PORTABLE PERFORMANCE - All

PORTABLE PERFORMANCE
ANSUL® Stored Pressure Fire Extinguishers
READY FOR ACTION
WHEN YOU ARE.
Every year, cooking accidents, unattended
candles, electrical failures, careless smoking
and other incidents lead to fires that cost
businesses plenty. Although most start out
small in proportion, each unchecked fire carries
the potential to spread rapidly. The full line of
ANSUL® fire extinguishers gives you the power
to respond when the unexpected happens.
ANSUL fire extinguishers are UL and ULC listed,
USCG approved and comply with NFPA 10.
Powerful, portable and engineered to last,
people and industries trust their critical assets
to ANSUL fire extinguishers.
EASY TO OPERATE
n LISTED AND APPROVED
MULTIPLE EXTINGUISHING AGENT TYPES
TRAINING AVAILABLE AT THE WORLD-RENOWNED ANSUL FIRE SCHOOL
ECONOMICALLY PRICED n SIX-YEAR LIMITED WARRANTY
ANSUL SENTRY
HAND PORTABLE FIRE EXTINGUISHERS
®
®
The SENTRY® line of portable dry chemical, carbon dioxide and water stored pressure fire
extinguishers are made to fight the widest range of industrial and commercial fires in
even the tightest, most highly traveled areas.
Compact and lightweight, SENTRY extinguishers are made to rigorous ANSUL standards
of quality and craftsmanship. Each comes with a six-year limited warranty and includes
such standout features as seamless and butt-welded steel or high-strength aluminum
shell construction, tough exterior coatings, hydrotesting and leak testing and extruded
aluminum, brass or plated steel components. All are backed by the ANSUL worldwide
distributor network — now over 1,000 strong.
Within seconds, a SENTRY stored pressure fire extinguisher can well be the difference
between a quickly extinguished fire and an uncontrollable blaze.
SENTRY® DRY CHEMICAL
Ideally suited for protection of light, ordinary and extra-high hazards, SENTRY dry
chemical extinguishers are found virtually anywhere a general-purpose fire extinguisher
is needed, including auto repair facilities, schools, offices, warehouses and many more.
Seamless steel cylinders are MIG welded at the collars and bottom enclosures, then
polyester powder-coated and oven-cured for durability. Other extinguisher components
consist of long-lasting aluminum alloys and plated steel. Sizes range from 2.5 lb. (1.13 kg)
to 20 lb. (9.20 kg) agent capacity, with specific agents available to fight Class A, B or C fires.
SENTRY industrial dry chemical extinguishers are built to survive in harsh, corrosive
environments, such as chemical manufacturing and storage, and in marine environments.
Special features include zinc-rich primers for superior corrosion protection, chromeplated extruded brass valves, stainless steel handles and push levers, plated brass hose
couplings and ferrules, and a ring pin and chain assembly.
SENTRY® CARBON DIOXIDE
Designed to protect against Class B (flammable liquids and gases) and Class C
(energized electrical equipment) fires, SENTRY carbon dioxide extinguishers are well
suited for laboratories, areas with electronic equipment, municipal firefighting vehicles
and more. Available in one-piece, powder-coated steel or aluminum shells, SENTRY CO2
extinguishers are available in capacities ranging from 5 lb. (2.30 kg) to 20 lb. (9.20 kg).
SENTRY® WATER
Class A hazards don’t stand a chance against SENTRY water extinguishers. With an ample
2.5 gallon (9.46 L) capacity, they’re made to the same standards as the rest of the
SENTRY line. Butt-welded stainless steel shell construction assures long service life, while
stainless steel, brass and aluminum alloy components help eliminate corrosion.
ANSUL CLEANGUARD
FIRE EXTINGUISHERS
®
®
CLEANGUARD clean agent extinguishers answer the call for a product rated for Class A, B
and C fires, yet will not damage sensitive and irreplaceable materials, equipment and facilities.
Halon 1211 was replaced by DuPont FE-36 ® as an electrically nonconductive, environment friendly
extinguishing agent for computer centers, data/document storage areas, communications
facilities, hospital operating rooms, control rooms, electronics manufacturing, museums, art
galleries, laboratories and others. CLEANGUARD extinguishers leave no residue and require no
cleanup after discharge.
Available in agent capacities of 2.5 lb. (1.13 kg) to 13.25 lb. (6.00 kg), CLEANGUARD
extinguishers feature an effective discharge range of approximately 16 feet (4.9 m).
Standard CLEANGUARD extinguishers include a six-year limited warranty, are made of a
seamless, welded steel shell, 100% hydrotested and leak tested, coated in a tough polyester
urethane paint and include extruded aluminum valves, plated steel valve stems, steel pick-up
tubes and plated steel ring pins. Some models meet FAA Minimum Performance Standards
(MPS) for civilian and commercial aircraft and are approved by the United States Coast Guard.
CLEANGUARD non-magnetic extinguishers offer many of the same features as the
standard CLEANGUARD units, but are made for environments in which 100% nonmagnetic extinguishers are required, such as magnetic imaging rooms, semiconductor
fabrication facilities and similar applications.
ANSUL K-GUARD
KITCHEN-CLASS EXTINGUISHERS
®
®
The “Front Line of Fire Protection,” K-GUARD fire extinguishers are designed specifically
to fight some of the toughest fires of all—hot grease, cooking oil and fat fires in kitchens
and food-prep areas of restaurants, convenience stores, food courts, hospitals, school
cafeterias and others. Typical appliances that would benefit from K-GUARD protection
include fryers, griddles, ranges, broilers, char-broilers, woks and more.
Filled with 1.6 gallons (6.00 L) of proven ANSULEX® low pH liquid fire suppressant,
K-GUARD extinguishers quickly knock down flames, form a vapor-securing blanket and
cool surrounding surfaces. Finished in polished stainless steel, K-GUARD extinguishers are
listed by UL and ULC for “K” class fires and comply with NFPA 10. Effective discharge range
of approximately 10 feet (3.1 m).
Make ANSUL your exclusive fire protection brand throughout your business. From
automatic extinguishing systems and detection systems to a full range of wheeled and
portable extinguishers, no other fire protection brand can promise the full range of
solutions or the quality of ANSUL. Our products are supported by a worldwide network
of factory-trained distributors — the largest in the industry.
Choose to protect yourself with a name you know. Choose ANSUL.
Tyco Safety Products
One Stanton Street
Marinette, WI 54143-2542
800-862-6785 (United States, Canada)
715-735-7411 (International)
www.ansul.com
©2005 Ansul Incorporated n ANSUL, CLEANGUARD, ANSULEX, K-GUARD and SENTRY are trademarks of Ansul Incorporated or its affiliates.
FE-36 is a trademark of DuPont. Photographs and specifications within this brochure are for illustrative purposes only and are subject to change without notice.
Form No. F-2005041