x series storage products and options

Transcription

X Series® Storage Reference Manual
TABLE OF CONTENTS
UNIT 1: INTRODUCTION ...................................................................................................... 1
X SERIES STORAGE REFERENCE MANUAL FOR CANVAS ............................................................................1
CANVAS DISCLAIMER .....................................................................................................................1
X SERIES STORAGE EXTENSION TAB ..................................................................................................1
MAIN SECTIONS OF THE X SERIES STORAGE TAB...................................................................................3
UNIT 2: X SERIES STORAGE PRODUCTS AND OPTIONS ...................................................... 5
PRODUCT / OPTION CHART .............................................................................................................5
SEQUENCE OF PRODUCTS / OPTIONS..................................................................................................5
Storage ........................................................................................................................................ 5
Casegoods.................................................................................................................................. 13
Pulls........................................................................................................................................... 23
Front Style ................................................................................................................................. 24
Schemes .................................................................................................................................... 25
Cabinet Material .......................................................................................................................... 28
Top Materials .............................................................................................................................. 29
Translucent Material .................................................................................................................... 30
UNIT 3: X SERIES STORAGE TIPS AND TRICKS ................................................................. 31
Table of Contents
Last Revised: September 2013
TOC 1
© 2013 Haworth, Inc.
UNIT 1: INTRODUCTION
TOPICS
X SERIES STORAGE REFERENCE MANUAL FOR CANVAS ............................................................................1
CANVAS DISCLAIMER .....................................................................................................................1
X SERIES STORAGE EXTENSION TAB ..................................................................................................1
MAIN SECTIONS OF THE X SERIES STORAGE TAB...................................................................................3
X Series Storage Reference Manual for Canvas
This reference manual shows how to specify Haworth product within Canvas. It contains information that
explains the X Series Storage products and features within the Canvas program. As you are planning and
designing within the Canvas program, keep in mind this manual must be used in conjunction with the following
document:
 Steel Casegoods / Files and Storage Price List (X Series Price List)
For additional CET Designer / Canvas information, see the following documents:
 Canvas Reference Manual
 CET Designer Reference Guide
Canvas Disclaimer
Canvas Software is intended solely as a conceptual specification tool. All SIF files, calculations, Bills
of Materials (BOMs), and specifications used within the tool should be verified by the dealership before
data entry. Canvas/Haworth shall not be responsible and/or be held accountable for any misuse of the
software, content, configurations, validations, or the output resulting from the information submitted. It
is the responsibility of the user to completely verify the parts specified, maintain a full understanding of
product applications, and understand the product limitations.
X Series Storage Extension Tab
The following page shows a screen shot of where to locate the X Series Storage extension tab:
UNIT 1: Introduction
1
X Series
Storage
X Series Storage Extension Tab
2
Once you click on the X Series Storage tab, you will see a main component tab with products and options for
the X Series Storage system. This component tab is shown on the following page and provides an overview of
what is included for the X Series Storage product line. Products included are storage units, casegoods, pulls, and
various material options.
Main Sections of the X Series Storage Tab
Within the X Series Storage component tab, the main sections are:
 Schemes: X Series Storage and X Series Casegoods
 Storage
 Casegoods
 Pulls
 Front Style
 Cabinet Material
 Top Materials
 Translucent Material
The following page shows the main sections within the X Series Storage component tab.
3
Schemes
Storage
Casegoods
Pulls
Front
Style
Cabinet
Material
Top
Materials
Translucent
Material
Haworth X Series Storage Tab
4
UNIT 2: X SERIES STORAGE PRODUCTS AND OPTIONS
TOPICS
PRODUCT / OPTION CHART .............................................................................................................5
SEQUENCE OF PRODUCTS / OPTIONS..................................................................................................5
Storage ........................................................................................................................................ 5
Casegoods.................................................................................................................................. 13
Pulls........................................................................................................................................... 23
Front Style ................................................................................................................................. 24
Schemes .................................................................................................................................... 25
Cabinet Material .......................................................................................................................... 28
Top Materials .............................................................................................................................. 29
Translucent Material .................................................................................................................... 30
Product / Option Chart
The Product / Option Chart is a detailed description of all products and options within the X Series Storage
component tab. The chart includes columns for the following features:
 Canvas Button: On-screen Canvas button for each product or option
 Product Name: Haworth product name
 Description / How to Use: Description of the product / How is the product or option used
 Gray Input Box / Green Edit Box: Text boxes showing choices that can be made for each product
or option
Sequence of Products / Options
The Product / Option Chart follows the sequence of TOPICS listed above.
Storage
In the Storage section, you will find products and options to plan storage components within your
workstation. The variety of products available offers planning flexibility along with multiple function
and aesthetic options. The Storage section includes pedestals, lateral files, bookcases, combination
units, personal storage towers, storage cabinets, and wardrobes.
Storage Tab
Unit 2: X Series Storage Products and Options
5
X Series – Storage
Canvas Button
Product
Name
Mobile
Pedestals
JPMH, JPMJ,
and JPMA
(18", 24", and
30" deep)
2 - 3 Drawers
Description / How to Use
This 15"-wide mobile pedestal has
three depths and numerous drawer
layouts. It has a steel case, casters,
and a finished back and top.
From the Gray Input Box, make the
following application selections:

Depth

Drawer Layout

Tug: Includes a handle for
moving the pedestal.

Cushion: Not available on 29"deep pedestal.
Gray Input Boxes / Green Edit Boxes
For 17"- and 23"-Deep Pedestals
For 29"-Deep Pedestal
Once the product is placed, you can
make changes from the Green Edit
Box.
Suspended
Pedestals
JPHH, JPHJ,
and JPHA
(18" and 24"
deep)
2 - 3 Drawers
This 15"-wide suspended pedestal has
two depths, numerous drawer
layouts, and a steel case.

Depth

Drawer Layout
Box.
Attached
Pedestals
JPAH and JPAJ
(18", 24", and
30" deep)
2 - 3 Drawers
This 15"-wide, 15 ½"-high pedestal
attaches under a worksurface and
also sits on the floor. It has three
depths, several drawer layouts, a
steel case, and glides.

Depth

Drawer Layout
Box.
6
Canvas Button
Product
Name
Lateral Files
JLPD
(30", 36", and
41" width)
2 - 5 High
This lateral file can be used
freestanding or attached under a
worksurface.

Height

Width

Legs

Counterweight

Inset: Standard depth is 18 3/4".
Inset depth is 18".
Leg Option
Counterweight Option
Once the product is placed, make the
following changes or selections from
the Green Edit Box:

Height

Counterweight

Inset

Common/File Top
Common/File Top Options
Lateral File
Bench
Bookcases
JBCS
(30", 36", and
41" width)
2 – 5 High
This 30"-wide lateral file has a 12"high case with one lateral file drawer.
It has a hinged, cushioned lid;
translucent front; and four legs.
No Input or Edit Boxes
This 14"-deep bookcase has
adjustable shelves and glides.

Height

Width

Legs: Only available on 30"-wide
2-, 3-, or 4-high bookcases.
For 29.88" Width / 2-, 3-, or 4-High Only
change the Height in the Green Edit
Box.
7
Canvas Button
Product
Name
Combination
Units
This combination unit can be used
freestanding or attached under a
worksurface. It is 27 1/2" high, 18
3/4" deep, and 27 7/8" wide. These
units include configurations with open
shelves, box and file drawers, lateral
file drawers, and door units.

Layout: Specify as follows:
o Open Shelf: One open
shelf and one lateral file
drawer.
o F/B/B/Lat:
File/box/box drawers
and one lateral file
drawer.
o Door/B/B/F: Door unit
left; box/box/file right.
o Door/F/F/: Door unit
left; file/file right.
o B/B/F/Lat:
Box/box/file drawers
and one lateral file
drawer.
o B/B/F/Door:
Box/box/file left; door
right.
o F/F/Door: File/file left;
door right.

Legs: Only available on the Open
Shelf unit.

Touch Latch: Only available on
units with Doors.
Box.
8
Canvas Button
Product
Name
Combination
Unit
JCPV, JCPY,
and JCPX
(30", 36", and
42" width)
3 – 5 High
This freestanding combination unit is
18 3/4" deep. The units include one
or more lateral file drawers and an
upper door unit.

Height

Width

Drawers: Select for 2-high unit
only.

Door Type

Touch Latch
For 1-High Unit
For 2-High Unit
Box.
9
Canvas Button
Product
Name
Personal
Storage
Towers
This storage tower is 23" deep and
24" wide. It is available in a variety of
storage component layouts.
2 - 6 High

Height

Drawer Layout

Valet Side

Storage/Bookcase: Not
available on the 2- or 3-high
storage towers.

Top

Translucent Valet

Touch Latch

Wood Front

Support: Only available on the
2-, 3-, and 4-high
Box.
10
Canvas Button
Product
Name
Storage
Cabinet
JSPY
(30", 36", and
42" width)
2 – 5 High
This storage cabinet is 18 3/4" deep.
It has 2 hinged doors, a shelf or
shelves, and adjustable glides.

Height
o 2 High: 27 1/2"
o 3 High: 39 1/2"
o 4 High: 51 1/2"
o 5 High: 63 1/2"

Width

Touch Latch
Box.
Wardrobe
JWPC
(30", 36", and
42" width)
4 – 5 High
This storage cabinet is 18 3/4" deep.
It has 2 hinged doors, a shelf, a coat
rod, and adjustable glides.

Height
o 4 High: 51 1/2"
o 5 High: 63 1/2"

Width

Touch Latch
Box.
Combination
Unit with
Valet
(30" and 42"
width)
5 High
This storage unit is 18 3/4" deep. It
has a valet cabinet on the left or right
side, a storage unit with door, a
combination of box and/or file
drawers, and adjustable glides.

Width

Drawer Layout

Pedestal Side

Touch Latch
For 29.88"-Wide Unit
For 41.88"-Wide Unit
Box.
11
Canvas Button
Product
Name
Remove
Canvas function to remove storage
components (any component within
the X Series Storage tab).
No Input/Edit Boxes
Click on the “X” icon and move to the
drawing area. Click on the storage
component(s) you want to remove.
12
Casegoods
In the Casegoods section, you will find worksurface and storage products and options. The Casegoods
section includes pedestal desks, shells, credenzas, bridges, wrap-around surfaces (with or without
pedestals), returns, convergents, vertical storage units, and task lighting.
Casegoods Tab
X Series – Casegoods
Canvas Button
Product
Name
Double
Pedestal Desk
This casegood has left and right steel
pedestals, painted or wood fronts,
and adjustable glides.

Executive: Worksurface top
overhangs on the front and sides.

Depth:
o Standard depths are 24"
and 30"
o Executive depths are 30"
and 36"

Width

Modesty

Surface

Front

Left Pedestal

Right Pedestal
For Standard Desk
For Executive Desk
Box.
13
Canvas Button
Product
Name
Single
Pedestal Desk
This casegood has a left or right steel
pedestal, a painted or wood front, and
adjustable glides.

Executive: Worksurface top
overhangs on the front and sides.

Depth:
and 30"
and 36"

Width

Modesty

Surface: For executive desk.

Front

Pedestal Side

Left or Right Pedestal
Configuration
For Standard Desk
For Executive Desk
Box.
Desk Shell
This 29"-high shell can accept an
attaching lateral file or storage unit. It
includes adjustable glides.

Executive: 6" overhang on
visitor’s side for conferencing.

Depth:
and 30"
and 36"

Width

Modesty
For Standard Desk
For Executive Desk
Box.
14
Canvas Button
Product
Name
Credenza
This 29"-high credenza is 24" wide
and is available in a combination of
lateral files, pedestals, and storage
units. It is used freestanding or can
be placed inside a desk shell.

Width

Touch Latch: For the Storage
Units only.

Drawer Layout
o 60" wide: 3 layouts.
o 66" wide: Layout is
File/File on each end
and storage unit in the
middle.
o 72" wide: 3 layouts.

Top/Front: Surface materials for
the top and file/storage unit
fronts.

Front Style: Choose this for
Painted fronts.

Wood Lockbar: Option for
Wood fronts.
For 60"-Wide Credenza
Box.
Bridge
This bridge connects two freestanding
X Series units and has a laminate or
wood surface.

Width

Modesty

Surface
From the Green Edit Box, make the

VSU Side
15
Canvas Button
Product
Name
Curved WrapAround
Extended
with Pedestal
This 29"-high casegood has a curved
wrap-around surface, a steel pedestal
on one end, and adjustable glides.
The top surface and pedestal front
can be laminate or wood. Attach this
product to an adjoining casegood.

Modesty

Surface: Laminate or Wood.

Pedestal Side

Front: Choose this for Painted
fronts.

Wood fronts.

Configuration
For Laminate Surface
For Wood Surface
Box.
Curved WrapAround
Extended
with Full End
Panel
This 29"-high laminate casegood has
a curved wrap-around surface, full
end panels, and adjustable glides.
This product is designed for use with
18"-deep pedestals. Attach this

Width

Modesty

Handed: When facing the inside
of the wrap-around, specify as
follows:
o Left: Longer width is on
the left-hand side.
o Right: Longer width is
on the right-hand side.
Box.
16
Canvas Button
Product
Name
Curved WrapAround
Extended
Transitional
with Pedestal
wrap-around surface, a steel pedestal
on one end, and adjustable glides.
The top surface and pedestal front
can be laminate or wood. Attach this

Modesty

Surface: Laminate or Wood.

Pedestal Side

fronts.

Wood fronts.

Configuration
For Wood Surface
Box.
Curved WrapAround
Extended
Transitional
with Full End
Panel
wrap-around laminate surface, full
end panels, and adjustable glides. It
is designed for use with 18"-deep
pedestals. Attach this product to an
adjoining casegood.

Width

Modesty

follows:
o Left: Longer width is on
the left-hand side.
o Right: Longer width is
Box.
17
Canvas Button
Product
Name
Return
(with
Pedestal)
This casegood has a left or right steel
pedestal, a laminate or wood surface,
and adjustable glides. It attaches to a
single pedestal desk, corner unit, or
convergent with end panel.

Width

Modesty

Surface

Wood fronts.

Pedestal Side

fronts.

Configuration
For Wood Surface

VSU Side: VSU is on the
opposite side of the pedestal.

VSU Application
18
Canvas Button
Product
Name
Return Case
This case has a laminate or wood
surface, full end panel on one side,
and adjustable glides. It attaches to a
single pedestal desk, corner unit, or
convergent with end panel. It can be
used with an 18"-deep mobile
pedestal.

Width

Modesty

Surface

of the return case, specify as
follows:
o Left: Full end panel is on
the left-hand side.
o Right: Full end panel is

Wood fronts.

VSU Side: VSU is on the
opposite side of the end panel.

VSU Application
Convergent
with End
Panel
This convergent surface has a
laminate or wood surface and full end
panel. It must attach to a bridge or
return.

Depth

Surface
Box.
19
Canvas Button
Product
Name
Curved WrapAround “D”
This curved surface with a convergent
end has a laminate or wood surface
and modesty panel. It must attach to
an adjoining casegood.

Length

Modesty

follows:
o Left: Convergent end is
extended on the lefthand side.
o Right: Convergent end
is extended on the righthand side.
Box.
Corner
This corner surface has a straight
edge across the corner, a laminate or
wood surface, a modesty panel, and
adjustable glides. Both sides must
attach to an adjoining casegood.

Width

Modesty
Box.
Curved WrapAround
Corner
This corner surface has a curved edge
across the corner, a laminate or wood
surface, a modesty panel, and
adjustable glides. Both sides must
attach to an adjoining casegood.

Width

Modesty
Box.
20
Canvas Button
Product
Name
Curved WrapAround
Extended
Corner
This 29"-high casegood has a wraparound laminate surface that extends
on one end and adjustable glides. It
has a curved edge across the corner.
The corner surface is designed for use
with 18"-deep pedestals. Attach this

Modesty

follows:
o Left: Extended corner is
on the left-hand side.
o Right: Extended corner
is on the right-hand
side.
Box.
Vertical
Storage Unit
This storage unit is 34" high and 14"
deep and mounts on a desk or
credenza top. The 48"- and 60"-wide
units have one tackboard; 66"- and
72"-wide units have two tackboards.

Width:
o 48"-wide units have one
door and a lock.
o 60"-, 66"-, and 72"-wide
units have two doors
and a lock.

Storage:
o Open Storage
o Closed Storage: Choose
laminate or wood flipper
door material.

Free Place: Canvas function to
place the unit freely within the
work space. When this box is
checked, Canvas will not take
into consideration the rules of
where this product can sit.
For Open Storage Option
For Closed Storage Option
Box.
21
Canvas Button
Product
Name
Task Light
This charcoal light provides task
lighting beneath shelves or overhead
storage units.
No Green Edit Box
22
Pulls
In the Pulls section, you will find several pull options to use on X Series Storage. There are a variety of
style, finish, and compatibility options. These pull options are shown below.
Pulls Tab
Canvas Button
Pull Name
Finish Selection
Metallic Finish
Non-metallic Finish
Matching Case Trim Pulls
Taper Pull
J-Pull
Integral Pull
Brushed Nickel Finish Pulls
Classic Pull
Crescent Pull
Linear Pull
23
Front Style
Use the Front Style feature to change the painted style pattern or to change your wood color.
Front Style Tab
X Series – Front Style
Canvas Button
Option
Name
Painted
Wood
Canvas button for choosing a solid
painted front or one of three
perforated front styles.
Click on the black arrow and choose
your wood material and color for the
front of your X Series storage
component.
Dialog Boxes
24
Schemes
In the Schemes section, you can select options, materials, and finishes for application to all or selected
X Series Storage products within your workstation. This saves time and creates consistency. Schemes
can be used and saved for:
 Specific clients and used for multiple installations
 Color/finish schemes
 Global changes
For additional information on creating and applying Schemes, see Unit 4a (Canvas, Working with
Haworth Furniture) in the CET Designer Reference Guide.
There are two Scheme options for X Series products:
 X Series Storage: Use when applying the same options and finishes to multiple storage
components or entire work spaces.
 X Series Casegoods: Use when applying the same options and finishes to multiple casegoods or
entire work spaces.
Schemes Tab
25
X Series Storage – Schemes
Canvas Button
Option
Name
Haworth
Scheme
Manager for X
Series
Storage
Dialog Boxes
Scheme Manager dialog box with
many options for X Series Storage
products.
In the Scheme Manager dialog box,
select the Properties for this
particular scheme (our example
shows a client scheme for ABC
Design). Once you have made your
selections, click Apply, and Save
your scheme.
Another scheme option is to save a
color/finish scheme. For example,
save a “Graphite” finish scheme.
Select the graphite finish Properties,
name the scheme, and click on Save.
These same finishes can be used for
multiple clients and projects.
26
X Series Storage – Schemes
Canvas Button
Option
Name
Haworth
Scheme
Manager for X
Series
Casegoods
Dialog Boxes
Scheme Manager dialog box with
many options for X Series Casegood
products.
In the Scheme Manager dialog box,
select the Properties for this
particular scheme (our example
shows a client scheme for ABC
Design). Once you have made your
selections, click Apply, and Save
your scheme.
Another scheme option is to save a
color/finish scheme. For example,
save a “Graphite” finish scheme.
Select the graphite finish Properties,
name the scheme, and click on Save.
These same finishes can be used for
multiple clients and projects.
27
Cabinet Material
In the Cabinet Material section, there are four material options that are primarily used for accent colors
on X Series Storage cabinets. These material options are shown below.
A
B
C
D
Cabinet Material Tab
X Series Storage – Cabinet Material
Canvas Button
Option
Name
A
Trim
B
Lock
C
Fabric
D
VSU Bracket
Dialog Box
Canvas functions to select various
materials and apply them to X Series
cabinets.
Click on the ellipsis ( ) to get a list of
materials and colors. Use this to select
or change the material and colors to
be applied. The Material Select box
lists choices for the type of material
you have selected.
Once a material and color are
selected, click on the black arrow
(
) to pick up this material and
apply it to surfaces in your drawing.
28
Top Materials
In the Top Materials section, there are four material options that are primarily used for accent colors
within your drawing. These material options are shown below.
A
B
C
D
Top Materials Tab
X Series Storage – Top Materials
Canvas Button
Option
Name
A
Wood
B
Laminate
C
Edge
D
Cushion
Fabric
Gray Input Boxes
Canvas functions to select various
materials and apply them to X Series
components.
materials and colors. Use this to select
or change the material and colors to
be applied. The Material Select box
lists choices for the type of material
you have selected.
Once a material and color are
(
apply it to additional surfaces.
29
Translucent Material
In the Translucent Material section, you can select an accent color or pattern to be used in your
drawing. An example of the translucent option is shown below.
Translucent Material Tab
X Series Storage – Translucent Material
Canvas Button
Option
Name
Translucent
Gray Input Boxes
Canvas function to select a
translucent material and apply it to X
Series components.
translucent colors and patterns. Use
this to select or change the color or
pattern to be applied. The Material
Select box lists translucent options.
Once the material and color are
(
apply it to additional surfaces.
30
UNIT 3: X SERIES STORAGE TIPS AND TRICKS
The following chart covers helpful tips as you navigate through the Canvas program and design with the X
Series Storage products.
Product
Tips and Tricks
X SERIES
STORAGE




Suspended
specified.
Suspended
Suspended
Suspended


Attached units must attach under a worksurface 20" or deeper.
Attached units are not for use with 18"-deep worksurfaces with knife edge.

Counterweight option recommended for files that are not ganged together or are not anchored to a
fixed object.
Credenza

Credenzas with overhang tops cannot accept a vertical storage unit.
Task Light

For use with 120 volt 60 hertz electrical systems only.
Suspended Pedestals
Combination Units
Combination Units
(JCPV, JCPY, JCPX)
30"-, 36"-, and 42"-wide
3 – 5 High
pedestals must attach under a worksurface equal to or deeper than the pedestal depth
pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES.
pedestals are not for use with steel casegoods.
pedestals are not for use with 18"-deep worksurfaces with knife edge.
X SERIES
CASEGOODS
Unit 3: X Series Storage Tips and Tricks
31

x series storage products and options

Transcription

Similar documents

Ruth - CgiCanada.org

send birthday wishes to a loved one

5 Gallery of Character Types

pdf

Details, Details - The Needle Works

Hand Tufted Thailand

Fredrix MEDALLION580IJ_spec09

15 Oct 2013.pmd

Fredrix 777VWR Vivid

nicola simbari - Wally Findlay Galleries