www.apskarting.com

Transcription

www.apskarting.com

ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE ACCESSORIES
BRIGGS FLOWED
THROTTLE SHAFT
BRIGGS TANK BRACE BRACKET
Reduces fuel tank
vibration and increases
carburetor life, black
anodized finish.
WKA Legal for Stock
Classes
Part No.
AP3059
Racer Net
$12.86
PRECISION DRILLED BRIGGS JET KITS
Part No.
AP4242
Racer Net
$13.22
BRIGGS CARB ALLEN WRENCH
Contains 10 jets (Holder sold separately)
PART NO. DESCRIPTION RACER NET
AP2582 .046 -.055 (.001 Increments) $24.95
AP2583 .046 -.064 (.002 Increments) 24.95
Makes Installing Carb Mounting
Bolts Much Easier!
PART NO. RACER NET
AP971
5HP BRIGGS ALCOHOL
CONVERSION PARTS
PART NO.
AP2928
AP2929
AP2583
AP2234
AP2413
DESCRIPTION
BRIGGS MAG SIDE "TRICK" BEARING
RACER NET
#55 Drill Bit
#71 Drill Bit
10 Piece Jet Kit
Carb Bore Reamer
Carb Bore Hone 320 Grit
$1.19
1.49
24.95
24.00
27.51
Eliminate the hassle of installing a
crankshaft sleeve in a dual bearing
Briggs. Take all the headaches away
by replacing this bearing on a Briggs
crankshaft without requiring
replacement of sleeve. A MUST for
the serious-minded 4-cycle racer!
PART NO.
W4090
BRIGGS
PLASTIC
JETBLOCK
NOTE: Jets not included
PART NO.
AP2876
RACER NET
$4.00
INDIVIDUAL BRIGGS 5HP
ALCOHOL JETS
Racer Net $3.25 each
PART NO.
AP221446
AP221447
AP221448
AP221449
AP221450
AP221451
AP221452
AP221453
AP221454
AP221455
SIZE
.046"
.047"
.048"
.049"
.050"
.051"
.052"
.053"
.054"
.055"
PART NO.
AP221456
AP221457
AP221458
AP221459
AP221460
AP221461
AP221462
AP221463
AP221464
AP221465
$2.80
SIZE
.056"
.057"
.058"
.059"
.060"
.061"
.062"
.063"
.064"
.065"
RACER NET
$13.50
E.C. PCV
KIT
(Positive crank
case vent kit)
BRIGGS &
STRATTON
Blowing side cover gaskets and crank seals, plus losing oil into the
catch can has been a problem that all racers have had to face. Now
this is a problem that has been solved with the design of the E.C. PCV
Kit which pulls a vacuum on the bottom end which keeps the oil in the
engine and eliminates side cover gasket and crank seal failure. This
kit requires no machining to install.
PART NO.
DESCRIPTION
RACER NET
AP2309
AP5593
Briggs & Stratton Raptor
PVC Valve only
fits Animal and Raptor
$27.50
21.00
96 * All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice.
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE CARB ACCESSORIES
CARB BORE HONES
PART NO.
AP2412
AP2413
BRIGGS
CARB
SAVERS
DESCRIPTION
RACER NET
180 Grit 18mm/.709"
$18.33
320 Grit 18mm/.709"
27.51
.
PART NO.
DESCRIPTION
AP1903
No Linkage Tab
RACER NET
$9.71
BRIGGS
CARB SUPPORT
ADJUSTABLE CARB
BORE REAMER
PART NO.
SIZE
RACER NET
AP2234
.656" thru .718"
$24.00
Raptor Fuel Tank Screw Kit
BRIGGS/RAPTOR
"BELLCRANK LINKAGE"
ASSEMBLY
This super slick linkage set up for stock
Briggs carburetors allows "over the top"
cable hook up which most Briggs racers
prefer. Complete assembly includes
everything except cable and housing.
PART NO.
PART NO.
RACER NET
AP5327
$1.70
AP4136
AP970 (Return Spring)
Fits Raptor Carbs or new style
carbs with Butterfly Choke
PART NO.
PK280
RACER NET
$5.99
RACER NET
$9.95
1.20
FLOW PRINTED
BRIGGS & STRATTON
ALKY CARB
Throttle
Spring/Clevis
Flow Bench Tested for MAXIMUM
FLOW. The hot set-up for Stock
Classes (Alcohol only)
PART NO.
AP278
RACER NET
RACER NET
$146.28
RACER NET
$2.95
$141.75
GRIFFITH
REWORKED
BRIGGS STOCK
APPEARING ALKY
CARB
PART NO.
W3568
PART NO.
AP5301
More fuel flow and top performance for the Briggs engine are
assured with a Griffith modified
Briggs carb. Karters may now
burn exotic fuel(s) without danger
of carb starvation in the Stock
Appearing 4-Cycle classes. Not
stock class legal.
2 pc Throttle
Clevis
PART NO.
AP5322
RACER NET
$4.95
* All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice.
97
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE ACCESSORIES
RLV FLAT HEAD BRIGGS CURVED HEADERS
RLV 4-Cycle Curved Headers
RLV 4- Cycle Curved Headers for Silencers (no washers) are large volume and longer
for added low end torque. The curved design adds to the power at torque peak and keeps
them inside the rear bumper.
When selecting a pipe please use the following information as a guide:
Longer Length=more bottom end / Larger Diameter=more top end
Shorter Length=more top end / Smaller Diameter=more bottom end
PART NO.
RLV5415C
RLV5417C
RLV5419C
RLV5426C
RLV5453C
RLV5456C
RLV5459C
RLV5464C
RLV5454C
RLV5458C
RLV5460C
C = Curved
LENGTH
STAGE 1
STAGE 2
STAGE 3
USE SILENCER
18 1/2"
18 1/2"
18 1/2"
17"
17"
17"
17"
17"
15 3/8"
15 3/8"
15 3/8"
.780"
.840"
.875"
.905"
.920"
.960"
.995"
1.030"
.960"
.995"
1.030"
.875"
.875"
1.000"
1.055"
1.055"
1.055"
1.055"
1.055"
1.055"
1.055"
1.055"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
1.245"
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
RLVB91XL
SUGGESTED RESTRICTOR & CLASSES
RACER NET
Purple - (Check with engine builder)
All Restricted Engines
Restricted and Stock
Red, Gold & Stock
Red & Stock
Stock
Stock & Super Stock
Stock, Super Stock & Limited
Stock
Stock & Super Stock
Stock, Super Stock & Limited
$23.51
23.51
23.51
23.51
23.51
23.51
23.51
23.51
23.51
23.51
23.51
RLV ENVIRO-SAFE 4-CYCLE SILENCERS
RLV Enviro Safe 4-cycle silencers are WKA legal and IKF approved. These
silencers were designed to reduce the noise (4 dB to 6 dB) and backfire of the 4-cycle
engine, not the horsepower. We were able to accomplish this for all Briggs classes
except the Modified and Open. At the prompting of the karter, WKA mandated that
we keep the noise reduction, but increase the performance of the Modified and Open
silencer. With the advice and testing of many new kart shops and individuals, we are
pleased to offer the RLV B91MO designed specifically for Modified and Open
engines. (WKA legal).
PART NO.
RLVB91 ........
RLVB91L ......
RLVB91XL ....
RLVB91MO ..
RLVB91S ......
RLV4120 .......
RLVB91SL ....
RLVB91SXL .
RLVB91SK ...
AP2123 .........
AP2125 .........
DESCRIPTION
RACER NET
B91 1" Exhaust Silencer .......................................... $37.61
B91L 1 1/8" Exhaust Silencer .................................... 38.73
B91XL 1 5/16" Exhaust Silencer ................................ 37.61
B91MO 1 5/16" Exhaust Silencer for modified & open . 41.03
Shim for B91 Silencer .................................................. 1.37
MMRA Spec Silencer ................................................. 33.27
Shim for B91L Silencer ................................................ 1.37
Shim for B91XL Silencer .............................................. 1.37
4-cycle Silencer mounting kit ....................................... 8.18
Locking collar for RLVB91 ........................................... 5.82
Locking collar for RLVB91XL & RLVB91MO ............... 5.82
RLV FLAT HEAD BRIGGS STRAIGHT TRUMPET PIPES
Straight Trumpet Pipes are used for open pipe sprint and speedway racing. These pipes offer more mid-range and high end
torque at the expense of a little low end torque.
PART
NO.
RLV5380D
RLV5383D
RLV5386D
RLV5389D
RLV5392D
LENGTH
16.5"
16.5"
16.5"
16.5"
16.5"
STAGE 1 STAGE 2 STAGE 3
.875"
.905"
.930"
.955"
1.030"
1.000"
1.000"
1.000"
1.030"
1.030"
1.162"
1.162"
1.162"
1.162"
1.162"
SUGGESTED CLASS
RACER
NET
Junior to Stock
$ 29.51
Junior to Super stock
29.51
Stock to Super stock
29.51
Super Stock to Modified 29.51
Limited to Modified
29.51
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE ACCESSORIES
ROBERTSON NON-MUFFLED TORQUE TUBES
TORQUE TUBES WILL PULL YOU OUT OF A CORNER LIKE A FREIGHT TRAIN
TORQUE TUBES are the result of extensive track research and dyno testing. TORQUE TUBES
build great power and spread the power over a wide RPM band to give you maximum
performance. In most cases they will allow you to drop one or two teeth on the rear sprocket with
no reduction in RPM because of the additional RAM effect these unique staged pipes produce.
PART #
MODEL
AP2474 98-S
AP1747 LM-T
AP1749 OP-T
DESCRIPTION
RACER NET
Broad power for Stock
$38.85
Triple stage for Ltd. Mod. classes (8200 RPM - 9200 RPM). (Super Stock also). 38.85
Dual stage for big valve Open class engines on tight tracks
38.85
ROBERTSON NON-MUFFLED
FLARED TORQUE TUBES
PART # MODEL
DESCRIPTION
RACER NET
AP2285 LM-T-S-F
Flared version for Senior Stock Classes
AP2287 LM-T-F
Flared version of the LM-T pipe AP1747
AP2289 OP-T-F
Flared version of the OP-T pipe AP1749
NOTE: In most cases the flared pipes will enhance performance.
$45.10
45.10
45.10
ROBERTSON CURVED MUFFLED TORQUE TUBES
PART # MODEL
AP1983
AP2275
AP2276
AP2277
DESCRIPTION
RACER NET
1R-MC
Curved staged header for WKA purple & IKF blue restrictor plate classes.
Pulls hard to 4900 RPM Uses RLVB91L muffler. (sold separately).
AR-MC Curved, staged header for WKA rookie, IKF Jr. 1. engines up to 5400 RPM
& WKA Aqua plate. Uses RLVB91XL muffler. (sold separately).
1T-MCxx Curved, staged header for unrestricted Jr. & Stock classes, especially with
fast ramp cams. Use RLVB91XL muffler. (sold separately).
LM-MC Curved, staged header for Limited Modified & Super Stock. Use RLVB91XL
muffler. (sold separately).
$35.10
35.10
35.10
35.10
ROBERTSON "VENTURI" PIPES
Venturi is built into the flange end of the pipe to cause dramatic pressure drop at the
port resulting in increased performance throughout the entire power range.
Muffled pipes do not include silencer.
V-LOOP VENTURI PIPE
Broad Power Band for Stockers
with Fast Ramp Cams
PART NO.
MODEL
DESCRIPTION
RACER NET
AP4028
2000-VM Has "over the tank curve". Use on Offset chassis.
Requires RLVB91XL silencer.
AP4029
LM-V
AP4330
FB-VMC Fat Boy Venturi Pipe for .425 & .500 restrictor plates.
Requires RLVB91XL Silencer
$43.10
Non-muffled Limited Modified header (especially strong
46.10
top end and broad power range for Stock appearing engines.)
PART NO.
AP4331
43.10
RACER NET
$77.91
99
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE ACCESSORIES
Colored Header Wrap
12’ & 25’ Rolls
High temperature header wrap, available in 7 colors.
Features include: Improved abrasion resistance, irregular
textile surface allows increased air movement for greater heat dispersion,
flexible weave allows for effective wrapping,
operating temperature and color retention to 1200 degrees, specially treated
for up to 3 times the life of other header wraps.
Part No.
AP4689BK
AP4689BL
AP4689N
AP4689O
AP4689P
AP4689R
AP4689Y
AP4690BK
AP4690BL
AP4690N
AP4690O
AP4690P
AP4690R
AP4690Y
Description
12’ Black Header Wrap
12’ Blue Header Wrap
12’ Natural Header Wrap
12’ Orange Header Wrap
12’ Purple Header Wrap
12’ Red Header Wrap
12’ Yellow Header Wrap
25’ Black Header Wrap
25’ Blue Header Wrap
25’ Natural Header Wrap
25’ Orange Header Wrap
25’ Purple Header Wrap
25’ Red Header Wrap
25’ Yellow Header Wrap
Racer Net
$18.95
22.95
22.95
22.95
22.95
22.95
22.95
43.95
43.95
43.95
43.95
43.95
43.95
43.95
HEADER WRAP
DRILLED ALLEN BOLTS
WITH SAFETY WIRE
New high-tech material retains heat in the headers.
Improves scavenging.
Sold in 10 Packs
PART NO.
DESCRIPTION
RACER NET
50 Feet
10 Feet
$42.00
9.95
AP1202
AP1202A
21” HEADER PIPE SLEEVE
PART NO.
AP2422
PART NO.
DESCRIPTION
RACER NET
AP4332
1/4"
$4.95
AP4333
5/16"
6.30
AP4602 6mm Fits Metric Animal and
6.38
World Formula
AP4973
8mm fits Honda and Kohler
6.38
RACER NET
$21.95
BILLET HEADER SUPPORT
PART NO.
DESCRIPTION
G1526
Billet Header Strap Support
BRIGGS COPPER EXHAUST GASKET
Can be used over and over again! Fits Animal & Raptor
RACER NET
$8.99
BRIGGS EXHAUST GASKET
PART NO.
W5623
W5624
PART NO.
RACER NET
W4855
G1018
$2.01
692237
691893
DESCRIPTION
RACER NET
.060” thick 1.160” bore fiber exhaust
$.94
gasket fits Animal and Raptor
.94
1.04
.070” thick .930” bore coated metal
1.88
exhaust gasket fits Animal and Raptor
.070” thick .930” bore coated metal
1.46
exhaust gasket (Fits World Formula Only)
CARBS, MANIFOLDS, FILTER
ADAPTERS
PART NO.
MODEL/DESCRIPTION
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
RACER NET
STOCK TILLOTSON CARBURETORS
HL357B ..... Alky carb w/ .625" Venturi & 8.000" throttle bore, Stock Engines, 2 & 4 Cycle ........................................ $73.83
HL304WX .. Gas carb w/ .875" Venturi & 1.005" throttle bore, big valve, Clone, Animal, Honda & Spec 2-cycle ........ 106.95
HL334B ..... Gas carb w/ .750" Venturi & 1.000" throttle bore, Briggs, Tecumseh, Kohler & Honda OHV ................... 135.60
HL334AB .. Gas carb used in many Tag and Cadet classes ....................................................................................... 135.60
AP4363 ..... HL334WX Gas Carb .790" Venturi, Briggs, Honda, Clone with stock valves ........................................... 106.95
HL348F ..... Alky carb w/ .875" Venturi & 1.000" throttle bore, Limited Modifieds, Tecumseh & Short Track .............. 110.17
HL360A ..... Gas carb w/ .945" Venturi & 1.060" throttle bore, Euro 5, Reed Jets, CIK & FIA legal ............................... 91.14
E.C. CNC MACHINED BILLET MANIFOLDS & AIR FILTER ADAPTERS
AP1396 ..... 2.000" long, 1.800" hole spacing, 1.060" carb flange, 1.875" block flange, Long Tracks ......................... $33.59
AP2364 ..... 2.000" long, 1.800" hole spacing, 1.125" carb flange, 1.875" block flange, (for HL-380) ........................... 33.59
AP4133 ..... Tillotson manifold for Briggs Animal, Intek, Kohler ..................................................................................... 39.88
AP4197 ..... Tillotson manifold for Honda GX-160, GX-200 and Clone .......................................................................... 41.95
AP4554 ..... Tillotson HL357 manifold for 5HP Briggs .................................................................................................... 34.64
AP2365 ..... Ram Flow velocity stack for HL348 D&E, HL 355E & HL360C 1.95" Bolt Center 1.3" Bore ...................... 13.59
AP4038 ..... Ram Flow velocity stack for HL-380 1.95" Bolt Center 1.4" Bore ............................................................... 13.59
AP1059 ..... Ram Flow velocity stack for HL-304, HL-314, HL-383 & HL336 1.375" Bolt Center 1.1" Bore .................. 13.59
AP4039 ..... Ram Flow velocity stack for HL-334, HL-365 & HL360A 1.75 Bolt Center 1.16" Bore ............................... 13.59
G2237 ........ Filter Adapter for HL357 carb 1.125" Bolt Center .870" Bore ..................................................................... 13.59
AP4364 ..... Ram Flow velocity stack for HL334WX ...................................................................................................... 12.95
AP4365 ..... Throttle linkage arm (fits all) ....................................................................................................................... 15.95
BRIGGS THROTTLE KIT FOR
TILLOTSON CARBS
This new trick throttle kit allows for quick
and easy application when you are
using a Tillotson carb on your
Briggs engine.
MISCELLANEOUS
GASKETS
PART NO.
DESC.
AP2439
Manifold to
block gasket
1.8" bolt space
.125" thick
Carb to manifold
gasket
.015" thick
1.050" bore
W5626
Part No.
AP1267
Racer Net
$10.20
RACER NET
$.92
.92
BILLET
FUEL STRAINER COVER
Designed to fit any HL series Tillotson carb
or the Horstman fuel pump.
Part No.
Description
Racer Net
AP5413
Black Only
$13.95
101
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TILLOTSON CARB PARTS
Legend for ordering replacement Tillotson
Carb Parts
Code A = HL-314F, HL-314G, HL-339A, HL-341A,
HL-342A, HL-348A,B,C,D, HL-368A, HL-374A
Code B = HL-360A, HL-1A*
Code C = HL-355A,B,C,D
Code D= HR-181, HR-184, HR-190A, HR191C, HR-191G
Code E = HL-227A, HL-232*, HL-250A-E, HL-306A, HL-334A,
HL334B, HL-365*, B
Code F = HL-363A, B
Code G = HL-132B, C, E, HL-166B, C, HL-357A, B
Code H = HL-383A, B
Code I = HL-348E, HL-355E, HL-360B, C
Code J = HL-380A, B
"TRIC-KIT" PRESSURE CHECKER
With the special
"Tric-Kit" provided,
our new pressure
checker is great for
checking your carb's
needle "pop-off"
pressure. Also may
be used as leak
detector.
PART NO.
G4464
G4467
REF #
3
9
10
11
12
13
14
15
16
17
18
19
20
21
21A
21B
21C
21D
23
24
25
26
26A
27
DESCRIPTION
Complete "Tric-Kit"
Rebuild kit for "Tric-Kit" pump
PART NO.
TIL17955
TIL17957
TIL17963
TIL16B217
TIL237600
TIL91A303
TIL91A275
TIL16B216
TIL16B241
TIL16B252
TIL16B233
EC219
TIL237154
TIL237141
TIL237214
TIL198305
TIL14162
TIL15B422
TIL95174
TIL95170
TIL16B205
TIL91A304
TIL91A351R
AP5413
TIL15B313
TIL43991
TIL43967
TIL43388
EC388
TIL24B449
TIL78A256
TIL78A245
TIL44270
TIL15B297
TIL15B338
TIL24B131
TIL155A23
TIL155A27
TIL15B329
TIL3279
TIL233669
TIL233665
TIL233714
TIL233706
TIL233705
RACER NET
$58.86
11.15
DESCRIPTION
WELCH PLUG
WELCH PLUG
WELCH PLUG
DIAPHRAGM GASKET
DIAPHRAGM
DIAPHRAGM COVER
DIAPHRAGM COVER
FLANGE GASKET
FLANGE GASKET
FUEL PUMP GASKET
FUEL PUMP GASKET
HIGH VOLUME FUEL PUMP GASKET
FUEL PUMP DIAPHRAGM
FUEL PUMP DIAPHRAGM (THICK)
FUEL PUMP DIAPHRAGM (THIN)
FUEL PUMP BODY
FUEL PUMP BODY
FUEL PUMP BODY SCREW
FUEL STRAINER SCREEN (BRASS MESH)
FUEL STRAINER SCREEN (SILVER) FOR GAS
FUEL STRAINER COVER GASKET
FUEL STRAINER COVER (BLUE)
RED HIGH FLOW FUEL STRAINER COVER
BILLET FUEL STRAINER COVER (BLACK ONLY)
FUEL STRAINER COVER SCREW
IDLE MIXTURE SCREW
IDLE MIXTURE SCREW
IDLE MIXTURE SCREW
IDLE MIXTURE SCREW (HIGH FLOW)
IDLE MIXTURE SCREW SPRING
IDLE MIXTURE SCREW WASHER
IDLE MIXTURE SCREW WASHER (THICK)
IDLE MIXTURE SCREW PACKING
IDLE SPEED SCREW
IDLE SPEED SCREW
IDLE SPEED SCREW SPRING
INLET CONTROL LEVER (NON-CAPTIVATED)
INLET CONTROL LEVER (CAPTIVATED)
INLET LEVER FULCRUM SCREW
INLET LEVER FULCRUM PIN
INLET NEEDLE & SEAT (NON-CAPTIVATED)
INLET NEEDLE & SEAT (CAPTIVATED)
INLET NEEDLE & SEAT (NON-CAPTIVATED) HL166B,C, HL357A,B
INLET NEEDLE & SEAT (CAPTIVATED) HL166B,C, HL357A,B
INLET NEEDLE & SEAT (NON-CAPTIVATED) HL365,HL314G
RACER NET
$.62
.62
.62
.48
4.29
6.41
6.95
.63
.72
.48
.48
.90
2.19
2.09
1.89
11.88
8.19
.68
.80
.68
.48
2.43
2.43
13.95
.56
9.45
5.95
2.73
13.50
.50
.62
.62
.66
2.06
.69
.45
.63
.63
.52
.48
6.62
6.62
8.53
8.53
8.53
A B C D E F G H I
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X X
X X
X X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X X X
X X X
X X
X X
X X X
X
X
X
X
X X
X X
X X
X
X X
X X
X
X X
X X
X X X
X X
X X X
X X X
X X X
X X X
X X X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X
J
X X
X
X
X
X
X
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TILLOTSON CARB PARTS
REF #
PART NO.
DESCRIPTION
27A
TIL34221
TIL34216
EC018B
EC018C
TIL36A27
TIL36A38
TIL36A28
TIL16B199
TIL24B323
TIL24B299
TIL24B345
EC001
EC002
EC003
EC998
TIL6738
TIL15B343
TIL237155
TIL16B253
TIL43987
TIL43988
TIL43966
TIL43401
TIL43388
TIL43967
TIL24B449
TIL24B247
TIL78A256
TIL78A226
TIL44270
TIL44277
TIL80332
TIL363517
TIL363503
TIL363501
TIL363508
TIL47A276
TIL47A286
TIL47A289
TIL131586
TIL131592
TIL131894
TIL132084
TIL132135
EC999A
EC889
TIL29218
TIL29224
TIL29226
TIL15C18
TIL15C29
TIL24B291
TIL24B328
TIL24B357
TIL24B381
TIL14A34
TIL14407
TIL14A2
TIL14415
TIL14A52
TIL14A66
TIL15C29
EC017
4550
DG1HL
RK102
RK103
RK104
RK105
VITON NEEDLE (RED TIP NON-CAPTIVATED)
VITON NEEDLE (RED TIP CAPTIVATED)
ALLOY NEEDLE (NON-CAPTIVATED)
ALLOY NEEDLE( CAPTIVATED)
INLET SEAT (SHORT, GAS)
INLET SEAT (SHORT, ALKY)
INLET SEAT (LONG, GAS)
INLET SEAT GASKET
INLET TENSION SPRING
INLET TENSION SPRING (STANDARD RATE)
INLET TENSION SPRING (HARD RATE)
INLET TENSION SPRING (MEDIUM RATE)
INLET TENSION SPRING SHIM KIT
INLET VALVE BODY
FUEL PUMP BODY SCREW (ALKY)
INLET VALVE DIAPHRAGM
INLET VALVE GASKET
HIGH SPEED MIXTURE SCREW
HIGH SPEED MIXTURE SCREW (HL166B)
HIGH SPEED MIXTURE SCREW (HL166C)
HIGH SPEED MIXTURE SCREW SPRING
HIGH SPEED MIXTURE SCREW SPRING
HIGH SPEED MIXTURE SCREW WASHER
HIGH SPEED MIXTURE SCREW WASHER
HIGH SPEED MIXTURE SCREW PACKING
HIGH SPEED MIXTURE SCREW PACKING
VAPOR SCREEN PLUG, HL357A,B,HL383A,B
NOZZLE CHECK VALVE (HL166B,C)
NOZZLE CHECK VALVE (GAS)
NOZZLE CHECK VALVE (GAS ONLY)
NOZZLE CHECK VALVE
NOZZLE VALVE (HL355A & HL360A)
NOZZLE VALVE (HL348E,HL355E, HL360B,C)
NOZZLE VALVE (HL380A,B)
THROTTLE SHAFT,HL166B,C
THROTTLE SHAFT, HL314A
THROTTLE SHAFT, (HL360A) DOWN PULL
THROTTLE SHAFT
THROTTLE SHAFT (HL348E, HL355E, HL360B,C) (HL380AB)
THROTTLE SHAFT (HL355A,B,C,D)
THROTTLE SHAFT (UP PULL)
THROTTLE SHAFT CLIP
THROTTLE SHAFT CLIP
THROTTLE SHAFT CLIP
THROTTLE SHAFT CLIP SCREW
THROTTLE SHAFT CLIP SCREW
THROTTLE SHAFT RETURN SPRING
THROTTLE SHUTTER (.825")
THROTTLE SHUTTER (1.000")
THROTTLE SHUTTER SCREW (STOCK)
THROTTLE SHUTTER BUTTON HEAD SCREW
DIAPHRAGM & GASKET KIT
DIAPHRAGM & GASKET KIT
REBUILD KIT
REBUILD KIT
REBUILD KIT
REBUILD KIT
28
29
29X
29A
29B
29C
29D
30
30A
30B
30C
30D
A4
33
35
36
37
38
RACER NET
3.29
2.22
1.15
1.15
3.89
4.40
4.12
.48
1.28
.83
1.04
1.28
.92
.92
8.91
6.28
.83
2.19
.48
8.51
6.56
6.99
2.64
2.73
5.95
.50
.77
.62
.58
.66
.65
1.35
6.92
5.60
5.31
6.87
5.00
5.00
5.00
11.49
10.68
13.74
20.97
10.68
10.30
14.48
.62
.62
.62
.56
.56
.45
.68
.68
.83
1.31
.99
2.93
1.44
2.50
1.91
2.36
.78
4.87
4.65
17.64
14.12
14.12
14.39
A B C D E F G H I
J
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X X
X X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X X
X
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X
X X X
X
X
X X X
X
X
X
X X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X
X
X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X X
X
X
X
X X
X
X
X X X
X X X
X
X
X X
X
X
X X X
X
X X X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X X
X X
X X
X
X X
X X
X X
X
X
X
X
X
X
X
X X X
X X X
X X
X
X
X X
X
X
X
X
X
X
FULCRUM ARM
HEIGHT GAUGE
Quickly measures the fulcrum arm height
on most Walboro & Tillotson carbs.
PART NO.
AP2549
RACER NET
$6.95
103
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE ACCESSORIES
CARBON FIBER FLYWHEEL SCREENS
Fits Briggs "Animal & Raptor" - $12.18 Racer Net
PLASTIC FLYWHEEL
SCREENS
AP5217
Fits Raptor, Animal and World Formula.
Available in Blue, Black, Orange, Red &
Yellow. Please indicate color
when ordering.
AP5218
PART NO.
RACER NET
AP1286
$3.10
SPIRAL DESIGN
ALUMINUM FLYWHEEL SCREENS
Fits Raptor, Animal and
World Formula.
AP5219
AP5220
AP5221
CKi1060
CKi1061
CKi1062
CKi1063
CKi1064
CKi1065
CKi1066
CKi1067
CKi1068
DESCRIP.
COLOR
RACER NET
Silver
Gold
Red
Black
Blue
$9.95
9.95
9.95
9.95
9.95
AP5222
OFFSET FLYWHEEL KEYS
PART NO.
PART NO.
AP1151
AP1151G
AP1151R
AP1151BK
AP1151BL
RACER NET
Offset key kit contains
8 keys used for
advancing ignition
timing using B/S
Magnetron ignition.
Includes 1 each:
.020, .030, .040,.050,
.060, .070, .080,.090
$7.66
.020 (1 Key)
.030 (1 Key)
.040 (1 Key)
.050 (1 Key)
.060 (1 Key)
.070 (1 Key)
.080 (1 Key)
.090 (1 Key)
$1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
BRIGGS & STRATTON
HOT COIL
Two models
available,
one for the
5HP flywheel
& one for the
smaller 3HP
flywheel.
Note: Not
legal as
a stock coil.
PART
NO.
AP1886
AP1887
DESCRIPTION
3 HP Flywheel Hot Coil
5 HP Flywheel Hot Coil
RACER
NET
$35.95
35.95
BRIGGS COIL BRACKET
with HARDWARE
Relocates the coil on the 5HP block so you
can use the smaller and lighter 3HP
flywheels. Requires minor modification
when used with stock coil.
PART
NO.
AP4081
AP4082
DESCRIPTION
3HP Coil to 3HP Flywheel
5HP Coil to 3HP Flywheel
RACER
NET
$14.64
14.64
CLONE PARTS & ACCESSORIES
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
CLONE EXHAUST GASKET
PART NO.
AP5300
RACER NET
$0.90
Part No.
Desc.
RLV4117
AKRA/WKA
Threaded Silencer
Racer
Net
$15.95
RLV F200 EXHAUST SYSTEMS
PART NO.
DESCRIPTION
RACER NET
RLV5522 ......Honda GX200 Header for OHV Engine ......................$39.38
RLV5524 ......Honda GX200 Pipe for OHV Engine..............................22.43
RLV5526 ......Honda GX200 Header/Pipe Kit for OHV Engine............67.32
RLV5526K5 ....Honda GX200 Complete Kit w/Silencer ......................146.16
CLONE 12” HEADER
WASHER END
PART NO.
AP5364
RACER NET
$19.95
Part No.
Desc.
Racer
Net
AP5240 Candy Cane Header $49.20
(mid and top)
Req. RLVB91XL Muffler
Part No.
Desc.
AP5474
Loop Header
Racer
Net
$78.90
Part No.
Desc.
Racer
Net
AP5263 AKRA Clone Header $23.95
(Uses RLV4117 Silencer, sold seperately)
Part No.
Desc.
Racer
Net
(mid and top)
Washer End
(mid and top)
Flared end
Part No.
Desc.
ARC6270
ARC Billet Rod
With Inserts
Replacement
Inserts
ARC6394
Part No.
Desc.
RLV5436C RLV GX-160/200
and Clone Header Pipe
Req. RLVB91 Muffler
Part No.
Desc.
Racer
Net
$83.95
Part No.
Desc.
$17.50
ARC6618
ARC Billet
Adjustable Flywheel
Racer
Net
$30.75
Racer
Net
AP5246
Super Snake-2
$49.20
Header Pipe (wide range)
Racer
Net
$175.00
Part No.
Desc.
Racer
Net
RLV5438C
RLV Clone
$20.99
Part No.
Desc.
Racer
Net
AP5247
Super Snake-2
$49.20
Washer end
Racer
Net
ARC6619
ARC Billet
$100.00
Non-Adjustable Flywheel
Part No.
Desc.
106 All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
WELDED ROCKER ARM
PART NO.
AP5352
RACER NET
$12.67
CLONE HEAT TREATED
RETAINER
PART NO.
AP5350
AP5351
DESC
RACER
NET
HEAT TREATED
$5.92
INT. RETAINER
HEAT TREATED
$5.92
EXH. RETAINER
CLONE INT/EXH VALVE
SPRING (18lb)
PART NO.
AP5348
RACER NET
$8.25
HEAT TREATED
ROCKER ARM
PART NO.
AP5357
RACER NET
$12.67
STOCK “CHEATER” VALVE
SPRING
PART NO.
DESC
RACER
NET
AP5438 STOCK “CHEATER” $3.95
VALVE SPRING
MORE SEAT PRESSURE
BUT STILL PASSES STOCK
CLASS TECH
BILLET ROCKER STUD
CORRECTED ROCKER ARM
1.2 RATIO
PART NO.
AP5359
RACER NET
$11.95
HEAT TREATED ROCKER
ARM STUD
PART NO.
AP5353
PART NO.
AP5495
RACER NET
$17.16
CORRECTED ROCKER ARM
1.3:1 RATIO
RACER NET
$10.73
CLONE HEAT
TREATED PUSH ROD
RACER NET
$9.95
PART NO.
AP5349
RACER NET
$6.85
BILLET ROCKER ARM SET
1.3: RATIO
VALVE SPRING
KEEPER
(1 PAIR)
VALVE SPRING RETAINER
(SOLD EACH)
AP5425
DESC
RACER
NET
$5.93
USE WIT AP5425
RETAINER
USE WITH SI
AFTERMARKET
CLONE/GX200 VALVES
CLONE INT/EXH VALVE
BLUEPRINTED
(STK LEGAL)
RACER NET
$137.80
PART NO.
AP5436
PART NO.
RACER NET
$5.20
BRONZE REPL.
VALVE GUIDE
+.004” O.D.
PART NO.
AP5497
PART NO.
AP5496
BILLET GUIDE PLATE
PART NO.
AP5494
RACER NET
$6.10
PART NO.
AP5426
RACER NET
$8.25
CLONE VALVE TRAIN KIT
PART NO.
AP5366
AP5367
RACER NET
$14.66
14.66
SI STAINLESS STEEL CLONE/GX200 VALVES
PART NO.
AP5419
DESCRIPTION
RACER NET
$ 15.75
28.5mm big intake valve
(Requires AP5424 valve seat)
AP5420
27mm big intake/exhaust valve
15.75
AP5421
25mm std. intake/big exhaust valve
15.75
AP5422
23.6mm undersize exhaust valve
15.75
Flows more on stock seat
AP5423
24mm std. exhaust valve
15.75
(NOTE) these valves use the AP5425 retainer and
the AP5426 keepers (sold separately)
Includes:
1-26mm (1.024”) intake valve almost 10% more flow area, 1-24mm (.945”) exhaust valve
2- 1.3 :1 rockers giving the stock cam almost .290” lift, 2- 18lbs seat pressure valve springs
2- billet retainers, 2- hardened locks, 2- valve stem wear caps
2- .060” valve spring shims, 1- billet push rod guide plate
All necessary parts included and everything is a bolt in except the intake must be enlarged
(.040” ) to accommodate the larger intake valve
PART NO.
AP5435
RACER NET
$ 78.95
All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice
107
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
Part No.
Desc.
AP5266 Clone HDPE Filter
Adapter 2 1/2” O.D.
Part No.
Desc.
AP5289
Clone Linkage Kit
Racer
Net
$9.95
Part No.
Desc.
Racer
Net
ARC6931 Billet Aluminum
$12.00
Air Filter Adapter 2 1/2” O.D
Part No.
Desc.
Racer
Net
AP5227
Stamped Steel
$8.95
Air Filter Adapter 2 1/2” O.D.
CLONE ALUMINUM FILTER
ADAPTER 2 1/2” O.D.
PART NO.
AP5321
RACER NET
$9.98
Racer
Net
$8.95
CHOKE HOLD
BLUEPRINTED STK CARB
PART NO.
AP5360
SUPER BOX CLASS CARB
RACER NET
$59.95
PART NO.
AP5361
RACER NET
$99.95
Part No.
Desc.
DJ1257
Use withARC6931
Filter Adapter
Racer
Net
$2.95
CLONE JET BLOCK
PART NO.
DESC
AP5346
RACER
NET
$34.95
CLONE JET
BLOCK W/JETS
AP5355 CLONE JET BLOCK $7.42
(LESS JETS)
AP535436
.036 (64)
$3.95
.037 (63)
$3.95
AP535437
AP535438
.038 (62)
$3.95
AP535439
.039 (61)
$3.95
AP535440
.040 (60)
$3.95
AP535441
.041 (59)
$3.95
AP535442
.042 (58)
$3.95
CLONE CUT THROTTLE
PART NO.
CLONE EMULSION
TUBE (HP)
PART NO.
AP5362
RACER NET
$13.42
AP5363
AP5372
DESC
CUT THROTTLE
SHAFT
RACER
NET
$21.72
CUT THROTTLE $21.72
SHAFT (STK LEGAL)
CLONE TILLOTSON
CARBURETOR KIT
PART NO.
AP5437
RACER NET
$195.00
CLONE TOP PLATE
PART NO.
DESC
RACER
NET
AP5312 CLONE TOP PLATE $21.95
(Yellow & Old Style
Blue Engines)
AP5356 CLONE TOP PLATE $21.95
(New Style Blue Engines)
CLONE VALVE COVER
W/PULSE FITTING
PART NO.
AP5368
RACER NET
$9.95
CLONE CYL HEAD
BLUEPRINTED
PART NO.
AP5369
RACER NET
$90.95
CLONE CYL HEAD
BIG VALVES, PORTED &
POLISHED
PART NO.
AP5370
RACER NET
$195.95
108 All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
DYNO CLONE CAMS
“*** Modified cams require use
of upgraded valve springs,
billet rod &
billet flywheel “
WELDED CLONE
CRANKSHAFT
PART NO.
AP5347
RACER NET
$69.95
DYNO DUAL SPRINGS &
RETAINERS
.
DESC
PART NO.
AP5493 Heavy. Dual Valve
Springs
RACER
NET
$25.00
PART NO.
MODEL
AP5313
AP5314
AP5626
AP5513
AP5571
AP5572
AP5489
AP5315
AP5490
CS
CM
CL1-i
CL1-M
BS-216
BS-220
275
308
356
RACER
NET
$49.95
49.95
37.50
34.95
49.95
49.95
106.89
106.89
106.89
FUEL TANK CAPS
PART NO.
AP5406
AP5407
DESC
METAL CAP
PLASTIC CAP
RACER
NET
$7.35
$6.93
CLONE VALVE LIFT AND
CAM PROFILE GUAGE
PART NO.
K&N AIR FILTER
PART NO.
RACER
NET
$75.00
AP5412
HA0201
DESC
K&N Stock
Replacement Air Filter
RACER
NET
$32.19
CLONE GX200 FUEL TANK FITS
YELLOW, EARLY BLUE AND GX200
PART NO.
AP5405
CLONE RESTICTOR PLATES
PART NO.
AP5553
DJ1425
DJ1500
DJ1550
DESC
RED . 375”
SILVER . 450”
PURPLE . 500”
BLUE . 550”
RACER
NET
$10.00
$10.00
$10.00
$10.00
RACER NET
$32.95
CLONE ALUMINUM NUT
CLONE FILE FIT
STD RINGS
PART NO.
AP5311
RACER NET
$12.95
PART NO.
AP5404
All prices, terms, manufacturers design changes, product specifications and availability subject to change without notice
RACER
NET
$14.41
109
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
NORAM 1" CLUTCHES
MINI CUP SERIES
STAR, MINI-CUP & ENFORCER CLUTCHES
Engagement Speeds
1" Bore
Outboard
Mount Only
#35 Chain
Sold with Red
Springs
Installed
NORAM "MINI CUP" CLUTCH PARTS
PART NO.
AP2758 .....
AP2759 .....
AP2761 .....
AP2762 .....
AP1880 .....
AP1881 .....
AP1882 .....
AP1883 .....
AP1884 .....
AP1885 .....
W3733 .......
W3735 .......
..................
NEEDED
DESCRIPTION
PER CLUTCH RACER NET
Snap Ring ............................... 1 ..................... $.87
Fiber Washer .......................... 1 ....................... .87
1" Hub ..................................... 1 ................... 67.60
Clutch Shoe ............................ 3 ................... 16.20
Red Spring .............................. 3 ..................... 4.35
White Spring ........................... 3 ..................... 4.35
Blue Spring ............................. 3 ..................... 4.35
Purple Spring .......................... 3 ..................... 4.35
Green Spring .......................... 3 ..................... 4.35
Plain Spring ............................ 3 ..................... 4.35
Replacement Bushing for 12 Tooth ................. 7.80
Replacement Bearing for 13 Tooth .................. 9.10
and up Drums
"ENFORCER" CLUTCHES
This clutch was developed to replace the
"Brutus" clutch. This clutch fits 1" shaft engines
and can run outboard only. "Enforcer" clutches
are shipped with purple springs and use the
same springs as the "Mini Cup" clutch.
Part#
AP1880
AP1881
AP1882
AP1883
AP1884
AP1885
Color
RED
WHITE
BLUE
PURPLE
GREEN
PLAIN
Star
Mini-Cup
2500RPM 1700RPM
2800RPM 1850RPM
3100RPM 2100RPM
3400RPM 2400RPM
3700RPM 2550RPM
4000RPM 2700RPM
Enforcer
1450RPM
1650RPM
1800RPM
2000RPM
2150RPM
2400RPM
NORAM "MINI CUP" CLUTCH ASSEMBLIES
PART NO.
TEETH
RACER NET
AP2714 ...................................... 12 .............................. $161.95
AP2715 ...................................... 13 ................................ 161.95
AP2716 ...................................... 14 ................................ 161.95
AP2717 ...................................... 15 ................................ 161.95
AP2718 ...................................... 16 ................................ 161.95
AP2719 ...................................... 17 ................................ 161.95
AP2720 ...................................... 18 ................................ 161.95
"MINI CUP" CLUTCH DRUMS
DRUM PART NO.
AP2744
AP2745
AP2746
AP2747
AP2748
AP2749
AP2750
TEETH
................................. 12
................................. 13
................................. 14
................................. 15
................................. 16
................................. 17
................................. 18
RACER NET
............................. $109.95
............................... 109.95
............................... 109.95
............................... 109.95
............................... 109.95
............................... 109.95
............................... 109.95
Due to the extreme conditions that clutches are operated under there
are NO EXPRESS OR IMPLIED WARRANTIES ON CLUTCHES.
PART NO
DESCRIPTION
RACER NET
AP3065 ......... Complete clutch w/10T #40/41 chain drive sprocket ......... $193.95
AP3066 ............ Complete clutch w/12T #35 chain drive sprocket .............. 193.95
AP3073 ............................................ Washer .................................................. 4.30
AP3074 ......................................... Stub Shaft .............................................. 24.99
AP3075 ............................................ Bearing ................................................ 13.65
AP3076 ......................................... Snap Ring ................................................ 3.88
AP3077 ....................................... Hub w/shoes ............................................ 98.10
AP3078 .................................. Lined Shoe ( 3 req.) ...................................... 26.20
AP3079 .............................. 10T #40/41 Clutch Drum ................................. 111.95
AP3080 ................................. 12T #35 Clutch Drum ................................... 111.95
AP3081 ................................. 13T #35 Clutch Drum ................................... 111.95
AP3082 ................................. 14T #35 Clutch Drum ................................... 111.95
AP3083 ................................. 15T #35 Clutch Drum ................................... 111.95
AP3085 ................................. 17T #35 Clutch Drum ................................... 111.95
AP3086 ................................. 18T #35 Clutch Drum ................................... 111.95
Due to the extreme conditions that clutches are operated under there are NO EXPRESS OR IMPLIED WARRANTIES ON CLUTCHES.
STAR SERIES 4-CYCLE - 1" BORE - #35 CHAIN
Can be mounted Inboard or Outboard
ROTOR ASSEMBLY
Shoe
NO. OF
CLUTCH
RACER
REPLACEMENT RACER
TEETH
PART NO.
NET
DRUM PART NO. NET
13 ............. AP4971 ........... $149.95 .............. AP4972 ....... $109.95
14 ............. AP1859 ............. 149.95 .............. AP1867 ......... 109.95
15 ............. AP1860 ............. 149.95 .............. AP1868 ......... 109.95
16 ............. AP1861 ............. 149.95 .............. AP1869 ......... 109.95
17 ............. AP1862 ............. 149.95 .............. AP1870 ......... 109.95
18 ............. AP1863 ............. 149.95 .............. AP1871 ......... 109.95
MISC. REPLACEMENT PARTS
Drum Assembly
Washer
Spring
**Sold with Red Springs
Installed
Hub
Key
Due to the extreme conditions that clutches are operated
under there are NO EXPRESS OR IMPLIED
WARRANTIES ON CLUTCHES.
PART NO. DESCRIPTION
RACER NET
AP1875 ........ Hub ................................................. $67.60
AP1876 ........ Shoe ................................................. 15.75 per shoe
AP1877 ........ Washer .............................................. 2.85
AP1878 ........ Bushing .............................................. 7.30
AP1879 ........ Bearing ............................................. 19.20
AP3057 ........ Clutch Key (Tecumseh Star) ............... 10.95
AP1880 ........ Red spring-2500 RPM engage. ........... 4.35 per spring
AP1881 ........ White spring-2800 RPM engage. ......... 4.35 per spring
AP1882 ........ Blue spring-3100 RPM engage. ........... 4.35 per spring
AP1883 ........ Purple spring-3400 RPM engage. ........ 4.35 per spring
AP1884 ........ Green spring- 3700 RPM engage. ....... 4.35 per spring
AP1885 ........ Plain spring- 4000 RPM engage. ......... 4.35 per spring
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
NORAM CHEETAH CLUTCH
Ref #
Part No.
Description
Qty. Req
Racer Net
1 ...................... NAC435 ................. Snap Ring ........................................................... 1 ...................................... $.95
3 ...................... AP3019 .................. Needle Bearing 14 tooth up ................................ 1 ...................................... 9.00
4 ...................... NAC695 ................. Housing ............................................................... 1 .................................... 33.65
5 ...................... NAC436 ................. Sprocket Retaining Ring ...................................... 1 ........................................ .95
6 & 8 ................... NAC214 ................. Thrust Washer ..................................................... 2 ........................................ .95 ea
7 ...................... NAC137 ................. Thrust Bearing ..................................................... 1 ...................................... 6.59
9 & 10 .................. NAC786 ................. Transmission Gear & Support Plate .................... 1 .................................... 79.95
11 & 13 ................. NAC249 ................. Friction Disc ......................................................... 2 .................................... 10.55ea
12 ..................... NAC250 ................. Floater Disc ......................................................... 1 ...................................... 8.60
14 ..................... NAC012 ................. Pressure Plate W/Bushing .................................. 1 .................................... 23.16
16 ..................... NAC253 ................. Lever ................................................................... 6 ...................................... 2.76 ea
17 ..................... NAC157 ................. Dowel Pin ............................................................ 6 ...................................... 1.35 ea
18 ..................... NAC254 ................. Lever Support ...................................................... 1 .................................... 39.56
19 ..................... NAC228 ................. Spring (Standard) .085" ....................................... 6 ...................................... 2.25 ea
....................... H464900 ................ Spring (Optional) .091" ........................................ 6 ...................................... 5.27
20 ..................... NAC042 ................. Socket Head Cap Screw ..................................... 6 ........................................ .80 ea
21 ..................... NAC437 ................. Retainer ............................................................... 6 ...................................... 2.05 ea
22 ..................... NAC043 ................. Adjusting Screw .................................................. 6 ........................................ .80ea
23 ..................... NAC215 ................. Outer Washer ...................................................... 1 ...................................... 1.90
2 ...................... AP298912 .............. 12T Sprocket w/Bushing ..................................... 1 .................................... 19.95
....................... AP298913 .............. 13T Sprocket w/Bushing ..................................... 1 .................................... 19.95
....................... AP298914 .............. 14T Sprocket w/Bearing ...................................... 1 .................................... 19.95
....................... H465100 ................ Special Clutch Key .............................................. 1 ...................................... 1.85
....................... NAC1315 ............... Complete “Cheetah” Clutch includes ......................................................... 179.95
........................................................ 13, 14 & 15 Tooth Sprockets
Due to the extreme conditions that clutches are operated under there are NO EXPRESS OR IMPLIED WARRANTIES ON CLUTCHES.
REPLACEMENT
FRICTION DISC
Clutch Retaining Bolt Kit
Available in three, four, six and eight Tab design.
PART NO.
AP5324
RACER NET
$1.70
PART
NO.
AP4071
AP4072
AP4073
AP4074
AP5288
DESCRIPTION
RACER
NET
3 Tab fits Horstman $20.27
HDC (4) Clutch
4 Tab fits SMC,
18.20
Bulley and Jammer
6 Tab fits HPV
20.27
8 Tab fits Bulley and 18.20
Jammer
3 Tab Horstman
17.58
Greased Lightning
111
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
NORAM CLUTCHES
GE Series
4-CYCLE RACING CLUTCH & DRUMS
•
•
•
•
•
•
•
Heat Treated Drums
Low Stress Springs
Case Hardened Sprockets
Powdered Metal Shoes
Easy Replacement of Parts
3/4" Shaft
#35 Chain Only
REPLACEMENT SHOES - Sold Each
PART NO.
DESCRIPTION
W3730
W3842
Standard Light Shoe
Standard Heavy Shoe
RC61 Shown
Racer Net...$2.20 per spring
Sold with red springs
CLUTCH W/HVY NO. OF BEARING
SHOES PART NO. TEETH
TYPE
RC60 .....................
RC61 .....................
RC64 .....................
RC66 .....................
RC68 .....................
RC70 .....................
RC72 .....................
RC60H ........
RC61H ........
RC64H ........
RC66H ........
RC68H ........
RC70H ........
RC72H ........
RACER
NET
11 ....... Oilite .... $67.99
12 ....... Oilite ...... 62.95
13 ..... Needle ..... 62.95
14 ..... Needle ..... 62.95
15 ..... Needle ..... 62.95
16 ..... Needle ..... 62.95
17 ..... Needle ..... 62.95
W3733
$7.80
W3735
$9.10
DRIVE
HUB
RETAINING
RING
W3729
$29.80
NA04
$.89
GE
HVY. SHOE LIGHT SHOE ULTIMATE
SHOE
Brown ..... W3720 ....... 1620 ......... 1800 .......... 1800
Black ....... W3721 ....... 1900 ......... 2100 .......... 2100
Red ......... W3722 ....... 2040 ......... 2500 .......... 2200
White ...... W3723 ....... 2470 ......... 2900 .......... 2700
Blue ........ W3724 ....... 2650 ......... 3200 .......... 2900
Purple ..... W3726 ....... 2900 ......... 3600 .......... 3000
Green ...... W3727 ....... 3200 ......... 4000 .......... 3400
Orange .... AP1351 ....... 3500 ......... 4400 .......... 3600
Brown ..... AP1352 ....... 3850 ......... 4900 .......... 3900
Red ......... AP1353 ....... 4200 ......... 5500 .......... 4300
REPLACEMENT DRUMS WITH
SPROCKET & BEARING
DRUM
PART NO.
W3736
W3737
W3738
W3739
W3740
W3741
NO. OF
TEETH
BEARING
TYPE
PART NO.
AZ8454 3/16" x 3/16" x 3/4" Key
FIBER
WASHER
W3732
$.87
ENGAGEMENT SPEED
SPRING
COLOR
REPLACEMENT PARTS 12T-20T CLUTCHES
BUSHING BEARING
OILITE NEEDLE
12T
13-20T
$10.95
10.95
GE, ARENA & GE CLUTCHES
REPLACEMENT SPRINGS
COMPLETE CLUTCHES
CLUTCH W/LGT
SHOES PART NO.
RACER NET
Racer Net...$0.25
REPLACEMENT PARTS FOR
11 TOOTH CLUTCH ONLY
PART NO.
DESCRIPTION
W5008
W5009
AP4118
W5007
W5006
RACER NET
Noram 11T Hub
$76.40
Noram 11T Steel Washer
1.00
Noram 11T Fiber Washer
2.20
Noram 11T Bushing
7.22
Noram 11T Drum & Sprocket 35.95
(Fits W5008 Hub Only)
RACER
NET
.............. 12 ................. Oilite ............... $35.95
.............. 13 ................ Needle ............... 35.95
.............. 14 ................ Needle ............... 36.95
.............. 15 ................ Needle ............... 36.95
.............. 16 ................ Needle ............... 36.95
.............. 17 ................ Needle ............... 36.95
CLUTCH
SPRING
TOOL
PART NO.
W3826
RACER NET
$15.95
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
NORAM CLUTCHES
ARENA SERIES CLUTCH BY NORAM
This new product is ideal for indoor racing or any type of short track competition.
Available in 9 and 10 tooth 3/4" bore #35 chain
PART NO.
DESCRIPTION
Outboard Mount Only
RACER NET
AP1897 ......................... 9 Tooth Light shoe clutch ............................. $133.95
AP1898 ......................... 9 Tooth Heavy shoe clutch ............................. 133.95
AP1899 ......................... 10 Tooth Light shoe clutch ............................. 133.95
AP1900 ......................... 10 Tooth Heavy shoe clutch ........................... 133.95
Shoes and springs are the same as used in the standard GE series clutch.
Listed below are the parts which are not interchangeable.
PART NO.
DESCRIPTION
RACER NET
AP2045 ......................... 9 Tooth Turned Drum and sprocket ................. $95.35
AP2046 ......................... 10 Tooth Turned Drum and sprocket .................. 95.35
AP1901 ......................... 3/4 special clutch hub ......................................... 60.60
AP1346 ......................... Bronze bushing 9 tooth drum ............................... 7.60
AP1347 ......................... Needle bearing 10 tooth drum ............................ 19.20
AP1349 ......................... Fiber washer ......................................................... 1.20
AP1902 ......................... Shaft spacer ....................................................... 12.90
AP1898 Shown
The Arena clutches are shipped with Red Springs
and use the same springs as the GE Series clutch.
Due to the extreme conditions that clutches are operated under there are
NO EXPRESS OR IMPLIED WARRANTIES ON CLUTCHES.
NORAM GE ULTIMATE CLUTCH
Alternate shoe configurations and variable torque settings dramatically
decrease clutch slippage. Replaceable sprockets help eliminate
frequent and costly drum replacement. The stamped drum features
venting holes for cooler operation and consistency. Thrust bearings
between the drive hub and drum for less drag. High tech linings provide
maximum coefficient of friction.
GE ULTIMATE CLUTCH
4 Cycle 3/4" Bore #35 Chain
PART NO
NAU1235
NAU1335
NAU1435
NAU1535
NAU1635
DESCRIPTION
RACER NET
.................... 12 Tooth Clutch ................... $106.95
.................... 13 Tooth Clutch ..................... 106.95
.................... 14 Tooth Clutch ..................... 106.95
.................... 15 Tooth Clutch ..................... 106.95
.................... 16 Tooth Clutch ..................... 106.95
REPLACEMENT SPROCKETS
PART NO
DESCRIPTION
RACER NET
AP298912 .................. 12T Sprocket #35 ................... $19.95
AP298913 .................. 13T Sprocket #35 ..................... 19.95
AP298914 .................. 14T Sprocket #35 ..................... 19.95
AP298915 .................. 15T Sprocket #35 ..................... 19.95
AP298916 .................. 16T Sprocket #35 ..................... 19.95
AP298917 .................. 17T Sprocket #35 ..................... 19.95
AP298918 .................. 18T Sprocket #35 ..................... 19.95
AP298919 .................. 19T Sprocket #35 ..................... 22.95
AP298920 .................. 20T Sprocket #35 ..................... 22.95
AP298921 .................. 21T Sprocket #35 ..................... 22.95
AP298922 .................. 22T Sprocket #35 ..................... 22.95
AP298921916 ........... 16T Sprocket #219 .................... 19.95
AP298921917 ........... 17T Sprocket #219 .................... 19.95
AP298921918 ........... 18T Sprocket #219 .................... 19.95
AP298921919 ........... 19T Sprocket #219 .................... 19.95
AP298921920 ........... 20T Sprocket #219 .................... 19.95
AP29894110 ........... 10T Sprocket #40/41 ................... 19.95
AP29894111 ........... 11T Sprocket #40/41 ................... 19.95
NOTE: The GE Ultimate & the Standard GE Clutch Parts are
NOT interchangeable.
GE ULTIMATE CLUTCH PARTS
PART NO
DESCRIPTION
RACER NET
NA04 ............................... Snap Ring ............................. $.89
NAC137 .................... Thrust Bearing Kit ....................... 6.59
NAU061 ..................... Clutch Drive Hub ...................... 49.70
NAU215 ............................. Washer ............................... 1.35
NAU229 .............. Lined Clutch Shoe (Each) ............... 25.65
NAU433 ................... Sprocket Snap Ring ..................... 1.35
NAU698 ......................... Clutch Drum ......................... 33.65
AP3019 .................... Bearing (14T- 22T) ...................... 9.00
REPLACEMENT CLUTCH SPRINGS
(Sold Each)
PART NO
COLOR / RPM
RACER NET
W3720 ............................ Brown 1800 .......................... $2.07
W3721 ............................. Black 2100 ............................ 2.07
W3722 .............................. Red 2200 .............................. 2.07
W3723 ............................. White 2700 ............................ 2.07
W3724 .............................. Blue 2900 ............................. 2.07
W3726 ............................ Purple 3000 ............................ 2.07
W3727 ............................ Green 3400 ............................ 2.20
AP1351 ......................... Orange 3600 ........................... 2.20
AP1352 .......................... Brown 3900 ............................ 2.20
AP1353 ............................ Red 4300 .............................. 2.20
113
PREMIER STINGER CLUTCHES
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
The Stinger features a one-piece, machined drum
with interchangeable drive sprockets. It also utilizes
Premier’s exclusive shoe/spring/hub “cartridge”,
allowing quick and easy set-up changes.
(4-Cycle -3/4” bore - #35 chain)
Stinger Clutch - available in 12 thru 22 teeth
PART NO.
DESCRIPTION
AP2988**
STINGER CLUTCH
•• Specify tooth size when orderinig.
RACER NET
$102.95
Stinger Springs - Racer Net $1.46 ea.
PART NO.
AP5386
AP5387
Replacement Sprockets
PART NO.
AP2989**
DESCRIPTION
#35 SPROCKET (12-18 Teeth)
RACER NET
$19.95
#35 SPROCKET (19-22 Teeth)
AP2989219** #219 SPROCKET (16-20 Teeth)
22.95
19.95
AP298941** #40/41 SPROCKET (10-11 Teeth)
•• Specify tooth size when orderinig.
19.95
Stinger Clutch Parts
REF #
1
2
3
PART NO.
AP2990
AP2991
AP2992
DESCRIPTION
REPLACEMENT DRUM
CLUTCH SHOE
CLUTCH HUB
RACER NET
$84.25
7.30
16.95
CLUTCH HUB SHAFT
53.35
4
AP2993
6
7
8
AP3019
AP2995
AP2996
AP3013
9
10
AP3014
AP3015
COVER BOLT
SPACER (OUTSIDE)
1.98
1.29
11
12
AP3016
AP3017
THRUST SPACER
OUTSIDE COVER
3.10
6.15
13
14
AP3018
AP3020
INSIDE COVER
THRUST BEARING
6.15
9.00
AP4200
AP5389
AP5324
STINGER SPECIAL CLUTCH KEY
CRANK SPACER WASHER
MOUNTING BOLT & WASHERS
3.80
3.15
1.70
AP5388
BROWN
2300
AP3006
AP3007
AP3008
BLUE
ORANGE
BLACK
2700-2900
3000-3200
3300-3500
AP3009
AP3010
YELLOW
PURPLE
3700-3900
4100-4300
AP3011
AP3012
WHITE
GREEN
4500-4700
5000-5200
PART NO.
AP2999
DESCRIPTION
BLUE CARTRIDGE
AP3000
ORANGE CARTRIDGE
AP3001
AP3002
AP3003
AP3004
AP3005
BLACK CARTRIDGE
YELLOW CARTRIDGE
PURPLE CARTRIDGE
WHITE CARTRIDGE
GREEN CARTRIDGE
SHAFT
ROTATION
(CCW)
3.
SHAFT
ROTATION
(CCW)
2.
RPM
1800
2100
Stinger Spring Cartridges - Racer Net $45.00 ea.
BEARING (14-22 TOOTH)
9.00
SNAP RING (DRUM TO HUB)
.90
SNAP RING (SPROCKET TO DRUM) .75
SNAP RING (CARTRIDGE)
.77
4.
DESCRIPTION
PINK
DARK GREEN
INBOARD
1.
5.
13.
8.
Sprockets
OUTBOARD
12.
6.
9.
10.
7.
11.
Never operate the
clutch with the
drum or snap rings
removed. Shoes may
become unattached.
14.
PREMIER MAGNUM CLUTCHES
ORDERS ONLY
ORDERS ONLY
1-800-262-0555
ALL1-800-262-0555
QUESTIONS
440-564-8100
ALL QUESTIONS
440-564-8100
This 4-cycle clutch design has been developed to
provide improved power transmission through a
stiffer, more stable drum design.
(4-Cycle -3/4” bore - #35 chain)
Magnum Clutch - available in 11 thru 17 teeth
11T - Racer Net $65.95
12T-17T - Racer Net $59.95
PART NO.
DESCRIPTION
AP5450**
AP5450**H
MAGNUM CLUTCH W/LIGHT SHOES
MAGNUM CLUTCH W/HEAVY SHOES
•• When ordering replace the (**) with the tooth size
Replacement Drums
PART NO.
DESCRIPTION
RACER NET
AP5451**
MAGNUM CLUTCH DRUM
$33.45
•• When ordering replace the (**) with the tooth size
REF #
NO.
PART
1
1
2
2
2
3
4
5
5
6
6
OPT
OPT
AP5452
AP5453
AP5454
AP5455
AP5456
AP5457
AP5458
AP5459
AP5460
AP5461
AP5462
AP5464
AP5324
PART
NO.
COLOR
DESCRIPTION
RACER
NET
Light Shoe
Heavy Shoe
Bushing (11T)
Bushing (12T)
Bearing (13T & Up)
Hub Retaining Ring
Drum Retaining Ring
Hub Assembly (11T)
Hub Assembly (12T & Up)
Steel Washer (11T)
Steel Washer (12T & Up)
Crank Spacer Washer
Mounting Bolt Kit
$9.15
9.15
2.99
7.80
9.10
.90
.90
23.65
29.80
1.99
1.29
3.15
1.70
RPM LIGHT SHOE/HEAVY SHOE
AP5465
AP5466
AP5467
AP5468
AP5469
AP5470
AP5471
AP5472
Red
2050/1750
White
2350/2000
Blue
2600/2250
Purple
3500/3000
Green
4000/3200
Orange
4400/3500
Brown
4900/3850
Hvy
5500/4700
Red
* Springs Sold each 2 required
RACER
NET
$1.99
1.99
1.99
1.99
1.99
2.25
2.25
2.25
Std Engagement Light Shoe Clutches 4000 RPM
Std Engagement Heavy Shoe Clutches 2000 RPM
115
4-CYCLE RACING CLUTCHES
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
This computer-designed centrifugal clutch is the ultimate clutch for 10 to
15 hp Briggs Animal or World Formula Engines.
It features:
• A machined drum with interchangeable sprockets for the ultimate in
strength and alignment.
• A unique hub and shoe design for maximum power transmission
• A shoe/spring/hub "cartridge" for quick and easy set-up changes
• Outboard mount, orange springs (4200 rpm) factory setup
(4 Cycle -3/4" Bore - #35 chain or #219 chain)
Premier
3/4"
Titan
Clutch
Replacement Sprockets
PART NO.
DESCRIPTION
AP2989**
#35 Sprocket (12-18 Teeth)
#35 Sprocket (19-22Teeth)
#219 Sprocket (16-20 Teeth)
#40/41 Sprocket (10-11 Teeth)
AP2989219**
AP298941**
RACER NET
$19.95
22.95
19.95
19.95
**When ordering, please add number of teeth to the part
number.
Due to the extreme conditions that clutches are
operated under there are
PART NO.
AP4317**
AP4318**
CLUTCH ASSEMBLY
#35 Chain (12T-22T)
#219 Chain (16T-20T)
RACER NET
$139.95
139.95
**When ordering, please add number of teeth to
the part number.
Replacement Springs (Sold each 3 required)
PART NO.
DESCRIPTION
AP4358
AP4359
AP4360
AP3042
AP3043
AP3044
AP3045
AP3046
Light Red (1800 RPM)
Light White (2100 RPM)
Light Blue (2400 RPM)
Blue (3100 RPM)
Green (3600 RPM)
Red (3800 RPM)
Yellow (4000 RPM)
White/Orange (4200 RPM)
RACER NET
$3.99
3.99
3.99
3.99
3.99
3.99
3.99
3.99
REF.
NO.
1
3
4
5
6
7
8
9
10
11
12
13
14
15
PART
DESCRIPTION
RACER
NO.
NET
AP4348 Yellow Cartridge kit
$53.80
(Hub, Shoes & Springs)
AP4349 White/Orange Cartridge kit
53.80
(Hub, Shoes & Springs)
AP4350 Clutch Hub
15.35
AP3019 Bearing (14T- 22T)
9.00
AP4351 Snap Ring-Drum
.90
AP4352 Clutch Key
5.00
AP4353 Thrust Spacer
3.10
AP4354 Thrust Bearing
9.00
AP4355 Hub Shaft
51.45
AP3033 Shoe (Sold each 3 Required)
7.30
AP3037 Dust Cover Bolt
1.98
AP3039 Outside Dust Cover
6.40
AP3040 Inside Dust Cover
6.40
AP3036 Snap Ring-Cartridge
1.29
AP4356 Drum
83.55
AP2996 Snap Ring Sprocket
.75
AP4357 End Play Washer
1.29
AP4884 World Formula Inboard Mounting Spacer
3.15
SMC "VORTEX CLUTCHES
VORTEX 1 DISC CLUTCH
BASE UNIT
PART NO
SMC4101**
RACER NET
$205.20
BASE UNIT
PART NO
SMC4102**
RACER NET
$230.20
BASE UNIT
PART NO
SMC4103**
RACER NET
$275.20
**PLEASE NOTE: To order a complete clutch you must order a clutch base unit and an SMC sprocket from those
listed on the opposite page.
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
SMC VORTEX CLUTCH
4-STROKE ENGINE CLUTCH 3/4" BORE
Ref# Part No.
Desc.
1
2
RETAINING RING, INNER RACE (2 REQ) $1.01
WASHER, SPROCKET .080 (2 REQ)
1.25
WASHER #35-13T & #219-16T (1 REQ)
1.25
WASHER #35-12T & #219-15T (1 REQ)
1.25
INNER RACE (1.187" LENGTH)
9.00
NEEDLE ROLLER BEARING
7.50
BUSHING (12-13T SPROCKET)
3.50
DRUM ONLY (1 DISC)
33.75
DRUM ONLY (2 DISC)
33.75
DRUM ONLY (3 DISC)
28.95
SPROCKET RETAINING RING
1.50
BUTTON HEAD CAP SCREW (6 REQ)
0.26
DRIVE PLATE (SOLD EACH)
16.00
(Use 2 w/ 1 disc, 3 w/ 2 disc & 4 w/ 3 disc)
CLUTCH DISC (SOLD EACH)
24.50
(Use 1 w/ 1 disc, 2 w/ 2 disc & 3 w/ 3 disc)
DRIVE HUB (1 DISC)
95.00
DRIVE HUB (2 DISC)
98.00
DRIVE HUB (3 DISC)
120.00
SILVER SPRING (6 REQ) (STD 1 DISC)
3.00
BLACK SPRING (6 REQ) (STD 2 & 3 DISC) 3.00
GOLD SPRING (6 REQ) (OPT 2 & 3 DISC) 3.00
GOLD SPRING KIT
20.00
BRASS WEIGHT (6 REQ)
9.60
KEY .625" LENGTH (1 DISC)
0.50
KEY .875" LENGTH (2 & 3 DISC)
0.50
SPACER (1 DISC)
4.00
SPACER (2 DISC)
4.00
CRANKSHAFT WASHER
0.60
GRADE 8 LOCKWASHER
0.26
HEX HEAD SOCKET CAP SCREW
0.75
4
6
7
8
9
SMC4013
SMC4010
SMC4023
SMC4049
SMC4011
SMC4012
SMC4020
SMC4007
SMC4033
SMC4066
SMC4037
SMC4006
SMC4003
10 SMC4002
11 SMC4001
SMC4031
SMC4065
12 SMC4004
SMC4059
SMC4068
SMC4068D
13 SMC4105
14 SMC4014
SMC4036
15 SMC4015
SMC4032
16 SMC4016
17 SMC4025
18 SMC4017
ACCESSORIES
SMC4018
SPRING WRENCH
SMC4055
T25 TORX T-HANDLE
SMC4021
REBUILD KIT (1 DISC)
(2 Drive Plates, 1 Disc, 6 Cap Screws)
SMC4034
REBUILD KIT, 2 DISC
(3 Drive Plates, 2 Discs, 6 Cap Screws)
SMC4067
REBUILD KIT (3 DISC)
(4 Drive Plates, 3 Discs, 6 Cap Screws)
SMC4024
INNER RACE KIT (1 DISC)
SMC4035
SMC4051
SMC4038
BUSHING SHORT
(#35-11T, #219-13T & 14T)
SMC4039
BUSHING LONG
#35-11T, #219-13T & 14T)
SMC4043
HARDWARE PACK (1 DISC)
SMC4045
SMC4047
Racer
Net
15.00
9.00
55.00
95.00
135.00
17.00
17.00
15.00
5.00
REPLACEMENT SPROCKETS
Ref#
Part No.
Desc.
Racer
Net
5
SMC4610**
SMC4040
SMC4611
SMC4612
SMC4613
SMC4614
SMC4615
SMC4616
SMC4617
SMC4618
SMC4619
SMC4620
SMC4621
SMC4622
SMC4623
SMC4041
SMC4713
SMC4042
SMC4714
SMC4715
SMC4716
SMC4717
SMC4718
SMC4719
SMC4720
SMC4721
SMC4722
SMC4723
SMC4724
SMC4725
SMC4726
SMC4056
SMC4057
SMC4058
10T #35 SPROCKET & BEARING
11T #35 SPROCKET ASSEMBLY
11T #35 SPROCKET
12T #35 SPROCKET & BUSHING
13T #219 SPROCKET
14T #219 SPROCKET
EXTENSION KIT (1 DISC)
19.80
29.85
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
29.85
19.80
29.85
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
13.95
13.95
13.95
** Requires use of extension kit
7.00
5.75
5.75
2.75
117
MAX TORQUE CLUTCHES
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
DRAGGIN SKIN CLUTCH
The "Draggin Skin" clutch is for avid four cycle
racers who want consistency in engagement
along with ease and flexibility in tuning the
clutch to fit their track. The engagement of the
clutch can be varied from 2,200 to 5,500 rpm by
varying spring ring combinations. A floating
spring design and a phenolic resin bonded
non-asbestos friction material with insulating
properties utilized on the shoes minimizes heat
transfer, enhancing the life of the springs.
The standard kit comes with three (3) interchangeable sprockets (13, 14, 15) as well as 4
sets of nine (9) springs each. Additional interchangeable sprockets are available up to 22
teeth. The "Draggin Skin" is supported by a
racing staff, which constantly evaluates and
improves this new product.
PART NO.
DESCRIPTION
RACER NET
DSKIT
DSKIT10
DSKIT11
DSKIT12
Clutch w/ 13, 14 & 15 Tooth #35 Sprockets
Clutch w/ 10 Tooth #35 Sprocket
$133.75
112.95
99.95
99.95
** Spring sets included with original kit
PART NO.
Clutch Retaining
Bolt Kit
PART NO.
AP5324
RACER NET
$1.70
DESCRIPTION
RACER NET
SP103435
DR1035
SP1134
DR11
SP1234
DR12
DR13
10 tooth #35 sprocket no bushing
Drum only for 10T #35 sprocket
11 tooth #35 sprocket with bushing
12 tooth sprocket with bushing
Drum only for 13T-22T #35 sprocket
$28.95
10.05
11.37
6.90
11.37
6.90
6.90
SP1334
SP1434
SP1534
SP1634
SP1734
SP1834
SP1934
SP2034
SP2134
SP2234
BUSH34
The following sprockets will fit on universal drum
Sprocket Bushing only
11.37
19.32
19.32
23.00
23.00
23.00
30.33
30.33
30.33
30.33
1.58
DS054
DS056**
DS058**
DS060**
DS062**
DS064
DS068
DS072
DSWGHT7
DSWGHT10
DSSR
DSSHB
DSSHR
DSHUB
SS34FW
SR87
SR156
SR118
SR131
SR143
Springs-all come 9 to a set
Black spring- 2,200 RPM
Red spring- 2,400 RPM
Brown spring- 2,800 RPM
Blue spring- 3,100 RPM
Green spring- 3,400 RPM
Purple spring- 3,900 RPM
Yellow or natural spring- 4,100 RPM
White spring- 4,500 RPM
7 gram weight kit
10 gram weight kit (optional)
Spring ring
Black shoes- set of three
Red shoes- set of three
Hub, sleeve, & back plate assembly
Fiber washer-3/4"
Snap ring-#87
13-22 Tooth Drum to Sprocket Snap Ring
10 tooth #35 chain drum to sprocket snap ring
5.69
5.69
5.69
5.69
5.69
5.69
5.69
5.69
5.78
5.78
5.94
44.76
25.01
27.45
.25
.35
.53
.87
.53
.53
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
MAX TORQUE CLUTCHES
Clutch Retaining
Bolt Kit
BOX STOCK CLONE CLUTCH
This clutch features a one piece drive hub and sleeve with a 1.7" long
internal built in key. A heavy duty black stainless steel spring starts to
lock at 2900 rpm and is fully locked by 3200 rpm. Also includes the
mounting bolt flat washer and lock washer. Available from 10 to 22 teeth
#35 chain, fits 3/4" shaft only.
PART
NO.
AP5290**
AP5290**
AP5290**
DESCRIPTION
10T - 11T #35 Chain Clutch Assembly
RACER
NET
$61.95
54.95
61.95
** When ordering a clutch assembly please add number of teeth to the
part number**
** All other replacement parts are the same as the SS clutch**
PART NO.
AP5324
RACER NET
$1.70
SS 6-SHOE 4-CYCLE CLUTCHES
The Max-Torque six shoe clutch is the most reliable, efficient clutch ever made.
Engagement is smooth, quick and quiet... and takes place at the peak of the
torque curve where you get the most from your engine.
Due to the extreme conditions that clutches are operated
under there are
NO EXPRESS OR IMPLIED WARRANTIES ON
CLUTCHES.
PART NO.
SHAFT SIZE
NO. TEETH
CHAIN SIZE
SS1058
SS1158
SS1258
SS1034
SS1234
SS1334
SS1434
SS1534
SS1634
SS1734
SS1834
SS1934
SS2034
SS2134
SS2234
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
10
11
12
10
12
13
14
15
16
17
18
19
20
21
22
#41
#35
#35
#41
#35
#35
#35
#35
#35
#35
#35
#35
#35
#35
#35
RACER NET
$30.95
30.95
30.95
30.95
30.95
30.95
35.95
35.95
39.95
39.95
39.95
47.95
47.95
47.95
47.95
SS & BOX STOCK CLONE REPLACEMENT PARTS - 3/4" BORE
PART NO.
SR87 ...........
SR118 .........
SR131 .........
SR131 .........
SR143 .........
SR156 .........
....................
SR125 .........
SP103435 ...
SP1034 .......
SP1134 .......
SP1234 .......
SP1334 .......
SP1434 .......
SP1534 .......
SP1634 .......
SP1734 .......
SP1834 .......
SP1934 .......
SP2034 .......
SP2134 .......
SP2234 .......
DESCRIPTION
RACER
NET
Shaft Snap Ring ............................................. $0.35
10 Tooth #35 Drum and Sprocket Snap Ring .. 0.87
13 Tooth and Up Drum and Sprocket Snap ..... 0.53
Ring
Shoe Retainer Snap Ring ................................ 0.44
10 Tooth Sprocket, No Bushing #35 Chain ... 28.59
10 Tooth Sprocket w/Bushing #41 Chain ...... 11.37
PART NO.
BUSH34 ......
SS34FW ......
DR1035 .......
DR1041 .......
DR11 ...........
DR12 ...........
DR13 ...........
SS34HSDP .
1PC34HSDP
GSXLIGHT ..
GSLIGHT ....
GSSS ..........
GSSSW .......
GS820 .........
WWSHOES .
....................
SSSHOES ...
....................
AP5277 .......
SPRING
GSXLIGHT
GSLIGHT
GSSS
GSSSW
GS820
DESCRIPTION
RACER
NET
Replacement Bronze Bushing ....................... $1.58
Fiber Washer ................................................... 0.25
10 Tooth Drum Only #35 Chain ..................... 10.05
10 Tooth Drum Only #41 Chain ....................... 6.90
13 – 22 Tooth Drum Only #35 Chain ............... 6.90
SS Hub, Sleeve & Drive Plate ....................... 17.22
Clone 1 Piece Hub, Sleeve & Drive Plate ...... 25.88
.049 Stainless Spring, Plain ............................. 6.21
.054 Stainless Spring, Blue .............................. 6.21
.056 Stainless Spring, Plain ............................. 5.42
.056 Stainless Spring, Green ........................... 6.21
.059 Stainless Spring, Black ............................ 6.21
Wedge Shoe 62 Grams ................................... 1.23 ea
(6 required / sold each)
SS Style Shoe 46 Grams ................................. 1.05ea
(6 required / sold each)
3/16" x 1/2" Key ................................................. .25
ENGAGEMENT SPEED
WEDGE SHOES / SS SHOES
1250 rpm / 1550 rpm
1650 rpm / 1850 rpm
2100 rpm / 2200 rpm
2250 rpm / 2500 rpm
2700 rpm / 3000 rpm
119
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
4-CYCLE CLUTCHES
The 400 Series has built in staying power. Almost 3 3/4 square inches of
steel friction material engagement shoe surface assures positive pulling
power as long as the RPM is in the full contact range. Available for #35 and
#40/41 chain sizes for 1" PTO shafts 8hp MAX.
WARNING: Clutch failure will result from improper final drive ratio (for every
tooth on the clutch sprocket there should be 6 teeth on the rear sprocketexample a 12 tooth #35 chain should have a 72 teeth rear sprocket and a 10
tooth #41/420 or # 40 clutch would have a 60 teeth minimum rear sprocket).
A single clutch system is only recommended for a
tire diameter of 12" and below.
A CRANKSHAFT RETAINING BOLT
(NOT INCLUDED) IS REQUIRED FOR HOLDING
THIS CLUTCH ON THE CRANKSHAFT.
Due to the extreme conditions that clutches are
operated under there are NO EXPRESS OR
IMPLIED WARRANTIES ON CLUTCHES.
PART NO.
DESC.
RACER NET
206169A
206170A
12T #35 1" Clutch Assy.
10T #40/41 1" Clutch Assy.
$73.75
73.75
NORAM 1600 Series
The NORAM 1600 Series (1" bore clutch, 1/4" keyway)
Featuring 3600 of shoe contact surface, 1600 Series clutches have been
designed for 3-15hp.
WARNING: Clutch failure will result from improper final drive ratio (for
every tooth on the clutch sprocket there should be 6 teeth on the rear
sprocket-example a 12 tooth #35 chain should have a 72 teeth rear
sprocket and a 10 tooth #41/420 or # 40 clutch would have a 60 teeth
minimum rear sprocket).
A single clutch system is only recommended for a tire diameter of 12" and
below. A CRANKSHAFT RETAINING BOLT (NOT INCLUDED) IS
REQUIRED FOR HOLDING THIS CLUTCH ON THE CRANKSHAFT.
PART NO.
DESC.
RACER NET
AP5519
10T #40/41 1" 1600 Clutch $149.95
AP5520
14T #40/41 1" 1600 Clutch 149.95
AP5521
17T #35 1" 1600 Clutch
124.80
NA01700022 Replacement Bushing
11.78
for 14 & 17T Drums
Allows use of replaceable sprockets on NORAM GE series clutches.
Uses same pattern as Premier, SMC, Bully, Tomar & Jammer
PART NO.
AP5542
AP5543
AP5544
DESC.
Stamped Clutch Drum (less washers)
Stamped Clutch Drum (w/washers)
Stamped Machiined Drum (w/washers)
RACER NET
$37.95
40.45
51.95
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
HORSTMAN CLUTCHES
HDC 1
HDC 2
1 Disc Yamaha Taper 2-Cycle Clutch
PART NO.
DESC.
RACER NET
H336000
H336001
H336002
10T #219 HDC-5A
11T #219 HDC-5A
12T #219 HDC-5A
$286.34
286.34
286.34
HDC 3
PART NO.
DESC.
RACER NET
PART NO.
DESC.
RACER NET
H336040
H336041
H336042
10T #219 HDC-5B
11T #219 HDC-5B
12T #219 HDC-5B
$295.75
295.75
295.75
H336075
H336076
H336077
H336078
H336079
H336080
10T #219 HDC-5CP
11T #219 HDC-5CP
12T #219 HDC-5CP
10T #219 HDC-5Cs
11T #219 HDC-5CS
12T #219 HDC-5CS
$330.00
330.00
330.00
330.00
330.00
330.00
REAPER
X-5
X-5
1 Disc 3/4" Bore 4-Cycle Clutch
PART NO.
H4777**
PART NO.
DESC.
RACER NET
H4900**
REAPER CLUTCH
$283.54
BASE UNIT
(LESS SPROCKET)
** For a complete clutch you must order a sprocket
seperately from the
Horstman 4-Cycle Clutch replacement parts page.
DESC.
RACER NET
X5-D 1 DISC CLUTCH
$256.69
BASE UNIT
(LESS SPROCKET)
seperately from the
PART NO.
DESC.
RACER NET
H4778**
X5-D 2 DISC CLUTCH
$274.59
BASE UNIT
(LESS SPROCKET)
seperately from the
DXL
REDHAWK
4 Disc 1" Bore 4-Cycle Clutch
PART NO.
DESC.
RACER NET
H560002
H560003
H560004
H560005
H560006
H560007
H560008
H560009
H560010
H560011
12T #35
13T #35
14T #35
15T #35
16T #35
17T #35
18T #35
19T #35
20T #35
22T #35
$313.33
313.33
313.33
313.33
313.33
313.33
313.33
313.33
313.33
313.33
PART NO.
DESC.
RACER NET
H394900
H396100
H360900
H362100
9T #35 4 SPRING
11T #219 4 SPRING
9T #35 6 SPRING
11T #219 6 SPRING
$367.20
367.20
373.98
373.98
121
H322200 ..... SPACER .105" WIDE X .665" OD ..... $3.93 .............................................. X
H322300 ..... SPACER .145" WIDE X .670" OD ...... 4.34 ... X ....... X ...... X ...... X .......
H323600 ..... SPACER .125" WIDE X .740" O.D. ..... 4.34 .............................................. X
H323800 ..... SPACER .145" WIDE x .740" O.D. ..... 4.32 ... X ....... X ...... X ...... X .......
H324600 ..... SPACER .125" WIDE X .830" ............ 4.32 .............................................. X
H325900 ..... SPACER .145" WIDE x .830" O.D. ..... 4.52 ... X ....... X ...... X ...... X .......
H300300 ..... BUSHING 9T #35, 11T#219 ............... 7.37 ... X ....... X ...... X ...... X ...... X
H300400 ..... BEARING 10T #35, 12T#219 ............ 11.01 ... X ....... X ...... X ...... X ...... X
H330132 ..... BUSHING 10T #219 (New Style) ........ 8.45 ... X ....... X ...... X ...... X ...... X
H330400 ..... BEARING, 10T #219 (Old Style) ....... 16.77 ... X ....... X ...... X ...... X .......
H336065A .. DRUM ONLY, ALUMINUM ................ 42.44 ... X ........................................
H336065S .. DRUM ONLY, STEEL ....................... 44.55 ... X ........................................
H336066A .. DRUM ONLY, ALUMINUM ................ 46.67 .............. X .............................
H336066S .. DRUM ONLY, STEEL ....................... 46.67 .............. X .............................
H336067S .. DRUM ONLY ..................................... 48.80 ........................ X ...... X .......
H336065E .. 10T#219 ALUMINUM DRUM ............ 68.94 ... X ........................................
& SPROCKET
H336065F .. 11T#219 ALUMINUM DRUM ............ 68.94 ... X ........................................
.................... & SPROCKET
H336065G .. 12T#219 ALUMINUM DRUM ............ 68.94 ... X ........................................
.................... & SPROCKET
H336065N .. 10T#219 STEEL DRUM .................... 68.94 ... X ........................................
.................... & SPROCKET
H336065P .. 11T#219 STEEL DRUM .................... 68.94 ... X ........................................
.................... & SPROCKET
H336065Q .. 12T#219 STEEL DRUM .................... 68.94 ... X ........................................
.................... & SPROCKET
H336066H .. 9T #35 ALUMINUM DRUM ............... 72.14 .............. X .............................
.................... & SPROCKET
H336066E .. 10T#219 ALUMINUM DRUM ............ 72.14 .............. X .............................
.................... & SPROCKET
H336066F .. 11T#219 ALUMINUM DRUM ............ 72.14 .............. X .............................
.................... & SPROCKET
H336066G .. 12T#219 ALUMINUM DRUM ............ 72.14 .............. X .............................
.................... & SPROCKET
H336066N .. 10T#219 STEEL DRUM .................... 70.01 .............. X .............................
.................... & SPROCKET
H336066P .. 11T#219 STEEL DRUM .................... 70.01 .............. X .............................
.................... & SPROCKET
H336066Q .. 12T#219 STEEL DRUM .................... 70.01 .............. X .............................
.................... & SPROCKET
H336068 ..... 10T #219 DRUM & SPROCKET ....... 72.62 ........................ X ...... X .......
H300900 ..... 9T #35 DRUM DXL .......................... 81.99 .............................................. X
H331000 ..... 10T #219 DRUM .............................. 76.53 .............................................. X
H331100 ..... 11T #219 DRUM .............................. 76.53 .............................................. X
H330134 ..... 9T #35 SPRKT. W/BRG & BOLTS ... 39.39 ... X ....... X ...... X ...... X ...... X
H330135 ..... 10T #35 SPRKT. W/ BRG & BOLTS 40.95 ... X ....... X ...... X ...... X ...... X
H330136 ..... 15T #35 SPRKT. W/BRG & BOLTS . 44.12 ... X ....... X ...... X ...... X ...... X
H330133 ..... 10T #219 SPRKT. W/BUSHING ....... 39.78 ... X ....... X ...... X ...... X ...... X
.................... & BOLTS
H330138 ..... 11T #219 SPRKT. W/BSH ............... 39.39 ... X ....... X ...... X ...... X ...... X
.................... & BOLTS
H330139 ..... 12T #219 SPRKT. W/BRG ............... 44.12 ... X ....... X ...... X ...... X ...... X
.................... & BOLTS
.................... & BOLTS
.................... & BOLTS
H336020 ..... DRIVE HUB (1 DISC) ........................ 81.11 ... X ........................................
H336025 ..... DRIVE HUB (2 DISC) ........................ 85.11 .............. X .............................
H336026 ..... DRIVE HUB (3 DISC) ........................ 90.15 ........................ X ...... X .......
H390800 ..... DRIVE HUB ..................................... 125.94 .............................................. X
H312200 ..... SHIM .005" THICK .............................. 2.61 .............................................. X
H312100 ..... SHIM .010" THICK .............................. 2.61 .............................................. X
CLUTCH ADJUSTING
TOOLS
For Horstman Clutches
H312000 ..... SHIM .017" THICK ............................ $2.61 .............................................. X
H336023 ..... FRICTION DISC CERAMET ............. 33.77 ... 1 ....... 2 ....... 3 ...... 3 .......
.................... ALIC STD
H334000 ..... FRICTION DISC DXL CLUTCH ........ 35.21 .............................................. 3
H336027 ..... FLOATER DISC .095" STD ............... 22.92 .............. X ....... 2 ...... 2 .......
H336028 ..... FLOATER DISC .100" ....................... 22.92 ........... OPT . OPT . OPT .....
H336029 ..... FLOATER DISC .105" ....................... 22.92 ........... OPT . OPT . OPT .....
H311000 ..... FLOATER DISC .031" ...................... 33.00 .............................................. 2
H311100 ..... FLOATER DISC .040" ....................... 32.61 ............................................ OPT
H336021 ..... PRESSURE PLATE .......................... 80.87 ... X ....... X ...... X ...... X .......
H335000 ..... PRESSURE PLATE - 4 SPRING ...... 68.43 .............................................. X
H334200 ..... PRESSURE PLATE - 6 SPRING ...... 72.35 .............................................. X
H336022 ..... LEVER SUPPORT ............................ 47.28 ... X ....... X ...... X ...... X .......
H336038 ..... SCREW 10-32 X 3/4" ........................ 47.28 ... 5 ....... 5 ....... 5 ...... 5
.................... (LEVER SUPPORT TO DRIVE HUB) ...
H335100 ..... LEVER SUPPORT (4 SPRING) ...... 100.56 .............................................. X
H334500 ..... LEVER SUPPORT (6 SPRING) ...... 103.61 .............................................. X
H334900 ..... SCREW 10-32 X 3/8" .......................... 1.41 ............................................. 4/6
.................... (LEVER SUPPORT TO DRIVE HUB) ...
H334400 ..... LEVER GUIDE WIRE ........................ 22.79 .............................................. X
H330027 ..... LEVER DOWEL PIN ........................... 0.96 ... 5 ....... 5 .............................
H336036 ..... LEVER 12.2 GRAMS ........................ 12.03 ... 5 ....... 5 .............................
H330037A .. LEVER 10 GRAM (SOLD EACH) ...... 12.35 ......................... 5 ..................
H330088 ..... 10.7 GRAM LEVER ........................... 11.76 ................................... 5 .......
H335200 ..... LEVER .068" THICK .......................... 3.65 .............................................. 8
H335300 ..... LIGHT LEVER ..................................... 3.65 .............................................. 8
H334600 ..... LEVER .070" THICK (6 Spring) ........... 5.73 .............................................. 8
H304800 ..... LONG NOSE Z-LEVER ....................... 3.45 ............................................ OPT
H305100 ..... SNUB NOSE Z-LEVER ....................... 3.69 ............................................ OPT
H3282Y ...... SPRING SET .085" WIRE HDC-5A .. 23.48 ... X ............................ X .......
H5134Y ...... SPRING .065" WIRE, SET OF 5 ....... 26.27 OPT . OPT ..........................
H3130Y ...... SPRING SET .091" WIRE ................. 26.49 .............. X ...... X ..................
.................... (SET OF 5)
H5142Y ...... SPRINGS, (BLUE) SET OF 5 ........... 25.25 ................................. OPT .....
H313000 ..... CLUTCH SPRING .091" WIRE DIA. ... 5.27 ............................................. 4/6
H313100 ..... HIGH TENSION SPRING .100" DIA. .. 5.75 ............................................ OPT
H313300 ..... DXL HIGH TENSION SPRING KIT ... 24.51 ............................................ OPT
.................... (4 SPRINGS)
H3131X ...... .102" BLUEPRINTED SPRING SET . 31.25 ............................................ OPT
H334700 ..... CLUTCH SPRING RETAINER ............ 1.37 ... 5 ....... 5 ....... 5 ...... 5 ..... 4/6
H334701 ..... CLUTCH SPRING RETAINER ............ 8.78 ............................................ OPT
.................... (SET OF 6)
H313200 ..... CLUTCH SPRING RETAINER ............ 2.15 ............................................ OPT
H334800 ..... ADJUSTING SCREW 10-32 X 3/4" .... 1.47 ... 5 ....... 5 ....... 5 ...... 5 ..... 4/6
H334801 ..... ADJUSTING SCREWS (SET OF 6) .... 2.40 ............................................ OPT
H307000 ..... BILLET OIL COVER W/BEARING .... 93.29 .............................................. X
H303800 ..... GASKET FOR DXL ............................. 3.68 .............................................. X
H303900 ..... SCREW 8-32 X 1/2" ............................ 1.29 .............................................. 8
.................... (OIL COVER TO DRUM)
H309200 ..... NUT 8-32 (OIL COVER TO DRUM) .... 0.89 .............................................. 8
H302900 ..... NUT RING (REPLACES NUTS) ........ 18.06 ............................................ OPT
H306100 ..... OIL FILL PLUG ................................... 2.93 .............................................. 2
H304200 ..... BEARING FOR OIL COVER ............. 13.73 .............................................. X
H307400 ..... BEARING RETAINING RING .............. 2.73 .............................................. X
H330125 ..... NYTRO CLUTCH OIL 1QT ............ 30.33 .............................................. X
H703600 ..... STARTER NUT ................................. 24.92 ... X ....... X ...... X ...... X ...... X
.................... (10mm X 1.25 Thread) ..........................
H309300 ..... 3mm WOODRUFF KEY YAMAHA ..... 2.84 ... X ....... X ...... X ...... X ...... X
H336061 ..... PULLER (OPTIONAL) ....................... 21.15 OPT . OPT . OPT . OPT .....
H304400 ..... PULLER (OPTIONAL) ....................... 16.29 ............................................ OPT
H336062 ..... SPANNER WRENCH (OPTIONAL) .. 21.15 OPT . OPT . OPT . OPT .....
H333100 ..... SPANNER WRENCH (6 SPRING) .... 22.64 ............................................ OPT
H333200 ..... SPANNER WRENCH (4 SPRING) .... 20.94 ............................................ OPT
H310200 ..... REBUILD KIT FOR DXL990 & 991 . 174.54 ............................................ OPT
H310300 ..... REBUILD KIT DXL1000, ................. 177.96 ............................................ OPT
.................... 2000&3000
HORSTMAN 2-CYCLE CLUTCH PULLER
(Does not fit HDC5)
FITS DXL & STEEL NYTRO
The Clutch Adjusting Tools offer the racer several
very important benefits. Using one tool the racer
is able to remove the plug, adjust the clutch and
replace the plug with great speed.
PART NO.
AP1041
AP1635
FK2226
DESCRIPTION
RACER NET
Hortsman DXL & Noram Cheetah Engine
Clutches, Wrench Sizes 3/16" x 1/8"
Hortsman Old Style Steel Nytro Engine
Hortsman New Style Steel Nytro Engine
$12.95
12.95
13.50
DXL
Racer
Net
HDC5CS
Description
HDC5CP
Part#
HDC5A
DXL
HDC5CS
Racer
Net
HDC5CP
Description
HDC5B
Part#
HDC5A
HORSTMAN 2-CYCLE CLUTCH
REPLACEMENT PARTS
HDC5B
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
PART NO.
RACER NET
AP830
$6.95
Red Hawk
X5D 2 Disc
X5D 1 Disc
Reaper
Greased Lightning
2 Disc
Greased Lightning
1 Disc
PART#
DESCRIPTION
RACER
NET
H490001..............SPACER .985 X .752 X .062 (X5D USE ON 11T ONLY) ..................................................$2.22 ..............................................X ............X ............X ............
H463000..............SNAP RING 3/4"..................................................................................................................1.50 ..............X ..............X ............X ............X ............X ............
H560050..............SNAP RING ..........................................................................................................................1.52 ..............................................................................................X
H463100..............OUTER WASHER BUSHING DRUMS ................................................................................1.91 ..............X ..............X ............................................................
H463200..............OUTER WASHER, BEARING DRUMS ................................................................................1.91 ..............X ..............X ............................................................
H490003..............WASHER 1 1/8" DIAMETER (12-13t #35, 15T #219) ........................................................1.92 ..............................................X ............X ............X ............
H490004..............WASHER 1 1/4" DIAMETER (14-23T #35, 17-23T #219) ..................................................1.92 ..............................................X ............X ............X ............
H560051..............THRUST WASHER,EXTERNAL (12T Sprockets Only)........................................................2.19 ..............................................................................................X
H560052..............THRUST WASHER,EXTERNAL (13-22T Sprockets) ..........................................................5.13 ..............................................................................................X
H300300..............BUSHING 9T#35 ..................................................................................................................7.37 ..............................................X ............X ............X ............
H300400..............BEARING 10T#35 ..............................................................................................................11.01 ..............................................X ............X ............X ............
H463600..............BRONZE BUSHING (11T #35 ) ..........................................................................................10.26 ..............................................X ............X ............X ............
H463400..............BRONZE BUSHING (12-13T #35 15T #219) ....................................................................12.38 ..............X ..............X ............X ............X ............X ............
H463500..............NEEDLE BEARING (14-23T #35, 17-23T #219)................................................................12.99 ..............X ..............X ............X ............X ............X ............
H560053..............BUSHING (12T Sprockets Only) ..........................................................................................5.48 ..............................................................................................X
H560054..............BEARING (13-22t Sprockets) ..............................................................................................7.29 ..............................................................................................X
H482260..............BASKET ONLY ONLY ........................................................................................................41.12 ..............X ................ ............................................................
H480076..............BASKET ONLY (ALUMINUM) ............................................................................................49.43 ................................X ............................................................
H480144..............BASKET ONLY (STEEL) ....................................................................................................49.04 ................................X ............................................................
H490019..............BILLET STEEL DRUM ONLY (LESS SPROCKET)............................................................58.94 ..............................................X ............................................
H490007..............CLIPS-FITS OLD STYLE ALUM DRUM (SET OF 3) ..........................................................7.29 ..............................................X ............................................
H312901..............SCREW - FOR DRUM CLIPS ( SET OF 4) ........................................................................1.53 ..............................................X ............................................
H477702..............BILLET STEEL DRUM ONLY (LESS SPROCKET)............................................................39.47 ..............................................................X ............................
H477880..............BILLET STEEL DRUM ONLY (LESS SPROCKET)............................................................40.01 ..............................................................................X ............
H560068..............DRUM ONLY, LESS SPROCKET ......................................................................................87.38 ..............................................................................................X
H480056..............12T #35 SPROCKET KIT ..................................................................................................34.26 ............OPT..........OPT ..........................................................
H480069..............15T #219 SPROCKET KIT ................................................................................................34.26 ............OPT..........OPT ..........................................................
H480075..............RETAINING RING FOR SPROCKET ..................................................................................1.14 ..............X ..............X ............................................................
H490049..............9T #35 SPROCKET KIT (MUST USE WITH ARENA MT KIT & 11T CLUTCH) ................35.75 ............................................OPT ........OPT ........OPT ..........
H490050..............10T #35 SPROCKET KIT (MUST USE WITH ARENA MT KIT & 11T CLUTCH)..............35.75 ............................................OPT ........OPT ........OPT ..........
H490051..............11T #35 SPROCKET KIT (WILL NOT FIT 12-23T CLUTCHES)........................................35.75 ............................................OPT ........OPT ........OPT ..........
H490052..............12T #35 SPROCKET KIT ..................................................................................................35.75 ............................................OPT ........OPT ........OPT ..........
H490064..............15T #219 SPROCKET KIT ................................................................................................35.75 ............................................OPT ........OPT ........OPT ..........
H477701..............10-32 BUTTON HEAD SCREW (REAPER & X5D SPROCKET) ........................................0.30 ..............................................4 ............4 ............4..............
H560055..............SPROCKET 12T #35 W/BUSHING ....................................................................................35.36............................................................................................OPT
H560056..............SPROCKET 13T #35 W/BEARING ....................................................................................36.06............................................................................................OPT
H560084..............BUTTON HEAD SCREW (Sprocket Retaining)....................................................................0.36 ..............................................................................................4
H480077..............THRUST BEARING KIT ......................................................................................................8.48 ..............X ..............X ............................................................
H480078..............THRUST WASHER ..............................................................................................................1.77 ..............2 ..............2 ............................X ............X ............
H480079..............THRUST BEARING (12T-23T CLUTCH ..............................................................................4.95 ..............X ..............X ............X ............X ............X ............
H490028..............THRUST WASHER 12T-23T CLUTCH ................................................................................2.12 ..............................................X ............................................
H490035..............THRUST WASHER 9T, 10T & 11T #35 CLUTCH ................................................................2.22 ..............................................X ............X ............X ............
H490036..............THRUST BEARING 9T, 10T & 11T #35 CLUTCH................................................................6.65 ..............................................X ............X ............X ............
H490005..............SPACER 11T #35 CLUTCH ONLY ......................................................................................6.56 ..............................................X ............................................
H490025..............SPACER 12T-23T CLUTCH ................................................................................................6.06 ..............................................X ............................................
H482261..............DRIVE HUB/W FRONT PLATE AND BOLTS. ................................................................106.83 ..............X ................ ............................................................
H482262..............FRONT PLATE ONLY ........................................................................................................32.88 ..............X ................ ............................................................
H480081..............DRIVE HUB LIGHTNING CLUTCH..................................................................................105.81 ................................X ............................................................
H490037..............DRIVE HUB (11T #35)........................................................................................................88.46 ..............................................X ............................................
H490016..............DRIVE HUB (12T-23T) ....................................................................................................103.19 ..............................................X ............................................
H490014..............FIXED PLATE ....................................................................................................................58.94 ..............................................X ............................................
H490026..............SCREW - FLAT HEAD (SET OF 6) ......................................................................................2.69 ..............................................X ............................................
H477725..............DRIVE HUB, FITS 9T, 10T & 11T ......................................................................................84.77 ..............................................................X ............................
Reaper
Greased Lightning
2 Disc
Greased Lightning
1 Disc
PART#
DESCRIPTION
RACER
NET
H477726..............DRIVE HUB FITS 12T-23T ..............................................................................................$91.85 ..............................................................X ............................
H477882..............DRIVE HUB FITS 9T, 10T & 11T ......................................................................................70.67 ..............................................................................X ............
H477883..............DRIVE HUB FITS 12-23T ..................................................................................................91.85 ..............................................................................X ............
H560081..............DRIVE HUB 1" BORE ......................................................................................................123.78 ..............................................................................................X
H560080..............FRONT PLATE ..................................................................................................................46.62 ..............................................................................................X
H480082..............FRICTION DISK STD. LIGHTNING ..................................................................................25.86 ..............1 ..............2 ............................................................
H490015..............FRICTION DISC ................................................................................................................33.21 ..............................................2..............................................
H477729..............FRICTION DISC CERAMETALLIC ....................................................................................33.26 ..............................................................1 ............2..............
H560082..............FRICTION DISC ................................................................................................................36.02 ..............................................................................................4
H464100..............FLOATER DISC .075" THICK............................................................................................25.89..............................OPT ..........................................................
H464200..............FLOATER DISC .085" THICK (STD. ..................................................................................25.89 ................................X ............................................................
H464500..............FLOATER DISK .065" ........................................................................................................25.89..............................OPT ..........................................................
H490020..............FLOATER .065" THICK ....................................................................................................25.02 ............................................OPT ..........................................
H490013..............FLOATER .085" THICK ......................................................................................................25.02 ..............................................X ............................................
H490021..............FLOATER .075" THICK ......................................................................................................25.02 ............................................OPT ..........................................
H490022..............FLOATER .095" THICK ......................................................................................................25.02 ............................................OPT ..........................................
H490023..............FLOATER .105" THICK ....................................................................................................25.02 ............................................OPT ..........................................
H477885...............085" FLOATER DISC STD ................................................................................................21.15 ..............................................................................X ............
H477886...............075" FLOATER DISC ........................................................................................................21.15 ............................................................................OPT ..........
H477887...............095" FLOATER DISC ........................................................................................................21.15 ............................................................................OPT ..........
H560083..............FLOATER,STANDARD SIZE ..............................................................................................29.13 ..............................................................................................3
H560090..............FLOATER, HEAVY DUTY ..................................................................................................29.13............................................................................................OPT
H335000..............PRESSURE PLATE ............................................................................................................68.43 ..............X ................ ............................................................
H480084..............PRESSURE PLATE ............................................................................................................73.37 ................................X ............................................................
H490012..............PRESSURE PLATE ............................................................................................................88.46 ..............................................X ............................................
H477727..............PRESSURE PLATE ............................................................................................................80.99 ..............................................................X ............X ............
H560085..............PRESSURE PLATE ............................................................................................................87.51 ..............................................................................................X
H444700..............ALUM. LEVER SUPPORT..................................................................................................81.96 ..............X ..............................................................................
H334400..............WEIGHT GUIDE WIRE ......................................................................................................22.79 ..............X ..............................................................................
H480088..............LEVER SUPPORT, LIGHTNING ........................................................................................81.83 ................................X ............................................................
H490011 ..............LEVER SUPPORT..............................................................................................................90.90 ..............................................X ............................................
H477898..............LEVER SUPPORT..............................................................................................................52.01 ..............................................................X ............X ............
H560086..............LEVER SUPPORT..............................................................................................................84.50 ..............................................................................................X
H482264..............SCREW 10-32 X 5/8" (LEVER SUPPORT TO DRIVE HUB) ............................................0.36 ..............8 ............................................................................6
H334900..............SCREW 10-32 X 3/8" (LEVER SUPPORT TO DRIVE HUB) ..............................................1.41 ................................8 ............................................................
H490032..............SCREW (LEVER SUPPORT TO DRIVE HUB) (SET OF 6) ................................................2.67 ..............................................X ............................................
H477734..............SCREW 1/4-28 X 3/4" (LEVER SUPPORT TO DRIVE HUB) ..............................................1.25 ..............................................................5 ............5..............
H560087..............SCREW (LEVER SUPPORT TO DRIVE HUB) ....................................................................1.58 ..............................................................................................6
H113500 ..............LEVER ..................................................................................................................................6.27 ..............8 ..............................................................................
H305100..............SNUB NOSE Z-LEVER ........................................................................................................3.69 ..............8 ..............................................................................
H480085..............LEVER (ONLY) ..................................................................................................................11.30 ................................6............................................................6
H490008..............LEVER ..................................................................................................................................8.87 ..............................................6..............................................
H477896..............JUMBO LEVER ..................................................................................................................10.97 ..............................................................5 ............5..............
H480086..............DOWEL PIN (EACH) ..........................................................................................................0.86 ................................6............................................................6
H490038..............DOWEL PINS (SET OF 6)....................................................................................................6.11 ..............................................X ............................................
H477897..............DOWELL PIN........................................................................................................................1.46 ..............................................................5 ............5..............
H480087..............WEIGHT KIT ........................................................................................................................8.48 ................................X ............................................................
H480141..............BRASS WEIGHT KIT..........................................................................................................41.04..............................OPT .......... ............................................
H490039..............WEIGHT KIT ........................................................................................................................9.57 ..............................................X ............................................
H480140..............BRASS WEIGHTS (SET OF 6 ) ........................................................................................12.78 ..............................................X ............................................
H477732D ..........WEIGHT KIT (X5D ONLY)....................................................................................................9.20 ..............................................................X ............X ............
H560093..............BRASS WEIGHT (SET OF 12) ..........................................................................................44.09 ..............................................................................................X
H482264..............SCREW 10-32 X 5/8" - WEIGHT..........................................................................................0.36 ..............................................................................................6
H560094..............FLAT WASHER 1/4" ............................................................................................................1.07 ..............................................................................................6
H560095..............LOCK NUT............................................................................................................................0.25 ..............................................................................................6
H465000..............SPRING - .085" WIRE DIA. ................................................................................................5.55 ..............4 ..............6............................................................6
H514200..............SPRING BLUE .075" (EACH) ..............................................................................................4.33 ............OPT..........OPT ......................................................OPT
H464900..............SPRING - .091" WIRE DIA. ................................................................................................5.27..............................OPT ......................................................OPT
H4649X ..............SPRING RED .091" (SET OF 6) ........................................................................................29.46..............................OPT..........X..........................................OPT
H4650X ..............SPRING BLACK .085 (SET OF 6) ....................................................................................24.51 ................................X..........OPT ......................................OPT
H5142X ..............SPRING BLUE .075" (SET OF 6)......................................................................................27.46 ............................................OPT ......................................OPT
H4650Y ..............SPRING, BLACK MED TENSION (SET OF 5) ..................................................................24.51 ..............................................................X ............X ............
H3130Y ..............SPRING SET .091" WIRE (SET OF 5) ..............................................................................26.49 ............................................................OPT ........OPT ..........
H5142Y ..............SPRINGS, (BLUE) SET OF 5 ............................................................................................25.25 ............................................................OPT ........OPT ..........
H334700..............CLUTCH SPRING RETAINER ............................................................................................1.37 ..............4 ..............6 ............................5 ............5 ............6
H334701..............RETAINER (SET OF 6) ........................................................................................................8.78..............................OPT..........X ............................................
H334800..............ADJUSTING SCREW 10-32 X 3/4" ....................................................................................1.47 ..............4 ..............6 ............................5 ............5 ............6
H334801..............STALL SPEED ADJUSTING SCREWS (SET OF 6) ............................................................2.40..............................OPT..........X ............................................
H465100..............CLUTCH KEY ......................................................................................................................1.83 ..............X ..............X ............................X ............X ............
H490029..............CLUTCH KEY ......................................................................................................................3.09 ..............................................X ............................................
H560091..............CLUTCH KEY ......................................................................................................................1.44 ..............................................................................................X
H477738..............SPACER ..............................................................................................................................4.95 ..............................................................X ............X ............
H560096..............SPACER ..............................................................................................................................2.94 ..............................................................................................X
H465200..............WASHER, 5/16" I.D. X 1" O.D. ............................................................................................0.90 ..............X ..............X ............................X ............X ............
H490031..............STEP WASHER....................................................................................................................2.88 ..............................................X ............................................
H560089..............WASHER/ FLAT 3/8" ............................................................................................................0.25 ..............................................................................................X
H465500..............LOCK WASHER ..................................................................................................................0.96 ..............X ..............X ............X ............X ............X ............
H560092..............WASHER/ LOCK 3/8" ..........................................................................................................0.25 ..............................................................................................X
H465300..............RETAINING BOLT, 5/16 - 24 X 3/4" ....................................................................................0.96 ..............X ..............X ............X ............X ............X ............
H560088..............RETAINING BOLT 3/8-24 X 2" ............................................................................................0.80 ..............................................................................................X
H480099..............OUTBOARD SPACER KIT ................................................................................................15.87..............................OPT ..........................................................
H490045..............OUTBOARD MOUNTING KIT ............................................................................................19.1 ..............................................OPT ..........................................
H477889..............OUTBOARD SPACER KIT ................................................................................................15.87 ............................................................OPT ........OPT ..........
H490047..............9T & 10T SPROCKET MTG KIT (MUST USE W/11T CLUTCH) ......................................42.21 ............................................OPT ..........................................
H477772..............9T & 10T SPROCKET MTG KIT (MUST USE W/11T CLUTCH) ......................................41.73 ............................................................OPT ........OPT ..........
H462700..............BOLT 5/16-24 X 1-1/2" (9 & 10T Arena Clutches Only) ......................................................1.47 ............................................................OPT ........OPT ..........
H490044..............SPANNER WRENCH..........................................................................................................22.05 ............................................OPT ..........................................
H477735..............SPANNER WRENCH..........................................................................................................18.32 ............................................................OPT ........OPT ..........
H490046..............REBUILD KIT ....................................................................................................................117.96 ............................................OPT ..........................................
X5D 1 Disc
HORSTMAN 4-CYCLE CLUTCH REPLACEMENT PARTS
X5D 2 Disc
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
Red Hawk
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
123
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
RLV PIPES
RLV L-SERIES YAMAHA & PISTON VALVE PIPES
These pipes conform to and meet all standards for pipe manufacturing as prescribed by the WKA, the IKF and KART. The L2 pipe is designed to be the all purpose pipe for the beginner or
expert. Its primary design is for sprint racing however, due to
it's outstanding power curve the L-2 is well suited, like the old
A-2 for use in all applications. The L-2 offers unmatched low
end with improved mid range and as with all RLV pipes great top
end. The L-4 pipe has peak power and is a narrow range pipe
that is best suited for very fast circuits with minimal clutch use
and few slow corners. The L-4 will work well on high speed
sprint tracks, street racing and is a must for road race, sprint situp and dirt racing.
PART NO.
DESCRIPTION
APPLICATION
RACER NET
RLV7361 ............. L-2 Pipe Kit with 12 Deg. Header, Flex & Springs .................... Standard Range ................................................. $194.99
RLV7362 ............. L-2 Pipe Kit with 12 Deg. Header, Flex & Springs ......................... More Low ........................................................ 194.99
RLV7363 ............. L-2 Pipe Kit with Straight Header, Flex & Springs .................... Standard Range ................................................... 194.99
RLV7364 ............. L-2 Pipe Kit with Straight Header, Flex & Springs ......................... More Low ........................................................ 194.99
L-Series Pipe Only
RLV7360 ............. L-2 Pipe only .......................................................... Wide Range / Yamaha and Piston Valve ................................ 149.99
RLV7370 ............. L-4 Pipe only ........................................................ Narrow Range / Yamaha and Piston Valve .............................. 149.99
Note: Above pipes receive 1 3/4" flex only.
L-Series Headers Only
RLV9190 ............. Yamaha .................................................................... 12 Deg. Tapered Header / More Low ..................................... 45.35
RLV9192 ............. Yamaha .............................................................. 12 Deg. Tapered Header / Standard Range ................................ 45.35
RLV9194 ............. Yamaha .................................................................... Straight Tapered Header / More Low ..................................... 45.35
G1088 ............................................................................................................... Copper Exhaust Gasket ................................................. 3.38
8A714613-00-00 ............................................................................................... Factory Exhaust Gasket ................................................. 8.09
RLV BOX MUFFLERS & ACCESSORIES
SSX
RLV Sportsman Muffler (YBX), Super Sportsman (SSX)
are designed to reduce speed and the general
complexity that faces the new karter. The Super
Sportsman for Yamaha completes a ladder approach
from Senior Sportsman to Super Sportsman and
eventually open pipe. Note: All RLV Box Mufflers are to
be run as manufactured by RLV, any tampering will result
in disqualification.
YBX
••US Patent #373,561
•US Patent #373,983
PART NO.
DESCRIPTION
APPLICATION
RACER NET
RLV7500 ............. Yamaha Box muffler YBX, 3 hole, Junior and Senior Sportsman•• ......................................................................... $73.58
RLV7540 ............. Yamaha SSX Road Race, 4 hole, holes up• ............................................................................................................. 81.83
RLV7541 ............. Yamaha SSX Road Race, 4 holes fom 9 to 12 o'clock, can in 100 left hand engine ................................................. 81.83
RLV7543 ............. Yamaha SSX Road Race, 4 holes fom 12 to 3 o'clock, can in 100 right hand engine ............................................... 81.83
RLV7548 ............. Yamaha SSXV all venues, 4 holes, 900 apart ........................................................................................................... 81.83
RLV7514 ............. YBX replacement end cap (3 holes in cap) ............................................................................................................... 13.23
RLV7516 ............. SSX replacement end cap ......................................................................................................................................... 13.23
RLV7560 ............. Replacement screws for end cap (10-pack) ................................................................................................................ 2.64
G1088 ............................................................................................................... Copper Exhaust Gasket ................................................. 3.38
8A714613-00-00 ............................................................................................... Factory Exhaust Gasket ................................................. 8.09
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
EXHAUST SYSTEM ACCES.
RLV Pro Light Pipe Mounting System
RLV Pro Light Pipe Mount System features an all new high tech design that is flashy, stylish and attractive. The ProLite Pipe Mount System also offers durability and ease of use at a modest price.
PART NO.
RLV0542
RLV1298
RLV0550
RLV1195
RLV1590
DESCRIPTION
RACER NET
3/4" & 20mm complete mount (w.std. springs)
$43.97
3/4" & 20mm clamp block (w/swivel only)
24.06
Pipe cradle assy. (w/springs, bolt, washer, nut)
14.90
Pipe cradle only
7.38
Cradle spring, double loop (w/std. spring) sold each
1.76
EXHAUST SPRINGS
MTE SPRING
TOOL
HEAVY DUTY SPRING
PULLER
Heat resistant, easy to use. Holds
expansion chambers to headers or
elbows but absorbs vibration problems.
PART NO.
RACER NET
PART NO.
AP5382
$14.96
S124
S125
S126
EXHAUST SPRING TOOL
The "C" shaped tip fits the
bend in the spring end and
won't slip. Can be used to
install and remove springs
on anything!
DESCRIPTION
RACER NET
2" length, Sold Each
$.75
.92
1.00
PART NO.
RACER NET
W4753
$10.79
HEADER PIPE TUBING FOR TWO CYCLES
Quality steel tubing for connecting header to your expansion chamber.
Sold in one foot lengths, 1.75 inch O.D. and .050 wall
PART NO.
DESCRIPTION
RACER NET
G1725
Header Tubing, One Foot
$3.74
RLV Exhaust Springs (header to pipe)
Pliers slip and end cutters usually damage the
spring. Exhaust springs are a problem. With its
sturdy spring hook and padded T-handle, the
G.E.M. spring tool is the answer.
PART NO.
RACER NET
G4618
$6.59
RLV Exhaust Springs feature large diameter coils, large loops and plating for an
extended service life. These are not hardware or outlet springs. These are high
quality fasteners.
PART NO.
RLV0560
RLV0564
RLV0570
RLV0572
RLV0554
DESCRIPTION
Exhaust spring 1" - 10 per pack
Exhaust spring 1 3/8" - 10 per pack
Exhaust spring 3 1/2" (double loop) - 10 per pack
RACER NET
$8.73
8.73
10.58
15.69
17.55
125
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
FUEL LINE & ACCESSORIES
FUEL FILTER
TYGON FUEL LINE
Part No.
Description
Racer Net
AP4530
PART NO.
AP5267
DESC.
1/4" ID X 3/8" OD
1.175” OD x
$5.09
1.750’ Long
(Fits 6mm, 1/4” & 8mm ID Fuel Line)
RACER NET
$1.59
(per foot)
CLEAR BODY
WALBRO TYPE IN-LINE FILTER
“SNAPPER-CLAMPER”
A greatly improved filter with a larger fuel flow capacity. (Replace
Walbro 125 - 512)
The hot set-up in fuel line clamps.
Adjustable, reusable and won't slip.
PART NO.
PART NO.
RACER NET
G4482 (sold each)
$.76
W2901
AP4684
DESCRIPTION
RACER NET
Walbro Type In-Line Filter
Original Walbro Fuel Filter
$1.89
3.25
NYLON FUEL FILTER (INLINE)
Fuel passes through this filter with less restriction than it encounters with other types of filter media, such as: paper, wire cloth, or
porous metals, because of the smooth surface of the nylon
mesh.
Check these features: All nylon construction, Low cost, Corrosion resistant, Self Cleaning.
PART NO.
W1138
W1139
DESCRIPTION
RACER NET
3 1/2" for 1/4" I.D. Fuel Line
$1.69
Nylon fuel filter 2" for 1/4" Fuel Line 1.29
CHECK VALVE
FUEL LINE ADAPTER KIT
This enduro check
valve was designed
specifically to
transfer fuel without
failing. Available for
1/4" I.D. fuel line.
This kit fits into a 3/8" hole drilled in the existing cap, and is secured with
two threaded seal plates. No gaskets needed when properly installed.
PART NO.
W3810
DESCRIPTION
RACER NET
Check valve 1/4"
$9.71
PART NO.
AZ1817
AZ8333
AZ8330
DESCRIPTION
Fuel Adapter Kit
Seal Plate (2 required)
Straight Fitting
RACER NET
$2.21
.64
1.09
FUEL LINE, FUNNELS & ACCES.
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
QUALITY TANK FITTINGS AT BARGAIN PRICES
PART NO.
DESCRIPTION
AZ8334
AZ8335
AZ8336
Outlet valve, single with filter
Plug, 1/8"
Outlet valve, single w/out filter
RACER NET
$5.21
.25
4.73
COLORED
FUEL LINE
PART NO.
AZ8330
AZ8342
AZ8338
AZ8339
DESCRIPTION
Outlet fitting, 1/8"
Elbow fitting, 90°
“T” fitting, three way (Nylon)
“Y” fitting, three way (Nylon)
RACER NET
$1.09
1.77
1.20
1.20
E-Z POUR 1 GALLON JUG
(Order per Foot)
1/4" I.D. X 3/8" O.D.
PART NO.
W3743
AP1811
AP1812
AP1813
AP1982
AP2233
AP4584
AP4586
PART NO.
AP4875
COLOR
RACER NET
Orange
$.57/foot
Red
.49/foot
Yellow
.49/foot
Blue
.49/foot
Clear
.49/foot
Purple
.49/foot
3/16" I.D. x 3/8" O.D.
.69foot
Clear Fuel Line
1/4" to 3/16" Reducer fitting .71
WARNING: Not for use for
Fuel Storage or Transportation
PLASTIC IN-LINE
FUEL SHUT OFF
VALVE
PART NO.
AP4566
DESCRIPTION
Plastic in-line fuel shut off
valve. Fits 1/4" I.D. fuel line.
RACER NET
$3.62
OUTERWEARS FUEL FUNNEL
PRE-FILTER
Outerwears Pre-Filter Fuel Filter is
manufactured from the same durable
polyester material as the Outerwears Pre-Filter
and will sift out even more particles than stock
screen that comes with a fuel funnel. Stops
gas can rust, sand, dirt, or other debris before
it has a chance to clog the fuel filter. The most
unique feature of this funnel pre-filter is, that
once saturated with gasoline it will not let water
that has gotten into your gas can, through to
your tank.
PART NO.
4MCFF2825T
4MFF2825T
4MCFF22T
4MFF22T
DESCRIPTION
Fuel funnel with pre-filter 6 qt.
Pre-Filter Only 6 qt.
Fuel funnel with pre-filter 2 qt.
Pre-Filter Only 2 qt.
RACER NET
$14.95
1/4 TURN FUEL VALVE
Rugged nylon is nonreactive to
fuel and noncorrosive for longlife. Valves open and close easily
with a quarter turn of the spindle.
Tank mounting: 1/8" standard pipe
thread.
PART NO.
AP1265
RACER NET
$2.30
RATIO RITE
Ratio Rite is the great new answer to the
problem of mixing correct oil and gas ratios for
any 2-cycle engine!
Handy new measuring cup eliminates
guessing and errors in ratios from 16:1 to 50:1
for 1.0 to 2.5 gallons, and multiples thereof.
RACER NET
$14.96
11.21
13.46
8.96
AP2018
Lid only
$1.99
W1469
Cup only
4.75
127
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
ALUMINUM FUEL TANKS
PART NO.
DESC
RACER NET
AP2930
6 QT
$82.50
(9" L X 7 3/8" W X 7 3/4" T)
PART NO.
DESC
RACER NET
AP554
6 QT
$82.50
(11" L X 4 7/8" W X 8 3/4" T)
PART NO.
DESC
RACER NET
AP1604
2 QT
$75.00
(9" L X 2 1/2" W X 7 3/4" T)
ALUMINUM 3 QT.
FUEL TANK (Floor Mount)
5 3/4” Long x 6 5/8” High x 4 7/8” Wide
ALUMINUM SUMP
TANK
3 5/8" long x 2 3/4" wide x 4" high
PART NO.
DESC
RACER NET
AP1603
4 QT
$75.00
(9" L X 5" W X 7 3/4" T)
AP4225
5 QT
75.00
(9"L X 6-1/8" W X 7-3/4" T)
PART NO.
AP4227
PART NO.
AP4226
RACER NET
$75.00
RACER NET
$55.50
ALUMINUM 4 QT.
FUEL TANK (Seat Mount)
7 7/8” Wide x 10 1/8” Tall x 3” Deep
PART NO.
DESC
RACER NET
CB421A MOUNTING KIT
$4.47
PART NO.
AP555
PART NO.
AP4228
RACER NET
$75.00
PART NO.
AP5121
AP5108
DESC
REPL. CAP
RACER NET
$4.95
DESC
RACER NET
2.5 QT LOW PROFILE
$82.50
(8" L X 4 3/4" W X 5 1/4" T)
4 QT LOW PROFILE
82.50
(8" L X 7 1/2" W X 5 1/4" T)
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
PLASTIC FUEL TANKS
PART NO.
DESC
RACER NET
AP5013
2 QT
$22.95
(3 7/8" W x 7 1/2" L x 5 1/4" T)
PART NO.
DESC
RACER NET
AP5014
4 QT
$24.95
(6 1/2" W x 9 1/4" L x 6 1/4" T)
PART NO.
DESC
RACER NET
AP5015
5 QT
$25.95
(6 1/2" W x 9 1/4" L x 8 1/4" T)
7 QT. FLOOR MOUNT FUEL TANK
PART NO.
DESC
RACER NET
AP1266 7" W x 10" L x 8" T $26.95
8.5 LITER CIK
FUEL
TANK-QUICK
RELEASE
PART NO.
52142
52158
52155
52156
DESCRIPTION
8.5 Liter CIK Fuel
Tank-Quick Release
Mount kit
Replacement Fuel Cap
Replacement Fuel Pick-up
Assembly
RACER NET
$53.92
$12.36
1.85
15.81
VERTICAL MOUNT TANKS
PART NO.
DESC
AP5568
3 QT. Steering Post Mount Fuel Tank
No leak top pick up (mounting hardware included)
RACER NET
$35.95
Replacement Tank Parts (fits AP1266, AP5013, AP5014, AP5015 & AP5568)
PART NO.
AP555
AP5569
DESC
Fuel Cap
Fuel Pick-up
RACER NET
4.95
8.95
129
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
CARB ACCESSORIES
Attaches ball end cables to throttle
rod. Adaptor fits 1/4 - 28 threaded
rods. Does not include cable, rod or
jam nut. These are shown for
illustration only.
Part No.
AP5301
Racer Net
$6.95
CABLE GUARD
Racer
Net
$2.95
2 pc Throttle
Clevis
Part No.
Part No.
AP4688
Throttle
Linkage Arm
Throttle
Spring/Clevis
Throttle Rod
Cable Connector
AP5322
SURE-GRIP
CABLE ANCHOR
Racer
Net
$4.95
ADJUSTABLE
THROTTLE
ARM ASSEMBLY
Efficient
hook
up
for
carburetors. Set screw provides
positive cable locking & adjustment. Complete with stainless
steel cotter pin, set screw.
Part No.
G1342
Racer Net
$5.15
QUICK RELEASE
Brass sleeve to protect cable
damage by set screws, etc.
Plastic Box with 25 pieces.
PART NO.
G1340
RACER NET
The sure-grip cable stop will
save your cable while improving a sure stop.
Uniform clamping won't
distort or destroy cable and
can easily be readjusted.
$6.17
PART NO.
G1389
RACER NET
$1.95
Economical high quality
reliable adjustable throttle
arm/swivel assembly. Will fit
most popular carb shafts
with positive grip yet easily
adjustable for angle and
cable travel.
PART NO. RACER NET
G1357
$7.08
CABLE HOUSING
ANCHOR
You can disconnect your throttle
cable easy enough. With our
Quick-Release Cable Housing
Anchor, you simply push down
on the manual release button
and your cable housing is free.
Replaces standard three piece
brass fitting.
PART NO.
RACER NET
G1693
REMOTE
CARB ADJUSTER
Fine tune for maximum horsepower without
having to fumble for the needles in heavy traffic.
Precision machined from aluminum, 4' 4" cable
and all hardware weighs only 8 ounces. Mounts
easily to most carburetors, tunes on a one to
one ratio.
PART NO.
AP574
AP574B
DESCRIPTION RACER NET
Walbro & Tillotson
Stock Briggs
$6.11
CABLE TIES - 4", 7" & 11"
PART NO.
AP1827**
AP1828**
AP1829**
DESCRIPTION
4" Cable Ties (Pack of 100)
RACER NET
$3.95
$4.95
$5.95
** Please add a color from the list below to the end of the Part No. when ordering:
BK=Black, BL=Blue, G=Green, N=Natural, O=Orange, R=Red, Y=Yellow
$40.76
40.76
FUEL PUMPS & CARB ACCESS.
MIKUNI
FUEL PUMP
SINGLE OUTLET
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
MIKUNI
FUEL PUMP
DUAL OUTLET
PART NO.
DESCRIPTION
W4843
W2889
AP1415
Fuel Pump
Repair Kit
OEM Repair Kit
RACER NET
$18.00
5.20
7.50
PART NO.
DESCRIPTION
W1468
W1756
AP1414
Fuel Pump
Repair Kit
OEM Repair Kit
RACER NET
$23.95
5.20
10.50
BRIGGS OEM FUEL PUMP
WALBRO HIGH VOLUME
FUEL PUMP
PART NO.
DESCRIPTION
808656
Briggs OEM Fuel Pump
RACER NET
$22.47
FUEL LINE REDUCER FITTING
Works great with Clone engines
PART NO.
AP5594
AP5595
DESCRIPTION
RACER NET
Walbro High Volume Fuel Pump
Rebuild Kit
$17.99
9.23
PART NO.
AP4586
YAMAHA CABLE
HOUSING BRACKET
FLEX-T
Low speed Jet for Yamaha
Tune While You Race
PART NO.
W3567
DESCRIPTION
1/4" I.D. fuel line to 3/16" I.D. fuel line
RACER NET
$6.95
Our assembly simply replaces the original
Yamaha part but has a reliable brass compression fitting for positive housing anchor.
PART NO. DESCRIPTION
RACER NET
G1360 Cable Housing Anchor Assembly
$9.60
RACER NET
$.71
YAMAHA CARB
CABLE ANCHOR
Replaces stock Yamaha carb cable anchor.
Allows use of standard types of cables
PART NO.
G1358
RACER NET
$5.87
131
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
CABLES, FITTINGS & CLIPS
CABLES W/HOUSING
INNER CABLES ONLY
PART
LENGTH I/O
END
RACER
NO.
NET
W1060
56"/48"
BALL & BARREL**
$3.25
W1062
65"/60"
BALL & BARREL**
3.50
W1063
55"/60"
BALL & LG BARREL**
3.95
233B
80"/72"
BALL
3.95
AP2092 100"/90"
BALL & BARREL**
5.26
**Remove end not needed
PART LENGTH I/O
END
RACER NET
NO.
AP4686
54"
BALL
$2.59
AP4687
72"
BALL
2.59
AP4685
96"
BALL
2.95
AP4070
72"
SM BARREL **
2.07
AZ8307A NYLON OUTER HOUSING
.25 per ft
** FITS “ANIMAL” & “WORLD FORMULA” ONLY
BRAKE CABLES
PART
DESC.
RACER
NO.
NET
AP5272 34" Inner x 30" Outer $6.95
AP5273 56" Inner x 51 1/4" Outer $6.42
FITTINGS AND CLIPS
WIRE STOPS-PACKAGE OF 10
O.D.
I.D. LENGTH FOR CABLE PART NO. RACER NET
14"hex 6-32
3/8"
1/16 - 5/64 AZ2360
$4.88
WIRE SWIVELS-PACKAGE OF 10
O.D
I.D. LENGTH FOR CABLE PART NO. RACER NET
1/4"shk.6-32
.240"
1/16 - 5/64 AZ2361
$5.25
TWIST GRIP CONNECTORS-PACKAGE OF 10
O.D.
I.D. Length Cond. Part No. Racer Net
.362x.312 .225x.100 3/4" 3/16" AZ2381 $4.88
CONDUIT BUTTONS-PACKAGE OF 10
I.D.
I.D.
.260"
.290"
.316"
.375"
BALL ADAPTERS-PACKAGE OF 10
O.D.
BALL LENGTH FOR CABLE PART NO. RACER NET
1/4"
9/32
3/8"
1/4"
3/16"
3/16"
3/16"
3/16"
3/8"
1/4"
3/8"
1/4"
up to 5/64
up to 5/64
up to 5/64
up to 5/64
AZ2362
AZ2363
AZ2364
AZ2365
$6.38
5.63
6.75
6.00
HOLE DIA. WIDTH LENGTH FOR CABLE PART NO. RACER NET
1/2"
1 1/8" up to 5/64" AZ2366
3/4"
3/4"
7/32"
1/4"
Part No. Racer Net
AZ2369
AZ2370
$6.75
9.00
O.D.
I.D.
LENGTH COND.
5/16" 3 1/8" 1/4"
1/4" 2 15/16" 7/32"
1/4"
2"
7/32"
I.D. LENGTH
1/4"
3/4"
COND.
1/4"
PART NO. RACER NET
AZ2380
$6.00
CONDUIT RETAINERS, HEX-PACKAGE
OF 10
O.D.-Thrd. I.D. LENGTH COND. PART NO. RACER NET
5/16-24 .260"
1"
7/32" AZ2372
$10.88
1/4-28 .260" 1 1/2"
1/4" AZ2373
12.00
CONDUIT RETAINERS,
STRAIGHT-PACKAGE OF 10
SPRINGS-PACKAGE OF 10
7/16"
.350"
.350"
O.D.
N/A
PART NO. RACER NET
AZ2390
AZ2391
AZ2392
$5.25
4.88
5.25
O.D.-Thrd. I.D.
5/16-24 .260"
5/16-24 .287"
LENGHT COND PART NO. RACER NET
2"
2"
7/32" AZ2386
1/4" AZ2387
$12.00
12.00
CONDUIT CLIPS-PACKAGE OF 10
CLEVIS-PACKAGE OF 10
1/4"
Length Cond.
CONDUIT CLAMPS-PACKAGE OF 10
$5.25
BAR CLIP I.D.
CONDUIT NOTCH I.D.
7/8"
1"
3/16"
1/4"
PART NO. RACER NET
AZ2374
AZ2378
$4.13
5.63
SPRING STEEL CLEVIS
Plated light weight throttle clevis, accepts cables
to 1/16".
PART NO.
DESCRIPTION
RACER NET
AZ8157 Spring Steel Clevis w/ Cotter Pin $.56
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
STARTERS & REPL. PARTS
BURRIS GEAR REDUCTION STARTERS
PART NO.
DESCRIPTION
BMC100RH5
RH 2-CYCLE STARTER (SELF CONTAINED)
DRIVE = 5/16" HEX & 1/2" SQUARE
RH 4-CYCLE STARTER (SELF CONTAINED)
DRIVE = 3/8" SQUARE W/THREADED END
FOR SOCKET ATTACHMENT (LESS SOCKET)
LH 2 OR 4 CYCLE STARTER
(SELF CONTAINED) DRIVE = 3/8" SQUARE
W/THREADED END FOR SOCKET
ATTACHMENT (LESS SOCKET)
RH 2-CYCLE STARTER (HAND HELD)
RH 4-CYCLE STARTER (HAND HELD)
DRIVE = 3/8" SQUARE W/THREADED
END FOR SOCKET ATTACHMENT
(LESS SOCKET)
LH 2 OR 4 CYCLE STARTER (HAND HELD)
DRIVE = 3/8" SQUARE W/THREADED
END FOR SOCKET ATTACHMENT
(LESS SOCKET)
BMC100RH6
BMC100LH6
BMC101RH2
BMC101RH4
BMC101LH2
SELF CONTAINED
RACER NET
REPLACEMENT PARTS
BMC102RM
RH STARTER MOTOR
BMC102LM
LH STARTER MOTOR
BMC103RH2
REPL. DRIVE SHAFT WITH STEPPED BORE
.500" WITH 5.30" REGISTER (SPLINED MOTOR)
BMC103RH4
REPL. DRIVE SHAFT WITH STEPPED BORE
500" WITH 5.30" REGISTER (SPLINED MOTOR)
DRIVE WITH 3/8" SQUARE FOR SOCKET
(SOCKET NOT INCLUDED)
BMC103RH2530
REPL. DRIVE SHAFT WITH STRAIGHT BORE
.530" DIA. (MOTORS AFTER 04-09)
BMC103RH4530
REPL. DRIVE SHAFT WITH STRAIGHT BORE
.530" DIA. (MOTORS AFTER 04-09)
DRIVEWITH 3/8" SQUARE FOR SOCKET
(SOCKET NOT INCLUDED)
BMC106
SOLENOID
BMC109
CABLE SET - FOR HAND HELD STARTERS
BMC113
BATTERY - SEALED LEAD ACID
BMC114
5/16" REPLACEMENT HEX TIP FOR BMC103RH2
$255.00
255.00
255.00
178.95
178.95
178.95
105.00
105.00
42.00
42.00
HAND HELD
42.00
Sorry, No Air Shipments on Starters and Batteries
42.00
FORMULA 200 STARTER
NUTS
22.50
38.25
67.50
7.50
CLONE
ALUMINUM
NUT
PART NO.
AP4369
AP4370
PART NO.
AP5404
DESCRIPTION
Yamaha & Honda Starter Nut
with 3/4" hex
Briggs Starter Nut with 5/8" x 18 thread
with 3/4" hex
RACER NET
$14.41
BRIGGS STARTER NUTS
DESCRIPTION
H480600
H480700
5/8-18 Thread (Raptor & Early Animal)
Metric Thread
(Late Animal & World Formula)
$14.99
14.99
BRIGGS ALUMINUM
STARTER NUT
Made from alloy steel, this nut is
designed for starting your Briggs with
the popular hex drive starters. 5/8" x 18
thread
PART NO.
RACER NET
RACER NET
$14.99
14.99
Less weight on crank for
quicker revs.
Crankshaft modification required for use.
AP2443
Briggs 5 hp
5/8" x 18 thread
$16.38
133
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
AIR FILTERS
PART
NO.
RACER
NET
DIA
X LENGTH
RU0060 $28.81
3"x3"
RU0070
29.27
3"x4"
RU0100
29.27
3"x4"
RU0110
29.33
3"x5"
RU0160
29.27
3"x4"
G-20
29.27
3"x4"
G-26
31.50
4"x2"
G-50
30.17
3-1/2"x4"
RU-140
29.43
3-1/2"x4"
G-90
32.82
4-1/2"x4"
G-91
34.17
4-1/2"x5"
G-146
31.34
4"x5"
RU-94
38.02
5-1/2"x3"
G-80
30.17
3-1/2"x4"
RU0820
31.03
3-1/2"x6"
G83
32.82
4-1/2"x4"
G84
34.17
4-1/2"x5"
G175
30.11
3-3/4"x4"
RU1770
32.06
3-3/4"x6"
G87
38.02
5-1/2"x3"
RU1700
30.17
3-1/2"x4"
*Flange will stretch 1/8" oversize.
FLANGE
INSIDE
DIAM.
STYLE
*1-1/4"
*1-1/4"
*1-1/4"
*1-1/4"
*1-1/2"
*1-11/16"
*1-11/16"
*2-1/16"
*2-1/16"
*2-3/4"
*2-3/4"
*2-3/4"
*2-3/4"
*2-7/16"
*2-7/16"
*2-7/16"
*2-7/16"
*2-7/16"
*2-7/16"
*2-7/16"
*2-1/4"
Centered
Centered
20° Angle
20° Angle
Centered
Centered
Centered
Centered
20° Angle
Centered
Centered
10° Angle
Offset
Centered
Centered
Centered
Centered
20° Angle
20° Angle
Offset
20° Angle
K&N HI-PERFORMANCE AIR FILTERS
• More Filtering Surface
• Clean & Re-Use
CENTERED
• Less Restriction
• Rubber Flange for Tight
Seal
OFFSET
ANGLED
K & N FILTER OIL
PART NO.
DESCRIPTION
RACER NET
KNFO-8
8 oz. Squeeze Bottle
$4.85
CLEANER & DEGREASER
PART NO.
DESCRIPTION
RACER NET
KNCD-32
32 fl. oz. (1 qt.) bottle
$9.34
PRE-CHARGER KIT
PART NO.
KN995000
DESCRIPTION
RACER NET
6 1/2 oz. Aerosol Spray
and 12 oz. Filter Cleaner
KN990504 6 1/2 oz. Aerosol Spray
SOCK-IT Pre Filters
CLOSED END FOAM
FILTER SOCK
By themselves the K&N's or foam filters do a good job,
but the DIRT TRACK RACER asks for more. Here it
is, the “Sock-it”. Providing two stage filtering, “Sockit” is a foam filter sock which will slip snugly over most
K&N style filters popular in karting today.
Part No.
G1262
AP5567
AP5566
G1294
AP4229
Max Diam. Max Length
3 1/2"
3 1/2"
3 3/4"
4 1/2"
3"
5"
8"
6"
5"
5"
Racer Net
$2.97
3.38
3.45
3.38
3.38
Part No.
Desc. Racer Net
AP5383 3 3/4" X 6" $3.98
(Length may be trimmed
to fit filter lenght)
$10.32
6.07
OUTERWEARS "SCRUB BAG"
Made from a durable denier nylon, the new "SCRUB
BAG" will keep your air filter high and dry during
washing, transporting or that occasional track
downpour.
Please specify color when ordering Red, Blue or
Black
Part No.
Application
Racer Net
AP1681 Fits 3-4" Dia. x 4" tall filters
$8.50
8.95
9.95
X-STREAM K&N AIR FILTERS
PART NO.
RX3770
RX3800
RX3810
RX3820
DIA./LENGTH
4.5” x 6” x 6”
4.5” x 4” x 6”
4.5” x 6” x 6”
4.5” x 4” x 6”
FLANGE
2 7/16”
2 7/16”
2 7/16”
2 7/16”
STYLE
RACER NET
200 Angled/Reverse Taper
$57.76
200 Angled/Tapered
52.93
Centered/Reverse Taper
65.73
Centered/Tapered
65.73
OUTERWEARS FOR K&N X-STREAM FILTERS
(Available in black only)
PART NO.
FITS FILTER #
RACER NET
AP2508
AP2509
RX3810 & RX3770
RX3820 & RX3800
$12.71
11.96
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
AIR FILTERS
PART
NO.
AP5551
DESC.
RACER
NET
3 1/4" x 4' x 1 1/4" $31.13
Fits Animal Carbs
PART
NO.
AP5552
DESC.
RACER
NET
4 1/2" x 4' x 1 1/4" $31.13
Fits Animal Carbs
PART
NO.
AP5563
DESC.
RACER
NET
5 1/4" x 6' x 2 7/16" $44.63
FILTER CLEANER &
OIL
BRIGGS
"FUN POWER"
AIR FILTER
ADAPTER
(2 7/16" O.D.)
PART NO.
DESCRIPTION
KL608C
KL608
Case of 10 cans
1 can (16 oz.)
RACER NET
$48.75
5.20
Fabric filter oil aerosol can 151/2oz. For K&N type filters
KL607C
Case of 10 cans
$52.88
KL607
1 Can
5.64
PART NO.
DESCRIPTION
AP2236
AP1642
RACER NET
Adapter only 2 1/2" O.D.
3 1/2"x 4" Tapered filter
$8.21
12.27
Foam filter oil aerosol can 151/2oz.
KL606C
Case of 10 cans
KL606
1 Can
FABRIC AIR FILTERS
$51.75
5.52
FOAM FILTERS
With or Without Clamps
CENTERED
PART #
DIA x LENGTH
AP4230
AP4231
AP1636
AP1637
AP1638
AP5564
AP1639
AP1640
AP1641
AP1642
AP1643
AP5561
AP5562
AP1644
AP5565
AP1645
AP1646
AP1647
3"x 4"
3"x 5"
3"x 4"
4"x 2"
3 1/2" x 4"
3 1/2" x 4"
3 1/2" x 6"
3 1/2" x 4"
3 1/2" x 4"
3 1/2" x 4"
3 1/2" x 6"
3 1/2" x 6"
3 1/2" x 8"
4 1/2" x 4"
4 1/2" x 4"
4 1/2" x 5"
4" x 4 1/2"
4" x 5"
TAPERED
FLANGE
1 1/4
1 1/4"
1 11/16
1 11/16"
2 1/16"
2 1/16"
2 1/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 7/16"
2 3/4"
2 3/4"
ANGLED
I.DSTYLE
RACER NET
200 Angle
$13.47
200 Angle
14.63
Centered
12.00
Centered
12.00
Centered
12.00
Tapered
12.00
Centered
11.93
Centered
12.00
200 Angle
11.40
Tapered
12.27
Centered
12.23
200 Angle
12.27
0
20 Angle
13.47
Centered
11.85
Centered/Open End 11.85
Centered
11.93
Centered
11.93
10• Angle
11.40
PART NO.
G1258
G1285
G1269
G1286
DESCRIPTION
4" L 2" I.D
2 1/4" I.D x 6"
Same as G1258 w/o clamp
Same as G1285 w/o clamp
RACER NET
$7.88
9.53
7.38
8.51
RUBBER
FLANGED/SPRING
LOADED
FOAM FILTER
ASSEMBLIES
New rubber flanged spring loaded foam rubber filter elements. New
flange material gives wide range of adapter diameters that may be used.
PART NO.
FLANGE
RANGE
G1281
2 3/8"-2 3/4"
FILTER DIAM.
X LENGTH
3 3/4"x5"
STYLE
RACER
NET
straight
$14.30
135
ADAPTERS & OUTERWEARS
AIR FILTER ADAPTERS
BRIGGS AIR FILTER
DIRT DEFLECTOR
G2234
G2232
G2235
G2233
G2236
G2294
G2200
AP1059
AP2365
O.D RACER NET
12.98
12.98
12.98
12.98
12.98
12.63
12.38
13.59
13.59
BRIGGS
WALBRO
STYLE/CONSTRUCTION
Offset-Alum. Billet
2 1/2"
Centered-Alum. Billet
2 1/2"
Offset-Alum. Billet
2 1/2"
Centered-Alum Billet w/Gasket & Bolts
2 1/2"
Centered-Alum Billet w/O-Ring Seal & Bolts 2 1/2"
Centered-Alum. Billet
2 1/2"
Centered & Contoured-Alum. Billet (WKA) 2 1/2"
Centered Alum. Billet (Velocity Stack)
2 1/2"
Centered Alum. Billet (Velocity Stack)
2 1/2"
TIL. HL1.370"
TIL. HL1.870"
TIL. HL1.950"
Part No.
Burris
TIL.HR
G2235
G2200
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
x x
x
x
x
x
x
x
x
x
This specially designed shield and clamp assembly
protects your air filter from a direct assault by dirt flung
up from the track surface.The special flexible material
and the adjustable clamp allow use with filters from 3"
to 5" diameter. Shield is 4" high.
PART NO.
G1290 Dirt Deflector with Clamp
$6.98
OUTERWEARS ASPHALT AIR FILTER SYSTEM
4"x4" filter framework & pre-filters fits
2 7/16" adapters
PART NO.
AP1700R
AP1700BL
AP1700BK
AP1701
DESCRIPTION
Red
Blue
Black
Framework only
RACER NET
$21.96
21.96
21.96
12.71
OUTERWEARS PRE-FILTERS
Outerwears Pre-Filters are designed to keep the bigger and
most damaging particles of sand, dirt, clay, and oil dry from
getting to and clogging the fins of your air cleaner element.
Outerwears Pre-Filters simply stretch on over existing air
cleaner casing or element and may be washed up in soap and
water. Solvents may be used on tougher oil stains.
PART NO.
4MG202
AP4198
AP4199
4MG262
4MG502
AP5477
4MRU572
4MG1832
4MG902
4MG912
4MG146
4MRU942
4MRU172
DESCRIPTION
Fits 3"x3" Air Filters
Fits 3 1/2"x 4" Air Filters
Fits 3 3/4"x6" Air Filters
Fits 5 1/2"x3 1/2" Air Filters
RACER NET
$8.96
8.96
8.96
8.96
8.96
8.96
11.21
8.96
8.96
8.96
8.96
11.21
11.21
NOTE: Please add color code to end of part number when
ordering. Red "R", Black "BK" or Blue "BL"
COLORS AVAILABLE:Red,Black or
Blue
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
AIR BOXES & AIR FILTERS
RLV AIR INTAKE SILENCERS
PART NO.
DESCRIPTION
RACER NET
RLV0301* Intake silencer, two 23mm tubes at 900, black $28.91
RLV0308* Intake silencer, three 23mm tubes at 900, black 32.74
RLV0343 Intake silencer, 80cc Shifter two 23mm
49.95
tubes (4 locations)
RLV0344* Intake silencer, four 29mm tubes, 4 screens
48.20
and 2 plugs. Allows use of up to 4 tubes
RLV0362 Air box tubes, 23mm (2 pack)
6.27
RLV0363 Air box tubes, 29mm (2 pack)
6.27
RLV0200** Air filter, (foam) for all air boxes,internal,straight 16.16
RLV0202** Air filter, (foam) for all air boxes,internal,
16.16
200 angled
AP1711
Air box rubber connector
9.64
AP1699
Rain Hood
11.57
*Note: The rubber air box connecting boot is removable and
reversible. One end is straight and the other end is angled. Cut off the end not used to increase air flow.
**Note: This filter is easily used in any air box. Remove the rubber connector at the carb end of the box and snap the filter into the existing groove.
The air box plastic body should not be allowed to rotate or spin on the rubber connector. The rotating may tear the rubber boot. Use an RLV air
box mount or affix the box so it will not rotate. Filters must be oiled to work properly and unoiled filter is no filter at all.
THE BOX SOCK by OUTERWEARS
• WKA Approved
• One size fits 2 and 3 hole air box; available in RED only
• Simply slides over your present air box
• Eliminates the need for an internal foam filter
• Keeps stones and rubber out of the air box
• Simply turn the Box Sock and run a clean filtered area
• Water repellent - race in the rain!!
• Designed for All 2 cycle kart engines
PART NO.
AP2987
DESCRIPTION
The Box Sock (Red)
RACER NET
$15.34
THE RLV
COMPLETE
AIRBOX MOUNT
Serious equipment that fully supports the airbox and filtering system. The RLV Complete Airbox
Mount easily maintains the connection between the carburetor cup
and the airbox under the most
adverse and demanding
conditions. It's fully adjustable, machined from billet aluminum,
anodized black, and accompanied with a gold cadmium
plated cradle.
PART NO.
AP2800
AP2801
AP2802
AP2803
AP2804
DESCRIPTION
RACER NET
Airbox Mount complete; frame clamps,
$46.05
swivels, cradle, bungie cord
Airbox Mount only; frame clamp & swivels 36.75
Airbox Cradle assembly; Cradle, bungies,
13.80
bolts, washers & nuts
Airbox Mount cradle only
7.37
Airbox Mount bungie cord only (1 pair)
2.42
K&N AIRBOX
Now a kart airbox that allows use of a legendary washable/reusable filter.
PART NO.
DESCRIPTION
RACER NET
RK1000
Airbox Only
$63.73
** Requires use of RU5005 or RU5006
Air Filter (Sold Separately)
PART NO.
DESCRIPTION
RACER NET
RU5005 2 1/2" ID Straight Flange $51.19
PART NO.
DESCRIPTION
RACER NET
RU5006
2 1/2' 200 Flange
$51.19
137
SPARK PLUGS & CONNECTORS
Part No.
Reach-Type-Application
Racer Net
AUTOLITE SPARK PLUGS ..............................................
AU295 ............... 3/8" Standard, Raptor ........................ $1.89
AU353 ............... 3/8" Standard, Raptor .......................... 1.89
AU411 ............... 1/2" Standard, Raptor .......................... 3.14
AR3933 ............. 3/4" Standard, Animal/Clone ............... 4.47
AR2593 ............. 3/4" Standard, Yamaha ....................... 4.47
AR51 ................. 3/4" Standard, Yamaha ....................... 3.75
AU2592 ............. 3/4" Standard, Yamaha ....................... 4.47
DENSO SPARK PLUGS ...................................................
Q16RU11 .......... 3/4" Standard, Animal ........................ $1.99
Q20RU11 .......... 3/4" Standard, Animal .......................... 1.99
Q22PRU11 ........ 3/4" Standard, Animal .......................... 1.99
Q16RZU11 ........ 3/4" Hi-Performance, Animal ............... 7.95
Q20RZU11 ........ 3/4" Hi-Performance, Animal ............... 7.95
U20ESRN ......... 3/4" Standard, World Formula ............. 1.99
U24ESRNZU ..... 3/4" Hi-Performance, ........................... 7.95
.......................... World Formula
W20MPU ........... 3/8" Standard, Comer C-50 ................. 1.68
W14U ................ 3/8" Standard, Raptor .......................... 1.68
W16SU .............. 3/8" Standard, Raptor .......................... 1.68
W16FSU ........... 1/2" Standard, Raptor .......................... 1.68
W16ESU ........... 3/4" Standard, Yamaha ....................... 1.68
W20ESZU ......... 3/4" Fine Wire, Yamaha ....................... 4.97
W20EPRU ......... 3/4" Standard, CLONE ........................ 1.99
DENSO IRIDIUM SPARK PLUGS ....................................
iWF22 ................ 1/2" Raptor ......................................... 12.95
iWF24 ................ 1/2" Raptor ......................................... 12.95
iWF27 ................ 1/2" Raptor ......................................... 12.95
iK20 ................... 3/4" Animal ........................................ 12.95
iK22 ................... 3/4" Animal ........................................ 12.95
iK27 ................... 3/4" Animal ........................................ 12.95
iW24 .................. 3/4" Yamaha, TAG, ICA ..................... 15.95
iW27 .................. 3/4" Yamaha, TAG, ICA ..................... 15.95
iW29 .................. 3/4" Yamaha, TAG, ICA ..................... 17.95
iW31 .................. 3/4" Yamaha, TAG, ICA ..................... 17.95
iW34 .................. 3/4" Yamaha, TAG, ICA ..................... 17.95
NGK SPARK PLUGS ........................................................
BR9EIX ............. 3/4" Yamaha, TAG, ICA ....................... 8.25
BR10EG ............ 3/4" Yamaha, TAG, ICA ....................... 6.60
BR10EIX ........... 3/4" Yamaha, TAG, ICA ....................... 7.25
BR9HIX ............. 1/2" Comer C-50 .................................. 8.25
BR10HIX ........... 1/2" Comer C-50 .................................. 8.25
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
O.E.M. BRIGGS PLUG COVER WITH
PULLER
PART NO.
RACER NET
692927
$2.22
"Arc Proof"
PLUG WIRE SLEEVE
KIT
Eliminate Power Loss...
PART NO.
M891
DESC.
RACER NET
16" Length
$8.95
SPARK PLUG BOOTS
NGK
RESISTOR
PLUG CAP
PART NO.
DESC. RACER NET
AP2317 (BK,BL, R, PR) $1.50
PART NO.
RACER NET
AP4622
$3.95
SPARK PLUG
WASHERS
Spark plug washers are just
the trick for indexing your
spark plug. Each kit contains
10 each, of three sizes of
copper washers.
(DOES NOT FIT WORLD
FORMULA)
PART NO.
DESCRIPTION
RACER NET
AP5120 Spark Plug Washers (30)
$8.95
NGK WATERPROOF
RESISTOR PLUG CAP
PART NO.
RACER NET
AP4623
$7.74
SCALES
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
* Large, easy to read display
* Stores 100 chassis setups
* Baseline setup recall
* User selectable display modes
* View ANY combination of scale pad
weight & percentage
* Center of gravity calculation
* Target tune feature
* 8 x 10 x 2 billet pads (400 lb capacity)
* Standard 9 volt battery operation
* RS232 output
* Giant 0.5", backlit, display characters
* Includes carrying case & 9 volt
rechargeable battery
* 2 yr warranty
PART NO.
RACER NET
AP4109
$949.00
Wireless System Includes:
• Wireless RFX Billet Pads 10˝ x 10˝ x 2˝
(254 x 254 x 51mm)
• USB & RS232 Output
• One Touch Indicator with Storage Case
• AA Alkaline Batteries
• 2-Year Warranty
• 400 lb (200 kg) Pad Capacity
• 1,600 lb (800 kg) System Capacity
• 4-Bolt Load Cell Design
• Stores 100 Chassis Setups
• Baseline Setup Recall
• Center of Gravity Calculation
• User Selectable Display Modes
• Certified to 0.1% Accuracy
• Giant 0.5˝, Backlit, Display Characters
PART NO.
AP5484
RACER NET
$1,695.00
139
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TOOLS
SPARK PLUG WRENCH
FEELER GAUGE
• Sixteen 1 /4" x 1 3/4" blades
• Thickness from .011" thru .032"
• Fits 3/4" hex shorty plugs and
13/16" hex standard plugs
PART NO.
RACER NET
PART NO.
RACER NET
AP1787
$11.95
AP1790
$2.83
SNAP RING PLIERS
PLUG GAP GAUGE
• Convertible for either
internal or external snap rings
•.045" diameter tips 5 3/4" long.
•"SILVER DOLLAR" taper gauge
• Shows inch and millimeter from
.020" to .100" (0.6-2.4mm)
PART NO.
RACER NET
AP1788
PART NO.
RACER NET
AP1792
$7.95
$5.95
KINETIC FLYWHEEL REMOVER
•Use on Briggs Raptor/"L" Head engines
VALVE STEM TOOL
•To install and remove valve
stem cores
PART NO.
RACER NET
AP1789
$4.95
COMPRESSION
TESTER
• 2 1/2" diameter
•Reads up to 200 P.S.I
•Fits 14mm and 18mm spark
plug holes.
•3/4" hex at base for
installation and removal.
PART NO.
RACER NET
M813
$10.95
PRESSURE CHECK
FITTING
Spark plug thread allows engine pressure
checking to be done through cylinder head.
PART NO.
RACER NET
PART NO.
RACER NET
AP1791
$58.95
G4437
$7.71
6" VERNIER CALIPER
1" DIAL INDICATOR
• Stainless Steel Caliper with case.
PART NO.
RACER NET
PART NO.
RACER NET
AP1361
$19.95
AP1362
$24.95
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TOOLS
LEAKDOWN TESTER
YAMAHA BOTTOM
TORQUE GIRDLE
New MiSi Bottom Torque Girdle supports
cylinder sleeve during boring and honing
operation to assure proper tension.
• ACCURATE PISTON FIT
• INCREASED COMPRESSION
• REDUCED HEAT & FRICTION
NOTE: Torque to 150 inch pounds (or 12.5 pounds)
before boring and honing operation.
PART NO.
AP5204
Install piston and rings in seconds with this
"one step" tool!
PART NO.
M854BY
RACER NET
$29.90
$52.92
52.92
2-CYCLE PISTON STOP
Thread the piston stop into the spark plug hole,
run the piston up against the end and the crank
is locked solid. No trouble, No Hassle, No
misalignment.
MiSi PISTON PIN
REMOVAL &
INSTALLATION TOOL
For use on Italian, English and Japanese
Kart Engines.
• Proper use Eliminates "Bent Rods".
• Holds Needle Bearings and Spacers in
Place.
• Comes complete with all necessary
accessories.
• Supplied with 6 spacer washers in three
sizes to accommodate most piston sizes.
PART NO.
DESCRIPTION
RACER NET
M856
Briggs & Stratton "Raptor" $27.95
M856BSA Briggs & Stratton "Animal" 27.95
M854
Yamaha, Atlas & BM 100cc 15.95
HEAD HOLDING TOOL
M833K
Raptor Kit all sizes
M833KBSA Animal Kit 4 sizes
PART NO.
M828
Proper cylinder honing with MiSi torque plate
reduces cylinder distortion for better
compression and ring seal. Cylinder life is
extended and break in time is reduced.
RACER NET
$110.00
SLIP FIT PISTON & RING
INSTALLATION TOOL
PART NO.
CYLINDER TORQUE
PLATE
PART NO.
RACER NET
W3841
$13.80
• For polishing or machining any 14mm
center spark plug located head.
• Make head alterations for proper
compression ratio.
• Designed for use in most machine lathes
for work on:
•Piston Valve •Reed Valve •Rotary Valve
Cylinder Heads
PART NO.
M811
RACER NET
$17.95
ANIMAL PISTON STOP
Part No.
G4497
Racer Net
$13.46
RACER NET
$31.46
141
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TOOLS
FLEX-HONE
PART NO.
GRIT/GRIT TYPE
DIA.
AP2141 ....... 180 Silicon carbide .......... 2 1/2" ....
AP2143 ....... 180 Aluminum oxide ........ 2 1/2" ....
AP2151 ....... 320 Aluminum oxide ........... 1" .......
AP2152 ....... 240 Aluminum oxide ........ .250" ....
AP2411 ....... 180 Aluminum oxide ........... 1" .......
AP2412 ....... 180 Aluminum oxide ... 18mm/.709"
AP2413 ....... 320Aluminum oxide .... 18mm/.709"
USAGE
RACER NET
Up to .030" cast iron bore ......... $25.44
Up to .030" cast iron bore ........... 38.15
Up to .030" aluminum bore ......... 30.54
.060" to .140" cast iron bore ....... 28.09
.060" to .140" cast iron bore ........ 42.12
.060" to .140" aluminum bore ...... 32.40
.060" to .140" aluminum bore ...... 50.55
.060" to .140" aluminum bore ...... 50.55
Rod journal clearancing .............. 28.94
Valve guides ............................... 14.17
Rod journal clearancing .............. 19.30
Carb. bore blueprinting ............... 18.33
Carb. bore blueprinting ............... 27.51
BRIGGS CARB
ALLEN WRENCH
Makes Installing Carb Mounting
Bolts Much Easier!
QUICK CHANGE
VALVE SPRING
COMPRESSOR
PART NO. RACER NET
AP279
$7.95
CYLINDER HONE
PART NO.
AP5269
DESCRIPTION
1 1/4" - 3 1/2" Range
220 Grit 2" Stones
RACER
NET
$32.60
PART NO. RACER NET
AP971
$2.80
VALVE SPRING COMPRESSOR
PART NO.
AP2219
VALVE SPRING
PRESSURE TESTER
VALVE GAUGING TOOL
Briggs & Stratton 5 HP
• HOLDING TOOL is heat treated to eliminate wear.
• Use right or left hand
•
STEP GAUGE
Four positions to measure
Valve Stem Removal
.005 (1/2 thousands)
.001
.003
.005
M829
NEW!!
Will also do lifters.
DOES NOT
INCLUDE FILE
1. Insert valve into holding tool
and position over step gauge
for proper amount to be
removed.
2. Tighten wing nut to hold valve
in position.
3. Stroke holding tool on a flat file
to remove excess valve stem.
PART NO.
RACER NET
$37.95
HOLDING
TOOL
• Briggs & Stratton 5 HP - Can be used with other valves with 1/4" dia. stem. (.248)
• PRECISE valve end clearance with this "Easy-To-Use" tool.
RACER NET
$40.46
Measures small engine valve spring
pressures at any spring height.
0-60 PSI Gauge
PART NO.
AP2401
RACER NET
$103.76
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TOOLS
STANDARD, METRIC & NUT
SAF-T-BLOK
Both the standard and metric Saf-t-blok are designed to take the
headache and hassle out of drilling safetywire holes in bolts.
You can drill a 5/64" hole through 1/4", 5/16" and 3/8" fine and
coarse bolts with the Standard while the Metric will handle 6 x
1.0, 8 x 1.25, 10 x 1.25 and 10 x 1.5 bolts.
Also Nut Saf-t-blok for drilling nuts for safetywire holes.
PART NO.
DESCRIPTION
W4754
W4755
W4756
Standard Saf-t-blok
Metric Saf-t-blok
Nut Saf-t-blok
SAFETYWIRE PLIERS
PART NO.
AP5180
DESCRIPTION
RACER NET
Safetywire Pliers (Imported)
$32.78
RACER NET
$27.50
27.50
29.70
SAFETYWIRE
For securing fasteners,
assembly and service work,
and general use. Unique one
pound dispenser uncoils from
inside... no wild uncoiling,
easy to handle, less waste.
304 Stainless Steel, .032
diameter.
PART NO.
W4759
DESCRIPTION
Safety Wire 1 lb.
PISTON
ALIGNMENT
TOOL
This handy new
item from G.E.M.
spans the top of
your crankcase
with one prong on
each side of rod.
Rotating crank brings piston to rest on top
surface of tool, putting piston into
alignment for easy installation of cylinder.
PART NO.
RACER NET
G4580
$10.11
RACER NET
SafTblok
The newest addition to the SafTblok Family, the “Allen
SafTblok 2” designed to accept USS & SAE as well as Metric
Socket Head Cap Screws. Will also drill tubing up to 1/2" in
diameter. Like the rest of the SafTblok family, this new drilling
fixture takes the headaches and hassle out of safety wire
drilling.
PART NO. RACER NET
AP5077
$19.99
MiSi RING
LAPPING
TOOLS
2" TRAVEL
DIAL INDICATOR &
BRACKET ASSEMBLY
"DIAL IN" YOUR ENGINE... With this new two
inch travel dial indicator
and custom bracket assembly from G.E.M. Timing etc. of your engine
should be a snap. The
drawing shown here tells
the story. Indicator is top
quality, adapter is aluminum and designed to fit
virtually any of the two
cycle engines used in
karting today.
PROPER RING LAPPING...
•Greatly reduces break-in time.
•Increases piston seal.
•Reduces Carbon build-up
When installing new piston rings the MiSi lapping tool allows you to hand fit the ring to piston
groove and eliminate factory "high spots".
Proper ring seat helps stop "blow-by", carbon
build-up, and ring sizing. Models available for
Yamaha & Briggs Kart Engines.
PART NO.
DESCRIPTION
RACER NET
W4751
52mm Yamaha
$13.50
AP831
Briggs & Stratton "Raptor" 13.45
M812BSA Briggs & Stratton "Animal" 13.45
$29.70
PART NO.
G4550
G4555
DESCRIPTION
RACER NET
Indicator & Bracket Assy.
Bracket Assy. Only
$89.97
21.30
143
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
TOOLS
RAPTOR TOOLS
PART NO.
BS19244
BS19167
BS19063
BS19368
BS19064
BS19066
BS19122
BS19191
BS19237
BS19367
DESCRIPTION
RACER NET
Wrench starter clutch (Raptor) .......... $9.87
Flywheel holder (Raptor) ................... 29.95
Valve spring compressor ................... 22.95
Ignition tester ..................................... 17.20
Valve guide counterbore reamer ....... 30.55
Valve guide finish reamer .................. 18.55
Pilot gauge .......................................... 7.25
Pilot bushing ........................................ 8.30
Valve seat cutter kit ......................... 190.00
Valve guide driver ................................ 6.45
PART NO.
BS94150
BS19258
BS19269
BS19138
BS19136
BS19126
BS19340
BS93963
BS19070
BS19393
DESCRIPTION
RACER NET
Lapping compound .......................... $13.05
Valve lapper ........................................ 4.97
Valve guide repair kit ......................... 76.30
Valve seat puller kit ........................... 67.00
Valve seat driver ................................ 27.90
Valve seat driver pilot ........................ 33.70
Piston ring expander ......................... 14.25
Valve guide lubricant ........................... 6.95
Piston ring compressor ........................ 9.10
Torque Wrench (Beam Style) ............ 49.95
PISTON RING FILER
DIAL INDICATOR ADAPTER
BRACKET & KITS
FOR BRIGGS
DOUBLE SIDED DEGREE
WHEEL KIT FOR BRIGGS
Heavy gauge aluminum 7" dia. wheel and all
the adapters you'll need.
Includes adapters to mount wheel on PTO or
ignition end of crank, plus degree wheel and
pointer.
PART NO.
DESCRIPTION
Here's a bracket to adapt most popular dial
indicators to your Briggs engine for checking
valve lift, piston travel etc. Complete kit includes our top quality dial indicator, necessary
extension and complete bracket assembly.
G4559
G4560
Adapter Assembly
Only
Dial Indicator &
Bracket Assembly
$19.67
The Diamond Wheel Piston Ring Filer is
the perfect tool for the new file fit piston
rings for the Briggs Animal and World
Formula engines.
CAUTION! this is a diamond grinding
wheel. It cuts fast.
PART NO.
RACER NET
AP5166
$50.95
57.35
RACER NET
G4499 Double sided kit
G4498 Double sided wheel only
$35.07
20.16
CLONE ENGINE, Parts & Access.
Part No.
AP5223 .........
AP5223D .......
AP5223BP ....
DJ1040 ..........
DJ1045 ..........
DJ1050 ..........
DJ1060 ..........
DJ1065 ..........
DJ1070 ..........
DJ1071 ..........
DJ1075 ..........
DJ1080 ..........
DJ1085 ..........
DJ1090 ..........
DJ1095 ..........
DJ2075 ..........
DJ1105 ..........
DJ1107 ..........
DJ1115 ..........
DJ1115A .......
DJ1116 ..........
DJ1120 ..........
DJ2120 ..........
DJ1125 ..........
DJ2125 ..........
DJ1130 ..........
DJ1135 ..........
DJ1150 ..........
DJ1151 ..........
DJ1152 ..........
DJ1155 ..........
DJ1165 ..........
DJ1170 ..........
DJ1172 ..........
DJ1175 ..........
DJ1180 ..........
DJ1185 ..........
DJ1190 ..........
DJ1191 ..........
DJ1200 ..........
DJ1205 ..........
DJ1210 ..........
DJ1220A .......
DJ1221 ..........
DJ1224 ..........
DJ1225 ..........
DJ1226 ..........
DJ1227 ..........
DJ1227A .......
DJ1227B .......
DJ1227C .......
Part No.
DJ1228 ..........
DJ1229 ..........
DJ1230R .......
DJ1231S .......
DJ1232 ..........
DJ1233 ..........
DJ1234 ..........
DJ1235 ..........
DJ1236 ..........
DJ1237 ..........
DJ1238 ..........
DJ1239 ..........
DJ1240 ..........
DJ1241 ..........
DJ1245 ..........
DJ1250 ..........
DJ2241 ..........
DJ1257 ..........
DJ1260 ..........
DJ1261 ..........
W20EPRU .....
Description
Racer Net DJ1265 ..........
DJ1270 ..........
BOX STOCK PROJECT ENGINE ................. $134.95
DJ1275 ..........
CLONE ENGINE .............................................. 124.95
DJ1276 ..........
T-REX BLUEPRINTED ENGINE ..................... 499.95
DJ1279 ..........
INTAKE SPRING RETAINER .............................. 6.85
DJ1280 ..........
EXHAUST SPRING RETAINER .......................... 6.85
DJ1281 ..........
EXHAUST SPRING RETAINER LASH CAP ....... 3.95
DJ1282 ..........
INTAKE/EXHAUST SPRING ............................... 3.45
DJ128400 ......
LIFTER ................................................................ 5.95
DJ128410 ......
PUSH ROD .......................................................... 5.65
DJ128420 ......
GUIDE PLATE FOR PUSH RODS ...................... 2.40
DJ128430 ......
ROCKER ARM .................................................... 3.00
DJ128440 ......
ROCKER STUD ................................................... 2.25
DJ1285 ..........
ROCKER ADJUSTER ......................................... 2.00
DJ2295 ..........
ROCKER ADJUSTER LOCK NUT ...................... 1.14
DJ2296 ..........
ROCKER ASSEMBLY ......................................... 8.00
DJ2297 ..........
GX160 ROCKER ARMS ...................................... 3.70
DJ1290 ..........
CAM ................................................................... 26.95
DJ129010 ......
INLET VALVE OIL SEAL ..................................... 1.25
DJ129020 ......
CYLINDER HEAD ASSEMBLY ......................... 59.95
DJ129030 ......
CYLINDER HEAD .............................................. 30.00
DJ129040 ......
VALVE GUIDE CLIP ............................................ 0.99
DJ2291 ..........
INTAKE VALVE (.985") ..................................... 11.50
DJ2292 ..........
GX160 INTAKE VALVE ....................................... 7.80
DJ1295 ..........
EXHAUST VALVE (.940") ................................. 11.50
DJ1300 ..........
GX160 EXHAUST VALVE ................................... 7.80
DJ1310 ..........
VALVE COVER ................................................... 8.00
DJ1315 ..........
MUFFLER W/HEAT SHIELD ............................. 20.00
DJ1320 ..........
FUEL HOSE W/ CLIPS & JACKET ..................... 3.50
DJ1325 ..........
FUEL HOSE CLIP ............................................... 0.38
DJ1330 ..........
FUEL TUBE ......................................................... 0.38
DJ1335 ..........
FUEL CAP ........................................................... 2.95
DJ1340 ..........
FUEL TANK FILL FILTER ................................... 5.96
DJ1341 ..........
FLYWHEEL ....................................................... 20.00
DJ1345 ..........
FLYWHEEL KEY ................................................. 1.50
DJ1350 ..........
FLYWHEEL FAN ................................................. 5.95
DJ1355 ..........
STARTER CUP ................................................... 5.00
DJ1360 ..........
STARTER NUT .................................................... 0.50
DJ1362 ..........
RECOIL STARTER ............................................ 17.00
DJ1365 ..........
BLOWER HOUSING w/RECOIL STARTER ...... 28.95
DJ1370 ..........
BLOWER HOUSING ........................................... 9.00
DJ1371 ..........
AIR BOX ASSEMBLY ........................................ 20.00
DJ1376 ..........
AIR FILTER W/FOAM PRE-FILTER .................... 4.25
DJ1380 ..........
IDLE ADJUSTMENT SCREW (PLASTIC) ........... 0.99
DJ1381 ..........
MIXTURE ADJUSTING SCREW METAL ............ 1.50
DJ1396 ..........
CARB FUEL ON/OFF SWITCH ........................... 1.50
DJ1400 ..........
CARBURETOR .................................................. 27.95
DJ1405 ..........
CHOKE SHAFT & BUTTERFLY .......................... 3.00
DJ2350 ..........
THROTTLE SHAFT UNIT .................................... 5.50
THROTTLE SHAFT ONLY .................................. 4.00
THROTTLE BUTTERFLY ONLY ......................... 2.00
BUTTERFLY SCREW w/WASHER ..................... 1.00
ORDERS ONLY
1-800-262-0555
ALL QUESTIONS
440-564-8100
Description
Racer Net
CHOKE LEVER/ARM ........................................ $4.00
FLOAT BOWL CHAMBER ................................... 8.00
THROTTLE PULLING ROD ................................ 1.25
CARB THROTTLE SPRING ONLY ..................... 1.25
FINE REGULATING SPRING ONLY ................... 1.25
CARB BOWL SCREW ......................................... 0.99
FLOAT CHAMBER DRAIN SCREW .................... 0.99
INTAKE MANIFOLD (CARB INSULATOR) ......... 5.99
GOVERNOR ARM & PINCH BOLT ..................... 3.50
REGULATING FRAME ASSEMBLY ................... 7.14
CARB FLOAT ...................................................... 0.75
CARB FLOAT NEEDLE ....................................... 1.88
BREATHER TUBE ............................................... 2.15
CARB LOW RPM JET ......................................... 2.50
CARB MAIN JET “70” .......................................... 3.50
MAIN NOZZLE/EMULSION TUBE “200 .............. 6.00
GX140 EMULSION TUBE ................................. 13.75
CLONE CHOKE HOLD ........................................ 2.95
IGNITION COIL W/SPARK PLUG CAP ............. 17.99
SPARK PLUG CAP ............................................. 2.25
SPARK PLUG ...................................................... 1.99
SIDECOVER W/ BRG & SEAL .......................... 12.00
CYLINDER ONLY .............................................. 59.95
CRANKSHAFT .................................................. 44.95
CAM TIMING GEAR ............................................ 6.95
BOLT CONNECTING ROD ................................. 0.99
CONNECTING ROD STOCK (3.303") ................ 8.00
PISTON PIN CIRCLIP ......................................... 3.00
PISTON WRIST PIN ............................................ 4.00
STD PISTON W/RINGS .................................... 16.14
.010 PISTON W/RINGS ..................................... 19.28
.020 PISTON W/RINGS ..................................... 22.28
.030 PISTON W/RINGS ..................................... 25.28
.040 PISTON W/RINGS ..................................... 28.35
PISTON ONLY - STD ........................................ 14.00
STD FLAT TOP PISTON ................................... 17.00
.010" FLAT TOP PISTON .................................. 20.00
.020" FLAT TOP PISTON .................................. 18.00
RINGS (STD) ....................................................... 6.99
.010 RINGS ......................................................... 6.00
.020 RINGS ......................................................... 9.00
.030 RINGS ....................................................... 12.00
.040 RINGS ....................................................... 15.00
.010" FILE FIT COMPRESSION RING ............. 12.00
.020" FILE FIT COMPRESSION RING ............. 12.00
CRANK BEARING ............................................... 8.00
OIL SEAL ............................................................. 3.15
HEAD GASKET ................................................... 5.75
GASKET (AIR BOX TO CARB) ........................... 2.95
GASKET (CARB TO INTAKE INSULAT .............. 0.95
GASKET (INTAKE INSULATOR TO HEAD ........ 1.10
GASKET (MUFFLER) .......................................... 1.10
GASKET (VALVE COVER) ................................. 2.89
GASKET (SIDE COVER) ..................................... 3.29
GASKET FLOAT BOWL ...................................... 2.50
STUD, CARB ....................................................... 0.95
STUD, HEADER .................................................. 0.95
OIL DIPSTICK ..................................................... 2.49
OIL FILL PLUG .................................................... 1.99
O RING FOR OIL DIPSTICK ............................... 0.38
OIL DRAIN PLUG & WASHER ............................ 0.95
BOLT (BLOWER HSG, BRACKETS) .................. 0.99
BOLT & WASHER (RECOIL STARTER) ............. 0.99
BOLT (IGNITION COIL) ....................................... 0.99
BOLT (HEAD) ...................................................... 0.99
BOLT (SIDECOVER) ........................................... 0.99
NUT (EXH HEADER STUD) ................................ 0.99
DOWELL PIN, HOLLOW (10MM CYL HEAD) ..... 0.95
DOWELL PIN, HOLLOW (8MM SIDE COVER) .. 0.95
EXHAUST STUD ................................................. 0.98
105

www.apskarting.com

Transcription

Similar documents

4 cycle accessories