Tarps Available - Kym Industries
Transcription
Tarps Available - Kym Industries
KYM INDUSTRIES, INC WE COVER YOUR LOAD 207 SMITH ROAD , SLOCOMB, ALABAMA 36375 TOLL FREE: 888-577-5218 FAX: 334-886-7108 ALUMINUM AND STEEL TARPING SYSTEMS MESH AND VINYL TARPS TARPS AVAILABLE Truck Tarps Dump Truck Tarps Trailer Tarps Chip Tarps Lumber Tarps Steel Tarps Agricultural Tarps DUMP TRUCK TARPS Finish Sizes: Two Sizes of Width: 7’ & 7’6” Match Standard Dump Truck Main Fabric: 1000Dx x 1000D 1000D x 1000D PVC Woven Mesh Color: Multi-color PVC coated polyester Mesh or Solid Black PVC Woven Mesh Double Stitched Seams and Pocket Vinyl fabric reinforced for stronger stretch for winding GALVANIZED STEEL SYSTEMS THE STEALTH Fits Dump Bodies up to 24 feet in Length Pre-assembled Underbody Spring Assembly Heavy Duty Galvanized SteelTubing System includes: Complete Galvanized Steel Arm Set with External Spring Mount Tarp Spool Assembly With Tomahawk Motor In-Cab Mount Switch Kit Options: Polished Aluminum Wind Deflector: Reduces the air flow under the tarp which keeps the tarp from flapping. Polished Aluminum Housing: Fully welded unit for complete protection ALUMINUM SYSTEMS THE PATRIOT Fits Dump Bodies up to 24 feet in Length Pre-assembled Underbody Spring Assembly Heavy Duty Galvanized Steel Tubing System includes: Complete Galvanized Steel Arm Set with External spring mount Tarp Spool Assembly with Tomahawk Motor In-Cab Mount Switch Kit Options: Polished Aluminum Wind Deflector: Reduces the air flow under the tarp which keeps the tarp from flapping · Polished Aluminum Housing: Fully welded unit for complete protection. ONE ARM ALUMINUM SYSTEMS THE TERMINATOR One Piece Flip Top Arm with a 30 Degree Bend (11’ Straight Arm with a 1’ Bend at 30 Degree Angle to total 12’) Mountain Tarp part #K0407B ¼” Thick side walls on the Extruded Aluminum Polished Arms that are also Anodized Aluminum. ¼” Thick Sidewalls on the Extruded Aluminum Polished Arms that are also Anodized Aluminum. ½” Both Top & Bottom Thickness Sidewalls on the Extruded Aluminum Polished Arms. This is a Single Piece Cross Over as is Mountain Tarps. This “Mountain Tarp” type arm is being used on both the Underbody and the External Clock Spring Tarp Systems. Once again no difference than Mountain Tarps. We replace the arms if broken at no cost to you. UNDERBODY SYSTEMS Underbody Spring Mount (Up to 28’) 84" Lower Arm Tarp Bows Tomahawk Motor Underbody Spring Mount (Up to 38’) 144" Lower Arm Tarp Bows Enforcer Super Duty Motor TOMAHAWK MOTOR TOMAHAWK 60:1 Plastic chrome cover used on most end dump trucks. 5-bolt mount (90-degree drive shaft is 3 3/4 inch long) Has a ¾ inch diameter shaft. Motor is used for faster tarp operation. THE ASSASSIN NEW SIDEROLL KIT AND PARTS CRANK KITS Applications: Systems available to cover any length box. System includes: Tarp Spool Assembly with the following features: Galvanized Steel Fold-Away Crank Handle. Aluminum Tarp Axle. Sealed Steel Mounting Bearings. Mounting Plates Options: Rear Pull Bar Assembly. Polished Aluminum Wind Deflector: Reduces the air flow under the tarp which keeps the tarp from flapping. Polished Aluminum Housing: Fully welded unit for complete protection. Standard Tarps: Black Mesh: Heavy duty mesh recommended for rock, sand and gravel. Solid Black Vinyl: Heavy duty, waterproof fabric for asphalt handling. PULL STYLE SYSTEMS THE SLING SHOT Applications: Covers lengths up to 26 feet with straight tarps. Covers lengths up to 20 feet if the tarp has side flaps. System includes: Fully Automatic Spring Return Tarp Spool Assembly. Rear Pull Bar with Latches. Pull Rope. Options: Polished Aluminum Wind Deflector: Reduces the air flow under the tarp which keeps the tarp from flapping. Polished Aluminum Housing: Fully welded unit for complete protection. MESH FABRICS Black or Multi-color Mesh PVC Coated Woven Multi Mesh PVC Woven Black Mesh Our mesh tarps are widely used in the industry, this mesh is of woven fabric, PVC coated polyester yarn is strong with high tear strength, it can be used to cover dump truck & transfer trailers. 100% WATERPROOF PVC Coated Woven Polyester High Density Woven polyester base with Vinyl coated waterproof Fabric Weight available: 18oz - 22oz per square yard Colors: Black, Red, Green, Blue