On-Site Flange Facing/Circular Milling

On-Site Flange Facing/Circular Milling

FLANGE FACING / CIRCULAR MILLING
Reduce downtime & spare flange costs with on-site repairs.
Advance CNC Machining offers flange facering for 1 to 120 inch (25 to 3050 mm) diameters and circular milling from
73.5 - 199 inches (1866.9 – 5054.6 mm). Our on-site machining capabilities include facing, milling, or both.
Our on-site machines offer us the ability to reface,
mill, bevel, square, counterbore, or cut end prep
configurations for welding.
Our on-site flange machining can cut your costs in
four ways:
- Reduces downtime
- Eliminates off-site machining costs
- Eliminates leak sealing procedures
- Reduces stock of replacement flange
Advance CNC Machining offers prompt,
responsive on-site machining services for your
critical flange repair needs.
See reverse side for
machining capabilities.
Quality on-site machining when tear-down
and down-time is not an option.
Contact one of our on-site specialists today:
Travis Hamilton 740-207-6987
Donald Trout 513-746-0534
Flange Facing Capabilities:
Facing Diameters
Milling Diameters
ID Mounting Diameters
OD Mounting Diameters
FF1000 Flange Facer
0 - 12 inches
(0 - 304.8 mm)
N/A
N/A
2 - 12 inches
(50.8 - 304.8 mm)
FF3000 Flange Facer
1.5 - 12 inches
(38.1 - 304.8 mm)
N/A
1.5 - 6.75 inches
(38.1 - 171.5 mm)
N/A
FF4000 Flange Facer
3 - 19 inches
(76.2 - 482.6 mm)
N/A
3 - 12.5 inches
(76.2 - 317.5 mm)
N/A
FF5000 Flange Facer
5 - 24 inches
(127 - 609.6 mm)
N/A
5 - 18 inches
(88.9 - 457.2 mm)
N/A
FF6200 Flange Facer
20 - 50 inches
(508 - 1270 mm)
N/A
20 - 50 inches
(508 - 1270 mm)
up to 50 inches
(up to 1270 mm)
FF7200 Flange Facer
30 - 72 inches
(762 - 1828.8 mm)
35 - 72 inches
(889 - 1828.8 mm)
30 - 72 inches
(762 - 1828.8 mm)
56.5 - 82.7 inches
(1435.1 - 2100.6 mm)
FF8200 Flange Facer
45 - 120 inches
(1143 - 3048 mm)
45 - 120 inches
(1143 - 3048 mm)
45 - 120 inches
(1143 - 3048 mm)
89.8 - 136.4 inches
(2280.9 - 3464.6 mm)
Circular Milling Capabilities:
CM6200 Circular Mill
ID Mounting Diameters
Milling Diameters
Min Turning Arm
Swing Diameter
Max Turning Arm
Swing Diameter
78.9 - 177.2 inches
(2004.1 - 4500.9 mm)
73.5 - 199 inches
(1866.9 - 5054.6 mm)
135.6 inches
(3444.2 mm)
197 inches
(5003.8 mm)
Contact one of our on-site specialists today:
Travis Hamilton 740-207-6987
Donald Trout 513-746-0534