Structural Metal Fabricators, Inc.

Structural Metal Fabricators, Inc.
1226 Little Gap Rd.
Palmerton, Pa. 18071
610-824-7000 office
610-824-7100 fax
[email protected]
www.smftruck.com
 Keyhole Tools,
Conventional Hole Tools
 Training
 Consulting
 Research &
Development
 Manufacturing
Date: 5/8/2014
Rev, E
1|Page
Thank you for your interest in KTS Inc.
Our motto is “we create solutions” if you
don’t see what you’re looking for, call us
and we will make it! We will also create a
process solution for your projects, or any
specific requirements.
We can:






Qualify your technicians
Do camera launches
Train
R & D projects
Meet all reasonable delivery dates
Design encapsulation molds
Our tools have one year warranty, and we
will repair & rebuild tools per request.
Thank you for your business!
2|Page
Leak Repairs
•
•
•
•
•
•
•
•
•
Anaerbic sealant injection for low-pressure cast iron joints
Encapsulation on low-pressure cast iron joints
Encapsulation of low-pressure service tees
Steel main pin-hole leaks with handi-band clamps
Steel main pin-hole leaks with full encirclement clamps up to 2nd
Encapsulation of mechanical couplings
Plastic valve cap (faulty) replacement
Encapsulation of medium pressure joints
Encapsulation of service tees
Service Renewals
•
•
•
•
With existing tap: steel main, w/plastic pipe and tee
With existing tap: cast iron main, w/plastic pipe and tee
Plastic mechanical tee on a plastic main
Mechanical strap-on tee on a main with a plastic service line
General Purpose Tools
•
•
•
•
•
•
Plastic service tee installation
Steel service tee replacement
Valve box maintenance, including replacement
Underground utility location
Tracer wire attachment
Custom water tools
3|Page
New Service Installations
•
•
•
•
•
•
•
Plastic mechanical tee on plastic main
Steel main; new tap, with punch-it tee
Plastic main with electro fusion tee
Cast iron main; new tap
Steel main with a strap style mechanical tee; steel service
Installation of Skinner service saddle on cast iron mains
Installation of saddle tees on steel & cast iron mains
Service Cut-Offs
•
•
•
•
•
Low-pressure service cutoff, steel pipe
Low-pressure service cutoff, plastic pipe
Medium pressure cutoff, steel pipe, tees with or without completion plugs, zero
blowing gas
Gas main camera inspection & infrastructure locations 2” through 12” mains
Elevated pressure cutoff & renews, tee removal & installation
Corrosion Control
•
•
•
•
•
Anode attachment
Corrosion test box installations
Install encapsulation style bags
Bonding wire attachment
Corrosion protection sleeves
Field Training – we will do infield training on the tools we sell
you so your technicians are
more productive more quickly!
4|Page
Heavy Duty – Drive
Tools & Accessories
6-Foot Drive Extension
P/N: KTS-HDD-001
Drive Tee Handle
P/N: KTS-HDD-003
3-Foot Drive Extension
P/N: KTS-HDD-002
Plug Wrench Insert
P/N’S:
KTS-HDD-012-3/4”
KTS-HDD-013-1”
KTS-HDD-014-1-1/4”
KTS-HDD-015-1-1/2”
KTS-HDD-016-2”
Plug Wrench Kit
¾” – 2”
P/N” LTS-HDD-006
Pipe Tee Extractor
P/N’S:
KTS-HDD-007-3/4”
KTS-HDD-008-1”
KTS-HDD-009-1-1/4”
KTS-HDD-010-1-1/2”
KTS-HDD-011-2”
5|Page
Heavy Duty – Drive
Tools & Accessories
Drive to Square dr.
¾” KTS-HDD-004
1” KTS-HDD-005
Wrench Cap Insert
P/N:
KTN-HDD-017-3/4”
KTS-HDD-018-1”
KTS-HDD-019-1-1/4”
Wrench Insert Holder
P/N: KTS-HDD-020
Drive Tee Socket
KTS-HDD-021-1”
KTS-HDD-022-1-1/4”
KTS-HDD-023-1-1/2”
Socket, Perfection Tee Install
P/N KTS-PTS-001
Drive Tee Socket
P/N’S:
KTS-HDD-024-3/4”
KTD-HDD-025-1”
KTS-HDD-026-1-1/4”
KTS-HDD-027-1-1/2”
KTS-HDD-028-2”
Extension Coupling
P/N: KTS-HDD-029
6|Page
Electro Fusion
Mechanical Bolt On the Tee Kit
P/N’S: KTS-MBT-001 – 2” TEE
KTS-MBT-002 – 4” TEE
KTS-MBT-003 – 6” TEE
Plastic Pipe Cleaner
P/N’S: KTS-PPCL-001 (1-1/4”)
KTS-PPCL-002 (2”)
Pipe Manipulator
P/N’S” LTS-PMAN-001
Jaw P/N’S:
KTS-PMH-001 – ½”
KTS-PMH-002 – 5/8”
KTS-PMH-003 – 7/8”
KTS-PMH-004 – 1 1/8”
KTS-PMH-005 – 1-1/4”
KTS-PMH-006 – 2”
KTS-PMH-007 – ¾”
Perfection Stab P/N’S:
KTS-PMH-008 – 1-1/4”
KTS-PMH-009 – 5/8”
KTS-PMH-010 – 1-1/8”
KTS-PMH-011 – ¾”
KTS-PMH-012 – 1”
KTS-PMH-013 – ½”
7|Page
General & Plastic
Grounding
Ratchet Beam Wrench
P/N:
KTS-RAB-001 Alum
KTS-RAB-002 Steel
Open End Wrench
P/N:
KTS-WAT-001 1-1/8”
KTS-WAT-002 1-3/16”
KTS-WAT-003 1-3/8”
KTS-WAT-004 1-1/2”
KTS-WAT-005 1-5/8”
KTS-WAT-006 1-3/4”
KTS-WAT-007 2”
KTS-WAT-008 3-3/4”
KTS-WAT-009 2”
KTS-WAT-010 1-1/4”
T-Drive Lock
P/N:
KTS-TDL-001
Grounding Tool
P/N:
PTS-GT-001
Plastic Pipe Cutter
P/N:
KTS-PPS-001 Inserts
KTS-PPC-002 CTS.
KTS-PPC-003 IPS ½”-2”
Mallet Tool 6’ handle
P/N:
KTS-MT-001
8|Page
General, Leak,
Charge
2” & 4” Handi Band attachment with
Spreader
KTS-HB24-001
Use with Pipe Manipulator
Bridge Bonding Clamp
KTS-BBC-001
Saddle Install Kit
KTS-SIK-001
Cadweld Charge no. 15
P/N:
KTS-CWLD-001
Hex Bits
KTS-HEXB-001
KTS-HEXB-002
KTS-HEXB-003
KTS-HEXB-004
KTS-HEXB-005
KTS-HEXB-006
KTS-HEXB-007
¼”
5/16”
½”
9/16”
3/8”
7/16”
5/8”
9|Page
Service Renew,
Terminations
Service Renew/Termination Kit
KTS-SRKT-001 - Keyhole
KTS-SRKT-002 - Conventional
Derivative Kits
KTS-SRKT-003-Tee
Elbow removal from main
KTS-CAMERA-001
Camera Launch Kit
Steel & CI
KTS-CAMERA-002
Plastic Mains
10 | P a g e
Service Renew,
Terminations
Derivative Kits
11 | P a g e
Service Renew,
Terminations
Derivative Kits
12 | P a g e
Camera Kits
Camera Launch – Steel, Cast Iron, Plastic
13 | P a g e
Air Tools
Pneumatic Saw
P/N:
KTS-SAW -001 Long Arm
KTS-SAW-002 Short Arm
Pneumatic Drill
P/N:
KTS-PDR-001 Long Arm
KTS-PDR-002 Short Arm
Pneumatic Needle Scaler
P/N:
KTS-PNS-001
Pneumatic Ratchet
P/N:
KTS-PRAT-001 – Light Weight
KTS-PRAT-002 – Heavy Duty
Pneumatic Air hammer
P/N:
KTS-AHAM-001
Pneumatic Impact
P/N:
KTS-IMPT-001
14 | P a g e
Air Tools
Pneumatic Grinder – 6” Wheels
P/N:
KTS-GRIND-001
Pneumatic Cutoff Tool
P/N:L
KTS-COT-001
Air Supplier Tool
P/N:
KTS-AST-001
½” Wire Wheel (3 Req’d)
P/N:
KTS-WWH-001
1” Unitized Wheel
P/N:
KTS-WWH-001
Pneumatic Grinder
P/N:
KTS-GRIND-002
4” Wheel
KTS-WWH-002 (1 Req’d)
Air Lance – Straight & Angle
P/N:
KTS-AISA-001
15 | P a g e
Anearobic
1/8” Brass Pipe Plug
P/N:
KTS-BPP-001
“R” Drill Bit Cobalt
P/N:
KTS-ANER-005
Sealant Nipple
P/N:
KTS-ASN-001
Tap, 1/8”
P/N:
KTS-ATAP-001
Tube, Fill, Boot
P/N:
KTS-BFT-001
Socket, 7/16” Custom
P/N:
KTS-SCKT-001
7/16” Long Handle
P/N:
KTS-SKT-001
Sliding T Handle
P/N:
KTS-STH-001
1/8” Pipe Plug Driver
P/N:
KTS-PPD-001
16 | P a g e
General
Conventional Hole Pipe Scraper
P/N:
KTS-LAPS-002
Sealant Injection Gun
P/N:
KTS-SIG-001
Long Arm Pipe Scraper
P/N:
KTS-LAPS-001
Pressure Leak Tester - Specify Tee Type
P/N:
KTS-PLT-001
½” Dr 90 Deg Ig Ratchet
P/N:
KTS-SWD-001
Pipe Reamer 2”
P/N:
KTS-PRM-001
Air/Water Lance
P/N:
KTS-WAL-001
Rock Rake
P/N:
KTS-RRK-001
17 | P a g e
General
Vise Wrench
P/N:
KTS-VWR-001
Normac Encapsulation Kit
P/N:
KTS-NEK-001
Grabbers 60”
P/N:
KTS-GBR-001
Bell Joint Gasket Spade
P/N:
KTS-BJGS-001
Long Finger Tool
P/N:
KTS-HHK-001
18 | P a g e
General, Hydraulic
Squeeze Off
Applicator Holder Attachment
P/N:
KTS-APPL-001
Chamfer Tool Holder
1-1/8 “ & 1-3/8”
Continental P/N:
KTS-CTH-001
Chamfer Tool Holder
½” & 1”
Perfection P/N:
KTS-CTH-002
Perfection Tee Cap
P/N:
KTS-PTC-001
Rubber Stopper
1-3/16” – 1-5/8”
P/N:
KTS-RST-001
19 | P a g e
Heavy Duty – Ratchet
& Accessories
RATCHET ACCESSORIES
SOCKET, ELBOW REMOVERS
¾” STREET – KTS-EBWR-001
1’ STREET – KTS-EBWR-002
1-1/4” STREET – KTS-EBWR-003
1-1/2” STREET – KTS-EBWR-004
2” STREET – KTS-EBWR-005
3/4” ELBOW – KTS-EBWR-006
1” ELBOW – KTS-EBWR-007
1-1/4” ELBOW – KTS-EBWR-008
1-1/2” ELBOW– KTS-EBWR-009
2” ELBOW – KTS-EBWR-010
¾” END CAP – KTS-SEC-075
1” END CAP– KTS-SEC-100
1-1/4” END CAP – KTS-SEC-125
1” MEULLER CAP – KTS-MRT-065
1-1/4” MUELLER CAP– KTS-MRT-066
1-1/2” MEULLER CAP – KTS-MRT-067
20 | P a g e
Custom Gear for
Short Action
Heavy Hex Ratchet
P/N:
KTS-HHR-002
For Conventional Hole
Heavy Hex Ratchet
P/N:
KTS-HHR-001
For Keyhole
ADAPTER-SQUARE DR.
KTS-SDA-050 - 1/2”
KTS-SDA-075 – ¾”
KTS-SDA-100 – 1”
RETAINER-KTS-SDA-002
(These items come with KTS-HHR-001 & 002)
21 | P a g e
Cathodic
Protection
Cathodic Protection Solid Shot tool – uses ca15plusf33s shot.
Can use as 4 foot or add extensions for deep key holes, 8 foot.
KTS-CPT-001
Cathodic Protection – Solid Shot Kit
P/N: KTS-CPT-FKIT
Includes: KTS-CPT-001 Kits, KTS-CPT-002 Shot, KTS-CASE-001 case,
KTS-SPD-001 Clean Spade, KTS-BRSH-001 Brush,
KTS-MOLD-001, Furnace Angled, KTS-MOLD0002 Furnace Flat
KTS-GRIND-001 Grinder, KTS-AST-001 Air Supply Tool
KTS-QRT-001 Quick Release Tool, KTS-ROL-001 Roller
22 | P a g e
General
Quick Release Tool
KTS-QRT-001 72”
KTS-QRT-002 96”
KTS-QRT-003 18”
Roller Attachment
KTS-ROL-001
Mirror Attachment
KTS-MIR-001
Utility Knife Attachment
KTS-UTK-001
90º Gas Tee Stopper
P/N’S:
KTS-GTS90-3/4”
KTS-GTS90-1”
KTS-GTS90-1/14”
KTS-GTS90-1-1/2”
KTS-GTS90-2”
90º Gas Tee Stopper
P/N’S:
KTS-GTSS-3/4”
KTS-GTSS-1”
KTS-GTSS-1/14”
KTS-GTSS-1-1/2”
KTS-GTSS-2
KIT KTS-GTS90-KIT
Kit KTS-GTSS-KIT
23 | P a g e
General
Soap Brush Attachment
KTS-SBSH-001
Sockets Central Tee’s
KTS-CTS-001
Custom Sockets Per Request
Pipe Mark Tool
KTS-PMT-001
Dresser Sockets
KTS-DRS-001 ¾”
KTS-DRS-001
1”
KTS-DRS-003 1-1/4”
KTS-DRS-004 1-1/2”
Socket Cao-Continental Tee
KTS-SCCT-001
Right Angle Magnet
KTS-RAM-001
24 | P a g e
Core
Accessories
Core Hole Guard
KTS-CHG-001 – 12”
KTS-CHG-002 – 18”
KTS-CHG-003 – 24”
Cover Plates – Heavy Duty
KTS-CPL-001 – 12”
KTS-CPL-002 – 18”
KTS-CPL-003 – 24”
Core band Shape Holder
KTS-CBSH-001 – 12”
KTS-CBSH-002 – 18”
KTS-CBSH-003 – 24”
Core Warming
KTS-CWARM-001 – 12”
KTS-CWARM-002 – 18”
KTS-CWARM-003 – 24”
Core Extraction Tool
KTS-CET-001 – 1-1/2:
KTS-CET-002 – 2-1/4”
OR Specify Size “
25 | P a g e
Core & Digging
Road Cutting Bit
KTS-RCD-001 – 12”
KTS-RCD-002 – 18”
KTS-RCD-003 – 24”
Clay Spade
KTS-CDS-001
Digging Head Assembly
KTS-DHA-001
Digging Hose
KTS-DHC-001 – 4” Clear
KTS-DHG-002 – 4” Gray
Gas Suction Spider
KTS-GSS-001
26 | P a g e
Digging,
Training Stands
Heavy Duty Bar Puller
Specify Size
KTS-BPULLI-001
Digging Tubes
KTS-ADT-001 – 5 Ft (Aluminum)
KTS-ADT-002 – 6 Ft (Aluminum)
KTS-ADT-003 – 7 Ft (Aluminum)
KTS-PVC-001 – 5 Ft (PVC Plastic)
KTS-PVC-002 – 6 Ft (PVC Plastic)
KTS-PVC-003 – 7 Ft (PVS Plastic)
Sand Blaster Kit
KTS-SBK-001
Nozzle, Hose, Wand, Connection
Training Stand
KTS-TSTAND-001, Single Keyhole
KTS-TSTAND-002, Double Keyhole
27 | P a g e
28 | P a g e