USer`S GUide

Transcription

USer`S GUide
User’s Guide
SRX812P
SRX815P
SRX835P
SRX818SP
SRX828SP
2
CONTENTS
Safety Instructions..................................................................................................................................... 4
Declaration Of Conformity.......................................................................................................................... 5
Quick Setup Guide...................................................................................................................................... 6
SRX812P, SRX815P, SRX835P Back Panel.................................................................................................. 8
SRX828SP, SRX818SP Back Panel............................................................................................................ 10
Overview - SRX800 Family....................................................................................................................... 12
SRX812P, SRX815P - Block Diagram........................................................................................................ 13
SRX835P - Block Diagram........................................................................................................................ 14
SRX818SP - Block Diagram...................................................................................................................... 15
SRX828SP - Block Diagram...................................................................................................................... 16
SRX812P Specifications .......................................................................................................................... 17
SRX815P Specifications .......................................................................................................................... 18
SRX835P Specifications .......................................................................................................................... 19
SRX818SP Specifications ........................................................................................................................ 20
SRX828SP Specifications ........................................................................................................................ 21
Purposeful Product Design...................................................................................................................... 22
Component Elements................................................................................................................................ 23
Back Panel LCD......................................................................................................................................... 25
SRX Presets.............................................................................................................................................. 27
Premium DSP Technology........................................................................................................................ 29
Networking............................................................................................................................................... 30
Smart Device App..................................................................................................................................... 32
Loudspeaker Placement and Suspension............................................................................................... 33
TroubleShooting........................................................................................................................................ 34
Warranty Information............................................................................................................................... 35
Contact Information.................................................................................................................................. 36
3
Safety Instructions
Before You Begin - Important Safety Information
Before using your SRX800® speaker system please review the following for important
information on safety and protection of your investment in quality loudspeakers.
1. Read these instructions.
2. Keep these instructions.
3. Follow all instructions.
4. Heed all warnings.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. D
o not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. D
o not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. P rotect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. U se only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. R efer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. C
AUTION - DO NOT PERFORM ANY SERVICING UNLESS YOU ARE QUALIFIED TO DO SO.
16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from
the AC receptacle.
17. WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
18. D
o not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
19. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
4
Declaration Of Conformity
Safety And EMC Compliance Specifications
Report No.
EN 55103-1:2009 +A1:2012
EN 55103-1:2009 +A1:2012
EN 61000-3-2:2006 +A1:2008 +A2:2009
EN 61000-3-3:2013
EN 55022:2010
EN 55103-2:2009
EN 61000-4-2:2008 Ed 2.0
EN 61000-4-3:2010 Ed 3.2
EN 61000-4-4:2007
EN 61000-4-5:2006
EN 61000-4-6:2006
EN 61000-4-11:2004
Safety Standard:
EN60065:2002 +A12:2011, IEC 60065:2001 Ed 7
+A1:2005 +A2:2010
CAN/CSA 60065-03 incl. A1
UL Std No. 60065-2007
Description
EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions
Magnetic Field Emissions – Annex A @ 10cm and 20cm
Limits for Harmonic Current Emissions (equipment input current less than or equal to 16A
Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply systems Rated Current less than
or equal to 16A
Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class A
EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control
Apparatus for Professional Use, Part 2: Immunity
Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge)
Radiated, Radio-Frequency, EMC Immunity (Environment E2, Criteria A)
Electrical Fast Transient/Burst Immunity (Criteria B)
Surge Immunity (Criteria B)
Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)
Voltage Dips, Short Interruptions and Voltage Variation
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
UL Compliance Specifications
UL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC Warning
1. This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate
the equipment.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.”
5
Quick Setup Guide
Congratulations on your purchase of JBL Professional SRX800 Series loudspeakers! We know you are anxious to get up and
running as fast as possible, which is why you are reading this section. The following will help you get set up as soon as possible.
Packaging Contents
Your SRX800 system should include the following:
1 x SRX800 speaker
1 x 10'(3m) IEC Power Cable
1 x Quick Start Guide
Configuration Options
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
CH
IN
OUT
IN
OUT
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
BACK
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
MASTER LEVEL
1
IN
OUT
IN
OUT
BACK
CH
CH
IN
OUT
IN
OUT
BACK
1
1
CH2
CH2
NETWORK
CH2
NETWORK
NETWORK
LINK
LINK
DATA
LINK
DATA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
CH
IN
OUT
IN
OUT
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
BACK
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
MASTER LEVEL
1
IN
OUT
IN
OUT
IN
OUT
IN
OUT
1
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
MASTER LEVEL
CH
IN
OUT
IN
OUT
BACK
1
1
CH2
NETWORK
POWER
BACK
BACK
CH
CH
CH2
CH2
CH2
NETWORK
NETWORK
LINK
NETWORK
LINK
DATA
LINK
DATA
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
1
2
3
4
MAIN MENU
MAIN MENU
? FILTERS
PRESET
? FILTERS
PRESET
ON
AUTO DIM
ON
AUTO DIM
OFF
AUTO SLEEP
OFF
AUTO POWER
SLEEP
METERS
METERS
POWER
OUT
CH
1
IN
BACKOUT
IN
OUT
NETWORK
6
MASTER LEVEL
MASTER LEVEL
IN
CH
5
BACK
1
CH2
CH2
IN
OUT
NETWORK
LINK
LINK
DATA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
-- Standing (SRX812P,
SRX815P,
SRX835P)
-- Standing
(SRX812P,
SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P)
-- Monitor (SRX812P,
SRX815P)
-- Monitor (SRX812P, SRX815P)
-- Monitor
(SRX812P, SRX815P)
-- Pole Mounted (SRX12P,
SRX815P,(SRX12P,
SRX835P)
-- Pole Mounted (SRX12P, SRX815P, SRX835P)
-- Pole Mounted
SRX815P, SRX835P)
-- Sub Mounted (SRX812P,
SRX815P,
SRX835P)
-- Sub Mounted (SRX812P, SRX815P, SRX835P)
-- Sub Mounted
(SRX812P,
SRX815P, SRX835P)
-- Suspended (SRX812P,
SRX815P,
SRX835P)
-- Suspended
(SRX812P,
SRX815P, SRX835P)-- Suspended (SRX812P, SRX815P, SRX835P)
-- Stacked Subs (SRX818SP,
-- Stacked Subs (SRX818SP, SRX828SP)
-- StackedSRX828SP)
Subs (SRX818SP, SRX828SP)
-- Cardiod Subs (SRX818SP,
-- Cardiod Subs (SRX818SP, SRX828SP)
-- CardiodSRX828SP)
Subs (SRX818SP, SRX828SP)
MAIN MENU
MAIN MENU
? FILTERS
PRESET
? FILTERS
PRESET
ON
AUTO DIM
ON
AUTO DIM
OFF
AUTO SLEEP
OFF
AUTO POWER
SLEEP
METERS
METERS
POWER
MASTER LEVEL
MASTER LEVEL
IN
CH
OUT
CH
1
IN
BACKOUT
IN
OUT
NETWORK
IN
OUT
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
MASTER LEVEL
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
BACKOUT
IN
OUT
NETWORK
BACK
1
CH2
IN
OUT
NETWORK
LINK
LINK
DATA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
BACK
BACK
CH
CH
OUT
CH
1
LINK
DATA
MADE IN MEXICO
MADE IN MEXICO
MASTER LEVEL
MASTER LEVEL
IN
CH
CH2
NETWORK
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
MAIN MENU
MAIN MENU
PRESET
? FILTERS
PRESET
? FILTERS
AUTO DIM
ON
AUTO DIM
ON
AUTO SLEEP
OFF
AUTO SLEEP
OFF
POWER
METERS
METERS
POWER
BACK
1
CH2
CH2
IN
OUT
IN
OUT
BACK
1
1
CH
1
CH2
CH2
NETWORK
CH2
NETWORK
NETWORK
LINK
DATA
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
7
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
MASTER LEVEL
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
BACK
MASTER LEVEL
BACK
1
OUT
OUT
MADE IN MEXICO
IN
IN
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
BACK
LINK
DATA
MASTER LEVEL
NETWORK
6.
7.
8.
9.
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
NETWORK
BACK
OUT
MASTER LEVEL
OUT
IN
OUT
IN
1
CH
CH
CH2
LINK
CH2
BACK
NETWORK
LINK
DATA
MADE IN MEXICO
IN
OUT
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
BACK
MADE IN MEXICO
LINK
OUT
IN
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
DATA
IN
1
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
CH
CH2
DATA
1. Floor Standing
12P,
SRX815P,
SRX835P)
X815P,
--SRX835P)
Standing
(SRX812P, SRX815P, SRX835P)
2. Monitor
2P, SRX815P)
X815P)
-- Monitor (SRX812P, SRX815P)
SRX12P,
SRX835P)
P, SRX815P,
--SRX815P,
Pole
SRX835P)
Mounted
(SRX12P, SRX815P, SRX835P)
3. Pole Mounted
RX812P,
SRX835P)
2P,
SRX815P,
-- SRX815P,
SubSRX835P)
Mounted
(SRX812P, SRX815P, SRX835P)
812P, SRX815P,
SRX835P)
SRX815P,
-- Suspended
SRX835P)
(SRX812P, SRX815P, SRX835P)
4. Sub Mounted
RX818SP,
SRX828SP)
SP, SRX828SP)
-- Stacked
Subs (SRX818SP, SRX828SP)
RX818SP,
SRX828SP)
SP, SRX828SP)
-- Cardiod
Subs (SRX818SP, SRX828SP)
5. Suspended
NETWORK
LINK
MADE IN MEXICO
1
OUT
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MASTER LEVEL
MADE IN MEXICO
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
CH
OUT
IN
1
CH2
NETWORK
IN
BACK
NETWORK
MADE IN MEXICO
OUT
OUT
OUT
IN
1
IN
IN
CH
CH
CH2
LINK
CH2
BACK
NETWORK
NETWORK
OUT
OUT
OUT
OUT
IN
IN
1
CH2
IN
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
6
Standing(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
----Standing
Monitor(SRX812P,
(SRX812P,SRX815P)
SRX815P)
----Monitor
PoleMounted
Mounted(SRX12P,
(SRX12P,SRX815P,
SRX815P,SRX835P)
SRX835P)
----Pole
SubMounted
Mounted(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
----Sub
Suspended(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
----Suspended
Stacked
Subs(SRX818SP,
(SRX818SP,SRX828SP)
SRX828SP)
----Stacked
8Subs
CardiodSubs
Subs(SRX818SP,
(SRX818SP,SRX828SP)
SRX828SP)
----Cardiod
CH
LINK
DATA
POWER
BACK
NETWORK
IN
OUT
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
OUT
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
CH
CH2
LINK
1
IN
IN
BACK
NETWORK
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
OUT
CH
OUT
CH2
IN
IN
1
POWER
MASTER LEVEL
CH
CH2
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
9
Subs with 3-way splayed
Stacked Subs
Cardiod Subs
Cardiod Subs Vertical
-- Standing (SRX812P, SRX815P, SRX835P)
-- Monitor (SRX812P, SRX815P)
-- Pole Mounted (SRX12P, SRX815P, SRX835P)
-- Sub Mounted (SRX812P, SRX815P, SRX835P)
-- Suspended (SRX812P, SRX815P, SRX835P)
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
CH
IN
OUT
IN
OUT
MA
PRESET
AUTO DIM
AUTO SLEE
METERS
POWER
BACK
1
CH2
NETWORK
IN
CH
1
CH2
IN
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
SERIAL NO.
A HARMAN INTERNATIONAL COM
Quick Setup Guide
LCD Screen
Power LED
Power Button
Master Encoder
MAIN MENU
CH1 Direct Out
PRESET
AUTO DIM
AUTO SLEEP
METERS
POWER
2
MAIN
OFF
ON
MASTER LEVEL
CH1 Input
IN
CH1 Encoder
CH
CH2 Encoder
CH2
BACK
OUT
Back Button
MIX OUT
1
Mix Out
IN
OUT
NETWORK
Ethercon Connector
CH2 Input
CH2 Direct Out
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
Link LED
Data LED
Locking IEC Inlet
Power it on
way before plugging in your audio source. Turn CH1 and/or
CH2 Encoders to the left until the level reads “- 100” on
the LCD.
2. Connect XLR or TRS cable from audio source to CH1 and/or
CH2 Inputs.
1. Connect the supplied power cord to the Blue IEC inlet on
the rear of the speaker
2. Connect the power cord to an available power outlet.
Once the power cord is plugged into the power source,
the Green Power LED will illuminate.
3. Once the Green Power LED illuminates, press the Power
Button. After several seconds, you will notice the LCD
Screen boot and you will now be on the main screen.
Plug in the inputs
1. The CH1 and CH2 Input levels and Master Level default
to -20dB. It’s a good idea to turn the inputs down all the
3. Select LINE, CONSUMER or MIC gain setting by pushing the
correct CHANNEL ENCODER twice. You will see a rectangle
highlighting the sensitivity setting. Simply roll the encoder
left or right to select the correct setting. Once the correct
setting is shown, push the encoder one more time to make
your selection.
Set output levels
1. Set the gain level for each input using the CH1 and/or CH2
ENCODER. The input level meter on the LCD will allow you to
monitor your input level.
2. Once the input level is set, user the MASTER ENCODER to
turn up (Right) or turn down (Left) the overall level until the
desired volume is reached.
7
SRX812P, SRX815P, SRX835P Back Panel
LCD Screen
Power LED
Power Button
Master Encoder
MAIN MENU
CH1 Direct Out
POWER
PRESET
AUTO DIM
AUTO SLEEP
METERS
2
MAIN
OFF
ON
MASTER LEVEL
CH1 Input
IN
CH1 Encoder
CH
BACK
OUT
Back Button
MIX OUT
1
Mix Out
CH2 Encoder
CH2
IN
OUT
NETWORK
Ethercon Connector
CH2 Input
CH2 Direct Out
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
Locking IEC Inlet
8
Link LED
Data LED
SRX812P, SRX815P, SRX835P Back Panel
LCD Screen
Master Encoder
Allows users to access presets and basic controls for the system without a
Controls the master volume of the unit. By turning the knob counter-clockwise
network connection. Controlled with the Master Encoder and the Back Button.
you will be lowering the overall volume of the speaker. By turning the control
clockwise you will be increasing the overall volume of the speaker. See page
Power LED
25 for instructions on using the Master Encoder to control LCD screen.
This LED (Green) lights to indicate that the speaker is plugged in and
that power is going to the speaker. .
Back Button
Used in conjunction with the Master Encoder to control the LCD Screen.
Power Button
Turns the power on.
Mix Out
This XLR (male) output connector provides a method of sending audio
CH1 Input
out to an external source. Passes signal based on the input levels of channels
These balanced inputs accepts a standard XLR (female) connector and also
1 and 2 post DSP, adding some latency (approx. 2 milliseconds) to the signal.
a 1/4” TRS phone plug. A broad range of signals from microphones, audio
mixing consoles and electronic musical instruments may be connected here.
Ethercon Connector
Allows network connection with a standard Ethernet cable for networking
CH1 Direct Out
multiple units and controlling the system. This connector is not to be
Male balanced XLR output connector. Passes signal directly from the input
connected to a LAN line.
to the output, bypassing DSP for zero latency. This connector provides a fullrange signal which can be daisy chained to another speaker.
Link LED
This LED lights to indicate that the speaker is connected to a network.
CH1 Encoder
Controls the gain of CH1. By turning the signal counter-clockwise you will be
Data LED
lowering the gain of your source material. By turning the control clockwise you
This LED blinks to indicate that data is being sent and received by the system.
will be increasing the gain.
CH2 Input
These balanced inputs accepts a standard XLR (female) connector and also
a 1/4” TRS phone plug. A broad range of signals from microphones, audio
mixing consoles and electronic musical instruments may be connected here.
CH2 Direct Out
Male balanced XLR output connector. Passes signal directly from the input
to the output, bypassing DSP for zero latency. This connector provides a fullrange signal which can be daisy chained to another speaker.
CH2 Encoder
Controls the gain of CH2. By turning the signal counter-clockwise you will be
lowering the gain of your source material. By turning the control clockwise you
will be increasing the gain.
Locking IEC Inlet
Standard IEC AC mains input connector.
9
SRX828SP, SRX818SP Back Panel
LCD Screen
Power LED
Power Button
Master
Encoder
MAIN MENU
CH1 Direct Out
PRESET
AUTO DIM
AUTO SLEEP
METERS
POWER
2
MAIN
OFF
ON
MASTER LEVEL
CH1 Input
CH
IN
OUT
IN
OUT
BACK
Back Button
1
CH2
NETWORK
Ethercon Connector
CH2 Input
CH2 Direct Out
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
Locking IEC Inlet
10
Link LED
Data LED
SRX828SP, SRX818SP Back Panel
LCD Screen
Master Encoder
Allows users to access presets and basic controls for the system without a
Controls the master volume of the unit. By turning the knob counter-clockwise
network connection. Controlled with the Master Encoder and the Back Button.
you will be lowering the overall volume of the speaker. By turning the control
clockwise you will be increasing the overall volume of the speaker. See page
Power LED
25 for instructions on using the Master Encoder to control LCD screen.
This LED (Green) lights to indicate that the speaker is plugged in and
that power is going to the speaker.
Back Button
Used in conjunction with the Master Encoder to control the LCD Screen.
Power Button
Turns the power on.
Ethercon Connector
Allows network connection with a standard Ethernet cable for networking
CH1 Input
multiple units and controlling the system. This connector is not to be
These balanced inputs accepts a standard XLR (female) connector and also
connected to a LAN line.
a 1/4” TRS phone plug. A broad range of signals from microphones, audio
mixing consoles and electronic musical instruments may be connected here.
Link LED
This LED lights to indicate that the speaker is connected to a network.
CH1 Direct Out
Male balanced XLR output connector. Passes signal directly from the input
Data LED
to the output, bypassing DSP for zero latency. This connector provides a full-
This LED blinks to indicate that data is being sent and received by the system.
range signal which can be daisy chained to another speaker.
CH2 Input
These balanced inputs accepts a standard XLR (female) connector and also
a 1/4” TRS phone plug. A broad range of signals from microphones, audio
mixing consoles and electronic musical instruments may be connected here.
CH2 Direct Out
Male balanced XLR output connector. Passes signal directly from the input
to the output, bypassing DSP for zero latency. This connector provides a fullrange signal which can be daisy chained to another speaker.
Locking IEC Inlet
Standard IEC AC mains input connector.
11
Overview - SRX800 Family
SRX812P SRX815P SRX835P SRX818SP SRX828SP
Thank you for purchasing the new JBL SRX800!
The SRX800 Series is the next generation high performance powered loudspeaker system from JBL Professional. Comprising
three full range and two subwoofers, the SRX800 boasts an array of premium features that make it the very best system in
its class. Drawing on JBL’s long history of groundbreaking technology and innovative loudspeaker design, the SRX800 Series
meets the needs of the most demanding applications where high performance, comprehensive control and legendary JBL sound
are required. Each component in the SRX800 Series was purposefully designed and thought through with full consideration for
its intended use, each component carefully matched to achieve a perfectly tuned system that is both powerful and easy to use.
The full range 12” two-way, 15” two-way and 15” three-way systems are powered by proprietary 2,000 Watt Crown
amplification. The 18” subwoofer and 18” dual subwoofer feature 1,000 and 2,000 Watt Crown amplifiers. All models integrate
Crown’s Proprietary Front-End DriveCore Technology, premium JBL user-configurable DSP, including V5 Tunings compatible
with our flagship Vertec and VTX touring systems, and full HiQnet Network control with Mac and PC software and standalone
applications for iOS and Android. Now, local touring houses and smaller to medium installations can deploy a no-compromise,
all-in-one solution configurable as a full range system with monitors and subs, either floor standing, tripod mounted, stacked, or
pole mounted, and fully flyable with the SRX800’s integrated suspension points.
12
































SRX812P, SRX815P - Block Diagram
13
14
MIX
CH2
CH1
OUT
IN
OUT
IN
MIC
LINE
CONSUMER
MIC
LINE
CONSUMER
DAC
ADC
SIGNAL 2
SIGNAL 1
LEVEL 2
∑
LEVEL 1
EQ
PRESETS
GAIN
SIGNAL
MASTER
LPF
HPF
DSP
LIM
LIMIT
CH2
CH1
CROSSOVER
LF
MR
HF
SRX835P - Block Diagram




















SRX818SP - Block Diagram
15
16






















SRX828SP - Block Diagram
SRX812P Specifications
System Specification
System Type: Maximum SPL Output: Frequency Range (-10dB): Frequency Response (-3dB): Amplification
System Power Rating: Input Impedance: Line Input Gain: Consumer Input Gain: Mic Input Gain: Maximum Input Level:
• Line: • Consumer: • Mic: Connectors: LED Indicators: Cooling: AC Power Input: AC Power Consumption (120V~): Speaker Specification
LF Driver: HF Driver: Coverage Pattern: Crossover Frequency: Enclosure
Material: Monitor Angle: Suspension/Mounting: Handles: Finish: Grille: Dimensions: Weight: Shipping Weight: Self powered 12”, two-way, bass-reflex
136dB
40Hz - 21kHz
48Hz - 20kHz
2000W Peak, 1500W Continuous
40k balanced, 20k unbalanced
21 dB
33 dB
45 dB
20dBu
8dBu
-4dBu
Neutrik 1/4 - XLR input; Neutrik XLR Output
Power LED (Green), Network Link (Green), Network Data (Yellow)
On-Demand variable speed fan
100 - 240V~ 50/60Hz
2.2A (1/8th Power), 5.6A (1/3rd Power)
2272F
2432H
90 x 50
1.9kHz
18mm plywood
Yes
Dual 36mm pole socket, 12 x M10 Suspension points
3
Obsidian Duraflex™ finish
Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
(L x W x H): 16.87” x 16.31” x 25.11” (429mm x 415mm x 638mm)
58.0 lbs (26.4kg)
67 lbs (30.5kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at
http://www.jblpro.com/www/products/portable-market/srx800-series
428 mm
16.87 in
414 mm
16.31 in
638 mm
25.11 in
Bottom View
458 mm
18.03 in
FrontSRX812P
View
Left View
479 mm
18.82 in
Rear View
17
SRX815P Specifications
System Specification
System Type: Maximum SPL Output: Frequency Range (-10dB): Frequency Response (-3dB): Self powered 15”, two-way, bass-reflex
137dB
36Hz - 21kHz
44Hz - 20kHz
Amplification
System Power Rating: Input Impedance: Line Input Gain: Consumer Input Gain: Mic Input Gain: Maximum Input Level:
• Line: • Consumer: • Mic: Connectors: LED Indicators: Cooling: AC Power Input: AC Power Consumption (120V~): Speaker Specification
LF Driver: HF Driver: Coverage Pattern: Crossover Frequency: Enclosure
Material: Monitor Angle: Suspension/Mounting: Handles: Finish: 414 mm
Grille:16.31
in
Dimensions (L x W x H): Weight: mm
Shipping Weight: 638
25.11 in
2000W Peak, 1500W Continuous
40k balanced, 20k unbalanced
21 dB
33 dB
45 dB
20dBu
8dBu
-4dBu
Neutrik 1/4 - XLR input; Neutrik XLR Output
Power LED (Green), Network Link (Green), Network Data (Yellow)
On-Demand variable speed fan
100 - 240V~ 50/60Hz
2.2A (1/8th Power), 5.6A (1/3rd Power)
2275F
2432H
90 x 50
3kHz
18mm plywood
Yes
Dual 36mm pole socket, 12 x M10 Suspension points
428 mm
3
16.87 in
Obsidian Duraflex™ finish
Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
18.82” x 18.03” x 27.20” (478mm x 458mm x 691mm)
63.0 lbs (28.6kg)
73.0 lbs (33.2kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at
http://www.jblpro.com/www/products/portable-market/srx800-series
SRX812P
479 mm
18.82 in
458 mm
18.03 in
691 mm
27.20 in
Bottom View
SRX815P
Front View
Left
View
476 mm
18.74 in
18
544 mm
21.40 in
Rear View
SRX835P Specifications
System Specification
System Type: Maximum SPL Output: Frequency Range (-10dB): Frequency Response (-3dB): Amplification
Self powered 15”, three-way, bass-reflex
137dB
33Hz - 21kHz
41Hz - 20kHz
System Power Rating: Input Impedance: Line Input Gain: Consumer Input Gain: Mic Input Gain: Maximum Input Level:
• Line: • Consumer: • Mic: Connectors: LED Indicators: Cooling: AC Power Input: AC Power Consumption (120V~): 2000W Peak, 1500W Continuous
40k balanced, 20k unbalanced
21 dB
33 dB
45 dB
20dBu
8dBu
-4dBu
Neutrik 1/4 - XLR input; Neutrik XLR Output
Power LED (Green), Network Link (Green), Network Data (Yellow)
On-Demand variable speed fan
100 - 240V~ 50/60Hz
428 mm
2.2A (1/8th Power), 16.87
5.6Ain(1/3rd Power)
414 mm
16.31 in
Speaker
Specification
LF Driver: MF Driver: 638 mm
25.11 in
HF Driver: Coverage Pattern: Crossover Frequency: Enclosure
Material: Suspension/Mounting: Handles:
458 mm
Finish:18.03
in
Grille: Dimensions (L x W x H): 691 mm
Weight: 27.20 in
Shipping Weight: 2275F
2107H
2432H
60 x 40
330Hz & 2.4kHz
SRX812P
18mm plywood
479 mm
18.82 in
Single 36mm pole socket,
12 x M10 Suspension points
2
Obsidian Duraflex™ finish
Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
18.74” x 21.4” x 38.74” (476mm x 544mm x 984mm)
85.0 lbs (38.6kg)
97.0 lbs (44.0kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at
http://www.jblpro.com/www/products/portable-market/srx800-series
SRX815P
476 mm
18.74 in
544 mm
21.40 in
984 mm
38.74 in
Bottom View
684 mm
26.92 in
Front
View
SRX835P
Left View
683 mm
26.89 in
Rear View
19
SRX818SP Specifications
System Specification
System Type: Maximum SPL Output: Frequency Range (-10dB): Frequency Response (-3dB): Amplification
System Power Rating:
Input Impedance: Line Input Gain: Consumer Input Gain: Maximum Input Level:
414 mm
• Line:
16.31
in
• Consumer: Connectors: 638 mm
LED Indicators: 25.11 in
Cooling: AC Power Input: AC Power Consumption (120V~): Speaker Specification
LF Driver: Crossover Frequency: 458 mm
18.03 in
Enclosure
Material: mm
Suspension/Mounting: 691
27.20 in
Handles: Finish: Grille: Dimensions (L x W x H): Weight: Shipping Weight: Self powered 18”, subwoofer system
135dB
29Hz - 150Hz
35Hz - 120Hz
1000W Peak , 750W Continuous
40k balanced, 20k unbalanced
21 dB
428 mm
33 dB
16.87 in
20dBu
8dBu
Neutrik 1/4 - XLR input; Neutrik XLR Output
Power LED (Green), Network Link (Green), Network Data (Yellow)
On-Demand variable speed fan
100 - 240V~ 50/60Hz
2.2A (1/8th Power), 5.6A (1/3rd Power)
SRX812P
2279F
80Hz
479 mm
18.82 in
18mm plywood
M20 Threaded Pole Mount
4
Obsidian Duraflex™ finish
Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
26.89” x 26.92” x 22.62” (683mm x 684mm x 575mm)
SRX815P
87.0
lbs (39.5kg)
476 mm
103 lbs (46.8kg)
18.74 in
*For exact544
specifications
including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at
mm
21.40 in
http://www.jblpro.com/www/products/portable-market/srx800-series
984 mm
38.74 in
SRX835P
684 mm
26.92 in
683 mm
26.89 in
575 mm
22.62 in
Bottom View
20
1204 mm
47.42 in
SRX818SP
Front
View
Left View
680 mm
26.79 in
Rear View
SRX828SP Specifications
System Specification
System Type: Maximum SPL Output: Frequency Range414
(-10dB):
mm
16.31 in
Frequency Response
(-3dB): Amplification
Self powered dual 18”, subwoofer
system
428 mm
16.87 in
141dB
29Hz - 150Hz
35Hz - 120Hz
638 mm
25.11 in
System Power Rating: 2000W Peak (1000W x 2), 1500W continuous (750W x 2)
Input Impedance: 40k balanced, 20k unbalanced
Line Input Gain: 21 dB
Consumer Input Gain: 33 dB
Maximum Input Level:
SRX812P
• Line: 20dBu
479 mm
18.82 in
• Consumer: 8dBu
Connectors: 458 mm
Neutrik 1/4 - XLR input; Neutrik XLR Output
LED Indicators: 18.03 in
Power LED (Green), Network Link (Green), Network Data (Yellow)
Cooling: On-Demand variable speed fan
AC Power Input: 100 - 240V~ 50/60Hz
691 mm
AC Power Consumption (120V~):
2.2A (1/8th Power), 5.6A (1/3rd Power)
27.20 in
Speaker Specification
LF Driver: Crossover Frequency: Enclosure
Material: 544 mm
Handles: 21.40 in
Finish: Grille: Dimensions (L x W x H): Weight: Shipping Weight: (2x) 2279F
80Hz
SRX815P
476 mm
18.74 in
18mm plywood
8
Obsidian Duraflex™ finish
Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
26.79” x 47.42” x 22.57” (681mm x 1205mm x 574mm)
984 mm
145.0 lbs (65.9kg)
38.74 in
165.0 (75.0kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at
http://www.jblpro.com/www/products/portable-market/srx800-series
SRX835P
684 mm
26.92 in
683 mm
26.89 in
575 mm
22.62 in
SRX818SP
1204 mm
47.42 in
680 mm
26.79 in
573 mm
22.57 in
Bottom View
Front View
SRX828SP
Left View
Rear View
21
Purposeful Product Design
Portability made easy
The SRX800 series was designed as a versatile all-in-one solution for a variety of applications including touring and permanent
installations. Special attention was given to the needs of consumers who require a high level of ruggedness, reliability, and
portability. To those ends, these systems feature 14 gauge steel grilles with “L” beam indents on either side for increased
structural rigidity. The speakers are constructed from 18mm plywood to withstand drops, bumps and whatever else will be
thrown at them. All models feature our patented DuraFlex coating which is made to survive years of abuse.
To make sure the speakers are easy to move around and comfortable to use, engineers developed an ergonomic handle cup that
allows users to pick the speakers up without cutting off circulation to their hands. Also included are multiple M10 suspension
points and rubber feet for the monitor angle so that whether the speakers are suspended, used as stage monitors, mounted
to a pole or tripod, or stood on the floor or a shelf, they will stay securely in place and deliver sound wherever it’s needed. The
subwoofers have indexing feet for stacking in both standard and cardioid configurations. The back panel features glow in the
dark ink and an LED screen so that users can connect and control the speaker in darker areas without having to turn on lights or
reach for a control device.
22
Pole Mount
M10 Suspension Points
Multiple Handles & Indexed Feet
Side Handle
Secure Stacking
Monitor Position
Component Elements
High Performance Without Compromise
From the brand new transducers to the 14-guage steel grilles, each component in the SRX800 Series was specifically designed
for optimal performance in these systems. Featuring a purpose-built Crown amplifier and a full suite of user configurable DSP,
these systems deliver the latest technologies from Harman Professional in one easy to use, high performing platform.
2432H HF Driver
High frequencies are handled by the JBL 2432H 3” voice-coil Compression
Driver - the only 3” voice coil in this class. In addition to the weight reduction
provided by neodymium, the large voice coils and diaphragms in these drivers
are capable of handling very high power levels with reduced distortion and
increased phase coherence resulting in smooth, crystal clear high frequencies.
Low Frequency Drivers
JBL’s patented Differential Drive® Technology ferrite drivers incorporate
3” voice coils with lower mass ferrite magnets for reduced weight while
maximizing power amp efficiency with greater heat dissipation and increased
power handling resulting in exceptionally low distortion and extended low
frequency response.
Mid Frequency Drivers
SRX835’s midrange driver is derived from the midrange transducer on the
VTX 20 touring line array system. The outside cast aluminum frame acts as
the structural support, acoustic cavity, and heat sink for the driver, optimizing
both space in the speaker cabinet and the performance of the system at the
same time.
Patented (PT) Waveguides
High frequency drivers use JBL’s patented Progressive Transition Waveguides
which offer dramatically improved constant beamwidth and directivity, lower
distortion, and overall smooth frequency response free of high-Q peaks. Wide
coverage angles are achieved without compromise and harmonic distortion
is minimized to allow maximum SPL capability of the compression drivers
without harshness.
23
Component Elements
HiQnet Network Control
With full HiQnet Network Integration, configuring an SRX800 system is
dramatically simplified, saving time while fully automating the control interface
configuration. Simple wired control is provided via Ethercon connector and
third party wireless router capability is included. Control options include Audio
Architect, HiQnet Motion Control™ iOS app, and SRX Connect, a standalone
app for iOS and Android.
Premium DSP Technology
A full suite of User configurable DSP driven by the SRX800 series’ powerful
onboard 400mHz Sharc DSP includes 20 PEQs, up to 2 seconds of delay,
signal generators, input mixing, amplifier monitoring, and 50 User Presets.
In addition, the system features 96kHZ FIR filters, LevelMax™ Limiting, and
is compatible with V5 JBL Tunings, providing compatibility with our flagship
Vertec and VTX touring systems.
Crown DriveCore Technology Amplification
Each model is powered by Crown Proprietary Front-End DriveCore technology
featuring a massive 2000W Power Rating, the highest power rating in this
class of loudspeakers. With an outstandingly high 103dB signal-to-noise
ratio, the SRX800 Series is capable of massive sound pressure levels with
exceptional headroom, very low distortion and absolute clarity throughout its
frequency range. A true universal power supply w/ PFC and locking IEC power
cords ensure quick and secure connection for easy setups. 24
Back Panel LCD
INTRO
JBL SRX815P
1
JBL SRX815P
JBL SRX815P
JBL SRX815P
MAIN
JBL SRX815P
JBL SRX815P
MAIN
MAIN
MAIN
4
2
INTRO
INTRO
0.0INTRO
0.0INTRO
0.0INTRO
0.0
0.0
0.0
3
INPUT SCREEN
channel
1
MAIN
INPUT SCREEN
MAIN
INPUT SCREEN
channel 1
0.0SCREEN
INPUT
channel1 1
3
channel 1
0.0SCREEN
INPUT
SCREEN
INPUT
sensitivitY line
0.0
channel 1
channel 1
0.0
sensitivitY line
sensitivitY line
0.0
0.0
sensitivitY line
MAIN MENU
MAIN MENU
sensitivitY line
MAIN MENU
sensitivitY
line1
MAIN
PRESET
MAIN MENU MAIN MENU
4
2 OFF
AUTO
DIMMAIN MENU MAIN
MENU
1
MAIN
PRESET
AUTO
SLEEP
ON
MAIN MENU
1
MAIN
PRESET
AUTO DIM
MAINOFF
MENU
METERS
MAIN
MENU
1
MAIN
PRESET
OFF
AUTO
DIM
AUTO SLEEP
ON
MAIN MENU
MAIN
MENU
OFF
DIM
ON
AUTO
SLEEP
METERS
1
MAIN
PRESET
1
MAIN
PRESET
ON
AUTO SLEEP
METERS
OFF
AUTO DIM
OFF
AUTO
DIM
METERS
PRESETS
ON
AUTO SLEEP
AUTO SLEEP
ON
MAIN
MENU
METERS
PRESETS
METERS
PRESET
1
MAIN
PRESETS
MAIN MENU
AUTO DIMMAIN MENU
OFF
PRESETS
PRESET
1
MAIN
AUTO
SLEEP
ON
MAIN MENU
PRESET
1
MAIN
AUTO DIM
OFF
PRESETS
METERS
PRESETS
1
MAIN
PRESET
AUTO
DIM
OFF
AUTO
SLEEP
ON
MAIN MENU
MAIN
MENU
DIM
OFF
AUTO
SLEEP
ON
METERS
1
MAIN
PRESET
1
MAIN
PRESET
AUTO SLEEP
ON
METERS
AUTO DIM
OFF
OFF
AUTO
DIM
AUTO DIM
METERS
AUTO SLEEP
ON
MAIN MENU
AUTO SLEEP
ON
METERS
AUTO DIM
METERS
PRESET
2
MONITOR
AUTO DIM
MAIN MENU
OFF
AUTO DIMMAIN MENU
AUTO
DIM
PRESET
2
MONITOR
AUTO
SLEEP
OFF
MAIN
MENU
PRESET
2
MONITOR
AUTO DIM
OFF
AUTO
DIM
METERS
AUTO
DIM
PRESET
2
MONITOR
OFF
AUTO
DIM
AUTO SLEEP
OFF
MAIN MENU
DIMMAIN MENU
AUTO
SLEEP
OFF
METERS
PRESET
2
MONITOR
2
MONITOR
PRESET
AUTO SLEEP
OFF
METERS
AUTO DIM
OFF
AUTOOFF
SLEEP
AUTO
DIM
METERS
AUTO SLEEP
OFF
MAIN MENU
OFF
AUTO SLEEP
AUTO SLEEP
METERS
PRESET
1
MAIN
METERS
MAIN MENU AUTO SLEEP
AUTO DIMMAIN MENU AUTOOFF
SLEEP
PRESET
1
MAIN
AUTO SLEEP
OFF
MAIN MENU
PRESET
1
MAIN
AUTO DIM
AUTOOFF
SLEEP
METERS
AUTO
SLEEP
PRESET
1
MAIN
OFF
AUTO
DIM
AUTO SLEEP
OFF
MAIN MENU
DIMMAIN MENU
AUTO
SLEEP
OFF
METERS
1
MAIN
PRESET
PRESET
1
MAIN
AUTO SLEEP
OFF
METERS
AUTO DIM
OFF
INPUT
METERS
OFF
AUTO
DIM
METERS
OFF
AUTO SLEEP
input MEters
OFF
AUTO SLEEP
INPUT
METERS
METERS
METERS
input MEtersINPUT METERS
Introduction
The LCD Screen on the back panel of the speaker allows basic control of the system, as well as
access to presets and network settings.
Plug in the system and power it on. Once the amp boots up, this screen will be displayed. This
screen will also be displayed after one minute of inactivity. It can also be accessed by pressing
the Back Button 5 times to exit all menus.
1.
2.
3.
4.
Speaker Model Name
Master Attenuator Level. Turn the Master Encoder to adjust between -100 and +12
Main Output Meter
Preset Indicator
Input Screen
From the Home Screen, press either one of the Channel Encoders to access the Input Screen for
the channel. Press the Back Button or wait one minute to return to the Home Screen.
1.
2.
3.
4.
Channel Indicator. Press the other Channel Encoder to switch channels.
Input Attenuator Level. Turn the Channel encoder to adjust from -80 to +12.
Channel Input Meter
Sensitivity Setting Indicator. Press the Channel Encoder to highlight the setting, then turn to
adjust between Line (default,) Consumer, and Mic. Once the desired level is selected, press
the Channel Encoder down again to set it.
Main Menu
From the Home Screen, press the Master Encoder to access the Main Menu. Loudspeaker
Settings and Presets are accessed from the Main Menu
Presets
From the Main Menu, turn the Master Encoder until “Preset” is highlighted. Press the Master
Encoder to access Presets. Turn the Master Encoder to scroll through Presets and then press the
Master Encoder to select the desired Preset. Once the Preset is selected, you will be returned to
the Main Menu. Hitting the Back Button at any time will also return you to the Main Menu.
Auto Dim
Toggling the Auto Dim on and off will determine whether or not the LCD panel on the speaker
dims after a minute of not being used.
From the Main Menu, turn the Master Encoder until “Auto Dim” is highlighted. Press the Master
Encoder to access Auto Dim. Turn the Master Encoder to toggle between “On” and “Off.”Once the
desired setting is displayed, press the master encoder to select that setting; you will be returned
to the Main Menu. Hitting the Back Button at any time will also return you to the Main Menu.
Auto Sleep
Toggling the Auto Sleep on or off will determine whether or not the speaker goes into Sleep
Mode after a period of time. In Sleep Mode, the outputs will be completely turned off so that any
spurious outside noise such as radio signals will not be passed through the system. The speaker
will come out of sleep mode as soon as audio is passed through the system again.
From the Main Menu, turn the Master Encoder until “Auto Sleep” is highlighted. Press the Master
Encoder to access Auto Sleep. Turn the Master Encoder to toggle between “On” and “Off.”Once
the desired setting is displayed, press the master encoder to select that setting; you will be
returned to the Main Menu. Hitting the Back Button at any time will also return you to the
Main Menu.
25
METERS
AUTO
OFF
MAIN MEters
MENU
OFF
AUTO SLEEP
DIM
input
METERS
PRESETSLEEP
1
INPUTMAIN
METERS
AUTO
OFF
OFF
AUTO
DIM
CH1
METERS input MEters
INPUT METERS
AUTO SLEEP
OFF
CH2
input
MEters
INPUT METERS
METERS
CH1
input MEters
INPUT METERS
CH2
CH1
input MEters
CH1
CH2
INPUT METERS
NETWORK MENU 1 - IP
input
MEters
CH2
CH1
network MENU
CH2
NETWORK MENU 1 - IP
IP
169.254.155.248
CH1
SUBNETnetwork MENU
255.255.0.0
NETWORK MENU 1 - IP
CH2
IP
169.254.155.248
HIQNET
1
network NETWORK
MENU MENU 1 - IP
SUBNET
255.255.0.0
DHCP
ON
IP
169.254.155.248
network
MENU
HIQNET
NETWORK MENU 1 -1IP
SUBNET
255.255.0.0
IP
169.254.155.248
MENU
DHCP network
ON
HIQNET
SUBNET
255.255.0.0
NETWORK
1 -1IP
NETWORK
MENU MENU
2 - SUBNET
IP
169.254.155.248
DHCP
ON
HIQNET
SUBNETnetwork MENU
255.255.0.01
DHCP
ON1
IP
169.254.155.248
NETWORK
MENU 2 - SUBNET
HIQNET
network
MENU
SUBNET
255.255.0.0
DHCP
ON
NETWORK MENU 2 - SUBNET
HIQNET
IP
169.254.155.2481
network
MENU
NETWORK
MENU 2 - SUBNET
DHCP
ON
SUBNET
255.255.0.0
IP
169.254.155.248
network
MENU
HIQNET
1
NETWORK MENU 2 - SUBNET
SUBNETnetwork
255.255.0.0
169.254.155.248
IP
MENU
DHCP
ON
HIQNET
1
255.255.0.0
SUBNET
NETWORK
MENU23--SUBNET
HIQNET
NETWORK
MENU
169.254.155.248
IP
DHCP
ON
HIQNET
255.255.0.01
SUBNETnetwork MENU
NETWORK
MENU 3 - HIQNET
DHCP
ON1
IP
169.254.155.248
HIQNET
network MENU
SUBNET
255.255.0.0
DHCP
ON
NETWORK MENU 3 - HIQNET
IP
169.254.155.2481
HIQNET
network
MENU
NETWORK
MENU 3 - HIQNET
SUBNET
255.255.0.0
DHCP
ON
169.254.155.248
IP
network
MENU
HIQNET
1
NETWORK MENU 3 - HIQNET
255.255.0.0
SUBNET
169.254.155.248
IP
DHCP network MENU
ON
1
HIQNET
255.255.0.0
SUBNET
NETWORK
MENU 3 - HIQNET
IP
169.254.155.248
NETWORK MENU 4 - DHCP
DHCP
ON
HIQNET
MENU
SUBNETnetwork
255.255.0.01
network MENU
DHCP
ON1
IP
169.254.155.248
HIQNET
NETWORK
MENU 4 - DHCP
IP
169.254.155.248
SUBNETnetwork MENU
255.255.0.0
DHCP
ON
SUBNET
255.255.0.0
NETWORK MENU 4 - DHCP
HIQNET
169.254.155.24811
IP
HIQNET
network
MENU
DHCP
NETWORK
MENU 4 - ON
DHCP
255.255.0.0
SUBNET
DHCP
ON
169.254.155.248
IP
network
MENU
1
HIQNET
NETWORK MENU 4 - DHCP
255.255.0.0
SUBNET
IP
169.254.155.248
network
MENU
DHCP
ON
HIQNET
1
SUBNET
255.255.0.0
NETWORK
MENU 4 - DHCP
169.254.155.248
IP
INFORMATION
DHCP
ON
HIQNET
SUBNETnetwork MENU
255.255.0.01
INFORMATION
DHCP
ON1
IP
169.254.155.248
HIQNET
INFORMATION
MODEL
JBL
SRX815P
SUBNET
255.255.0.0
DHCP INFORMATION
ON
VERSION
0.0.3.41
HIQNET
INFORMATION
MODEL
JBL SRX815P
MAC
00:0A:40:10:05:C5
DHCP INFORMATION
ON
INFORMATION
VERSION
0.0.3.4
MODEL INFORMATION
JBL SRX815P
MAC
00:0A:40:10:05:C5
INFORMATION
VERSION
0.0.3.4
JBL SRX815P
MODEL INFORMATION
MAC
00:0A:40:10:05:C5
VERSION
0.0.3.4
INFORMATION
MODEL
JBL SRX815P
00:0A:40:10:05:C5
MAC
VERSIONINFORMATION
0.0.3.4
Back panel LCD
MODEL
MAC
VERSION
MAC
26
JBL SRX815P
00:0A:40:10:05:C5
0.0.3.4
00:0A:40:10:05:C5
Meters
From the Main Menu, turn the Master Encoder until “Meters” is highlighted. Press the
Master Encoder to access Meters. Input Meters for both channels will be displayed. Press
the Back Button to return to the Main Menu or wait one minute to be returned to the
Home Screen.
Network Menu
From the Main Menu, turn the Master Encoder until “Network Menu” is highlighted. Press
the Master Encoder to access the Network Menu.
Adjustments to the systems IP address, Subnet Address, and HiQNet Address can be
made from the Network Menu. Please note that “DHCP” must be set to “Off,” in order to
manually adjust the IP or Subnet addresses.
1. IP.
In the Network Menu, turn the Master Encoder until “IP” is highlighted. Press the
Master Encoder to access the IP address. Turn the Master Encoder to adjust each
digit string of the IP address. Once a digit string is set to its desired value, press the
Master Encoder to move to the next string. Once the entire IP address is set, press
the Master Encoder to save changes. Pressing the Back Button at any time will
cancel changes and return you to the Network Menu.
2. SUBNET.
In the Network Menu, turn the Master Encoder until “SUBNET” is highlighted. Press
the Master Encoder to access the SUBNET address. Turn the Master Encoder to
adjust each digit string of the SUBNET address. Once a digit string is set to its
desired value, press the Master Encoder to move to the next string . Once the entire
SUBNET address is set, press the Master Encoder to save changes. Pressing the
Back Button at any time will cancel changes and return you to the Network Menu.
3. HiQNet
In the Network Menu, turn the Master Encoder until “HiQNet” is highlighted. Press
the master encoder to access the HiQNet address. Turn the Master Encoder to scroll
to the desired HiQNet address. Once the desired HiQNet address is displayed, press
the Master Encoder to select that address and return to the Network Menu.
4. DHCP
In the Network Menu, turn the Master Encoder until “DHCP” is highlighted. Press the
Master Encoder to access DHCP. Turn the Master Encoder to toggle between “On”
and “Off.”Once the desired setting is displayed, press the master encoder to select
that setting; you will be returned to the Network Menu. Hitting the Back Button at any
time will also return you to the Network Menu. NOTE: “DHCP” must be set to “Off,”
in order to manually adjust the IP or Subnet addresses.
Information
From the Main Menu, turn the Master Encoder until “Information” is highlighted. Press
the Master Encoder to access Information. The Model Number of the system, software
version, and MAC address are displayed in this screen. Press the Back Button to return to
the Main Menu.
SRX Presets
Main
60Hz Sub, 80Hz Sub, 100Hz Sub, 120Hz Sub
This is the standard tuning for SRX812P, SRX815P, and
SRX835P for use without a subwoofer.
These are the tunings to use with the SRX812P, SRX815P,
and SRX835P when they are used with a subwoofer other
than SRX818SP or SRX828SP. Depending on the range and
specifications of the subwoofer, different crossover points are
provided to make an ideal match.
Monitor
Monitor tuning can be used for both SRX812P and SRX815P
when they are deployed in the monitor position.
Speech
This is an ideal preset for speech intelligibility on the SRX812P,
SRX815P, and SRX835P
SRX Sub
This is the preset to use in the SRX812P, SRX815P, and
SRX835P when they are used with either the SRX818SP or the
SRX828SP. This preset matches the performance of the SRX
full range systems to the SRX subwoofers precisely, making for
an ideal subwoofer/satellite system.
SRX Top
60Hz , 80Hz , 100Hz , 120Hz
These are the tunings to use with the SRX818SP and
SRX828SP when they are used with full range systems other
than the SRX812P, SRX815P, and SRX835P. Depending on the
range and specifications of the full range speakers, different
crossover points are provided to make an ideal match.
Cardioid 60, Cardioid 80
These tunings are to be used in the rear-facing subwoofers
only in cardioid systems. Select the desired frequency for the
crossover based on what the tunings used in the front-facing
subwoofers. Use Cardioid 80 if the other subwoofers are set to
SRX Top.
This is the preset to use in the SRX818SP and SRX828SP when
they are used with the SRX812P, SRX815P, or SRX835P. This
preset matches the performance of the SRX full range systems
to the SRX subwoofers precisely, making for an ideal subwoofer/
satellite system.
27
SRX Presets
Preset Crossovers
Presets are included to use SRX with a variety of different full range speakers and subwoofers. This chart details which presets to
use in which systems to achieve optimal performance.
SRX 812/815
SRX 835
SRX Sub
Normal
SRX 818
SRX Top
Generic Top Box
60Hz Sub Crossover
Generic Top Box
80Hz Sub Crossover
60Hz HiPass
80Hz HiPass
SRX Sub
SRX Top
SRX Sub
100Hz HiPass
100Hz
120Hz HiPass
120Hz
80Hz HiPass
Cardioid 80Hz
Cardioid 80Hz*
Cardioid 80Hz*
Cardioid 80Hz*
60Hz Sub
Cardioid 60Hz
Cardioid 60Hz*
SRX Sub
Normal
SRX Top
SRX 828
80Hz
60Hz
SRX Sub
Generic Top Box
Generic Top Box
100Hz Sub Crossover 120Hz Sub Crossover
Cardioid 80Hz
Cardioid 80Hz*
120Hz HiPass
120Hz
80Hz HiPass
Cardioid 80Hz*
Cardioid 60Hz*
100Hz
80Hz
SRX Sub
100Hz HiPass
80Hz HiPass
60Hz HiPass
60Hz
60Hz Sub
Cardioid 60Hz
Cardioid 60Hz*
SRX Sub
SRX Top
SRX Sub
60Hz HiPass
Cardioid 80Hz*
60Hz HiPass
Cardioid 60Hz*
60Hz Sub
60Hz
60Hz LoPass
80Hz
80Hz Sub
80Hz LoPass
Generic
Subs
100Hz Sub
100Hz
100Hz LoPass
120Hz Sub
120Hz
120Hz LoPass
80Hz Sub
80Hz LoPass
100Hz Sub
100Hz LoPass
120Hz Sub
120Hz LoPass
*The Cardioid Preset is always selected only on the rear-facing box. The two front facing boxes should be set to your selected crossover frequency, eg. 60Hz or 80Hz.
28
Premium DSP Technology
Introduction
The onboard suite of user controllable DSP featured in SRX800
allows users to set up and fine tune their systems with an extremely
high degree of ease and precision. In addition to the JBL engineered
application presets, users can define and recall their own presets for
use in a variety of settings and applications.
DSP
V5 Compatible JBL Tunings
•
96kHz FIR Filters
•
LevelMax™ Limiting
Full Suite of User Controllable DSP
Controller
•
20 PEQs with a full suite of filters
•
2 sec of delay
•
Signal Generator: Pink Noise, White Noise, and Sine Waves
•
Input mixing
•
Amplifier Monitoring: Input Voltage, Thermal Errors, Clip
•
50 User Presets
SRX Connect App
Basic control over the system is provided through the SRX Control
App, available for iOS, and android devices. Typical setups are easily
achieved and controlled via this app.
Audio Architect
Networking
For more advanced configurations, users can control the system
using Audio Architect. Audio Architect provides incredible flexibility
with the same components scaling from an 80,000 seat stadium
down to a small performing arts center. Here it seamlessly continues
to act as the vehicle for artistic expression by delivering the highest
quality sound reproduction and enabling the artists to convey a
dazzling performance. Whether a theater of 200 or 2,000, the
HARMAN solution raises the roof.
29
Networking
SRX800 Speakers feature an Ethernet connector so that they can be controlled via Audio Architect (version 1.60 or later) or SRX
Connect. The latest versions of both of these programs can be found at http://www.jblpro.com/www/products/portable-market/
srx800-series.
When a connection is established, the LINK LED on the back panel of the speaker will illuminate. The DATA LED will also light to
indicate that the speaker is sending and receiving information via the network.
There are several options for connecting the speakers to a network:
1. Direct Connection
Simply plug an Ethernet cable into both the SRX speaker and your computer. You can now control this individual speaker.
2. Wired connection
Connect any number of SRX speakers to a wired network router, either directly or via a switcher, and connect your
computer to that same network. You can now control all speakers on the network.
3. Wireless connection
Connect any number of SRX speakers to a wireless router either directly or via a switcher, and connect your computer or
tablet to that same network. You can now control all speakers on the network. Wireless connection is the only option for
tablet control via the SRX Connect app for iPad and Android tablets.
30
Networking
SRX800 Speakers can be used in Audio Architect version 1.60 and later. Audio Architect can be used to control all DSP parameters
of SRX800. Some functions, such as building and saving DSP presets in the speakers themselves, are only available through
Audio Architect. To download Audio Architect, visit http://www.jblpro.com/www/products/portable-market/srx800-series and select
the latest version of Audio Architect.
See the networking section above for instructions on connecting speakers to a network.
Some users will not see every speaker on the network the first time they connect new speakers. The most probable cause for this is
that two or more speakers are automatically set to the same HiQnet address when they are brand new. Each speaker must have its
own unique HiQnet address in order for the system to recognize them. If you aren’t seeing connected speakers on your network, you
can use HiQnet NetSetter to reset the HiQnet addresses of speakers on the system. NetSetter can be downloaded at
http://www.jblpro.com/www/products/portable-market/srx800-series.
Once your speakers are networked, they will show up in
the left hand panel on audio architect. A full list of Audio
Architect compatible Harman devices is also available for
creating shows while offline.
Drag speakers from the left hand panel into the room to start
working with them.
Double-click the speaker to bring up its control panel.
Double-click any of the DSP parameters to adjust those.
More in-depth instructions on using SRX with Audio Architect can be found at http://www.jblpro.com/www/products/portablemarket/srx800-series
31
Smart Device App
Introduction
For ease of use, SRX800 can be controlled via a proprietary app, SRX Connect, which is available for Android and iOS devices. It may
be found at http://www.jblpro.com/www/products/portable-market/srx800-series. Once the speakers are online and connected to the
network, connect your device to that same network and the app will find the speakers.
Drag and Drop speakers from the network into their configuration to get started.
Levels can be set directly from the configuration screen.
Selecting a group of speakers will allow users to adjust control
DSP and tune the system.
A full user’s guide for the app can be found online at http://www.jblpro.com/www/products/portable-market/srx800-series/app
32
Loudspeaker Placement and Suspension
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
IN
OUT
IN
OUT
IN
MASTER LEVEL
BACK
OUT
CH
CH
IN
OUT
IN
OUT
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
BACK
1
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
POWER
CH
MASTER LEVEL
BACK
IN
OUT
IN
OUT
BACK
1
CH
1
1
CH2
CH2
NETWORK
CH2
CH2
IN
NETWORK
OUT
NETWORK
LINK
NETWORK
LINK
DATA
LINK
LINK
DATA
DATA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
MADE IN MEXICO
Suspended
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
CH
MAIN MENU
MAIN MENU
? FILTERS
PRESET
? FILTERS
PRESET
ON
AUTO DIM
ON
AUTO DIM
OFF
AUTO SLEEP
OFF
AUTO POWER
SLEEP
METERS
METERS
POWER
IN
OUT
IN
OUT
IN
OUT
IN
BACKOUT
IN
OUT
NETWORK
BACK
BACK
CH
CH
1
1
1
CH2
CH2
IN
OUT
NETWORK
NETWORK
LINK
LINK
DATA
DATA
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MAIN MENU
MAIN MENU
? FILTERS
PRESET
? FILTERS
PRESET
ON
AUTO DIM
ON
AUTO DIM
OFF
AUTO SLEEP
OFF
AUTO POWER
SLEEP
METERS
METERS
POWER
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
1
1
OUT
OUT
OUT
BACK
BACK
MASTER LEVEL
MASTER LEVEL
LINK
BACK
LINK
DATA
NETWORK
DATA
MASTER LEVEL
NETWORK
LINK
DATA
NETWORK
MADE IN MEXICO
OUT
OUT
MADE IN MEXICO
MADE IN MEXICO
MAIN MENU
IN
OUT
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
IN
IN
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
IN
IN
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
BACK
Cardiod Subs
LINK
DATA
LINK
DATA
CH
BACK
NETWORK
LINK
DATA
CH
BACKOUT
OUT
NETWORK
CH2
OUT
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
IN
IN
1
CH2
IN
CH
OUT
CH
1
CH2
LINK
DATA
CH2
IN
BACK
NETWORK
MASTER LEVEL
OUT
BACK
OUT
IN
MASTER LEVEL
IN
1
CH2
LINK
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
CH
MASTER LEVEL
MASTER LEVEL
MASTER LEVEL
BACK
NETWORK
DATA
MADE IN MEXICO
NETWORK
OUT
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
LINK
OUT
CH
CH
CH2
LINK
DATA
DATA
IN
IN
MAIN MENU
MAIN MENU
PRESET
? FILTERS
PRESET
? FILTERS
AUTO DIM
ON
AUTO DIM
ON
AUTO SLEEP
OFF
AUTO SLEEP
OFF
POWER
METERS
METERS
POWER
MASTER LEVEL
BACK
NETWORK
MADE IN MEXICO
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
OUT
OUT
OUT
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
IN
CH
CH2
LINK
DATA
1
IN
IN
BACK
NETWORK
MADE IN MEXICO
NETWORK
OUT
MADE IN MEXICO
OUT
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
CH2
MASTER LEVEL
IN
IN
1
CH2
LINK
DATA
MADE IN MEXICO
OUT
Stacked Subs
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
BACK
NETWORK
LINK
DATA
OUT
OUT
NETWORK
MADE IN MEXICO
MADE IN MEXICO
BACKOUT
IN
CH
OUT
OUT
IN
1
CH2
IN
POWER
OUT
CH
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
CH
CH
CH2
LINK
DATA
CH2
IN
BACK
NETWORK
MADE IN MEXICO
IN
OUT
IN
OUT
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
IN
MASTER LEVEL
MASTER LEVEL
MASTER LEVEL
CH
CH2
LINK
DATA
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
BACK
NETWORK
MADE IN MEXICO
IN
OUT
1
OUT
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
CH
CH2
LINK
DATA
CH
IN
BACK
NETWORK
MADE IN MEXICO
-- Standing (SRX812P, SRX815P, SR
-- Standing (SRX812P,--SRX815P,
SRX835P) SRX815P)
Monitor (SRX812P,
-- Monitor (SRX812P,--SRX815P)
Pole Mounted (SRX12P, SRX815
-- Pole Mounted (SRX12P,
-- SubSRX815P,
MountedSRX835P)
(SRX812P, SRX815
-- Sub Mounted (SRX812P,
SRX815P,
SRX835P)SRX815P,
-- Suspended
(SRX812P,
-- Suspended (SRX812P,
SRX815P,
SRX835P)
-- Stacked
Subs
(SRX818SP, SRX82
-- Stacked Subs (SRX818SP,
SRX828SP)
-- Cardiod
Subs (SRX818SP, SRX82
-- Cardiod Subs (SRX818SP, SRX828SP)
CH2
OUT
LINK
Subs with 3-way splayed
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
OUT
IN
BACK
NETWORK
MADE IN MEXICO
MADE IN MEXICO
POWER
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
OUT
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
POWER
MASTER LEVEL
MASTER LEVEL
CH
CH2
OUT
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
IN
IN
1
CH2
LINK
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
-- Standing (SRX812P, SRX815P, SRX835P)
-- Monitor (SRX812P, SRX815P)
-- Pole Mounted (SRX12P, SRX815P, SRX835P)
-- Sub Mounted (SRX812P, SRX815P, SRX835P)
-- Suspended (SRX812P, SRX815P, SRX835P)
-- Stacked Subs (SRX818SP, SRX828SP)
-- Cardiod Subs (SRX818SP, SRX828SP)
MASTER LEVEL
MASTER LEVEL
MASTER LEVEL
CH
CH2
LINK
DATA
MASTER LEVEL
CH
BACK
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
BACK
NETWORK
MADE IN MEXICO
LINK
OUT
DATA
OUT
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
CH
CH2
LINK
DATA
NETWORK
MASTER LEVEL
IN
BACK
NETWORK
MADE IN MEXICO
BACK
OUT
LINK
OUT
IN
DATA
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MASTER LEVEL
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
MASTER LEVEL
CH
CH2
NETWORK
NETWORK
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
OUT
LINK
DATA
MADE IN MEXICO
IN
Pole Mount
-- --Standing
Standing(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
-- --Monitor
Monitor(SRX812P,
(SRX812P,SRX815P)
SRX815P)
-- --Pole
Mounted
(SRX12P,
Pole Mounted (SRX12P,SRX815P,
SRX815P,SRX835P)
SRX835P)
-- --Sub
SubMounted
Mounted(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
-- --Suspended
Suspended(SRX812P,
(SRX812P,SRX815P,
SRX815P,SRX835P)
SRX835P)
-- --Stacked
StackedSubs
Subs(SRX818SP,
(SRX818SP,SRX828SP)
SRX828SP)
-- --Cardiod
CardiodSubs
Subs(SRX818SP,
(SRX818SP,SRX828SP)
SRX828SP)
BACK
OUT
NETWORK
OUT
Tripod Stand
MASTER LEVEL
IN
MADE IN MEXICO
Monitor
BACK
1
CH2
OUT
OUT
OUT
OUT
IN
IN
IN
1
CH2
LINK
DATA
MADE IN MEXICO
MADE IN MEXICO
Floor Standing
MAIN MENU
? FILTERS
ON
OFF
AUTO SLEEP
METERS
POWER
BACK
NETWORK
IN
OUT
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
OUT
IN
LINK
DATA
IN
NETWORK
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
IN
OUT
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
OUT
CH2
IN
1
CH
IN
LINK
DATA
CH 1 MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
CH
CH2
NETWORK
1
BACK
PRESET
AUTO DIM
MASTER
LEVEL
MASTER LEVEL
MASTER LEVEL
OUT
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
IN
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
BACK
CH
CH2
MADE IN MEXICO
CH
OUT
CH2
OUT
IN
POWER
IN
1
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
POWER
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
MASTER LEVEL
POWER
CH
CH2
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
SERIAL NO.
JBL PROFESSIONALA HARMAN
NORTHRIDGE,
CA USA COMPANY DESIGNED AND ENGINEERED IN THE USA
INTERNATIONAL
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
Cardiod Subs Vertical
MAIN MENU
? FILTERS
PRESET
ON
AUTO DIM
OFF
AUTO SLEEP
METERS
POWER
IN
OUT
IN
OUT
MAIN MENU
PRESET
? FILTERS
AUTO DIM
ON
AUTO SLEEP
OFF
METERS
POWER
MASTER LEVEL
CH
MASTER LEVEL
BACK
1
CH
CH2
Standing
(SRX812P,
SRX815P,
SRX835P)
-- Standing
(SRX812P,
SRX815P,
----Standing
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
-- Standing
(SRX812P,
SRX815P,
-- Standing
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
Monitor
(SRX812P,
SRX815P)
-- Monitor
(SRX812P,
SRX815P)
----Monitor
(SRX812P,
SRX815P)
-- Monitor
(SRX812P,
SRX815P)
-- Monitor
(SRX812P,
SRX815P)
Pole
Mounted
(SRX12P,
SRX815P,
SRX835P)
Pole Mounted
(SRX12P,
----Mounted
Pole
SRX815P,
Mounted
SRX835P)
(SRX12P,
SRX815P,
SRX835P)
-- Pole--Mounted
(SRX12P,
-- Pole
SRX815P,
SRX835P)
(SRX12P,
SRX815P,
SRX835P)
Sub
Mounted
(SRX812P,
SRX815P,
SRX835P)
Sub Mounted
(SRX812P,
---Sub
SRX815P,
Mounted
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
-- Sub--Mounted
(SRX812P,
-- Sub
SRX815P,
Mounted
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
Suspended
(SRX812P,
SRX815P,
SRX835P)
-- Suspended
(SRX812P,
----SRX815P,
Suspended
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
-- Suspended
(SRX812P,
--SRX815P,
Suspended
SRX835P)
(SRX812P,
SRX815P,
SRX835P)
Stacked
Subs(SRX818SP,
(SRX818SP,
SRX828SP)
-- Stacked
Subs (SRX818SP,
----Stacked
SRX828SP)
SRX828SP)
-- Stacked
Subs (SRX818SP,
-- Stacked
SRX828SP)
Subs Subs
(SRX818SP,
SRX828SP)
Cardiod
Subs(SRX818SP,
(SRX818SP,
SRX828SP)
-- Cardiod
Subs (SRX818SP,
----Cardiod
SRX828SP)
SRX828SP)
-- Cardiod
Subs (SRX818SP,
-- Cardiod
SRX828SP)
Subs Subs
(SRX818SP,
SRX828SP)
IN
OUT
IN
OUT
BACK
1
CH2
NETWORK
NETWORK
The following guidelines will help you achieve optimum sound wherever you use your SRX800 loudspeakers. Only experienced professionals
should attempt to suspend the speakers. For permanent installation applications utilizing the M10 suspension points, JBL Professional
recommends the use of M10 x 1.5 thread pitch forged shoulder steel eyebolts with an 18-20mm threaded shaft, along with fender washers, rated
for overhead suspension. Users unfamiliar with safe rigging practices should not attempt to suspend loudspeakers. Please
-- Standing (SRX812P, SRX815P, SRX835P)
see https://www.jblpro.com/pub/technote/tn_v1n14.pdf for more information.
-- Monitor (SRX812P, SRX815P)
Aim the speakers to cover the whole audience
LINK
LINK
DATA
DATA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
SERIAL NO.
JBL PROFESSIONAL NORTHRIDGE, CA USA
A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO
MADE IN MEXICO
-- Pole Mounted (SRX12P, SRX815P, SRX835P)
-- Sub Mounted (SRX812P, SRX815P, SRX835P)
-- Suspended (SRX812P, SRX815P, SRX835P)
-- Stacked Subs (SRX818SP, SRX828SP)
-- Cardiod Subs (SRX818SP, SRX828SP)
For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in
the back of the audience will not receive the best quality sound. If the speakers are too high, people in the front of the audience will not receive
the best quality sound. Pay attention to the coverage pattern of each speaker and aim them so that the entire audience is within the coverage
pattern of the system. Utilize the downward angle pole cup on the SRX812P and SRX815P for closer audiences in smaller spaces.
Place the speakers between the microphones and the audience.
Feedback occurs when the microphones pick up sound from the speakers and “feed” the sound back through the sound system. If space is
limited, point the speakers away from the microphones to reduce feedback.
Locate the speakers away from turntables.
Low-frequency feedback occurs when the output of the speaker is picked up by the tone arm of the turntable and is re-amplified. A heavy, solid
turntable base and shock mounting can also reduce this type of feedback in DJ applications.
Use more speakers in large or highly reverberant spaces.
Spreading speakers throughout these spaces will produce much better sound than trying to compensate with loudness level or equalization. For
very long distances, the use of another set of speakers with time delay is recommended.
Stand speakers upright for PA - Lay speakers on their side for stage monitoring.
Use the full range speakers in upright stance for even coverage over a wide area. SRX815P and SRX812P speakers are also designed with a
slanted position for stage monitoring applications. Rest the speaker on the side with rubber feet for use as a stage monitor. Two SRX835Ps can
be splayed side by side for wide coverage for large audiences. Simply stand them so that their inside side panels meet. This configuration is ideal
atop an SRX828SP subwoofer.
33
TroubleShooting
Symptom
Likely Cause
What to do
No sound
Speaker not connected
to active AC power
Verify that speaker is connected and that the circuit is on
Power not switched on
Switch on power and verify that power LED is on
Speaker power cable is faulty
or improperly connected.
• Re-seat the power cable at both ends.
• Substitute a known-good power cable
Signal source
(mixer, instrument, etc.)
is not sending.
• Check VU meters on the source mixer
• Verify that the tape or CD is playing.
• Use headphones to verify that the instrument is actually
sending an audio signal
Faulty cables and
connections
• Disconnect and re-seat signal cables.
• Replace suspected cable with a known-good cable
No sound with microphone
connected directly to the input.
Microphone requires
phantom power
The SRX800 does not supply phantom power. Switch to a dynamic
microphone, use a battery powered microphone (if possible),
use an external phantom power supply for condenser type microphones.
Signal sounds distorted and
very loud, PEAK light is lit
most of the time.
Excessive input signal, trying
to exceed the capabilities of
the speakers
• Reduce the output level of the source.
• Turn down the level controls on the speaker.
• Use additional SRX800 speakers.
Signal sounds distorted even at
moderate volumes, LIMIT light
is not lit.
Mixer or other source
is overdriven
Review the Owner’s Manual for your mixer and adjust controls as needed.
• Input sensitivity (gain)
• Channel faders
• Master faders Once this is done, review the instructions in the Quick
Start section of this guide.
Lots of hiss in the sound,
the mixer controls are at
very low settings.
Improper gain structure
• Make sure that the MIC/LINE switch is in the LINE (disengaged) position.
• Reduce the level settings at speaker. Review the Owner’s Manual for
your mixer and adjust controls as needed.
• Input sensitivity (gain)
• Channel faders
• Master faders
Noise or hiss heard at output.
Noisy source device
Disconnect the devices that are connected to your speaker one at a time.
If the noise goes away, the problem is with the source or the
connecting cable.
Improper A/C ground or
faulty equipment connected
to mixer input
Disconnect or mute channels one at a time to isolate the problem. Refer to
the owner’s manual of the faulty equipment for troubleshooting help.
Faulty cable between source
equipment and mixer
Substitute a known-good cable for the suspected faulty cable.
Improper A/C grounding,
ground loops
• ‘Lift’ the audio ground by using an XLR/F to XLR/M adapter on one end.
• Re-route audio cables away from AC power and lighting cables.
Excessively long
unbalanced cable run
• Use the balanced outputs (if available) of your mixer or source
equipment to drive your SRX800 speakers.
• Use a “DI” (direct injection) box to convert your unbalanced equipment
output to a balanced output.
Improper system gain
structure
Reduce the INPUT level controls and increase the output level of your
source devices.
No sound, speaker is connected
to working AC power but won’t
come on.
No sound. Speaker comes on.
Hum or Buzz that increases or
decreases when the mixer level
controls are moved.
Hum or Buzz
34
Warranty Information
The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the
date of the first consumer purchase. JBL amplifiers are warranted for three years from thedate of original purchase. Enclosures
and all other JBL products are warranted for two years from the date of original purchase.
Who Is Protected By This Warranty?
Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased
in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except
for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.)
The original dated bill of sale is presented whenever warranty service is required.
What Does The JBL Warranty Cover?
Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered:
Damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage
resulting from failure to follow instructions contained in your Instruction Manual; damage resulting from the performance of
repairs by some SRX800 not authorized by JBL; claims based upon any misrepresentations by the seller; any JBL product on
which the serial number has been defaced, modified or removed.
Who Pays For What?
JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the original shipping
cartons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the
next section of this warranty.
How To Obtain Warranty Performance
If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500
Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818/893-8411). We may direct you to an authorized JBL
Service Agency or ask you to send your unit to the factory for repair. Either way, you’ll need to present the original bill of sale to
establish the date of purchase. Please do not ship your JBL product to the factory without prior authorization. If transportation
of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you.
Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any
initial shipping charges. However, we will pay the return shipping charges if repairs are covered by the warranty.
Limitation of Implied Warranties
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.
EXCLUSION OF CERTAIN DAMAGES
JBL’S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL
NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE.
JBL Professional
8500 Balboa Blvd. Northridge, CA 91329 USA
35
Contact Information
Mailing Address:
JBL Professional
8500 Balboa Blvd.
Northridge, CA 91329
Shipping Address:
JBL Professional
8500 Balboa Blvd., Dock 15
Northridge, CA 91329
(Do not return product to this address without first obtaining prior authorization from JBL)
Customer Service:
Monday through Friday
8:00am -5:00pm
Pacific Coast Time in the U.S.A.
(800) 8JBLPRO (800.852.5776)
www.jblproservice.com
On The World Wide Web:
www.jblpro.com
Professional Contacts, Outside the USA:
Contact the JBL Professional Distributor in your area.
A complete list of JBL Professional international distributors is provided at our U.S.A. website: www.jblpro.com
36
37
Part Number: 5032132
03/15
8500 Balboa Boulevard Northridge, CA 91329 USA
www.jblpro.com