Punch
1-1/2"
1-15/16
1.951
49.6
10*
3.5
✓
440AV
04061
1-1/2"
1-15/16
1.951
49.6
10*
3.5
✓
721-2
31761
2"
2-3/8
2.416
61.5
10*
3.5
✓
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
10*
3.5
✓
12097
12097
Draw Stud – 3/8" x 3-1/2"
✓
✓
12099
12099
Draw Stud – 3/4" x 4-3/4"
✓
✓
30227
30227
Draw Stud – 7/16" x 3-5/8"
✓
✓
30228
30228
Steel Case
✓
✓
20495
20495
Ratchet wrench only
✓
✓
30225
30225
Handle
✓
✓
®
TRUSTED
74
Actual
CAPACITY
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
0.885
Ø MM GA
22.5
10
MM
3.5
✓
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Slug-Buster® Knockout Kit with Ratchet Wrench
• 1" Hex Ratchet Wrench allows use with both 3/8" 
(9.5 mm) and 3/4" (19.1 mm) draw studs.
• High-impact, rugged plastic carrying case.
Capacity
Mild Steel Weight
cat no.
7238SB
upc no. description
34757
1/2” – 2” Conduit Size
Slug-Buster® Knockout Punch Kit
ga
mm
lbs.
kg.
10
3.5
10
4.54
7238SB/34757 Slug-Buster® Knockout Punch Kit Includes
hole size actual
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
cat no.
upc no. description
34941
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
00042
34941
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
00042
304AVBB
04042
34758
34758
PHONE +1.815.397.7070
FAX +1.815.397.9247
Ratchet wrench – 1” Hex
1/2” Conduit Size Punch
1/2” Conduit Size Die14722
3/4” Conduit Size Die
1” Conduit Size Punch
1” Conduit Size Die
1-1/4” Conduit Size Punch
1-1/4” Conduit Size Die
Ball Bearing Draw Stud
with 1” Hex Head–3/8” x
1-5/8”
Ball Bearing Draw Stud–3/4” x
2-15/16”
Plastic Case
ø inch
ø mm.
7/8
7/8
.885
.885
—
—
—
—
—
—
—
—
2-3/8
2-3/8
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
22.5
22.5
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
www.greenlee.com
75
Knockouts
Slug-Buster® Manual Knockout Kits
• Assortment of commonly used Slug-Buster® knockout punches,
packaged to meet the contractor’s needs.
Capacity
Mild steel weight
cat no.
7235BB
upc no.
7235BB
32013
7237BB
32014
description
GA
mm
lbs.
kg.
1/2” - 1-1/4” Conduit Size
Manual Slug-Buster®
Knockout Punch Kit
1-1/2” and 2” Conduit
Size Manual Slug-Buster®
Knockout Punch Kit
10
3.5
2.7
1.2
10
3.5
5.2
2.4
7235BB/32013 Slug-Buster® Knockout Punch Kit Includes
hole size actual
cat no.
upc no.
721-1/2
14722
00042
721-3/4
124AV
721-1
126AV
721–1-1/4
128AV
249AVBB
31880
7237BB
31756
14722
00042
31757
06972
31758
04011
31759
04013
04040
31880
description
ø inch
Draw Stud–3/8” x 1-5/8”
Draw Stud–3/4” x 2-1/8”
Plastic Case
7/8
7/8
.885
.885
22.5
22.5
—
—
—
—
—
—
1.115
1.115
1.362
1.362
1.701
1.701
28.3
28.3
34.6
34.6
43.2
43.2
ø mm
7237BB/32014 Slug-Buster® Knockout Punch Kit Includes
hole size actual
TRUSTED
76
SINCE
1862
cat no.
upc no.
721-1-1/2
440AV
721-2
442AV
304AVBB
32012
31760
04061
31761
04063
04042
32012
USA
PHONE 800.435.0786
FAX 800.451.2632
description
ø inch
Draw Stud–3/4” x 2-15/16”
Plastic Case
—
—
2-3/8
2-3/8
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
ø mm
1.951
1.951
2.416
2.416
49.6
49.6
61.5
61.5
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Slug-Buster® Knockout Kit with Ratchet Wrench - Metric
• 1" (25.4 mm) hex ratchet wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
• 3/8" (9.7 mm) Kwik Stepper® step bit included.
36690
weight
cat no.
upc no.
36690
36690
36691
36691
36692
36692
36693
36693
description
lbs.
kg.
Pg-9 through Pg-21 and 30.5 mm Manual SlugBuster® Metric Knockout Punch Kit
Pg-9 through Pg-48 and 30.5 mm
Manual Slug-Buster® Metric Knockout Punch Kit
ISO-16 through ISO-40 Manual Slug-Buster® Metric
Knockout Punch Kit
ISO-16 through ISO-63 Manual Slug-Buster® Metric
Knockout Punch Kit
4.7
2.1
9
4.1
5.6
2.5
9
4.1
HOLE SIZE
PUNCHES AND DIES
CAT NO.
USA
UPC NO.
KIT CAT./UPC NO.
CAPACITY
MILD STEEL
ACTUAL
DESCRIPTION
IN.
MM
GA
MM
36690
36691
31969
31969
—
0.598
15.2
14
2.0
✓
✓
32002
32002
Pg-9 Die
—
0.598
15.2
14
2.0
✓
✓
31970
31970
—
0.732
18.6
14
2.0
✓
✓
32003
32003
Pg-11 Die
—
0.732
18.6
14
2.0
✓
✓
31971
32004
31971
32004
Pg-13 Die
—
—
0.803
0.803
20.4
20.4
14
14
2.0
2.0
✓
✓
✓
✓
721-1/2
31756
7/8
0.885
22.5
10
3.5
✓
✓
14722
14722
Pg-16 Die
7/8
0.885
22.5
10
3.5
✓
✓
31973
31973
—
1.115
28.3
14
2.0
✓
✓
32006
32006
Pg-21 Die
—
1.115
28.3
14
2.0
✓
✓
36284
36284
30.5 mm Slug-Buster® Punch
1-7/32
1.210
30.5
14
2.0
✓
✓
36279
36279
30.5 mm Die
1-7/32
1.210
30.5
14
2.0
✓
31975
31975
—
1.457
37.0
10
3.5
✓
32008
32008
Pg-29 Die
—
1.457
37.0
10
3.5
✓
31976
31976
—
1.850
47.0
10
3.5
✓
32009
32009
Pg-36 Die
—
1.850
47.0
10
3.5
✓
31978
31978
—
2.362
60.0
10
3.5
✓
32011
32011
Pg-48 Die
—
2.362
60.0
10
3.5
✓
35163
35163
ISO-16 Slug-Buster® Punch
—
0.638
16.2
14
35162
35162
ISO-16 Die
—
0.638
16.2
35165
35165
1
1.000
35164
35164
ISO-25 Die
1
35169
35169
35168
35168
35158
36692
36993
✓
✓
✓
✓
2.0
✓
✓
14
2.0
✓
✓
25.4
14
2.0
✓
✓
1.000
25.4
14
2.0
✓
✓
—
1.280
32.5
10
3.5
✓
✓
ISO-32 Die
—
1.280
32.5
10
3.5
✓
✓
35158
—
1.595
40.5
10
3.5
✓
✓
35159
35159
ISO-40 Die
—
1.595
40.5
10
3.5
✓
35160
35160
2
2.000
50.8
10
3.5
✓
35161
35161
ISO-50 Die
2
2.000
50.8
10
3.5
✓
35167
35167
2-1/2
2.500
63.5
10
3.5
✓
35166
35166
ISO-63 Die
2-1/2
2.500
63.5
10
3.5
249AVBB
04040
304AVBB
36018
34941
00042
04042
36018
34941
00042
36685
36685
Draw Stud – 3/4" x 2-1/8"
Draw Stud – 3/4" x 2-15/16"
Kwik Stepper® Step Bit 9.7mm
Ratchet Wrench – 1" Hex
Ball Bearing Drive Nut with
1" Hex Head, 3/8" x 3"
Plastic Case
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
✓
✓
✓
✓
PHONE +1.815.397.7070
FAX +1.815.397.9247
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
www.greenlee.com
77
Knockouts
Slug-Buster® Knockout Punch Kits for Ratchet/Hydraulic Drivers
• Packaged in carton for easy insertion into your existing case.
• Replacement punch kits for battery-powered, hydraulic and ratchet drivers.
weight
cat no.
upc no. description
lbs.
kg.
7216
32017
1/2” - 2” Conduit Size Knockout Punch and Die Kit
5.5
2.5
7214E
7215E
32398
32803
Pg-9 through 30.5 mm Slug-Buster® Pg Punch Kit
ISO-16 through ISO-40 Slug-Buster® ISO Punch Kit
1.3
5.1
.6
2.3
35617
35617
ISO-16 through ISO-40 Slug-Buster® ISO Punch Kit
1.6
.7
06892
06892
ISO-16 through ISO-63 Slug-Buster ® ISO Punch Kit
5.5
2.5
HOLE SIZE
CAT NO.
UPC NO.
CONDUIT &
PIPE SIZE
DESCRIPTION
ACUTAL
7216/
32017
7214E/
32398
7215E/
32803
✓
✓
✓
✓
31756
14722
1/2"
1/2"
721-3/4
31757
3/4"
—
1.115
28.3
10
3.5
✓
06972
06972
3/4"
—
1.115
28.3
10
3.5
✓
721-1
31578
1"
—
1.362
34.6
10
3.5
✓
✓
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
10
3.5
✓
✓
721-1-1/4
31759
1-1/4"
—
1.701
43.2
10
3.5
✓
128AV
04013
1-1/4"
—
1.701
43.2
10
3.5
✓
721-1-1/2
31760
1-1/2"
—
1.951
49.6
10
3.5
✓
440AV
04061
1-1/2"
—
1.951
49.6
10
3.5
✓
721-2
31761
2"
2-3/8
2.416
61.5
10
3.5
✓
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
10
3.5
✓
31969
31969
—
—
.598
15.2
14
2.0
✓
32002
32002
Pg-9 Slug-Buster Die
—
—
.598
15.2
14
2.0
✓
✓
31970
31970
—
—
.732
18.6
14
2.0
✓
✓
32003
32003
—
—
.732
18.6
14
2.0
✓
✓
31971
31971
—
—
.803
20.4
14
2.0
✓
✓
✓
✓
32004
32004
—
—
.803
20.4
14
2.0
✓
✓
✓
✓
31973
31973
—
—
1.115
28.3
14
2.0
✓
✓
32006
32006
—
—
1.115
28.3
14
2.0
✓
✓
36284
36284
30.5 mm Punch
—
1-7/32
1.210
30.5
14
3.5
✓
✓
36279
36279
30.5 mm Die
—
1-7/32
1.210
30.5
14
3.5
✓
31975
31975
—
—
1.457
37.0
10
3.5
✓
32008
32008
—
—
1.457
37.0
10
3.5
✓
31976
31976
—
—
1.850
47.0
10
3.5
✓
32009
32009
—
—
1.850
47.0
10
3.5
✓
31978
31978
—
—
2.362
60.0
10
3.5
✓
32011
32011
—
—
2.362
60.0
10
3.5
✓
35163
35163
ISO-16 Punch
—
—
0.638
16.2
14
2.0
✓
✓
35162
35162
ISO-16 Die
—
—
0.638
16.2
14
2.0
✓
✓
35165
35165
ISO-25 Punch
—
1
1.000
25.4
14
2.0
✓
✓
35164
35164
ISO-25 Die
—
1
1.000
25.4
14
2.0
✓
✓
35169
35169
ISO-32 Punch
—
—
1.280
32.5
10
3.5
✓
✓
35169
35169
ISO-32 Die
—
—
1.280
32.5
10
3.5
✓
✓
35158
35158
ISO-40 Punch
—
—
1.595
40.5
10
3.5
✓
✓
35158
35158
ISO-40 Die
—
—
1.595
40.5
10
3.5
✓
35160
35160
ISO-50 Punch
—
2
2.000
50.8
10
3.5
✓
35160
35160
ISO-50 Die
—
2
2.000
50.8
10
3.5
✓
35167
35167
ISO-63 Punch
—
—
2.520
64.0
10
3.5
✓
35167
35167
ISO-63 Die
—
—
2.520
64.0
10
3.5
✓
TRUSTED
SINCE
1862
USA
.885
.885
MM
22.5
22.5
GA
10
10
MM
3.5
3.5
✓
✓
35617 06892
IN.
7/8
7/8
721-1/2
14722
78
KIT CAT./UPC NO.
CAPACITY
MILD STEEL
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
✓
✓
INT’L
✓
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
SLUG-BUSTER® KNOCKOUTS
Slug-Buster® Knockout Punches 0.492" to 2.520"
• The contractor’s choice – worldwide.
• Unique punch profile also splits slugs for easier slug removal.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Uses standard Greenlee dies and draw studs.
• Slug Buster® punches available in sizes up thru 2.52" (64.0 mm).
SPECIFICATIONS
Capacity
Application
Hole Sizes
Unique Slug-Buster®
punch design creases
slug as the punch is
drawn into the die.
Slug is split in half as
punching operation is
completed.
Split slugs fall free from
the die and stud.
Operation
Punch Unit
Replacement Parts
PUNCH UNIT INCLUDES
Punch, Die and Draw Stud
cat no.
Mild steel up through 10 gauge (3.5 mm).
Punch mild steel, aluminum, fiberglass and plastic.
Conduit Sizes- Hole size is outside diameter of US conduit sizes. i.e 1/2" conduit
actually 7/8".
Pg Sizes-European standard pipe sizes.
ISO Sizes- International Standards Organization pipe sizes.
Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or
battery drivers, buy the punch and die only; the draw stud is part of the driver kit.
upc no.
Capacity
Mild Steel
CONDUIT HOLE SIZE
& PIPE Actual
Weight
size
Ø inch
Ø mm
GA.
mm
lbs
g
06727
12356
12357
7211EBB-15.2
35177
12335
7211EBB-18.6
12307
7211EBB-20.4
7211BB-1/2
06727
12356
12357
31989
35177
12335
31990
12307
31991
31962
—
—
—
—
—
—
—
—
—
1/2"
—
1/2
9/16
—
—
11/16
—
3/4
—
7/8
0.492
—
—
0.598
0.638
—
0.732
—
0.803
0.885
12.5
12.7
14.3
15.2
16.2
17.5
18.6
19.1
20.4
22.5
16
16
16
14
14
14
14
14
14
10
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
3.5
0.3
0.15
0.16
0.3
0.3
0.3
0.3
0.4
0.3
0.3
137
69
73.5
137
137
177
137
183
137
137
12338
◊
35178
12341
7211BB-3/4
◊
7211EBB-28.3
60246
36508
12308
35179
12344
12338
◊
35178
12341
31963
◊
31993
60246
36508
12308
35179
12344
—
1/2"
—
—
3/4"
3/4"
—
—
—
—
—
—
15/16
7/8
1
1-1/16
—
—
—
1-7/32
1-7/32
1-1/4
—
1-5/16
—
0.885
1.000
—
1.115
1.115
1.115
1.210
1.210
—
1.280
—
23.8
22.5
25.4
27
28.3
28.3
28.3
30.5
30.5
31.8
32.5
33.4
14
10
14
14
10
10
14
10
14
16
10
16
2.0
3.5
2.0
2.0
3.5
3.5
2.0
3.5
2.0
1.5
3.5
1.5
0.5
—
0.5
0.6
0.8
—
0.5
0.6
0.6
0.7
0.8
0.7
253
—
227
261
363
—
227
273
273
326.5
363
345
7211BB-1
◊
12304
7211EBB-37
12313
35180
31964
◊
12304
31995
12313
35180
1"
1"
—
—
—
—
—
—
1-3/8
—
1-1/2
—
1.362
1.362
—
1.457
—
1.595
34.6
34.6
34.9
37.0
38.1
40.5
10
10
10
10
10
10
3.5
3.5
3.0
3.5
3.0
3.5
1
—
1.1
1.2
1.2
1.2
454
—
507.5
545
559
545
REPLACEMENT
REPLACEMENT PUNCH REPLACEMENT DIE MANUAL DRAW STUD
Cat. No.
UPC No. Cat. No. UPC No. Cat. No.
UPC No.
06728
12360
06728
12360
06729
12358
06729
12358
12359
31969
35163
12337
31970
12306
31971
721-1/2
32002
35162
12336
32003
12305
32004
14722
1675AV
1675AV
1675AV
00042
00042
00042
00042
00042
00042
00042
04218
04218
04218
00042
00042
00042
00042
00042
00042
00042
12359
12361
12361
31969
35163
12337
31970
12306
31971
31756
32002
35162
12336
32003
12305
32004
14722
12340
721-1/2P◊
35165
12343
721-3/4
721-3/4P◊
31973
60237
36284
12309
35169
12346
12340
01980
35165
12343
31757
01981
31973
60237
36284
12309
35169
12346
12339
14722P◊
35164
12342
124AV
124AVP◊
32006
36278
36279
12310
35168
12345
12339
01992
35164
12342
06972
01993
32006
36278
36279
12310
35168
12345
00042
00042P
00042P
00042
249AVBB
249AVBBP◊
00042
249AVBB
00042
00042
249AVBB
00042
00042
06678
06678
00042
04040
01987
00042
04040
00042
00042
04040
00042
721-1
721-1P◊
12303
31975
12312
35158
31758
01982
12303
31975
12312
35158
126AV
126AVP◊
12302
32008
12311
35159
04011
01994
12302
32008
12311
35159
249AVBB
249AVBBP◊
04040
249AVBB
04040
249AVBB
04040
01987
04040
04040
04040
04040
12347
12347
—
1-5/8
—
41.3
10
3.0
1.3
610.25
12349
12349
12348
12348
04040
04040
7211BB-1-1/4
12316
◊
7211EBB-47
12350
7211BB-1-1/2
◊
35181
36171
12351
7211EBB-60
7211BB-2
◊
35182
31965
12316
◊
31996
12350
31966
◊
35181
36171
12351
31998
31967
◊
35182
1-1/4"
—
1-1/4"
—
—
1-1/2"
1-1/2"
—
—
—
—
2"
2"
—
—
1-3/4
—
—
1-7/8
—
—
2
2-1/8
2-1/4
—
2-3/8
2-3/8
—
1.701
—
1.701
1.850
—
1.951
1.951
2.000
2.125
—
2.362
2.416
2.416
2.520
43.2
44.5
43.2
47.0
47.6
49.6
49.6
50.8
54.0
57.2
60.0
61.5
61.5
64.0
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.5
3.0
3.5
3.5
3.0
3.5
3.5
3.5
3.5
3.0
3.5
3.5
3.5
3.5
1.3
1.4
—
1.9
1.8
2.1
—
2.3
2.5
2.9
2.8
3.2
—
3.4
590
661.5
—
862
853.5
953
—
1043
1134
1336
1270
1452
—
1542
721-1-1/4
12315
721-1-1/4P◊
31976
31759
12315
01983
31976
128AV
12314
128AVP◊
32009
04013
12314
01995
32009
12354
12354
12352
12352
721-1-1/2
721-1-1/2P◊
35160
36172
12355
31978
721-2
721-2P◊
35167
31760
01984
35160
36172
12355
31978
31761
01985
35167
440AV
440AVP◊
35161
36173
12353
32011
442AV
442AVP◊
35166
04061
01996
35161
36173
12353
32011
04063
01997
35166
249AVBB
04040
249AVBBP◊
304AVBB
04042
304AVBB
304AVBBP◊
304AVBB
304AVBB
04042
304AVBB
304AVBB
304AVBBP◊
304AVBB
04040
04040
01987
04042
04042
04042
01988
04042
04042
04042
04042
04042
01988
04042
• Individually Packaged in Point of Purchase clamshell for display opportunities
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
79
Knockouts
Slug-Buster SC® (Self-Centering)
• Save time and ensure accuracy! Self-centering punch aligns
itself on pilot hole.
• No need to draw crosshairs or line up die alignment marks.
• Unique punch also splits slugs for easier slug removal.
• US Patent No. 6,973,729
®
Punch unit
cat no.
upc no.
CONDUIT &
pipe size
Hole sizes
inch
mm
WEIGHT OF
punch unit
lbs.
g
77U-1/2*
10801
1/2"
.885
22.2
0.3
137
77U-3/4*
10802
3/4"
1.115
28.3
0.8
363
10807*
77U-1*
10807
10803
1"
1.21
1.362
30.5
34.6
0.9
1
408
454
77U-1-1/4*
10804
1-1/4"
1.701
43.2
1.3
590
77U-1-1/2*
10805
1-1/2"
1.951
49.6
2.1
953
77U-2*
10806
2"
2.416
61.4
2.3
1043
10800
10800
1/2”-2” Kit
-
-
-
-
punch only
cat no.
UPC no.
die only
cat no.
77P-1/2
77P-1/2P*
77P-3/4
77-3/4P*
11357
77P-1
77P-1P*
77P-1-1/4
77P-1-1/4P*
77P-1-1/2
77P-1-1/2P*
77P-2
77P-2P*
-
14722
14722P*
124AV
124AVP*
36278
126AV
126AVP*
128AV
128AVP*
440AV
440AVP*
442AV
442AVP*
-
11361
11261
11362
11262
11357
11363
11263
11364
11264
11365
11265
11366
11266
-
UPC no.
14722
01992
06972
01993
36278
04011
01994
04013
01995
04061
01996
04063
01997
-
stud only
cat no.
upc no.
00042
00042
249AVBB
249AVBBP*
249AVBB
294AVBB
249AVBBP
249AVBB
249AVBBP*
304AVBB
304AVBBP*
304AVBB
304AVBBP*
-
00042
00042
04040
01987
04040
04040
01987
04040
01987
04042
01988
04042
01988
*POP Packaged
10800 Slug-Buster SC Knockout Kit Includes
®
cat no.
77P-1/2
14722
77P-3/4
124AV
77P-1
126AV
77P-1-1/4
128AV
77P-1-1/2
440AV
77P-2
442AV
upc no.
11361
14722
11362
06972
11363
04011
11364
04013
11365
04061
11366
04063
description
Conduit Size
Hole sizes
1/2" Punch Buster, SC
1/2" Die Rd.
3/4" Punch Buster, SC
3/4" Die Rd.
1" Punch Buster, SC
1" Die Rd.
1-1/4" Punch Buster, SC
1-1/4" Die Rd.
1-1/2" Punch Buster, SC
1-1/2" Die Rd.
2" Punch Buster, SC
2" Die Rd.
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2"
.885
.885
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
TRUSTED
80
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
STANDARD Hydraulic KNOCKOUT PUNCH KITS
Standard Round Manual Industrial Punch Kit (continued)
• Compact design for field use on construction sites
and maintenance jobs.
• Can be used with most standard round Slug-Buster®
and Slug-Splitter SC™ punches (not 1/2", 9/16", 5/8").
• Can be used with non-round punches
• 3-foot hose
Weight
cat no.
upc no. description
lbs. kg.
7306
15909
24
10.9
7310
15910
54
24.5
7646Pg
27433
24
10.9
7304
02815
21
9.5
38456
38456
48.4
22
7310SB
Driver, Hand Pump, Standard Punches, Dies and Draw
Studs for 1/2” through 2” Conduit, Plastic Case
Studs and Spacers for 1/2” through 4” Conduit, Plastic
Case
Metric – Driver, Hand Pump, Standard Pg Punches,
Dies and Draw Studs and Spacers for 15.2 mm
through 60.0 mm, Plastic Case
Standard Punch and Die Kit (no draw studs) for 2-1/2”
through 4” Conduit, Plastic Case
Studs and Spacers for 1/2” through 3” and 4” Conduit,
Plastic Case
REQUIRED DRAW STUD
and Accessories
1/2"
3/4"
1"
1-1/4" 1-1/2" 2"
2-1/2" 3"
3-1/2"
4"
3/4" Stud (2113B),
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
10 GA. Mild Steel
Ram and Hand Pump Hydraulic Driver Parts Identification
BB
F
F
H
H
G
G
L
L
KK JJ
I
AA
R
R
M
M
N
N
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
KEY
CAT. NO.
upc no.
A
B
F
G
H
I
J
K
L
M
N
R
746
2113B
1557AA
20963
15908
1924AA
1925AA
1926AA
34410
767
06302
30206
17091
10109
03170
20963
PHONE +1.815.397.7070
FAX +1.815.397.9247
03248
03249
06904
13284
06302
description
Ram (includes Item B)
Draw Stud–3/4” x 5 3/8”
Punch Sleeve
Draw Stud–3/8” x 4.8”
Spacer Group (includes Items I, J and K)
Spacer-Short
Spacer-Medium
Spacer-Long
Kwik Stepper® Step Bit 1/2”
Hydraulic Hand Pump
High Pressure Hose–1/4” x 3’
Plastic Case
www.greenlee.com
81
Knockouts
Ram and Hand Pump Kits Parts List
HOLE SIZE
PUNCHES AND DIES
CAT NO.
CONDUIT
& PIPE
SIZE
UPC NO. DESCRIPTION
7646/
15906
7306/
15909
7310/
15910
7646PG/
27433
38456
721-1/2
31756
1/2"
ø IN
7/8
0.885
ø MM
22.5
14722
14722
1/2"
7/8
0.885
22.5
123AV
04008
3/4"
—
1.115
28.3
1
1
124AV
06972
3/4"
—
1.115
28.3
1
1
1
125AV
04010
1"
—
1.362
34.6
1
1
1
126AV
04011
1" Conduit Size Die
1"
—
1.362
34.6
1
1
1
127AV
06974
1-1/4"
1-11/16
1.701
43.2
1
1
1
128AV
04013
1-1/4"
1-11/16
1.701
43.2
1
1
1
439AV
06978
1-1/2"
1-15/16
1.951
49.6
1
1
1
440AV
04061
1-1/2"
1-15/16
1.951
49.6
1
1
1
441AV
04062
2"
2-3/8
2.416
61.5
1
1
1
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
1
1
1
1429AV
04175
2-1/2"
2-7/8
2.914
74.0
1
1
1430AV
04177
2-1/2"
2-7/8
2.914
74.0
1
1
1431AV
04180
3"
3-1/2
3.539
89.9
1
1
1432AV
04183
3" Conduit Size Die
3"
3-1/2
3.539
89.9
1
1
2982AV
04653
3-1/2"
4
4.044
102.7
1
2981AV
04652
3-1/2"
4
4.044
102.7
1
2984AV
04655
4"
4-1/2
4.544
115.4
1
2983AV
04654
4" Conduit Size Die
4"
4-1/2
4.544
115.4
1
21316
21316
Pg-9 Slug Buster® Punch
—
—
0.598
15.2
1
32002
32002
Pg-9 Die
—
—
0.598
15.2
1
17700
17700
—
—
0.732
18.6
1
32003
32003
Pg-11 Die
—
—
0.732
18.6
1
17697
17697
—
—
0.803
20.4
1
32004
32004
Pg-13 Die
—
—
0.803
20.4
1
36882
36882
3/4"
—
1.115
28.3
1
32006
32006
Pg-21 Die
3/4"
—
1.115
28.3
1
36282
36282
30.5 mm Punch
—
1-7/32
1.210
30.5
1
36279
36279
30.5 mm Die
—
1-7/32
1.210
30.5
1
18331
18331
—
—
1.457
37.0
1
32008
32008
Pg-29 Die
—
—
1.457
37.0
1
17687
17687
—
—
1.850
47.0
1
32009
32009
Pg-36 Die
—
—
1.850
47.0
1
17690
17690
—
—
2.362
60.0
1
32011
32011
Pg-48 Die
—
—
2.362
60.0
1
746
17091
Ram (includes following item)
1
1
1
1
1
2113B
10109
Draw Stud–3/4" x 5 3/8"
1
1
1
1
1
1557AA
03170
Punch Sleeve
1
1
1
1
1
20963
20963
Draw stud–3/8" x 4.8"
1
1
1
1
1
15908
15908
Spacer Group (includes 1 ea. of following 3 items)
1
1
1
1
1
1924AA
03248
Spacer-Short
1
1
1
1
1
1925AA
03249
Spacer-Medium
1
1
1
1
1
1926AA
06904
Spacer-Long
1
1
1
1
1
34410
34410
Kwik Stepper® Step Bit 1/2"
1
1
1
1
1
767
13284
Hydraulic Hand Pump
1
1
1
1
1
06302
06302
High Pressure Hose – 1/4" x 3'
1
1
1
1
30206
30206
Plastic Case
1
1
18402
18402
Steel case
1
1
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
1
1
CANADA
PHONE 866.384.8813
FAX 800.524.2853
1
1
1
1
1
1
TRUSTED
82
KIT CAT./UPC NO.
ACTUAL
INT’L
1
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
STANDARD KNOCKOUT PUNCH KITS
Standard Round Manual Knockout Punch Kits
•Assortment of commonly used round standard knockout punches,
packaged to meet the contractor’s needs.
capacity
mild steel
737BB
weight
cat no. upc no. description
Ga
mm
lbs. kg.
735BB
19973
1/2” - 1-1/4” Conduit Size Knockout
Punch Kit (Manual Round Standard)
10
3.5
2.5
1.1
737BB
19974
1-1/2” - 2” Conduit Size Knockout
10
3.5
4.4
2.0
7304
02815
Standard Punches and Dies (no draw
10
3.5
21
9.5
Punch Kit (Manual Round Standard)
studs) for 2-1/2” through 4”
Conduit, in Plastic Case
735BB/19973 Knockout Punch Kit Includes
Hole size
actual
Wrenches Sold Separately
for kits 737BB, 735BB and 7304BB
735BB
cat no.
upc no. description
ø inch
721-1/2
31756
1/2” Conduit Size Slug-Buster® Punch
7/8
0.885
22.5
14722
14722
7/8
0.885
22.5
00042
123AV
00042
04008
3/8” x 1-9/16” Draw Stud
—
1.115
28.3
124AV
125AV
06972
04010
—
—
1.115
1.362
28.3
34.6
126AV
127AV
04011
06974
—
1-11/16
1.362
1.701
34.6
43.2
128AV
04013
1-11/16
1.701
43.2
249AVBB
04040
3/4” x 2-1/8” Draw Stud
31880
31880
Plastic Case
ø mm.
737BB/19974 Knockout Punch Kit Includes
Hole size
actual
cat no.
upc no. description
ø inch
439AV
06978
1-15/16
1.951
49.6
440AV
04061
1-15/16
1.951
49.6
441AV
442AV
04062
04063
2-3/8
2-3/8
2.416
2.416
61.5
61.5
304AVBB
32012
04042
32012
3/4” x 2-15/16” Draw Stud
Plastic Case
ø mm.
7304/02815 Knockout Punch Kit Includes
Hole size
actual
7304 For 11 Ton
Hydraulic Drivers
cat no.
upc no. description
ø inch
1429AV
04175
2-7/8
2.914
74.0
1430AV
04177
2-7/8
2.914
74.0
1431AV
1432AV
04180
04183
3-1/2
3-1/2
3.539
3.539
89.9
89.9
2982AV
2981AV
04978
04652
4
4
4.044
4.044
102.7
102.7
2984AV
04655
4-1/2
4.544
115.4
2983AV
04654
4-1/2
4.544
115.4
30236
30236
Plastic Case
ø mm.
NOTE: See Standard Round Knockout Punches on pages 86 and 87 for listing of individual punch units, punches, dies and draw studs.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
83
Knockouts
Standard Round Manual Industrial Punch Kit
• Includes most popular sizes for industrial applications.
• Time-saving tool for maintenance, repair and operation applications.
• Convenient steel carrying case.
• Ball bearing drive screw for easy manual operation or use
with ratchet and hydraulic drivers.
SPECIFICATIONS
Capacity
Operation
Wrench Sold Separately
1-1/4" Punch - 16 gauge (1.5 mm) mild steel.
3/4", 1", and 1-1/8" Punches - 14 gauge (2.0 mm) mild steel.
7/8" and 1-1/2" Punches 10 gauge (3.5 mm) mild steel.
Manual - Wrench not included.
cat no.
upc no. description
39860
39860
3/4” - 1-1/2” Hole Size Manual Industrial Punch Kit
39860 MANUAL Industrial Knockout Punch Kit Includes
Hole size
actual
cat no.
description
ø inch
03998
3/4” Punch
3/4
0.750
19.1
114AV
03999
3/4” Die
3/4
0.750
19.1
121AV
14722
04006
14722
7/8” Punch
7/8” Die
7/8
7/8
0.885
0.885
22.5
22.5
87AV
35164
03986
35164
1” Punch
1” Die
1
1
1.000
1.000
25.4
25.4
91AV
03990
1-1/8” Punch
1-1/8
1.125
28.6
92AV
03991
1-1/8” Die
1-1/8
1.125
28.6
117AV
118AV
04002
04003
1-1/4” Punch
1-1/4” Die
1-1/4
1-1/4
1.250
1.250
31.8
31.8
3207AV
04736
1-1/2” Punch
1-1/2
1.500
38.1
3208AV
07044
1-1/2” Die
1-1/2
1.500
38.1
00042
00042
3/8” BB Draw Stud
249AVBB
04040
3/4” BB Draw Stud
19193
19193
Steel Storage Box
113AV
upc no.
ø mm
10 GA. Mild Steel
TRUSTED
84
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Standard Round Manual Knockout Punch Kits - Metric
• 1" (25.4 mm) Hex ratchet wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
• 12.7 mm Kwik Stepper® step bit included.
• Plastic carrying case included.
SPECIFICATIONS
Operation
Manual - Ratchet wrench included
Weight
cat no. upc no. description
lbs.
kg.
36687
36687
8.8
4
36688
36688
5.2
2.3
7309E
32804
8.8
4
36687
Pg-9 through Pg-48 Manual Round Standard
Knockout Punch Kit
ISO-16 through ISO-40 Manual Round Standard
Knockout Punch Kit
Pg-9 through Pg-48 Standard Knockout Pg.
Punch Kit. Replacement Kit Packaged in Carton
Without Plastic Case.
PUNCHES AND DIES
HOLE SIZE
USA
CAT NO.
UPC NO.
21316
31969
32002
17700
32003
17697
32004
121AV
14722
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
35193
35162
87AV
35164
24459
35168
24462
35159
1756AV
35161
1758AV
1757AV
249AVBB
304AVBB
34941
34410
00042
21316
31969
32002
17700
32003
17697
32004
04006
14722
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
35193
35162
03986
35164
24459
35168
24462
35159
04232
35161
04234
04233
04040
04042
34941
34410
00042
36685
36685
PHONE 800.435.0786
FAX 800.451.2632
ACTUAL
DESCRIPTION
Pg-9 Punch
Pg-9 Die
Pg-11 Punch
Pg-11 Die
Pg-13 Punch
Pg-13 Die
Pg-16 Punch
Pg-16 Die
Pg-21 Punch
Pg-21 Die
30.5 mm Punch
30.5 mm Die
Pg-29 Punch
Pg-29 Die
Pg-36 Punch
Pg-36 Die
Pg-48 Punch
Pg-48 Die
ISO-16 Punch
ISO-16 Die
ISO-25 Punch
ISO-25 Die
ISO-32 Punch
ISO-32 Die
ISO-40 Punch
ISO-40 Die
ISO-50 Punch
ISO-50 Die
ISO-63 Punch
ISO-63 Die
Draw Stud - 3/4" x 2-1/8"
Draw Stud - 3/4" x 2-15/16"
Ratchet Wrench -1" Hex
Kwik Stepper Step Bit 1-2" (12.7 mm)
Ball Bearing Draw Stud with 1" Hex
Head, 3/8" x 1-5/8"
Plastic Case
CANADA
PHONE 866.384.8813
FAX 800.524.2853
KIT CAT./UPC NO.
INT’L
ø INch
—
—
—
—
—
—
—
7/8
7/8
—
—
1-7/32
1-7/32
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.885
0.885
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
PHONE +1.815.397.7070
FAX +1.815.397.9247
ø MM
22.5
22.5
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
CAPACITY
MILD STEEL
GA
MM
14
2.0
14
2.0
14
2.0
14
2.0
14
2.0
14
2.0
14
2.0
10
3.5
10
3.5
10
3.5
10
3.5
16
1.5
16
1.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
14
2.0
14
2.0
14
2.0
14
2.0
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
36687
36688
7309E/
32804
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
www.greenlee.com
85
Knockouts
STANDARD KNOCKOUT PUNCHES
Standard Round Knockout Punches 0.5" to 6" Conduit and Pipe
• Round standard metal punch units are complete units consisting
of punch, die and draw stud.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Properly assembled through pilot holes, they will make clean, fast
and accurate holes.
SPECIFICATIONS
Capacity
Application
Hole Sizes
Operation
Ball Bearing
Nut
Bushing
Die
Mild steel up through 10 gauge (3.5 mm).
Punch mild steel, aluminum, fiberglass and plastic.
Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example:
1/2" conduit size punch actually makes a 7/8" hole.
Operate with battery-powered, hydraulic, ratchet or manual drivers. When
used with battery-powered, hydraulic, or ratchet drivers buy the punch and
die only; the draw stud is part of the driver kit.
cat no.
upc no.
3037AV
O4686
description
Bushing for 3-1/2” (conduit hole size) and larger punches with
manual operation
Draw Stud
Punch
Every cut quick and clean
TRUSTED
86
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
Slug falls free in die.
CANADA
PHONE 866.384.8813
FAX 800.524.2853
...Just tip it out.
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Standard Round Knockout Punches
punch unit
Replacement Parts
PUNCH KIT-INCLUDES
Punch, Die & Draw Stud
CAT NO.
UPC NO.
CAPACITY
HOLE SIZE
CONDUIT &
Pipe Size
MILD STEEL WEIGHT
ACTUAL
ø inch
ømm GA
mm
lbs g
REPLACEMENT
punch
cat. no. upc no.
REPLACEMENT
Replacement Die Draw Stud
cat. no.
upc no. cat. no.
REPLACEMENT Ball
Bearing Nut
upc no. Cat.no
upc no.
02408
02433
21115
02409
35192
25340
18886
20667
18887
20668
22563
25341
20670
25342
22564
36910
20671
36506
20673
24476
25344
22565
25427
18890
25428
24477
25349
22566
25350
—
1/2
0.500
12.7
16
1.5
.1
46
1760AV
06996
1759AV
04235
1675AV
04218
—
—
9/16
0.563
14.3
16
1.5
.1
46
1754AV
04230
1753AV
04229
1675AV
04218
—
—
—
—
0.598
15.2
14
2.0
.3
137
21316
21316
32002
32002
00042
00042
—
—
—
5/8
0.625
15.9
16
1.5
.2
91
1742AV
04223
1743AV
04224
1675AV
04218
—
—
—
—
0.638
16.2
14
2.0
.3
137
35193
35193
35162
35162
00042
00042
—
—
—
11/16
0.688
17.5
14
2.0
.3
137
1752AV
04228
1751AV
04227
00042
00042
—
—
—
—
0.732
18.6
14
2.0
.3
137
17700
17700
32003
32003
00042
00042
—
—
—
3/4
0.750
19.1
14
2.0
.3
137
113AV
03998
114AV
03999
00042
00042
—
—
—
—
0.803
20.4
14
2.0
.3
137
17697
17697
32004
32004
00042
00042
—
—
—
13/16
0.812
20.6
14
2.0
.3
137
1745AV
04226
1744AV
04225
00042
00042
—
—
1/2"
7/8
0.885
22.5
10
3.5
.4
182
121AV
04006
14722
14722
00042
00042
—
—
—
15/16
0.937
23.8
14
2.0
.5
227
1762AV
04238
1761AV
04237
00042
00042
—
—
—
1
1.00
25.4
14
2.0
.5
227
87AV
03986
35164
35164
00042
00042
—
—
—
1-1/16
1.063
27.0
14
2.0
.5
227
1763AV
04240
1764AV
04242
00042
00042
—
—
3/4"
—
1.115
28.3
10
3.5
.9
409
123AV
04008
124AV
06972
249AVBB
04040
—
—
3/4"
—
1.115
28.3
14
2.0
.6
273
36882
36882
32006
32006
00042
00042
—
—
—
1-1/8
1.125
28.6
14
2.0
.6
273
91AV
03990
92AV
03991
00042
00042
—
—
—
1-7/32
1.210
30.5
16
1.5
.6
273
36282
36282
36279
36279
00042
00042
—
—
—
1-1/4
1.250
31.8
16
1.5
.7
318
117AV
04002
118AV
04003
00042
00042
—
—
—
—
1.280
32.5
10
3.5
1
454
24459
24459
35168
35168
249AVBB
04040
—
—
—
1-5/16
1.313
33.4
16
3.5
.7
318
1747AV
06587
1746AV
06586
00042
00042
—
—
1"
—
1.362
34.6
10
3.5
1.1
499
125AV
04010
126AV
04011
249AVBB
04040
—
—
—
1-3/8
1.375
34.9
10
3.5
1.1
499
3205AV
04734
3206AV
04735
249AVBB
04040
—
—
—
—
1.457
37.0
10
3.5
1
454
18331
18331
32008
32008
249AVBB
04040
—
—
—
1-1/2
1.500
38.1
10
3.5
1.2
545
3207AV
04736
3208AV
07044
249AVBB
04040
—
—
—
—
1.595
40.5
10
3.5
1.3
590
24462
24462
35159
35159
249AVBB
04040
—
—
—
1-5/8
1.625
41.3
10
3.5
1.4
636
1794AV
04251
1793AV
04250
249AVBB
04040
—
—
1-1/4"
1-11/16
1.701
43.2
10
3.5
1.4
636
127AV
06974
128AV
04013
249AVBB
04040
—
—
—
1-3/4
1.750
44.5
10
3.5
1.5
681
1816AV
04257
1815AV
04256
249AVBB
04040
—
—
—
1.850
47.0
10
3.5
1.7
772
17687
17687
32009
32009
304AVBB
04042
—
—
—
1-7/8
1.875
47.6
10
3.5
1.9
862
1791AV
04248
1792AV
04249
304AVBB
04042
—
—
1-1/2"
1-15/16
1.951
49.6
10
3.5
2
908
439AV
06978
440AV
04061
304AVBB
04042
—
—
—
2
2.000
50.8
10
3.5
1.9
862
1756AV
04232
35161
36173
304AVBB
04042
—
—
—
2-1/8
2.125
54.0
10
3.5
2.2
998
1783AV
04245
36173
04059
304AVBB
04042
—
—
—
2-1/4
2.250
57.2
10
3.5
2.6
1180
437AV
04058
438AV
32011
304AVBB
04042
—
—
—
—
2.362
60.0
10
3.5
2.6
1180
17690
17690
32011
04063
304AVBB
04042
—
—
2"
2-3/8
2.416
61.5
10
3.5
3
1361
441AV
04062
442AV
04233
304AVBB
04042
—
—
2-1/2
2.500
63.5
10
3.5
3
1361
1758AV
04234
1757AV
06997
1434AV
04188
1433AVBB
04187
—
2-5/8
2.625
66.7
10
3.5
5.1
2314
1795AV
04252
1796AV
04246
1434AV
04188
1433AVBB
04187
—
2-3/4
2.750
69.9
10
3.5
4.8
2178
1790AV
04247
1789AV
02443
304AVBB
04042
—
—
—
2.781
70.6
10
3.5
3.8
1724
730101A
02445
730100A
04177
1434AV
04188
1433AVBB
2-1/2"
2-7/8
2.914
74.0
10
3.5
5
2268
1429AV
04175
1430AV
04258
1434AV
04188
1433AVBB
04187
—
3
3.000
76.2
10
3.5
6.1
2767
1821AV
04259
1820AV
06362
1434AV
04188
1433AVBB
04187
—
3-1/8
3.125
79.4
10
3.5
6
2722
1798AV
06363
1797AV
18906
1434AV
04188
1433AVBB
04187
—
—
3.228
82.0
10
3.5
6.3
2858
18905
18905
18906
04183
1434AV
04188
1433AVBB
04187
3"
3-1/2
3.539
89.9
10
3.5
5.9
2677
1431AV
04180
1432AV
05266
1434AV
04188
1433AVBB
04187
730PBB-3-3/4
18891
25351
22567
20676
20678
25360
18892
22568
20679
21214
25361
25383
19975
25372
25403
18635
19976
21216
—
—
3-3/4
3.750
95.3
10
3.5
7.7
3493
4640AV
05265
4641AV
04652
3026AV
04679
3036AVBB
04685
730-1/2
730-9/16
21115
730-5/8
35192
730BB-11/16
730EBB-18.6
730BB-3/4
730EBB - 20.4
730BB-13/16
71BB
730BB-15/16
730BB-1
730BB-1-1/16
72BB
36910
730BB-1-1/8
36506
730BB-1-1/4
24476
730BB-1-5/16
73BB
730BB-1-3/8
730EBB-37
730BB-1-1/2
24477
730BB-1-5/8
74BB
730BB-1-3/4
730EBB-47
730BB-1-7/8
75BB
730BB-2
730BB-2-1/8
730BB-2-1/4
730EBB-60
76BB
730BB-2-1/2
730PBB-2-5/8
730BB-2-3/4
730MBB
738BB
730BB-3
730TBB
730EBB-82
739BB
—
—
—
04187
741BB*
19977
3-1/2""
4
4.011
102.7
10
3.5
10
4536
2982AV
04653
2981AV
04654
3026AV
04679
3036AVBB
04685
742BB*
19978
4"
4-1/2
4.544
115.4
10
3.5
11.4
5172
2984AV
04655
2983AV
04654
3026AV
04679
3036AVBB
04685
730EBB-120*
21519
19980
50005
—
—
4.724
120.0
10
3.5
13
5897
21489
21489
21491
21491
3026AV
04679
3036AVBB
04685
5"
5-5/8
5.675
144.1
10
3.5
19
8619
5135AV
05447
5136AV
05448
3026AV
04679
3036AVBB
04685
6"
6-3/8
6.375
161.9
10
3.5
36
16329 5137AV
50008
5138AV
50006
3026AV
04679
3036AVBB
04685
CANADA
PHONE 866.384.8813
FAX 800.524.2853
743BB*
744BB
USA
PHONE 800.435.0786
FAX 800.451.2632
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
87
Knockouts
SPECIAL APPLICATION PUNCHES
Oiltight Punches with Notches
Other oiltight sizes without notches available in standard, Slug-Buster® and Slug-Splitter® designs.
Counter
Nut
Punch
Die
Draw Stud
Ball Bearing
Drive Nut
cat./upc no
Maximum
Inch
OPTIONAL
PUNCH UNIT
(Includes Punch,
Capacity
Mild Steel OPERATION Die Draw Stud
Hole Size
mm
BB
MINIMUM
ADAPTER FOR
DRAW
DRIVE
COUNTER PILOT HOLE
WEIGHT
HYDRAULIC
A
B
C
A
B
C
GA
mm
Type
and NUTS)
Punch die
stud
nut
nut
inch
mm
LBS. kg.
Drivers
.875
.125
1.000
22.5
3.2
25.4
14
2.0
Hand/Hydr.
60238
60239
60250
60117
60165
60258
.625
15.9
2.1
.95
60167◊
1.210 .190
1.380
30.5
4.8
36.0
10
3.5
Hand/Hydr.
60242
60243
60249
60117
60165
60258
625
15.9
2.7
1.2
60167◊
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
Key Punches
Counter
Nut
Draw Stud
Die
Punch
Ball Bearing
Drive Nut
cat./upc no
Maximum
Inch
OPTIONAL
PUNCH UNIT
Capacity
(Includes Punch,
Mild Steel OPERATION Die, Draw Stud
Hole Size
mm
BB
DRAW
DRIVE
MINIMUM
COUNTER PILOT HOLE
WEIGHT
ADAPTER FOR
HYDRAULIC
A
B
C
A
B
C
GA
mm
Type
and NUTS)
Punch
die
stud
nut
nut
inch mm
LBS. kg.
Drivers
0.481
0.055
.030
12.2
1.4
.8
16
1.5
Hand/Hydr.
60101
60102
60103
60115
60120
05244
.375
9.5
.88
.4
60114◊
1.171
1.265
1.328
0.123
0.156
0.102
.097
.097
.097
29.7
32.1
33.7
3.1
4.0
2.6
2.5
2.5
2.5
14
14
14
2.0
2.0
2.0
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
60104
60107
60110
60105
60108
60111
60106
60109
60112
60166
60166
60166
60165
60165
60165
60258
60258
60258
.875
.875
.875
23.8
23.8
23.8
2.3
2.4
2.4
1.0
1.1
1.1
60167◊
60167◊
60167◊
◊For use with any Greenlee Hydraulic Driver or Battery-Powered Driver. F or maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
720 Keyway Punch
• Eliminates time-consuming hand sawing and filing when making keyways
for push-button switches.
• Use as a nibbler to make wider or deeper keyways.
• Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or
1-7/32" (30.5 mm) push-button holes.
• Canadian Patent No. 1,172,435.
SPECIFICATIONS
Operation
Capacity
cat no.
NOTE: Not for Stainless Steel
Manual
10 gauge (3.5 mm) mild steel
Weight
upc no.
description
lbs. kg.
720
26534
Keyway Punch
2.8
26534
26536
Punch
26538
26538
Die
3/16"
1.27
Cutting Notch
3/16" Key
1/8" Deep
Punch
Die
3/32" Deep
Cutting Notch
1/8" Key
1/8"
1.Locate proper cutting notch on the
cutting head.
2.Place cutting notch inside edge of hole and
cut keyway.
TRUSTED
88
SINCE
1862
USA
3.Withdraw the punch.
PHONE 800.435.0786
FAX 800.451.2632
CANADA
4.Use as a nibbler to make wider or
deeper keyways.
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
“D” Punches
Counter
Nut
cat./upc no
Maximum
Hole Size
Inch
mm
Capacity
Mild Steel OPERATION
PUNCH UNIT
(Includes Punch,
Die, Draw Stud
Punch
Draw Stud
Die
Ball Bearing
Drive Nut
OPTIONAL
BB
DRAW
DRIVE
MINIMUM
COUNTER PILOT HOLE
WEIGHT
ADAPTER FOR
HYDRAULIC
A
B
A
B
GA
mm
Type
and NUTS)
Punch
die
stud
nut
nut
inch mm
LBS. kg.
Drivers
0.500
0.625
0.750
0.469
0.594
0.703
12.7
15.9
19.1
11.9
15.1
19.1
16
14
14
2.0
2.0
2.0
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
60077
61080**
61083**
60078
60079
60115
34421
34421
60120
34733
34733
05244
04638
04638
.375
.500
.500
.9
1.1
1.2
60114◊
33967◊
33967◊
◊ For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
Counter
Nut
.41
.50
.50
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers ** Sold as Unit only
Double “D” Punches
9.5
12.7
12.7
Punch
Die
Ball Bearing
Drive Nut
Draw Stud
cat./upc no
Maximum
Hole Size
Inch
mm
Capacity
Mild Steel
OPERATION
PUNCH UNIT
(Includes Punch,
Die, Draw Stud
OPTIONAL
BB
DRAW
DRIVE
COUNTER
MINIMUM
PILOT HOLE
WEIGHT
ADAPTER FOR
HYDRAULIC
A
B
A
B
GA
mm
Type
and NUTS)
stud
nut
nut
inch mm
LBS. kg.
Drivers
0.769
0.795
0.913
0.913
1.375
0.642
0.697
0.756
0.795
1.125
19.5
20.2
23.2
23.2
34.9
16.3
17.6
19.2
20.2
28.6
14
14
14
14
14
2.0
2.0
2.0
2.0
2.0
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
61086**
61089**
61092**
61095**
60098**
34421
34421
34421
34421
60166
34733
34733
34733
34733
60165
04638
04638
04638
04638
60258
.500
.500
.500
.500
.875
1.1
1.1
1.2
2
2.5
33967◊
33967◊
33967◊
33967◊
60167◊
Square and Special Square Punches
Counter
Nut
Special Square
.50
.50
.54
.9
1.1
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers ** Sold as Unit only
Square
12.7
12.7
12.7
12.7
23.8
Punch
Die
Ball Bearing
Drive Nut
Draw Stud
cat./upc no
Maximum
Hole Size
Inch
mm
Capacity
PUNCH UNIT
(Includes Punch,
Die, Draw Stud
GA
and NUTS)
mm
Type
OPTIONAL
BB
Punch
die
DRAW
DRIVE
MINIMUM
COUNTER PILOT HOLE
stud
nut
nut
inch
mm
WEIGHT
LBS.
kg.
ADAPTER FOR
HYDRAULIC
Drivers
1/2"
0.500 x 0.500
12.7 x 12.7
16
1.5
◊Hand/Hydr.
60001
60002
60003
60115
60120
05244
.375
9.5
1.1
.50
60114◊
5/8"
3/4"
7/8"
0.625 x 0.625
0.750 x 0.750
0.882 x 0.882
0.945 x 0.945
1.000 x 1.000
1.772 x 1.772
1.811 x 1.811
2.000 x 2.000
2.677 x 2.677
3.622 x 3.622
4.125 x 4.125
5.433 x 5.433
15.9 x 15.9
19.1 x 19.1
22.4 x 22.4
24.0 x 24.0
25.4 x 25.4
45.0 x 45.0
46.0 x 46.0
50.8 x 50.8
68.0 x 68.0
92.0 x 92.0
104.8 x 104.8
138.0 x 138.0
14
14
14
14
14
10
10
10
10
10
10
14
2.0
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
3.5
3.5
2.0
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hydr. Only
◊Hydr. Only
◊Hydr. Only
◊Hydr. Only
*Hydr. Only
*Hydr. Only.
*Hydr. Only
61004
61007**
61010**
61013**
60016
60287
60019
60168
60171
60174
60177
60234
60005
60006
60017
60288
60020
60169
60172
60175
60178
60023
60018
60289
60019
60170
60173
60176
60179
60024
34421
34421
34421
34421
60117
60118
60118
60118
60118
60118
60118
60118
34733
34733
34733
34733
60165
—
—
—
—
—
—
—
04638
04638
04638
04638
60258
60235
60235
60235
60235
60235
60235
60235
.500
.500
.500
.500
.625
1.188
1.188
1.188
1.188
1.188
1.188
1.188
12.7
12.7
12.7
12.7
15.9
30.2
30.2
30.2
30.2
30.2
30.2
30.2
1.5
1.5
1.8
2.3
2.4
6.0
6.2
6.9
10.1
14.8
18.8
20
.68
.68
.82
1.0
1.1
2.7
2.8
3.1
4.6
6.7
8.5
9.1
33967◊
33967◊
33967◊
33967◊
60167◊
◊
◊
◊
◊
*
*
*
22.5 Ø(A ) 20.1(B)
14
2.0
Hand/Hydr.
61125**
34733
04638
.500
12.7
.7
.3
33967
1"
1-13/16"
2"
2-11/16"
3-5/8"
4-1/8"
Special Square
0.886(A)
0.791(B)
*For use with with Hand and Foot Pump Hydraulic Drivers with Ram
** Sold as Unit only
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
p For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
34421
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
www.greenlee.com
89
Knockouts
Rectangular Punches
Rectangle
Counter
Nut
Punch
Die
Ball Bearing
Drive Nut
Draw Stud
cat./upc no
Maximum
Hole Size
Capacity
PUNCH UNIT
(Includes Punch,
Die, Draw Stud
OPTIONAL
BB
DRAW
DRIVE
MINIMUM
COUNTER PILOT HOLE
WEIGHT
ADAPTER FOR
HYDRAULIC
Inch
mm
GA
mm
Type
and NUTS)
Punch
die
stud
nut
nut
inch
mm
LBS.
kg.
Drivers
0.437 x 0.875
0.670 x 0.749
0.750 x 1.140
0.750 x 1.310
0.861 x 1.018
0.866 x 1.181
0.866 x 1.654
0.990 x 1.140
1.250 x 1.380
1.312 x 2.625
1.378 x 2.047
1.378 x 2.559
1.378 x 3.228
1.378 x 4.409
1.811 x 3.622
2.250 x 3.500
2.677 x 5.433
11.1 x 22.2
17.0 x 19.0
19.1 x 29.0
19.1 x 33.3
21.9 x 25.9
22.0 x 30.0
22.0 x 42.0
25.1 x 29.0
31.8 x 35.1
33.3 x 67.9
35.0 x 52.0
35.0 x 65.0
35.0 x 82.0
35.0 x 112.0
46.0 x 92.0
57.2 x 88.9
68.0 x 138.0
16
14
14
14
14
14
14
14
14
10
10
10
14
14
10
10
14
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.5
3.5
3.5
2.0
2.0
3.5
3.5
2.0
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
◊Hand/Hydr.
60025
61028
60031
60034
60037
60040
60043
60047
60050
60053
60056
60059
60062
60065
60068
60071
60074
60026
60029
60032
60035
60038
60041
60045
60048
60051
60054
60057
60060
60063
60066
60069
60072
60075
60027
60030
60033
60036
60039
60042
60046
60049
60052
60055
60058
60061
60064
60067
60070
60073
60076
60115
34421
60117
60117
60117
60117
60117
60117
60117
60118
60118
60118
60118
60118
60118
60118
60118
60120
34733
60165
60165
60165
60165
60165
60165
60165
—
—
—
—
—
—
—
—
05244
04638
60258
60258
60258
60258
60258
60258
60258
60235
60235
60235
60235
60235
60235
60235
60235
.375
.500
.625
.625
.625
.625
.625
.625
.625
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
9.5
12.7
15.9
15.9
15.9
15.9
15.9
15.9
15.9
30.2
30.2
30.2
30.2
30.2
30.2
30.2
30.2
1.2
1.5
2.3
2.3
2.3
2.4
2.9
2.6
3.1
5.1
6.1
6.8
7.7
9.2
8.9
10.1
16.1
.5
.68
1.0
1.0
1.0
1.1
1.3
1.2
1.4
2.3
2.8
3.1
3.5
4.2
4.0
4.6
7.3
60114◊
33967◊
60167◊
60167◊
60167◊
60167◊
60167◊
60167◊
60167◊
◊
◊
◊
*
*
*
*
*
* For use with with Hand and Foot Pump Hydraulic Drivers with Ram
Electronic Connector Panel Punches
• Cut-out and mounting slots are punched in one operation.
• Drill only one 7/16" (11.1 mm) pilot hole. 
(See page 104 for Kwik Stepper® step bits.)
• Fast, accurate panel punching with no sawing or filing required.
• Universal size punches for front or back mount of TRW Cinch and
ITT Cannon-type or equivalent connectors in 9, 15, 25, 37 or
50-pin configurations.
SPECIFICATIONS
Capacity
Operation
PUNCH UNIT
CAT. NO.
16 gauge (1.5 mm) mild steel; 10 gauge (3.5 mm) aluminum
Manual with a wrench; Quick Draw® and Quick Draw 90® hydraulic drivers, Battery Driver, Ram and Pump hydraulic drivers aluminum
DIMENSIONS
UPC NO.
NO. OF
PINS
229
34436
9
231
34437
15
RS232
34420
25
234
34429
37
238
34444
50
WEIGHT
A
B
C
.787"
(20.0 mm)
1.127"
(28.6 mm)
1.6555"
(42.0 mm)
2.296"
(58.3 mm)
2.201"
(55.9 mm)
.982"
(24.9 mm)
1.309"
(33.3 mm)
1.853"
(47.1 mm)
2.497"
(58.3 mm)
2.402"
(61.0 mm)
.469"
(11.9 mm)
.469"
(11.9 mm)
.469"
(11.9 mm)
.469"
(11.9 mm)
.579"
(14.7 mm)
DRAW STUD
SQUARE
COUNTER NUT
DRIVE NUT
LBS.
KG
34421
04638
34733
1.4
.64
34421
04638
34733
1.5
.68
34421
04638
34733
2.0
.91
34421
04638
34733
2.0
.91
34421
04638
34733
2.0
.91
TRUSTED
90
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
KNOCKOUT PARTS CABINETS
Knockout Punch Parts Assortment Cabinets
• Includes balanced stock of replacement parts in sturdy steel cabinets.
Cat No.
UPC No.
7360SB
34358
7361SB
34359
Description
Knockout Punch Parts Assortment 1/2" - 2". Includes
Metal Cabinet 14" High, 13" Wide and 14-3/4" Deep, with
4 Drawers.
Knockout Punch Parts Assortment 1/2" - 3". Includes
Metal Cabinet 19-1/2" High, 27" Wide and 15" Deep with
4 Drawers.
7360SB
7361SB/34359 Parts Cabinet Includes
cat no.
7361SB
7360SB/34358 Parts Cabinet Includes
cat no.
upc no. description
QTY.
721-1/2
31756
Slug-Buster® 1/2” Conduit Punch
18
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
00042
249AVBB
304AVBB
12097
20963
2113B
31832
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
00042
04040
04042
12097
20963
10109
31832
1/2” Conduit Die
3/4” Conduit Die
Slug-Buster® 1” Conduit Punch
1” Conduit Die
Slug-Buster® 1-1/4” Conduit Punch
1-1/4” Conduit Die
2” Conduit Die
3/8” Drive Screw
3/4” Drive Screw
3/4” Drive Screw
3/8” Adapter Screw
3/8” Draw Stud
3/4” Draw Stud
Cabinet only
12
6
6
3
3
3
3
2
2
2
1
12
4
4
4
20
4
1
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
1429AV
1430AV
1431AV
1432AV
00042
249AVBB
304AVBB
1434AV
1433AVBB
12097
30227
12099
20963
2113B
1557AA
3037AV
1924AA
1925AA
1926AA
28154
28155
29451
31834
31849
upc no.
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
04175
04177
04180
04183
00042
04040
04042
04188
04187
12097
30227
12099
20963
10109
03170
04686
03248
03249
06904
28154
28155
29451
31834
31849
description
QTY.
Slug-Buster 1/2” Conduit Punch
1/2” Conduit Die
3/4” Conduit Die
1” Conduit Die
2” Conduit Die
2-1/2” Conduit Punch
3” Conduit Punch
3” Conduit Die
3/8” Draw Stud
3/4” Drive Screw
3/4” Drive Screw
5-1/2” x 3/4” Drive Screw
1” Ball Bearing Nut
3/4” Ball Bearing Adapter Screw
3/8” Draw Stud
3/4” Draw Stud
1-1/8” Punch Sleeve
3-1/2”, 4” & 5” Conduit Bushing
Short Spacer
Medium Spacer
Long Spacer
Punch 1/2” HD Slug-Splitter SC™
Die 1/2” HD Slug-Splitter SC™
Draw Stud, 7/16” Stainless Steel
Cabinet A only (top)
Cabinet B only (bottom)
18
12
6
6
6
6
6
6
3
3
3
2
1
1
1
1
12
8
6
1
1
6
2
2
20
6
1
1
4
4
4
1
1
1
1
1
®
www.greenlee.com
91
Knockouts
DRAW
STUDS
FOR
KNOCKOUTS
Replacement Draw Studs for Manual Drivers
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE pictures and information below when ordering a
replacement draw stud.  Sizes given are diameter X length.
1675AV Draw Stud – 1/4" (6.4 mm) x 1-3/8" (35 mm)
00042 – 3/8" (9.5 mm) x 1-5/8" (41 mm)
249AVBB – 3/4" (19.0 mm) x 2-1/8" (54 mm)
3026AV –
1-1/8" (28.6 mm) x 7-1/2" (190 mm)
304AVBB – 3/4" (19.0 mm) x 2-15/16" (75 mm)
TRUSTED
92
1434AV
3/4" (19.0 mm) x
5-1/2" (140 mm)
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Replacement Draw Studs for Hydraulic Drivers
Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. 
Sizes given are diameter X length.
1557AA– 1-1/8" (28.6 mm) x 3" (76 mm)
60114 (Adapter) – 3/4" (19 mm) x 1/4" (6.35 mm) internal
1614SS– 3/8" (9.5 mm) x 2-13/16" (71 mm)
2113B – 3/4" (19.0 mm)
x 5.38" (137 mm)
20963 – 3/8" (9.5 mm)
to 3/4" (19.0 mm)
x 4.8" (122 mm)
7212SP11 – 3/4" (19 mm) 7212SP12 *– 3/4" (19 mm)
x 5.63" (143 mm)
x 4.77" (121 mm)
*For use with 746 Hydraulic RAM
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
93
Knockouts
Replacement Draw Studs for Hydraulic Drivers (continued)
31872 – 3/4" (19 mm) x 4-1/2" (114.3 mm)
29451 – 7/16" (11.1 mm) x 4-1/4" (108 mm)
29452 – 3/4" (19.0 mm) x 5-1/2" (140 mm)
Replacement Draw Studs for Ratchet Drivers
Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. 
Sizes given are diameter X length.
12099 – 3/4" (19.0 mm) x 4-3/4" (121 mm)
30227 – 7/16" (11.1 mm) x 3-5/8" (92 mm)
12097 – 3/8" (9.5 mm) x 3-1/2" (89 mm)
TRUSTED
94
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Replacement Draw Studs for Special Shape Punches
Refer to the ACTUAL SIZE pictures and information below when ordering
a replacement draw stud. Sizes given are diameter X length.
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
60166 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
60117 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
34421 – 3/8" (9.5 mm) x 3-1/2" (88.9 mm)
60115 – 1/4" (6.3 mm) x 3-7/16" (87.3 mm)
60116 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
60118 – 3/4" (19 mm)
x 6-3/4" (171.5 mm)
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
95
Knockouts
STUD PUNCHES
ESP710L Stud Punch
• This tool punches 1-11/32" (34.1 mm) diameter holes in 16 and 18 gauge
structural studs.
• Has the ability to punch holes in under 5 seconds
• The ESP710L can take both time and hard work out of the stud punching
process.
• 4" Throat Depth from center of punch.
Cat. No.
UPC No.
ESP710L11
52165
Description
Punch, Stud Bat 120V Charger
BATTERY-POWERED STUD PUNCH
Cat. No.
ESP710L11
UPC No.
52165
actual hole size
Weight
length
height
IN.
mm
LBS.
kg
IN.
mm
IN.
mm
GA
capacity
mm
BATTERY
CHARGER
1-11/32
34.1
9.2
4.2
15
381
11-3/4
298
16
1.5
3.0Ah 18V, Li-Ion
120 Volt
Plumber Stud Punch
• Punches 2-5/8" (66.7 mm) diameter hole in metal studs for
professional-looking installation of 2" water, vent, waste pipes.
• Two-speed lever action for fast, easy punching of 24 to 20 gauge thick
metal studs.
• 2-1/8" (54 mm) throat width fits over most studs and channels.
• High strength alloy aluminum c-frame and handle provides lightweight
tool for easy handling–10.6 lb. (4.8 kg).
• Lever action punch retraction strips punch out of metal stud fast and easy.
Patent #6,647,630
SPECIFICATIONS
Actual Hole Size
Weight
Length
Height
Capacity
Cat. No.
713
08377
08379
08375
55316
TRUSTED
96
SINCE
1862
USA
2-5/8" (66.7 mm)
10.6 lbs. (4.8 kg)
23-1/2" (596 mm)
9-3/4" (247 mm)
24-20 GA (0.9 mm)
UPC No.
06430
08377
08379
08375
55316
PHONE 800.435.0786
FAX 800.451.2632
Description
Plumber Stud Punch
Punch for 713
Die for 713
Link
Pin, Groove .31 x 1.75
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Metal Stud Punches
• Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
• Aluminum head provides strength with minimum weight,
reducing operator fatigue.
• Contoured handle design gives better operator leverage and makes
it possible to punch in tight places.
• Self-stripping design eliminates punch hang-ups.
• Automatically centers holes on standard studs.
• Conversion kit available to upgrade early models from
24 gauge to 20 gauge maximum capacity.
Weight
cat no.
SPECIFICATIONS
Capacity
709 - 1-5/8" (41.3 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
710 - 2-1/2" (63.4 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
upc no.
description
lbs. kg.
709
22280
7/8” (22.2 mm) Diameter Stud Punch
7
3.2
710
21285
1-11/32” (34.1 mm) Diameter Stud Punch
7.5
3.5
30968
30968
121AV
22286
24823
21297
06015
36617
05932
21557
04006
22286
24823
21297
06015
36617
05932
21557
Conversion Kit – Upgrades Early Model 709 or
710 from 24 to 20 Gauge Maximum Capacity
Punch for 709
Die for 709
Punch for 710
Die for 710
Pin Kit
Link
Link and Pin Kit (709/710)
Compression Spring
Bushings for Metal Stud Punches
• Triple lock design holds bushing securely.
• Locks securely into metal studs from 24 gauge to 12 gauge
(0.6 mm to 2.5 mm).
• Helps protect wire insulation from sharp edges of metal studs.
• Makes pulling smooth and easy by preventing hang-ups of cable
on raw metal edges.
¨
Weight
cat no.
upc no.
711C
22288
711M
22289
712A100
05927
712A1000
05928
Manual Stud Punch
description
lbs.
kg.
100 Bushings for Hole Punched by 709 for
7/8” (22.2 mm) Diameter Hole
1,000 Bushings for Hole Punched by 709 for
7/8” (22.2 mm) Diameter Hole
100 Bushings for Pre-Punched Hole or
1-11/32” (34.1 mm) Diameter Hole Punched
by 710
1,000 Bushings for Pre-Punched Hole or
1-11/32” (34.1 mm) Diameter Hole Punched
by 710
.5
.23
3.7
1.7
1.4
.64
15.5
7.0
• Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
• Unique patented punch rolls the edge over for smooth installation of
armored cable; cable won’t hang up.
• Contoured handle design gives better operator leverage and makes it
possible to punch in tight places.
• Automatically centers holes on standard studs.
SPECIFICATIONS
Actual Hole Size
Weight
Length
Height
Capacity
USA
cat no.
1-1/4" (31.7 mm)
4.0 lbs. (1.8 kg)
16-3/4" (426 mm)
4-1/2" (247 mm)
24-20 GA (0.9 mm)
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
upc no.
description
724
10415
Manual Stud Punch
10419
10419
Punch for 724
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
97
Knockouts
C-FRAME PUNCHES
1731 & 1732 Portable C-Frame Punch Drivers
1731
1732
Hole Size
Cat. No.
UPC No.
13266
13267
13276
13277
13268
121AV
123AV
125AV
12087
12086
12085
1725
16634
38316
13266
13267
13276
13277
13268
04006
04008
04010
12087
12086
12085
1725
16634
38316
54169
54170
06302
11797
11790
11789
767
755
37729
11289
27335
50642
12079
15631
37614
11903
13814
54169
54170
06302
11797
11790
11789
767
755
37729
11289
27335
50642
12079
15631
37614
11903
13814
Description
IN
C-Frame with Ram
Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)
Punch Adapter - 3/4" Ø x 1" (19.0 mm)
Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)
Punch Adapter - 3/4" Ø x 1" (19.0 mm)
Punch Adapter - 1-1/8" Ø (28.6 mm)
C-Frame 1/2" Conduit Size Die
C-Frame 3/4" Conduit Size Die
C-Frame 1" Conduit Size Die
1725 Hydraulic Foot Pump
Steel Case
High Pressure Hose Unit - 1/4" x 3'
(includes 1 each of the following 3 items)
1/4' Male Coupler
Dust Cap
High Pressure Hose 1/4" x 3'
Die Adapter - 3/8" Ø (9.5 mm)
Die Adapter - 3/4" Ø (19.0 mm)
Die Adapter - 1-1/8" Ø (28.6 mm)
Hydraulic Hand Pump
Hydraulic Hand Pump
Hydraulic Hose - 1/4" x 10' (3 m)
Hydraulic Hose - 3/8" x 6' (9.5 mm x 1.8)
Metal Case
Nut - 3/4" - 10 (19.0 mm)
Frame
Ram
Quick Disconnect
C-Frame
Packing Kit
MM
16
21
—
16
21
—
1862
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
22.5
28.3
34.6
22.5
28.3
34.6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
cat no.
Capacity 1731: Up through 10 gauge (3.0 mm) mild steel with Greenlee
special C-Frame dies and standard punches; 1/2" through 1"
conduit and 15.2 mm through 30.5 mm
1732: Up through 10 gauge (3.0 mm) mild steel with Greenlee Standard
punches and dies; 1/2" through 4" conduit and 15.2 mm through 115.4 mm.
TRUSTED
1732/
27361
✓
✓
✓
SPECIFICATIONS
SINCE
1731F1725/
25169
✓
1/2
3/4
1
1/2
3/4
1
• Fast, one-shot punching, no predrilling of pilot holes.
• Throat measures 8" (203 mm) deep.
1731
• Great for punching junction boxes and small enclosures.
• Punch can be used with ram inside or outside of the junction box.
• For use with 1/2" – 1" (22.5 mm – 34.6 mm) conduit size and
accessory sizes only.
1732
• Use with 1/2" through 4" conduit size and other round sizes only.
• Use with Greenlee standard round punches and dies (optional).
98
PG
Kit Cat./UPC No.
1731/
1731H767/
15911
20486
USA
Weight
lbs. kg.
upc no. description
1731
15911
1732
27361
1731H767
1731F1725
21316
18557
17700
18558
17697
18559
36282
37103
20486
25169
21316
18557
17700
18558
17697
18559
36282
37103
PHONE 800.435.0786
FAX 800.451.2632
Driver with Ram, 1/2” Through 1” Conduit
(22.5 mm through 34.6 mm) Punches and
Dies
Driver with Ram, 3/8”, 3/4” and 1-1/8” Punch
and Die Adapters
Same as 1731 with 767 Hydraulic Hand Pump
Same as 1731 with 1725 Hydraulic Foot Pump
Pg-9 (15.2 mm) Punch (optional)
Pg-9 (15.2 mm) Die (optional)
1-7/32” (30.5 mm) Oil Tight Punch (optional)
1-7/32” (30.5 mm) Oil Tight Die (optional)
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
32
15
59
27
36
43
17
20
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
MANUAL Hydraulic PUMPS
Hydraulic Hand Pump
• Lightweight and portable, for use with Greenlee Punch Drivers.
• Versatile, operates in any position.
• Single speed.
• Rugged steel pump body/reservoir with cast aluminum handle.
• Has mounting holes for easy, permanent mounting.
SPECIFICATIONS
Operation
Capacity
Length
Width
Height
Manual – Hand
6,500 psi (448 bar), .0823 in³ (13 mm³) per stroke
13" (330 mm)
4" (102 mm)
4" (102 mm)
Weight
Cat. No.
UPC No.
767
04343
13800
30242
13284
04343
13800
30242
30241
30241
Description
lbs.
kg
Hydraulic Hand Pump
Seal Kit Repair for Serial Code ABM
*Seal Kit Repair for Serial Code 55D & Up
*Seal Kit Repair for Serial Code 68BG TO
BG33181628, BG331816 & Up
Reservoir Follower
6
2.7
*NOTE: Must also purchase 30241 Follower
NOTE: See page 100 to select the proper hydraulic hose for this pump.
Hydraulic Foot Pump
• Free both hands to position and hold the working tool.
• Foot activated release lever.
• Hold-down pin keeps pedal down for storage and transport.
• Angled base bar keeps the pump upright and stable.
• Includes 1/4" (6.4 mm) female coupler with dust cap.
SPECIFICATIONS
Operation
Capacity
Length
Height
Width
Cat. No.
1725
24496
25214
33336
Manual – Foot
6,500 psi (448 bar), .117 in³ (19 mm³) per stroke
16" (406 mm)
Pedal down 6" (152 mm), Pedal up 12" (305 mm)
8" (203 mm)
UPC No.
31353
24496
25214
33336
Weight
Description
lbs.
kg
Hydraulic Foot Pump
Seal Kit w/ RD Serial Code
Seal Kit w/ RU Serial Code
Seal Kit w/ VK Serial Code
11
5
NOTE: See page 100 to select the proper hydraulic hose for this pump.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
99
Knockouts
Hydraulic PUMP ACCESSORIES
Hydraulic Hose Selection Guide
Tool Cat. No./Description
750 Cable Cutter
750 Cable Cutter
750 Cable Cutter
777 Bender
782 Bender
800 Cable Bender
880 Bender
882 Bender
884 Bender
885 Bender
1731 C-Frame Punch Driver
SDK202GL Cable Cutter
RK06AT, RK06FT
RK1230, RK1240, RK1240K
RCCX
RK1550
Tool Coupler
Pump Cat. No.
Hose Cat./UPC No.
767
1725
975
755, 975, 980 or 960SAPS
755 or 975
1725
755 or 975
755 or 975
980 or 960SAPS
980 or 960SAPS
767
1725
755 or 975
7475H, 975 or 980
7475H, 975 or 980
7475H, 975 or 980
7475H, 975 or 980
7475H, 975 or 980
1/4" Female Coupler
1/4" Female Coupler
1/4" Female Coupler
3/8" Female Coupler
3/8" Female Coupler
1/4" Female Coupler
3/8" Female Coupler
3/8" Female Coupler
3/8" Female Coupler
3/8" Female Coupler
1/4" Female Coupler
1/4" Female Coupler
1/4" Female Coupler
3/8" Male Coupler
3/8" Male Coupler
3/8" Male Coupler
3/8" Male Coupler
3/8" Male Coupler
38316
37729
17707
11289
11289
37729
11289
11289
11289
11289
38316
37729
11289
05850, 05851
05850, 05851
05850, 05851
05850, 05851
05850, 05851
Hydraulic Hose Units
• High pressure hydraulic hose units for use with Greenlee hydraulic pumps.
• Equipped with couplers and dust caps.
Cat. No.
UPC No.
Description
05850*
05850
05851*
05851
11289*
17707*
11289
17707
37729*
38316
37729
38316
06302
06302
10' X 1/4" Hose With (1) 3/8" Male Coupler and (1) 3/8" Female
Coupler
10' X 1/4" Non-Conductive Hose with (1) 3/8" Male C
oupler
and (1) 3/8" Female Coupler
6' X 3/8" Hose with (2) 3/8" Male Couplers
10' X 1/4" Hose with (1) 3/8" Male Coupler and
(1) 1/4" Male Coupler
10' X 1/4" Hose with (2) 1/4" Male Couplers
3' X 1/4" Hose with (1) 1/4" Male Coupler and
(1) 1/4" NPT Swivel Threaded Fitting
3' X 1/4" Hose with (1) 1/4" NPT Male Threaded Fitting
and (1) 1/4" NPT Swivel Threaded Fitting
* Filled with hydraulic oil.
COUPLER SET
Cat./UPC No.
3548GB/
Hose Unit Cat./UPC No.
Cat. No.
UPC No.
54167
54168
54169
54170
4018GB
4033GB
41877
41941
41834
54167
54168
54169
54170
50807
50823
41877
41941
41834
Description
05850
1/4" (6.4 mm) Female Coupler without Dust Cap
1/4" (6.4mm) Dust Cap for Female Coupler
1/4" (6.4 mm) Male Coupler without Dust Cap
1/4" (6.4 mm) Dust Cap for Male Coupler
3/8" (9.6 mm) Female Coupler with Dust Cap
3/8" (9.6 mm) Male Coupler with Dust Cap
3/8" (9.6 mm) Female Coupler without Dust Cap
3/8" (9.6 mm) Male Coupler without Dust Cap
3/8" (9.6 mm) Dust Cap for 41941/41877 Couplers
TRUSTED
100
SINCE
1862
05851
11289
17707
1
1
2
1
1
2
37729
2
2
38316
37614
1
1
1
1
1
1
20573
1
1
1
1
1
2
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247

knockouts

Transcription

Similar documents

Holemaking

KNOCKOUTS

GREENLEE Manual Round Standard Knockout Punch Kits Standard

MA6126 Speed Punch™ Expansion Brochure