instrument quality plastic fittings - Ark-Plas
Transcription
instrument quality plastic fittings - Ark-Plas
Ark-Plas® Products, Inc. Instrument Quality Plastic Fittings From Ark-Plas® Products, Inc. 165 Industry Lane Flippin, Arkansas 72634 PREMIUM GRADE FITTINGS Barbed Tube to Port Fitting Barbed Tee Fitting • Barbed Tube to Port Fittings are manufactured in 100% virgin Clear Polycarbonate, Natural Kynar, Natural Polypropylene, and White Nylon • Barbed Tees are manufactured in Polycarbonate, Kynar, Nylon, and Polypropylene • Available in 1/16”-1/4” sizes • Barb Sizes range from 1/16”-1/4” sizes • Reducing / Enlarging Barbed Tees are also available • Thread sizes range from 1032 UNF - 1/8-27 NPT Barbed Tube to Port Elbow Fitting Hard-Line Barbed Tee Fitting • Premium Grade Hard-Line Tee Connector Fittings are manufactured in Kynar, Polycarbonate, Polypropylene, and White Nylon • Premium Grade Tube to Port Elbow Fittings are manufactured in 100% virgin Clear Polycarbonate, Natural Kynar, Natural Polypropylene, and White Nylon • Barb sizes range from 1/8” - 1/4”sizes • Tube to Port Elbow Fittings are available in 1/4-18 NPT threads • Hard-Line Series Fittings are designed for Semi-Rigid Tubing Barbed “Y” Connector Fitting Barbed Connector Fitting • Premium Grade Barbed Connector Fittings are manufactured in Kynar, Polycarbonate, Polypropylene, and White Nylon • Barbed “Y” Connectors are available in Polycarbonate, Kynar, Polypropylene, and Nylon • Barb sizes range from 1/16”-1/4”sizes • Barbed “Y” Connectors are available in 1/16” - 3/8” sizes • Enlarging/Reducing Barbed Connector Fittings are also available Hard-Line Barbed Connector Fitting Barbed Elbow Fitting • Premium Grade Hard-Line Barbed Connector Fittings are manufactured in Kynar, Polycarbonate, Polypropylene, and White Nylon • Elbow Fittings are manufactured in Clear Polycarbonate, Natural Kynar, Natural Polypropylene, and White Nylon • Barb sizes range from 1/16” - 1/4”sizes • Barb sizes range from 1/16” - 1/4” sizes • Hard-Line Series Fittings are designed for Semi-Rigid Tubing • All Premium Grade Fittings are 100% quality inspected Made In The USA Phone: 870-453-2343 www.ark-plas.com Fax: 870-453-2567 COMMERCIAL GRADE FITTINGS Barbed Tube to Port Fitting Barbed Connector Fitting • Commercial Grade Tube to Port Fittings are manufactured in Nylon, and Polypropylene • Commercial Grade Barbed Connector Fittings are available in 1/16” - 1/2” barb sizes Barb sizes range from 1/16” - 1/2” sizes • Enlarging / Reducing Barbed Connector Fittings are also available • Thread sizes range from 10-32 UNF - 1/2-14 NPT Barbed Tube to Port Elbow Fitting • Nylon parts can be color coded Tee Fitting • Commercial Grade Tube to Port Elbow Fittings are designed with a single sharp barb that will hold up to 125 P.S.I. without the use of clamps or ties • Barbed Tees are manufactured in Nylon and Polypropylene materials • Available in 1/16” - 1/2” sizes • Tube to Port Elbow Fittings are available in 1/16” - 1/4” barb sizes • Reducing / Enlarging and Internally Threaded Tees are available • Available in 10-32UNF 1/2-14 NPT Thread sizes Branch Tee Fitting Threaded Nipple Fitting • Threaded Nipple Fittings are manufactured in Natural Nylon and Natural Polypropylene • Commercial Grade Branch Tee Fittings are designed with 10-32 UNF - 1/8-27 NPT threads • Non-standard materials are available • Barb sizes range from 1/8” - 1/4” • Available in 10-32 UNF thread size Threaded Connector Fitting Threaded Elbow Fitting • Threaded Connectors are manufactured in Natural Nylon and Natural Poypropylene • Available in Reducing and Enlarging styles• • Thread sizes range from 1/8-27 NPT / FNPT - 1/4-28 UNF “Expect Excellence” • Commercial Grade Threaded Elbow Fittings are manufactured in Nylon and Polypropylene • Internally Threaded, Externally Threaded, Enlarging, and Reducing Threaded Elbows are available Ark-Plas® Products, Inc. 165 Industry Lane Flippin, Arkansas 72634 COMMERCIAL GRADE FITTINGS Barbed Elbow Fitting Special Automotive Fitting / Plug • Elbow Fittings are manufactured in Clear Polycarbonate, Natural Kynar, Natural Polypropylene, and Nylon • Commercial Grade Automotive Fittings range from 3/8-24 UNF 9/16-20 UNF thread sizes • 5/32” barb size available • Barb sizes range from 1/16” - 1/2” sizes • Automotive Plugs are available in 3/8-24 UNF - 9/16-20 UNF thread sizes • Reducing / Enlarging and Internally Threaded Elbow Fittings are also available Barbed Cross Connector Fitting Locking Sleeve •Barbed Cross Connector Fittings are available in 1/4” barb size • Commercial Grade Locking Sleeves are manufactured in Nylon and Polypropylene • Manufactured in Nylon and Polylpropylene • 1/8” - 3/8” tubing OD sizes available • Non-standard materials also available • Designed to slide over tubing / barb connection to ensure a leakproof seal Threaded and Barbed Plug Fitting Dome Nut • Dome Nuts are available in 10/32 UNF, 1/4-20 UNC, 1/8-27 FNPT, 1/4-18 FNPT, and 3/8-18 FNPT thread sizes • Threaded and Barbed Plug Fittings are manufactured from Natural Nylon and Natural Polypropylene • Threaded Plugs range from 1/8-27 NPT - 3/4-14 NPT thread sizes • Manufactured in Natural Nylon and can be color coded • Barbed Plugs range from 1/16”-3/8” tubing ID sizes Compression Fitting / Connector / Nut • Non-standard materials also available Polyethylene Plastop • Commercial Grade Barbed Compression Fittings are available in 7/16”-20 UNF thread size with a 1/4” barb • Compression Connector Fittings are available in 7/16-20 UNF and 1/2-20 UNF thread sizes • Compression Nut is also available Made In The USA • Polyethylene Plastops are designed to protect threads from being damaged • Designed with a pull-tab for quick and easy removal • color match available for large volume orders Ark-Plas® Products, Inc. 165 Industry Lane Flippin, Arkansas 72634 QUICK DISCONNECT LUER FITTINGS 1-Way Small Stopcock Fitting Threaded Port Male Slip Luer • Threaded Port Male Slip Luers are available in 10-32 UNF & 1/4-28 UNF thread sizes • Stopcock Fittings are available with a Polycarbonate body and a High-Density Polyethylene Handle or Black Kynar body and handle • Nylon parts can be color coded • Handle rotates 360˚, each 90˚ changes on/off 1-Way Stopcock Fitting • Non-standard materials are available Male / Female Luer Plug • Luer designed to ISO standards • Male / Female Luer Plugs are manufactured in Nylon, Polypropylene, and Polycarbonate • Handle is also available in five basic colors blue, yellow, green, red, and black or may be color coded to match your assembly or process • Several combinations available for shut-off applications Male Luer Fitting 4-Way Stopcock Fitting • 4-Way Stopcock Luers have three ports with a 360˚ rotating handle that will shut off flow when the “off” handle is rotated in line with any port • Available in several combinations to fit your application • Manufactured in Nylon, Polypropylene, and Polycarbonate • The handle may also be rotated to 180˚ from the middle port to allow flow to all three ports Barbed Male Luer Fitting Female Luer Fitting • Barbed Male Luer Fittings are designed with a locking nut, free turning locking nut, and a slip connection • Non-standard materials are available • Manufactured in Nylon, Polypropylene, and Polycarbonate •Luers designed to ISO standards • Female Luer Fittings range in a variety of styles • Bulkhead Mounting, Tees, Threaded Ports, Connectors, and Barbed fittings are available • Coding Rings are also available for all Quick Disconnect Luer Fittings Made In The USA Phone: 870-453-2343 www.ark-plas.com Fax: 870-453-2567 CHECK VALVES & FILTERS Standard,Enlarging,Reducing Check Valves Standard In-Line Filter • Check Valves are manufactured in six material / diaphragm combinations with 1/8”, 3/16”, 1/4”, or 3/8” barbs • In-Line Filters are molded with the same “Premium Grade” technology as our Check Valves and are stocked with 1/8”, 3/16”, 1/4”, and 3/8” barbs • Enlarging / Reducing Check valves are available • Stainless Steel and High-Density Polyethylene filters are available • Designed with a free floating diaphragm Threaded Check Valves • Threaded check valves are manufactured in six material / diaphragm combinations • Barb designed without parting line to ensure a leakproof seal • Designed with a 1/8-27 thread • Barb range in size from 3/16” - 3/8” Duckbill Check Valves Ordering Information For quotations, inquiries, ordering, and assistance, contact our Customer Service Department at (870) 453-2343. Our representatives are available between the hours of 8:00 AM and 5:00 PM, CST. We can also be faxed at (870) 453-2567, or e-mailed at [email protected], 24 hours a day. Our mailing address is: • Duckbill check valves are manufactured with a silicone diaphragm and are available in Kynar, Polycarbonate, Nylon, and Polypropylene body materials • Designed for low PSI application range and are designed to hold check at 0.5 P.S.I. Luer Check Valves • Luer Check valves are manufactured with a silicone diaphragm and a Polycarbonate body Ark-Plas Products, Inc. Customer Service Department 165 Industry Lane Flippin, Arkansas 72634 We accept Visa, Master Card, and American Express as a quick and easy option for payment of your order. Contact Customer Service for more details. Discount terms do not apply to credit card purchases. We urge our customers to take advantage of our free sample offer. Call, fax, or write our customer service department, or visit our web site (www.ark-plas.com) for free samples. We will be pleased to provide samples of any item in our catalog for testing and evaluation. All Nylon parts can be color coded. A charge of $5.00 per color coded line item will be added to the invoice. Color choices are: Black, Blue, Red, Green, Yellow, Orange, and Purple. Color coded parts are non-returnable. • Luer designed to ISO standards for a leakproof seal “Expect Excellence”