Selection Guide - Kremlin Rexson Sames Worldwide

Transcription

Making Manufacturers More Competitive™
Selection Guide
Manual airspray
equipment
www.exel-na.com
EXEL North america
EXEL North America, located in Plymouth, Michigan is
the leader of high value added custom and standard
solutions for controlled applications of powders and thick
or thin fluids in the industrial and automotive markets.
Our success is possible because of our strong
commitment to the growth of our employees, who are
carefully chosen for their integrity and mission-to-serve
with a sense-of-urgency attitude.
We are committed to complete
customer satisfaction! We vow
to develop the latest innovations, maintain close relationships with
key influencer's in the industry and
deliver the best solutions for our
customers.
EXEL history dates back to 1925 with
the introduction of the first airspray
John Patry
gun from KREMLIN. SAMES was
President
founded in 1947 and REXSON in
EXEL North America
1954. EXEL expanded into North
America in 1978.
EXEL North America consists of nearly 100 employees with
offices in Plymouth, Michigan; Scarborough, Ontario, Canada;
and Monterrey, Mexico. We have two distinct sales and
service teams for our Wood & General Industry markets and
our Tier 1 & Automotive markets.
EXEL North America is a wholly owned subsidiary of EXEL
INDUSTRIES, a Global company with 21 manufacturing
centers, two in the US, and 23 subsidiaries, three in North
America. For more information go to www.exel-industries.com.
People:
• Integrity
• Solution
• Service
Products:
• Quality
• Innovation
• Performance
Delivering Controlled Applications
Liquid Finishing - Powder Coating - Sealants - Adhesives
Lubricants - Mold Release Agents - Potting - Plural Component Materials
2
CONTENTS
TABLE OF CONTENTS
HTi and HPA Spraying
Coating Viscosity Charts
Gravity-fed spray guns
Pressure-fed HTi spray guns
Pressure-fed HTV spray guns
4-7
8
9 - 11
12 -13
14
Gravity-fed HPA spray guns
15 - 18
Suction-fed HPA spray guns
19 - 21
Pressure-fed HPA spray guns
22 - 25
Aircaps
26 - 27
Aircap kits for HTi, HTV & HPA spray guns
28 - 34
Intensive™ Pumps
35
Diaphragm pumps
36 - 40
Pressure pots
41
Airspray Packages
42
Accessories
43 - 51
Quick Payback & Market Development Literature
52 - 53
EXEL Industries an International Presence
54
EXEL a North American Presence
55
www.exel-na.com
3
HTi, HTV & HPA SPRAYING
High Transfer
Innovation
HTi meets most stringent legislation related
to environmental protection.
New M22HTi spray guns are available in suction, gravity or pressure
versions fed by a pump or pressure pot. Two aircaps are available to
choose from for the best performance, depending on materials
used and the required technology.
Gravity
fed
Performance of the M22 is best for low-viscosity coatings using
the HVLP technology E5 or E3 aircap, which offers exceptional
results in terms of spraying quality and material savings.
Pressure
fed
The LVLP technology EP5 or EP3 aircap provides
better atomization for high-viscosity coatings.
High Transfer
Vortex
M22HTV spray guns is a mix between KREMLIN’s HTi
and Vortex technologies. It is highly recommended for
fluid products or for complex form elements.
High Atomization
Power
Pressure
fed
Pressure
fed
HPA spraying brings together unsurpassed finish quality and
atomization power to apply a wide range of coatings, including
those with high-viscosity materials.
New HPA spray guns are available with gravity or suction cups
based on an operator’s preference. A pressure-fed version is also
available for use with pumps or pressure pots. They are a good
Suction
choice for low to batch production.
fed
4
Gravity
fed
CHARACTERISTICS OF SPRAYING
TECHNOLOGIES
NESHAP
COMPLIANT
HVLP Spray Technology
(HTi - KHVLP aircaps)
Benefit: Savings
AIRCAP AIR PRESSURE
10 psi / 0.7 bar
21 ft/s - 7m/s
FLUID PRESSURE
0 - 60 psi / 0 - 4 bar
TYPICAL ENERGY COST (GUN)
18 cfm / 30.6 m 3/h ≈ $300/yr
LVLP Spray Technology
(HTi - EP aircaps)
Benefit: Blend of Finish Quality & Savings
AIRCAP AIR PRESSURE
10 - 20 psi / 0.7 - 1.5 bar
21 ft/s - 7m/s
FLUID PRESSURE
0 - 60 psi / 0 - 4 bar
12 cfm / 20.4 m 3/h ≈ $200/yr
Conventional Spray Technology
(HPA - all aircaps)
Benefit: Finish Quality
AIRCAP AIR PRESSURE
15 - 25 psi / 1 - 2 bar
30 ft/s - 10m/s
FLUID PRESSURE
0 - 60 psi / 0 - 4 bar
12 cfm / 20.4 m 3/h ≈ $200/yr
* TE = Transfer Efficiency
** Savings = Material and cost savings compared to conventional spray
technology
5
TECHNOLOGIES
Principle
Fine thread
packings
Conventional spraying is the result of the
association of air and a fluid at the outlet
of a gun.
On-line air valve for easy
maintenance
New spraying
aircaps
Progressive fan
adjust knob
This fluid flows through the nozzle under
low pressure and is atomized by a fan of
compressed air coming from the aircap,
at a pressure comprised between 10 and
58 psi (0.7 and 4 bar).
By pulling the trigger, the atomization air
is first released by the air valve then the
fluid is released by the needle.
Lock nut on the fluid
adjustment control
Stainless steel tip
and fluid passages
The complete set, composed of aircap +
nozzle + needle, is called a aircap kit.
i
Ergonomic handle for
maximum comfort
Easy-adjust aircap
Very light trigger
KREMLIN’s
advice
Smooth anodized
coating for
easy cleaning
Built-in control
valve
At the end of the spraying movement, lightly release
the trigger to stop the flow of product and avoid a paint
overload due to a motionless gun.
To have coats of the same thickness, you should :
• maintain the same motion at each pass of the gun
• keep the spray perpendicular to the surface at all times
(see diagram)
Troubleshooting
6
Fan coming out in a curve
Uneven fan
• Turn the aircap by half a turn.
• If the fault is reversed (the curve
appears in the other direction),
check the fanned air outlets for blockage or damage.
• If none of the above are present,
check the nozzle for excessive wear.
Clean the central hole in the aircap
with solvent and the brush provided,
• See that the nozzle is a property
centered in the central hole of the
aircap,
• Increase the amount of drawback
of the needle which can cause a misshaped fan when only slightly open.
Fan narrows in the center
• Reduce the flow of air through
the fanned air outlets
• Increase the flow of paint.
Fan is broader in the
center
• Increase the flow of air
through the fanned air outlets.
• Reduce either the flow of the
paint or its viscosity.
TECHNOLOGIES
Adjustments
Spraying atomization quality is ensured by the
central air outlet. This air outlet is controlled by a
regulator on the air supply or, more delicately, by
adjusting the air control knob at the base of the
gun handle.
Aircap
Needle
Nozzle
Fanned
air outlet
Aircap
Needle
Fanned
air outlet
The shape of the fan - round or flat - and its width
are determined by the air coming from the “horns”
on the aircap. This air is called fan air and can
be adjusted independently, using the knob on the
back of the gun.
Fluid output can be precisely adjusted after you
have chosen a aircap kit and pressure (in the case
of the pressure-fed version), using the fluid valve on
the back of the gun.
Central air
outlet
Nozzle
(You should choose the nozzle that will allow the
needle to be as open as possible to have the right
flow for the fluid you are spraying).
From maintenance to auto body finishing, the wide range of HTI, HTV and HPA spray guns will provide you with the
best designed equipment for all your applications. One of the three spraying types - gravity, suction, pressure can suit the needs of a one-man outfit or a major industrial installation. It now only remains for you to find the gun
and aircap kit that fits the specifications of your application.
Gravity
-
Low material consumption - up to 1 gallon per day
Suitable for slightly and normally reduced material
Viscosity lower than 40 seconds Zahn #2
Ideal for rapid changes to fluid
Cup capacity: 17.5 oz
/
(0.6 liter)
No loss of fluid
Higher fluid flow compared to the suction-fed systems
Easy flushing
-
Low material consumption - up to 1 gallon per day
Suitable for normally to highly reduced materials
Ideal for rapid changes to fluid
Cup capacity: 33 oz.
/
(1.03 qt)
Suitable for fluid with viscosity of less than 25 seconds Zahn #2
-
Fluid consumption starting from 3/4 gallon (96 oz) per day
Suitable for materials with any amount of reduction
Suitable for fluids of any viscosity
High rate of fluid output
Can be used with a pressure pot, piston pump or
diaphragm pump
Suction
Pressure
7
coating viscosity charts
VISCOSITY CONVERSION CHART
AFNOR 4
(CA 4)
ISO 4
mPas.s
Centipoises
Ford 4
(CF 4)
DIN 4
(D˚)
LCH
(Fr)
ZAHN
(#2)
12
—
20
20
10
11
6
18
14
17
25
25
12
12
7
19
16
23
30
30
14
14
—
20
20
24
40
40
18
16
8
22
25
51
50
50
22
20
9
24
29
60
60
60
25
23
10
27
32
68
70
70
28
25
—
30
34
74
80
80
30
26
11
34
37
82
90
90
33
28
12
37
40
93
100
100
35
30
13
41
45
—
120
120
40
34
14
49
50
—
140
140
44
38
15
58
56
—
160
160
50
42
16
66
61
—
180
180
54
45
17
74
66
—
200
200
58
49
18
82
70
—
220
220
62
52
19
—
NOTE: 1 poise = 100 centipoise and 1 mPas.s = 1 centipoise.
THE EFFECTS OF TEMPERATURE ON COATING VISCOSITY
TEMPERATURE
36°
39°
43°
46°
50°
54°
57°
61°
64°
68°
72°
75°
79°
82°
86°
90°
93°
97°
100°
104°
2°
4°
6
8°
10°
12°
14°
16°
18°
20°
22°
24°
26°
28°
30°
32°
33°
36°
38°
40°
27
26
24
23
22
21
21
20
19
18
18
17
17
16
15
15
14
14
14
14
33
31
29
27
26
25
23
22
21
20
19
18
18
17
16
16
15
15
14
14
39
36
34
32
30
28
26
24
23
22
21
20
19
18
17
17
16
15
15
14
46
42
39
34
34
31
29
27
26
24
23
22
21
19
18
17
17
16
15
15
54
19
45
41
38
35
32
30
28
26
24
23
21
20
19
18
17
17
16
15
58
51
47
43
40
36
33
31
29
27
25
23
21
20
20
19
18
17
16
16
61
55
50
46
42
38
35
32
30
28
26
24
22
21
20
19
18
17
16
16
69
63
56
52
46
42
39
35
32
30
28
25
24
23
21
20
19
18
17
16
77
69
62
55
50
46
41
38
35
32
29
27
25
24
22
21
19
18
17
16
84
74
67
61
54
50
44
40
36
34
30
28
26
25
23
22
20
18
17
16
95
84
75
66
60
54
48
44
40
36
33
30
28
26
24
22
20
19
18
17
104
92
81
73
65
58
52
46
42
38
35
31
29
27
24
23
21
20
19
18
VISCOSITIES IN SECONDS ZAHN #2
°F
°C
8
112
100
88
76
69
62
54
49
44
40
36
32
30
27
25
23
21
20
19
18
122
108
90
85
75
66
59
53
47
42
38
35
31
28
26
24
22
21
19
18
132
120
102
90
80
70
63
55
50
44
40
36
33
30
27
25
23
22
20
18
142
124
108
95
84
74
65
58
52
46
41
37
34
31
27
25
23
22
20
18
152
132
119
101
90
80
69
61
54
48
43
38
35
31
28
26
24
23
21
18
164
140
123
106
94
83
73
64
56
50
45
40
36
32
29
27
24
23
21
19
Example : at a temperature of 68°F (20°C), for a target viscosity of 22s,
you could have the following variation in viscosity :
- at 54°F (12°C), a viscosity of 28 s,
- at 90°F (32°C), a viscosity of 17 s.
The M22 G HTi is a gravity fed gun that delivers high finish quality and transfer efficiency with outstanding
operator comfort. This gun is available with one of two aircaps: EP5 for hard to atomize coatings such as
high solids and waterbornes; and an E5 K HVLP for optimizing efficiency and HVLP compliant airspray.
Features
Benefits
New ergonomics and body design
Reduced trigger
Stainless steel wetted parts
Unique aircap design
Reduces the potential for operator injury
from long term use
Compatible with most coatings
Important product savings and
environmental protection
Fine packing adjustment for improved sealing
Allows adjustment without loosening the
retaining ring
Simplified maintenance and easy repair
Acetal resin white cup for water and solventbased materials high density polyacetal
(HDPE) grey cup for pre-catalyzed or
polyurethane materials
Fine thread packing unit
Easy adjust aircap
Fewer components
2 cups available
SPECIFICATIONS
Sprayed materials
Body of the gun
Maximum air inlet pressure
Recommended atomization air pressure
at the gun handle
Air consumption
Weight (with cup)
Maximum fluid temperature
Transfer efficiency in % (EN 13966-1)
Tip
Needle
Wetted parts
Virtually all coatings
Anodized forged aluminum
90 psi
/
(6 bar)
EP5 : 29 - 44 psi
/
(2 - 3 bar)
E5 K HVLP : 22.5 - 37.5 psi
/
(1.5 - 2.5 bar)
EP5 : 11.89 cfm @ 37.5 psi
(20 m3/h @ 2.5 bar)
E5 K HVLP : 16 cfm @ 30 psi
(27.2 m3/h @ 2 bar(1))
24 oz.
/
(680 g)
122°F
/
(50°C)
EP5 : 74 %
E5 K HVLP : 76 %
Stainless steel
Stainless steel
Stainless steel / Aluminum
Gravity-fed HTi spray guns
M22 Gravity HTi
FITTINGS
Fitting
Air Inlet
Fluid inlet (gravity cup)
M 1/4" NPS (+ M 1/4" BSP)
-
(1) (10 psi / 0.7 bar at the aircap - 30 psi / 2 bar at the handle)
NOTE: for HVLP compliance, the maximum inlet air pressure at the gun handle must not exceed 2 bar (29 psi) to maintain 10 psi or
less at the air cap. Testing for HVLP compliance was performed using the specified HVLP test air cap, the fan control fully open and
a pressure gauge on the air inlet fitting at the gun base or handle. It may also be a requirement of some regulatory agencies that
users have the appropriate test air cap available on site to verify that the gun is being operated within the regulatory limitations.
9
M22 Gravity HTi
10
M22 G HTi CONFIGURATION WITH E5 KHVLP AIRCAP
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
> 40 s
Aircap kit*
12
13
14
15
18
22
E5
E5
E5
E5
E5
E5
K
K
K
K
K
K
Cup
HVLP
HVLP
HVLP
HVLP
HVLP
HVLP
Tip size
0.047 in
0.051 in
HDPE
20.2 fl. oz. 0.055 in
0.059 in
(0.6 liters)
0.070 in
(grey)
0.086 in
/
/
/
/
/
/
(1.2
(1.3
(1.4
(1.5
(1.8
(2.2
Fluid output
mm)
mm)
mm)
mm)
mm)
mm)
4.3
5.7
7.3
8.3
8.8
9.5
oz/mn
oz/mn
oz/mn
oz/mn
oz/mn
oz/mn
/
/
/
/
/
/
(128
(170
(216
(245
(260
(280
cc/mn)
cc/mn)
cc/mn)
cc/mn)
cc/mn)
cc/mn)
Fan width at
8 inches /
20 cm (cm)
8.6 in / (22 cm)
9.8 in / (25 cm)
16 cfm @ 30 psi
12.2 in / (31 cm)
(27.2 @ 2 bar(1) 13.8 in / (35 cm)
m3/h)
14.4 in / (36.5 cm)
14.9 in / (38 cm)
Air
consumption
Part number
136-131-101
136-131-102
136-131-103
136-131-104
136-131-105
136-131-106
* includes needle, nozzle and aircap
M22 G HTi configuration WITH EP 5 AIRCAP
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
> 40 s
Aircap kit*
12
13
14
15
18
22
EP 5
EP 5
EP 5
EP 5
EP 5
EP 5
Cup
HDPE
20.2 fl. oz.
(0.6 liters)
(grey)
Tip size
0.047
0.051
0.055
0.059
0.070
0.086
in
in
in
in
in
in
/
/
/
/
/
/
(1.2
(1.3
(1.4
(1.5
(1.8
(2.2
Fluid output
mm)
mm)
mm)
mm)
mm)
mm)
4.7
5.9
7.6
8.6
9.4
9.5
oz/mn
oz/mn
oz/mn
oz/mn
oz/mn
oz/mn
/
/
/
/
/
/
(141
(176
(225
(255
(278
(280
cc/mn)
cc/mn)
cc/mn)
cc/mn)
cc/mn)
cc/mn)
Fan width at
8 inches /
20 cm (cm)
8.3 in / (21 cm)
8.6 in / (22 cm)
11.9 cfm @ 30 psi
11 in / (28 cm)
(20.2 @ 2 bar(1) 11.4 in / (29 cm)
3
m /h)
12 in / (30.5 cm)
12.6 in / (32 cm)
Air consumption
Part number
136-131-111
136-131-112
136-131-113
136-131-114
136-131-115
136-131-116
MAINTENANCE KITS
Description
Seal kit
Repair kit (includes the seal kit)
Part number
129-130-901
129-130-902
The S3 G HTi is our most compact gravity fed gun with outstanding ergonomics. Designed for small hands and
tight areas where touch up or shading is required.
Features
Benefits
This small, lightweight HVLP gun allows the
operator to focus on the application and the
spraying movement for improved quality
Energy savings
Fine adjustment and long lasting components
2 types of application possible :
GAM (flat fan) and GL (line spraying)
Improved application accuracy
Allows aircap adjustment without loosening
the retaining ring
Compatible with solvent and water-based
coatings
Reduced air consumption
In-line air valve assembly
2 different aircaps :
GAM and GL
1 finger trigger
E-Z adjust aircap
HDPE cup
Specifications
Sprayed materials
Primarily a shading gun but will spray
virtually all coatings
Polished forged aluminum
90 psi
/
(6 bar)
22.5 - 37.5 psi
/
(1.5 - 2.5 bar)
4.4 cfm
/ (7.5(1) m3/h)
18.1 oz.
/
(515 g)
90 psi
/
(6 bar)
122 °F
/
(50 °C)
Stainless steel
Stainless steel
Body of the gun
Air consumption
Weight (with cup)
Maximum fluid pressure
Tip
Needle
Wetted parts
Fittings
Fitting
Air Inlet
M 1/4" NPS
-
S3 Gravity HTi
(1) 10 psi (0.7 bar) at the aircap - 30 psi (2 bar) at the handle)
NOTE: for HVLP compliance, the maximum inlet air pressure at the gun handle must not exceed 2 bar (29 psi) to maintain 10 psi or
less at the air cap. Testing for HVLP compliance was performed using the specified HVLP test air cap, the fan control fully open and
a pressure gauge on the air inlet fitting at the gun base or handle. It may also be a requirement of some regulatory agencies that
users have the appropriate test air cap available on site to verify that the gun is being operated within the regulatory limitations.
Configuration of the S3 G HTi spray gun
Max Fluid
viscosity in
CA 4
14 - 20s
14 - 20s
20 - 30s
20 - 40s
Aircap kit*
08
10
12
15
ESG
ESG
ESG
ESG
KHVLP
KHVLP
KHVLP
KHVLP
Cup
Tip size
0.031 in /
HDPE
8.45 fl. oz. 0.039 in /
(0.25L)
0.047 in /
(grey)
0.059 in /
(0.8
(1.0
(1.2
(1.5
Fluid output
mm)
mm)
mm)
mm)
2.3 oz/mn
3.4 oz/mn
4.4 oz/mn
8.3 oz/mn
/
/
/
/
(68 cc/mn)
(100 cc/mn)
(130 cc/mn)
(145 cc/mn)
Air
consumption
4.4 cfm
(7.5 m3/h)
Fan width at
8 inches /
20 cm (cm)
5.5 in / (14 cm)
8.2 in / (21 cm)
9.4 in / (24 cm)
Part number
136-155-112
136-155-113
136-155-114
668-155-115
Seal kits
Description
Seal kit
Part number
129-150-901
129-150-902
11
M22 Pressure HTi
The M22P HTi gun delivers high finish quality and transfer efficiency with outstanding operator comfort.
Available with one of two aircaps ; EP3, for hard to atomize coatings such as high solids and waterbornes
or E3 K HVLP, our highest efficiency and HVLP compliant aircap.
Features
Benefits
reduced trigger effort
Product fluid passages in stainless steel
Reduces the potential for operator injury
from long term use
Compatible with water-based products, etc...
Unsurpassed finish quality with perfectly
balanced fan
Important product savings and environmental
protection
retaining ring
Easy maintenance
High transfer efficiency
Fine thread packing unit
E-Z adjust aircap
Reduced number of components
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
90 psi
/
(6 bar)
22.5 - 37.5 psi
/
(1.5 - 2.5 bar)
90 psi
/
(6 bar)
EP3 : 11.9 - 17.1 cfm /
(20.2 - 29 m3/h)
E3 K HVLP : 13.5 - 19.4 cfm / (23 - 33(1) m3/h)
18.3 oz. / (520 g)
122 °F
/
(50 °C)
EP3 : 72 %
E3 K HVLP : 75 %
Stainless steel
Treated stainless steel
Stainless steel
Weight
Tip
Needle
Wetted parts
FITTINGS
Air Inlet
Fluid Inlet
M 1/4" NPS
M 3/8" NPS
(1) 10 psi (0.7 bar) at the aircap 30 psi (2 bar) at the handle)
CONFIGURATION OF THE M22 P HTi WITH E
HVLP
EP3 3KAIRCAP
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
Aircap kit*
07
09
12
15
18
E3
E3
E3
E3
E3
K
K
K
K
K
HVLP
HVLP
HVLP
HVLP
HVLP
Tip size
0.027
0.035
0.047
0.059
0.071
in
in
in
in
in
/
/
/
/
/
(0.7
(0.9
(1.2
(1.5
(1.8
Fluid output
mm)
mm)
mm)
mm)
mm)
6.7 oz/mn
8.4 oz/mn
10.1 oz/mn
11.8 oz/mn
13.5 oz/mn
/ (200 cc/mn)
/ (250 cc/mn)
/ (300 cc/mn)
/ (350 cc/mn)
/ (400 cc/mn)
Air consumption
13.5
15.3
16.5
18.2
19.4
cfm
cfm
cfm
cfm
cfm
/
/
/
/
/
(23
(26
(28
(31
(33
m /h)
m3/h)
m3/h)
m3/h)
m3/h)
3
Fan width at
8 inches /
20 cm (cm)
12.8 in / (32.5 cm)
14.9 in / (38 cm)
16.5 in / (42 cm)
18.1 in / (46 cm)
18.9 in / (48 cm)
Part number
135-140-201
135-140-202
135-140-203
135-140-206
135-140-207
NOTE: for HVLP compliance, the maximum inlet air pressure at the gun handle must not exceed 2 bar (29 psi) to maintain 10 psi or less at the air cap. Testing for HVLP compliance was performed using the specified HVLP test air cap, the fan control fully open and a pressure gauge on the air inlet fitting at the gun base or handle. It may also be a requirement of some regulatory
agencies that users have the appropriate test air cap available on site to verify that the gun is being operated within the regulatory limitations.
CONFIGURATION OF THE M22 P HTi WITH EP 3 AIRCAP
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
Aircap kit*
07
09
12
15
18
EP 3
EP 3
EP 3
EP 3
EP 3
Tip size
0.027
0.035
0.047
0.059
0.071
in
in
in
in
in
/
/
/
/
/
(0.7
(0.9
(1.2
(1.5
(1.8
Fluid output
mm)
mm)
mm)
mm)
mm)
6.7 oz/mn
8.4 oz/mn
10.1 oz/mn
11.8 oz/mn
13.5 oz/mn
/
/
/
/
/
Air consumption
(200 cc/mn) 11.9 cfm / (20.2 m3/h)
(250 cc/mn) 13.2 cfm / (22.5 m3/h)
(300 cc/mn) 14.1 cfm / (24 m3/h)
(350 cc/mn) 15.9 cfm / (27 m3/h)
(400 cc/mn) 17.1 cfm / (29 m3/h)
Fan width at
8 inches /
20 cm (cm)
11.2 in / (28.5 cm)
13.4 in / (34 cm)
14.6 in / (37 cm)
15.3 in / (39 cm)
16.5 in / (42 cm)
Part number
135-140-211
135-140-212
135-140-213
135-140-216
135-140-217
SEAL KITS
Description
Seal kit
12
Part number
129-130-901
129-140-902
S3 Pressure HTi
Features
Benefits
This small, lightweight HVLP gun allows the
operator to focus on the application and the
spraying movement for improved quality
balanced fan
Allows air cap adjustment without loosening
the retaining ring
Improved comfort for more productivity
E-Z adjust aircap
2-finger trigger
SPECIFICATIONS
Sprayed materials
Primarily shading but will spray
virtually all coatings
90 psi
/
(6 bar)
22.5 - 37.5 psi
/
(1.5 - 2.5 bar)
7.1 cfm
/
(12 m3/h)
13.7 oz.
/
(388 g)
90 psi
/
(6 bar)
122 °F
/
(50 °C)
Stainless steel
Stainless steel
Stainless steel
Body of the gun
Air consumption
Weight
Tip
Needle
Wetted parts
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS
M 1/4" NPS
NOTE: for HVLP compliance, the maximum inlet air pressure at the gun handle must not exceed 2 bar (29 psi) to
maintain 10 psi or less at the air cap. Testing for HVLP
compliance was performed using the specified HVLP test
air cap, the fan control fully open and a pressure gauge
on the air inlet fitting at the gun base or handle. It may
also be a requirement of some regulatory agencies that
users have the appropriate test air cap available on site
to verify that the gun is being operated within the regulatory limitations.
CONFIGURATION OF THE S3 P HTi SPRAY GUN
Max Fluid
viscosity in
CA 4
14-20 s
20-30 s
30-40 s
Aircap kit*
Tip size
Fluid output
08 EPX
KHVLP
10 EPX
KHVLP
12 EPX
KHVLP
0.03 in
(0.8 mm)
0.39 in
(1.0 mm)
0.04 in
(1.2 mm)
10.14 oz/mn
(300 cc/mn)
15.58 oz/mn
(461 cc/mn)
25.15 oz/mn
(745 cc/mn)
Air
consumption
7.1 cfm
(12 m3/h)
Fan width at
8 inches /
20 cm (cm)
7.9 in
(25 cm)
10.2 in
(26 cm)
10.2 in
(26 cm)
Part number
The S3 P HTi is our most compact pressure fed gun with outstanding ergonomics. Designed for small hands and tight
areas where touch-up or shading is required.
135-150-204
135-150-205
135-150-206
SEAL KITS
Description
Seal kit
Part number
129-150-901
129-150-902
13
M22 Pressure HTV
Pressure-fed HTV spray guns
The HTV is a pressure fed gun with outstanding ergonomics that uses Kremlin's unique Vortex technology to spray low
viscosity materials on sharply profiled surfaces. Generally used as a stain gun for wood finishing.
Features
Benefits
Stainless steel product fluid passages
High transfer efficiency
Fine thread packing but
E-Z adjust aircap
Allows the operator to focus on the application and
the spraying movement for improved quality
Compatible with most materials
Perfectly balanced fan allowing unsurpassed
finish quality
Product savings and environmental protection
retaining ring
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight
Tip
Needle
Wetted parts
Varnishes / Stains
90 psi
/
(6 bar)
22.5 - 37.5 psi
/
(1.5 - 2.5 bar)
90 psi
/
(6 bar)
14.1 cfm
/
(24 m3/h) (1)
20.5 oz. / (580 g)
122 °F
/
(50 °C)
65(2)
Stainless steel / PEEK
Stainless steel / PEEK
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS
M 3/8" NPS
(1) 10 psi (0.7 bar) at the aircap - 30 psi (2 bar) at the handle)
(2) with 22-06 nozzle
CONFIGURATION OF THE M22 P HTV GUN WITH EV 3 K HVLP
Max Fluid
viscosity in
CA 4
Aircap kit*
Tip size
Fluid output
Air consumption
14 - 20s
18-04
0.01 in
(0.4 mm)
0.02 in
(0.5 mm)
0.03 in
(0.6 mm)
3.4 oz.mn
(100 cc/mn)
8.1 oz.mn
(240 cc/mn)
10.8 oz.mn
(320 cc/mn)
14.1 cfm
20 - 30s
30 - 40s
18-05
22-06
(24 m3/h)
Fan width at
8 inches /
20 cm (cm)
9.8 in
(25 cm)
10.8 in
(27.5 cm)
11.8 in
(30 cm)
Part number
135-142-201
135-142-202
135-142-203
SEAL KITS
Description
Seal kit
14
Part number
129-130-901
129-140-902
The M22 G HPA is a gravity gun that delivers outstanding finish quality with unsurpassed operator comfort.
Recommended for hard to atomize coatings.
Features
Benefits
Allows the operator to focus on the application
and the spraying movement for improved quality
Perfectly balanced fan unsurpassed
finish quality
retaining ring
Easy maintenance
Polyacetal white cup for water and
solvent-based materials HDPE grey cup for
pre-catalysed or PU materials
Fine thread stuffing box
E-Z adjust aircap
Choice of two 20 oz. (0.6 l) cups available
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
30 - 60 psi / (2 - 4 bar)
15.6 cfm
/
(26.5 m3/h)
23.9 oz.
/
(680 g)
122 °F
/
(50 °C)
65 %
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
M 1/4" NPS (+ M 1/4" BSP)
-
M22 Gravity HPA
CONFIGURATION OF THE M22 HPA GRAVITY
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
> 40 s
Aircap kit*
12
13
14
15
18
22
EN
EN
EN
EN
EN
EN
5
5
5
5
5
5
Cup
HDPE
20.2 fl. oz
0.6L
(grey)
Tip size
0.047
0.051
0.055
0.059
0.070
0.086
in
in
in
in
in
in
/
/
/
/
/
/
(1.2
(1.3
(1.4
(1.5
(1.8
(2.2
Fluid output
mm)
mm)
mm)
mm)
mm)
mm)
4.6 oz/mn /
5.8 oz/mn /
7.9 oz/mn /
8.6 oz/mn /
9.5 oz/mn /
10.1 oz/mn /
(137 cc/mn)
(173 cc/mn)
(234 cc/mn)
(256 cc/mn)
(282 cc/mn)
(300 cc/mn)
Fan width at
8 inches /
20 cm (cm)
8.5 in / (21.5 cm)
9.3 in / (23.5 cm)
15.6 cfm 10.8 in / (27.5 cm)
(26.5 m3/h) 11.8 in / (30 cm)
12.2 in / (31 cm)
12.6 in / (32 cm)
Air
consumption
Part number
136-136-101
136-136-102
136-136-103
136-136-104
136-136-105
136-136-106
SEAL KITS
Description
Seal kit
Part number
129-130-901
129-130-902
15
M22 Gravity HPA GSP
The M22 HPA GSP has our outstanding ergonomic gun body design with a unique combination pressure/gravity cup
for hard to atomize coatings such as high solids and water-born materials.
Features
Benefits
reduces trigger effort
The operator can focus on the spraying and
applying the material, not the weight and stress
of the gun and cup on their body
Full security during application : cup pressure
will never exceed 7.5 psi (0.5 bar)
Full operator safety
Pressure cup fitted with a safety
valve set at 7.5 psi (0.5 bar)
Improved design : the cup is under
pressure during application
Compatible with high viscosity materials (waterbased products, etc...)
balanced fan
retaining ring
Easy maintenance
Fine thread packing nut
E-Z adjust aircap
SPECIFICATIONS
Sprayed materials
Body of the gun
Maximum cup air pressure
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
30 - 60 psi / (2 - 4 bar)
7.5 psi /
(0.5 bar)
15.6 cfm
/
(26.5 m3/h)
25.1 oz.
/
(710 g)
122 °F
/
(50 °C)
65 %
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid inlet (gravity cup - under
pressure)
M 1/4" NPS (+ M 1/4" BSP)
-
CONFIGURATION OF THE M22 G HPA GSP
Fluid viscosity
£3000 cps
Aircap kit*
Cup
Tip size
15 EN5
HDPE
20.2 fl. oz.
0.6L
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
(grey)
0.086 in
(2.2 mm)
18 EN5
22 EN5
Air consumption
15.6 cfm
(26.5 m /h)
3
Fan width at
8 inches /
20 cm (cm)
Part number
11.8 in
(30 cm)
136-138-104
12.2 in
(31 cm)
136-138-105
12.6 in
(32 cm)
136-138-106
SEAL KITS
Description
Seal kit
16
Part number
129-130-901
129-130-902
M22 Gravity BasiK HPA
Features
Benefits
Polished aluminum body
New design of the BA aircap
E-Z adjust aircap
Easy and quick maintenance
Compatible with most material
Spraying quality guaranteed
retaining ring
Can be quickly cleaned
Polyacetal cup 20 oz (0.6 l)
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
30 psi / (2 bar)
16.5 cfm / (28 m3/h)
24.4 oz. / (690 g)
122 °F
/
(50 °C)
65
Stainless steel
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
M 1/4" NPS (+ M 1/4" BSP)
-
CONFIGURATION OF THE M22 G BasiK HPA
Max Fluid
viscosity in
CA 4
Aircap kit*
Cup
Tip size
Fluid output
Air consumption
20 - 40 s
18 BA5
Polyacetal
20.2 fl. oz.
0.6L
0.07 in
(1.8 mm)
9.4 oz/mn
(280 cc/mn)
16.5 cfm
(white)
(28 m3/h)
Fan width at
8 inches /
20 cm (cm)
Part number
12.2 in
(31 cm)
136-137-110
The M22 G Basik HPA is an economy gun with our unsurpassed ergonomic gun body. It is recommended for
low-volume applications requiring good atomization.
SEAL KITS
Description
Seal kit
Part number
129-130-901
129-130-902
17
S3 Gravity HPA
The S3 G HPA is our most compact gun designed for small hands and tight areas where touch-up is required.
Features
Benefits
Energy savings
2 types of application possible : AM (flat fan)
and PGL (special line round fan)
For an improved application accuracy
retaining ring
2 different aircap kits : AM and PGL
1 finger trigger
E-Z adjust aircap
HDPE cup
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
37.5 - 52.5 psi / ( 2.5 - 3.5 bar)
4.7 - 5.8 cfm / (8-10 m3/h)
18.2 oz. / (515 g)
90 psi
/
(6 bar)
122 °F
/
(50 °C)
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
M 1/4" NPS
-
CONFIGURATION OF THE S3 G HPA SPRAY GUN
Max Fluid
viscosity in
CA 4
Aircap kit*
14-20 s
08 AM
20-30 s
10 AM
30-40 s
12 AM
20-30 s
Cup
Tip size
Fluid output
Air consumption
HDPE
20.2 fl. oz.
0.25L
0.03 in
(0.8 mm)
0.39 in
(1.0 mm)
0.04 in
(1.2 mm)
0.39 in
(1.0 mm)
2.9 oz/mn
(86 cc/mn)
4.8 oz/mn
(142 cc/mn)
6.1 oz/mn
(180 cc/mn)
5.0 oz/mn
(148 cc/mn)
6.1 cfm
(10.4 m3/h)
6.1 cfm
(10.4 m3/h)
6.1 cfm
(10.4 m3/h)
2.4 cfm
(4.1 m3/h)
10 PGL
(grey)
Fan width at
8 inches /
20 cm (cm)
5.9 in
(15 cm)
8.6 in
(22 cm)
9.6 in
(24.5 cm)
5.1 in
(13 cm)
SEAL KITS
Description
Seal kit
18
Part number
129-150-901
129-150-902
Part number
136-155-108
136-155-109
136-155-110
136-155-107
M22 A HPA - Suction
The M22 A HPA is a suction fed conventional gun for hard to atomize coatings.
Benefits
Features
balanced fan
retaining ring
Easy maintenance
Fine thread stuffing box
E-Z adjust aircap
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
30 - 45 psi / (2 - 3 bar)
13.5 - 17.5 cfm
/
(23 - 29.7 m3/h)
34.6 oz.
/
(980 g)
122 °F
/
(50 °C)
62 %
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid inlet
SM6 suction cup 33.8 oz / (1l)
M 1/4" NPS (+ M 1/4" BSP)
M 3/8" NPS
CONFIGURATION OF THE M22 A HPA
Max Fluid
viscosity in
CA 4
Aircap kit*
Cup
< 20 s
12 EN 2
33.8 fl. oz.
(1 L)
20 - 40 s
15 EN 2
(aluminum)
18 EN 2
Tip size
Fluid output
Air consumption
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
3.38 oz/mn
(100 cc/mn)
7.54 oz/mn
(223 cc/mn)
9.13 oz/mn
(270 cc/mn)
13.5 cfm
(23 m3/h)
15.9 cfm
(27 m3/h)
17.5 cfm
(29.7 m3/h)
Fan width at
8 inches /
20 cm (cm)
6.3 in
(16 cm)
10.4 in
(26.5 cm)
10.6 in
(27 cm)
Part number
136-145-211
136-145-212
136-145-213
SEAL KITS
Description
Seal kit
Part number
129-130-901
129-140-902
19
M22 A BasiK HPA - suction
The M22 A BasiK HPA is our economy conventional cup gun. It is designed for conventional suction fed
spraying.
Features
Benefits
E-Z adjust aircap
retaining ring
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
37.5 - 52.5 psi / (2.5 - 3.5 bar)
14.1 cfm
/
(24 m3/h)
35.3 oz.
/
(1000 g)
62
122 °F
/
(50 °C)
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS (+ M 1/4" BSP)
M 3/8" NPS
CONFIGURATION OF THE M22 A BasiK HPA
Max Fluid
viscosity in
CA 4
20 - 40 s
Aircap kit*
15 BA2
18 BA2
Cup
33.8 fl. oz.
(1 L)
Tip size
Fluid output
Air consumption
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
7.44 oz/mn
(220 cc/mn)
10.14 oz/mn
(300 cc/mn)
14.1 cfm
(24 m3/h)
14.1 cfm
(24 m3/h)
Fan width at
8 inches /
20 cm (cm)
9.6 in
(24.5 cm)
9.8 in
(25 cm)
SEAL KIT
Description
Seal kit
Repair kit (includes seal kit)
20
Part number
129-130-901
129-140-902
Part number
136-147-201
136-147-202
The S3 A HPA is our most compact suction fed gun with improved ergonomics for small hands and tight
touch-up areas.
Features
Benefits
Energy savings
retaining ring
2-finger trigger
E-Z adjust aircap
HDPE cup
SPECIFICATIONS
Sprayed materials
Body of the gun
Maximum air inlet pressure (bar)
Recommended atomization air pressure (bar)
Air consumption
Weight (with cup)
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
37.5 - 52.5 psi / (2.5 - 3.5 bar)
4.7 - 6.5 cfm
/
(8-11 m3/h)
20.9 oz. / (595 g)
90 psi
/
(6 bar)
122 °F
/
(50 °C)
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid inlet
8.4 oz / (0.25l) HDPE
suction cup
M 1/4" NPS
M 1/4" NPS
CONFIGURATION OF THE S3A HPA SPRAY GUN
Max Fluid
viscosity in
CA 4
Aircap kit*
14-20 s
08 AM
20-30 s
10 AM
30-40 s
12 AM
30-40 s
15 AY
Cup
HDPE
(grey)
Tip size
Fluid output
Air consumption
0.032 in
(0.8 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
2.9 oz/mn
(86 cc/mn)
4.5 oz/mn
(132 cc/mn)
5.4 oz/mn
(159 cc/mn)
6.1 oz/mn
(180 cc/mn)
7.6 cfm
(12.9 m3/h)
7.6 cfm
(12.9 m3/h)
7.6 cfm
(12.9 m3/h)
8.3 cfm
(14.1 m3/h)
Fan width at
8 inches /
20 cm (cm)
5.9 in
(15 cm)
6.7 in
(17 cm)
7.5 in
(19 cm)
7.9 in
(20 cm)
S3 A HPA - suction
Part number
136-150-208
136-150-209
136-150-210
136-150-211
SEAL KITS
Description
Seal kit
Part number
129-150-901
129-150-902
21
M22 P HPA
- conventional gun
The M22 P HPA uses our new gun body design for outstanding operator comfort. Designed for high-volume
conventional spray applications.
Features
Benefits
reduces trigger effort
of the gun on their body
balanced fan
retaining ring
Easy maintenance
Stainless steel fluid passages
Fine thread packing nut
E-Z adjust aircap
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight
Tip
Needle
Wetted parts
Forged aluminum
90 psi
/
(6 bar)
22.5 - 37.5 psi / ( 1.5 - 2.5 bar)
90 psi
/
(6 bar)
16.5 - 21.2 cfm
/
(28 - 36.1 m3/h)
18.3 oz. / (520 g)
122 °F
/
(50 °C)
EN3 : 63 %
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS
M 3/8" NPS
CONFIGURATION OF THE M22 P HPA spray gun
Max Fluid
viscosity in
CA 4
< 20 s
Aircao kit*
Tip size
Fluid output
Air consumption
07 EN 3
0.027 in
(0.7 mm)
0.0345 in
(0.9 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
6.7 oz/mn
(200 cc/mn)
8.5 oz/mn
(250 cc/mn)
10.1 oz/mn
(300 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
16.5 cfm
(28 m3/h)
17.6 cfm
(30 m3/h)
19.1 cfm
(32.5 m3/h)
20 cfm
(34 m3/h)
21.2 cfm
(36.1 m3/h)
09 EN 3
12 EN 3
20 - 40 s
15 EN 3
18 EN 3
Fan width at
8 inches /
20 cm (cm)
10.8 in
(27.5 cm)
12.2 in
(31 cm)
13.8 in
(35 cm)
14.1 in
(36 cm)
15.3 in
(39 cm)
Part number
135-145-201
135-145-202
135-145-203
135-145-206
135-145-207
SEAL KITS
Description
Seal kit
22
Part number
129-130-901
129-140-902
M22 P BasiK HPA
The M22 P Basic HPA is our economy conventional gun with unsurpassed ergonomics. It is designed for
high-volume conventional spray applications.
Features
Benefits
E-Z adjust aircap
retaining ring
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
27 - 60 psi / (1.8 - 4 bar)
18.2 cfm / (31 m3/h)
18.7 oz. / (530 g)
90 psi
/
(6 bar)
63
122 °F
/
(50 °C)
Stainless steel
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS
M 3/8" NPS
CONFIGURATION OF THE M22 P BasiK HPA
Max Fluid
viscosity in
CA 4
Aircap kit*
Tip size
Fluid output
Air consumption
< 20 s
09 BA3
0.035 in
(0.9 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
8.5 oz/mn
(250 cc/mn)
9.1 oz/mn
(270 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
17.7 cfm
(30 m3/h)
18.2 cfm
(31 m3/h)
18.8 cfm
(32 m3/h)
18.8 cfm
(32 m3/h)
12 BA3
20 - 40 s
15 BA3
18 BA3
Fan width at
8 inches /
20 cm (cm)
12.2 in
(31 cm)
12.6 in
(32 cm)
14.2 in
(36 cm)
15.3 in
(39 cm)
Part number
135-147-205
- conventional gun
135-147-206
135-147-207
135-147-208
SEAL KITS
Description
Seal kit
Part number
129-130-901
129-140-902
23
M22 P WBE HPA
- Abrasive coatings
The M22 P WBE HPA uses our new gun body design for outstanding operator comfort. It delivers high-volume
pressure fed conventional spraying for highly abrasive water-based coatings such as porcelain enamels.
Features
Benefits
Polyurethane needle tip and treated metal
needle rod and nozzle
Compatible with water-based materials
Wear caused by the use of abrasive products
is reduced
SPECIFICATIONS
Sprayed materials
Body of the gun
Inlet air pressure
Air consumption
Weight
Tip
Needle
Wetted parts
Water-based abrasive coatings, porcelain enamels
90 psi
/
(6 bar)
37.5 - 52.5 psi
/ (2.5 - 3.5 bar)
16.9 - 21.2 cfm
/
(17.5 - 36.1 m3/h)
18.3 oz. / (520 g)
122 °F
/
(50 °C)
63 %
Treated metal
Treated metal
Stainless steel / Polyurethane
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4'' NPS
M 3/8'' NPS
CONFIGURATION OF THE M22P WBE HPA SPRAY GUN
Max Fluid
viscosity in
CA 4
< 20s
Aircap kit*
Tip size
Fluid output
Air consumption
Fan width
Part number
07 EN3
0.027 in
(0.7 mm)
0.035 in
(0.9 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
0.090 in
(2.3 mm)
6.7 oz/mn
(200 cc/mn)
8.4 oz/mn
(250 cc/mn)
10.1 oz/mn
(300 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
13.5 oz/mn
(400 cc/mn)
16.5 cfm
(28 m3/h)
17.7 cfm
(30 m3/h)
19.1 cfm
(32.5 m3/h)
20 cfm
(34 m3/h)
21.2 cfm
(36.1 m3/h)
10.3 cfm
(17.5 m3/h)
10.8 in
(27.5 cm)
12.2 in
(31 cm)
13.8 in
(35 cm)
14.1 in
(36 cm)
15.3 in
(39 cm)
14.1 in
(36 cm)
135-148-201
09 EN3
12 EN3
20 - 40s
15 EN3
18 EN3
> 40s
23 ER3
135-148-202
135-148-203
135-148-206
135-148-207
135-148-208
SEAL KITS
Description
Seal kit
Needle tip kit for nozzles sized 7 to 23 (x10)
24
Part number
129-130-901
129-140-902
129-417-005
S3 P HPA
The S3 P HPA is our most compact pressure fed gun with outstanding ergonomics for small hands
and tight touch-up areas.
Features
Benefits
E-Z adjust aircap
2-finger trigger
balanced fan
retaining ring
Energy savings
SPECIFICATIONS
Sprayed materials
Body of the gun
Air consumption
Weight
Tip
Needle
Wetted parts
90 psi
/
(6 bar)
45 psi
/
(3 bar)
5.9 cfm
/
(10 m3/h)
13.6 oz.
/
(387 g)
90 psi
/
(6 bar)
122 °F
/
(50 °C)
Stainless steel
Stainless steel
Stainless steel
FITTINGS
Fitting
Air Inlet
Fluid Inlet
M 1/4" NPS
M 1/4" NPS
CONFIGURATION OF THE S3 P HPA SPRAY GUN
Max Fluid viscosity
in
CA 4
-
Aircap kit*
08 PX
14-20 s
(flat spray)
10 PX
20-30 s
(flat spray)
12 PX
30-40 s
(flat spray)
10 PGL
20-30 s
(round spray internal mix)
Tip size
Fluid output
Air consumption
Fan width at 20 cm
(cm)
0.03 in
(0.8 mm)
0.39 in
(1.0 mm)
0.04 in
(1.2 mm)
10.4 oz/mn
(307 cc/mn)
17.1 oz/mn
(506 cc/mn)
24.7 oz/mn
(731 cc/mn)
5.9 cfm
(10 m3/h)
5.9 cfm
(10 m3/h)
5.9 cfm
(10 m3/h)
9.1 in
(23 cm)
9.3 in
(23.5 cm)
9.8 in
(25 cm)
135-150-201
0.39 in
(1.0 mm)
5 oz/mn
(148 cc/mn)
2.4 cfm
(4 m3/h)
5.1 in
(13 cm)
135-150-207
Part number
-conventional gun
135-150-200
135-150-202
135-150-203
SEAL KITS
Description
Seal kit
Part number
129-150-901
129-150-902
25
Aircaps - M22 airspray guns
Aircaps
AIRCAPS FOR HTi AND HTV AIRSPRAY GUNS
Guns
Part number
Fan shape
Atomization type
Atomization quality
Transfer efficiency
Air consumption
@ 30 psi (2 bar)
Nozzle size
E3 K HVLP
E5 K HVLP
EP 3
EP 5
EV 3
M22 P HTi
132-140-100
M22 G HTi
132-130-100
M22 P HTi
132-140-300
M22 G HTi
132-130-300
M22 P HTV
132-142-100
Flat swirling fan
HTI
Outstanding
74 %
11.9 - 17.1 cfm
(20.2 - 29 m3/h)
07-18
74 %
11.9 cfm
(20.2 m3/h)
12-22
65 %
14.1 cfm
(24 m3/h)
04-06
Flat
76 %
13.5 - 19.4 cfm
(23 - 33 m3/h)
07-18
76 %
16 cfm
(27.2 m3/h)
12-22
AIRCAPS FOR HPA AIRSPRAY GUNS
Guns
Part number
Fan shape
Atomization type
Atomization quality
Transfer efficiency
Air consumption
@ 30 psi (2 bar)
Nozzle size
EN5
EN2
EN 3
M22 G HPA
132-130-200
Flat
HPA
Very Good
65 %
15.6 cfm
(26.5 m3/h)
12-22
M22 A HPA
132-145-100
Flat
HPA
Very Good
62 %
13.5 - 17.5 cfm
(23 - 29.7 m3/h)
12-18
M22 P HPA
132-140-200
Flat
HPA
Very Good
63 %
16.5 - 21.2 cfm
(28 - 36.1 m3/h)
07-18
ER 1
Guns
Part number
Fan shape
Atomization type
Atomization
quality
Nozzle size
M22 A HPA
132-145-800
ER 3
ER 4
132-145-200
Flat
Conventional
132-145-300
Very good
23-27
23-27
23-27
ER 9
ES 3
M22 P HPA
132-145-500
132-145-400
Round
Flat
Conventional
Conventional
ES 9
EG 1
132-145-600
Round
Conventional
132-145-700
Flat
Conventional
Outstanding
Good
Very good
Outstanding
23-27
33-40
33-40
15-18
AIRCAPS FOR HPA BASIK AIRSPRAY GUNS
26
Guns
Part number
Fan shape
Atomization type
Atomization quality
Transfer efficiency
Air consumption
@ 30 psi (2 bar)
Nozzle size
BA 5
BA 2
BA 3
M22 G BasiK HPA
132-137-300
Flat
HPA
Good
65 %
16.5 cfm
(28 m3/h)
18
M22 A BasiK HPA
132-147-100
Flat
HPA
Good
62 %
14.1 cfm
(24 m3/h)
15-18
M22 P BasiK HPA
132-147-200
Flat
HPA
Good
63 %
18.8 cfm
(32 m3/h)
09-12-15-18
Aircaps - S3 airspray guns
Guns
Part number
Fan shape
Atomization type
Atomization quality
Air consumption
@ 2 bar
Nozzle size
ESG K HVLP
EPX K HVLP
S3 G HTi
132-150-200
Flat
HTi
Very High
4.4 cfm
(7.5 m3/h)
08-12
S3 P HTi
132-150-100
Flat
HTi
Very High
7.1 cfm
(12 m3/h)
08-12
Aircaps
AIRCAPS FOR HTi AIRSPRAY GUNS
Guns
Part number
Fan shape
Atomization type
Atomization quality
Transfer efficiency
Air consumption
@ 2 bar
Nozzle size
AM
AM
AY
PX
S3 G HPA
132-630-400
Flat
HPA
Very good
72 %
5.8 cfm
(10 m3/h)
08-12
S3 A HPA
132-630-400
Flat
HPA
Very good
52 %
7.6 cfm
(13 m3/h)
08-15
S3 A HPA
132-630-200
Flat
HPA
Very good
54 %
8.2 cfm
(14 m3/h)
15
S3 P HPA
132-631-100
Flat
HPA
Very good
76 %
5.8 cfm
(10 m3/h)
08-12
AIRCAPS FOR HPA AIRSPRAY GUNS - AIRCAPS FOR LINE
PGL
Guns
Part number
Fan shape
Atomization type
Atomization quality
Nozzle size
S3 G HPA
132-640-100
Line
HPA
Very good
10
S3 P HPA
132-640-100
Line
HPA
Very good
10
27
Aircap kits - M22 airspray guns
Aircap kits for M22 G HTi spray guns
Aircap kits
Aircaps kits for gravity M22 HTi E5 KHVLP
Max Fluid
viscosity
in CA 4
< 20 s
20 - 40 s
> 40 s
Tip size
0.04 in
(1.2 mm)
0.05 in
(1.3 mm)
0.06 in
(1.4 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
0.09 in
(2.2 mm)
Fan width at
8 inches /
Aircap kit*
(20 cm (cm))
8.6 in
(22 cm)
9.8 in
(25 cm)
12.2 in
(31 cm)
13.8 in
(35 cm)
14.4 in
(36.5 cm)
14.9 in
(38 cm)
12 E5
KHVLP
13 E5
KHVLP
14 E5
KHVLP
15 E5
KHVLP
18 E5
KHVLP
22 E5
KHVLP
Air
consumption
16 cfm
(27.2 m3/h)
Fluid output
oz/mn
(cc/mn)
Part number
kit
4.3 oz/mn
(128 cc/mn)
5.7 oz/mn
(170 cc/mn)
7.3 oz/mn
(216 cc/mn)
8.3 oz/mn
(245 cc/mn)
8.8 oz/mn
(260 cc/mn)
9.5 oz/mn
(280 cc/mn)
031-130-001
Aircap
033-130-100
031-130-002
031-130-003
031-130-004
Needle
132-130-100
Nozzle
134-130-300
134-130-400
134-130-500
033-130-200
031-130-005
134-130-600
134-130-700
033-130-300
031-130-006
(1)
134-130-800
Needle
Nozzle
Aircaps kits for gravity M22 HTi EP5
Max Fluid
viscosity
in CA 4
< 20 s
20 - 40 s
> 40 s
Tip size
0.04 in
(1.2 mm)
0.05 in
(1.3 mm)
0.06 in
(1.4 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
0.09 in
(2.2 mm)
Fan width at
Fluid output
Air
8 inches /
Aircap kit* consumption
oz/mn
(20 cm (cm))
(cc/mn)
8.3 in
4.7 oz/mn
12 EP 5
(21 cm)
(141 cc/mn)
8.6 in
5.9 oz/mn
13 EP 5
(22 cm)
(176 cc/mn)
11 in
7.6 oz/mn
14 EP 5
11.9 cfm
(28 cm)
(225 cc/mn)
11.4 in
8.6 oz/mn
(20.2 m3/h)
15 EP 5
(29 cm)
(255 cc/mn)
12 in
9.4 oz/mn
18 EP 5
(30.5 cm)
(278 cc/mn)
12.6 in
9.4 oz/mn
22 EP 5
(32 cm)
(280 cc/mn)
(1) polyacetal end needle
28
Part number
kit
Aircap
031-130-011
033-130-100
031-130-012
031-130-013
031-130-014
132-130-300
134-130-400
134-130-500
033-130-200
031-130-015
031-130-016
134-130-300
134-130-600
134-130-700
033-130-300
(1)
134-130-800
Aircaps kits for pressure M22 HTi E3 KHVLP
Max Fluid
viscosity
in CA 4
< 20 s
20 - 40 s
Tip size
0.02 in
(0.7 mm)
0.04 in
(0.9 mm)
0.04 in
(1.2 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
Fan width at
8 inches /
(20 cm (cm))
12.8 in
(32.5 cm)
15 in
(38 cm)
16.5
(42 cm)
18.1 in
(46 cm)
18.9 in
(48 cm)
Air
07 E3
KHVLP
09 E3
KHVLP
12 E3
KHVLP
15 E3
KHVLP
18 E3
KHVLP
13.5 cfm
(23 m3/h)
15.3 cfm
(26 m3/h)
16.5 cfm
(28 m3/h)
18.2 cfm
(31 m3/h)
19.4 cfm
(33 m3/h)
Fluid output
oz/mn
(cc/mn)
6.7 oz/mn
(200 cc/mn)
8.4 oz/mn
(250 cc/mn)
10.1 oz/mn
(300 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
Part number
kit
Treated
needle
Aircap
Nozzle
031-140-001
134-130-100
031-140-002
033-140-100 134-130-200
031-140-003
132-140-100
031-140-006
134-130-300
033-140-200
031-140-007
134-130-600
134-130-700
Aircaps kits for pressure M22 HTi EP3
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
Tip size
0.02 in
(0.7 mm)
0.04 in
(0.9 mm)
0.04 in
(1.2 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
Fan width at
8 inches /
(20 cm (cm))
11.2 in
(28.5 cm)
13.4 in
(34 cm)
14.6 in
(37 cm)
15.4 in
(39 cm)
16.5 in
(42 cm)
Fluid output
Air
oz/mn
(cc/mn)
11.9 cfm
6.7 oz/mn
07 EP 3
(20.2 m3/h) (200 cc/mn)
13.2 cfm
8.4 oz/mn
09 EP 3
(22.5 m3/h) (250 cc/mn)
10.1 oz/mn
14.1 cfm
12 EP 3
(300 cc/mn)
(24 m3/h)
11.8 oz/mn
15.9 cfm
15 EP 3
(350 cc/mn)
(27 m3/h)
13.5 oz/mn
17.1 cfm
18 EP 3
(400 cc/mn)
(29 m3/h)
Part number
kit
Aircap
Treated needle
Nozzle
134-130-100
031-140-011
033-140-100
031-140-012
031-140-013
Aircap kits
Aircap kits for M22 P HTI spray guns
132-140-300
031-140-016
134-130-300
033-140-200
031-140-017
134-130-200
134-130-600
134-130-700
Aircap kits for M22 P HTV spray guns
Aircaps kits for M22 P HTV SPRAY GUNS
Max Fluid
viscosity in
CA 4
Tip size
14-20 s
18/04
20-30 s
18/05
30-40 s
22/06
Fan width at
8 inches / Air consumption
20 cm (cm)
9.8 in
(25 cm)
14.1 cfm
10.5 in
(27.5 cm)
(24 m3/h)
11.5 in
(30 cm)
Fluid output
3.38 oz/mn
(100 cc/mn)
8.1 oz/mn
(240 cc/mn)
10.8 oz/mn
(320 cc/mn)
Aircap
Treated needle
Nozzle assembly
134-142-100
132-142-100
033-142-100
134-142-200
134-142-300
29
Aircap kits
Aircap kits for S3 G HTi spray guns
Aircaps kits FOR S3 G HTi spray guns
Max Fluid
viscosity in
CA 4
<20 s
14 - 20s
20 - 40s
Tip size
0.03 in
(0.8 mm)
0.04in
(1.0 mm)
0.05 in
(1.2 mm)
Fan width at
8 inches /
20 cm (cm)
5.5 in
(14 cm)
8.3 in
(21 cm)
9.4 in
(24 cm)
Air
Fluid output
08 ESG
KHVLP
10 ESG
KHVLP
12 ESG
KHVLP
4.4 cfm
(7.5 m3/h)
2.29 oz/mn
(68 cc/mn)
3.38 oz/mn
(100 cc/mn)
4.40 oz/mn
(130 cc/mn)
Part number
kit
Aircap
Needle
Nozzle
031-150-012
132-150-200
033-150-100
134-630-400
031-150-013
132-150-200
033-150-500
134-630-100
031-150-014
132-150-200
033-150-200
134-630-200
Aircap kits for S3 P HTi spray guns
Aircaps kits FOR S3 P HTi spray guns
Max Fluid
viscosity in
CA 4
14-20
20-40
20-40
Tip size
0.03 in
(0.8 mm)
0.04in
(1.0 mm)
0.05 in
(1.2 mm)
Fan width at
8 inches /
20 cm (cm)
9.8 in
(25 cm)
10.2 in
(26 cm)
10.2 in
(26 cm)
Air
Fluid output
08 EPX
K HVLP
10 EPX
K HVLP
12 EPX
K HVLP
7.1 cfm
(12 m3/h)
2.7 oz/mn
(80 cc/mn)
3.1 oz/mn
(92 cc/mn)
4.4 oz/mn
(131 cc/mn)
Part number
kit
Aircap
Needle
Nozzle
031-150-004
132-150-100 033-150-100
134-630-400
031-150-005
132-150-100 033-150-500
134-630-100
031-150-006
132-150-100 033-150-200
134-630-200
Aircap kits for M22 G & M22 GSP HPA spray guns
Aircaps kits FOR M22 G HPA SPRAY GUNS
Max Fluid
viscosity in
CA 4
< 20 s
20 - 40 s
> 40 s
Tip size
0.04 in
(1.2 mm)
0.05 in
(1.3 mm)
0.06 in
(1.4 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
0.08 in
(2.2 mm)
Fan width at
8 inches /
20 cm (cm)
8.5 in
(21.5 cm)
9.3 in
(23.5 cm)
10.8 in
(27.5 cm)
11.8 in
(30 cm)
12.2 in
(31 cm)
12.6 in
(32 cm)
Air
12 EN 5
13 EN 5
14 EN 5
15.6 cfm
15 EN 5
(26.5 m3/h)
18 EN 5
22 EN 5
Fluid output
Part number
kit
4.6 oz/mn
(137 cc/mn)
5.8 oz/mn
(173 cc/mn)
7.9 oz/mn
(234 cc/mn)
8.6 oz/mn
(256 cc/mn)
9.5 oz/mn
(282 cc/mn)
10.1 oz/mn
(300 cc/mn)
031-135-001
Aircap
033-130-100
031-135-002
031-135-003
031-135-004
Needle
132-130-200
Nozzle
134-130-300
134-130-400
134-130-500
033-130-200
031-135-005
134-130-600
134-130-700
033-130300 (1)
031-135-006
134-130-800
Aircaps kits FOR M 22 GSP HPA SPRAY GUNS
Max Fluid
viscosity in
CA 4
20 - 40 s
20 - 40 s
> 40 s
Tip size
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
0.08 in
(2.2 mm)
Fan width at
8 inches /
20 cm (cm)
11.8 in
(30 cm)
12.2 in
(31 cm)
12.6 in
(32 cm)
30
Air
22 EN 5
Aircap
031-135-004
15 EN 5
18 EN 5
Part number
kit
15.6 cfm
(26.5 m3/h)
031-135-005
031-135-006
132-130-200
Needle
Nozzle
033-130-200
033-130-300
(1)
134-130-600
134-130-700
134-130-800
Aircap kits for M22 G BasiK HPA spray guns
Aircaps kits for M22 G BasiK HPA guns
Max Fluid
viscosity in
CA 4
20-40
Fan width at
8 inches /
(20 cm (cm))
0.07 in
12.2 in
(1.8 mm)
(31 cm)
Tip size
Air
Fluid output
(cc/mn)
18 BA 5
16.5 cfm
(28 m3/h)
9.4 oz/mn
(280 cc/mn)
Part number
kit
031-137-010
Aircap
Needle
Nozzle
132-137-300 033-130-200 134-130-700
Aircap kits for M22 A HPA spray guns
Aircap kits
Aircaps kits for M22 A HPA GUNS
Max Fluid
viscosity
in CA 4
< 20 s
20 - 40 s
> 40 s
Tip size
0.04 in
(1.2 mm)
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
0.09 in
(2.3 mm)
0.10 in
(2.7 mm)
Fan width at
8 inches /
20 cm (cm)
6.3 in
(16 cm)
10.4 in
(26.5 cm)
10.6 in
(27 cm)
11.8 in
(30 cm)
12.6 in
(32 cm)
Air
12 EN 2
15 EN 2
18 EN 2
23 ER 1
27 ER 1
13.5 cfm
(23 m3/h)
15.9 cfm
(27 m3/h)
17.5 cfm
(29.7 m3/h)
11.2 cfm
(19 m3/h)
11.7 cfm
(20 m3/h)
Fluid output
Part number
kit
3.38 oz/mn
(100 cc/mn)
7.54 oz/mn
(223 cc/mn)
9.13 oz/mn
(270 cc/mn)
10.82 oz/mn
(320 cc/mn)
11.49 oz/mn
(340 cc/mn)
031-145-011
031-145-012
Aircap
031-145-031
Nozzle
033-140-100 134-130-300
132-145-100
031-145-013
031-145-030
Treated
needle
033-140-200
132-145-800 033-140-300
134-130-600
134-130-700
134-131-100
134-131-200
(1) Polyacetal end needle. For the M22 gun, needles from 22-40 have the poly tip.
Aircap kits for M22 A BasiK HPA spray guns
Aircaps kits for M22 A BasiK HPA GUNS
Max Fluid
viscosity
in CA 4
20-40
20-40
Tip size
0.06 in
(1.5 mm)
0.07 in
(1.8 mm)
Fan width at
8 inches /
20 cm (cm)
9.6 in
(24.5 cm)
9.8 in
(25 cm)
Aircap kit*
Air
consumption
Fluid output
Part number
kit
15 BA 2
14.1 cfm
(24 m3/h)
14.1 cfm
(24 m3/h)
7.44 oz/mn
(220 cc/mn)
10.14 oz/mn
(300 cc/mn)
031-147-001
132-147-100 033-140-200 134-130-600
031-147-002
132-147-100 033-140-200 134-130-700
18 BA 2
Aircap
Treated
needle
Nozzle
31
Aircap kits for M22 P HPA spray guns
Aircap kits
Aircaps kits for M22 p HPA spray guns
Max Fluid
viscosity
in CA 4
< 20 s
20 - 40 s
> 40 s
> 5000
cps
Tip size
0.027 in
(0.7 mm)
0.035 in
(0.9 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
0.091 in
(2.3 mm)
0.106 in
(2.7 mm)
0.091 in
(2.3 mm)
0.106 in
(2.7 mm)
0.091 in
(2.3 mm)
0.106 in
(2.7 mm)
0.129 in
(3.3 mm)
0.157 in
(4.0 mm)
0.129 in
(3.3 mm)
0.157 in
(4.0 mm)
Fan width at
8 inches / Aircap kit* Air consumption
(20 cm (cm))
10.8 in
15.6 cfm
07 EN 3
(27.5 cm)
(28 m3/h)
12.2 in
17.6 cfm
09 EN 3
(31 cm)
(30 m3/h)
13.8 in
19.1 cfm
12 EN 3
(35 cm)
(32.5 m3/h)
14.2 in
20.0 cfm
15 EN 3
(36 cm)
(34 m3/h)
15.4 in
21.2 cfm
18 EN 3
(39 cm)
(36.1 m3/h)
10.3 cfm
23 ER 3
(17.5 m3/h)
14.2 in
(36 cm)
10.5 cfm
27 ER 3
(17.9 m3/h)
12.1 cfm
23 ER 4
(20.6 m3/h)
9.1 in
(23 cm)
12.3 cfm
27 ER 4
(20.9 m3/h)
4.7 in
8.0 cfm
23 ER 9
(12 cm)
(13.6 m3/h)
5.9 in
8.2 cfm
27 ER 9
(15 cm)
(13.9 m3/h)
12.9 cfm
33 ES 3
(22 m3/h)
14.2 in
(36 cm)
12.9 cfm
40 ES 3
(22 m3/h)
4.7 in
12.9 cfm
33 ES 9
(12 cm)
(22 m3/h)
5.9 in
12.9 cfm
40 ES 9
(15 cm)
(22 m3/h)
Fluid output
Part number
kit
6.7 oz/mn
(200 cc/mn)
8.4 oz/mn
(250 cc/mn)
10.1 oz/mn
(300 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
13.5 oz/mn
(400 cc/mn)
16.9 oz/mn
(500 cc/mn)
13.5 oz/mn
(400 cc/mn)
18.59 oz/mn
(550 cc/mn)
12.2 oz/mn
(360 cc/mn)
13.5 oz/mn
(400 cc/mn)
10.1 oz/mn
(300 cc/mn)
15.9 oz/mn
(470 cc/mn)
23.7 oz/mn
(700 cc/mn)
25.4 oz/mn
(750 cc/mn)
031-145-001
Aircap
Treated needle
134-130-100
033-140-100
031-145-002
031-145-003 132-140-200
033-140-200
031-145-007
031-145-015
031-145-016
031-145-017
031-145-020
031-145-021
031-145-018
031-145-019
031-145-022
031-145-023
134-130-200
134-130-300
031-145-006
031-145-014
Nozzle
134-130-600
134-130-700
134-131-100
132-145-200
134-131-200
132-145-300 033-140-300
134-131-100
134-131-200
134-131-100
132-145-500
134-131-200
134-131-300
132-145-400
033-140-400
(1)
132-145-600
134-131-400
134-131-300
134-131-400
(1) Polyacetal end needle. For the M22 gun, needles from 22-40 have the poly tip.
Aircap kits FOR PRESSURE-FED M22 HPA SPRAY GUNS FOR GLUES
Max Fluid
viscosity
in CA 4
> 30s
Tip size
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
Fan width at
(20 cm (cm))
14.2 in
11.2 cfm
15 EG 1
(36 cm)
19.1 m3/h)
15.4 in
11.8 cfm
18 EG 1
(39 cm)
(20.1 m3/h)
Fluid output
Part number
kit
350
031-145-024
400
031-145-025
Aircap
Treated
needle
132-145-700 033-140-200
Nozzle
134-131-500
Aircap kits for M22 P BasiK HPA spray guns
Aircap kits for M22 P BasiK HPA spray guns
Max Fluid
viscosity
in CA 4
<20
20-40
Tip size
0.035 in
(0.9 mm)
0.047 in
(1.2 mm)
Fan width at
(20 cm (cm))
12.2 in
17.6 cfm
09 BA 3
(31 cm)
(30 m3/h)
12.6 in
18.2 cfm
12 BA 3
(32 cm)
(31 m3/h)
Fluid output
Part number
kit
8.4 oz/mn
(250 cc/mn)
9.1 oz/mn
(270 cc/mn)
031-147-005
132-147-200 033-140-100
134-130-200
031-147-006
132-147-200 033-140-100
134-130-300
Aircap
Treated
needle
Nozzle
Aircap kits for M22 WBE HPA spray guns
Aircap kits FOR M22 WBE HPA SPRAY GUNS
Max Fluid
viscosity
in CA 4
< 20s
20 - 40s
32
> 40s
Tip size
0.027 in
(0.7 mm)
0.035 in
(0.9 mm)
0.047 in
(1.2 mm)
0.059 in
(1.5 mm)
0.070 in
(1.8 mm)
0.091 in
(2.3 mm)
Fan width at
(20 cm (cm))
10.8 in
16.4 cfm
07 EN 3
(27.5 cm)
(28 m3/h)
12.2 in
17.7 cfm
09 EN 3
(31 cm)
(30 m3/h)
13.8 in
19.1 cfm
12 EN 3
(35 cm)
(32.5 m3/h)
14.2 in
20 cfm
15 EN 3
(36 cm)
(34 m3/h)
15.4 in
21.2 cfm
18 EN 3
(39 cm)
(36.1 m3/h)
14.2 in
10.3cfm
23 ER 3
(36 cm)
(17.5 m3/h)
Fluid output
Part number
kit
Aircap
Needle
Nozzle
6.7 oz/mn
(200 cc/mn)
8.4 oz/mn
(250 cc/mn)
10.1 oz/mn
(300 cc/mn)
11.8 oz/mn
(350 cc/mn)
13.5 oz/mn
(400 cc/mn)
13.5 oz/mn
(400 cc/mn)
031-148-001
032-140-200
033-140-100
034-135-100
031-148-002
032-140-200
033-140-100
034-135-200
031-148-003
032-140-200
033-140-100
034-135-300
031-148-006
032-140-200
033-140-200
034-135-600
031-148-007
032-140-200
033-140-200
034-135-700
031-148-009
032-145-200
033-140-300
034-136-100
Aircap kits - s3 airspray guns
Aircap kits for S3 G HPA spray guns
<20
<20
<20
20-30
Tip size
0.032 in
(0.8 mm)
0.039 in
(1.0 mm)
0.047 in
(1.2 mm)
0.039 in
(1.0 mm)
Fan width at
8 inches / Aircap kit*
(20 cm (cm))
5.9 in
08 AM
(15 cm)
6.7 in
10 AM
(17 cm)
7.5 in
12 AM
(19 cm)
5.2 in
10 PGL
(13 cm)
Air
consumption
(m3/h)
12,9
12,9
12,9
4
Fluid output
Part number
kit
Aircap
Needle
Nozzle
2.9 oz/mn
(86 cc/mn)
4.8 oz/mn
(142 cc/mn)
6.1 oz/mn
(180 cc/mn)
5.0 oz/mn
(148 cc/mn)
031-150-008
132-630-400
033-150-100
134-630-400
031-150-009
132-630-400
033-150-500
134-630-100
031-150-010
132-630-400
033-150-200
134-630-200
031-150-007
132-640-100
033-150-300
134-640-100
Aircap kits for S3 A HPA spray guns
Aircap kits
Aircap kits for S3G HPA spray guns
Max Fluid
viscosity
in CA 4
Aircap kits for S3 A HPA airspray guns
Max Fluid
viscosity
in CA 4
<20
<20
<20
20-40
Tip size
0.032 in
(0.8 mm)
0.039 in
(1.0 mm)
0.047 in
(1.2 mm)
0.039 in
(1.0 mm)
Fan width at
8 inches /
Aircap kit*
(20 cm (cm))
5.9 in
08 AM
(15 cm)
6.7 in
10 AM
(17 cm)
7.5 in
12 AM
(19 cm)
7.9 in
15 AY
(20 cm)
Air
consumption
Fluid output
Part number
kit
7.6 cfm
(12.9 m3/h)
7.6 cfm
(12.9 m3/h)
7.6 cfm
(12.9 m3/h)
8.3 cfm
(14.1 m3/h)
2.9 oz/mn
(86 cc/mn)
4.8 oz/mn
(142 cc/mn)
6.1 oz/mn
(180 cc/mn)
6.1 oz/mn
(180 cc/mn)
031-150-008
132-630-400 033-150-100 134-630-400
031-150-009
132-630-400 033-150-500 134-630-100
031-150-010
132-630-400 033-150-200 134-630-200
031-150-011
132-630-200 033-150-400 134-630-300
Aircap
Needle
Nozzle
Aircap kits for S3 P HPA spray guns
Aircap kitS FOR S3P HPA SPRAY GUNS
Max Fluid
viscosity
in CA 4
14-20
20-30
30-40
20-30
Tip size
0.032 in
(0.8 mm)
0.039 in
(1.0 mm)
0.047 in
(1.2 mm)
0.039 in
(1.0 mm)
Fan width at
8 inches / Aircap kit*
(20 cm (cm))
9.1 in
08 PX
(23 cm)
9.3 in
10 PX
(23.5 cm)
9.8 in
12 PX
(25 cm)
5.1 in
10 PGL
(13 cm)
Air
consumption
Fluid output
Part number
kit
Aircap
Needle
Nozzle
5.9 cfm
(10 m3/h)
5.9 cfm
(10 m3/h)
5.9 cfm
(10 m3/h)
2.4 cfm
(4 m3/h)
10.4 oz/mn
(307 cc/mn)
17.1 oz/mn
(506 cc/mn)
24.7 oz/mn
(731 cc/mn)
5 oz/mn
(148 cc/mn)
031-150-001
132-631-100
033-150-100
134-630-400
031-150-002
132-631-100
033-150-500
134-630-100
031-150-003
132-631-100
033-150-200
134-630-200
031-150-007
132.640.100
033-150-300
134-640-100
33
Aircap kits
Special treated nozzles for M22 P
SPECIAL treated NOZZLES FOR M22 P
Description
207 T
209 T
212 T
215 T
218 T
223 T
227 T
233 T
240 T
Description
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Treated nozzle
Needle
033-140-100
033-140-100
033-140-100
033-140-200
033-140-200
033-140-300
033-140-300
033-140-400
033-140-400
Nozzle
134-135-100
134-135-200
134-135-300
134-135-600
134-135-700
134-136-100
134-136-200
134-136-300
134-136-400
Needle with polyacetal end for M22 spray guns
Needle with polyacetal end for M22 G HTi and HPA (OPTION)
Description
Needle with polyacetal end
Nozzle
0.02 in
/
0.03 in
/
0.04 in
/
0.051 in
/
0.055
/
0.059 in
/
0.07 in
/
size
(0.7 mm)
(0.9 mm)
(1.2 mm)
(1.3 mm)
(1.4 mm)
(1.5 mm)
(1.8 mm)
Part number
033-130-400
033-130-500
Needle with polyacetal end for M22P HTi and HPA (OPTION)
Description
Needle with polyacetal end
i
Nozzle
0.02 in
/
0.03 in
/
0.04 in
/
0.051 in
/
0.055
/
0.059 in
/
0.07 in
/
0.091 in
/
0.106 in
/
0.129 in
/
0.157 in
/
size
(0.7 mm)
(0.9 mm)
(1.2 mm)
(1.3 mm)
(1.4 mm)
(1.5 mm)
(1.8 mm)
(2.3 mm)
(2.7 mm)
(3.3 mm)
(4.0 mm)
Part number
033-140-500
033-140-600
033-140-300
033-140-400
KREMLIN’s
advice
We have designed guns for virtually all types of application. We have
a large selection of aircaps (aircaps, needle and nozzle) for all types of
work. Make sure you use the aircaps with the guns for which they were
designed. For example, a pressure aircap kit will not work with a suction
or gravity gun. By the same token, low pressure aircaps will no longer
work at low pressure if used with a conventional spray gun.
34
02.75 Pump
Features
Intensive™ pumps
The 02.75 piston pump is designed for use with a single or multiple gun system spraying medium viscosity coatings. It can also be used on a heated circulation system.
Benefits
Compact design
Rugged - High sealing capacity with
single lip seal
Stainless steel fluid section
Easily integrated into a finish workshop
Compatible with a wide range of materials
Compatible with water-based materials
SPECIFICATIONS
Pressure ratio
Fluid volume per cycle (cm3)
Number of cycles per 33.8 fl.oz (1 liter) of products
Air consumption at 30 cycles/mn at 60 psi (4 bar)
Fluid Output at 30 cycles/mn (l/mn)
Free flow rate (L/mn)
Sound level (dBA)
Sealing Packings
Upper sealing
1.8 : 1
85
12
1.2 cfm / (2.1 m3/h)
2.6
5.1
90 psi / (6 bar)
150 psi / (10 bar)
140 °F / (60 °C)
81
GT cartridge with polyethylene
packing
Acetal resin seal
11 lbs. / (5 kg)
Aluminum, stainless steel
16.1 in / (41 cm)
11 in / (28 cm)
6.7 in / (17 cm)
Lower sealing
Weight - bare pump
Wetted parts
Height
Width - 2 regulators
Depth
FITTINGS
Fitting
Air inlet (valve)
Air outlet (atomization air)
Fluid Inlet
Fluid Outlet
F 3/8" BSP
M 1/4" NPS
M 18x125
M 3/8" NPS
CONFIGURATION OF THE 02.75 PUMP
Set-up
Bare, stainless
steel
Wall-mounted,
stainless steel
with 2 air
regulators and 1
fluid regulator
Pump air
regulator
Atomization air
regulator
Fluid pressure
regulator
Suction
rod
Drain
rod
-
-
-
-
-
Yes
Yes
Yes
Yes
Yes
Pump outlet
filter
Part number
144-940-000
-
151-761-400
SEAL KITS
Description
Seal kit for 75 fluid section
Repair kit for 75 fluid section
Seal kit for 340-2 air motor
Part number
144-941-490
144-941-495
144-850-150
35
Diaphragm pumps
PMP 150 pump
The PMP-150 diaphragm pump is designed for fluid applications requiring a 1:1 pressure ratio and can be used
on some adhesive applications and harsh or high coatings.
Features
Benefits
Simple design
Double material diaphragm constructed
from PTFE and nitrile
Easy operation and maintenance
Compatible with most solvent or
water-based products.
Quick motor inversion
Small footprint
Compact design
SPECIFICATIONS
Pressure ratio
Air consumption at 30 cycles/mn at 60psi (4 bar)
Sound level (dBA)
Weight - bare pump
Wetted parts
Height
Width
Depth
1:1
100
10
0.65 cfm / (1.1 m3/h)
3
19
90 psi / (6 bar)
90 psi / (6 bar)
122 °F / (50 °C)
<70
11.2 lbs. / (5 kg)
PTFE, Polypropylene, Stainless steel
9.4 in / (24 cm)
14.1 in / (36 cm)
10.2 in / (26 cm)
FITTINGS
Fitting
Air inlet (valve)
Fluid Inlet
Fluid Outlet
F 3/8" BSP
M 1/4” NPS
M 18 x 125
F 3/8" NPS
CONFIGURATION OF THE PMP 150 PUMP
Set-up
Bare pump
Wall-mounted
Wall-mounted
with stainless
steel circulation
Pump air
regulator
Yes
Atomization air
regulator
Yes
Fluid pressure
regulator
Yes
Suction
rod
Yes
Drain
rod
-
Pump output
filter
-
144-931-000
151-753-000
Yes
Yes
Yes
Yes
-
-
151-757-000
Part number
Options
Description
Complete wall mounting bracket
Motor air supply kit
Stainless steel circulation kit
(to be included: wall bracket ref: 056-100-199)
Fluid pressure air regulator
Can be fitted on
Bare pump
Bare pump
Part number
051-751-030
151-753-050
Wall-mounted
151-757-010
Wall-mounted
151-753-010
SEAL KITS
Description
PMP motor seal kit
Fluid section seal kit (PTFE)
36
Part number
144-931-091
144-931-092
PMP 150 transfer pump
The PMP-150 transfer pump is designed for fluid transfer applications.
Benefits
Diaphragm pumps
Features
Compatible with most solvent or
water-based products.
Easy set-up in the workshop
Simple design
Compact design
SPECIFICATIONS
Pressure ratio
Air consumption at 30 cycles/mn at 60psi (4 bar)
Sound level (dBA)
Weight - bare pump
Wetted parts
Height
Width
Depth
1:1
100
10
0.65 cfm / (1.1 m3/h)
3
19
90 psi / (6 bar)
90 psi / (6 bar)
122 °F / (50 °C)
<70
13 lbs. / (6 kg)
8.6 in / (22 cm)
7.8 in / (20 cm)
5.9 in / (15 cm)
FITTINGS
Fitting
Air inlet (valve)
Fluid Inlet
Fluid Outlet
F 3/8" BSP
F 3/4" NPS
F 3/8" BSP
CONFIGURATION OF THE PMP 150 transfer PUMP
Set-up
Bare Transfer PMP
150 pump bung
mounted unit
Pump air
regulator
Atomization air
regulator
Fluid pressure
regulator
Yes
-
-
Suction
rod
Yes
2” bung
fitting
Drain
rod
Pump output
filter
Part number
-
-
668-751-059
SEAL KITS
Description
PMP motor seal kit
Part number
144-931-091
144-931-092
37
Diaphragm pumps
PMP 150 pail mount
Ideal for finishing. Includes circulation flow control, Kremlin 2 in1 fluid regulator and air controls. The PMP
150 is specially designed for paint and coating applications providing excellent flow and smooth operation the best possible package for airspray and HVLP applications.
Features
Benefits
Simple design
Rugged design
Compatible with most water-based products
Long lasting performance
SPECIFICATIONS
Compression ratio
Fluid volume per cycle
Number of cycles per gallon
Air consumption at 30 cycles/mn
Fluid output at 30 cycles/mn
Free flow rate
Maximum pump air pressure
Sound level (dBA)
Wetted parts
Weight - bare pump
Height - wall mounted pump
Width - wall mounted pump
Depth - wall mounted pump
Pail mount, SST Balls/Seats, PTFE Diaphragms
Pail mount, SST Balls/Seats, PTFE Diaphragms,
Agitators
Pail mount, SST Balls/Seats, PTFE Diaphragms,
Agitator, Recirculation kit
1:1
(100 cm3)
10
0.65 cfm / (1.1 m3/h)
0.8 gal / (3 liters)
4 gal/min
/
(19 liters)
90 psi / (6 bar)
90 psi / (6 bar)
122 °F / (50 °C)
<70
11 lbs.
/
(5kg)
9.5”
/
(24mm)
14.2”
/
(36mm)
10.2”
/
(26mm)
P/N 668-751-020
P/N 668-751-021
3.4 oz
P/N 668-751-030
FITTINGS
Air inlet (valve)
Fluid Inlet
Fluid Outlet
F 3/8" BSP
M 1/4” NPS
M 18 x 125
F 3/8" NPS
CONFIGURATION OF THE PMP 150 pail PUMP
Set-up
Pail
Pail
Pail
Pail
38
mount
mount
mount
mount
Pump air
regulator
Yes
Yes
Yes
Yes
Atomization air
regulator
Yes
Yes
Yes
Fluid
regulator
Yes
Yes
Yes
Agitator
Circulation
Part number
Yes
Yes
Yes
Yes
668-751-025
668-751-020
668-751-021
668-751-030
aodd pumps
Diaphragm pumps
1/2” Metallic ball valve air powered
Double diaphragm pump
SPECIFICATIONS
Intake discharge pipe size
1/2” NPT or 1/2” BSP (internal)
1” NPT or 1” BSP (external)
0 to 15 gallons per minute
(0 to 56 liters per minute)
no-lube, no stall design
Up to .125” (3mm)
125 psi or 289 ft of water
(8.6 kg/cm2 or 86 meters)
.026 gal
/
.098 liter)
Capacity
Air valve
Solids handling
Heads up to
Displacement
Description
Part number
Aluminum
Stainless steel
668-170-006
668-170-008
1” Metallic ball valve air powered
Double diaphragm pump
SPECIFICATIONS
Intake discharge pipe size
1” NPT (internal)
1” BSPT (external)
0 to 45 gallons per minute
(0 to 170 liters per minute)
no-lube, no stall design
Up to .25” (6mm)
125 psi or 289 ft of water
(8.6 kg/cm2 or 86 meters)
.11 gal
/
.42 liter)
Capacity
Air valve
Solids handling
Heads up to
Displacement
Description
Part number
Aluminum
Stainless steel
Stainless steel
Pump models
668-170-010
668-170-012
668-170-013
A
B
C
Height
Width
Depth
inches
668-170-006
668-170-008
668-170-010
668-170-012
668-170-013
11 1/2”
(292)
10 3/8”
(264)
12 27/32”
(323)
12 27/32”
(323)
12 27/32”
(323)
10 1/4”
(260)
/
7 1/16”
(179)
7 1/16”
(179)
10 3/8”
(264)
10 3/8”
(264)
10 3/8”
(264)
D
E
Bottom of base to
center line
(mm)
1 5/16”
(33)
1 5/16”
(33)
1 3/32”
(28)
1 7/32”
(31)
1 7/32”
(31)
11 1/2”
(292)
9 23/32”
(247)
11 27/32”
(301)
11 31/32
(304)
11 31/32
(304)
Connection
style
1” MNPT
1” MNPT
1” NPT
1” NPT
1” NPT
per Max flow
Pipe size Displacement
stroke
per/mn
inches
(mm)
.5”
(12)
.5”
(12)
1
(25)
1
(25)
1
(25)
gallon
(liter)
.026
(.098)
.026
(.098)
.11
(.42)
.11
(.42)
.11
(.42)
gallon
(liter)
15
(57)
15
(57)
45
(170)
45
(170)
45
(170)
Max
solids
handling
inches
(mm)
.125
(3)
.125
(3)
.25
(6)
.25
(6)
.25
(6)
39
PMP 150 E Pump
Diaphragm pumps
The PMP-150E diaphragm pump is a packing free pump designed with special balls and seats to pump abrasive
water-based coatings such as porcelain enamel.
Features
Benefits
Simple and rugged design
Compact design
Charged polypropylene diaphragm and
polyurethane balls
Compatible with a wide range of materials
Long lasting performance
Compatible with water-based and enamels
SPECIFICATIONS
Pressure ratio
Number of cycles per liter of products
Air consumption at 30 cycles/mn at 60 psi (4 bar)
Fluid Output at 30 cycles/mn
Free flow rate
Sound level (dBA)
Weight - bare pump
Diaphragm material
Wetted parts
Height
Width
Depth
1:1
100
10
0.65 cfm / (1.1 m3/h)
0.8 gal / (3 liters)
4 gal/min
/
(19 liters)
90 psi / (6 bar)
90 psi / (6 bar)
122 °F / (50 °C)
<70
11 lbs. / (5 kg)
Polyurethane
Polypropylene, PTFE, polyurethane
8.6 in / (22 cm)
7.8 in / (20 cm)
5.9 in / (15 cm)
FITTINGS
Fitting
Air Inlet
Fluid Inlet
Fluid Outlet
F 3/8" BSP
F 3/8" BSP
F 3/8" BSP
SEAL PACKS
Description
PMP motor seal kit
Part number
144-931-091
144-931-092
CONFIGURATION OF THE PMP 150E PUMP
Set-up
Bare
Pump air
regulator
-
Atomization air
regulator
-
Fluid pressure
regulator
-
Suction
rod
-
Drain
rod
-
Pump output
filter
Part number
144-932-000
OPTIONS
Description
Motor air supply kit
Complete wall mounting bracket
40
Part number
151-753-050
051-751-030
pressure pot & cups
The 2 quart pressure cup is great for small batch jobs and fast color changes while the 2 gallon (Non-ASME)
pressure pot is designed to feed most coatings in pressure feed applications.
Features
Benefits
Solvent resistant glass on gauges
Aluminum cup construction (2 quart cup)
Stainless steel fluid passages (2 gallon pot)
Anti-stick PTFE coating (2 gallon pot)
Easy to clean and view without distortion
Lightweight and easy to handle
Compatible with most coatings
Easy to clean and maintain
SPECIFICATIONS
Description
2 quart cup
Capacity
Material
Diameter
Height (cup/pot only)
Number of clamps
Weight
Number of handles
Removable aluminum liner
Maximum inlet pressure
Maximum temperature
Air regulator (s)
Number of fluid outputs
Agitator
2.5 quarts
/
2 gallon pot
2 gallon pot with
agitator
/
(11 L)
(2.75 L)
2.5 gallons
Forged aluminum
5 1/8”
/
(13 cm)
11 3/8”
/
(29cm)
8 3/4”
/
(22.2 cm)
10 1/2”
/
(26.7 cm)
screw on lid
3
2.5 lbs.
32 lbs.
36.5 lbs.
(1.3 kg)
(14.5 kg)
(16.5 kg)
1
No
2.5 gallons
/
(11 L)
50 psi
/
(3.5 bar)
80 psi
/
(6 bar)
122°F / (50°C)
1
1 or 2
1 upper
No
No
Yes
Pressure pots & cups
2 Gallon pressure pots
FITTINGS
Hose connection
Fitting
Air inlet
Fluid outlet
2 quart cup
1/4NPSM
3/8NPSM
2 gallon pot
1/4NPSM
3/8NPSM
2 gallon pot with agitator
3/8NPTM
3/8NPSM
CONFIGURATION OF 2 gallon pressure pot agitators
Description
2
2
2
2
gallon
gallon
gallon
gallon
pressure
pressure
pressure
pressure
Pot regulator
pot
pot c/w single regulator
pot c/w agitator
pot c/w single regulator, regulator
Yes
Yes
Yes
Yes
Atomization
regulator
Yes
Yes
-
Regulator
Part number
Yes
Yes
668-222-145
668-222-140
668-222-150
668-222-155
2 Quart pressure cup
2 quart pressure cup
Description
2 quart pressure cup c/w gauge
Part number
668-222-000
maintenance parts
Description
Lid gasket for 2 quart cup
Lid gasket for 2 gallon pot
Part number
668-222-030
668-222-031
41
Airspray packages
airspray packages
2 quart pressure cup packages
Description
2 quart cup
Number of
regulators
Suction rod size
1
N/A
Hose length
Agitator
Aircap kit*
5 ft
(1.5 m)
No
12 NN 3
15 NN 3
12 EP 3
12 E 3
Gun model
M22 HTiP - LVLP
M22 HTiP - HVLP
Hose length
Agitator
Aircap kit*
Gun model
Part number
12 NN 3
M21/2P
15 NN 3
M22 HPAP
12LP 3
M22 HTiP - LVLP
12 E 3
M22 HTiP - HVLP
668-222-011
668-222-012
668-222-022
668-222-013
668-222-026
668-222-014
668-222-024
Aircap kit*
Gun model
Part number
12 E 3
M21/2P
12 E 3
M22 HTIP
- LVLP
15 N3
M21/2P
668-751-058
668-751-022
668-751-023
668-751-000
668-751-001
668-751-004
Agitator
Aircap kit*
Gun model
Part number
No
12 E 3
12 E 3
M22 HTIP
- LVLP
668-763-200
668-763-201
M21/2P
Part number
668-222-001
668-222-002
668-222-003
668-222-004
2 gallon pressure pot packages
Description
Number of
regulators
Suction rod size
No
2 gallon pot
2
N/A
25 ft
(7.5 m)
Yes
No
Yes
No
Yes
PMP-150 diaphragm pump packages
Description
Bung
Pail-mounted
Pail-mounted
Wall-mounted
Wall-mounted
Wall-mounted
Number of
regulators
Suction rod size
Hose length
No
N/A
3
5 gallon
55 gallon
5 gallon
Agitator
25 ft
(7.5 m)
Yes
No
02.75 piston pump pump packages
Description
42
Wall-mounted
Wall-mounted
Number of
regulators
3
Suction rod size
Hose length
5 gallon
55 gallon
25 ft
(7.5 m)
Gravity cups
The white cup is for water or solvent based paints ; the grey cup is for Polyurethanes
and pre-catalyzed paints
GRAVITY CUPS FOR M22 G, J4II, M21 G AND J5 G
Description
White cup (solvent and water-based
paints)
Grey cup (PU and pre-catalyzed
paints)
Material
Polyacetal
HDPE
Capacity
8.5 fl. oz.
(0.25 L)
20.2 fl. oz.
(0.6 L)
20.2 fl. oz.
(0.6 L)
Fitting
1/4" BSP
Part number
139-280-200
139-270-200
1/4" BSP
139-270-250
Fitting
Part number
1/4" BSP
139-280-250
GRAVITY CUPS FOR S3 G
Description
Grey cup (PU- and pre-catalysed
paints)
Material
HDPE
Capacity
8.5 fl. oz.
(0.25 L)
Accessories
accessories
SEAL PACKS AND SCREENS
Description
Pack of non-drip PLUGs for 8.25 fl oz. (0.25 liter) and
20.2 fl oz.(0.6 liter) cups
Pack of screens for 8.25 fl oz. (0.25 liter) and
20.2 fl oz.(0.6 liter) cups (200 µm)
Quantity
Part number
5
139-270-210
5
139-270-220
PPS 650 S3 and M22 series Gravity & Suction
guns lid, liner cup & collar
lid, liner, cup & collar
Description
Includes 50 lids/liners, 2 cups & collars & adaptor
M22 suction
S3 suction
M22/ S3 gravity
Part number
668-000-300
668-000-301
668-000-302
shop package - pps 650 starter kit
Description
Includes 50 lids/liners
Dispenser for liners
Dispenser for lids
Part number
668-000-298
refills
Description
PPS 650 ml lids and liners - Qty 50
Part number
668-000-241
accessories
Description
Wash bottle
Film 650 - 10 pack
Part number
668-000-297
668-000-269
43
accessories
Accessories
Suction cup with non-drip system
Turn quick opening SM6 aluminum twist cup
SUCTION CUP FOR M22 A, M21 A
Description
Complete SM6 standard suction
cup
Fitted cover (with tube)
Material
Fitting
F3/8'' NPS
Aluminium
F 3/8'' NPS
Cup only
-
Capacity
33.8 fl.oz.
(1 L)
33.8 fl.oz.
(1 L)
Part number
138-360-000
138-360-200
138-350-100
SUCTION CUP FOR S3 A
Description
Suction cup (grey)
Fitting
Material
F 1/4" NPS
HDPE
Capacity
8.5 fl.oz.
(0.25 L)
Part number
138.390.000
SEAL PACKS FOR SM6
Description
Pack of cup seals
Pack of filters
Pack of non-drip plugs
Pack of filters for SM5 (old model)
Quantity
10
4
5
4
Part number
138-010-900
138-310-300
138-350-901
138-010-800
SEAL PACKS FOR S3 A
Description
Pack of 5 non-drip plugs for 8.5 fl.oz.
(0.25 L) and 20.3 fl.oz (0.6 L) cups
Pack of filters
Quantity
Part number
5
139-270-210
4
138-310-300
SEAL PACKS
Description
Pack of cup seals
Pack of filters
Quantity
10
4
Part number
138-010-900
138-310-300
Gravity pressure cup for M22 GSP
airspray guns
Part number
Description
Pressure cup
44
Material
HDPE (grey)
Capacity
20.3 fl.oz)
(0.6 L)
Fitting
Part number
1/4" BSP
139-270-260
accessories
Designed for painting the inside of tubes (360° circular fan) or the inside of cavities (lateral fan)
or the bottom of cavities (cone fan)
EXTENSIONS FOR PRESSURE-FED M22 SPRAY GUNS
Fan type
Cone
Cone
Lateral
Lateral
Lateral
Lateral
Internal diameter
0.31”
(8 mm)
5.9”
5.9”
9.8”
9.8”
15.7”
15.7”
Length
/ (150 mm)
/ (150 mm)
/ (250 mm)
/ (250 mm)
/ (400 mm)
/ (400 mm)
Nozzle type
12
18
12
18
12
18
Part number
075-900-213
075-900-224
075-900-111
075-900-122
075-900-311
075-900-322
Accessories
Extensions for pressure feed guns
Stainless steel Y- fitting for M22 and M21 spray guns
Gun fitting : F 3/8" NPS
Hose fiiting : 2 x M 1/4" NPS supplied and fitted.
Part numberS
Description
Stainless steel Y-fitting - for airspray guns
Part number
668-668-942
Push-pull for M22 and M21
Quick change system between flat and round fans - for airspray guns.
Part numberS
Description
Push-pull for M22 spray guns
Part number
129-140-050
Fluid inlet filter
fluid inlet filter
Description
Fluid inlet filter with Nº 6 screen for S3 spray gun
Fluid inlet filter with Nº 6 screen for M22 spray gun
Fittings on gun
M 1/4” NPS
F 3/8” NPS
Hose thread
M 1/4” BSP
M 3/8” NPS
Part number
129-020-060
129-140-030
seal packs for fluid inlet filter
Description
Pack of Nº 6 screens
Pack of seals
Quantity
10
10
Part number
151-399-902
149-949-901
45
accessories
Test aircap with gauges for HVLP spray gun compliance
Accessories
TEST aircap with GAUGES for hvlp spray gun compliance
Fits Gun Series
M22
M22
Description
E3 K HVLP aircap with test gauges
E5 K HVLP aircap with test gauges
Part number
668-668-596
668-668-597
Wall or table mounting kit for gravity feed guns
mounting kit
Description
Table support for gravity-fed guns
Wall support for gravity-fed guns
Part number
049-221-800
049-221-900
Techni lub - PTFE grease
techni lub - PTFE Grease
Description
0.33 oz tube of Techni lub
15.5 oz can of Techni lub
Part number
560-440-101
560-440-001
Gun handle inlet pressure gauge for
HVLP compliance testing
gun handle inlet pressure gauge
Description
0-30 psi gauge assembly for testing gun inlet pressure ( M/F 1/4” NPS)
Part number
150-070-560
Siphon hose inlet manifolds
siphon hose inlet manifolds
Description
A Two-way suction manifold for PMP-150 pump (siphon hoses not included)
B Two-way suction manifold for 02.75 pump (siphon hoses not included)
C Two-way S/S suction manifold for 02.75 pump (siphon hoses not included)
D Three-way suction manifold for 02.75 pump (siphon hoses not included)
E Three-way S/S suction manifold for 02.75 pump (siphon hoses not included)
A.
D.
46
Part number
669-669-040
669-669-024
668-668-449
669-669-025
668-668-450
accessories
siphon hose inlet manifolds
• Regulated outlet: F 1/4” G
• Air inlet fitting: M 3/8” NPS
• Maximum outlet pressure of 58 psi ( 4 bar)
• Maximum inlet pressure of 580 psi (40 bar)
• Maximum delivery is 0.4 gpm (1.5 lpm)
Description
Low flow fluid pressure regulator, bare
Low flow fluid pressure regulator, with gauge
High flow fluid pressure regulator, bare
High flow fluid pressure regulator, with gauge
Part number
155-610-200
155-610-209
155-610-250
155-610-259
2 in 1 pressure regulator - stainless steel
• Regulated outlet: F 1/4˝ G
• Air inlet fitting: F 1/4˝ G
• Fluid inlet: 3 male fittings provided
(M 18x125, M 3/8˝ NPS,M 3/8˝ BSP)
• Air regulator and fluid regulator in one
Part number
Description
Low flow fluid pressure regulator, bare
155-610-060
Accessories
Manual control fluid pressure regulator
Back pressure regulator - stainless steel
• Maximum inlet pressure: 87 psi (6 bar)
• Fluid outlet: M 1/4˝ G with adapter for M 3/8˝ NPS
• Regulated back pressure: 0 - 87 psi ( 0 - 6 bar)
Part number
Description
Back pressure regulator, bare
Back pressure regulator, with gauge
155-610-100
668-610-500
Options
Wall support
Pressure gauge: Stainless Steel (male/female 1/4˝ neck)
Stainless Steel tube
Stainless Steel coupling
Pressure gauge
016-200-010
050-470-101
050-081-701
050-470-301
910-011-402
Superfilter
Superfilter
• Fluid inlet and outlet connections F 3/8” NPT
Description
Stainless steel fluid filter for 02.75 pump (#6 screen included as std)
#2 (200 mesh) screen for Superfilter
Part number
155-580-300
000-161-102
000-161-104
000-161-106
000-161-108
000-161-112
Siphon hose assembly - stainless steel
siphon hose assembly - stainless steel
Description
5 gallon siphon assembly for M18 x 125 fitting
55 gallon siphon hose assembly for M18 x 125 fitting
Part number
049-596-010
668-668-201
47
Accessories
accessories
1/4” air hose assemblies, conductive
5/16” air hose assemblies, conductive (for HVLP applications)
1/4" air hose assemblies, conductive
Description
5 ft. / (1.5 m) long air hose with 1/4˝ F NPS fittings
10 ft. / (3 m) long air hose with 1/4˝ F NPS fittings
16 ft / (5 m) long air hose with 1/4˝ F NPS fittings
25 ft / (7.5m) long air hose with 1/4˝ F NPS fittings
50 ft. / (15m) long air hose with 1/4˝ F NPS fittings
Part number
668-385-105
668-385-110
050-382-109
050-382-114
668-385-128
050-382-110
050-382-116
5/16" air hose assemblies, conductive ( for HVLP applications)
Description
16 ft / (5 m) long air hose with 1/4˝ F NPS fittings
25 ft / (7.5m) long air hose with 1/4˝ F NPS fittings
50 ft. / (15m) long air hose with 1/4˝ F NPS fittings
Part number
668-395-105
668-395-110
050-389-101
050-389-103
050-389-102
668-395-150
1/4” low pressure fluid hose assemblies
1/4” low pressure FLUID HOSE assemblies
Description
5 ft. / (1.5 m) long fluid hose with 3/8” F NPS fittings
10 ft. / (3 m) long fluid hose with 3/8” F NPS fittings
16 ft / (5 m) long fluid hose with 3/8”F NPS fittings
25 ft / (7.5m) long fluid hose with 3/8” F NPS fittings
32 ft. / (10 m) long fluid hose with 3/8” F NPS fittings
50 ft / (15m) long fluid hose with 3/8” F NPS fittings
Part number
668-362-105
668-362-110
668-362-116
668-362-125
668-362-132
668-362-150
Protective hose sleeve
Part numberS
Description
16 ft
/
(5 m) protective hose sleeve
25 ft
/
(7.5 m) protective hose sleeve
32 ft
/
50 ft
/
100 ft /
1000 ft / (300 m) protective hose sleeve
Part number
669-990-101
669-990-102
669-990-103
669-990-106
669-990-104
669-990-105
Protective gun cover for all manual guns
protective gun covers
Description
Protective gun covers - pack of 4
48
Part number
668-668-602
accessories
5 AND 55 GALLON DIRECT DRIVE AGITATORS
Description
5 gallon S/S agitator with cover and nylon blade
55 gallon S/S agitator with cover and nylon blades
55 gallon agitator and elevator
M3R-55E Gear reducer agitator and elevator
Part number
668-668-806
668-668-320
668-900-125
668-900-201
Pump carts
Pump carts
Description
Single post cart (recommended for PMP-150 and 02.75 pumps)
Two arm cart C/W wall plate
Two arm cart W/O wall plate
Accessories
5 and 55 gallon direct drive agitators
Part number
051-730-110
668-221-000
051-221-000
Paper filter
Disposable filter paper, used to strain the paint before pouring it into the cups.
PACK OF FILTERS
Description
Paper paint filters
Quantity
10
Part number
151-399-903
Wet film thickness gauge
wet film thickness gauge
Description
Wet film build thickness test gauge
Part number
000-790-020
Viscosity cup - AFNOR4
viscosity cup
Description
Viscosity cup number 4 (CA4)
Part number
049-221-400
49
Accessories
accessories
Protective cream 6.7 oz
(200ml)
Smooth white paste for the hands and face.
Ensures full protection for half a day and is easily removed with water.
•
•
Neutral pH with lavender scent
Free from silicone, lanoline or coloring
Part number
Description
Quantity
36
6
1
Protective cream tube
Part number
143-039-912
143-039-913
043-039-912
Protective overalls
Protects the operator. Comfortable to wear, giving protection for dust or plush.
•
Made in non-woven fabric, they come with elastic wrists and wide trouser legs to protect footwear
Part numbers
Description
Overalls Size
Size
S
M
L
XL
XXL
Quantity
5
Part number
564-504-001
564-504-002
564-504-003
564-504-004
564-504-005
Protective hood
Protects the head and hair
•
Non-woven, light and lets the skin breathe
Part numbers
Description
Protective hood
50
Quantity
5
Part number
043-250-001
accessories
Accessories
BOOTHBOX 2™
The BOOTHBOX 2™ (patent pending) is a magnetic, double compartment, enclosed
cabinet and spray gun holding device designed for use within the painting area. Increase
organization and efficiency when painting with your needed materials close at hand, and
protected from over-spray environments. The BOOTHBOX 2™ provides enough space to
store necessary items, but small enough to avoid accumulation of clutter.
Cabinet Body: 20 gauge steel
Spray Gun Hangers: 16 gauge steel
Powder Coating Finish
2 Separate Compartments - (Upper & Lower)
Cabinet Dimensions:
15” width, 14” height, 6.25” depth
Shipping weights: Magnetic model - 14 lbs.
Bolt-on model - 11 lbs.
Part number
Description
BOOTHBOX 2™
BOTTHBOX 2™ C/W mounting hooks
Part number
668-000-126
668-000-128
BOOTHBOX MINI™
The BOOTHBOX MINI™ (patent pending) is a magnetic, single compartment, enclosed
cabinet and spray gun holding device designed for use within the painting area. Increase
organization and efficiency when painting with your needed materials close at hand, and
protected from over-spray environments. The BOOTHBOX MINI™ provides enough space
to store necessary items, but small enough to avoid accumulation of clutter.
Cabinet Body: 20 gauge steel
Spray Gun Hangers: 16 gauge steel
Powder Coating Finish
Single Compartment Cabinet
Cabinet Dimensions: 14” width, 7.25” height, 6” depth
Shipping weights: Magnetic model - 9 lbs.
Bolt-on model - 7 lbs.
Part number
Description
BOOTHBOX MINI™ magnetic
BOTTHBOX MINI™ C/W fasteners
MAGNAHOOK™ magnetic
Hose & gun hanger magnetic
Hose & gun hanger, c/w fasteners
Part number
668-000-125
668-000-129
668-000-127
668-000-130
668-000-131
Magna Hook™
Hose & Gunhanger™
51
quick payback solutions
Plastic Feeder Market
Tier 1 & Heavy Truck Market
Conduit Manufacturing
Market
Cabinet and Machine
Tool Market
Product Assembly Market
52
Construction Equipment Market
Kitchen Cabinet Market
Kitchen Cabinet Market
Vending Machine Market
Aerospace Market
Military Vehicles Market
Agricultural Market
Drum Painting Market
3K CARC Military Vehicles Market
Service Capabilities
Appliance Market
Robot Mounted Applicator
From Low Speed to
High Speed Turbine
market development literature
Advanced Technology
Group
Steel Door Market
Propane Tank Market
Wind Energy Market
Color Changer Family
Chemical Agent
Resistant Coating
Horizontal Line
Bell Finishing
Linear Flat-Line
6X-CTEVertical Finishing System
Cyclomix™ Recovery
Series
53
EXEL Industries...
An International Presence
Canada
EXEL North America, consisting of our American, Canadian and Mexican subsidiaries, is a wholly owned subsidiary of
EXEL Industries. They bring four finishing, fluid handling and dispensing brands under one company banner.
The four brands offer the widest range of controlled application equipment for finishing and dispensing in the world.
Our Vision
To remain the global leader in high value added custom and standard solutions for controlled applications of
powders and fluids, thick or thin, in the industrial and automotive markets.
Our Values
We are a team of people with integrity that have a mission-to-serve with a sense of urgency in delivering the
right solution and service through our network of Solution and Service Centers.
Our Mission
Finishing • Fluid Handling • Dispensing
54
EXELMaking Manufacturers More Competitive™
A north american Presence
Precision Finishing, Fluid Handling and Dispensing Brands
Non-electrostatic guns, pumps and
accessories for thin fluids
Dispense heads, pumps
and accessories for thick fluids
Electrostatic application equipment
for liquid and powder
Full Range of Equipment
Manual
Airspray
Manual
Airmix®
Manual
Liquid
Electrostatic
Automatic
Liquid
Electrostatic
Automatic
Powder
Fluid Delivery
Pumps &
Accessories
Manual
Powder
Extrusion (RAM)
Pumps
& Accessories
Automatic
Non-Electrostatic
Plural Component
Systems &
Accessories
Manufacturing Markets Served
Wood
Plymouth, Michigan
Scarborough, Ontario
Monterrey, Mexico
Industrial
Plymouth, Michigan
Monterrey, Mexico
Feeder
Plants
Plymouth, Michigan
Monterrey, Mexico
Automotive
Plymouth, Michigan
Monterrey, Mexico
EXEL R&D, Testing, Training, Distribution and Manufacturing Locations
Over 100 North American
Solution and Service Centers for
Customer Sales and Service
55
EXEL North America, Inc.
North American Headquarters
45001 5 Mile Road
Plymouth, MI 48170
Toll Free: (800) 573-5554
Phone: (734) 979-0100
Fax: (734) 927-0064
General Catalog
Manual Powder
EXEL North America, Inc.
EXEL-NA, S.A. de C.V.
Canadian Branch
931 Progress Ave., Unit 7
Scarborough, Ontario M1G 3V5
Toll Free: (800) 450-0655
Phone: (416) 431-5017
Fax: (416) 431-9171
Manual Airspray
Automatic Spray
Mexico Branch
Bernardo Garza Treviño # 1715
Col. Del Maestro,
Monterrey, N.L. Mexico CP 64180
Phone: (81) 1257-1111
Fax: (81) 1352-8316
Manual Airmix
®
Automatic Electrostatic
Plural Components
Finishing
●
Fluid Handling
●
Dispensing
© 2010 EXEL North America, Inc.
www.exel-na.com
Manual Electrostatic
Fluid Delivery
Selection Guide
Hose & Accessory
Selection Guide
LT 999-100-205
January 2010

Selection Guide - Kremlin Rexson Sames Worldwide

Transcription

Similar documents