general catalog

Transcription

general catalog
GENERAL CATALOG
EA
THE
US
DLY MAD
RS
OU
N
EI
PR
When you only want the best, we’ll be there.
A FO 60 Y
R
The VPI Story
Since day one, it’s about quality, service
and innovation
Whether you’re an architect, designer,
distributor, or installer, you can depend on
VPI to provide three important things:
1. Great flooring products
2. World-class service
3. Industry expertise and technical excellence
We’re known for the creation of the industry’s original static
control flooring— Conductile® and Statmate™— way back in
1949. We’re also known for precision and quality in all of our
products: flooring tile, wall base, rubber flooring, and accessories
to complete the job.
Through the years, we’ve become more than just a flooring vendor,
but a partner and consultant. Maybe that’s because we hold our
products up to levels of performance that exceed industry norms.
The same goes for our people—you’ll see it first-hand in our
service and knowledge.
Today, we continue to offer the industry’s best flooring products
and everything that goes with them: The best choices, options,
warranties, and service. From stringent testing procedures and
quality checks to incredible precision in the end product, it’s what
you expect, and what we demand.
So whether this is your first specification of VPI products
or if you’ve been counting on us for decades, one thing
remains true:
When you only want the best, we’ll be there.
2
Seeing Green
How a quality product that’s built to last is ultimately the best environmental choice
Just How Green Is Green? VPI Goes to the Next Level.
Our up-front focus on quality means our products are
durable and tough, with a very long life cycle in their
intended applications. The result? A diminished need
to extract new resources and expend energy in the
manufacture of replacement products.
It’s certainly no surprise that environmental concerns have
come to the forefront of virtually every aspect of modern
life. At VPI, we remain committed to this important
directive, and fully understand the role we play working
in partnership with you.
Our Facility: Setting the Standard
• We generate almost no waste for landfills (less than
2%). All product trim and rework is reused within
the product, other products, or used within other
manufacturing processes.
• We don’t use heavy metals in pigments or stabilizers.
• We meet all applicable guidelines of the State
of Wisconsin’s progressive environmental and
refuse laws.
• We recycle water used in the manufacturing process
in a closed-loop system.
• We use recycled packaging for our products,
containing up to 100% recycled content.
We also understand that environmental
responsibility is a complex subject, often
requiring us to consider many different
perspectives.
When manufacturers tout the benefits of
recycling, they often overlook the impact
of the recycling process: Energy is
consumed, waste is created, and additional
resources are used. Granted, this process may
use less energy and resources than creating new
products, but an overall negative impact on the
environment is often the result. So while recycling is
typically presented as an environmentally responsible
practice, there’s a bigger question: Isn’t continued use
of a high-quality product better than recycling?
Sustainability Is Paramount
Consider a typical paper coffee cup, one that’s made of
recycled material and is also recyclable. Unquestionably,
it offers sound environmental responsibility. But isn’t a
ceramic mug—one that can be used repeatedly for
decades—an even better environmental choice?
Preventing waste—not simply recycling waste—is the real
solution to a healthy planet. Unlike many flooring products
available today, our tile lasts decades, not just a few years.
And that means replacement and recycling isn’t required.
Instead, we offer sustainability, a solution that makes sense
from financial and environmental perspectives. Simply,
our belief is that while recycling is better than throwing
something away, the greenest solution is using a product
that lasts and lasts.
Our Products: Sustainability for the
Long Haul
• Durability and outstanding quality
provides a long life cycle, without the
need to use new products.
• No waxing requirements means no
environmental impact from waxing,
and no damage caused by corrosive
stripping.
• Most of our adhesives have zero to
very low emissions of Volatile Organic
Compounds (VOCs). (Please refer to
our website for specific details.)
Our Standards: More than Just a Promise
Year after year, we maintain our commitment to
strict eco-compatible manufacturing, packaging and
recycling programs. Unlike others, we’ve made sure
our compounds contain no asbestos, cadmium, CFCs,
lead or formaldehyde. Simply, at VPI, giving customers
eco-friendly options is our way of doing business.
Our Commitment to Air Quality: FloorScore
In an effort to maintain indoor air quality, the FloorScore
program tests and certifies flooring products for compliance
with indoor air quality emission requirements adopted
in California. Virtually every flooring substrate has been
tested, and those bearing the FloorScore seal have been
independently certified as compliant. We’re proud to feature
the FloorScore seal of approval on many of our products—
it helps everyone breathe a little easier.
3
Static Control Flooring
As the first-ever manufacturer of static control flooring, we bring
experience and insight no one else can match. Developed decades
ago and in continual refinement, Conductile® and Statmate™ are still
the premier static flooring solutions on the market. In fact, VPI
Static Control Tile installed over 60 years ago still performs to the
same specifications as the day it was installed, retaining its
conductive and dissipative properties indefinitely. For applications
that require electrostatic discharge protection and/or low outgassing
(like electronics assembly, health care, and clean rooms), VPI Static
Control Flooring is a perfect choice.
Features
Compliance
VPI tiles meet or exceed all federal, ASTM and ESD
Association specifications for electrical resistance. After
installation, a Certificate of ESD Compliance can also
be issued for complete peace of mind in the most
demanding and critical applications.
Lifetime “forever” electrical warranty
Our ESD tiles are guaranteed to work as long as the tile
is installed!
75-year wear warranty
VPI tiles are warranted for 75 years regarding failure
due to workmanship or materials. This is the longest
warranty in the industry for any resilient floor.
Top-quality materials
VPI ESD control tiles are made only from certified
high-quality materials to assure a lifetime of reliable
and consistent technical performance.
Superior physical resistance
Our ESD tiles can endure loads of up to 2,500 psi
offering unmatched durability. They offer a lifetime of
abrasive resistance to chipping and marring, unlike other
products with lower vinyl content.
than many other more expensive, lower quality “green
wash” products.
Ease of installation and a beautiful appearance
Conforming to subfloor irregularities without cracking
or breaking, our “Micro Squared” highly flexible tiles
are extremely easy to install. And after installation, the
appearance simply blossoms. In fact, many customers
choose our tiles when they don’t need static control—
just a great-looking floor that lasts a lifetime and
requires very little maintenance.
Variety of installation choices:
12 x 12 x 1⁄8
24 x 24 x 1⁄8
36 x 36 x 1⁄8
Pre-grooving available (24’s and 36’s only)
Access flooring tiles available
Adhesive is included
All orders include appropriate amounts of VPI #150
Conductive Epoxy Adhesive or VPI #160 Conductive
Acrylic Adhesive.
Extreme resistance to many chemicals
Including betadine, acids, strong alkalis, alcohols, aliphatic
solvents and a variety of organic and synthetic fats.
No copper strip grid required
The VPI system only requires a single two-foot copper
strip every 2,000 square feet to ensure complete
grounding. Other ESD systems require an extensive
grid system to be installed before tile installation.
Eco-consciousness
VPI tiles are the greenest resilient tiles on the market
today. Sustainable and earth friendly, VPI tiles create
less carbon foot printing through the product lifecycle
No wax requirements
Unlike other flooring tiles, our static control tiles do
not require wax or glaze to maintain their electrical
properties. No wax is also great for the environment.
Product Standards That Lead the Industry
MADE IN
THE USA
LEAD
TO
TOXIC
HEAVY
TAL
METAL
UV
RESISTANT
4
E
IC
21
10
9
T
ES
R
FO
R
IE
C
LA
G
N
AI
R
K
AC
BL
92
2
15
17
E
IT
H
W
T
IO
TR
PA
R
TE
IN
W
M
U
IN
AT
PL
16
Seamless
Installation
2
3
15
E
IT
H
W
E
N
BO
C
LO
U
D
Choose from 13 colors of
Seam Welding Bead to
complement our tile.
T
AN
PL
G
EG
ST
O
R
M
ROSE 905
93
LIGHT BROWN 904
30
LIGHT BLUE 909
BLACK 901
For static control flooring product
specifications and performance
properties, see pages 20–21.
WHITE 902
RUST 924
Note: Due to color variations in printing, please refer to
actual samples for accurate color.
SANDSTONE 913
DARK BROWN 914
OFF WHITE 912
LEED CREDITS
VPI Tile contributes towards:
IEQ Credit 4.1 – Low-emitting materials: VPI #150 and #160 adhesives – 0 VOC
IEQ Credit 4.3 – Low-emitting materials: VPI tile is FloorScore certified
MR Credits 4.1, 4.2: Recycled content: 10.4% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
JADE 918
GRAY 906
LIGHT GRAY 916
DARK GRAY 915
5
Static Control Flooring
With the same physical and installation properties, there are key differences
between VPI Conductile® and Statmate™ ESD tiles:
Conductive Tile
Static Dissipative Tile
• 25,000 to 1,000,000 ohms resistance
• Fastest static decay—up to 20 times
faster than static dissipative tiles
• For use with highly sensitive
equipment and critical applications
• Suited for printed circuit and chip
manufacturing
• 2,500 psi load rating
• 1,000,000 to 100,000,000 ohms
resistance
• Slower static decay—up to 20 times
slower than conductive tiles
• Not for use with highly sensitive
equipment and critical applications
• Not suited for uses with exposed
circuits or chips
• 2,500 psi load rating
Conductile® vs. Statmate™: Which Is the Right Tile for You?
To understand the differences and the choices between static
dissipative and conductive tiles, it’s important to understand
the history of static control flooring.
Originally, VPI invented “no-wax” static control tile back in
the late 1940s, primarily as a spark arresting floor. Although
the newly invented floor material reduced static electricity,
the real focus was on preventing sparking in hospital
operating rooms.
Equally important, in the 1950’s and even into the 1960’s,
many buildings were not properly grounded. To provide
protection against shock hazards, we evolved our static
control tile into no-wax “static dissipative” tile, branded
as STATMATE™. This new material quickly became a
standard in many facilities and is frequently used today in
some high-voltage applications and/or where inadequate
grounding could be a concern.
Then a new challenge emerged. As high-tech electronics
manufacturing became common, smaller and faster
systems were more susceptible to damage caused by
static electricity—and thus required much greater protection.
For the first time, static levels imperceptible to humans could
actually cause significant problems for sensitive electronics.
The hallmark “shock” we traditionally felt was far and above
the levels that would damage and disrupt electronics
manufacturing.
Continuing its mission as an industry leader, VPI addressed
this issue by inventing no-wax conductive tiles, branded as
CONDUCTILE®. With up to 20 times greater protection
than all other waxed static dissipative tile, impregnated tiles
or poured static dissipative options, CONDUCTILE® set the
standard in the industry, and continues to do so today.
So which one to choose? Static dissipative tiles are
recommended where electronic equipment is operated—
for example, in control rooms or computer server rooms.
Alternatively, conductive flooring is recommended for areas
where electronic components (such as circuit boards) are
either serviced or manufactured.
While there are some limited exceptions, ESD flooring
experts increasingly support the viewpoint that conductive
flooring can and should be used everywhere.
In today’s world, highly sensitive components need more
protection, electronic equipment is much better insulated
and grounded than it was in the past, and a flooring
investment should be preserved well into the future.
Therefore, CONDUCTILE® is the optimal solution in
most applications.
6
Wall Base
When you want a product with a level of quality that
assures your creative vision will last a lifetime—
whether installed in an office, conference room,
classroom or hallway—choose VPI Wall Base.
With superb flexibility, scratch and scuff resistance,
stringent specifications, quality control checkpoints
throughout each phase of production, and superior
performance properties that meet the requirements of
designers and installers, our Wall Base products meet
virtually any challenge.
LEED CREDITS
VPI Wall Base contributes towards:
IEQ Credit 4.1 – Low-emitting materials: VPI #600 adhesive – 0 VOC
IEQ Credit 4.3 – Low-emitting materials: VPI Wall Base is FloorScore certified
MR Credits 4.1, 4.2: Recycled content: 32% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
Features
No color drift/no dye lots
Enjoy stable color consistency over time,
especially important when installing
preformed outside corners
No lead or heavy metals
Ribbed back design
For more secure adhesion
Porous backing
Allows quicker, better adhesion
UV resistance
Won’t fade like some other products
on the market
Tougher surface finishes
Looks better longer because of
thicker, denser pigmentation
Quick and easy installation
With superior flexibility, our Wall Base
is quick and easy to install
Matching outside corners
Unlike other brands, our outside corners
are guaranteed to match every time
Micro-Squared™ “up” cuts
Minimize joint visibility
For Wall Base product specifications
and performance properties see page 22.
Consistent height and toe dimensions
Assures premium and professional
appearance
As a standard VPI
design feature, the
reinforced toe provides
additional strength for
tougher applications.
Reinforced cove
For greater durability in the toughest
applications
Compliance with ASTM standards...
for flame spread (ASTM E84), smoke
density and development (ASTM E662),
critical radiant flux (ASTM E648), and
hardness, dimensional stability and
chemical resistance (ASTM F1861)
Specifics
Rubber (TPR)
1
⁄8" Gauge
Vinyl
1
⁄8" and .080" Gauge
Rolls or Lengths
21⁄2", 4", or 6" heights
Cove (Toe) or Straight (Toeless)
To ease installation
and ensure a snug
fit from top to toe,
VPI Wall Base has a
ribbed back forming
a mechanical key for
positive and lasting
adhesion.
Product Standards That Lead the Industry
MADE IN
THE USA
LEAD
TO
TOXIC
HEAVY
TAL
METAL
UV
Serving the
Flooring Industry
for over
RESISTANT
7
60
YEARS
FO
R
ES
T
8
M
IN
T
LE
AF
IV
Y
G
R
EE
N
G
R
EE
N
38
89
34
31
16
93
O
LI
VE
D
U
SK
TE
AL
G
RO
VE
TE
AL
LI
G
H
T
PA
TR
IO
T
ST
O
R
M
PI
C
KL
E
37
15
17
56
13
69
N
IG
H
T
BL
U
E
BL
U
E
09
11
08
21
29
M
ED
IT
ER
R
BL AN
U EA
E N
12
AU
RO
R
A
M
O
RO
C
C
AN
RO
YA
L
IN
KW
EL
L
AR
C
TI
C
BU
FF
AL
O
FI
EL
D
G
R
AY
N
IC
KE
L
ST
O
N
E
LO
N
D
O
N
06
26
98
04
33
03
AL
LO
Y
SL
AT
E
PE
W
TE
R
C
H
AR
C
O
AL
G
R
AY
SA
BL
E
D
O
VE
SI
LV
ER
FO
G
G
R
AY
LO
N
D
O
N
TU
D
O
R
C
H
AR
C
O
AL
G
R
AP
H
IT
E
46
36
05
86
66
35
DA
RT
M
O
O
R
SH
AL
E
JE
T
02
01
•
•
•
•
•
•
M
AR
IN
ER
SP
R
IN
G
C
YP
R
ES
S
R
AI
N
Wall Base
All Colors Available in:
TPR (Rubber) or Vinyl
Heights of 21⁄2", 4" or 6"
Cove (toe) or Straight (toeless)
4' lengths or 96', 120' and 160' rolls
1
⁄8" Gauge (TPR Rubber or Vinyl)
.080" Gauge (Vinyl)
LA
IT
9
PO
LA
R
IS
M
IL
KW
EE
D
PA
PY
RU
S
SA
H
AR
A
FA
W
N
SH
EL
L
AU
EG
G
C
AF
É
67
32
74
23
97
49
48
M
U
ST
AR
D
R
AY
SE
ED
D
IJ
O
N
SU
N
TA
N
C
O
R
D
IT
E
SM
O
KE
79
47
45
60
42
63
C
AM
EL
BA
C
K
70
CH
ES
TN
UT
N
U
T
C
H
AI
R
TA
U
PE
TO
AS
T
SP
IC
E
BR
O
W
N
C
LU
B
TE
R
R
AC
O
TT
A
RO
AS
TE
D
14
50
43
57
41
80
39
U
M
BE
R
BR
O
W
N
C
AP
PU
C
C
IN
O
C
H
O
C
O
LA
TE
BU
R
N
T
BL
AC
K
90
64
54
94
40
24
22
SA
N
D
ST
O
N
E
M
IS
T
TA
U
PE
TA
U
PE
M
AN
H
AT
TA
N
BE
R
RY
R
AI
SI
N
C
RU
SH
C
LA
YM
O
R
E
C
O
AT
RO
U
G
E
R
ED
RU
BY
PL
U
M
W
IN
E
AL
SA
TI
AN
LA
VE
N
D
ER
27
51
25
59
20
83
19
M
IN
T
O
LI
VE
EG
G
PL
AN
T
LI
G
H
T
10
30
92
Super Match Colors are color
coordinated and available in
rubber tile, rubber treads, wall
base and accessories.
For Wall Base product specifications
and performance properties see page 22.
Note: Due to color variations in printing, please refer to actual samples for accurate color.
Rubber Flooring
VPI Decorative Rolled Rubber Flooring is as easy on the
eye as it is to install. With an array of calming color tones
and patterns, you can address the critical applications of
sensitive medical spaces. And since there are fewer seams
for bacteria and microbes to gather and grow, it’s a perfect
choice for healthcare facilities and daycare operations.
From safety perspectives, we’ve got you covered:
83
2
80
7
FA
W
N
SP
O
TT
ED
82
1
R
ID
G
E
PE
AC
H
C
R
EA
M
Y
SP
AR
KL
IN
G
SU
N
82
8
82
7
82
6
FA
D
ED
ST
O
N
E
G
LO
RY
82
0
SP
IC
Y
G
AR
D
EN
BR
O
W
N
PA
TH
81
4
81
3
BL
EN
D
ED
ST
O
N
E
80
6
80
5
DA
Y
SP
R
IN
G
G
R
EE
N
M
IS
TY
PE
R
IW
IN
KL
E
DA
Y
82
5
R
AI
N
Y
C
LO
U
DY
DA
Y
81
8
81
9
RO
C
K
IS
LA
N
D
81
2
81
1
Q
UA
RT
ZI
TE
80
4
TH
IC
K
RO
U
G
H
81
7
82
4
83
1
FR
ES
H
LI
LA
C
S
83
0
G
R
AP
ES
C
RU
SH
ED
BA
R
K
SA
N
D
SU
R
PR
IS
E
TE
AL
SE
AW
EE
D
82
3
SP
AR
KL
IN
G
W
AT
ER
N
IG
H
T
ST
AR
RY
82
2
82
9
SK
IN
SO
FT
FO
G
80
3
81
0
BU
R
N
T
SO
FT
81
6
SA
N
DY
81
5
BL
U
E
G
R
EE
N
SI
EN
N
A
80
2
TA
U
PE
BE
AC
H
80
8
80
9
M
IX
ED
G
R
AP
H
IT
E
80
1
BL
AC
K
M
AJ
ES
TI
C
H
EA
VE
N
LY
M
ID
N
IG
H
T
M
AR
SH
Y
Decorative Rolled Flooring
Note:: Due to color variations in printing, please refer
to actual samples for accurate color.
Our rubber flooring is void of harmful asbestos, cadmium,
CFCs, formaldehyde or halogens. In addition to pleasing
aesthetics, 1200 psi load resistance ensures remarkable
durability and toughness for years and years. Comes in
rolls approximately 60" x 50', with matching rubber
welding bead available separately.
10
70
1
AR
AB
IA
G
R
AY
O
F
R
AI
N
SE
A
TU
RT
LE
73
1
73
6
SE
A
M
IS
T
C
LO
U
D
72
6
72
7
O
R
AN
G
E
SA
N
TA
BL
O
SS
O
M
FE
72
0
71
0
SA
N
D
72
5
BR
EE
ZE
SM
O
KY
FL
AN
N
EL
70
0
34
70
9
M
IL
KW
EE
D
72
4
BE
IG
E
AL
M
O
N
D
C
U
C
U
M
BE
R
73
0
G
R
EE
N
C
AL
M
SE
A
G
R
EE
N
M
AR
IN
ER
70
7
KH
AK
I
D
ES
ER
T
72
3
RO
AD
RO
C
KY
72
9
M
O
O
N
BL
U
E
BL
U
E
M
O
RO
C
C
AN
70
6
G
R
AY
72
2
W
H
EA
T
W
IN
TE
R
FA
LL
S
11
05
FO
G
LO
N
D
O
N
BR
U
SH
C
EL
TI
C
72
1
72
8
R
ED
W
O
O
D
Q
UA
RT
Z
70
5
C
H
AR
C
O
AL
SL
AT
E
SH
AL
E
BL
U
E
70
2
DA
RT
M
O
O
R
M
YS
TI
C
M
IS
TY
Decorative Slate
03
02
Rubber Flooring
VPI Decorative Slate Flooring is the perfect choice for hightraffic walkways in healthcare facilities, schools, offices and
lobbies. With low-noise characteristics, fire resistance, and
low-smoke density, our ADA-compliant rubber flooring gives
you the performance you need while maintaining the design
integrity you desire.
For Rubber Flooring product specifications and
performance properties see page 23–24.
Slate
0.125" (3.17 mm)
Micro-Squared™
1713⁄ 16" x 1713⁄ 16" (452 mm x 452 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
LEED CREDITS
VPI Rubber Adhesives contributes towards IEQ Credit 4.1 – Low-emitting
materials: VPI #225 adhesive (low VOC) and #100 adhesives (0 VOC).
For more information visit us at www.vpiflooring.com.
11
M
IL
KW
EE
D
KH
AK
ER
T
D
ES
73
6
TU
RT
LE
SE
A
C
U
C
A
C
AL
M
SE
U
G
R
M
EE
BE
N
R
73
73
0
1
SM
O
KY
AL
M
O
N
D
BR
EE
ZE
BE
IG
E
72
5
72
4
72
3
RO
AD
C
KY
RO
72
9
M
O
O
N
BL
U
E
70
9
07
I7
70
6
Q
UA
RT
Z
72
2
W
H
EA
T
W
IN
TE
R
72
8
FA
LL
S
M
IS
TY
U
LO
C
N
AI
R
G
R
AY
C
EL
TI
C
72
1
72
0
7
D
72
72
6
M
IS
T
SE
A
70
5
BR
U
SH
70
2
BL
U
E
M
YS
TI
C
FL
AN
N
EL
G
R
AY
O
R
AN
G
E
BL
O
SS
O
M
71
0
FE
SA
N
TA
R
ED
W
O
O
D
70
IA
AR
AB
O
F
N
D
SA
Decorative Hammered Flooring
70
1
0
Rubber Flooring
Our Decorative Hammered Flooring creates a current of ebb
and flow, giving any environment a continuous distinctive
style. It’s ideal for high rolling traffic areas like health care
facilities, school hallways and conference centers. Integral
for smoke, fire and noise resistance, and a critical component
for creative space fabrication.
Hammered
0.125" (3.17 mm)
Note: Due to color variations in printing, please refer to actual samples for accurate color.
For Rubber Flooring product specifications and
performance properties see page 23–24.
Micro-Squared™
1713⁄ 16" x 1713⁄ 16" (452 mm x 452 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
Sports Flooring
JET 01
LONDON FOG 05
MOROCCAN BLUE 11
12
FOREST GREEN 733
CAFÉ AU LAIT 48
Rubber Flooring
Classic Raised Round Flooring
JET 01
DARTMOOR SHALE 02
CHARCOAL SLATE 03
PEWTER 04
LONDON FOG 05
MOROCCAN BLUE 11
RUBY ROUGE 25
ROASTED CHESTNUT 39
SAND CASTLE 44
CAFÉ AU LAIT 48
FALL HARVEST 52
BURNT ORANGE 53
DOLPHIN BLUE 58
OLIVE GREEN 61
LIME GREEN 62
VPI Classic Raised Round Flooring offers perpetual motifs that complement even the most challenging
interiors. With superior impact resistance, it’s an excellent choice for high-traffic areas, including
building entrances and exits.
Round
Micro-Squared™
1713⁄ 16" x 1713⁄ 16" (452 mm x 452 mm)
0.125" (3.17 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
SEA GREEN 65
Super Match Colors are color-coordinated and available in rubber tile, rubber treads, wall base and accessories.
VPI Sports Flooring is built to succeed where others fail. Made of the
finest pressure-sensitive compounds and anti-scratch attributes, Sports
Flooring is the preferred choice in arenas, clubhouses and locker rooms
worldwide. Two profiles, square edge or interlocking designs, and
multiple color choices offer a winning combination for any sports floor.
Sports
LIGHT TAUPE 735
0.281" (7.5 mm)
Interlocking Edge
13
35" x 35" (889 mm x 889 mm)
Rubber Flooring
Harsh Environment Flooring
JET 01
DARTMOOR SHALE 02
CHARCOAL SLATE 03
PEWTER 04
LONDON FOG 05
MOROCCAN BLUE 11
RUBY ROUGE 25
ROASTED CHESTNUT 39
SAND CASTLE 44
CAFÉ AU LAIT 48
FALL HARVEST 52
BURNT ORANGE 53
DOLPHIN BLUE 58
OLIVE GREEN 61
LIME GREEN 62
Offering the ultimate in resilience, VPI Harsh Environment Flooring is impervious to toxic
chemicals, abrasions and grease, and includes enhanced safety properties. Now even the most
foreboding interiors can become more inviting and striking.
Minimum production requirements apply for all Harsh Environment Flooring. Inquire for stock and availability.
Harsh Environment
Micro-Squared™
1713⁄ 16" x 1713⁄ 16" (452 mm x 452 mm)
0.125" (3.17 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
SEA GREEN 65
Note:: Due to color variations in printing, please refer to actual samples for accurate color.
Specialty Flooring
Special order items have minimum production requirements. Available in the same
16 colors as Classic Raised Round Flooring. Inquire for complete details.
CLASSIC
RAISED
SQUARE
Special Order
LARGE SQUARE
Special Order
Micro-Squared™
1713⁄ 16" x 1713⁄ 16"
(452 mm x 452 mm)
DECK POINT
Special Order
Special Order
Tactile
Square
3511⁄ 16" x 3511⁄ 16"
(905 mm x 905 mm)
TACTILE
Deck Point
0.125" (3.17 mm)
0.125" (3.17 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
Pattern height = 0.635 mm
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
0.125" (3.17 mm)
3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm)
Pattern height = 1.03 mm
Overall Thickness = 3.17 mm
14
Overall Thickness = 3.17 mm
Rubber Stair Treads
Stringers/Risers, Nosing
Rubber Flooring
Our collection of accessories is color-coordinated
with most VPI Rubber Flooring patterns. Simplify
stairwell installations with a one-piece Stair
Tread/Riser combination, or select from our large
portfolio of regular stair treads. All accessories
are available in the same 16 colors as the Classic
Raised Round Flooring.
Decorative and Classic Stair Treads
Classic Stair Treads for Harsh Environments
One Piece Tread/Riser Combination, Round Profile
One-Piece Stair Tread for General Applications.
Radius
1/4"
1-7/8"
19"
1/8"
3/32"
.081"
1/8"
Nosing
3"
1/8"
Decorative and Classic Stair Treads
1-7/8"
Regular, Round Profile
Regular, Square Profile**
12-3/8"
Radius
1/4"
1/8"
10-1/4"
1/8"
1-7/8"
Stringer/Riser Combination
1/8"
Decorative and Classic Stair Treads for the Visually Impaired*
3/8"
Regular, Round Profile
Regular, Square Profile**
12-3/8"
Radius
1/4"
RUBBER STAIR TREADS
1/8"
1-7/8"
1/8"
1/8"
Decorative and Classic Stair Treads for the Visually Impaired*
Harsh Environment Stair Treads for the Visually Impaired*
One Piece Tread/Riser Combination, Round Profile
One-Piece Stair Tread for the Visually Impaired.
Radius
1/4"
1-7/8"
19"
1/8"
3/32"
1/8"
*Carborendum Strip Colors: White, Glowing White, Yellow, Red or Jet.
** Minimum production requirements apply.
Product Standards That Lead the Industry
MADE IN
AMERICA
LEAD
TO
TOXIC
HEAVY
TAL
METAL
Serving the
Flooring Industry
for over
15
60
YEARS
Installation Accessories
No part of your floor needs to be stronger and more rugged than the transitions.
Why? Because they take nearly constant abuse. Gurney wheels. Carts. Handtrucks.
Heels. While flooring tiles lay flat and wall base stands upright, the transitions take
the brunt of day-to-day wear. That’s why our manufacturing objective is simple:
Build the toughest transition products on the market.
Proprietary TP Rubber formulations and the longest warranty in the industry mean
you can depend on any of our transitions products for even the most rigorous
application. With tight tolerances for a snug fit, they’re shrink-proof, crack-proof,
and won’t fade—even in direct sunlight.
1"
15⁄8"
1
⁄4"
1
ACC01
⁄8"
1
Tile-Carpet Joiner 1⁄8"
20 pieces/carton, Length: 12'
⁄4"
1
⁄8"
ACC12
3
13⁄8"
⁄4"
Resilient-Carpet Joiner
20 pieces/carton, Length: 12'
5
⁄8"
11⁄4"
5
⁄16"
ACC13
1
⁄4"
ACC02
11⁄2"
Carpet Cove Cap
20 pieces/carton, Length 12'
2"
Carpet Reducer 1⁄4"
20 pieces/carton, Length: 12'
1 5⁄16"
5
⁄16"
ACC03
1"
ACC09
115⁄16"
Carpet Reducer ⁄16"
20 pieces/carton, Length: 12'
5
1
⁄8"
Tile Reducer Strip 1⁄8"
50 pieces/carton, Length: 3'
11⁄4"
15⁄8"
ACC14
1
⁄8"
1
⁄4"
ACC15
Underslung Reducer
20 pieces/carton, Length: 12'
Reducer Strip 1⁄4"
20 pieces/carton, Length: 12'
11⁄8"
11⁄2"
7
⁄1 6"
1
ACC04
⁄2"
Snap-Down Divider 11⁄8"
20 pieces/carton, Length: 12'
⁄16"
Snap-Down Divider 11⁄2"
20 pieces/carton, Length: 12'
ACC17
Pinless Metal Track (aluminum finish, no color)
20 pieces/carton, Length: 12'
11
2"
11⁄4"
ACC07M
⁄2"
ACC05
1
11⁄2"
7
⁄8"
Snap-Down Divider 2"
20 pieces/carton, Length: 12'
ACC16
5
⁄8"
Snap-Down Divider Low Profile 11⁄2"
20 pieces/carton, Length: 12'
13⁄8"
7
⁄8"
ACC18M
11⁄4"
Metal Track with Pins (aluminum finish, no color)
20 pieces/carton, Length: 12'
ACC06
1
⁄8"
ACC20
7
⁄8"
Cove Stick (natural color only)
20 pieces/carton, Length: 12'
Stair Nosing
20 pieces/carton, Length: 12'
16
11⁄8"
21
IN
KW
EL
L
14
93
FO
R
ES
T
83
R
AI
N
R
AI
SI
N
C
H
AR
C
O
AL
TO
AS
T
66
50
M
O
RO
C
C
AN
BL
U
E
TA
U
PE
11
05
LO
N
D
O
N
FO
G
04
AU
C
AF
É
CH
ES
TN
UT
RO
AS
TE
D
LA
IT
39
48
C
H
AR
C
O
AL
PE
W
TE
R
03
SL
AT
E
01
JE
T
23
SA
H
AR
A
VPI Installation Accessories contributes towards MR Credits 5.1, 5.2:
Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
BL
AC
K
FA
W
N
BR
O
W
N
97
94
LEED CREDITS
Super Match Colors are color-coordinated and available in rubber tile,
rubber treads, wall base and accessories.
Note: Due to color variations in printing, please refer to actual samples for accurate color.
Super Match
Color Coordinated Across Full Product Line
48
LA
IT
AU
C
AF
É
CH
ES
TN
UT
RO
AS
TE
D
BL
U
E
M
O
RO
C
C
AN
FO
G
LO
N
D
O
N
17
39
11
Super Match Colors are color coordinated and
available in rubber tile, rubber treads, wall base
and accessories.
05
04
PE
W
TE
R
SL
AT
E
C
H
AR
C
O
AL
JE
T
01
03
Don’t settle for “close enough” or a color that’s almost a match. At VPI, even
though we offer a rainbow of color choices, we’ve also made sure that popular
colors are available for the entire job—including the accessories. Choose from
these seven colors to ensure a dead-on match to your floor tiles, wall base and
rubber treads.
CUSTOM FLOORING LINE
Premium quality—
supreme value
Premium Resilient Tile
Five Reasons to Choose the Best Commercial Tile in the Industry.
1. Toughness Beyond Compare, and a Warranty to Match
How good is PRT? While some flooring products offer five or even ten-year warranties, our PRT line is warranted for 75
years. That means peace of mind, even in demanding high-traffic applications like schools, retail environments, hospitals,
airports, office buildings and more.
Toughness Comparison
Environment: Commercial High Traffic
Typical Commercial Warranty in Years
Static Load Limit in PSI
Dynamic Load Limit in PSI
PRT
75
2500
2500
VCT
1
75-125
75-125
Sheet Vinyl
5
800
800
LVT
10
800
800
Linoleum
3
500
450
Rubber Tile
10
1200
450-850
Rubber Sheet
10
1200
450-850
2. Low Maintenance Means You Save Money
Our new Premium Resilient Tile (PRT) provides incredible looks, performance, durability and longevity. Very simply, that
means value. PRT requires less maintenance than any other floor, and because of its extended life cycle, your investment is
protected for decades.
Maintenance Cost Comparison
Environment: Commercial High Traffic
PRT
VCT
Must wax
No
Yes
Wear Layer
No
Wax
Gloss Layer
No
Wax
Traffic in Excess of 1500 PSI*
Yes
No
Marring and Scuff Resistance
High
Low
Repairability
Easy
Easy
Maintenance Costs Index
100
220
*Damage will occur or dirt will be ground into the surface of the flooring.
Sheet Vinyl
No
Yes
Yes
No
Medium
Hard/Costly
200
LVT
Suggested
Yes
Yes
No
Low
Easy
200
Linoleum
Suggested
Yes
Yes
No
Medium
Hard/Costly
210
Rubber Tile
Rubber Sheet
Suggested
Suggested
No
No
No
No
No
No
Medium
Medium
Shading Issues Hard/Costly
190
190
3. Earth-Friendliness in Many Different Ways
Any product with a 75-year life cycle is earth-friendly—not having to replace it is environmentally superior to several
reinstallations. But beyond its life cycle, PRT has a better carbon footprint than most other materials, is FloorScore certified, and
can contribute towards two LEED credits.
Earth Friendliness Comparison
Carbon Footprint Index–Manufacturing
Carbon Footprint Index–Transportation
Carbon Footprint Index–Prod. Life Cycle
Total Earth Friendly Index
PRT
100
100
100
300
VCT
120
120
500
740
Sheet Vinyl
120
120
400
640
LVT
150
300
400
850
LEED CREDITS
VPI Tile contributes towards:
IEQ Credit 4.1 – Low-emitting Materials: VPI #100 & #225 adhesives– 0 VOC
IEQ Credit 4.3 – Low-emitting Materials: VPI Tile is FloorScore certified
MR Credits 4.1, 4.2; Recycled Content: 10.4% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
18
Linoleum
50
250
300
600
Rubber Tile
100
120
200
420
Rubber Sheet
100
120
200
420
Premium Resilient Tile
Simply the best
4. Superiority in Air Quality.
After installation, air quality is an important concern. With no outgassing and no VOC emissions, PRT is unmatched.
Air Quality/Sick Building Syndrome Comparison
PRT
VCT & Sheet Vinyl
Linoleum
Cork
Silica Based Products
Carpet
Epoxy Poured Floors
No out-gassing & no VOC emissions. No tile dust emitted during install or removal. PRT adhesive emits zero VOCs.
Some VCT & Sheet Vinyl products can out-gas for weeks after installation.
Continually out-gasses. Not suitable for use with small children or adults with respiratory illness.
Chemicals used to bind cork often include formaldehyde that can cause serious health problems.
Silica dust released during installation can be extremely hazardous. Manufacturers provide extensive warning on use.
Major cause of allergic health problems and often VOCs are emitted.
Research indicates that emissions from uncured epoxy can be a major health issue.
5. More Custom Color Options than Any Other Product.
With virtually endless color options, PRT meets any aesthetic challenge.
Base
Color
Color 1
Color 2
Color 3
1. Choose a Base Color, ANY Color
The base color of PRT can be virtually any color. That
could be a color in our catalog. Or any catalog. Or an
existing floor. Or a fabric swatch. Or a paint chip. Instead
of a small palette, your choices are virtually infinite.
2. Choose up to Three Mottle Colors
To add depth and texture to your base color, you can add
up to three mottle colors to our standard pattern—just pick
a color(s), any color(s).
3. Ask about Custom Patterns
Our standard PRT pattern is an excellent choice for most
applications, but if you need a custom solution, call us.
These samples show just a few of the endless color combinations possible with VPI’s Custom PRT flooring line.
Choose your base color and up to three mottle colors to create your own unique tile. Custom patterns available too.
PRT features match those of our ESD tile (with the exception of electrostatic discharge properties) yet offers limitless color
customization options. Please see page 4 for a complete list of product features.
Minimum production requirements apply for all PRT Flooring. Inquire for complete details.
19
For more information visit
www.vpif looring.com
Properties and Specs
Static Control Flooring
Chemical Resistance Properties
per ASTM F 925 Methodology
Static Control Flooring
Performance Properties
CONDUCTILE®
STATMATE™
ELECTRICAL/ELECTROSTATIC PROPERTIES
ESD STM 7.1: Resistance of
Conforms
Flooring Materials
ASTM F-150:
Electrical Resistance
Point to Point &
Point to Ground
25,000 – 1,000,000
Ohms
Point to Ground
1,000,000 –
100,000,000
Ohms
AATCC–134: Electrostatic Propensity
< 12 Volts
< 30 Volts
FTMS 101C: Static
Decay, Method 4046
at 15% RH
5,000 – 0 Volts in
< 0.01 seconds
5,000 – 0 Volts in
< 0.20 seconds
OTHER PROPERTIES
ASTM F-1700: Solid Vinyl
Conforms
Floor Covering Materials
ANSI/UL 779: Electrically
Meets UL Standard
Conductive Floor Coverings
NFPA 101: Life Safety Code
Passes
(
ASTM E-648: Critical
Radiant Flux CRF (W/cm2)
> 1.0 W / cm 2
ASTM E-662: Smoke Density
< 450
ASTM E-84: Fire Resistance
(Steiner Tunnel)
< 75 (Class I)
ASTM F-970: Static Load
< 0.001" RI @ 250 psi (1.125" dia. ft.)
2,500 psi @ 0.005” RI (0.5” dia. ft.)
NFPA 99: Standard for
Health Care Facilities
Passes
ASTM F-925: Chemical Resistance
Excellent (Acids, Alkalis,
Household Chemicals)
Composition
Gauge
Size
CONSTRUCTION
Homogeneous solid vinyl tile that has
encapsulated conductive elements
of the carbon family distributed
throughout the structure.
1
⁄ 8" (3mm)
12" x 12", 24" x 24", 36" x 36"
Custom sizes, pre-grooved available
Trowel Size*
24 Hour
Chemical
1 Minute
24 Hour
0
SA2
Hydrogen Peroxide 30%
0
SD1
SA1
SA3
Hydrogen Chloride
0
SA1
Household Ammonia
0
0
Iodine
CC1
CC3
Ammonium Hydroxide 20%
0
0
Isopropyl Alcohol
0
SD3
Amyl Acetate
0
SA3
Kerosene
0
SA1
SD1
SA3
Methyl Alcohol
0
0
0
SA2
Methyl Ether Ketone
SA1
SA3
Acetone
Acetonitrile
Benzene
Betadine*
0
CC3
Methylene Chloride
SA3
SA3
Butyl Alcohol
0
SA2
Methyl -2-pyrrolidone
SA1
SA3
Butyl Methyl Ether
0
SA1
Mineral Oil
0
0
Buffer, phenol red
CC2
CC3
Nitric Acid 5%
0
SA2
Carbon Tetrachloride
0
SA1
Nitric Acid Conc.
0
SD3
Chloroform
0
SA2
Olive Oil
0
0
CC2
CC3
Perchloroethylene
0
SA3
Phenol
Creosote
Cresol
Dichlormethane
SD3
SA3
0
SA2
0
SA1
Silver Nitrate 5%
0
CC3
Dimethyl Sulfoxide
SA3
SA3
Sodium Hydroxide 5%
0
0
Dimethyl Formamide
SA1
SA3
Sodium Hydroxide 50%
0
0
Ether
0
SD1
SD3
Sodium Metasilicate
0
Ethyl Acetate
0
SA3
Sulfuric Acid 5%
0
0
Ethyl Alcohol
0
0
Sulfuric Acid 77%
0
CC2
0
SA1
Sulfuric Acid Conc.
SD3
SA2
Tetrahydrofuran
Forane - 113E
SD2
SA2
Forane - MES
SD2
SA2
Formaldehyde 40%
0
0
Toluene
VPI 150 Conductive Epoxy Adhesive
covers approx. 135 sq. ft/gallon
Freon
0
0
Tribasic Sodium Phosphite
0
0
1/16”x 1/16” Square Notch with 1/16”
Flats OR 1/16” Half Circular Notch
with 1/32” Flats
Unleaded Gasoline
0
0
Trichloroethane
SA3
SA3
Hexane
SD1
SA1
Trichloroethylene
SA1
SA2
Heptane
SD1
SA1
Triethylamine
0
CC2
0
SA2
Trifluoroacetic Acid
0
SA2
Trowel Size*
VPI 160 Conductive Acrylic Adhesive
covers approximately 135 square
feet/gallon
1/8” V-Notch with 1/16” Flats
Grounding Material
(Supplied with order)
One 2”x 24” copper strip installed
every 2,000–2,500 sq. ft.
Maintenance
No Wax
Adhesive* & Spread Rate
Acetic Acid Conc.
1 Minute
Forane - 113C
INSTALLATION
Adhesive* & Spread Rate
Chemical
WARRANTY
Free from defects in
workmanship and materials
75 year Warranty
Electrical Performance **
Lifetime Warranty
* Adhesive and trowel size depends on sub floor. Please refer to VPI’s
Installation and Maintenance Instructions for proper trowel size selection.
** VPI’s Exclusive Warranty is valid only when tile is installed with
VPI #150 Conductive Epoxy or VPI #160 Conductive Acrylic Adhesive.
Ethyl Ether
Hydrochloric Acid 5%
0
CC2
SA3
SA3
Turpentine
0
CC2
Thimerosal
0
CC3
SD3
SA3
Hydrochloric Acid 36%
0
SA3
Vinegar
0
0
Hydrochloric Acid Conc.
0
SD1
Xylene
0
SA2
Hydrofluoric Acid Conc.
0
0
Categories:
SD = Surface Dulling loss of gloss
CC = Color Change discoloration, bleaching, staining, etc.
SA = Surface Attack softening, warping, blistering, etc.
Ratings
0 = No change
1 = slight change
2 = moderate change
3 = severe change
* New and longer term Betadine stains can be removed from VPI floors by
using abrasive buffing pads during the cleaning process. Please see the
VPI web site for details.
20
Static Control Flooring Specifications
GENERAL
REFERENCES
A. ASTM F-1700: Solid Vinyl Floor Tile
B. ASTM F-150-06: Electrical Properties
C. ESD STM 7.1-2001 Electrical Properties
D. ANSI/ASTM FISCO: Electrical Properties of Static Control Flooring
E . ANSI/UL 779: Electrically Conductive Flooring
F . NFPA 99: Standard for Health Care Facilities
G. NFPA 101: Life Safety Code
H. ASTM E-662: Smoke Density
I. ASTM E-648 / NFPA 253: Fire Resistance
J. ASTM E-84: Fire Resistance (Steiner Tunnel)
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
ASTM D-3389: Abrasion Resistance
ASTM D-2240: Hardness
ASTM D-2047: Static Coefficient of Friction
ASTM F-970: Static Load
ASTM D-297: Density
ASTM D-412: Tensile
ASTM D-412: Elongation
ASTM D-624: Tear Die
ASTM F-925: Chemical Resistance
ASTM F-1515: Light Aging
ASTM F-1514: Heat Aging
WARRANTY
A. Provide manufacturer’s warranty under provisions of Section [01700l.] [01740.]
B. Warranty: Include a 5-year warranty that products are free from defects in materials and workmanship. Include lifetime warranty for electrical resistance.
PRODUCTS
ACCEPTABLE MANUFACTURERS
A. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALS
A. Conductive Resilient Floor Tile: Electrical Resistance; 25,000 – 1,000,000 ohms; VPI Conductile®: 12”x 12”, 24”x 24” & 36”x 36” square edge; 24”x 24”
& 36”x 36” pre-grooved; available in 1/8” (3mm) thickness, color selected.
B. Static Dissipative Resilient Floor Tile: Electrical Resistance; 1,000,000 – 100,000,000 ohms; VPI Statmate™: 12”x 12”, 24”x 24” & 36”x 36” square edge;
24”x 24” & 36”x 36” pre-grooved; available in 1/8” (3mm) thickness, color selected.
MANUFACTURING TOLERANCES
A. Micro-Squared™ 12”x12” tile to plus or minus 0.002” inch; cut vertical edges perpendicular to tile surface.
B. Precision control gauge to assure consistent surface with no high edges.
ADHESIVES
A. Flooring Adhesives: VPI #150 Conductive Epoxy or VPI #160 Conductive Acrylic Adhesive as required for specific use.
B. Use trowel and roller specified in the Installation and Maintenance Instructions as required per specific use.
EXECUTION
EXAMINATION
A. Verify that stranded ground wire is in place at floor-wall juncture, and is properly connected to ground OR a steel column in area is suitable for grounding.
CONSULT WITH MANUFACTURER FLOOR PREPARATION GUIDE FOR PRECAUTIONS WHEN SUBSTRATE IS LIGHTWEIGHT AGGREGATE CONCRETE,
MAGNESITE FLOORING, OR FOR BELOW-GRADE CONDITIONS.
B. Verify that concrete sub floors on- or below-grade are installed over a suitable moisture retardant membrane.
C. Ensure concrete floors are dry and exhibit alkalinity levels between 5 & 9 pH with adequate carbonization and no dusting.
Maximum moisture-emission: 5 lbs./1,000 sq. ft./24 hours.
MOISTURE TESTS ARE RECOMMENDED.
D. Ensure floor surfaces are smooth and flat with maximum variation of 1/8 inch in 10 feet.
E. Ensure floor surfaces are clean and free from dust, paint, oil, grease, curing agents, parting compounds, surface hardeners, sealers, solvents, old adhesives and other
extraneous substances.
F. Beginning of installation means acceptance of surface and conditions.
INSTALLATION
A. Install flooring in accordance with manufacturer’s printed instructions.
GROUNDING
A. Connect copper grounding strip provided by VPI to a stranded ground wire, cut off excess and recess into the wall.
OR
B. Ground to a column or beam by drilling and tapping the column and affixing the grounding strip to the column in accordance with the manufacturer’s instructions.
C. Lay the balance of the grounding strip into the adhesive covering it with additional adhesive. Install the flooring over the grounding strip.
PROTECTION
A. Prohibit traffic on finished floor for 48 hours after installation.
CLEANING
A. Remove excess adhesive from floor, base, and wall surfaces without damage, while adhesive is still wet.
B. Clean floor and base surfaces in accordance with manufacturer’s instructions.
STATIC CONTROL SYSTEM
A. Precisely distributed conductive elements provide through-tile conductivity.
B. Conductive adhesive links elements and provides tile-to-tile conductivity.
C. The tile and adhesive create a pathway of moderate electrical conductivity to ground.
FIELD QUALITY CONTROL
A. Test completed instructions by representative in presence of Architect and Owner; in accordance with the test procedures of ESD STM 7.1, NFPA 99 or ASTM F-150.
LEED CREDITS
VPI Tile contributes towards:
IEQ Credit 4.1 – Low-emitting Materials: VPI #150 & #160 adhesives – 0 VOC
IEQ Credit 4.3 – Low-emitting Materials: VPI Tile is FloorScore certified
MR Credits 4.1, 4.2: Recycled Content: 10.4% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional Materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
21
For more information visit
www.vpif looring.com
Properties and Specs
Wall Base Performance Properties
PROPERTY
VINYL – Wall Base
TEST DATA
TPR (RUBBER) – Wall Base
ASTM 1861-02
Conforms
Flame Propagation (UL 992)
<2.0
Conforms
<2.0
Smoke Density Test (ASTM E 662)
<450
<450
Critical Radiant Flux (ASTM E 648 or NFPA 253)
Class I (>0.45 W/cm2)
Class I (>0.45 W/cm2)
Composition
High grade resin, thermoplastic binders, fillers, and pigments
CONSTRUCTION
1
Gauge
Feet Per Carton (1 length = 4')
21⁄2" or 4"
6"
High grade resin, thermoplastic binders, fillers, and pigments
8
⁄"
.080"
1
120'
96'
Lengths 120', Rolls 160'
96'
120'
96'
⁄ 8"
Height
2 1⁄ 2", 4", 6"
2 1⁄ 2", 4", 6"
Style
Cove or Straight Toe
Cove or Straight Toe
Outside Corners
2 1⁄ 2", 4", 6" (30 per carton)
Environmental
n/a
2 1⁄ 2", 4", 6" (30 per carton)
No lead, no heavy metals. Wall Base qualifies for LEED Materials & Resource Credits 4.1 & 4.2: Recycled Content
(32% Pre-Consumer content). Adhesive qualifies for LEED IEQ Credit 4.1: Low emitting Adhesives (0VOC).
INSTALLATION
Adhesive & Spread Rate
#600 Wall Base Adhesive; Covers approximately:
75 linear feet of 4" base per 30 oz. cartridge
275 linear feet of 4" base per gallon
1100 linear feet of 4" base per 4 gallon container
#600 Wall Base Adhesive; Covers approximately:
75 linear feet of 4" base per 30 oz. cartridge
275 linear feet of 4" base per gallon
1100 linear feet of 4" base per 4 gallon container
Trowel Size
3
⁄ 32" x 3⁄ 32" triangular notch with 3⁄ 32" flats.
If applying adhesive with cartridge gun, use a 2-hole
nozzle for a 2 1⁄ 2", 3-hole nozzle for a 4",
and a 5-hole nozzle for 6".
3
⁄ 32" x 3⁄ 32" triangular notch with 3⁄ 32" flats.
If applying adhesive with cartridge gun, use a 2-hole
nozzle for a 2 1⁄ 2", 3-hole nozzle for a 4",
and a 5-hole nozzle for 6"
WARRANTY
One Year*
* The use of any other adhesive will void VPI’s warranty.
Wall Base Specifications
GENERAL
REFERENCES
A. ASTM F 1861-02: Wall Base – Vinyl Type TV; TPR (Rubber) Type TP
WARRANTY
A. Provide manufacturer‘s warranty under provisions of Section [01700.] [01740.]
B. Warranty: Include one year warranty that products are free from defects in
materials and workmanship.
PRODUCTS
ACCEPTABLE MANUFACTURERS
A. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALS
A. Base: [ASTM F 1861-02] VPI Wall Base; top set coved, [21⁄ 2] [4] [6] inches high,
[1⁄ 8] [0.080] inch thick, color [selected.] [scheduled.] (Rubber available in 1⁄ 8 inch
gauge only.)
Pricing for wall base is determined by color. Specify color.
MANUFACTURING TOLERANCES
A. Precision control gauge to assure smooth surface with no high edges.
ADHESIVES
A. Wall Base adhesive: VPI No. 600 Acrylic Copolymer Wall Base Adhesive
qualifies for LEED Credit IEQ Credit 4.1: Low-Emitting Adhesives (0 VOC).
ENVIRONMENTAL
A. No lead.
B. No heavy metals.
C. Qualifies for LEED Materials & Resources Credits 4.1 & 4.2: Recycled Content
(32% Pre-Consumer Content)..
EXAMINATION
A. Ensure contact wall surface to 1⁄ 2 inch below top of base is clean and free
from dirt, paint, oil, grease, wall covering, old adhesives, and other extraneous
substances.
B. Beginning of installation means acceptance of surfaces and conditions.
INSTALLATION
A. Fit top set base joints tight and vertical. Install base on solid backing;
adhere tightly to wall surfaces. Miter and form internal and external corners
as detailed in manufacturer’s installation and maintenance instructions.
(www.vpiflooring.com)
B. Scribe and fit to door frames and other obstructions.
PROTECTION
A. Prohibit traffic on finished floor for 48 hours after installation.
CLEANING
A. Remove excess adhesive from floor, base, and wall surfaces without damage,
while adhesive is still wet.
B. Clean floor and base surfaces.
LEED CREDITS
VPI Wall Base contributes towards:
IEQ Credit 4.1 – Low-emitting Materials: VPI #600 adhesive – 0 VOC
IEQ Credit 4.3 – Low-emitting Materials: VPI Wall Base is FloorScore certified
MR Credits 4.1, 4.2: Recycled Content: 32% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional Materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
22
Rubber Flooring Performance Properties
DECORATIVE ROLLED
DECORATIVE SLATE, DECORATIVE HAMMERED, CLASSIC RAISED ROUND/SQUARE
Gauge
0.125"
3.17 mm
Gauge
0.080"
Sizes
3511⁄16" x 3511⁄16"
905 mm x 905 mm
Size
60" x 50' approx. (1.5 m x 15.2 m) roll
1713⁄16" x 1713⁄16" Micro-Squared™
452 mm x 452 mm Micro-Squared™
Profiles & Colors
Paper textured look; 32 colors
Decorative Slate
26 colors
Recycled Content
Recycled post-manufacturing decorative chips
Decorative Hammered
21 colors
ASTM F-1859 - Rubber Sheet Flooring W/O Backing
Complies - Type 1
Classic Raised Round
16 colors
ASTM E-648 - Critical Radiant Flux CRF (W/cm2)
> 0.45 - Class 1
Classic Raised Square
16 colors
ASTM E-662 - Smoke Density
≤ 450
Large Square
16 colors
ASTM E-84 - Fire resistance (Steiner Tunnel)
Class 2
Deck Point
16 colors
ASTM D-3389 - Abrasion resistance
Exceeds Requirements
ASTM F-1344 - Std Specification for Rubber Floor Tile
Exceeds Requirements
ASTM F-970 - Static Load
Complies/Exceeds
ASTM E-648 / NFPA 253 - Fire Resistance
Class 1
ASTM F-1515 - Light Aging
Complies
Critical Radiant Flux CRF (W/cm2)
<1.10
ASTM F-1514 - Heat Aging
Complies
ASTM E-662 - Smoke Density
Class 1 ≤ 450
ASTM D-2047 - Static Coefficient of Friction
Meets and Exceeds ADA Guidelines
ASTM E-84 - Fire Resistance (Steiner Tunnel)
Class 2
Limited Wear Warranty
10 years
New York State Fire Prevention Code
Filed in Compliance w/ Article 15, Part 1120
Maintenance
No Wax
New York City Fire Prevention Code
Accepted under Section 27-348
ASTM D-3389 - Abrasion Resistance (H-18 500g @ 1,000 cycles)
0.5g
ASTM D-2240 - Hardness
ASTM D-2047 - Static Coefficient of Friction
≥ 85 Shore A
.54 (with specified conditioner)
.67 (bare floor surface)
ASTM F-970 - Static Load (modified)
1,100 psi
ASTM D-297 - Density
1.72 g/cc
Profiles & Colors
2 mm
HARSH ENVIRONMENT
Gauge
0.125"
Stud Height: 0.020"
Sizes
3513⁄16" x 3513⁄16"
3.17 mm
Stud Height: 0.5 mm
910 mm x 910 mm
454 mm x 454 mm Micro-Squared™
17 ⁄8" x 17 ⁄8" Micro-Squared
7
™
7
ASTM D-412 - Tensile
1,000 psi
ASTM D-412 - Elongation
170%
Profiles & Colors
ASTM D-624 - Tear Die
190 lb/in
ASTM D-471 - Oil & Grease Resistance
ASTM Oil #1: Excellent
ASTM F-925 - Chemical Resistance
Complies (Available on request)
ASTM F-925 - Resistance to Chemicals
Excellent (Acids, Alkalis, Solvents)
ASTM F-1515 - Light Aging
Better than ΔE = 8.0
ASTM D-2240 - Hardness Shore A
≥85
ASTM F-1514 - Heat Resistance
Better than ΔE = 8.0
ASTM E-648 - Critical Radiant Flux
≥0.45
Adhesive VOC (Volitale Organic Content)
Very Low
ASTM E-84 - Flame Development
Class 1
Limited Wear Warranty
10 Years
ASTM E-662 - Smoke Density
≤450
ASTM D-3389 - Abrasion Resistance Taber Abrasion
Exceeds Requirements
SPORTS FLOORING
Round Low Profile With Chamfered Edges - 16 colors
ASTM Oil #3: Excellent
(H-22 Wheel @ 1000 Cycles / 1.0 Kg Load)
Gauge
0.281" overall
ASTM D-2047 - Static Coefficient of Friction
Exceeds ADA Guidelines
Wear Layer/Backing
2 mm Natural rubber/5.5 mm Recycled Rubber
Cigarette Burn & Solder Resistance
Excellent
Size
35" x 35" (889 mm x 889 mm)
Limited Wear Warranty
10 Years
Profiles & Colors
Slate (Square Edge or Interlocking), 6 colors
VOCs (Volatile Organic Content)
Resistance to Golf Spikes, Cleats and Skateboards
Excellent
Safety
Compliant to ADA Guidelines
ASTM D-2240 - Hardness Shore A
85
Cigarette Burn Resistance
Excellent
Limited Wear Warranty
5 Years
7.5 mm overall
Very Low
Stair Treads Available in 36", 48" and 72" Lengths
Rubber Flooring Specifications
GENERAL
All VPI Rubber Flooring; Decorative Slate, Decorative Hammered, Classic Raised Round and Square shown on the finish schedule, or otherwise listed here within, shall be furnished
by VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081. All VPI Rubber Flooring shall comply with ASTM F-1344 and meet Class 1 Fire Rating Standards as tested to ASTM
E-648/ASTM E-662 and ASTM E-84, Class 2. All VPI Rubber Flooring shall be (specify: Decorative Slate, Decorative Hammered, Classic Raised Round and Square) profiles in
1713⁄ 16" x 1713⁄ 16" (452 mm x 452 mm) Micro-Squared™ or 3511⁄ 16" x 3511⁄ 16" (905 mm x 905 mm) sizes and 0.125" (3.17 mm) thickness in the color(s) specified.
All VPI Harsh Environment Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081.
All VPI Harsh Environment Flooring shall comply with ASTM F-1344 and meet Class 1 Fire Rating Standards as tested to ASTM E-84, ASTM
E-648/ASTM E-662. All VPI Harsh Environment Flooring shall be (specify: Round) profile in 177⁄ 8" x 177⁄ 8" (454 mm x 454 mm) or 3513⁄ 16" x 3513⁄ 16" (910 mm x 910 mm) sizes and 0.125"
(3.17 mm) thickness in the color(s) specified.
All VPI Decorative Rolled Rubber Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI
53081. All VPI Decorated Rolled Rubber Flooring shall comply with ASTM F-1859 and meet Class 1 Fire Rating Standards as tested to ASTM E-648/ASTM E-662 and ASTM E-84 Class
2. All VPI Decorative Rolled Rubber Flooring shall be 60" x 50' (1.5 m x 15.2 m) size and 0.080 (2.00 mm) thickness in the color(s) specified.
All VPI Sports Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081. All VPI
Sports Flooring shall comply with ASTM F-1344. All VPI Sports Flooring shall be 35" x 35' (889 mm x 889 mm) 0.281" (7.5 mm) thickness in the color(s) specified.
INSTALLATION & MAINTENANCE
All VPI Rubber Flooring, Decorative Slate, Decorative Hammered, Classic Raised Round and Square, Decorative Rolled Rubber, Harsh Environment and Sports Flooring must be installed
in accordance with manufacturer’s specifications, including subfloor preparation and recommended adhesive. Refer to “VPI Rubber Flooring Installation and Maintenance” for complete
details. Copies can be obtained by calling 800-874-4240, at www.vpiflooring.com, or by writing: VPI Corporation, 3123 South 9th Street, P.O. Box 451, Sheboygan, WI 53082-0451.
23
For more information visit
www.vpif looring.com
Properties and Specs
Rubber Flooring
Chemical Resistance Properties
per ASTM F 925 Methodology
Rubber Stair Treads,
Stringer/Riser Combination, Nosing
Specifications
GENERAL
Immersion Time
Chemical
Betadine cleanser (povidone 7.5%)
Betadine solution (povidone 10%, iodine 1%)
1 Minute
No change
24 Hour
Slight change
Slight change
Stain
Coal tar (bitumen)
Slight stain
Stain
Household ammonia solution (5%)
No change
No change
Household bleach solution (5.25%)
No change
Whitening
Very slight discoloration
Discoloration
Hydrochloric acid solution (5%)
Iodine solution (tincture of iodine 2.5%)
Yellow stain
Yellow stain
Kerosene
Yellow stain
Slight Swelling
Olive oil (light)
No change
No change
Phenol (5%)
No change
No change
Phenox #6925 – 5% as recommended
Phenolic germicidal detergent
(o-phenyphenol 0.45%
o-Benzyl-p-Chlorophenol 3.30%)
(contains: 0.48% / 3.30%) Lalema
No change
No change
Phenox #6925 – pure solution 100%
Phenolic germicidal detergent
(o-phenyphenol 0.48%
o-Benzyl-p-Chlorophenol 3.30%)
(contains: 0.48% / 3.30%) Lalema
No change
No change
Polyquat #6750 – 1% as recommended
Germicidal fungicidal virucidal detergent
(Didecyl dimethyl ammonium chloride)
(contains: 3.85%) Lalema
No change
No change
Polyquat #6750 pure solution 100%
Germicidal fungicidal virucidal detergent
(Didecyl dimethyl ammonium chloride)
(contains: 3.85%) Lalema
No change
PRODUCTS
ACCEPTABLE MANUFACTURERS
A. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALS
A. Rubber Stair Treads: [ASTM F-1344] [VPI Rubber Decorative and Classic
Stair Treads][VPI Rubber Classic Stair Treads for Harsh Environments]
[VPI Rubber Decorative and Classic Stair Treads for the Visually
Impaired][VPI Rubber Harsh Environment Stair Treads for the Visually
Impaired]; [One-Piece, Round Profile][Regular, Round Profile][Regular,
Square Profile]; [19 5⁄16" by 36, 48 or 72"][12 3⁄4" by 36, 48 or 72"] by 0.138"
thick; color [selected.]
B. VPI Rubber Stringer/Riser Combination; 10 1⁄4 " x 24' with a 3⁄8" toe by
0.081" thick; color [selected].
C. VPI Rubber Nosing; 3" x 1 7⁄8 " x 12' x 0.125" thick; color [selected.]
MANUFACTURING TOLERANCES
A. Precision control gauge to assure consistent surface with no high edges.
No change
EXECUTION
No change
No change
Silver nitrate (normal)
Brown stain
Dark brown stain
Sodium Hydroxide solution (5%)
No change
No change
Very slight discoloration
Discoloration
Unleaded gasoline (regular grade)
WARRANTY
A. Provide manufacturer’s warranty under provisions of Section [01700.]
[01740.]
B. Warranty: Include a 10-year warranty that products are free from
defects in materials and workmanship.
ADHESIVES
A. Flooring Adhesives: [VPI No. 225 Acrylic Adhesive] [VPI No. 100 Solvent
Free 2pt. Epoxy Adhesive][VPI No. AS-M or AS-L Adhesive Tape]
as required for specific use.
Rubbing alcohol (70%)
Sulfuric acid solution (5%)
REFERENCES
A. ASTM F-1344: Rubber Floor Tile
B. ASTM E-648: Fire Resistance
C. ASTM E-662: Smoke Density
D. ASTM E-84: Flame Development
E. ASTM D-3389: Abrasion Resistance
Slight swelling
Swelling
Wright’s Blood Stain** - applied directly to floor
Blue Stain
Blue Stain
White mineral oil (medicinal grade)
No change
No change
White vinegar (5%)
No change
No change
Note: Tests have been done on #33 color gray compound. The results can vary for other colored products.
LEED CREDITS
VPI Rubber Adhesives contributes towards IEQ Credit 4.1 – Low-emitting
Materials: VPI #225 adhesive (low VOC) & #100 adhesives (0 VOC)
For more information visit us at www.vpiflooring.com.
EXAMINATION
Consult with manufacturer Installation & Maintenance Instructions for
flooring preparation, and Floor Preparation Guide for precautions when
substrate is lightweight aggregate concrete, magnesite flooring, or for
below-grade conditions.
A. Verify that concrete sub floors on- or below-grade are installed over a
suitable moisture retardant membrane.
B. Ensure concrete floors are dry and exhibit alkalinity levels between
5 & 8 pH with adequate carbonization and no dusting. Maximum moisture
emission: 3 lbs./1,000 sq. ft./24 hours. Moisture tests are recommended.
C. Ensure floor surfaces are smooth and flat with maximum variation of
1
⁄8 inch in 10 feet.
D. Ensure floor surfaces are clean and free from dust, paint, oil, grease,
curing agents, parting compounds, surface hardeners, sealers, solvents,
old adhesives and other extraneous substances.
E. Beginning of installation means acceptance of surface and conditions.
INSTALLATION
A. Install stair treads in accordance with manufacturer’s printed instructions.
B. Use adhesive recommended by floor tile manufacturer.
PROTECTION
A. Unless VPI No. AS-M or AS-L adhesive tape is used, prohibit traffic on
finished floor for 48 hours after installation.
CLEANING
A. Remove excess adhesive from floor, base and wall surfaces without
damage, while adhesive is still wet.
B. Clean stair treads, stringer/riser and nosing surfaces in accordance with
manufacturer’s instructions.
24
Premium Resilient Tile (PRT)
Performance Properties
GENERAL
OTHER PROPERTIES
(
ASTM F-1700: Solid Vinyl
Floor Covering Materials
Conforms
ASTM E-648: Critical
Radiant Flux CRF (W/cm2)
> 1.0 W / cm 2
ASTM E-662: Smoke Density
< 450
ASTM E-84: Fire Resistance
(Steiner Tunnel)
< 75 (Class I)
ASTM F-970: Static Load
< 0.001" RI @ 250 psi (1.125" dia. ft.)
2,500 psi @ 0.005" RI (0.5” dia. ft.)
ASTM F-925: Chemical Resistance
Excellent (Acids, Alkalis,
Household Chemicals)
CONSTRUCTION
Composition
Homogeneous solid vinyl tile
12" x 12", 24" x 24", 36" x 36"
Custom sizes, pre-grooved available
Size
1
⁄ 8" (3mm)
Gauge
REFERENCES
A. ASTM F-1700: Solid Vinyl Floor Tile
B. ASTM E-662: Smoke Density
C. ASTM E-648/NFPA 253: Fire Resistance
D. ASTM E-84: Fire Resistance (Steiner Tunnel)
E. ASTM D-3389: Abrasion Resistance
F. ASTM D-2240: Hardness
G. ASTM D-2047: Static Coefficient of Friction
H. ASTM F-970: Static Load
I. ASTM D-297: Density
J. ASTM D-412: Tensile
K. ASTM D-412: Elongation
L. ASTM D-624: Tear Die
M. ASTM F-925: Chemical Resistance
N. ASTM F-1515: Light Aging
O. ASTM F-1515: Heat Aging
WARRANTY
A. Provide manufacturer’s warranty under provisions of Section [01700.] [01740.]
B. Warranty: Include a 5-year warranty that products are free from defects in materials
and workmanship.
PRODUCTS
INSTALLATION
Adhesive & Spread Rate
VPI 100 Epoxy Adhesive
covers approx. 135 sq. ft/gallon
Adhesive & Spread Rate
VPI 225 Latex Adhesive
covers approx. 135 sq. feet/gallon
Trowel Size*
1/16”x 1/16” Square Notch with 1/16”
Flats OR 1/16” Half Circular Notch
with 1/32” Flats
Maintenance
No Wax
WARRANTY
Free from defects in
workmanship and materials
Premium Resilient Tile (PRT)
Specif ications
75 year Warranty
* Trowel size is dependent on adhesive type and the porosity of the sub floor.
Please refer to VPI’s Installation and Maintenance Instructions for proper
trowel size selection.
ACCEPTABLE MANUFACTURERS
A. VPI Corporation, 3123 South 9th Street. P.O. Box 451, Sheboygan, WI 53082-0451
FLOOR COVERING MATERIALS
A. Solid Vinyl Resilient Floor Tile.
B. Square edge or pre-grooved 12" x 12" tiles, 24" x 24" tiles, 36" x 36" tiles; available in
1/8" (3mm) thickness, color selected.
MANUFACTURING TOLERANCES
A. Micro-Squared™ 12" x 12" tile to plus or minus 0.002"; cut vertical edges
perpendicular to tile surface.
B. Precision control gauge to assure consistent surface with no high edges.
ADHESIVES
A. Flooring Adhesives: VPI #100 or VPI #225 Adhesive as required for specific use.
B. Use trowel and roller specified in the Installation and Maintenance Instructions as
required per specific use.
EXECUTION
LEED CREDITS
VPI Tile contributes towards:
IEQ Credit 4.1 – Low-emitting Materials: VPI #100 & #225 adhesives– 0 VOC
IEQ Credit 4.3 – Low-emitting Materials: VPI Tile is FloorScore certified
MR Credits 4.1, 4.2; Recycled Content: 10.4% pre-consumer recycled content
MR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
EXAMINATION
Consult with manufacturer Floor Preparation Guide for precautions when substrate is
lightweight aggregate concrete, magnesite flooring, or for below-grade conditions.
A. Verify that concrete sub floors on- or below-grade are installed over a suitable
moisture retardant membrane.
B. Ensure concrete floors are dry and exhibit alkalinity levels between 5 & 9 pH with
adequate carbonization and no dusting. Maximum moisture emission:
5 lbs./1,000 sq. ft./24 hours. Moisture tests are recommended.
C. Ensure floor surfaces are smooth and flat with maximum variation of 1⁄8 inch in
10 feet.
D. Ensure floor surfaces are clean and free from dust, paint, oil, grease, curing agents,
parting compounds, surface hardeners, sealers, solvents, old adhesives and other
extraneous substances.
E. Beginning of installation means acceptance of surface and conditions.
INSTALLATION
A. Install flooring in accordance with manufacturer’s printed instructions.
B. Use adhesive recommended by floor tile manufacturer.
C. Clean substrate. Spread adhesive evenly in quantity recommended by flooring
material manufacturer to ensure adhesion over entire area of installation.
Use recommended notched trowel.
D. Set flooring in place, roll and cross roll with 150 lb. sectional roller while adhesive is
still wet to ensure full adhesion.
E. Lay flooring with joints and seams parallel to building lines to produce symmetrical
tile pattern.
F. Terminate flooring at centerline of door openings, where adjacent floor finish is
dissimilar.
G. Install reducer strips at unprotected or exposed edges where flooring terminates.
H. Scribe flooring to walls, columns, cabinets, floor outlets and other appurtenances to
produce tight joints.
PROTECTION
A. Prohibit traffic on finished floor for 48 hours after installation.
CLEANING
A. Remove excess adhesive from floor, base and wall surfaces without damage, while
adhesive is still wet.
B. Clean floor and base surfaces in accordance with manufacturer’s instructions.
25
For more information visit
www.vpif looring.com
Properties and Specs
Installation Accessories
Performance Properties
Installation Accessories
Specifications
(Transitions, Joiners, Reducers, Cove Cap & Cove Stick)
PROPERTIES
PERFORMANCE
GENERAL
Durometer (ASTM D 2240)
83 +/- 3 Shore A
Flame Propagation (UL 992)
< 2.0
WARRANTY
A. Warranty: Includes one-year warranty that products are free from defects in materials
and workmanship.
Smoke Density Test (ASTM E 662)
< 450
Flame Spread (ASTM E 84)
Class II
Critical Radiant Flux (CRF)
(ASTM E 648 or NFPA 253)
Class I (> 0.45 W/cm2)
Chemical Resistance (ASTM F 925)
Passes
Slip Resistance (ASTM D 2047)
0.5 SCOF
CONSTRUCTION
Composition
Thermoplastic rubber/vinyl alloy,
binders, fillers and pigments
Environmental
No lead or other toxic heavy metals
Gauge
Varies; precision control to ensure fit
Linear Feet per Carton
Inquire; usually 240
Width
Varies
INSTALLATION
Adhesive
#180 Contact Cement*
Adhesive Application
Brush; both surfaces
Adhesive Coverage
120 SF/1Gal. or
Approx. 2 Cartons/1 Gal.
* Compatibility and performance using any other adhesive cannot be
guaranteed by VPI Corporation.
PRODUCTS
ACCEPTABLE MANUFACTURERS
A. VPI Corporation, 3123 South 9th Street. P.O. Box 451, Sheboygan, WI 53082-0451
MANUFACTURING TOLERANCES
A. Precision control gauge to assure consistent surface with no high edges.
ADHESIVES
A. Accessories adhesive: VPI #180 Contact Cement.
ENVIRONMENTAL
A. No lead.
B. No heavy metals.
MATERIAL
A. Thermoplastic Rubber (TPR)/Vinyl Alloy to ensure durability.
TECHNICAL PERFORMANCE
A. Hardness: ASTM D 2240 – Shore A Durometer 83 +/- 3
B. Fire Resistance: ASTM E648/NFPA 253 – Critical Radiant Flux – Class 1
C. Smoke Density: ASTM E 662 - <450
D. Chemical Resistance: ASTM F 925 – Passes
E. Slip Resistance: ASTM D 2047 – 0.5 SCOF
EXECUTION
EXAMINATION
A. Ensure sub-floor is clean and free from dirt, paint, oil, grease, old adhesives and other
extraneous substances.
B. Beginning of installation means acceptance of surfaces and conditions.
INSTALLATION
A. Sub-floor and Accessories shall be maintained at a temperature of at least 65F for 24 hours
before installation.
B. Cut to proper length.
C. Follow instructions on VPI #180 label.
D. Avoid getting adhesive on visible surfaces.
E. Roll accessories after installation with a hand roller to ensure good bonding.
PROTECTION
A. Prohibit heavy traffic for 24 hours after installation.
CLEANING
A. Clean with mild detergent and water or Isopropanol.
B. Do not use solvents to clean transitions.
LEED CREDITS
VPI Installation Accessories contributes towards MR credits 5.1, 5.2:
Regional materials: Manufactured in Sheboygan, WI
For more information visit us at www.vpiflooring.com.
26
LEED Credits and FloorScore
VPI – working for
a better tomorrow
Understanding FloorScore
The Need for LEED
A Guide to Flooring’s Impact on Indoor
Air Quality
How the LEED Standard Encourages
Sustainable Building Practices and Materials
FloorScore is a certification system
that helps architects, designers and
other professionals assess different
flooring choices as they relate to
Indoor Air Quality (IAQ). Different
types and amounts of volatile
organic compounds (VOCs) are
emitted at varying levels by different types of flooring, and
these emissions can potentially impact the health of those
who work in those environments.
The Leadership in Energy and
Environmental Design (LEED) Green
Building Rating System is a voluntary
standard that provides a number of norms
and practices for environmentally
sustainable construction. The LEED
standard does several things:
• It defines the term “green building” by establishing a
common standard of measurement
• It promotes integrated, whole-building green design
practices
• It recognizes environmental leadership in the building
industry
• It stimulates green competition
• It raises consumer awareness of green building benefits
• It transforms the building market with greater
environmental awareness
Specifically, FloorScore, developed by the Resilient Floor
Covering Institute (RFCI) and Scientific Certification
Systems (SCS), tests and certifies hard surface flooring and
flooring adhesive products for compliance with IAQ
emissions targets.
VOC emissions of floor coverings and adhesives are
evaluated using health-based criteria. After the evaluation,
those products that perform at or above a benchmark level
may display the FloorScore certification label.
In general, it is widely accepted that floors with the
FloorScore certification help to create a more healthy
working environment by helping to maintain good indoor
air quality. Products bearing the FloorScore label meet the
IAQ criteria of many different organizations, including:
• Collaborative for High Performance Schools (CHPS)
• LEED® Green Building Rating Systems
(The U.S. Green Building Council approved
FloorScore-certified products as an alternative for
compliance with LEED credit IEQ 4.3 Low-Emitting
Materials).
• Green Guide for Health Care
FloorScore also meets the CA Section 01350 Specification,
which includes the Chronic Reference Exposure Levels
(CRELs) concentrations established by the California
Office of Environmental Health Hazard Assessment and
procedures developed by the US EPA.
Benefits of Good Indoor Air Quality
There are obvious benefits of good IAQ. For instance, in
any public facility, good IAQ can:
• Reduce absenteeism
• Improve focus and concentration
• Improve productivity and performance
• Decrease IAQ-related health risks from exposure to
indoor pollutants
• Reduce environmental triggers of asthma
• Reduce respiratory illness
• Help create a healthy, comfortable working environment
LEED-certified buildings use key resources more efficiently
when compared to conventional buildings. LEED-certified
buildings provide healthier work and living environments,
which contributes to higher productivity and improved
employee health and comfort. Different versions of the
rating system are available for specific types of
construction projects. For example, different versions exist
for new construction, existing buildings, commercial
interiors, homes, schools, and so forth.
The LEED Scoring System and Certification
The different LEED versions use a point scoring system,
based on an array of formalized standards in six major
categories:
• Sustainable Sites (SS)
• Water Efficiency (WE)
• Energy and Atmosphere (EA)
• Materials and Resources (MR)
• Indoor Environmental Quality (IEQ)
• Innovation and design process (I)
After passing a minimum required point level, LEED
certification becomes more detailed. For instance, in LEED
NC v2.2 (new construction) there are 69 possible points.
When the points are tallied, a building can qualify for one of
four levels of certification:
Certified: 26-32 points. (The lowest level of certification).
Silver: 33-38 points
Gold: 39-51 points
Platinum: 52-69 points. (The highest level of certification).
Throughout this catalog, LEED credits are indicated next to
each product.
27
Surfacing Everywhere
Healthcare
|
Electronics
Static Control Flooring
|
Wall Base
Education
|
Rubber Flooring
General Purpose
Accessories
Premium Resilient Tile
Complete product information including: architect’s material specifications, installation instructions and maintenance,
recommended adhesives, code and regulation compliance, warranty information and more is available at www.vpiflooring.com.
VPI Product samples are available upon request:
Phone: 800-874-4240
Fax: 920-451-5894
E-mail: [email protected]
Visit: www.vpiflooring.com
For more information visit us at www.vpiflooring.com
Contact us at 800-874-4240 or email [email protected]
VPI Corporation
3123 South 9th Street, P.O. Box 451, Sheboygan, WI 53082-0451
Phone: 920-458-4664 Fax: 920-458-1368
11MK8015-08/08