Figure 2. Right. Schematic of TIR setup for immunoassay
Transcription
Figure 2. Right. Schematic of TIR setup for immunoassay
Application of Fluorescent Nanodiamonds for Detection of Molecular Binding H. Doan, J. Kimbal, T. Nguyen, D. Shumilov, S. Raut*, T. W. Zerda, B. P. Maliwal*, I. Gryczynski*, Z. Gryczynski Physics –Astronomy Department - Texas Christian University, * UNT Health Science Center, Fort Worth, Texas Abstract Total Internal Reflection Fluorescence (TRIF) for a long time has been utilized for detecting molecular binding to the dielectric (glass) surface. Highly enhanced and surface confined evanescent field excites fluorophores close to the surface (up to 100 nm) very effectivel and can be scattered by Nanoparticles. Recently developed new fluorescent probes, Fluorescent Nanodiamonds (FNDs) have excellent biocompatibility, almost perfect (~100%) quantum yield, infinite photostability, and long fluorescence lifetime. In addition diamond material has very high refracting index (n=2.37) resulting in very high scattering of diamond particle. These two attributes, fluorescence and scattering, offers new potential uses of FNDs particles as markers in biomedical assay applications. The study’s goal is to functionalize FNDs surface with various functional groups and attach such FNDs to various biomolecules. FNDs are small enough (5-100nm) to be bound to proteins or DNA molecules. By monitoring fluorescence and scattering of evanescent field we can monitor binding of FNDs labeled biomolecules to the activated glass surface. Because of unprecedented photostability of FNDs, we can use ratio between fluorescence and scattering signals to increase detection sensitivity. In our approach we will use FNDs for detecting two types of molecular binding: (1) Immunoassay – binding of FNDs labeled antigen to surface immobilized antibody, and (2) DNA hybridization binding FNDs labeled as DNA to the complementary strands immobilized to the glass surface. Introduction Development of fluorescent probes has been a subject of intense effort for many practical biomedical applications ranging from tracking of cellular processes like endocytosis and exocytosis to physiological markers detection and cancer diagnostics. Tens of fluorescence probes are developed every year to be used for proteins/DNA/RNA labeling, tissue imaging, but still after many years of significant effort we are still missing “perfect” probes. The best available fluorescent dyes may have high brightness but show short fluorescence lifetimes (typically only few nanoseconds or less that are difficult to separate from background), have low photostability (dramatically limiting the observation time), and exhibit significant blinking (severely perturbing practical single molecule applications). Fluorescent Nanodiamonds (FNDs) are new emerging probes with amazing fluorescent properties where point defects embedded in the diamond crystal lattice result in exceptional luminescent properties. The nitrogen-vacancy defects fluoresce in red or green. Fluorescent NDs in the strong evanescent field as shown in Figure 1 will: (1) significantly scatter the evanescent field to form the scattered light of the same frequency as the excitation light, and (2) be effectively excited and produce strong fluorescence signal. Both, scattering and fluorescence can be independently used for a very sensitive detection. Utilizing both processes simultaneously, in the form of a ratio metric detection, has a high potential to further improve detection sensitivity. Figure 2. Right. Schematic of TIR setup for immunoassay measurements. Left. Actual photography of the stage. Total Internal Reflection (TIR) To limit the background signal, excitations confined to a very small volume or to a thin slice are frequently utilized. Excitation with the evanescent field induced by the total internal reflection (TIR) is one of the most effective and frequently used approaches. It occurs when the angle of incidence is greater than the critical angle, θc=sin-1(n2/n1), see Figure 2(the photography in Figure 2 shows the home-build TIRF system stage). Then a wave penetrates the less dense medium [1]: E(x,z,t)=Eoexp(-z/d)exp[i(kxxn1sinθ1/n2 – ωt)] where kx=2p/l and d is the penetration depth d=l(n12sin2θ –n22)-1/2/2p. The disturbance propagates along the x direction as an evanescent wave. The y-direction is perpendicular to the xz plane of incidence. The TIR excitation has significant advantages when applied to samples deposited on a surface. The magnitude of the evanescent field decays rapidly in the z-direction and becomes negligible at a distance greater than ½ of the excitation wavelength, typically ~200 nm. In addition, the evanescent field is about 3 fold enhanced as compared to the impinging beam [2]. These properties of TIR highly suppress background allowing for sensitive detection in dense biological media, such as blood or serum. We realized that combining fluorescent NDs with enhanced evanescent excitation will bring many new advantages that can greatly improve detection sensitivity. New FNDs bring exceptional qualities to the fluorescence based detection. The most significant are excellent (almost perfect) photostability, high quantum yield (~100%), large Stoke’s shift, and low sensitivity to external conditions (solvent, pH, salt, etc). Another important feature of diamond particles is a very large refractive index and excellent scattering properties. Typically the presence of high scattering is considered a problem in fluorescence detection. But in view of NDs’ excellent fluorescent properties we realized that we could use scattering to our advantage. Using an evanescent type of illumination (the dark field illumination) nanodiamonds will scatter the excitation light and at the same time emit fluorescence signal at a considerably different wavelength. Since scattering of diamond particles is orders of magnitude stronger than that due to DNA or any biological macromolecules, the scattering signal from a thin layer sample will be dominated by scattering from NDs. Using both, scattering intensity at the excitation wavelength and fluorescence intensity at the emission. Application of Fluorescent Nanodiamonds for Detection of Molecular Binding H. Doan, J. Kimbal, T. Nguyen, D. Shumilov, S. Raut*, T. W. Zerda, B. P. Maliwal*, I. Gryczynski*, Z. Gryczynski Physics –Astronomy Department - Texas Christian University, * UNT Health Science Center, Fort Worth, Texas Preparation and Functionalization of NDs We have been testing different size of nanodimonds (from 5-125 nm) and their response in TIR evanescent field. By refluxing NDs in 1:1 mixture of concentrated H2SO4 : HNO3 for 24 Hr at 90 deg C and subsequently, in 0.1M NaOH for 2 Hr at 90 deg C and then in 0.1M HCl for 2 Hr at 90 deg C we were able to obtain first functionalized NDs. Washing extensively with water and centrifugation at 12000 rpm and drying allow us to obtain COOH covered NDs. This is manifested by greatly enhanced solubility. Figure 3 shows suspension of raw NDs and functionalized with COOH after 1 hour. Non functionalized NDs precipitate on the bottom while functionalized stay in the solution. Figure 3. Binding of FNDs to the Surface Scattering of NDs Scattering of NDs Scattering of NDs with Fluororescent Conclusion Recent efforts in the field of immunoassays and immunosensors have been directed toward smaller sample volumes, shorter assay times, cost reduction, simpler assay protocol, and most importantly high sensitivity. Different miniaturization methods based on dye labels and spatial resolution are exploited for fluorescence sensing. Presented TIRF based fluorescence detection takes advantage of recent development of new fluorescent nanodiamonds (FNDs). These probes will add to extra sensitivity, simplicity, and practicality of the detection; allowing ultrasensitive detection down to a single molecule (nanoparticle) level and enabling development of new type of simple detection devices for individual use by broader community. Future Works High photostability of FNDs and very high refractive index of diamond material will open new possibilities for utilizing new emerging technologies that take advantage of high field enhancement like surface plasmons resonance (SPR) technology and metal enhanced fluorescence (MEF). After testing developed NDs with TIR evanescent field we will test new probes with evanescent field generated by surface plasmons polaritrons excited in thin (~ 50 nm) metal film. Such evanescent field is known to be 20 – 30 folds stronger than evanescent field generated by TIR. This for example will make possible to develop DNA hybridization assay based on very limited number of DNA copies. Possible applications include genomics and forensic and investigative genetics. References 1. E. Hecht, Optics, Addison-Wesley, Reading, 1990 2. Axelrod, D., E.H. Hellen, R.M. Fulbright. Total internal reflection fluorescence. In: Topics in Fluorescence Spectroscopy. Vol. 3: Biochemical Applications, (Lakowicz, J.R., Ed.) Plenum Press, New York, 1992, pp. 289-343.