BeoPlay - STB Brackets

Transcription

COLLECTION 2014
BeoPlay V1
BeoPlay V1 32 & 40
Vertical Table Stand
The vertical table stand for BeoPlay V1 32 and 40 is
designed to make the TV screen vertical when placed on
top of a piece of furniture or inside a cabinet.
The heavy counterweight at the rear of the TV is designed to
allow cables to pass from behind or under the V1. Supplied with
adjustment feet to ensure a true vertical TV image.
DESIGNED FOR
BeoPlay V1 40
BeoPlay V1 32
AVAILABLE IN
Black
White
2
For technical specication and ordering, please visit www.stbbrackets.co.uk or telephone +441 522 522 400
BeoPlay V1
360°
BeoPlay V1 32 & 40
Rotating Table Stand
Rotating Table Stand for BeoPlay V1 has been designed to give the TV screen a vertical position
whilst also allowing screen rotation of 360 degrees. The compact foot print of the base is perfect for
positioning BeoPlay V1 on a narrow piece of furniture when the customer wishes to turn the screen.
The vertical side arms and the circular base are painted to colour match BeoPlay V1 and this stand is
offered for 32 and 40 models in Black or White.
Constructed to be compatible with the accessory mounting solutions within STB System 9, RTS adds
exibility to installations that require accessory boxes, games consoles or Blu-ray players.
DESIGNED FOR
BeoPlay V1 40
BeoPlay V1 32
AVAILABLE IN
Black
White
3
BeoPlay V1
BeoPlay V1 40
Gyro 16 Luxe
BeoPlay V1 40
Gyro 18 Luxe
BeoPlay V1 32
Gyro 15 Luxe
BeoPlay V1 40
Pull & Rotate
This elegant twin-arm bracket is manufactured
from solid natural nish, anodised aluminium
offering the highest quality solution for your
most demanding installations.
This elegant single-arm bracket is
manufactured from solid natural nish,
anodised aluminium offering the highest
quality solution for your most demanding
installations.
This elegant bracket is manufactured from
solid natural nish, anodised aluminium
offering the highest quality solution for
your most demanding installations.
Pull and Rotate wall mount with tilt, for Bang &
Olufsen BeoPlay V1 40. This unique wall
bracket allows the LCD display to be pulled
from the wall and rotated to either the left or
the right.
A removable 50mm cable cover allows the
connection cables to pass through the bracket
giving a beautiful appearance.
90°
5°
90°
Gyro 18 has a covered screw plate which
ensures that the xing screws are hidden from
view. In addition, the removable 50mm cable
cover allows the connection cables to pass
through the bracket giving a beautiful
appearance.
A removable 50mm cable cover allows the
connection cables to pass through the
bracket giving a beautiful appearance.
90°
1°
5°
There is tilt adjustment upwards of 1 degree and
downwards to 5 degrees. It is therefore possible
for the TV to be positioned (or parked) in the
corner of a room and then adjusted manually for
the optimum viewing angle.
With BeoPlay V1 40, the rotation angle is 45° to
the left and 45° to the right.
90°
1°
90°
90°
5°
1°
4
45°
5°
45°
1°
Photography Emillie Ferris
Professional Cycle Wear
Visible
Distinctive
Active
Reective
Jersey // Shorts // Jacket
More information & ordering...
www.STBbrackets.co.uk/BeoActive
BeoPlay V1
BeoPlay V1 32 & 40
Close Wall Bracket
BeoPlay V1 Close has been designed to
allow you to mount BeoPlay V1 32 & 40
to a gypsum dry wall or a wall that is not
of solid construction.
We have incorporated fixings to line up
with 300mm, 400mm, 620mm, 16" and
24" vertical fixing points within a hollow
wall.
As an extra feature, you can slide the
bracket sideways along horizontal fixing
slots to place the TV in the correct
position for your customer. You should
note that the suitability of safe and
secure fixings is the responsibility of the
installer.
BeoPlay V1 32 & 40
Ceiling Mount
The ceiling mount gives excellent
cable management with all cables
being hidden from sight inside the
pole. The single xing point on the
ceiling makes installation simple and
because the bracket allows rotation
of up to 360 degrees, you can ensure
that the correct viewing angle is
possible for your customer.
With 30 degree tilt the screen can be
adjusted for perfect viewing. The
stainless steel pole complements the
aluminium frame to give a beautiful
aesthetic appearance.
Ceiling mounts are available in 500mm
and 1000mm versions.
DESIGNED FOR
BeoPlay V1 40
BeoPlay V1 32
180°
180°
30°
DESIGNED FOR
BeoPlay V1 40
BeoPlay V1 32
6
0°
BeoPlay V1
BeoPlay V1 32 & 40
Floor Stand Adapter
This Floor Stand Adapter is designed to
allow a BeoPlay V1 to be mounted to the
oor stand for BeoVision 7 32 or
BeoVision 6 26 (4091, 4092 & 4098). The
bracket is supplied complete with the side
xing arms, internal secure rods, rear bar
and TV plate interface.
We do not supply the oor stand. The motor
function is not supported by BeoPlay V1 and
so the stand is rotated manually.
Tilt correction allows a screen angle
adjustment between -11 degrees and +8
degrees.
This bracket can also be used with Bang &
Olufsen original Wall Bracket 4095 & 4096
designed for BeoVision 7 32 or Wall Bracket
4093 designed for BeoVision 6 26.
11°
DESIGNED FOR
BeoPlay V1 40
BeoPlay V1 32
8°
7
BeoPlay A9
BeoPlay A9
Aluminium Replacement Legs
Black and Aluminium legs for BeoPlay A9 designed to perfectly
compliment the aesthetic design of the Bang & Olufsen BeoPlay
A9 HiFi. The legs are supplied as a complete Black or Aluminium
stand for BeoPlay A9. The dimensions of A9 with these
alumimium legs are identical to the A9 with wood legs.
The rear leg features internal cable management which locates the
electrical supply cable inside the leg. The cable is retained in position
with a rubber cable cover supplied with the set.
The combined effect of the cable management and striking colour
options adds to the already beautiful appearance of BeoPlay A9.
8
BeoPlay A8
BeoPlay A8
Corner Bracket
The exible wall mount
bracket for BeoPlay A8 allows
you to rotate your HiFi to the
best position for listening,
giving you the best possible
sound quality. The total range
of rotation is 90 degrees, 45
degrees to the left and 45
degrees to the right. If you
would like to mount BeoPlay
A8 in the corner of the room,
this is the perfect solution.
BeoPlay A8
Floor Stand
The bracket is designed with a
9 degree tilt angle to make our
bracket compatible with iPad,
iPad2 and iPad3.
The wall plate and arm are
beautifully manufactured from
high quality aluminium and
machined to match the nish of
the BeoPlay A8 front plate. We
have allowed for cable
management within the
underside of the arm to give a
pleasing visual presentation.
Floor Stand for BeoPlay A8 has
been designed to compliment the
visual aesthetic of this AirPlay
enabled stereo system.
When mounted to the stand, the top
of BeoPlay A8 is positioned 900mm
from the oor. The mains connection
cable can pass internally through the
25mm aluminium pole to give a wire
free installation.
45°
45°
9
COLLECTION 2013
BeoVision 12 65
Colours Available
Topaz, Silver & Black
BeoVision 12 65
Floor Mount & Table Mount
BeoVision 12 65
Pull & Rotate
Created for installations where it is not possible to
mount on a wall bracket. This xed Floor Mount does
not offer a tilt or rotate function and features a stainless
steel base with a pair of aluminium poles.
Custom install wall mount for BeoVision 12 65" is
based upon the successful pull and rotate used for
BeoVision 7 & BeoVision 4
The bracket moves forwards and backwards, allowing the
screen to rotate when pulled away from the wall. When
closed, the front of the screen is 128mm from the wall,
when fully extended, the screen is 584mm from the wall.
Maximum rotation is 40 degrees to the left and 40
degrees to the right. There is no tilt adjustment, but we
have incorporated a vertical compensation adjustment.
The rear cabinet is designed to contain BeoSystem 3 in the
centre of the cabinet, with space to mount other equipment.
This extremely elegant xed stand features internal cable
routing from the rear or from the underside of the stand.
The stand is also supplied with cable covers designed to
hide the cables from view.
Height - 1743mm
The strong aesthetic appeal of this stand is designed to
complement the speaker fret of BeoVision 12 and also
BeoLab 12.3 speakers.
Height - 1113mm
BeoVision 12 65
Low Furniture Stand
10
BeoVision 12 65
BeoVision 12 65
Floor Mount
Photo courtesy of Bang & Olufsen Luzern
11
BeoVision 11
BeoVision 11 55
Close Wall Bracket
BeoVision 11 55
GYRO 14 LUXE
BeoVision 11 55
Complete High Stand
BeoVision 11 55 Close has
been designed to allow you
to mount BeoVision 11 55 to
a gypsum dry wall or a wall
that is not of solid
construction.
Manufactured from solid natural nish anodised aluminium
offering the highest quality solution. Bracket movement
allows rotation up to 65 degrees to the left or right.
Designed to allow BeoVision 11 55 to be mounted in
a high position. The stand is supplied complete with
heavy cast iron base, aluminium cover plate, pole
and TV mounting plate.
We have incorporated fixings
to line up with 300mm, 400mm,
620mm, 16" and 24" vertical
fixing points within a hollow
wall. As an extra feature, you
can slide the bracket sideways
along horizontal fixing slots to
place the TV in the correct position
for your customer.
There is tilt adjustment upwards of 1 degree and downwards to
5 degrees. This bracket is ideal for corner mounting, or where
rotation to left and right is required or if the edge of the screen
needs to be pulled away from the wall.
To allow you to locate a decoder, games box,
movie server or Blu-ray player behind BeoVision 11,
you need to bring the TV forward. We have therefore
created an extension Kit - BV11 Extension Kit. The kit
includes a 20mm, 30mm and a 50mm extender. These can be
used individually or combined to give 100mm of extension.
65°
65°
5°
1°
12
BV11 55 Complete High Stand places the top of the
BeoVision 11 55 TV 1660mm from the oor (560mm to
bottom of TV).
BeoVision 11
BeoVision 11 55
Extended Rotation
The BeoVision 11 55 Extended Rotation has been
developed to give a rotation of 90 degrees to the left and
right, giving a total rotation of 180 degrees. There is 5
degree tilt function. Whilst the bracket is very large,
internal cable management does allow you to keep the rear
of the TV tidy.
The bracket is supplied with xing covers on the sides of the
wall plate and we have also created an opening within the wall
plate to allow cables to pass through the bracket and into the
double arm mechanism.
This bracket is ideal for corner mounting or where additional
rotation is required. The extended movement also allows the
television to be concealed within the wall and then pulled out
for viewing.
5°
90°
90°
0°
BeoVision 11 55
System 9
Modular Mounting System
All plates and brackets within System 9
are compatible with BeoVision 11 55 on
the Bang & Olufsen motor stands, STB
basic stands or STB Complete High Stand.
This allows you to mount up to 4 devices +
Blu-ray and NL/ML Convertor at the rear of
the TV to give maximum exibility.
BeoVision 11 55 with
System 9 - Brackets & Clamps
Panasonic Blu-ray, Sky Decoder
Cicso Network Router, PlayStation 3
BeoLink Converter NL/ML
Mount Devices
from leading vendors
+
+
BeoVision 11 46 mounted on
STBbrackets Basic Table Stand
with System 9 showing
Bang & Olufsen PlayMaker and
PlayStation 3 Super Slim
13
BeoVision 11
BeoVision 11 40 & 46
Close Wall Bracket
BeoVision 11 40/46 Close
has been designed to
allow you to mount
BeoVision 11 40/46 to a
gypsum dry wall or a wall
that is not of solid
construction.
We have incorporated fixings
to line up with 300mm,
400mm, 620mm, 16" and 24"
vertical fixing points within a
hollow wall.
GYRO 11 LUXE
GYRO 19 LUXE
LUXE Gyro 11 for BeoVision 11 40/46 twin arm solution.
Maximum Rotation of 90 degrees to the Left and Right. This
elegant model is manufactured from solid natural nish,
anodised aluminium offering the highest quality solution for
your most demanding installations.
The Gyro 19 for Beovision 11 40/46 offers a single arm
solution when up to 62° rotation is required to the left
or right. Machined from solid Aluminium, this bracket
offers the highest quality solution for your most
demanding installations.
When compressed, the screen is 163mm from the wall,
extending to 704mm when fully extended.
A cable management feature for Gyro 19 is the removable
50mm diameter cable cover. The centre of the cover is
55mm up from the lower edge of the wall plate. Removal
of the cover creates a 50mm diameter opening, which will
allow TV signal cables to pass through bracket into the
cable management tube.
Bracket movement allows rotation from the twin arm
mechanism. There is tilt adjustment upwards of 1 degree and
downwards to 5 degrees. Includes cable-management feature.
To allow you to locate a decoder,
games box, movie server or Blu-ray
player behind BeoVision 11, you need to
bring the TV forward. We have therefore
created an extension Kit - BV11 Extension Kit.
The kit includes a 20mm, 30mm and a 50mm
extender. These can be used individually or combined to give
100mm of extension.
40"
62°
62°
46"
52°
90°
52°
90°
5°
5°
1°
1°
v6
14
BeoVision 11
Pull & Rotate
Complete High Stand
Ceiling Mount
Pull and Rotate wall mount with tilt, for Bang & Olufsen
BeoVision 11 40/46. Allows the LCD display to be pulled
from the wall and rotated left or the right.
Designed to allow BeoVision 11 40/46 to be mounted in a
high position. The stand is supplied complete with heavy
cast iron base, aluminium cover plate, pole and TV
mounting plate.
Our ceiling mounts for BeoVision 11 offer a beautiful and
very exible mounting solution for bedroom and kitchen
viewing. The TV can rotate through 360 degrees and the
screen can tilt down from vertical, up to 15 degrees.
BeoVision 11 40 : BV11 CHS places the top of the BeoVision
11 40 TV 1845mm from the oor (953mm to bottom of TV).
This ceiling mount gives more exibility than has been
possible with our wall mounting brackets. The TV
connection cables and MasterLink cable can be concealed
within the brushed stainless steel tube, giving a "wire free"
presentation within the room.
There is tilt adjustment upwards of 1 degree and
downwards to 5 degrees.
This bracket is the perfect solution if you would like to wall
mount a decoder, games console or a Blu-ray player behind
the TV.
BeoVision 11 46 : BV11 CHS places the top of the BeoVision
11 46 TV 1920mm from the oor (953mm to bottom of TV).
With BeoVision 11 40, the rotation angle is 52 degrees left
and 52 degrees right.
We can make a “Customised Height” version of CHS if your
installation requires a shorter pole. Please tell us the height that
the top of the TV is to be positioned from the oor OR the
distance from the oor to the bottom of the TV. We will calculate
the pole length for you.
With BeoVision 11 46, the rotation angle is 43 degrees left
and 43 degrees right.
When closed, the screen is 130mm from the wall, when fully
extended, the screen is 450mm from the wall.
180°
180°
40"
52°
30°
52°
0°
46"
43°
43°
5°
v6
1°
15
BeoVision 10
Complete High Stand
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
Designed to allow BeoVision 10 to be
mounted in a high position. The stand is
supplied complete with heavy cast iron base,
aluminium cover plate, pole and TV
mounting plate.
We have incorporated xings to line up with
300mm, 400mm and 625mm vertical xing
points within a hollow wall. To allow additional
equipment to be positioned behind BeoVision
10, we have made an extension kit that allows
up to 129mm of space behind the TV.
BeoVision 10 46: Top of the TV 1980mm from
the oor (930mm to bottom of TV).
GYRO 14 LUXE
Maximum Rotation of 90 degrees to the Left
and Right (80 degrees for BeoVision 10 46),
from our advanced manual wall bracket.
This elegant model is manufactured from solid
natural nish, anodised aluminium, and offers
the highest quality solution for your most
90°
Close Wall Bracket
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
STB - System 9
System 9 uses our STB-c-1 clamp combined
with a range of plates to allow up to four
decoder and accessory boxes to be mounted
to the oor stand. We have a range of
BeoVision 10 mounts to allow Blu-Ray players
to be mounted directly to the TV cabinet.
Use the Product Conguration tool at
www.stbbrackets.co.uk to select the correct
bracket conguration for your installation.
90°
5°
1°
16
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
This bracket has been designed to allow you
to mount BeoVision 10 40 & BeoVision 10 46
to a gypsum dry wall or a wall that is not of
solid construction.
BeoVision 10 40: Top of the TV 1890mm from
the oor (930mm to bottom of TV).
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
BeoVision 10
Basic Floor Stand
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
Pull & Rotate
The basic oor stand is offered for customers
who do not want any rotation or tilt.
Custom install Pull and Rotate wall mount for
BeoVision 10. This unique wall bracket
allows the Plasma display to be pulled from
the wall and rotated up to 52 degrees.
The stand is nished in a black paint. It is
possible to add the original Bang & Olufsen
aluminium cover plate from the motor oor
stand. The top of the TV is 1150mm for
BeoVision 10 46 & 1050mm for BeoVision 10 40.
A very popular solution for BeoVision 7, it is
now possible to position BeoVision 10 in a
corner or to mount within a recess, enabling a
manually adjusted optimum viewing angle.
52°
43°
52°
43°
40"
Samsung & Panasonic Blu-ray
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
46"
Ceiling Mount
DESIGNED FOR
BeoVision 10 40
BeoVision 10 46
The TV can rotate through 360 degrees and
the screen can tilt down from vertical up to
20 degrees.
Our range of options for Samsung &
Panasonic Bluray players allows you to
mount Samsung’s BD-ES7000 & Panasonic’s
DMP BBT-01. These players are very slim and
can also be operated with Beo4, Beo5 and
Beo6 using PUC codes.
To select the correct brackets for your BeoVision
10, we recommend that you use our Product
Conguration tool.
Panasonic
DMP-BBT01
To allow you to build a solution matched to your
installation, we offer a custom length service for
our ceiling mounts - the total pole dimension
can be up to 1400mm. We are able to help with
selecting the correct pole length, simply send
us an email.
180°
30°
180°
0°
Samsung
BD-D7500
17
BeoVision 10
BeoVision 10 32
Complete High Stand
DESIGNED FOR
BeoVision 10 32
Places the top of the TV 1800mm from the
oor (1060mm to bottom of TV). We can
make a “Customised Height” version of
Complete High Stand if your installation
requires a shorter pole.
GYRO 13 LUXE
Maximum Rotation of 90 degrees to the
Left and Right, with downward tilt of 5
degrees. This is our most advanced
manual wall bracket in function and design.
This elegant model is manufactured from
solid natural nish, anodised aluminium, and
offers the highest quality solution for your
Basic Floor Stand
Basic Table Stand
There is no ability to tilt or rotate the screen.
Both versions are painted black, where the
circular base is nished in the high quality
matt nish Bang & Olufsen soft touch black
paint. The support pole is 100% compatible
with STB System 9
DESIGNED FOR
BeoVision 10 32
BeoVision 10 32
Pull & Rotate
This popular wall bracket allows the LCD
display to be pulled from the wall & rotated
up to 90 degrees to the Left & the Right.
This is the same base bracket as used for
BeoVision 6 and BeoVision 8, allowing
customer upgrades by changing the TV plate.
90°
90°
90°
90°
0°
5°
0°
1°
18
DESIGNED FOR
BeoVision 10 32
We have two basic stand options for
BeoVision 10 32, one high and one low.
Tell us the height that the top of the TV is to be
positioned from the oor OR the distance from
the oor to the bottom of the TV. We will
calculate the pole length for you. When you
order, please add this extra information to the
"special instructions" box on your order or
email this information to us.
BeoVision 10 32
BeoVision 10 32
DESIGNED FOR
BeoVision 10 32
BeoVision 10
BeoVision 10 32
Close Wall Mount
BeoVision 10 32
DESIGNED FOR
BeoVision 10 32
System 9
Designed for gypsum dry wall or mounting to
a poor quality wall.
All plates and brackets within System 9 are
compatible with BeoVision 10 32 on the Bang
& Olufsen motor stands, STB basic stands or
Bang & Olufsen tall oor stand 4187.
This is a close tting solution where no
movement is required. We have incorporated
xings to line up with 300mm, 400mm, 620mm,
16” and 24” vertical xing points within a hollow
‘stud’ wall, giving excellent exibility.
BeoVision 10 32
Samsung & Panasonic Blu-ray
DESIGNED FOR
BeoVision 10 32
This allows you to mount up to 4 devices at the
rear of the TV to give maximum exibility.
BeoVision 10 32
DESIGNED FOR
BeoVision 10 32
Ceiling Mount
Our range of options for Samsung &
Panasonic Bluray players allows you to
mount Samsung’s BD-ES7000 & Panasonic’s
DMP BBT-01. These players are very slim and
can also be operated with Beo4, Beo5 and
Beo6 using PUC codes.
DESIGNED FOR
BeoVision 10 32
Our ceiling mounts give a very exible
mounting solution for bedroom and kitchen
viewing. The TV can rotate through 360
degrees and the screen can tilt down from
vertical, up to 15 degrees. This ceiling mount
gives more exibility than has been possible
with our wall mounting brackets.
To select the correct brackets for your BeoVision
10 32”, we recommend that you use our Product
Conguration tool.
Panasonic
DMP-BBT01
The TV connection cables and MasterLink
cable can be concealed within the brushed
stainless steel tube, giving a “wire free”
presentation within the room.
180°
30°
180°
0°
Samsung
BD-D7500
19
BeoVision 7
STB BV7 40 Close
20
Photo courtesy of Bang & Olufsen Singapore
BeoVision 7
BeoVision 7 55
Extended Rotation
BV7 55 ER has been developed to give a
rotation of 90 degrees to the left and right
when the television is combined with BeoLab
7.6, giving a total rotation of 180 degrees.
DESIGNED FOR
BeoVision 7 55 ONLY
BeoVision 7 55 & BeoLab 7.6
BeoVision 7 55 & BeoLab 10
There is not a tilt function. Visually, the bracket
is nished in the same soft touch black paint
that is used on the rear cabinet of 7 55. Internal
cable management does allow you to keep the
rear of the TV tidy.
BeoVision 7 55
Pull & Rotate
This heavy duty version of the Pull and
Rotate series allows forward movement of
the TV and rotation of the screen (and
speaker). No screen tilt.
DESIGNED FOR
BeoVision 7 55 (ONLY)
BeoVision 7 55 & BeoLab 7.6 (or BeoLab 7.2)
The TV can be pulled forward by 350mm from
its closed position. Maximum rotation with a
BeoLab 7.6 is 33 degrees to the left and right.
With BeoLab 10, BeoLab 7.2 or without a
speaker, maximum rotation is increased to 43
degrees
33°
90°
33°
90°
BeoVision 7 55
Close LUXE
Manufactured from solid natural nish,
anodised aluminium, this bracket is the
highest quality solution for your most
Designed to minimise the distance that the
Bang & Olufsen 55” LCD TV is located from the
wall.
200mm
DESIGNED FOR
BeoVision 7 55
Optional BeoLab 7.6 support, BLab7.6 CLOSE 220
Optional BeoLab 7.4 support, BLab7.4 CLOSE 195
BeoVision 7 55
BeoLab 10 with BeoVision 7 55
DESIGNED FOR
BeoVision 7 55 ONLY
Designed to combine BeoLab 10 with
BeoVision 7 55 (and BV7 40), to produce a
beautiful combination which many dealers
will instantly recognise as an iconic design.
This black anodised adapter is designed for
use with Vertical Floor Stand 4656. 10MS40
xes to the standard BeoLab 7.4 speaker
hanger (3151916) which is supplied by Bang &
Olufsen with the stand.
21
BeoVision 7
DESIGNED FOR
BeoVision 7 40
Pull & Rotate
Pull and Rotate wall mount for Bang &
Olufsen BeoVision 7 40. This heavy duty
version of the Pull and Rotate series allows
forwards movement of the TV and rotation of
the screen (and speaker).
BeoVision 7 40 (ONLY)
BeoVision 7 40 & BeoLab 7.6 (or BeoLab 7.2)
The TV can be pulled forward by 350mm from
its closed position. Maximum rotation with a
BeoLab 7.6 tted is 33 degrees to the left and
right.
630mm
285mm
33°
33°
BeoVision 7 40
GYRO 12 LUXE
Maximum rotation of up to 90 degrees from
our most advanced manual wall bracket. This
elegant model is manufactured from solid
natural nish, anodised aluminium, and
offers the highest quality solution for your
Bracket movement allows rotation from the
double arm mechanism, turning the TV up to 90
degrees to either the left or the right.
DESIGNED FOR
BeoVision 7 40 ONLY
BeoVision 7 40
Ceiling Mount
Our ceiling mount offers a beautiful and
very exible mounting solution for B&O
bedroom and kitchen viewing. The Bang &
Olufsen TV can rotate through 360 degrees
and the screen can tilt down from vertical
up to 30 degrees.
The TV connection cables and MasterLink
cable can be concealed within the brushed
stainless steel tube.
90°
30°
180°
90°
5°
180°
1°
22
0°
DESIGNED FOR
BeoVision 7 40 ONLY
BeoVision 7
BeoVision 7 40
BeoLab 10 with BeoVision 7 40
Designed to combine BeoLab 10 with
BeoVision 7 55 (and BV7 40), to produce a
beautiful combination which many dealers will
instantly recognise as an iconic design.
DESIGNED FOR
BeoVision 7 40 ONLY
This black anodised adapter is designed for use
with Vertical Floor Stand 4041. 10MS40 xes to
the standard BeoLab 7.4 speaker hanger
(3151916) which is supplied by Bang & Olufsen
with the stand.
BeoVision 7 40
Close Wall Bracket LUXE
Manufactured from solid natural nish,
anodised aluminium, this bracket is the
highest quality solution for your most
Designed to minimise the distance that the
Bang & Olufsen 40” LCD TV is located from
the wall.
200mm
DESIGNED FOR
BeoVision 7 40 ONLY
BeoVision 7 40
Close Wall Bracket | Service Tool
DESIGNED FOR
BeoVision 7 40
This xed position solution minimises the
distance that the Bang & Olufsen 40” LCD TV
is located from the wall.
We supply an optional Service Tool to allow you
to x the cables to the rear of BeoVision 7 40
and then position the TV close to the wall.
Close speaker brackets are also available.
205mm
23

BeoPlay - STB Brackets

Transcription

Similar documents

April 15, 2007 - 610-0029 and 610

Brochure and technical specifications

Installation Guides- RoofTrac® Rail System, Bonding Grounding

ECLIPSE ECLIPSE

User Manual

R8-TB REV 1B

WLS AWL Series - WLS Lighting Systems

RB25DET Quest Alternator Retrofit Bracket

SLIMLIGHT:

Sentinel handguard mounting Arctic Cat ZR chassis 34450 Sentinel