seatime prodiver

where time is crucial you need the....
seatime
PRODIVER
Here at Stowa we not only create beautiful timepieces that
are worn and treasured by our customers, we also provide
them with a watch that is practical, durable and designed to
do the job it was intended for.
With this in mind and the success of our robust seatime
sports watch series, we decided we wanted to go one step
further and produce the ultimate dive watch, a professional
dive watch for divers. To make sure we got this watch just
right we went to a designer who is not only a watch
enthusiast, but who is also a very experienced diver with
many years of experience.
The challenge was not only to create a watch that
performed under extreme conditions and fulfilled divers
needs, but also to create a beautiful watch that could be
worn everyday and would be treasured by it’s owner.
We like to think we have achieved this with our new seatime
PRODIVER series.
STANDARD PRODIVER SPEC
•
•
•
•
•
•
•
•
•
•
•
1000m / 3300ft depth rating
Swiss-made automatic heliumventil
German-made sandblasted
and brushed stainless steel 42mm case
Superluminova on dial markers, hands and bezel marker
Unidirectional rotating bezel
Heavy duty screw in springbars
Heavy duty brushed stainless steel bracelet with screw pins,
solid end pieces and wetsuit extender
Heavy duty rubber deployment strap
Swiss-made automatic movement (ETA 2824-2)
3.70mm thick sapphire crystal glass
Date window at 6 o'clock position
www.studio808.co.uk/prodiver
©2005 : Jorg Schauer, Stowa Watches - watch design by gregbottle
31mm
Screw down
crown
Heliumventil
Automatic helium
release valve
42mm
50mm
22mm
15mm
Heavy duty stainless steel
bracelet with screw pins
and solid end pieces
Heavy duty
screw in
spring-bar
pins
unidirectional
bezel with
superluminova
marker
Heavy stainless steel
case back with engraving on
Superluminova
or bright luminesce
www.studio808.co.uk/prodiver
©2005 : Jorg Schauer, Stowa Watches - watch design by gregbottle